From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Philipp Zabel <p.zabel@pengutronix.de>,
Sasha Levin <sashal@kernel.org>,
dri-devel@lists.freedesktop.org
Subject: [PATCH AUTOSEL 4.14 01/27] drm/imx: ignore plane updates on disabled crtcs
Date: Mon, 11 Mar 2019 15:57:58 -0400 [thread overview]
Message-ID: <20190311195824.139043-1-sashal@kernel.org> (raw)
From: Philipp Zabel <p.zabel@pengutronix.de>
[ Upstream commit 4fb873c9648e383206e0a91cef9b03aa54066aca ]
This patch fixes backtraces like the following when sending SIGKILL to a
process with a currently pending plane update:
[drm:ipu_plane_atomic_check] CRTC should be enabled
[drm:drm_framebuffer_remove] *ERROR* failed to commit
------------[ cut here ]------------
WARNING: CPU: 3 PID: 63 at drivers/gpu/drm/drm_framebuffer.c:926 drm_framebuffer_remove+0x47c/0x498
atomic remove_fb failed with -22
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/imx/ipuv3-plane.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/imx/ipuv3-plane.c b/drivers/gpu/drm/imx/ipuv3-plane.c
index cf98596c7ce1..d0d7f6adbc89 100644
--- a/drivers/gpu/drm/imx/ipuv3-plane.c
+++ b/drivers/gpu/drm/imx/ipuv3-plane.c
@@ -348,9 +348,9 @@ static int ipu_plane_atomic_check(struct drm_plane *plane,
if (ret)
return ret;
- /* CRTC should be enabled */
+ /* nothing to check when disabling or disabled */
if (!crtc_state->enable)
- return -EINVAL;
+ return 0;
switch (plane->type) {
case DRM_PLANE_TYPE_PRIMARY:
--
2.19.1
next reply other threads:[~2019-03-11 19:58 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-11 19:57 Sasha Levin [this message]
2019-03-11 19:57 ` [PATCH AUTOSEL 4.14 02/27] gpu: ipu-v3: Fix i.MX51 CSI control registers offset Sasha Levin
2019-03-11 19:58 ` [PATCH AUTOSEL 4.14 03/27] drm/imx: imx-ldb: add missing of_node_puts Sasha Levin
2019-03-11 19:58 ` [PATCH AUTOSEL 4.14 04/27] gpu: ipu-v3: Fix CSI offsets for imx53 Sasha Levin
2019-03-11 19:58 ` [PATCH AUTOSEL 4.14 05/27] s390/dasd: fix using offset into zero size array error Sasha Levin
2019-03-11 19:58 ` [PATCH AUTOSEL 4.14 06/27] Input: pwm-vibra - prevent unbalanced regulator Sasha Levin
2019-03-11 19:58 ` [PATCH AUTOSEL 4.14 07/27] Input: pwm-vibra - stop regulator after disabling pwm, not before Sasha Levin
2019-03-11 19:58 ` [PATCH AUTOSEL 4.14 08/27] ARM: OMAP2+: Variable "reg" in function omap4_dsi_mux_pads() could be uninitialized Sasha Levin
2019-03-11 19:58 ` [PATCH AUTOSEL 4.14 09/27] ASoC: dapm: fix out-of-bounds accesses to DAPM lookup tables Sasha Levin
2019-03-11 19:58 ` [PATCH AUTOSEL 4.14 10/27] ASoC: rsnd: fixup rsnd_ssi_master_clk_start() user count check Sasha Levin
2019-03-11 19:58 ` [PATCH AUTOSEL 4.14 11/27] KVM: arm/arm64: Reset the VCPU without preemption and vcpu state loaded Sasha Levin
2019-03-11 19:58 ` [PATCH AUTOSEL 4.14 12/27] ARM: OMAP2+: fix lack of timer interrupts on CPU1 after hotplug Sasha Levin
2019-03-11 19:58 ` [PATCH AUTOSEL 4.14 13/27] Input: cap11xx - switch to using set_brightness_blocking() Sasha Levin
2019-03-11 19:58 ` [PATCH AUTOSEL 4.14 14/27] Input: ps2-gpio - flush TX work when closing port Sasha Levin
2019-03-11 19:58 ` [PATCH AUTOSEL 4.14 15/27] Input: matrix_keypad - use flush_delayed_work() Sasha Levin
2019-03-11 19:58 ` [PATCH AUTOSEL 4.14 16/27] mac80211: Fix Tx aggregation session tear down with ITXQs Sasha Levin
2019-03-11 19:58 ` [PATCH AUTOSEL 4.14 17/27] ipvs: fix dependency on nf_defrag_ipv6 Sasha Levin
2019-03-11 19:58 ` [PATCH AUTOSEL 4.14 18/27] floppy: check_events callback should not return a negative number Sasha Levin
2019-03-11 19:58 ` [PATCH AUTOSEL 4.14 19/27] NFS: Don't use page_file_mapping after removing the page Sasha Levin
2019-03-11 19:58 ` [PATCH AUTOSEL 4.14 20/27] mm/gup: fix gup_pmd_range() for dax Sasha Levin
2019-03-11 19:58 ` [PATCH AUTOSEL 4.14 21/27] Revert "mm: use early_pfn_to_nid in page_ext_init" Sasha Levin
2019-03-11 19:58 ` [PATCH AUTOSEL 4.14 22/27] mm: page_alloc: fix ref bias in page_frag_alloc() for 1-byte allocs Sasha Levin
2019-03-11 19:58 ` [PATCH AUTOSEL 4.14 23/27] net: hns: Fix object reference leaks in hns_dsaf_roce_reset() Sasha Levin
2019-03-11 19:58 ` [PATCH AUTOSEL 4.14 24/27] i2c: cadence: Fix the hold bit setting Sasha Levin
2019-03-11 19:58 ` [PATCH AUTOSEL 4.14 25/27] i2c: bcm2835: Clear current buffer pointers and counts after a transfer Sasha Levin
2019-03-11 19:58 ` [PATCH AUTOSEL 4.14 26/27] auxdisplay: ht16k33: fix potential user-after-free on module unload Sasha Levin
2019-03-11 19:58 ` [PATCH AUTOSEL 4.14 27/27] Input: st-keyscan - fix potential zalloc NULL dereference Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190311195824.139043-1-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=linux-kernel@vger.kernel.org \
--cc=p.zabel@pengutronix.de \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).