[PATCH AUTOSEL 4.14 01/35] HID: logitech: check the return value of create_singlethread_workqueue

[PATCH AUTOSEL 4.14 01/35] HID: logitech: check the return value of create_singlethread_workqueue

[Sasha Levin]

From: Kangjie Lu <kjlu@umn.edu>

[ Upstream commit 6c44b15e1c9076d925d5236ddadf1318b0a25ce2 ]

create_singlethread_workqueue may fail and return NULL. The fix checks if it is
NULL to avoid NULL pointer dereference.  Also, the fix moves the call of
create_singlethread_workqueue earlier to avoid resource-release issues.

Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-logitech-hidpp.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/hid/hid-logitech-hidpp.c b/drivers/hid/hid-logitech-hidpp.c
index 614054af904a..b83d4173fc7f 100644
--- a/drivers/hid/hid-logitech-hidpp.c
+++ b/drivers/hid/hid-logitech-hidpp.c
@@ -1907,6 +1907,13 @@ static int hidpp_ff_init(struct hidpp_device *hidpp, u8 feature_index)
 		kfree(data);
 		return -ENOMEM;
 	}
+	data->wq = create_singlethread_workqueue("hidpp-ff-sendqueue");
+	if (!data->wq) {
+		kfree(data->effect_ids);
+		kfree(data);
+		return -ENOMEM;
+	}
+
 	data->hidpp = hidpp;
 	data->feature_index = feature_index;
 	data->version = version;
@@ -1951,7 +1958,6 @@ static int hidpp_ff_init(struct hidpp_device *hidpp, u8 feature_index)
 	/* ignore boost value at response.fap.params[2] */
 
 	/* init the hardware command queue */
-	data->wq = create_singlethread_workqueue("hidpp-ff-sendqueue");
 	atomic_set(&data->workqueue_size, 0);
 
 	/* initialize with zero autocenter to get wheel in usable state */
-- 
2.19.1

[PATCH AUTOSEL 4.14 02/35] HID: debug: fix race condition with between rdesc_show() and device removal

[Sasha Levin]

From: "He, Bo" <bo.he@intel.com>

[ Upstream commit cef0d4948cb0a02db37ebfdc320e127c77ab1637 ]

There is a race condition that could happen if hid_debug_rdesc_show()
is running while hdev is in the process of going away (device removal,
system suspend, etc) which could result in NULL pointer dereference:

	 BUG: unable to handle kernel paging request at 0000000783316040
	 CPU: 1 PID: 1512 Comm: getevent Tainted: G     U     O 4.19.20-quilt-2e5dc0ac-00029-gc455a447dd55 #1
	 RIP: 0010:hid_dump_device+0x9b/0x160
	 Call Trace:
	  hid_debug_rdesc_show+0x72/0x1d0
	  seq_read+0xe0/0x410
	  full_proxy_read+0x5f/0x90
	  __vfs_read+0x3a/0x170
	  vfs_read+0xa0/0x150
	  ksys_read+0x58/0xc0
	  __x64_sys_read+0x1a/0x20
	  do_syscall_64+0x55/0x110
	  entry_SYSCALL_64_after_hwframe+0x49/0xbe

Grab driver_input_lock to make sure the input device exists throughout the
whole process of dumping the rdesc.

[jkosina@suse.cz: update changelog a bit]
Signed-off-by: "he, bo" <bo.he@intel.com>
Signed-off-by: "Zhang, Jun" <jun.zhang@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-debug.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/hid/hid-debug.c b/drivers/hid/hid-debug.c
index a90967cd4987..a0bcbb633b67 100644
--- a/drivers/hid/hid-debug.c
+++ b/drivers/hid/hid-debug.c
@@ -1060,10 +1060,15 @@ static int hid_debug_rdesc_show(struct seq_file *f, void *p)
 	seq_printf(f, "\n\n");
 
 	/* dump parsed data and input mappings */
+	if (down_interruptible(&hdev->driver_input_lock))
+		return 0;
+
 	hid_dump_device(hdev, f);
 	seq_printf(f, "\n");
 	hid_dump_input_mapping(hdev, f);
 
+	up(&hdev->driver_input_lock);
+
 	return 0;
 }
 
-- 
2.19.1

[PATCH AUTOSEL 4.14 03/35] rtc: sh: Fix invalid alarm warning for non-enabled alarm

[Sasha Levin]

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit 15d82d22498784966df8e4696174a16b02cc1052 ]

When no alarm has been programmed on RSK-RZA1, an error message is
printed during boot:

    rtc rtc0: invalid alarm value: 2019-03-14T255:255:255

sh_rtc_read_alarm_value() returns 0xff when querying a hardware alarm
field that is not enabled.  __rtc_read_alarm() validates the received
alarm values, and fills in missing fields when needed.
While 0xff is handled fine for the year, month, and day fields, and
corrected as considered being out-of-range, this is not the case for the
hour, minute, and second fields, where -1 is expected for missing
fields.

Fix this by returning -1 instead, as this value is handled fine for all
fields.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/rtc/rtc-sh.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/rtc/rtc-sh.c b/drivers/rtc/rtc-sh.c
index 6c2d3989f967..9b6a927149a4 100644
--- a/drivers/rtc/rtc-sh.c
+++ b/drivers/rtc/rtc-sh.c
@@ -462,7 +462,7 @@ static int sh_rtc_set_time(struct device *dev, struct rtc_time *tm)
 static inline int sh_rtc_read_alarm_value(struct sh_rtc *rtc, int reg_off)
 {
 	unsigned int byte;
-	int value = 0xff;	/* return 0xff for ignored values */
+	int value = -1;			/* return -1 for ignored values */
 
 	byte = readb(rtc->regbase + reg_off);
 	if (byte & AR_ENB) {
-- 
2.19.1

[PATCH AUTOSEL 4.14 04/35] batman-adv: Reduce claim hash refcnt only for removed entry

[Sasha Levin]

From: Sven Eckelmann <sven@narfation.org>

[ Upstream commit 4ba104f468bbfc27362c393815d03aa18fb7a20f ]

The batadv_hash_remove is a function which searches the hashtable for an
entry using a needle, a hashtable bucket selection function and a compare
function. It will lock the bucket list and delete an entry when the compare
function matches it with the needle. It returns the pointer to the
hlist_node which matches or NULL when no entry matches the needle.

The batadv_bla_del_claim is not itself protected in anyway to avoid that
any other function is modifying the hashtable between the search for the
entry and the call to batadv_hash_remove. It can therefore happen that the
entry either doesn't exist anymore or an entry was deleted which is not the
same object as the needle. In such an situation, the reference counter (for
the reference stored in the hashtable) must not be reduced for the needle.
Instead the reference counter of the actually removed entry has to be
reduced.

Otherwise the reference counter will underflow and the object might be
freed before all its references were dropped. The kref helpers reported
this problem as:

  refcount_t: underflow; use-after-free.

Fixes: 23721387c409 ("batman-adv: add basic bridge loop avoidance code")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/batman-adv/bridge_loop_avoidance.c | 16 +++++++++++++---
 1 file changed, 13 insertions(+), 3 deletions(-)

diff --git a/net/batman-adv/bridge_loop_avoidance.c b/net/batman-adv/bridge_loop_avoidance.c
index c3c848f64fdd..c761c0c233e4 100644
--- a/net/batman-adv/bridge_loop_avoidance.c
+++ b/net/batman-adv/bridge_loop_avoidance.c
@@ -803,6 +803,8 @@ static void batadv_bla_del_claim(struct batadv_priv *bat_priv,
 				 const u8 *mac, const unsigned short vid)
 {
 	struct batadv_bla_claim search_claim, *claim;
+	struct batadv_bla_claim *claim_removed_entry;
+	struct hlist_node *claim_removed_node;
 
 	ether_addr_copy(search_claim.addr, mac);
 	search_claim.vid = vid;
@@ -813,10 +815,18 @@ static void batadv_bla_del_claim(struct batadv_priv *bat_priv,
 	batadv_dbg(BATADV_DBG_BLA, bat_priv, "%s(): %pM, vid %d\n", __func__,
 		   mac, batadv_print_vid(vid));
 
-	batadv_hash_remove(bat_priv->bla.claim_hash, batadv_compare_claim,
-			   batadv_choose_claim, claim);
-	batadv_claim_put(claim); /* reference from the hash is gone */
+	claim_removed_node = batadv_hash_remove(bat_priv->bla.claim_hash,
+						batadv_compare_claim,
+						batadv_choose_claim, claim);
+	if (!claim_removed_node)
+		goto free_claim;
 
+	/* reference from the hash is gone */
+	claim_removed_entry = hlist_entry(claim_removed_node,
+					  struct batadv_bla_claim, hash_entry);
+	batadv_claim_put(claim_removed_entry);
+
+free_claim:
 	/* don't need the reference from hash_find() anymore */
 	batadv_claim_put(claim);
 }
-- 
2.19.1

[PATCH AUTOSEL 4.14 05/35] batman-adv: Reduce tt_local hash refcnt only for removed entry

[Sasha Levin]

From: Sven Eckelmann <sven@narfation.org>

[ Upstream commit 3d65b9accab4a7ed5038f6df403fbd5e298398c7 ]

The batadv_hash_remove is a function which searches the hashtable for an
entry using a needle, a hashtable bucket selection function and a compare
function. It will lock the bucket list and delete an entry when the compare
function matches it with the needle. It returns the pointer to the
hlist_node which matches or NULL when no entry matches the needle.

The batadv_tt_local_remove is not itself protected in anyway to avoid that
any other function is modifying the hashtable between the search for the
entry and the call to batadv_hash_remove. It can therefore happen that the
entry either doesn't exist anymore or an entry was deleted which is not the
same object as the needle. In such an situation, the reference counter (for
the reference stored in the hashtable) must not be reduced for the needle.
Instead the reference counter of the actually removed entry has to be
reduced.

Otherwise the reference counter will underflow and the object might be
freed before all its references were dropped. The kref helpers reported
this problem as:

  refcount_t: underflow; use-after-free.

Fixes: ef72706a0543 ("batman-adv: protect tt_local_entry from concurrent delete events")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/batman-adv/translation-table.c | 14 +++++++++-----
 1 file changed, 9 insertions(+), 5 deletions(-)

diff --git a/net/batman-adv/translation-table.c b/net/batman-adv/translation-table.c
index 9da3455847ff..6c3e446abeed 100644
--- a/net/batman-adv/translation-table.c
+++ b/net/batman-adv/translation-table.c
@@ -1313,9 +1313,10 @@ u16 batadv_tt_local_remove(struct batadv_priv *bat_priv, const u8 *addr,
 			   unsigned short vid, const char *message,
 			   bool roaming)
 {
+	struct batadv_tt_local_entry *tt_removed_entry;
 	struct batadv_tt_local_entry *tt_local_entry;
 	u16 flags, curr_flags = BATADV_NO_FLAGS;
-	void *tt_entry_exists;
+	struct hlist_node *tt_removed_node;
 
 	tt_local_entry = batadv_tt_local_hash_find(bat_priv, addr, vid);
 	if (!tt_local_entry)
@@ -1344,15 +1345,18 @@ u16 batadv_tt_local_remove(struct batadv_priv *bat_priv, const u8 *addr,
 	 */
 	batadv_tt_local_event(bat_priv, tt_local_entry, BATADV_TT_CLIENT_DEL);
 
-	tt_entry_exists = batadv_hash_remove(bat_priv->tt.local_hash,
+	tt_removed_node = batadv_hash_remove(bat_priv->tt.local_hash,
 					     batadv_compare_tt,
 					     batadv_choose_tt,
 					     &tt_local_entry->common);
-	if (!tt_entry_exists)
+	if (!tt_removed_node)
 		goto out;
 
-	/* extra call to free the local tt entry */
-	batadv_tt_local_entry_put(tt_local_entry);
+	/* drop reference of remove hash entry */
+	tt_removed_entry = hlist_entry(tt_removed_node,
+				       struct batadv_tt_local_entry,
+				       common.hash_entry);
+	batadv_tt_local_entry_put(tt_removed_entry);
 
 out:
 	if (tt_local_entry)
-- 
2.19.1

[PATCH AUTOSEL 4.14 06/35] batman-adv: Reduce tt_global hash refcnt only for removed entry

[Sasha Levin]

From: Sven Eckelmann <sven@narfation.org>

[ Upstream commit f131a56880d10932931e74773fb8702894a94a75 ]

The batadv_hash_remove is a function which searches the hashtable for an
entry using a needle, a hashtable bucket selection function and a compare
function. It will lock the bucket list and delete an entry when the compare
function matches it with the needle. It returns the pointer to the
hlist_node which matches or NULL when no entry matches the needle.

