stable.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	stable@vger.kernel.org, Lukas Wunner <lukas@wunner.de>,
	Frank Pavlic <f.pavlic@kunbus.de>,
	Ben Dooks <ben.dooks@codethink.co.uk>,
	Tristram Ha <Tristram.Ha@microchip.com>,
	"David S. Miller" <davem@davemloft.net>,
	"Sasha Levin (Microsoft)" <sashal@kernel.org>
Subject: [PATCH 4.14 23/49] net: ks8851: Delay requesting IRQ until opened
Date: Thu,  2 May 2019 17:21:00 +0200	[thread overview]
Message-ID: <20190502143326.834120750@linuxfoundation.org> (raw)
In-Reply-To: <20190502143323.397051088@linuxfoundation.org>

[ Upstream commit d268f31552794abf5b6aa5af31021643411f25f5 ]

The ks8851 driver currently requests the IRQ before registering the
net_device.  Because the net_device name is used as IRQ name and is
still "eth%d" when the IRQ is requested, it's impossibe to tell IRQs
apart if multiple ks8851 chips are present.  Most other drivers delay
requesting the IRQ until the net_device is opened.  Do the same.

The driver doesn't enable interrupts on the chip before opening the
net_device and disables them when closing it, so there doesn't seem to
be a need to request the IRQ already on probe.

Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: Frank Pavlic <f.pavlic@kunbus.de>
Cc: Ben Dooks <ben.dooks@codethink.co.uk>
Cc: Tristram Ha <Tristram.Ha@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>
---
 drivers/net/ethernet/micrel/ks8851.c | 24 +++++++++++-------------
 1 file changed, 11 insertions(+), 13 deletions(-)

diff --git a/drivers/net/ethernet/micrel/ks8851.c b/drivers/net/ethernet/micrel/ks8851.c
index 546a79b9cb15..b8f20aa2b7ad 100644
--- a/drivers/net/ethernet/micrel/ks8851.c
+++ b/drivers/net/ethernet/micrel/ks8851.c
@@ -776,6 +776,15 @@ static void ks8851_tx_work(struct work_struct *work)
 static int ks8851_net_open(struct net_device *dev)
 {
 	struct ks8851_net *ks = netdev_priv(dev);
+	int ret;
+
+	ret = request_threaded_irq(dev->irq, NULL, ks8851_irq,
+				   IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+				   dev->name, ks);
+	if (ret < 0) {
+		netdev_err(dev, "failed to get irq\n");
+		return ret;
+	}
 
 	/* lock the card, even if we may not actually be doing anything
 	 * else at the moment */
@@ -890,6 +899,8 @@ static int ks8851_net_stop(struct net_device *dev)
 		dev_kfree_skb(txb);
 	}
 
+	free_irq(dev->irq, ks);
+
 	return 0;
 }
 
@@ -1520,14 +1531,6 @@ static int ks8851_probe(struct spi_device *spi)
 	ks8851_read_selftest(ks);
 	ks8851_init_mac(ks);
 
-	ret = request_threaded_irq(spi->irq, NULL, ks8851_irq,
-				   IRQF_TRIGGER_LOW | IRQF_ONESHOT,
-				   ndev->name, ks);
-	if (ret < 0) {
-		dev_err(&spi->dev, "failed to get irq\n");
-		goto err_irq;
-	}
-
 	ret = register_netdev(ndev);
 	if (ret) {
 		dev_err(&spi->dev, "failed to register network device\n");
@@ -1540,11 +1543,7 @@ static int ks8851_probe(struct spi_device *spi)
 
 	return 0;
 
-
 err_netdev:
-	free_irq(ndev->irq, ks);
-
-err_irq:
 err_id:
 	if (gpio_is_valid(gpio))
 		gpio_set_value(gpio, 0);
@@ -1565,7 +1564,6 @@ static int ks8851_remove(struct spi_device *spi)
 		dev_info(&spi->dev, "remove\n");
 
 	unregister_netdev(priv->netdev);
-	free_irq(spi->irq, priv);
 	if (gpio_is_valid(priv->gpio))
 		gpio_set_value(priv->gpio, 0);
 	regulator_disable(priv->vdd_reg);
-- 
2.19.1




  parent reply	other threads:[~2019-05-02 15:47 UTC|newest]

