From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mail.kernel.org ([198.145.29.99]:49102 "EHLO mail.kernel.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1729959AbeLFOo0 (ORCPT ); Thu, 6 Dec 2018 09:44:26 -0500 From: Greg Kroah-Hartman To: linux-kernel@vger.kernel.org Cc: Greg Kroah-Hartman , stable@vger.kernel.org, Michael Guralnik , Majd Dibbiny , Leon Romanovsky , Jason Gunthorpe Subject: [PATCH 4.9 017/101] IB/mlx5: Avoid load failure due to unknown link width Date: Thu, 6 Dec 2018 15:38:16 +0100 Message-Id: <20181206143012.584673424@linuxfoundation.org> In-Reply-To: <20181206143011.174892052@linuxfoundation.org> References: <20181206143011.174892052@linuxfoundation.org> MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Sender: stable-owner@vger.kernel.org List-ID: 4.9-stable review patch. If anyone has any objections, please let me know. ------------------ From: Michael Guralnik commit db7a691a1551a748cb92d9c89c6b190ea87e28d5 upstream. If the firmware reports a connection width that is not 1x, 4x, 8x or 12x it causes the driver to fail during initialization. To prevent this failure every time a new width is introduced to the RDMA stack, we will set a default 4x width for these widths which ar unknown to the driver. This is needed to allow to run old kernels with new firmware. Cc: # 4.1 Fixes: 1b5daf11b015 ("IB/mlx5: Avoid using the MAD_IFC command under ISSI > 0 mode") Signed-off-by: Michael Guralnik Reviewed-by: Majd Dibbiny Signed-off-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe Signed-off-by: Greg Kroah-Hartman --- drivers/infiniband/hw/mlx5/main.c | 29 +++++++++++------------------ 1 file changed, 11 insertions(+), 18 deletions(-) --- a/drivers/infiniband/hw/mlx5/main.c +++ b/drivers/infiniband/hw/mlx5/main.c @@ -710,31 +710,26 @@ enum mlx5_ib_width { MLX5_IB_WIDTH_12X = 1 << 4 }; -static int translate_active_width(struct ib_device *ibdev, u8 active_width, +static void translate_active_width(struct ib_device *ibdev, u8 active_width, u8 *ib_width) { struct mlx5_ib_dev *dev = to_mdev(ibdev); - int err = 0; - if (active_width & MLX5_IB_WIDTH_1X) { + if (active_width & MLX5_IB_WIDTH_1X) *ib_width = IB_WIDTH_1X; - } else if (active_width & MLX5_IB_WIDTH_2X) { - mlx5_ib_dbg(dev, "active_width %d is not supported by IB spec\n", - (int)active_width); - err = -EINVAL; - } else if (active_width & MLX5_IB_WIDTH_4X) { + else if (active_width & MLX5_IB_WIDTH_4X) *ib_width = IB_WIDTH_4X; - } else if (active_width & MLX5_IB_WIDTH_8X) { + else if (active_width & MLX5_IB_WIDTH_8X) *ib_width = IB_WIDTH_8X; - } else if (active_width & MLX5_IB_WIDTH_12X) { + else if (active_width & MLX5_IB_WIDTH_12X) *ib_width = IB_WIDTH_12X; - } else { - mlx5_ib_dbg(dev, "Invalid active_width %d\n", + else { + mlx5_ib_dbg(dev, "Invalid active_width %d, setting width to default value: 4x\n", (int)active_width); - err = -EINVAL; + *ib_width = IB_WIDTH_4X; } - return err; + return; } static int mlx5_mtu_to_ib_mtu(int mtu) @@ -842,10 +837,8 @@ static int mlx5_query_hca_port(struct ib if (err) goto out; - err = translate_active_width(ibdev, ib_link_width_oper, - &props->active_width); - if (err) - goto out; + translate_active_width(ibdev, ib_link_width_oper, &props->active_width); + err = mlx5_query_port_ib_proto_oper(mdev, &props->active_speed, port); if (err) goto out;