The batadv_tt_global_free is not itself protected in anyway to avoid that
any other function is modifying the hashtable between the search for the
entry and the call to batadv_hash_remove. It can therefore happen that the
entry either doesn't exist anymore or an entry was deleted which is not the
same object as the needle. In such an situation, the reference counter (for
the reference stored in the hashtable) must not be reduced for the needle.
Instead the reference counter of the actually removed entry has to be
reduced.

Otherwise the reference counter will underflow and the object might be
freed before all its references were dropped. The kref helpers reported
this problem as:

  refcount_t: underflow; use-after-free.

Fixes: 7683fdc1e886 ("batman-adv: protect the local and the global trans-tables with rcu")
Reported-by: Martin Weinelt <martin@linuxlounge.net>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Acked-by: Antonio Quartulli <a@unstable.cc>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/batman-adv/translation-table.c | 18 +++++++++++++++---
 1 file changed, 15 insertions(+), 3 deletions(-)

diff --git a/net/batman-adv/translation-table.c b/net/batman-adv/translation-table.c
index 6c3e446abeed..020a8adc4cce 100644
--- a/net/batman-adv/translation-table.c
+++ b/net/batman-adv/translation-table.c
@@ -614,14 +614,26 @@ static void batadv_tt_global_free(struct batadv_priv *bat_priv,
 				  struct batadv_tt_global_entry *tt_global,
 				  const char *message)
 {
+	struct batadv_tt_global_entry *tt_removed_entry;
+	struct hlist_node *tt_removed_node;
+
 	batadv_dbg(BATADV_DBG_TT, bat_priv,
 		   "Deleting global tt entry %pM (vid: %d): %s\n",
 		   tt_global->common.addr,
 		   batadv_print_vid(tt_global->common.vid), message);
 
-	batadv_hash_remove(bat_priv->tt.global_hash, batadv_compare_tt,
-			   batadv_choose_tt, &tt_global->common);
-	batadv_tt_global_entry_put(tt_global);
+	tt_removed_node = batadv_hash_remove(bat_priv->tt.global_hash,
+					     batadv_compare_tt,
+					     batadv_choose_tt,
+					     &tt_global->common);
+	if (!tt_removed_node)
+		return;
+
+	/* drop reference of remove hash entry */
+	tt_removed_entry = hlist_entry(tt_removed_node,
+				       struct batadv_tt_global_entry,
+				       common.hash_entry);
+	batadv_tt_global_entry_put(tt_removed_entry);
 }
 
 /**
-- 
2.19.1

[PATCH AUTOSEL 4.14 07/35] ARM: dts: rockchip: Fix gpu opp node names for rk3288

[Sasha Levin]

From: Douglas Anderson <dianders@chromium.org>

[ Upstream commit d040e4e8deeaa8257d6aa260e29ad69832b5d630 ]

The device tree compiler yells like this:
  Warning (unit_address_vs_reg):
  /gpu-opp-table/opp@100000000:
  node has a unit name, but no reg property

Let's match the cpu opp node names and use a dash.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/rk3288.dtsi | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index f7a951afd281..5a7888581eea 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -1181,27 +1181,27 @@
 	gpu_opp_table: gpu-opp-table {
 		compatible = "operating-points-v2";
 
-		opp@100000000 {
+		opp-100000000 {
 			opp-hz = /bits/ 64 <100000000>;
 			opp-microvolt = <950000>;
 		};
-		opp@200000000 {
+		opp-200000000 {
 			opp-hz = /bits/ 64 <200000000>;
 			opp-microvolt = <950000>;
 		};
-		opp@300000000 {
+		opp-300000000 {
 			opp-hz = /bits/ 64 <300000000>;
 			opp-microvolt = <1000000>;
 		};
-		opp@400000000 {
+		opp-400000000 {
 			opp-hz = /bits/ 64 <400000000>;
 			opp-microvolt = <1100000>;
 		};
-		opp@500000000 {
+		opp-500000000 {
 			opp-hz = /bits/ 64 <500000000>;
 			opp-microvolt = <1200000>;
 		};
-		opp@600000000 {
+		opp-600000000 {
 			opp-hz = /bits/ 64 <600000000>;
 			opp-microvolt = <1250000>;
 		};
-- 
2.19.1

[PATCH AUTOSEL 4.14 08/35] igb: Fix WARN_ONCE on runtime suspend

[Sasha Levin]

From: Arvind Sankar <niveditas98@gmail.com>

[ Upstream commit dabb8338be533c18f50255cf39ff4f66d4dabdbe ]

The runtime_suspend device callbacks are not supposed to save
configuration state or change the power state. Commit fb29f76cc566
("igb: Fix an issue that PME is not enabled during runtime suspend")
changed the driver to not save configuration state during runtime
suspend, however the driver callback still put the device into a
low-power state. This causes a warning in the pci pm core and results in
pci_pm_runtime_suspend not calling pci_save_state or pci_finish_runtime_suspend.

Fix this by not changing the power state either, leaving that to pci pm
core, and make the same change for suspend callback as well.

Also move a couple of defines into the appropriate header file instead
of inline in the .c file.

Fixes: fb29f76cc566 ("igb: Fix an issue that PME is not enabled during runtime suspend")
Signed-off-by: Arvind Sankar <niveditas98@gmail.com>
Reviewed-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/ethernet/intel/igb/e1000_defines.h    |  2 +
 drivers/net/ethernet/intel/igb/igb_main.c     | 57 +++----------------
 2 files changed, 10 insertions(+), 49 deletions(-)

diff --git a/drivers/net/ethernet/intel/igb/e1000_defines.h b/drivers/net/ethernet/intel/igb/e1000_defines.h
index 1de82f247312..d258a75c934b 100644
--- a/drivers/net/ethernet/intel/igb/e1000_defines.h
+++ b/drivers/net/ethernet/intel/igb/e1000_defines.h
@@ -214,6 +214,8 @@
 /* enable link status from external LINK_0 and LINK_1 pins */
 #define E1000_CTRL_SWDPIN0  0x00040000  /* SWDPIN 0 value */
 #define E1000_CTRL_SWDPIN1  0x00080000  /* SWDPIN 1 value */
+#define E1000_CTRL_ADVD3WUC 0x00100000  /* D3 WUC */
+#define E1000_CTRL_EN_PHY_PWR_MGMT 0x00200000 /* PHY PM enable */
 #define E1000_CTRL_SDP0_DIR 0x00400000  /* SDP0 Data direction */
 #define E1000_CTRL_SDP1_DIR 0x00800000  /* SDP1 Data direction */
 #define E1000_CTRL_RST      0x04000000  /* Global reset */
diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index 8892ea5cbb01..71b235f935d9 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -7934,9 +7934,7 @@ static int __igb_shutdown(struct pci_dev *pdev, bool *enable_wake,
 	struct e1000_hw *hw = &adapter->hw;
 	u32 ctrl, rctl, status;
 	u32 wufc = runtime ? E1000_WUFC_LNKC : adapter->wol;
-#ifdef CONFIG_PM
-	int retval = 0;
-#endif
+	bool wake;
 
 	rtnl_lock();
 	netif_device_detach(netdev);
@@ -7949,14 +7947,6 @@ static int __igb_shutdown(struct pci_dev *pdev, bool *enable_wake,
 	igb_clear_interrupt_scheme(adapter);
 	rtnl_unlock();
 
-#ifdef CONFIG_PM
-	if (!runtime) {
-		retval = pci_save_state(pdev);
-		if (retval)
-			return retval;
-	}
-#endif
-
 	status = rd32(E1000_STATUS);
 	if (status & E1000_STATUS_LU)
 		wufc &= ~E1000_WUFC_LNKC;
@@ -7973,10 +7963,6 @@ static int __igb_shutdown(struct pci_dev *pdev, bool *enable_wake,
 		}
 
 		ctrl = rd32(E1000_CTRL);
-		/* advertise wake from D3Cold */
-		#define E1000_CTRL_ADVD3WUC 0x00100000
-		/* phy power management enable */
-		#define E1000_CTRL_EN_PHY_PWR_MGMT 0x00200000
 		ctrl |= E1000_CTRL_ADVD3WUC;
 		wr32(E1000_CTRL, ctrl);
 
@@ -7990,12 +7976,15 @@ static int __igb_shutdown(struct pci_dev *pdev, bool *enable_wake,
 		wr32(E1000_WUFC, 0);
 	}
 
-	*enable_wake = wufc || adapter->en_mng_pt;
-	if (!*enable_wake)
+	wake = wufc || adapter->en_mng_pt;
+	if (!wake)
 		igb_power_down_link(adapter);
 	else
 		igb_power_up_link(adapter);
 
+	if (enable_wake)
+		*enable_wake = wake;
+
 	/* Release control of h/w to f/w.  If f/w is AMT enabled, this
 	 * would have already happened in close and is redundant.
 	 */
@@ -8038,22 +8027,7 @@ static void igb_deliver_wake_packet(struct net_device *netdev)
 
 static int __maybe_unused igb_suspend(struct device *dev)
 {
-	int retval;
-	bool wake;
-	struct pci_dev *pdev = to_pci_dev(dev);
-
-	retval = __igb_shutdown(pdev, &wake, 0);
-	if (retval)
-		return retval;
-
-	if (wake) {
-		pci_prepare_to_sleep(pdev);
-	} else {
-		pci_wake_from_d3(pdev, false);
-		pci_set_power_state(pdev, PCI_D3hot);
-	}
-
-	return 0;
+	return __igb_shutdown(to_pci_dev(dev), NULL, 0);
 }
 
 static int __maybe_unused igb_resume(struct device *dev)
@@ -8124,22 +8098,7 @@ static int __maybe_unused igb_runtime_idle(struct device *dev)
 
 static int __maybe_unused igb_runtime_suspend(struct device *dev)
 {
-	struct pci_dev *pdev = to_pci_dev(dev);
-	int retval;
-	bool wake;
-
-	retval = __igb_shutdown(pdev, &wake, 1);
-	if (retval)
-		return retval;
-
-	if (wake) {
-		pci_prepare_to_sleep(pdev);
-	} else {
-		pci_wake_from_d3(pdev, false);
-		pci_set_power_state(pdev, PCI_D3hot);
-	}
-
-	return 0;
+	return __igb_shutdown(to_pci_dev(dev), NULL, 1);
 }
 
 static int __maybe_unused igb_runtime_resume(struct device *dev)
-- 
2.19.1

[PATCH AUTOSEL 4.14 09/35] fm10k: Fix a potential NULL pointer dereference

[Sasha Levin]

From: Yue Haibing <yuehaibing@huawei.com>

[ Upstream commit 01ca667133d019edc9f0a1f70a272447c84ec41f ]

Syzkaller report this:

kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] SMP KASAN PTI
CPU: 0 PID: 4378 Comm: syz-executor.0 Tainted: G         C        5.0.0+ #5
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
RIP: 0010:__lock_acquire+0x95b/0x3200 kernel/locking/lockdep.c:3573
Code: 00 0f 85 28 1e 00 00 48 81 c4 08 01 00 00 5b 5d 41 5c 41 5d 41 5e 41 5f c3 4c 89 ea 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 <80> 3c 02 00 0f 85 cc 24 00 00 49 81 7d 00 e0 de 03 a6 41 bc 00 00
RSP: 0018:ffff8881e3c07a40 EFLAGS: 00010002
RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000010 RSI: 0000000000000000 RDI: 0000000000000080
RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000
R10: ffff8881e3c07d98 R11: ffff8881c7f21f80 R12: 0000000000000001
R13: 0000000000000080 R14: 0000000000000000 R15: 0000000000000001
FS:  00007fce2252e700(0000) GS:ffff8881f2400000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fffc7eb0228 CR3: 00000001e5bea002 CR4: 00000000007606f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
 lock_acquire+0xff/0x2c0 kernel/locking/lockdep.c:4211
 __mutex_lock_common kernel/locking/mutex.c:925 [inline]
 __mutex_lock+0xdf/0x1050 kernel/locking/mutex.c:1072
 drain_workqueue+0x24/0x3f0 kernel/workqueue.c:2934
 destroy_workqueue+0x23/0x630 kernel/workqueue.c:4319
 __do_sys_delete_module kernel/module.c:1018 [inline]
 __se_sys_delete_module kernel/module.c:961 [inline]
 __x64_sys_delete_module+0x30c/0x480 kernel/module.c:961
 do_syscall_64+0x9f/0x450 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x462e99
Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fce2252dc58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0
RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000020000140
RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007fce2252e6bc
R13: 00000000004bcca9 R14: 00000000006f6b48 R15: 00000000ffffffff

If alloc_workqueue fails, it should return -ENOMEM, otherwise may
trigger this NULL pointer dereference while unloading drivers.

Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: 0a38c17a21a0 ("fm10k: Remove create_workqueue")
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/fm10k/fm10k_main.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_main.c b/drivers/net/ethernet/intel/fm10k/fm10k_main.c
index 103c0a742d03..fef0bff4a54b 100644
--- a/drivers/net/ethernet/intel/fm10k/fm10k_main.c
+++ b/drivers/net/ethernet/intel/fm10k/fm10k_main.c
@@ -58,6 +58,8 @@ static int __init fm10k_init_module(void)
 	/* create driver workqueue */
 	fm10k_workqueue = alloc_workqueue("%s", WQ_MEM_RECLAIM, 0,
 					  fm10k_driver_name);
+	if (!fm10k_workqueue)
+		return -ENOMEM;
 
 	fm10k_dbg_init();
 
-- 
2.19.1

[PATCH AUTOSEL 4.14 10/35] net/mlx5: E-Switch, Fix esw manager vport indication for more vport commands

[Sasha Levin]

From: Omri Kahalon <omrik@mellanox.com>

[ Upstream commit eca4a928585ac08147e5cc8e2111ecbc6279ee31 ]

Traditionally, the PF (Physical Function) which resides on vport 0 was
the E-switch manager. Since the ECPF (Embedded CPU Physical Function),
which resides on vport 0xfffe, was introduced as the E-Switch manager,
the assumption that the E-switch manager is on vport 0 is incorrect.

Since the eswitch code already uses the actual vport value, all we
need is to always set other_vport=1.

Signed-off-by: Omri Kahalon <omrik@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlx5/core/eswitch.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c
index d2914116af8e..090d54275a7d 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c
@@ -79,8 +79,7 @@ static int arm_vport_context_events_cmd(struct mlx5_core_dev *dev, u16 vport,
 		 opcode, MLX5_CMD_OP_MODIFY_NIC_VPORT_CONTEXT);
 	MLX5_SET(modify_nic_vport_context_in, in, field_select.change_event, 1);
 	MLX5_SET(modify_nic_vport_context_in, in, vport_number, vport);
-	if (vport)
-		MLX5_SET(modify_nic_vport_context_in, in, other_vport, 1);
+	MLX5_SET(modify_nic_vport_context_in, in, other_vport, 1);
 	nic_vport_ctx = MLX5_ADDR_OF(modify_nic_vport_context_in,
 				     in, nic_vport_context);
 
@@ -108,8 +107,7 @@ static int modify_esw_vport_context_cmd(struct mlx5_core_dev *dev, u16 vport,
 	MLX5_SET(modify_esw_vport_context_in, in, opcode,
 		 MLX5_CMD_OP_MODIFY_ESW_VPORT_CONTEXT);
 	MLX5_SET(modify_esw_vport_context_in, in, vport_number, vport);
-	if (vport)
-		MLX5_SET(modify_esw_vport_context_in, in, other_vport, 1);
+	MLX5_SET(modify_esw_vport_context_in, in, other_vport, 1);
 	return mlx5_cmd_exec(dev, in, inlen, out, sizeof(out));
 }
 
-- 
2.19.1

[PATCH AUTOSEL 4.14 11/35] bonding: show full hw address in sysfs for slave entries

[Sasha Levin]

From: Konstantin Khorenko <khorenko@virtuozzo.com>

[ Upstream commit 18bebc6dd3281955240062655a4df35eef2c46b3 ]

Bond expects ethernet hwaddr for its slave, but it can be longer than 6
bytes - infiniband interface for example.

 # cat /sys/devices/<skipped>/net/ib0/address
 80:00:02:08:fe:80:00:00:00:00:00:00:7c:fe:90:03:00:be:5d:e1

 # cat /sys/devices/<skipped>/net/ib0/bonding_slave/perm_hwaddr
 80:00:02:08:fe:80

So print full hwaddr in sysfs "bonding_slave/perm_hwaddr" as well.

Signed-off-by: Konstantin Khorenko <khorenko@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/bonding/bond_sysfs_slave.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/bonding/bond_sysfs_slave.c b/drivers/net/bonding/bond_sysfs_slave.c
index 7d16c51e6913..641a532b67cb 100644
--- a/drivers/net/bonding/bond_sysfs_slave.c
+++ b/drivers/net/bonding/bond_sysfs_slave.c
@@ -55,7 +55,9 @@ static SLAVE_ATTR_RO(link_failure_count);
 
 static ssize_t perm_hwaddr_show(struct slave *slave, char *buf)
 {
-	return sprintf(buf, "%pM\n", slave->perm_hwaddr);
+	return sprintf(buf, "%*phC\n",
+		       slave->dev->addr_len,
+		       slave->perm_hwaddr);
 }
 static SLAVE_ATTR_RO(perm_hwaddr);
 
-- 
2.19.1

[PATCH AUTOSEL 4.14 12/35] net: stmmac: ratelimit RX error logs

[Sasha Levin]

From: Aaro Koskinen <aaro.koskinen@nokia.com>

[ Upstream commit 972c9be784e077bc56472c78243e0326e525b689 ]

Ratelimit RX error logs.

Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index f2429ec07b57..80e138c0336d 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -3415,9 +3415,10 @@ static int stmmac_rx(struct stmmac_priv *priv, int limit, u32 queue)
 			 *  ignored
 			 */
 			if (frame_len > priv->dma_buf_sz) {
-				netdev_err(priv->dev,
-					   "len %d larger than size (%d)\n",
-					   frame_len, priv->dma_buf_sz);
+				if (net_ratelimit())
+					netdev_err(priv->dev,
+						   "len %d larger than size (%d)\n",
+						   frame_len, priv->dma_buf_sz);
 				priv->dev->stats.rx_length_errors++;
 				break;
 			}
@@ -3475,9 +3476,10 @@ static int stmmac_rx(struct stmmac_priv *priv, int limit, u32 queue)
 			} else {
 				skb = rx_q->rx_skbuff[entry];
 				if (unlikely(!skb)) {
-					netdev_err(priv->dev,
-						   "%s: Inconsistent Rx chain\n",
-						   priv->dev->name);
+					if (net_ratelimit())
+						netdev_err(priv->dev,
+							   "%s: Inconsistent Rx chain\n",
+							   priv->dev->name);
 					priv->dev->stats.rx_dropped++;
 					break;
 				}
-- 
2.19.1

[PATCH AUTOSEL 4.14 13/35] net: stmmac: don't overwrite discard_frame status

[Sasha Levin]

From: Aaro Koskinen <aaro.koskinen@nokia.com>

[ Upstream commit 1b746ce8b397e58f9e40ce5c63b7198de6930482 ]

If we have error bits set, the discard_frame status will get overwritten
by checksum bit checks, which might set the status back to good one.
Fix by checking the COE status only if the frame is good.

Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/stmicro/stmmac/enh_desc.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/enh_desc.c b/drivers/net/ethernet/stmicro/stmmac/enh_desc.c
index acd65a4f94d4..cdfe9a350ac0 100644
--- a/drivers/net/ethernet/stmicro/stmmac/enh_desc.c
+++ b/drivers/net/ethernet/stmicro/stmmac/enh_desc.c
@@ -231,9 +231,10 @@ static int enh_desc_get_rx_status(void *data, struct stmmac_extra_stats *x,
 	 * It doesn't match with the information reported into the databook.
 	 * At any rate, we need to understand if the CSUM hw computation is ok
 	 * and report this info to the upper layers. */
-	ret = enh_desc_coe_rdes0(!!(rdes0 & RDES0_IPC_CSUM_ERROR),
-				 !!(rdes0 & RDES0_FRAME_TYPE),
-				 !!(rdes0 & ERDES0_RX_MAC_ADDR));
+	if (likely(ret == good_frame))
+		ret = enh_desc_coe_rdes0(!!(rdes0 & RDES0_IPC_CSUM_ERROR),
+					 !!(rdes0 & RDES0_FRAME_TYPE),
+					 !!(rdes0 & ERDES0_RX_MAC_ADDR));
 
 	if (unlikely(rdes0 & RDES0_DRIBBLING))
 		x->dribbling_bit++;
-- 
2.19.1

[PATCH AUTOSEL 4.14 14/35] net: stmmac: fix dropping of multi-descriptor RX frames

[Sasha Levin]

From: Aaro Koskinen <aaro.koskinen@nokia.com>

[ Upstream commit 8ac0c24fe1c256af6644caf3d311029440ec2fbd ]

Packets without the last descriptor set should be dropped early. If we
receive a frame larger than the DMA buffer, the HW will continue using the
next descriptor. Driver mistakes these as individual frames, and sometimes
a truncated frame (without the LD set) may look like a valid packet.

This fixes a strange issue where the system replies to 4098-byte ping
although the MTU/DMA buffer size is set to 4096, and yet at the same
time it's logging an oversized packet.

Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/stmicro/stmmac/enh_desc.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/net/ethernet/stmicro/stmmac/enh_desc.c b/drivers/net/ethernet/stmicro/stmmac/enh_desc.c
index cdfe9a350ac0..f2150efddc88 100644
--- a/drivers/net/ethernet/stmicro/stmmac/enh_desc.c
+++ b/drivers/net/ethernet/stmicro/stmmac/enh_desc.c
@@ -201,6 +201,11 @@ static int enh_desc_get_rx_status(void *data, struct stmmac_extra_stats *x,
 	if (unlikely(rdes0 & RDES0_OWN))
 		return dma_own;
 
+	if (unlikely(!(rdes0 & RDES0_LAST_DESCRIPTOR))) {
+		stats->rx_length_errors++;
+		return discard_frame;
+	}
+
 	if (unlikely(rdes0 & RDES0_ERROR_SUMMARY)) {
 		if (unlikely(rdes0 & RDES0_DESCRIPTOR_ERROR)) {
 			x->rx_desc++;
-- 
2.19.1

[PATCH AUTOSEL 4.14 15/35] net: stmmac: don't log oversized frames

[Sasha Levin]

From: Aaro Koskinen <aaro.koskinen@nokia.com>

[ Upstream commit 057a0c5642a2ff2db7c421cdcde34294a23bf37b ]

This is log is harmful as it can trigger multiple times per packet. Delete
it.

Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/stmicro/stmmac/norm_desc.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/norm_desc.c b/drivers/net/ethernet/stmicro/stmmac/norm_desc.c
index db4cee57bb24..66c17bab5997 100644
--- a/drivers/net/ethernet/stmicro/stmmac/norm_desc.c
+++ b/drivers/net/ethernet/stmicro/stmmac/norm_desc.c
@@ -91,8 +91,6 @@ static int ndesc_get_rx_status(void *data, struct stmmac_extra_stats *x,
 		return dma_own;
 
 	if (unlikely(!(rdes0 & RDES0_LAST_DESCRIPTOR))) {
-		pr_warn("%s: Oversized frame spanned multiple buffers\n",
-			__func__);
 		stats->rx_length_errors++;
 		return discard_frame;
 	}
-- 
2.19.1

[PATCH AUTOSEL 4.14 16/35] jffs2: fix use-after-free on symlink traversal

[Sasha Levin]

From: Al Viro <viro@zeniv.linux.org.uk>

[ Upstream commit 4fdcfab5b5537c21891e22e65996d4d0dd8ab4ca ]

free the symlink body after the same RCU delay we have for freeing the
struct inode itself, so that traversal during RCU pathwalk wouldn't step
into freed memory.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/jffs2/readinode.c | 5 -----
 fs/jffs2/super.c     | 5 ++++-
 2 files changed, 4 insertions(+), 6 deletions(-)

diff --git a/fs/jffs2/readinode.c b/fs/jffs2/readinode.c
index 389ea53ea487..bccfc40b3a74 100644
--- a/fs/jffs2/readinode.c
+++ b/fs/jffs2/readinode.c
@@ -1414,11 +1414,6 @@ void jffs2_do_clear_inode(struct jffs2_sb_info *c, struct jffs2_inode_info *f)
 
 	jffs2_kill_fragtree(&f->fragtree, deleted?c:NULL);
 
-	if (f->target) {
-		kfree(f->target);
-		f->target = NULL;
-	}
-
 	fds = f->dents;
 	while(fds) {
 		fd = fds;
diff --git a/fs/jffs2/super.c b/fs/jffs2/super.c
index 83340496645b..9a9f30eddbbb 100644
--- a/fs/jffs2/super.c
+++ b/fs/jffs2/super.c
@@ -47,7 +47,10 @@ static struct inode *jffs2_alloc_inode(struct super_block *sb)
 static void jffs2_i_callback(struct rcu_head *head)
 {
 	struct inode *inode = container_of(head, struct inode, i_rcu);
-	kmem_cache_free(jffs2_inode_cachep, JFFS2_INODE_INFO(inode));
+	struct jffs2_inode_info *f = JFFS2_INODE_INFO(inode);
+
+	kfree(f->target);
+	kmem_cache_free(jffs2_inode_cachep, f);
 }
 
 static void jffs2_destroy_inode(struct inode *inode)
-- 
2.19.1

[PATCH AUTOSEL 4.14 17/35] debugfs: fix use-after-free on symlink traversal

[Sasha Levin]

