From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
stable@vger.kernel.org,
Takashi Sakamoto <o-takashi@sakamocchi.jp>,
Takashi Iwai <tiwai@suse.de>, Sasha Levin <sashal@kernel.org>
Subject: [PATCH 4.9 31/39] ALSA: bebob: fix model-id of unit for Apogee Ensemble
Date: Thu, 24 Jan 2019 20:20:34 +0100 [thread overview]
Message-ID: <20190124190449.358802494@linuxfoundation.org> (raw)
In-Reply-To: <20190124190448.232316246@linuxfoundation.org>
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 644b2e97405b0b74845e1d3c2b4fe4c34858062b ]
This commit fixes hard-coded model-id for an unit of Apogee Ensemble with
a correct value. This unit uses DM1500 ASIC produced ArchWave AG (formerly
known as BridgeCo AG).
I note that this model supports three modes in the number of data channels
in tx/rx streams; 8 ch pairs, 10 ch pairs, 18 ch pairs. The mode is
switched by Vendor-dependent AV/C command, like:
$ cd linux-firewire-utils
$ ./firewire-request /dev/fw1 fcp 0x00ff000003dbeb0600000000 (8ch pairs)
$ ./firewire-request /dev/fw1 fcp 0x00ff000003dbeb0601000000 (10ch pairs)
$ ./firewire-request /dev/fw1 fcp 0x00ff000003dbeb0602000000 (18ch pairs)
When switching between different mode, the unit disappears from IEEE 1394
bus, then appears on the bus with different combination of stream formats.
In a mode of 18 ch pairs, available sampling rate is up to 96.0 kHz, else
up to 192.0 kHz.
$ ./hinawa-config-rom-printer /dev/fw1
{ 'bus-info': { 'adj': False,
'bmc': True,
'chip_ID': 21474898341,
'cmc': True,
'cyc_clk_acc': 100,
'generation': 2,
'imc': True,
'isc': True,
'link_spd': 2,
'max_ROM': 1,
'max_rec': 512,
'name': '1394',
'node_vendor_ID': 987,
'pmc': False},
'root-directory': [ ['HARDWARE_VERSION', 19],
[ 'NODE_CAPABILITIES',
{ 'addressing': {'64': True, 'fix': True, 'prv': False},
'misc': {'int': False, 'ms': False, 'spt': True},
'state': { 'atn': False,
'ded': False,
'drq': True,
'elo': False,
'init': False,
'lst': True,
'off': False},
'testing': {'bas': False, 'ext': False}}],
['VENDOR', 987],
['DESCRIPTOR', 'Apogee Electronics'],
['MODEL', 126702],
['DESCRIPTOR', 'Ensemble'],
['VERSION', 5297],
[ 'UNIT',
[ ['SPECIFIER_ID', 41005],
['VERSION', 65537],
['MODEL', 126702],
['DESCRIPTOR', 'Ensemble']]],
[ 'DEPENDENT_INFO',
[ ['SPECIFIER_ID', 2037],
['VERSION', 1],
[(58, 'IMMEDIATE'), 16777159],
[(59, 'IMMEDIATE'), 1048576],
[(60, 'IMMEDIATE'), 16777159],
[(61, 'IMMEDIATE'), 6291456]]]]}
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
sound/firewire/bebob/bebob.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sound/firewire/bebob/bebob.c b/sound/firewire/bebob/bebob.c
index d0dfa822266b..3b4eaffe4a7f 100644
--- a/sound/firewire/bebob/bebob.c
+++ b/sound/firewire/bebob/bebob.c
@@ -434,7 +434,7 @@ static const struct ieee1394_device_id bebob_id_table[] = {
/* Apogee Electronics, DA/AD/DD-16X (X-FireWire card) */
SND_BEBOB_DEV_ENTRY(VEN_APOGEE, 0x00010048, &spec_normal),
/* Apogee Electronics, Ensemble */
- SND_BEBOB_DEV_ENTRY(VEN_APOGEE, 0x00001eee, &spec_normal),
+ SND_BEBOB_DEV_ENTRY(VEN_APOGEE, 0x01eeee, &spec_normal),
/* ESI, Quatafire610 */
SND_BEBOB_DEV_ENTRY(VEN_ESI, 0x00010064, &spec_normal),
/* AcousticReality, eARMasterOne */
--
2.19.1
next prev parent reply other threads:[~2019-01-24 20:05 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-24 19:20 [PATCH 4.9 00/39] 4.9.153-stable review Greg Kroah-Hartman
2019-01-24 19:20 ` [PATCH 4.9 01/39] r8169: Add support for new Realtek Ethernet Greg Kroah-Hartman
2019-01-24 19:20 ` [PATCH 4.9 02/39] ipv6: Consider sk_bound_dev_if when binding a socket to a v4 mapped address Greg Kroah-Hartman
2019-01-24 19:20 ` [PATCH 4.9 03/39] ipv6: Take rcu_read_lock in __inet6_bind for mapped addresses Greg Kroah-Hartman
2019-01-24 19:20 ` [PATCH 4.9 04/39] platform/x86: asus-wmi: Tell the EC the OS will handle the display off hotkey Greg Kroah-Hartman
2019-01-24 19:20 ` [PATCH 4.9 05/39] e1000e: allow non-monotonic SYSTIM readings Greg Kroah-Hartman
2019-01-24 19:20 ` [PATCH 4.9 06/39] writeback: dont decrement wb->refcnt if !wb->bdi Greg Kroah-Hartman
