From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: From: Greg Kroah-Hartman To: linux-kernel@vger.kernel.org Cc: Greg Kroah-Hartman , stable@vger.kernel.org, Mauro Carvalho Chehab Subject: [PATCH 4.14 187/222] media: em28xx: make v4l2-compliance happier by starting sequence on zero Date: Sun, 11 Nov 2018 14:24:44 -0800 Message-Id: <20181111221703.688488683@linuxfoundation.org> In-Reply-To: <20181111221647.665769131@linuxfoundation.org> References: <20181111221647.665769131@linuxfoundation.org> MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Sender: linux-kernel-owner@vger.kernel.org List-ID: 4.14-stable review patch. If anyone has any objections, please let me know. ------------------ From: Mauro Carvalho Chehab commit afeaade90db4c5dab93f326d9582be1d5954a198 upstream. The v4l2-compliance tool complains if a video doesn't start with a zero sequence number. While this shouldn't cause any real problem for apps, let's make it happier, in order to better check the v4l2-compliance differences before and after patchsets. This is actually an old issue. It is there since at least its videobuf2 conversion, e. g. changeset 3829fadc461 ("[media] em28xx: convert to videobuf2"), if VB1 wouldn't suffer from the same issue. Cc: stable@vger.kernel.org Fixes: d3829fadc461 ("[media] em28xx: convert to videobuf2") Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Greg Kroah-Hartman --- drivers/media/usb/em28xx/em28xx-video.c | 2 ++ 1 file changed, 2 insertions(+) --- a/drivers/media/usb/em28xx/em28xx-video.c +++ b/drivers/media/usb/em28xx/em28xx-video.c @@ -900,6 +900,8 @@ static int em28xx_enable_analog_tuner(st if (!mdev || !v4l2->decoder) return 0; + dev->v4l2->field_count = 0; + /* * This will find the tuner that is connected into the decoder. * Technically, this is not 100% correct, as the device may be