From: Al Viro <viro@zeniv.linux.org.uk>

[ Upstream commit 93b919da64c15b90953f96a536e5e61df896ca57 ]

symlink body shouldn't be freed without an RCU delay.  Switch debugfs to
->destroy_inode() and use of call_rcu(); free both the inode and symlink
body in the callback.  Similar to solution for bpf, only here it's even
more obvious that ->evict_inode() can be dropped.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/debugfs/inode.c | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

diff --git a/fs/debugfs/inode.c b/fs/debugfs/inode.c
index ccfe1e1cb6bc..f4df6feec271 100644
--- a/fs/debugfs/inode.c
+++ b/fs/debugfs/inode.c
@@ -170,19 +170,24 @@ static int debugfs_show_options(struct seq_file *m, struct dentry *root)
 	return 0;
 }
 
-static void debugfs_evict_inode(struct inode *inode)
+static void debugfs_i_callback(struct rcu_head *head)
 {
-	truncate_inode_pages_final(&inode->i_data);
-	clear_inode(inode);
+	struct inode *inode = container_of(head, struct inode, i_rcu);
 	if (S_ISLNK(inode->i_mode))
 		kfree(inode->i_link);
+	free_inode_nonrcu(inode);
+}
+
+static void debugfs_destroy_inode(struct inode *inode)
+{
+	call_rcu(&inode->i_rcu, debugfs_i_callback);
 }
 
 static const struct super_operations debugfs_super_operations = {
 	.statfs		= simple_statfs,
 	.remount_fs	= debugfs_remount,
 	.show_options	= debugfs_show_options,
-	.evict_inode	= debugfs_evict_inode,
+	.destroy_inode	= debugfs_destroy_inode,
 };
 
 static struct vfsmount *debugfs_automount(struct path *path)
-- 
2.19.1

[PATCH AUTOSEL 4.14 18/35] rtc: da9063: set uie_unsupported when relevant

[Sasha Levin]

From: Alexandre Belloni <alexandre.belloni@bootlin.com>

[ Upstream commit 882c5e552ffd06856de42261460f46e18319d259 ]

The DA9063AD doesn't support alarms on any seconds and its granularity is
the minute. Set uie_unsupported in that case.

Reported-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Steve Twiss <stwiss.opensource@diasemi.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/rtc/rtc-da9063.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/rtc/rtc-da9063.c b/drivers/rtc/rtc-da9063.c
index f85cae240f12..7e92e491c2e7 100644
--- a/drivers/rtc/rtc-da9063.c
+++ b/drivers/rtc/rtc-da9063.c
@@ -480,6 +480,13 @@ static int da9063_rtc_probe(struct platform_device *pdev)
 	da9063_data_to_tm(data, &rtc->alarm_time, rtc);
 	rtc->rtc_sync = false;
 
+	/*
+	 * TODO: some models have alarms on a minute boundary but still support
+	 * real hardware interrupts. Add this once the core supports it.
+	 */
+	if (config->rtc_data_start != RTC_SEC)
+		rtc->rtc_dev->uie_unsupported = 1;
+
 	irq_alarm = platform_get_irq_byname(pdev, "ALARM");
 	ret = devm_request_threaded_irq(&pdev->dev, irq_alarm, NULL,
 					da9063_alarm_event,
-- 
2.19.1

[PATCH AUTOSEL 4.14 19/35] HID: input: add mapping for Assistant key

[Sasha Levin]

From: Dmitry Torokhov <dmitry.torokhov@gmail.com>

[ Upstream commit ce856634af8cda3490947df8ac1ef5843e6356af ]

According to HUTRR89 usage 0x1cb from the consumer page was assigned to
allow launching desktop-aware assistant application, so let's add the
mapping.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-input.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/hid/hid-input.c b/drivers/hid/hid-input.c
index d146a9b545ee..1aa7d268686b 100644
--- a/drivers/hid/hid-input.c
+++ b/drivers/hid/hid-input.c
@@ -973,6 +973,7 @@ static void hidinput_configure_usage(struct hid_input *hidinput, struct hid_fiel
 		case 0x1b8: map_key_clear(KEY_VIDEO);		break;
 		case 0x1bc: map_key_clear(KEY_MESSENGER);	break;
 		case 0x1bd: map_key_clear(KEY_INFO);		break;
+		case 0x1cb: map_key_clear(KEY_ASSISTANT);	break;
 		case 0x201: map_key_clear(KEY_NEW);		break;
 		case 0x202: map_key_clear(KEY_OPEN);		break;
 		case 0x203: map_key_clear(KEY_CLOSE);		break;
-- 
2.19.1

[PATCH AUTOSEL 4.14 20/35] vfio/pci: use correct format characters

[Sasha Levin]

From: Louis Taylor <louis@kragniz.eu>

[ Upstream commit 426b046b748d1f47e096e05bdcc6fb4172791307 ]

When compiling with -Wformat, clang emits the following warnings:

drivers/vfio/pci/vfio_pci.c:1601:5: warning: format specifies type
      'unsigned short' but the argument has type 'unsigned int' [-Wformat]
                                vendor, device, subvendor, subdevice,
                                ^~~~~~

drivers/vfio/pci/vfio_pci.c:1601:13: warning: format specifies type
      'unsigned short' but the argument has type 'unsigned int' [-Wformat]
                                vendor, device, subvendor, subdevice,
                                        ^~~~~~

drivers/vfio/pci/vfio_pci.c:1601:21: warning: format specifies type
      'unsigned short' but the argument has type 'unsigned int' [-Wformat]
                                vendor, device, subvendor, subdevice,
                                                ^~~~~~~~~

drivers/vfio/pci/vfio_pci.c:1601:32: warning: format specifies type
      'unsigned short' but the argument has type 'unsigned int' [-Wformat]
                                vendor, device, subvendor, subdevice,
                                                           ^~~~~~~~~

drivers/vfio/pci/vfio_pci.c:1605:5: warning: format specifies type
      'unsigned short' but the argument has type 'unsigned int' [-Wformat]
                                vendor, device, subvendor, subdevice,
                                ^~~~~~

drivers/vfio/pci/vfio_pci.c:1605:13: warning: format specifies type
      'unsigned short' but the argument has type 'unsigned int' [-Wformat]
                                vendor, device, subvendor, subdevice,
                                        ^~~~~~

drivers/vfio/pci/vfio_pci.c:1605:21: warning: format specifies type
      'unsigned short' but the argument has type 'unsigned int' [-Wformat]
                                vendor, device, subvendor, subdevice,
                                                ^~~~~~~~~

drivers/vfio/pci/vfio_pci.c:1605:32: warning: format specifies type
      'unsigned short' but the argument has type 'unsigned int' [-Wformat]
                                vendor, device, subvendor, subdevice,
                                                           ^~~~~~~~~
The types of these arguments are unconditionally defined, so this patch
updates the format character to the correct ones for unsigned ints.

Link: https://github.com/ClangBuiltLinux/linux/issues/378
Signed-off-by: Louis Taylor <louis@kragniz.eu>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/vfio/pci/vfio_pci.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/vfio/pci/vfio_pci.c b/drivers/vfio/pci/vfio_pci.c
index 695b9d1a1aae..6f5cc67e343e 100644
--- a/drivers/vfio/pci/vfio_pci.c
+++ b/drivers/vfio/pci/vfio_pci.c
@@ -1443,11 +1443,11 @@ static void __init vfio_pci_fill_ids(void)
 		rc = pci_add_dynid(&vfio_pci_driver, vendor, device,
 				   subvendor, subdevice, class, class_mask, 0);
 		if (rc)
-			pr_warn("failed to add dynamic id [%04hx:%04hx[%04hx:%04hx]] class %#08x/%08x (%d)\n",
+			pr_warn("failed to add dynamic id [%04x:%04x[%04x:%04x]] class %#08x/%08x (%d)\n",
 				vendor, device, subvendor, subdevice,
 				class, class_mask, rc);
 		else
-			pr_info("add [%04hx:%04hx[%04hx:%04hx]] class %#08x/%08x\n",
+			pr_info("add [%04x:%04x[%04x:%04x]] class %#08x/%08x\n",
 				vendor, device, subvendor, subdevice,
 				class, class_mask);
 	}
-- 
2.19.1

[PATCH AUTOSEL 4.14 21/35] vfio/type1: Limit DMA mappings per container

[Sasha Levin]

From: Alex Williamson <alex.williamson@redhat.com>

[ Upstream commit 492855939bdb59c6f947b0b5b44af9ad82b7e38c ]

Memory backed DMA mappings are accounted against a user's locked
memory limit, including multiple mappings of the same memory.  This
accounting bounds the number of such mappings that a user can create.
However, DMA mappings that are not backed by memory, such as DMA
mappings of device MMIO via mmaps, do not make use of page pinning
and therefore do not count against the user's locked memory limit.
These mappings still consume memory, but the memory is not well
associated to the process for the purpose of oom killing a task.

To add bounding on this use case, we introduce a limit to the total
number of concurrent DMA mappings that a user is allowed to create.
This limit is exposed as a tunable module option where the default
value of 64K is expected to be well in excess of any reasonable use
case (a large virtual machine configuration would typically only make
use of tens of concurrent mappings).

This fixes CVE-2019-3882.

Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/vfio/vfio_iommu_type1.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/drivers/vfio/vfio_iommu_type1.c b/drivers/vfio/vfio_iommu_type1.c
index 50eeb74ddc0a..f77a9b3370b5 100644
--- a/drivers/vfio/vfio_iommu_type1.c
+++ b/drivers/vfio/vfio_iommu_type1.c
@@ -58,12 +58,18 @@ module_param_named(disable_hugepages,
 MODULE_PARM_DESC(disable_hugepages,
 		 "Disable VFIO IOMMU support for IOMMU hugepages.");
 
+static unsigned int dma_entry_limit __read_mostly = U16_MAX;
+module_param_named(dma_entry_limit, dma_entry_limit, uint, 0644);
+MODULE_PARM_DESC(dma_entry_limit,
+		 "Maximum number of user DMA mappings per container (65535).");
+
 struct vfio_iommu {
 	struct list_head	domain_list;
 	struct vfio_domain	*external_domain; /* domain for external user */
 	struct mutex		lock;
 	struct rb_root		dma_list;
 	struct blocking_notifier_head notifier;
+	unsigned int		dma_avail;
 	bool			v2;
 	bool			nesting;
 };
@@ -732,6 +738,7 @@ static void vfio_remove_dma(struct vfio_iommu *iommu, struct vfio_dma *dma)
 	vfio_unlink_dma(iommu, dma);
 	put_task_struct(dma->task);
 	kfree(dma);
+	iommu->dma_avail++;
 }
 
 static unsigned long vfio_pgsize_bitmap(struct vfio_iommu *iommu)
@@ -1003,12 +1010,18 @@ static int vfio_dma_do_map(struct vfio_iommu *iommu,
 		goto out_unlock;
 	}
 
+	if (!iommu->dma_avail) {
+		ret = -ENOSPC;
+		goto out_unlock;
+	}
+
 	dma = kzalloc(sizeof(*dma), GFP_KERNEL);
 	if (!dma) {
 		ret = -ENOMEM;
 		goto out_unlock;
 	}
 
+	iommu->dma_avail--;
 	dma->iova = iova;
 	dma->vaddr = vaddr;
 	dma->prot = prot;
@@ -1504,6 +1517,7 @@ static void *vfio_iommu_type1_open(unsigned long arg)
 
 	INIT_LIST_HEAD(&iommu->domain_list);
 	iommu->dma_list = RB_ROOT;
+	iommu->dma_avail = dma_entry_limit;
 	mutex_init(&iommu->lock);
 	BLOCKING_INIT_NOTIFIER_HEAD(&iommu->notifier);
 
-- 
2.19.1

[PATCH AUTOSEL 4.14 22/35] scsi: core: add new RDAC LENOVO/DE_Series device

[Sasha Levin]

From: Xose Vazquez Perez <xose.vazquez@gmail.com>

[ Upstream commit 1cb1d2c64e812928fe0a40b8f7e74523d0283dbe ]

Blacklist "Universal Xport" LUN. It's used for in-band storage array
management.  Also add model to the rdac dh family.

