[PATCH 5.1 30/46] aqc111: fix writing to the phy on BE

[Greg Kroah-Hartman <gregkh@linuxfoundation.org>]

From: Oliver Neukum <oneukum@suse.com>

[ Upstream commit 369b46e9fbcfa5136f2cb5f486c90e5f7fa92630 ]

When writing to the phy on BE architectures an internal data structure
was directly given, leading to it being byte swapped in the wrong
way for the CPU in 50% of all cases. A temporary buffer must be used.

Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/usb/aqc111.c |   23 +++++++++++++++++------
 1 file changed, 17 insertions(+), 6 deletions(-)

--- a/drivers/net/usb/aqc111.c
+++ b/drivers/net/usb/aqc111.c
@@ -320,6 +320,7 @@ static int aqc111_get_link_ksettings(str
 static void aqc111_set_phy_speed(struct usbnet *dev, u8 autoneg, u16 speed)
 {
 	struct aqc111_data *aqc111_data = dev->driver_priv;
+	u32 phy_on_the_wire;
 
 	aqc111_data->phy_cfg &= ~AQ_ADV_MASK;
 	aqc111_data->phy_cfg |= AQ_PAUSE;
@@ -361,7 +362,8 @@ static void aqc111_set_phy_speed(struct
 		}
 	}
 
-	aqc111_write32_cmd(dev, AQ_PHY_OPS, 0, 0, &aqc111_data->phy_cfg);
+	phy_on_the_wire = aqc111_data->phy_cfg;
+	aqc111_write32_cmd(dev, AQ_PHY_OPS, 0, 0, &phy_on_the_wire);
 }
 
 static int aqc111_set_link_ksettings(struct net_device *net,
@@ -755,6 +757,7 @@ static void aqc111_unbind(struct usbnet
 {
 	struct aqc111_data *aqc111_data = dev->driver_priv;
 	u16 reg16;
+	u32 phy_on_the_wire;
 
 	/* Force bz */
 	reg16 = SFR_PHYPWR_RSTCTL_BZ;
@@ -768,8 +771,9 @@ static void aqc111_unbind(struct usbnet
 	aqc111_data->phy_cfg &= ~AQ_ADV_MASK;
 	aqc111_data->phy_cfg |= AQ_LOW_POWER;
 	aqc111_data->phy_cfg &= ~AQ_PHY_POWER_EN;
+	phy_on_the_wire = aqc111_data->phy_cfg;
 	aqc111_write32_cmd_nopm(dev, AQ_PHY_OPS, 0, 0,
-				&aqc111_data->phy_cfg);
+				&phy_on_the_wire);
 
 	kfree(aqc111_data);
 }
@@ -992,6 +996,7 @@ static int aqc111_reset(struct usbnet *d
 {
 	struct aqc111_data *aqc111_data = dev->driver_priv;
 	u8 reg8 = 0;
+	u32 phy_on_the_wire;
 
 	dev->rx_urb_size = URB_SIZE;
 
@@ -1004,8 +1009,9 @@ static int aqc111_reset(struct usbnet *d
 
 	/* Power up ethernet PHY */
 	aqc111_data->phy_cfg = AQ_PHY_POWER_EN;
+	phy_on_the_wire = aqc111_data->phy_cfg;
 	aqc111_write32_cmd(dev, AQ_PHY_OPS, 0, 0,
-			   &aqc111_data->phy_cfg);
+			   &phy_on_the_wire);
 
 	/* Set the MAC address */
 	aqc111_write_cmd(dev, AQ_ACCESS_MAC, SFR_NODE_ID, ETH_ALEN,
@@ -1036,6 +1042,7 @@ static int aqc111_stop(struct usbnet *de
 {
 	struct aqc111_data *aqc111_data = dev->driver_priv;
 	u16 reg16 = 0;
+	u32 phy_on_the_wire;
 
 	aqc111_read16_cmd(dev, AQ_ACCESS_MAC, SFR_MEDIUM_STATUS_MODE,
 			  2, &reg16);
@@ -1047,8 +1054,9 @@ static int aqc111_stop(struct usbnet *de
 
 	/* Put PHY to low power*/
 	aqc111_data->phy_cfg |= AQ_LOW_POWER;
+	phy_on_the_wire = aqc111_data->phy_cfg;
 	aqc111_write32_cmd(dev, AQ_PHY_OPS, 0, 0,
-			   &aqc111_data->phy_cfg);
+			   &phy_on_the_wire);
 
 	netif_carrier_off(dev->net);
 
@@ -1324,6 +1332,7 @@ static int aqc111_suspend(struct usb_int
 	u16 temp_rx_ctrl = 0x00;
 	u16 reg16;
 	u8 reg8;
+	u32 phy_on_the_wire;
 
 	usbnet_suspend(intf, message);
 
@@ -1395,12 +1404,14 @@ static int aqc111_suspend(struct usb_int
 
 		aqc111_write_cmd(dev, AQ_WOL_CFG, 0, 0,
 				 WOL_CFG_SIZE, &wol_cfg);
+		phy_on_the_wire = aqc111_data->phy_cfg;
 		aqc111_write32_cmd(dev, AQ_PHY_OPS, 0, 0,
-				   &aqc111_data->phy_cfg);
+				   &phy_on_the_wire);
 	} else {
 		aqc111_data->phy_cfg |= AQ_LOW_POWER;
+		phy_on_the_wire = aqc111_data->phy_cfg;
 		aqc111_write32_cmd(dev, AQ_PHY_OPS, 0, 0,
-				   &aqc111_data->phy_cfg);
+				   &phy_on_the_wire);
 
 		/* Disable RX path */
 		aqc111_read16_cmd_nopm(dev, AQ_ACCESS_MAC,