From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
stable@vger.kernel.org, Michael Chan <michael.chan@broadcom.com>,
"David S. Miller" <davem@davemloft.net>
Subject: [PATCH 5.0 27/36] bnxt_en: Fix possible BUG() condition when calling pci_disable_msix().
Date: Mon, 3 Jun 2019 11:09:15 +0200 [thread overview]
Message-ID: <20190603090522.776280971@linuxfoundation.org> (raw)
In-Reply-To: <20190603090520.998342694@linuxfoundation.org>
From: Michael Chan <michael.chan@broadcom.com>
[ Upstream commit 1b3f0b75c39f534278a895c117282014e9d0ae1f ]
When making configuration changes, the driver calls bnxt_close_nic()
and then bnxt_open_nic() for the changes to take effect. A parameter
irq_re_init is passed to the call sequence to indicate if IRQ
should be re-initialized. This irq_re_init parameter needs to
be included in the bnxt_reserve_rings() call. bnxt_reserve_rings()
can only call pci_disable_msix() if the irq_re_init parameter is
true, otherwise it may hit BUG() because some IRQs may not have been
freed yet.
Fixes: 41e8d7983752 ("bnxt_en: Modify the ring reservation functions for 57500 series chips.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/ethernet/broadcom/bnxt/bnxt.c | 13 +++++++------
drivers/net/ethernet/broadcom/bnxt/bnxt.h | 2 +-
drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c | 2 +-
drivers/net/ethernet/broadcom/bnxt/bnxt_ulp.c | 2 +-
4 files changed, 10 insertions(+), 9 deletions(-)
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -7506,22 +7506,23 @@ static void bnxt_clear_int_mode(struct b
bp->flags &= ~BNXT_FLAG_USING_MSIX;
}
-int bnxt_reserve_rings(struct bnxt *bp)
+int bnxt_reserve_rings(struct bnxt *bp, bool irq_re_init)
{
int tcs = netdev_get_num_tc(bp->dev);
- bool reinit_irq = false;
+ bool irq_cleared = false;
int rc;
if (!bnxt_need_reserve_rings(bp))
return 0;
- if (BNXT_NEW_RM(bp) && (bnxt_get_num_msix(bp) != bp->total_irqs)) {
+ if (irq_re_init && BNXT_NEW_RM(bp) &&
+ bnxt_get_num_msix(bp) != bp->total_irqs) {
bnxt_ulp_irq_stop(bp);
bnxt_clear_int_mode(bp);
- reinit_irq = true;
+ irq_cleared = true;
}
rc = __bnxt_reserve_rings(bp);
- if (reinit_irq) {
+ if (irq_cleared) {
if (!rc)
rc = bnxt_init_int_mode(bp);
bnxt_ulp_irq_restart(bp, rc);
@@ -8420,7 +8421,7 @@ static int __bnxt_open_nic(struct bnxt *
return rc;
}
}
- rc = bnxt_reserve_rings(bp);
+ rc = bnxt_reserve_rings(bp, irq_re_init);
if (rc)
return rc;
if ((bp->flags & BNXT_FLAG_RFS) &&
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.h
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.h
@@ -1776,7 +1776,7 @@ unsigned int bnxt_get_avail_stat_ctxs_fo
unsigned int bnxt_get_max_func_cp_rings(struct bnxt *bp);
unsigned int bnxt_get_avail_cp_rings_for_en(struct bnxt *bp);
int bnxt_get_avail_msix(struct bnxt *bp, int num);
-int bnxt_reserve_rings(struct bnxt *bp);
+int bnxt_reserve_rings(struct bnxt *bp, bool irq_re_init);
void bnxt_tx_disable(struct bnxt *bp);
void bnxt_tx_enable(struct bnxt *bp);
int bnxt_hwrm_set_pause(struct bnxt *);
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
@@ -788,7 +788,7 @@ static int bnxt_set_channels(struct net_
*/
}
} else {
- rc = bnxt_reserve_rings(bp);
+ rc = bnxt_reserve_rings(bp, true);
}
return rc;
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_ulp.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_ulp.c
@@ -150,7 +150,7 @@ static int bnxt_req_msix_vecs(struct bnx
bnxt_close_nic(bp, true, false);
rc = bnxt_open_nic(bp, true, false);
} else {
- rc = bnxt_reserve_rings(bp);