Cc: Martin Wilck <mwilck@suse.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: NetApp RDAC team <ng-eseries-upstream-maintainers@netapp.com>
Cc: Christophe Varoqui <christophe.varoqui@opensvc.com>
Cc: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: SCSI ML <linux-scsi@vger.kernel.org>
Cc: DM ML <dm-devel@redhat.com>
Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com>
Reviewed-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/scsi_devinfo.c | 1 +
 drivers/scsi/scsi_dh.c      | 1 +
 2 files changed, 2 insertions(+)

diff --git a/drivers/scsi/scsi_devinfo.c b/drivers/scsi/scsi_devinfo.c
index 6b594bc7d94a..022fcd2e4702 100644
--- a/drivers/scsi/scsi_devinfo.c
+++ b/drivers/scsi/scsi_devinfo.c
@@ -248,6 +248,7 @@ static struct {
 	{"NETAPP", "Universal Xport", "*", BLIST_NO_ULD_ATTACH},
 	{"LSI", "Universal Xport", "*", BLIST_NO_ULD_ATTACH},
 	{"ENGENIO", "Universal Xport", "*", BLIST_NO_ULD_ATTACH},
+	{"LENOVO", "Universal Xport", "*", BLIST_NO_ULD_ATTACH},
 	{"SMSC", "USB 2 HS-CF", NULL, BLIST_SPARSELUN | BLIST_INQUIRY_36},
 	{"SONY", "CD-ROM CDU-8001", NULL, BLIST_BORKEN},
 	{"SONY", "TSL", NULL, BLIST_FORCELUN},		/* DDS3 & DDS4 autoloaders */
diff --git a/drivers/scsi/scsi_dh.c b/drivers/scsi/scsi_dh.c
index 375cede0c534..c9bc6f058424 100644
--- a/drivers/scsi/scsi_dh.c
+++ b/drivers/scsi/scsi_dh.c
@@ -75,6 +75,7 @@ static const struct scsi_dh_blist scsi_dh_blist[] = {
 	{"NETAPP", "INF-01-00",		"rdac", },
 	{"LSI", "INF-01-00",		"rdac", },
 	{"ENGENIO", "INF-01-00",	"rdac", },
+	{"LENOVO", "DE_Series",		"rdac", },
 	{NULL, NULL,			NULL },
 };
 
-- 
2.19.1

[PATCH AUTOSEL 4.14 23/35] scsi: storvsc: Fix calculation of sub-channel count

[Sasha Levin]

From: Michael Kelley <mikelley@microsoft.com>

[ Upstream commit 382e06d11e075a40b4094b6ef809f8d4bcc7ab2a ]

When the number of sub-channels offered by Hyper-V is >= the number of CPUs
in the VM, calculate the correct number of sub-channels.  The current code
produces one too many.

This scenario arises only when the number of CPUs is artificially
restricted (for example, with maxcpus=<n> on the kernel boot line), because
Hyper-V normally offers a sub-channel count < number of CPUs.  While the
current code doesn't break, the extra sub-channel is unbalanced across the
CPUs (for example, a total of 5 channels on a VM with 4 CPUs).

Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Long Li <longli@microsoft.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/storvsc_drv.c | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/storvsc_drv.c b/drivers/scsi/storvsc_drv.c
index beb585ddc07d..5adeb1e4b186 100644
--- a/drivers/scsi/storvsc_drv.c
+++ b/drivers/scsi/storvsc_drv.c
@@ -658,13 +658,22 @@ static void handle_sc_creation(struct vmbus_channel *new_sc)
 static void  handle_multichannel_storage(struct hv_device *device, int max_chns)
 {
 	struct storvsc_device *stor_device;
-	int num_cpus = num_online_cpus();
 	int num_sc;
 	struct storvsc_cmd_request *request;
 	struct vstor_packet *vstor_packet;
 	int ret, t;
 
-	num_sc = ((max_chns > num_cpus) ? num_cpus : max_chns);
+	/*
+	 * If the number of CPUs is artificially restricted, such as
+	 * with maxcpus=1 on the kernel boot line, Hyper-V could offer
+	 * sub-channels >= the number of CPUs. These sub-channels
+	 * should not be created. The primary channel is already created
+	 * and assigned to one CPU, so check against # CPUs - 1.
+	 */
+	num_sc = min((int)(num_online_cpus() - 1), max_chns);
+	if (!num_sc)
+		return;
+
 	stor_device = get_out_stor_device(device);
 	if (!stor_device)
 		return;
-- 
2.19.1

[PATCH AUTOSEL 4.14 24/35] net: hns: fix KASAN: use-after-free in hns_nic_net_xmit_hw()

[Sasha Levin]

From: Liubin Shu <shuliubin@huawei.com>

[ Upstream commit 3a39a12ad364a9acd1038ba8da67cd8430f30de4 ]

This patch is trying to fix the issue due to:
[27237.844750] BUG: KASAN: use-after-free in hns_nic_net_xmit_hw+0x708/0xa18[hns_enet_drv]

After hnae_queue_xmit() in hns_nic_net_xmit_hw(), can be
interrupted by interruptions, and than call hns_nic_tx_poll_one()
to handle the new packets, and free the skb. So, when turn back to
hns_nic_net_xmit_hw(), calling skb->len will cause use-after-free.

This patch update tx ring statistics in hns_nic_tx_poll_one() to
fix the bug.

Signed-off-by: Liubin Shu <shuliubin@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/hisilicon/hns/hns_enet.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns/hns_enet.c b/drivers/net/ethernet/hisilicon/hns/hns_enet.c
index d30c28fba249..15739eae3da1 100644
--- a/drivers/net/ethernet/hisilicon/hns/hns_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns/hns_enet.c
@@ -376,8 +376,6 @@ netdev_tx_t hns_nic_net_xmit_hw(struct net_device *ndev,
 	wmb(); /* commit all data before submit */
 	assert(skb->queue_mapping < priv->ae_handle->q_num);
 	hnae_queue_xmit(priv->ae_handle->qs[skb->queue_mapping], buf_num);
-	ring->stats.tx_pkts++;
-	ring->stats.tx_bytes += skb->len;
 
 	return NETDEV_TX_OK;
 
@@ -1099,6 +1097,9 @@ static int hns_nic_tx_poll_one(struct hns_nic_ring_data *ring_data,
 		/* issue prefetch for next Tx descriptor */
 		prefetch(&ring->desc_cb[ring->next_to_clean]);
 	}
+	/* update tx ring statistics. */
+	ring->stats.tx_pkts += pkts;
+	ring->stats.tx_bytes += bytes;
 
 	NETIF_TX_UNLOCK(ring);
 
-- 
2.19.1

[PATCH AUTOSEL 4.14 25/35] net: hns: Use NAPI_POLL_WEIGHT for hns driver

[Sasha Levin]

From: Yonglong Liu <liuyonglong@huawei.com>

[ Upstream commit acb1ce15a61154aa501891d67ebf79bc9ea26818 ]

When the HNS driver loaded, always have an error print:
"netif_napi_add() called with weight 256"

This is because the kernel checks the NAPI polling weights
requested by drivers and it prints an error message if a driver
requests a weight bigger than 64.

So use NAPI_POLL_WEIGHT to fix it.

Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/hisilicon/hns/hns_enet.c | 7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns/hns_enet.c b/drivers/net/ethernet/hisilicon/hns/hns_enet.c
index 15739eae3da1..8fd040817804 100644
--- a/drivers/net/ethernet/hisilicon/hns/hns_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns/hns_enet.c
@@ -29,9 +29,6 @@
 
 #define SERVICE_TIMER_HZ (1 * HZ)
 
-#define NIC_TX_CLEAN_MAX_NUM 256
-#define NIC_RX_CLEAN_MAX_NUM 64
-
 #define RCB_IRQ_NOT_INITED 0
 #define RCB_IRQ_INITED 1
 #define HNS_BUFFER_SIZE_2048 2048
@@ -2270,7 +2267,7 @@ static int hns_nic_init_ring_data(struct hns_nic_priv *priv)
 			hns_nic_tx_fini_pro_v2;
 
 		netif_napi_add(priv->netdev, &rd->napi,
-			       hns_nic_common_poll, NIC_TX_CLEAN_MAX_NUM);
+			       hns_nic_common_poll, NAPI_POLL_WEIGHT);
 		rd->ring->irq_init_flag = RCB_IRQ_NOT_INITED;
 	}
 	for (i = h->q_num; i < h->q_num * 2; i++) {
@@ -2283,7 +2280,7 @@ static int hns_nic_init_ring_data(struct hns_nic_priv *priv)
 			hns_nic_rx_fini_pro_v2;
 
 		netif_napi_add(priv->netdev, &rd->napi,
-			       hns_nic_common_poll, NIC_RX_CLEAN_MAX_NUM);
+			       hns_nic_common_poll, NAPI_POLL_WEIGHT);
 		rd->ring->irq_init_flag = RCB_IRQ_NOT_INITED;
 	}
 
-- 
2.19.1

[PATCH AUTOSEL 4.14 26/35] net: hns: Fix probabilistic memory overwrite when HNS driver initialized

[Sasha Levin]

From: Yonglong Liu <liuyonglong@huawei.com>

[ Upstream commit c0b0984426814f3a9251873b689e67d34d8ccd84 ]

When reboot the system again and again, may cause a memory
overwrite.

[   15.638922] systemd[1]: Reached target Swap.
[   15.667561] tun: Universal TUN/TAP device driver, 1.6
[   15.676756] Bridge firewalling registered
[   17.344135] Unable to handle kernel paging request at virtual address 0000000200000040
[   17.352179] Mem abort info:
[   17.355007]   ESR = 0x96000004
[   17.358105]   Exception class = DABT (current EL), IL = 32 bits
[   17.364112]   SET = 0, FnV = 0
[   17.367209]   EA = 0, S1PTW = 0
[   17.370393] Data abort info:
[   17.373315]   ISV = 0, ISS = 0x00000004
[   17.377206]   CM = 0, WnR = 0
[   17.380214] user pgtable: 4k pages, 48-bit VAs, pgdp = (____ptrval____)
[   17.386926] [0000000200000040] pgd=0000000000000000
[   17.391878] Internal error: Oops: 96000004 [#1] SMP
[   17.396824] CPU: 23 PID: 95 Comm: kworker/u130:0 Tainted: G            E     4.19.25-1.2.78.aarch64 #1
[   17.414175] Hardware name: Huawei TaiShan 2280 /BC11SPCD, BIOS 1.54 08/16/2018
[   17.425615] Workqueue: events_unbound async_run_entry_fn
[   17.435151] pstate: 00000005 (nzcv daif -PAN -UAO)
[   17.444139] pc : __mutex_lock.isra.1+0x74/0x540
[   17.453002] lr : __mutex_lock.isra.1+0x3c/0x540
[   17.461701] sp : ffff000100d9bb60
[   17.469146] x29: ffff000100d9bb60 x28: 0000000000000000
[   17.478547] x27: 0000000000000000 x26: ffff802fb8945000
[   17.488063] x25: 0000000000000000 x24: ffff802fa32081a8
[   17.497381] x23: 0000000000000002 x22: ffff801fa2b15220
[   17.506701] x21: ffff000009809000 x20: ffff802fa23a0888
[   17.515980] x19: ffff801fa2b15220 x18: 0000000000000000
[   17.525272] x17: 0000000200000000 x16: 0000000200000000
[   17.534511] x15: 0000000000000000 x14: 0000000000000000
[   17.543652] x13: ffff000008d95db8 x12: 000000000000000d
[   17.552780] x11: ffff000008d95d90 x10: 0000000000000b00
[   17.561819] x9 : ffff000100d9bb90 x8 : ffff802fb89d6560
[   17.570829] x7 : 0000000000000004 x6 : 00000004a1801d05
[   17.579839] x5 : 0000000000000000 x4 : 0000000000000000
[   17.588852] x3 : ffff802fb89d5a00 x2 : 0000000000000000
[   17.597734] x1 : 0000000200000000 x0 : 0000000200000000
[   17.606631] Process kworker/u130:0 (pid: 95, stack limit = 0x(____ptrval____))
[   17.617438] Call trace:
[   17.623349]  __mutex_lock.isra.1+0x74/0x540
[   17.630927]  __mutex_lock_slowpath+0x24/0x30
[   17.638602]  mutex_lock+0x50/0x60
[   17.645295]  drain_workqueue+0x34/0x198
[   17.652623]  __sas_drain_work+0x7c/0x168
[   17.659903]  sas_drain_work+0x60/0x68
[   17.666947]  hisi_sas_scan_finished+0x30/0x40 [hisi_sas_main]
[   17.676129]  do_scsi_scan_host+0x70/0xb0
[   17.683534]  do_scan_async+0x20/0x228
[   17.690586]  async_run_entry_fn+0x4c/0x1d0
[   17.697997]  process_one_work+0x1b4/0x3f8
[   17.705296]  worker_thread+0x54/0x470

Every time the call trace is not the same, but the overwrite address
is always the same:
Unable to handle kernel paging request at virtual address 0000000200000040

The root cause is, when write the reg XGMAC_MAC_TX_LF_RF_CONTROL_REG,
didn't use the io_base offset.

Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/hisilicon/hns/hns_dsaf_xgmac.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_xgmac.c b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_xgmac.c
index 51e7e9f5af49..70de7b5d28af 100644
--- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_xgmac.c
+++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_xgmac.c
@@ -129,7 +129,7 @@ static void hns_xgmac_lf_rf_control_init(struct mac_driver *mac_drv)
 	dsaf_set_bit(val, XGMAC_UNIDIR_EN_B, 0);
 	dsaf_set_bit(val, XGMAC_RF_TX_EN_B, 1);
 	dsaf_set_field(val, XGMAC_LF_RF_INSERT_M, XGMAC_LF_RF_INSERT_S, 0);
-	dsaf_write_reg(mac_drv, XGMAC_MAC_TX_LF_RF_CONTROL_REG, val);
+	dsaf_write_dev(mac_drv, XGMAC_MAC_TX_LF_RF_CONTROL_REG, val);
 }
 
 /**
-- 
2.19.1

[PATCH AUTOSEL 4.14 27/35] net: hns: fix ICMP6 neighbor solicitation messages discard problem

[Sasha Levin]

From: Yonglong Liu <liuyonglong@huawei.com>

[ Upstream commit f058e46855dcbc28edb2ed4736f38a71fd19cadb ]

ICMP6 neighbor solicitation messages will be discard by the Hip06
chips, because of not setting forwarding pool. Enable promisc mode
has the same problem.

This patch fix the wrong forwarding table configs for the multicast
vague matching when enable promisc mode, and add forwarding pool
for the forwarding table.

Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../ethernet/hisilicon/hns/hns_dsaf_main.c    | 33 +++++++++++++++----
 1 file changed, 27 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c
index 7e82dfbb4340..7d0f3cd8a002 100644
--- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c
+++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c
@@ -2743,6 +2743,17 @@ int hns_dsaf_get_regs_count(void)
 	return DSAF_DUMP_REGS_NUM;
 }
 
+static int hns_dsaf_get_port_id(u8 port)
+{
+	if (port < DSAF_SERVICE_NW_NUM)
+		return port;
+
+	if (port >= DSAF_BASE_INNER_PORT_NUM)
+		return port - DSAF_BASE_INNER_PORT_NUM + DSAF_SERVICE_NW_NUM;
+
+	return -EINVAL;
+}
+
 static void set_promisc_tcam_enable(struct dsaf_device *dsaf_dev, u32 port)
 {
 	struct dsaf_tbl_tcam_ucast_cfg tbl_tcam_ucast = {0, 1, 0, 0, 0x80};
@@ -2808,23 +2819,33 @@ static void set_promisc_tcam_enable(struct dsaf_device *dsaf_dev, u32 port)
 	memset(&temp_key, 0x0, sizeof(temp_key));
 	mask_entry.addr[0] = 0x01;
 	hns_dsaf_set_mac_key(dsaf_dev, &mask_key, mask_entry.in_vlan_id,
-			     port, mask_entry.addr);
+			     0xf, mask_entry.addr);
 	tbl_tcam_mcast.tbl_mcast_item_vld = 1;
 	tbl_tcam_mcast.tbl_mcast_old_en = 0;
 
-	if (port < DSAF_SERVICE_NW_NUM) {
-		mskid = port;
-	} else if (port >= DSAF_BASE_INNER_PORT_NUM) {
-		mskid = port - DSAF_BASE_INNER_PORT_NUM + DSAF_SERVICE_NW_NUM;
-	} else {
+	/* set MAC port to handle multicast */
+	mskid = hns_dsaf_get_port_id(port);
+	if (mskid == -EINVAL) {
 		dev_err(dsaf_dev->dev, "%s,pnum(%d)error,key(%#x:%#x)\n",
 			dsaf_dev->ae_dev.name, port,
 			mask_key.high.val, mask_key.low.val);
 		return;
 	}
+	dsaf_set_bit(tbl_tcam_mcast.tbl_mcast_port_msk[mskid / 32],
+		     mskid % 32, 1);
 
+	/* set pool bit map to handle multicast */
+	mskid = hns_dsaf_get_port_id(port_num);
+	if (mskid == -EINVAL) {
+		dev_err(dsaf_dev->dev,
+			"%s, pool bit map pnum(%d)error,key(%#x:%#x)\n",
+			dsaf_dev->ae_dev.name, port_num,
+			mask_key.high.val, mask_key.low.val);
+		return;
+	}
 	dsaf_set_bit(tbl_tcam_mcast.tbl_mcast_port_msk[mskid / 32],
 		     mskid % 32, 1);
+
 	memcpy(&temp_key, &mask_key, sizeof(mask_key));
 	hns_dsaf_tcam_mc_cfg_vague(dsaf_dev, entry_index, &tbl_tcam_data_mc,
 				   (struct dsaf_tbl_tcam_data *)(&mask_key),
-- 
2.19.1

[PATCH AUTOSEL 4.14 28/35] net: hns: Fix WARNING when remove HNS driver with SMMU enabled

[Sasha Levin]

From: Yonglong Liu <liuyonglong@huawei.com>

[ Upstream commit 8601a99d7c0256b7a7fdd1ab14cf6c1f1dfcadc6 ]

When enable SMMU, remove HNS driver will cause a WARNING:

[  141.924177] WARNING: CPU: 36 PID: 2708 at drivers/iommu/dma-iommu.c:443 __iommu_dma_unmap+0xc0/0xc8
[  141.954673] Modules linked in: hns_enet_drv(-)
[  141.963615] CPU: 36 PID: 2708 Comm: rmmod Tainted: G        W         5.0.0-rc1-28723-gb729c57de95c-dirty #32
[  141.983593] Hardware name: Huawei D05/D05, BIOS Hisilicon D05 UEFI Nemo 1.8 RC0 08/31/2017
[  142.000244] pstate: 60000005 (nZCv daif -PAN -UAO)
[  142.009886] pc : __iommu_dma_unmap+0xc0/0xc8
[  142.018476] lr : __iommu_dma_unmap+0xc0/0xc8
[  142.027066] sp : ffff000013533b90
[  142.033728] x29: ffff000013533b90 x28: ffff8013e6983600
[  142.044420] x27: 0000000000000000 x26: 0000000000000000
[  142.055113] x25: 0000000056000000 x24: 0000000000000015
[  142.065806] x23: 0000000000000028 x22: ffff8013e66eee68
[  142.076499] x21: ffff8013db919800 x20: 0000ffffefbff000
[  142.087192] x19: 0000000000001000 x18: 0000000000000007
[  142.097885] x17: 000000000000000e x16: 0000000000000001
[  142.108578] x15: 0000000000000019 x14: 363139343a70616d
[  142.119270] x13: 6e75656761705f67 x12: 0000000000000000
[  142.129963] x11: 00000000ffffffff x10: 0000000000000006
[  142.140656] x9 : 1346c1aa88093500 x8 : ffff0000114de4e0
[  142.151349] x7 : 6662666578303d72 x6 : ffff0000105ffec8
[  142.162042] x5 : 0000000000000000 x4 : 0000000000000000
[  142.172734] x3 : 00000000ffffffff x2 : ffff0000114de500
[  142.183427] x1 : 0000000000000000 x0 : 0000000000000035
[  142.194120] Call trace:
[  142.199030]  __iommu_dma_unmap+0xc0/0xc8
[  142.206920]  iommu_dma_unmap_page+0x20/0x28
[  142.215335]  __iommu_unmap_page+0x40/0x60
[  142.223399]  hnae_unmap_buffer+0x110/0x134
[  142.231639]  hnae_free_desc+0x6c/0x10c
[  142.239177]  hnae_fini_ring+0x14/0x34
[  142.246540]  hnae_fini_queue+0x2c/0x40
[  142.254080]  hnae_put_handle+0x38/0xcc
[  142.261619]  hns_nic_dev_remove+0x54/0xfc [hns_enet_drv]
[  142.272312]  platform_drv_remove+0x24/0x64
[  142.280552]  device_release_driver_internal+0x17c/0x20c
[  142.291070]  driver_detach+0x4c/0x90
[  142.298259]  bus_remove_driver+0x5c/0xd8
[  142.306148]  driver_unregister+0x2c/0x54
[  142.314037]  platform_driver_unregister+0x10/0x18
[  142.323505]  hns_nic_dev_driver_exit+0x14/0xf0c [hns_enet_drv]
[  142.335248]  __arm64_sys_delete_module+0x214/0x25c
[  142.344891]  el0_svc_common+0xb0/0x10c
[  142.352430]  el0_svc_handler+0x24/0x80
[  142.359968]  el0_svc+0x8/0x7c0
[  142.366104] ---[ end trace 60ad1cd58e63c407 ]---

The tx ring buffer map when xmit and unmap when xmit done. So in
hnae_init_ring() did not map tx ring buffer, but in hnae_fini_ring()
have a unmap operation for tx ring buffer, which is already unmapped
when xmit done, than cause this WARNING.

The hnae_alloc_buffers() is called in hnae_init_ring(),
so the hnae_free_buffers() should be in hnae_fini_ring(), not in
hnae_free_desc().

In hnae_fini_ring(), adds a check is_rx_ring() as in hnae_init_ring().
When the ring buffer is tx ring, adds a piece of code to ensure that
the tx ring is unmap.

Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/hisilicon/hns/hnae.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/hisilicon/hns/hnae.c b/drivers/net/ethernet/hisilicon/hns/hnae.c
index 79d03f8ee7b1..c7fa97a7e1f4 100644
--- a/drivers/net/ethernet/hisilicon/hns/hnae.c
+++ b/drivers/net/ethernet/hisilicon/hns/hnae.c
@@ -150,7 +150,6 @@ static int hnae_alloc_buffers(struct hnae_ring *ring)
 /* free desc along with its attached buffer */
 static void hnae_free_desc(struct hnae_ring *ring)
 {
-	hnae_free_buffers(ring);
 	dma_unmap_single(ring_to_dev(ring), ring->desc_dma_addr,
 			 ring->desc_num * sizeof(ring->desc[0]),
 			 ring_to_dma_dir(ring));
@@ -183,6 +182,9 @@ static int hnae_alloc_desc(struct hnae_ring *ring)
 /* fini ring, also free the buffer for the ring */
 static void hnae_fini_ring(struct hnae_ring *ring)
 {
+	if (is_rx_ring(ring))
+		hnae_free_buffers(ring);
+
 	hnae_free_desc(ring);
 	kfree(ring->desc_cb);
 	ring->desc_cb = NULL;
-- 
2.19.1

[PATCH AUTOSEL 4.14 29/35] kmemleak: powerpc: skip scanning holes in the .bss section

[Sasha Levin]

From: Catalin Marinas <catalin.marinas@arm.com>

[ Upstream commit 298a32b132087550d3fa80641ca58323c5dfd4d9 ]

Commit 2d4f567103ff ("KVM: PPC: Introduce kvm_tmp framework") adds
kvm_tmp[] into the .bss section and then free the rest of unused spaces
back to the page allocator.

kernel_init
  kvm_guest_init
    kvm_free_tmp
      free_reserved_area
        free_unref_page
          free_unref_page_prepare

With DEBUG_PAGEALLOC=y, it will unmap those pages from kernel.  As the
result, kmemleak scan will trigger a panic when it scans the .bss
section with unmapped pages.

This patch creates dedicated kmemleak objects for the .data, .bss and
potentially .data..ro_after_init sections to allow partial freeing via
the kmemleak_free_part() in the powerpc kvm_free_tmp() function.