Thread overview: 55+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-02 15:20 [PATCH 4.14 00/49] 4.14.116-stable review Greg Kroah-Hartman
2019-05-02 15:20 ` [PATCH 4.14 01/49] selinux: use kernel linux/socket.h for genheaders and mdp Greg Kroah-Hartman
2019-05-02 15:20 ` [PATCH 4.14 02/49] usbnet: ipheth: prevent TX queue timeouts when device not ready Greg Kroah-Hartman
2019-05-02 15:20 ` [PATCH 4.14 03/49] usbnet: ipheth: fix potential null pointer dereference in ipheth_carrier_set Greg Kroah-Hartman
2019-05-02 15:20 ` [PATCH 4.14 04/49] mm: make page ref count overflow check tighter and more explicit Greg Kroah-Hartman
2019-05-02 15:20 ` [PATCH 4.14 05/49] mm: add try_get_page() helper function Greg Kroah-Hartman
2019-05-02 15:20 ` [PATCH 4.14 06/49] mm: prevent get_user_pages() from overflowing page refcount Greg Kroah-Hartman
2019-05-02 15:20 ` [PATCH 4.14 07/49] fs: prevent page refcount overflow in pipe_buf_get Greg Kroah-Hartman
2019-05-02 15:20 ` [PATCH 4.14 08/49] ARM: dts: bcm283x: Fix hdmi hpd gpio pull Greg Kroah-Hartman
2019-05-02 15:20 ` [PATCH 4.14 09/49] s390: limit brk randomization to 32MB Greg Kroah-Hartman
2019-05-02 15:20 ` [PATCH 4.14 10/49] qlcnic: Avoid potential NULL pointer dereference Greg Kroah-Hartman
2019-05-02 15:20 ` [PATCH 4.14 11/49] netfilter: nft_set_rbtree: check for inactive element after flag mismatch Greg Kroah-Hartman
2019-05-02 15:20 ` [PATCH 4.14 12/49] netfilter: bridge: set skb transport_header before entering NF_INET_PRE_ROUTING Greg Kroah-Hartman
2019-05-02 15:20 ` [PATCH 4.14 13/49] s390/qeth: fix race when initializing the IP address table Greg Kroah-Hartman
2019-05-02 15:20 ` [PATCH 4.14 14/49] sc16is7xx: missing unregister/delete driver on error in sc16is7xx_init() Greg Kroah-Hartman
2019-05-02 15:20 ` [PATCH 4.14 15/49] serial: ar933x_uart: Fix build failure with disabled console Greg Kroah-Hartman
2019-05-02 15:20 ` [PATCH 4.14 16/49] KVM: arm/arm64: vgic-its: Take the srcu lock when parsing the memslots Greg Kroah-Hartman
2019-05-02 15:20 ` [PATCH 4.14 17/49] usb: gadget: net2280: Fix overrun of OUT messages Greg Kroah-Hartman
2019-05-02 15:20 ` [PATCH 4.14 18/49] usb: gadget: net2280: Fix net2280_dequeue() Greg Kroah-Hartman
2019-05-02 15:20 ` [PATCH 4.14 19/49] usb: gadget: net2272: Fix net2272_dequeue() Greg Kroah-Hartman
2019-05-02 15:20 ` [PATCH 4.14 20/49] ARM: dts: pfla02: increase phy reset duration Greg Kroah-Hartman
2019-05-02 15:20 ` [PATCH 4.14 21/49] net: ks8851: Dequeue RX packets explicitly Greg Kroah-Hartman
2019-05-02 15:20 ` [PATCH 4.14 22/49] net: ks8851: Reassert reset pin if chip ID check fails Greg Kroah-Hartman
2019-05-02 15:21 ` Greg Kroah-Hartman [this message]
2019-05-02 15:21 ` [PATCH 4.14 24/49] net: ks8851: Set initial carrier state to down Greg Kroah-Hartman
2019-05-02 15:21 ` [PATCH 4.14 25/49] staging: rtl8188eu: Fix potential NULL pointer dereference of kcalloc Greg Kroah-Hartman
2019-05-02 15:21 ` [PATCH 4.14 26/49] staging: rtlwifi: rtl8822b: fix to avoid potential NULL pointer dereference Greg Kroah-Hartman