2019-01-24 19:20 ` [PATCH 4.9 07/39] serial: set suppress_bind_attrs flag only if builtin Greg Kroah-Hartman
2019-01-24 19:20 ` [PATCH 4.9 08/39] ALSA: oxfw: add support for APOGEE duet FireWire Greg Kroah-Hartman
2019-01-24 19:20 ` [PATCH 4.9 09/39] MIPS: SiByte: Enable swiotlb for SWARM, LittleSur and BigSur Greg Kroah-Hartman
2019-01-24 19:20 ` [PATCH 4.9 10/39] arm64: perf: set suppress_bind_attrs flag to true Greg Kroah-Hartman
2019-01-24 19:20 ` [PATCH 4.9 11/39] selinux: always allow mounting submounts Greg Kroah-Hartman
2019-01-24 19:20 ` [PATCH 4.9 12/39] rxe: IB_WR_REG_MR does not capture MRs iova field Greg Kroah-Hartman
2019-01-24 19:20 ` [PATCH 4.9 13/39] jffs2: Fix use of uninitialized delayed_work, lockdep breakage Greg Kroah-Hartman
2019-01-24 19:20 ` [PATCH 4.9 14/39] pstore/ram: Do not treat empty buffers as valid Greg Kroah-Hartman
2019-01-24 19:20 ` [PATCH 4.9 15/39] powerpc/xmon: Fix invocation inside lock region Greg Kroah-Hartman
2019-01-24 19:20 ` [PATCH 4.9 16/39] powerpc/pseries/cpuidle: Fix preempt warning Greg Kroah-Hartman
2019-01-24 19:20 ` [PATCH 4.9 17/39] media: firewire: Fix app_info parameter type in avc_ca{,_app}_info Greg Kroah-Hartman
2019-01-24 19:20 ` [PATCH 4.9 18/39] net: call sk_dst_reset when set SO_DONTROUTE Greg Kroah-Hartman
2019-01-24 19:20 ` [PATCH 4.9 19/39] scsi: target: use consistent left-aligned ASCII INQUIRY data Greg Kroah-Hartman
2019-01-24 19:20 ` [PATCH 4.9 20/39] clk: imx6q: reset exclusive gates on init Greg Kroah-Hartman
2019-01-24 19:20 ` [PATCH 4.9 21/39] kconfig: fix file name and line number of warn_ignored_character() Greg Kroah-Hartman
2019-01-24 19:20 ` [PATCH 4.9 22/39] kconfig: fix memory leak when EOF is encountered in quotation Greg Kroah-Hartman
2019-01-24 19:20 ` [PATCH 4.9 23/39] mmc: atmel-mci: do not assume idle after atmci_request_end Greg Kroah-Hartman
2019-01-24 19:20 ` [PATCH 4.9 24/39] tty/serial: do not free trasnmit buffer page under port lock Greg Kroah-Hartman
2019-01-24 19:20 ` [PATCH 4.9 25/39] perf intel-pt: Fix error with config term "pt=0" Greg Kroah-Hartman
2019-01-24 19:20 ` [PATCH 4.9 26/39] perf svghelper: Fix unchecked usage of strncpy() Greg Kroah-Hartman
2019-01-24 19:20 ` [PATCH 4.9 27/39] perf parse-events: " Greg Kroah-Hartman
2019-01-24 19:20 ` [PATCH 4.9 28/39] dm kcopyd: Fix bug causing workqueue stalls Greg Kroah-Hartman
2019-01-24 19:20 ` [PATCH 4.9 29/39] tools lib subcmd: Dont add the kernel sources to the include path Greg Kroah-Hartman
2019-01-24 19:20 ` [PATCH 4.9 30/39] dm snapshot: Fix excessive memory usage and workqueue stalls Greg Kroah-Hartman
2019-01-24 19:20 ` Greg Kroah-Hartman [this message]
2019-01-24 19:20 ` [PATCH 4.9 32/39] sysfs: Disable lockdep for driver bind/unbind files Greg Kroah-Hartman
2019-01-24 19:20 ` [PATCH 4.9 33/39] scsi: smartpqi: correct lun reset issues Greg Kroah-Hartman
2019-01-24 19:20 ` [PATCH 4.9 34/39] scsi: megaraid: fix out-of-bound array accesses Greg Kroah-Hartman
2019-01-24 19:20 ` [PATCH 4.9 35/39] ocfs2: fix panic due to unrecovered local alloc Greg Kroah-Hartman
2019-01-24 19:20 ` [PATCH 4.9 36/39] mm/page-writeback.c: dont break integrity writeback on ->writepage() error Greg Kroah-Hartman
2019-01-24 19:20 ` [PATCH 4.9 37/39] mm, proc: be more verbose about unstable VMA flags in /proc/<pid>/smaps Greg Kroah-Hartman
2019-01-24 19:20 ` [PATCH 4.9 38/39] ipmi:ssif: Fix handling of multi-part return messages Greg Kroah-Hartman
2019-01-24 19:20 ` [PATCH 4.9 39/39] locking/qspinlock: Pull in asm/byteorder.h to ensure correct endianness Greg Kroah-Hartman
2019-01-25 14:43 ` [PATCH 4.9 00/39] 4.9.153-stable review shuah
2019-01-25 16:28 ` Naresh Kamboju
2019-01-25 23:17 ` Guenter Roeck
2019-01-26 12:07 ` Jon Hunter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190124190449.358802494@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=o-takashi@sakamocchi.jp \
--cc=sashal@kernel.org \
--cc=stable@vger.kernel.org \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).