Link: http://lkml.kernel.org/r/20190321171917.62049-1-catalin.marinas@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: Qian Cai <cai@lca.pw>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Tested-by: Qian Cai <cai@lca.pw>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Avi Kivity <avi@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krcmar <rkrcmar@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/kernel/kvm.c |  7 +++++++
 mm/kmemleak.c             | 16 +++++++++++-----
 2 files changed, 18 insertions(+), 5 deletions(-)

diff --git a/arch/powerpc/kernel/kvm.c b/arch/powerpc/kernel/kvm.c
index 9ad37f827a97..7b59cc853abf 100644
--- a/arch/powerpc/kernel/kvm.c
+++ b/arch/powerpc/kernel/kvm.c
@@ -22,6 +22,7 @@
 #include <linux/kvm_host.h>
 #include <linux/init.h>
 #include <linux/export.h>
+#include <linux/kmemleak.h>
 #include <linux/kvm_para.h>
 #include <linux/slab.h>
 #include <linux/of.h>
@@ -712,6 +713,12 @@ static void kvm_use_magic_page(void)
 
 static __init void kvm_free_tmp(void)
 {
+	/*
+	 * Inform kmemleak about the hole in the .bss section since the
+	 * corresponding pages will be unmapped with DEBUG_PAGEALLOC=y.
+	 */
+	kmemleak_free_part(&kvm_tmp[kvm_tmp_index],
+			   ARRAY_SIZE(kvm_tmp) - kvm_tmp_index);
 	free_reserved_area(&kvm_tmp[kvm_tmp_index],
 			   &kvm_tmp[ARRAY_SIZE(kvm_tmp)], -1, NULL);
 }
diff --git a/mm/kmemleak.c b/mm/kmemleak.c
index d9e0be2a8189..337be9aacb7a 100644
--- a/mm/kmemleak.c
+++ b/mm/kmemleak.c
@@ -1492,11 +1492,6 @@ static void kmemleak_scan(void)
 	}
 	rcu_read_unlock();
 
-	/* data/bss scanning */
-	scan_large_block(_sdata, _edata);
-	scan_large_block(__bss_start, __bss_stop);
-	scan_large_block(__start_ro_after_init, __end_ro_after_init);
-
 #ifdef CONFIG_SMP
 	/* per-cpu sections scanning */
 	for_each_possible_cpu(i)
@@ -2027,6 +2022,17 @@ void __init kmemleak_init(void)
 	}
 	local_irq_restore(flags);
 
+	/* register the data/bss sections */
+	create_object((unsigned long)_sdata, _edata - _sdata,
+		      KMEMLEAK_GREY, GFP_ATOMIC);
+	create_object((unsigned long)__bss_start, __bss_stop - __bss_start,
+		      KMEMLEAK_GREY, GFP_ATOMIC);
+	/* only register .data..ro_after_init if not within .data */
+	if (__start_ro_after_init < _sdata || __end_ro_after_init > _edata)
+		create_object((unsigned long)__start_ro_after_init,
+			      __end_ro_after_init - __start_ro_after_init,
+			      KMEMLEAK_GREY, GFP_ATOMIC);
+
 	/*
 	 * This is the point where tracking allocations is safe. Automatic
 	 * scanning is started during the late initcall. Add the early logged
-- 
2.19.1

[PATCH AUTOSEL 4.14 30/35] hugetlbfs: fix memory leak for resv_map

[Sasha Levin]

From: Mike Kravetz <mike.kravetz@oracle.com>

[ Upstream commit 58b6e5e8f1addd44583d61b0a03c0f5519527e35 ]

When mknod is used to create a block special file in hugetlbfs, it will
allocate an inode and kmalloc a 'struct resv_map' via resv_map_alloc().
inode->i_mapping->private_data will point the newly allocated resv_map.
However, when the device special file is opened bd_acquire() will set
inode->i_mapping to bd_inode->i_mapping.  Thus the pointer to the
allocated resv_map is lost and the structure is leaked.

Programs to reproduce:
        mount -t hugetlbfs nodev hugetlbfs
        mknod hugetlbfs/dev b 0 0
        exec 30<> hugetlbfs/dev
        umount hugetlbfs/

resv_map structures are only needed for inodes which can have associated
page allocations.  To fix the leak, only allocate resv_map for those
inodes which could possibly be associated with page allocations.

Link: http://lkml.kernel.org/r/20190401213101.16476-1-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Reported-by: Yufen Yu <yuyufen@huawei.com>
Suggested-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/hugetlbfs/inode.c | 20 ++++++++++++++------
 1 file changed, 14 insertions(+), 6 deletions(-)

diff --git a/fs/hugetlbfs/inode.c b/fs/hugetlbfs/inode.c
index eb6f3de29f69..dd28a9b287da 100644
--- a/fs/hugetlbfs/inode.c
+++ b/fs/hugetlbfs/inode.c
@@ -730,11 +730,17 @@ static struct inode *hugetlbfs_get_inode(struct super_block *sb,
 					umode_t mode, dev_t dev)
 {
 	struct inode *inode;
-	struct resv_map *resv_map;
+	struct resv_map *resv_map = NULL;
 
-	resv_map = resv_map_alloc();
-	if (!resv_map)
-		return NULL;
+	/*
+	 * Reserve maps are only needed for inodes that can have associated
+	 * page allocations.
+	 */
+	if (S_ISREG(mode) || S_ISLNK(mode)) {
+		resv_map = resv_map_alloc();
+		if (!resv_map)
+			return NULL;
+	}
 
 	inode = new_inode(sb);
 	if (inode) {
@@ -766,8 +772,10 @@ static struct inode *hugetlbfs_get_inode(struct super_block *sb,
 			break;
 		}
 		lockdep_annotate_inode_mutex_key(inode);
-	} else
-		kref_put(&resv_map->refs, resv_map_release);
+	} else {
+		if (resv_map)
+			kref_put(&resv_map->refs, resv_map_release);
+	}
 
 	return inode;
 }
-- 
2.19.1

[PATCH AUTOSEL 4.14 31/35] sh: fix multiple function definition build errors

[Sasha Levin]

From: Randy Dunlap <rdunlap@infradead.org>

[ Upstream commit acaf892ecbf5be7710ae05a61fd43c668f68ad95 ]

Many of the sh CPU-types have their own plat_irq_setup() and
arch_init_clk_ops() functions, so these same (empty) functions in
arch/sh/boards/of-generic.c are not needed and cause build errors.

If there is some case where these empty functions are needed, they can
be retained by marking them as "__weak" while at the same time making
builds that do not need them succeed.

Fixes these build errors:

arch/sh/boards/of-generic.o: In function `plat_irq_setup':
(.init.text+0x134): multiple definition of `plat_irq_setup'
arch/sh/kernel/cpu/sh2/setup-sh7619.o:(.init.text+0x30): first defined here
arch/sh/boards/of-generic.o: In function `arch_init_clk_ops':
(.init.text+0x118): multiple definition of `arch_init_clk_ops'
arch/sh/kernel/cpu/sh2/clock-sh7619.o:(.init.text+0x0): first defined here

Link: http://lkml.kernel.org/r/9ee4e0c5-f100-86a2-bd4d-1d3287ceab31@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kbuild test robot <lkp@intel.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/sh/boards/of-generic.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/sh/boards/of-generic.c b/arch/sh/boards/of-generic.c
index 4feb7c86f4ac..5e83ea12303b 100644
--- a/arch/sh/boards/of-generic.c
+++ b/arch/sh/boards/of-generic.c
@@ -180,10 +180,10 @@ static struct sh_machine_vector __initmv sh_of_generic_mv = {
 
 struct sh_clk_ops;
 
-void __init arch_init_clk_ops(struct sh_clk_ops **ops, int idx)
+void __init __weak arch_init_clk_ops(struct sh_clk_ops **ops, int idx)
 {
 }
 
-void __init plat_irq_setup(void)
+void __init __weak plat_irq_setup(void)
 {
 }
-- 
2.19.1

[PATCH AUTOSEL 4.14 32/35] kernel/sysctl.c: fix out-of-bounds access when setting file-max

[Sasha Levin]

From: Will Deacon <will.deacon@arm.com>

[ Upstream commit 9002b21465fa4d829edfc94a5a441005cffaa972 ]

Commit 32a5ad9c2285 ("sysctl: handle overflow for file-max") hooked up
min/max values for the file-max sysctl parameter via the .extra1 and
.extra2 fields in the corresponding struct ctl_table entry.

Unfortunately, the minimum value points at the global 'zero' variable,
which is an int.  This results in a KASAN splat when accessed as a long
by proc_doulongvec_minmax on 64-bit architectures:

  | BUG: KASAN: global-out-of-bounds in __do_proc_doulongvec_minmax+0x5d8/0x6a0
  | Read of size 8 at addr ffff2000133d1c20 by task systemd/1
  |
  | CPU: 0 PID: 1 Comm: systemd Not tainted 5.1.0-rc3-00012-g40b114779944 #2
  | Hardware name: linux,dummy-virt (DT)
  | Call trace:
  |  dump_backtrace+0x0/0x228
  |  show_stack+0x14/0x20
  |  dump_stack+0xe8/0x124
  |  print_address_description+0x60/0x258
  |  kasan_report+0x140/0x1a0
  |  __asan_report_load8_noabort+0x18/0x20
  |  __do_proc_doulongvec_minmax+0x5d8/0x6a0
  |  proc_doulongvec_minmax+0x4c/0x78
  |  proc_sys_call_handler.isra.19+0x144/0x1d8
  |  proc_sys_write+0x34/0x58
  |  __vfs_write+0x54/0xe8
  |  vfs_write+0x124/0x3c0
  |  ksys_write+0xbc/0x168
  |  __arm64_sys_write+0x68/0x98
  |  el0_svc_common+0x100/0x258
  |  el0_svc_handler+0x48/0xc0
  |  el0_svc+0x8/0xc
  |
  | The buggy address belongs to the variable:
  |  zero+0x0/0x40
  |
  | Memory state around the buggy address:
  |  ffff2000133d1b00: 00 00 00 00 00 00 00 00 fa fa fa fa 04 fa fa fa
  |  ffff2000133d1b80: fa fa fa fa 04 fa fa fa fa fa fa fa 04 fa fa fa
  | >ffff2000133d1c00: fa fa fa fa 04 fa fa fa fa fa fa fa 00 00 00 00
  |                                ^
  |  ffff2000133d1c80: fa fa fa fa 00 fa fa fa fa fa fa fa 00 00 00 00
  |  ffff2000133d1d00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

Fix the splat by introducing a unsigned long 'zero_ul' and using that
instead.

Link: http://lkml.kernel.org/r/20190403153409.17307-1-will.deacon@arm.com
Fixes: 32a5ad9c2285 ("sysctl: handle overflow for file-max")
Signed-off-by: Will Deacon <will.deacon@arm.com>
Acked-by: Christian Brauner <christian@brauner.io>
Cc: Kees Cook <keescook@chromium.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Matteo Croce <mcroce@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/sysctl.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index 34a3b8a262a9..f13601a616ad 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -124,6 +124,7 @@ static int zero;
 static int __maybe_unused one = 1;
 static int __maybe_unused two = 2;
 static int __maybe_unused four = 4;
+static unsigned long zero_ul;
 static unsigned long one_ul = 1;
 static unsigned long long_max = LONG_MAX;
 static int one_hundred = 100;
@@ -1682,7 +1683,7 @@ static struct ctl_table fs_table[] = {
 		.maxlen		= sizeof(files_stat.max_files),
 		.mode		= 0644,
 		.proc_handler	= proc_doulongvec_minmax,
-		.extra1		= &zero,
+		.extra1		= &zero_ul,
 		.extra2		= &long_max,
 	},
 	{
-- 
2.19.1

[PATCH AUTOSEL 4.14 33/35] xsysace: Fix error handling in ace_setup

[Sasha Levin]

From: Guenter Roeck <linux@roeck-us.net>

[ Upstream commit 47b16820c490149c2923e8474048f2c6e7557cab ]

If xace hardware reports a bad version number, the error handling code
in ace_setup() calls put_disk(), followed by queue cleanup. However, since
the disk data structure has the queue pointer set, put_disk() also
cleans and releases the queue. This results in blk_cleanup_queue()
accessing an already released data structure, which in turn may result
in a crash such as the following.

