From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: From: Greg Kroah-Hartman To: linux-kernel@vger.kernel.org Cc: Greg Kroah-Hartman , stable@vger.kernel.org, Keerthy , Dave Gerlach , Viresh Kumar Subject: [PATCH 4.19 027/110] opp: ti-opp-supply: Dynamically update u_volt_min Date: Thu, 29 Nov 2018 15:11:58 +0100 Message-Id: <20181129135922.358073617@linuxfoundation.org> In-Reply-To: <20181129135921.231283053@linuxfoundation.org> References: <20181129135921.231283053@linuxfoundation.org> MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Sender: linux-kernel-owner@vger.kernel.org List-ID: 4.19-stable review patch. If anyone has any objections, please let me know. ------------------ From: Keerthy commit ba038546ff9e15d54d1134b5c5d2355648c00dec upstream. The voltage range (min, max) provided in the device tree is from the data manual and is pretty big, catering to a wide range of devices. On a i2c read/write failure the regulator_set_voltage_triplet function falls back to set voltage between min and max. The min value from Device Tree can be lesser than the optimal value and in that case that can lead to a hang or crash. Hence set the u_volt_min dynamically to the optimal voltage value. Cc: 4.16+ # v4.16+ Fixes: 9a835fa6e47 ("PM / OPP: Add ti-opp-supply driver") Signed-off-by: Keerthy Acked-by: Dave Gerlach Signed-off-by: Viresh Kumar Signed-off-by: Greg Kroah-Hartman --- drivers/opp/ti-opp-supply.c | 3 +++ 1 file changed, 3 insertions(+) --- a/drivers/opp/ti-opp-supply.c +++ b/drivers/opp/ti-opp-supply.c @@ -290,6 +290,9 @@ static int ti_opp_supply_set_opp(struct vdd_uv = _get_optimal_vdd_voltage(dev, &opp_data, new_supply_vbb->u_volt); + if (new_supply_vdd->u_volt_min < vdd_uv) + new_supply_vdd->u_volt_min = vdd_uv; + /* Scaling up? Scale voltage before frequency */ if (freq > old_freq) { ret = _opp_set_voltage(dev, new_supply_vdd, vdd_uv, vdd_reg,