2019-05-02 15:21 ` [PATCH 4.14 27/49] staging: rtl8712: uninitialized memory in read_bbreg_hdl() Greg Kroah-Hartman
2019-05-02 15:21 ` [PATCH 4.14 28/49] staging: rtlwifi: Fix potential NULL pointer dereference of kzalloc Greg Kroah-Hartman
2019-05-02 15:21 ` [PATCH 4.14 29/49] net: macb: Add null check for PCLK and HCLK Greg Kroah-Hartman
2019-05-02 15:21 ` [PATCH 4.14 30/49] net/sched: dont dereference a->goto_chain to read the chain index Greg Kroah-Hartman
2019-05-02 15:21 ` [PATCH 4.14 31/49] ARM: dts: imx6qdl: Fix typo in imx6qdl-icore-rqs.dtsi Greg Kroah-Hartman
2019-05-02 15:21 ` [PATCH 4.14 32/49] NFS: Fix a typo in nfs_init_timeout_values() Greg Kroah-Hartman
2019-05-02 15:21 ` [PATCH 4.14 33/49] net: xilinx: fix possible object reference leak Greg Kroah-Hartman
2019-05-02 15:21 ` [PATCH 4.14 34/49] net: ibm: " Greg Kroah-Hartman
2019-05-02 15:21 ` [PATCH 4.14 35/49] net: ethernet: ti: " Greg Kroah-Hartman
2019-05-02 15:21 ` [PATCH 4.14 36/49] gpio: aspeed: fix a potential NULL pointer dereference Greg Kroah-Hartman
2019-05-02 15:21 ` [PATCH 4.14 37/49] drm/meson: Fix invalid pointer in meson_drv_unbind() Greg Kroah-Hartman
2019-05-02 15:21 ` [PATCH 4.14 38/49] drm/meson: Uninstall IRQ handler Greg Kroah-Hartman
2019-05-02 15:21 ` [PATCH 4.14 39/49] scsi: qla4xxx: fix a potential NULL pointer dereference Greg Kroah-Hartman
2019-05-02 15:21 ` [PATCH 4.14 40/49] usb: usb251xb: fix to avoid " Greg Kroah-Hartman
2019-05-02 15:21 ` [PATCH 4.14 41/49] usb: u132-hcd: fix resource leak Greg Kroah-Hartman
2019-05-02 15:21 ` [PATCH 4.14 42/49] ceph: fix use-after-free on symlink traversal Greg Kroah-Hartman
2019-05-02 15:21 ` [PATCH 4.14 43/49] scsi: zfcp: reduce flood of fcrscn1 trace records on multi-element RSCN Greg Kroah-Hartman
2019-05-02 15:21 ` [PATCH 4.14 44/49] libata: fix using DMA buffers on stack Greg Kroah-Hartman
2019-05-02 15:21 ` [PATCH 4.14 45/49] gpio: of: Fix of_gpiochip_add() error path Greg Kroah-Hartman
2019-05-02 15:21 ` [PATCH 4.14 46/49] kconfig/[mn]conf: handle backspace (^H) key Greg Kroah-Hartman
2019-05-02 15:21 ` [PATCH 4.14 47/49] iommu/amd: Reserve exclusion range in iova-domain Greg Kroah-Hartman
2019-05-02 15:21 ` [PATCH 4.14 48/49] ptrace: take into account saved_sigmask in PTRACE{GET,SET}SIGMASK Greg Kroah-Hartman
2019-05-02 15:21 ` [PATCH 4.14 49/49] leds: pca9532: fix a potential NULL pointer dereference Greg Kroah-Hartman
2019-05-03  0:06 ` [PATCH 4.14 00/49] 4.14.116-stable review kernelci.org bot
2019-05-03  6:55 ` Naresh Kamboju
2019-05-03  9:27 ` Jon Hunter
2019-05-03 17:15 ` Guenter Roeck
2019-05-03 21:20 ` shuah

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190502143326.834120750@linuxfoundation.org \
    --to=gregkh@linuxfoundation.org \
    --cc=Tristram.Ha@microchip.com \
    --cc=ben.dooks@codethink.co.uk \
    --cc=davem@davemloft.net \
    --cc=f.pavlic@kunbus.de \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lukas@wunner.de \
    --cc=sashal@kernel.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).