[   10.681671] BUG: Kernel NULL pointer dereference at 0x00000040
[   10.681826] Faulting instruction address: 0xc0431480
[   10.682072] Oops: Kernel access of bad area, sig: 11 [#1]
[   10.682251] BE PAGE_SIZE=4K PREEMPT Xilinx Virtex440
[   10.682387] Modules linked in:
[   10.682528] CPU: 0 PID: 1 Comm: swapper Tainted: G        W         5.0.0-rc6-next-20190218+ #2
[   10.682733] NIP:  c0431480 LR: c043147c CTR: c0422ad8
[   10.682863] REGS: cf82fbe0 TRAP: 0300   Tainted: G        W          (5.0.0-rc6-next-20190218+)
[   10.683065] MSR:  00029000 <CE,EE,ME>  CR: 22000222  XER: 00000000
[   10.683236] DEAR: 00000040 ESR: 00000000
[   10.683236] GPR00: c043147c cf82fc90 cf82ccc0 00000000 00000000 00000000 00000002 00000000
[   10.683236] GPR08: 00000000 00000000 c04310bc 00000000 22000222 00000000 c0002c54 00000000
[   10.683236] GPR16: 00000000 00000001 c09aa39c c09021b0 c09021dc 00000007 c0a68c08 00000000
[   10.683236] GPR24: 00000001 ced6d400 ced6dcf0 c0815d9c 00000000 00000000 00000000 cedf0800
[   10.684331] NIP [c0431480] blk_mq_run_hw_queue+0x28/0x114
[   10.684473] LR [c043147c] blk_mq_run_hw_queue+0x24/0x114
[   10.684602] Call Trace:
[   10.684671] [cf82fc90] [c043147c] blk_mq_run_hw_queue+0x24/0x114 (unreliable)
[   10.684854] [cf82fcc0] [c04315bc] blk_mq_run_hw_queues+0x50/0x7c
[   10.685002] [cf82fce0] [c0422b24] blk_set_queue_dying+0x30/0x68
[   10.685154] [cf82fcf0] [c0423ec0] blk_cleanup_queue+0x34/0x14c
[   10.685306] [cf82fd10] [c054d73c] ace_probe+0x3dc/0x508
[   10.685445] [cf82fd50] [c052d740] platform_drv_probe+0x4c/0xb8
[   10.685592] [cf82fd70] [c052abb0] really_probe+0x20c/0x32c
[   10.685728] [cf82fda0] [c052ae58] driver_probe_device+0x68/0x464
[   10.685877] [cf82fdc0] [c052b500] device_driver_attach+0xb4/0xe4
[   10.686024] [cf82fde0] [c052b5dc] __driver_attach+0xac/0xfc
[   10.686161] [cf82fe00] [c0528428] bus_for_each_dev+0x80/0xc0
[   10.686314] [cf82fe30] [c0529b3c] bus_add_driver+0x144/0x234
[   10.686457] [cf82fe50] [c052c46c] driver_register+0x88/0x15c
[   10.686610] [cf82fe60] [c09de288] ace_init+0x4c/0xac
[   10.686742] [cf82fe80] [c0002730] do_one_initcall+0xac/0x330
[   10.686888] [cf82fee0] [c09aafd0] kernel_init_freeable+0x34c/0x478
[   10.687043] [cf82ff30] [c0002c6c] kernel_init+0x18/0x114
[   10.687188] [cf82ff40] [c000f2f0] ret_from_kernel_thread+0x14/0x1c
[   10.687349] Instruction dump:
[   10.687435] 3863ffd4 4bfffd70 9421ffd0 7c0802a6 93c10028 7c9e2378 93e1002c 38810008
[   10.687637] 7c7f1b78 90010034 4bfffc25 813f008c <81290040> 75290100 4182002c 80810008
[   10.688056] ---[ end trace 13c9ff51d41b9d40 ]---

Fix the problem by setting the disk queue pointer to NULL before calling
put_disk(). A more comprehensive fix might be to rearrange the code
to check the hardware version before initializing data structures,
but I don't know if this would have undesirable side effects, and
it would increase the complexity of backporting the fix to older kernels.

Fixes: 74489a91dd43a ("Add support for Xilinx SystemACE CompactFlash interface")
Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/block/xsysace.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/block/xsysace.c b/drivers/block/xsysace.c
index 14459d66ef0c..51ff7ee1b2b1 100644
--- a/drivers/block/xsysace.c
+++ b/drivers/block/xsysace.c
@@ -1063,6 +1063,8 @@ static int ace_setup(struct ace_device *ace)
 	return 0;
 
 err_read:
+	/* prevent double queue cleanup */
+	ace->gd->queue = NULL;
 	put_disk(ace->gd);
 err_alloc_disk:
 	blk_cleanup_queue(ace->queue);
-- 
2.19.1

[PATCH AUTOSEL 4.14 34/35] ARM: orion: don't use using 64-bit DMA masks

[Sasha Levin]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit cd92d74d67c811dc22544430b9ac3029f5bd64c5 ]

clang warns about statically defined DMA masks from the DMA_BIT_MASK
macro with length 64:

arch/arm/plat-orion/common.c:625:29: error: shift count >= width of type [-Werror,-Wshift-count-overflow]
                .coherent_dma_mask      = DMA_BIT_MASK(64),
                                          ^~~~~~~~~~~~~~~~
include/linux/dma-mapping.h:141:54: note: expanded from macro 'DMA_BIT_MASK'
 #define DMA_BIT_MASK(n) (((n) == 64) ? ~0ULL : ((1ULL<<(n))-1))

The ones in orion shouldn't really be 64 bit masks, so changing them
to what the driver can support avoids the warning.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/plat-orion/common.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/plat-orion/common.c b/arch/arm/plat-orion/common.c
index a2399fd66e97..1e970873439c 100644
--- a/arch/arm/plat-orion/common.c
+++ b/arch/arm/plat-orion/common.c
@@ -622,7 +622,7 @@ static struct platform_device orion_xor0_shared = {
 	.resource	= orion_xor0_shared_resources,
 	.dev            = {
 		.dma_mask               = &orion_xor_dmamask,
-		.coherent_dma_mask      = DMA_BIT_MASK(64),
+		.coherent_dma_mask      = DMA_BIT_MASK(32),
 		.platform_data          = &orion_xor0_pdata,
 	},
 };
@@ -683,7 +683,7 @@ static struct platform_device orion_xor1_shared = {
 	.resource	= orion_xor1_shared_resources,
 	.dev            = {
 		.dma_mask               = &orion_xor_dmamask,
-		.coherent_dma_mask      = DMA_BIT_MASK(64),
+		.coherent_dma_mask      = DMA_BIT_MASK(32),
 		.platform_data          = &orion_xor1_pdata,
 	},
 };
-- 
2.19.1

[PATCH AUTOSEL 4.14 35/35] ARM: iop: don't use using 64-bit DMA masks

[Sasha Levin]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit 2125801ccce19249708ca3245d48998e70569ab8 ]

clang warns about statically defined DMA masks from the DMA_BIT_MASK
macro with length 64:

 arch/arm/mach-iop13xx/setup.c:303:35: error: shift count >= width of type [-Werror,-Wshift-count-overflow]
 static u64 iop13xx_adma_dmamask = DMA_BIT_MASK(64);
                                  ^~~~~~~~~~~~~~~~
 include/linux/dma-mapping.h:141:54: note: expanded from macro 'DMA_BIT_MASK'
 #define DMA_BIT_MASK(n) (((n) == 64) ? ~0ULL : ((1ULL<<(n))-1))
                                                      ^ ~~~

The ones in iop shouldn't really be 64 bit masks, so changing them
to what the driver can support avoids the warning.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/mach-iop13xx/setup.c |  8 ++++----
 arch/arm/mach-iop13xx/tpmi.c  | 10 +++++-----
 arch/arm/plat-iop/adma.c      |  6 +++---
 3 files changed, 12 insertions(+), 12 deletions(-)

diff --git a/arch/arm/mach-iop13xx/setup.c b/arch/arm/mach-iop13xx/setup.c
index 53c316f7301e..fe4932fda01d 100644
--- a/arch/arm/mach-iop13xx/setup.c
+++ b/arch/arm/mach-iop13xx/setup.c
@@ -300,7 +300,7 @@ static struct resource iop13xx_adma_2_resources[] = {
 	}
 };
 
-static u64 iop13xx_adma_dmamask = DMA_BIT_MASK(64);
+static u64 iop13xx_adma_dmamask = DMA_BIT_MASK(32);
 static struct iop_adma_platform_data iop13xx_adma_0_data = {
 	.hw_id = 0,
 	.pool_size = PAGE_SIZE,
@@ -324,7 +324,7 @@ static struct platform_device iop13xx_adma_0_channel = {
 	.resource = iop13xx_adma_0_resources,
 	.dev = {
 		.dma_mask = &iop13xx_adma_dmamask,
-		.coherent_dma_mask = DMA_BIT_MASK(64),
+		.coherent_dma_mask = DMA_BIT_MASK(32),
 		.platform_data = (void *) &iop13xx_adma_0_data,
 	},
 };
@@ -336,7 +336,7 @@ static struct platform_device iop13xx_adma_1_channel = {
 	.resource = iop13xx_adma_1_resources,
 	.dev = {
 		.dma_mask = &iop13xx_adma_dmamask,
-		.coherent_dma_mask = DMA_BIT_MASK(64),
+		.coherent_dma_mask = DMA_BIT_MASK(32),
 		.platform_data = (void *) &iop13xx_adma_1_data,
 	},
 };
@@ -348,7 +348,7 @@ static struct platform_device iop13xx_adma_2_channel = {
 	.resource = iop13xx_adma_2_resources,
 	.dev = {
 		.dma_mask = &iop13xx_adma_dmamask,
-		.coherent_dma_mask = DMA_BIT_MASK(64),
+		.coherent_dma_mask = DMA_BIT_MASK(32),
 		.platform_data = (void *) &iop13xx_adma_2_data,
 	},
 };
diff --git a/arch/arm/mach-iop13xx/tpmi.c b/arch/arm/mach-iop13xx/tpmi.c
index db511ec2b1df..116feb6b261e 100644
--- a/arch/arm/mach-iop13xx/tpmi.c
+++ b/arch/arm/mach-iop13xx/tpmi.c
@@ -152,7 +152,7 @@ static struct resource iop13xx_tpmi_3_resources[] = {
 	}
 };
 
-u64 iop13xx_tpmi_mask = DMA_BIT_MASK(64);
+u64 iop13xx_tpmi_mask = DMA_BIT_MASK(32);
 static struct platform_device iop13xx_tpmi_0_device = {
 	.name = "iop-tpmi",
 	.id = 0,
@@ -160,7 +160,7 @@ static struct platform_device iop13xx_tpmi_0_device = {
 	.resource = iop13xx_tpmi_0_resources,
 	.dev = {
 		.dma_mask          = &iop13xx_tpmi_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(64),
+		.coherent_dma_mask = DMA_BIT_MASK(32),
 	},
 };
 
@@ -171,7 +171,7 @@ static struct platform_device iop13xx_tpmi_1_device = {
 	.resource = iop13xx_tpmi_1_resources,
 	.dev = {
 		.dma_mask          = &iop13xx_tpmi_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(64),
+		.coherent_dma_mask = DMA_BIT_MASK(32),
 	},
 };
 
@@ -182,7 +182,7 @@ static struct platform_device iop13xx_tpmi_2_device = {
 	.resource = iop13xx_tpmi_2_resources,
 	.dev = {
 		.dma_mask          = &iop13xx_tpmi_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(64),
+		.coherent_dma_mask = DMA_BIT_MASK(32),
 	},
 };
 
@@ -193,7 +193,7 @@ static struct platform_device iop13xx_tpmi_3_device = {
 	.resource = iop13xx_tpmi_3_resources,
 	.dev = {
 		.dma_mask          = &iop13xx_tpmi_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(64),
+		.coherent_dma_mask = DMA_BIT_MASK(32),
 	},
 };
 
diff --git a/arch/arm/plat-iop/adma.c b/arch/arm/plat-iop/adma.c
index a4d1f8de3b5b..d9612221e484 100644
--- a/arch/arm/plat-iop/adma.c
+++ b/arch/arm/plat-iop/adma.c
@@ -143,7 +143,7 @@ struct platform_device iop3xx_dma_0_channel = {
 	.resource = iop3xx_dma_0_resources,
 	.dev = {
 		.dma_mask = &iop3xx_adma_dmamask,
-		.coherent_dma_mask = DMA_BIT_MASK(64),
+		.coherent_dma_mask = DMA_BIT_MASK(32),
 		.platform_data = (void *) &iop3xx_dma_0_data,
 	},
 };
@@ -155,7 +155,7 @@ struct platform_device iop3xx_dma_1_channel = {
 	.resource = iop3xx_dma_1_resources,
 	.dev = {
 		.dma_mask = &iop3xx_adma_dmamask,
-		.coherent_dma_mask = DMA_BIT_MASK(64),
+		.coherent_dma_mask = DMA_BIT_MASK(32),
 		.platform_data = (void *) &iop3xx_dma_1_data,
 	},
 };
@@ -167,7 +167,7 @@ struct platform_device iop3xx_aau_channel = {
 	.resource = iop3xx_aau_resources,
 	.dev = {
 		.dma_mask = &iop3xx_adma_dmamask,
-		.coherent_dma_mask = DMA_BIT_MASK(64),
+		.coherent_dma_mask = DMA_BIT_MASK(32),
 		.platform_data = (void *) &iop3xx_aau_data,
 	},
 };
-- 
2.19.1