+ rc = bnxt_reserve_rings(bp, true);
}
}
if (rc) {
next prev parent reply other threads:[~2019-06-03 9:12 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-03 9:08 [PATCH 5.0 00/36] 5.0.21-stable review Greg Kroah-Hartman
2019-06-03 9:08 ` [PATCH 5.0 01/36] bonding/802.3ad: fix slave link initialization transition states Greg Kroah-Hartman
2019-06-03 9:08 ` [PATCH 5.0 02/36] cxgb4: offload VLAN flows regardless of VLAN ethtype Greg Kroah-Hartman
2019-06-03 9:08 ` [PATCH 5.0 03/36] inet: switch IP ID generator to siphash Greg Kroah-Hartman
2019-06-03 9:08 ` [PATCH 5.0 04/36] ipv4/igmp: fix another memory leak in igmpv3_del_delrec() Greg Kroah-Hartman
2019-06-03 9:08 ` [PATCH 5.0 05/36] ipv4/igmp: fix build error if !CONFIG_IP_MULTICAST Greg Kroah-Hartman
2019-06-03 9:08 ` [PATCH 5.0 06/36] ipv6: Consider sk_bound_dev_if when binding a raw socket to an address Greg Kroah-Hartman
2019-06-03 9:08 ` [PATCH 5.0 07/36] ipv6: Fix redirect with VRF Greg Kroah-Hartman
2019-06-03 9:08 ` [PATCH 5.0 08/36] llc: fix skb leak in llc_build_and_send_ui_pkt() Greg Kroah-Hartman
2019-06-03 9:08 ` [PATCH 5.0 09/36] mlxsw: spectrum_acl: Avoid warning after identical rules insertion Greg Kroah-Hartman
2019-06-03 9:08 ` [PATCH 5.0 10/36] net: dsa: mv88e6xxx: fix handling of upper half of STATS_TYPE_PORT Greg Kroah-Hartman
2019-06-03 9:08 ` [PATCH 5.0 11/36] net: fec: fix the clk mismatch in failed_reset path Greg Kroah-Hartman
2019-06-03 9:09 ` [PATCH 5.0 12/36] net-gro: fix use-after-free read in napi_gro_frags() Greg Kroah-Hartman
2019-06-03 9:09 ` [PATCH 5.0 13/36] net: mvneta: Fix err code path of probe Greg Kroah-Hartman
2019-06-03 9:09 ` [PATCH 5.0 14/36] net: mvpp2: fix bad MVPP2_TXQ_SCHED_TOKEN_CNTR_REG queue value Greg Kroah-Hartman
2019-06-03 9:09 ` [PATCH 5.0 15/36] net: phy: marvell10g: report if the PHY fails to boot firmware Greg Kroah-Hartman
2019-06-03 9:09 ` [PATCH 5.0 16/36] net: sched: dont use tc_action->order during action dump Greg Kroah-Hartman
2019-06-03 9:09 ` [PATCH 5.0 17/36] net: stmmac: fix reset gpio free missing Greg Kroah-Hartman
2019-06-03 9:09 ` [PATCH 5.0 18/36] r8169: fix MAC address being lost in PCI D3 Greg Kroah-Hartman
2019-06-03 9:09 ` [PATCH 5.0 19/36] usbnet: fix kernel crash after disconnect Greg Kroah-Hartman
2019-06-03 9:09 ` [PATCH 5.0 20/36] net/mlx5: Avoid double free in fs init error unwinding path Greg Kroah-Hartman
2019-06-03 9:09 ` [PATCH 5.0 21/36] tipc: Avoid copying bytes beyond the supplied data Greg Kroah-Hartman
2019-06-03 9:09 ` [PATCH 5.0 22/36] net/mlx5: Allocate root ns memory using kzalloc to match kfree Greg Kroah-Hartman
2019-06-03 9:09 ` [PATCH 5.0 23/36] net/mlx5e: Disable rxhash when CQE compress is enabled Greg Kroah-Hartman
2019-06-03 9:09 ` [PATCH 5.0 25/36] net: stmmac: dma channel control register need to be init first Greg Kroah-Hartman
2019-06-03 9:09 ` [PATCH 5.0 26/36] bnxt_en: Fix aggregation buffer leak under OOM condition Greg Kroah-Hartman
2019-06-03 9:09 ` Greg Kroah-Hartman [this message]
2019-06-03 9:09 ` [PATCH 5.0 28/36] bnxt_en: Reduce memory usage when running in kdump kernel Greg Kroah-Hartman
2019-06-03 9:09 ` [PATCH 5.0 29/36] net/tls: fix state removal with feature flags off Greg Kroah-Hartman
2019-06-03 9:09 ` [PATCH 5.0 30/36] net/tls: dont ignore netdev notifications if no TLS features Greg Kroah-Hartman
2019-06-03 9:09 ` [PATCH 5.0 31/36] cxgb4: Revert "cxgb4: Remove SGE_HOST_PAGE_SIZE dependency on page size" Greg Kroah-Hartman
2019-06-03 9:09 ` [PATCH 5.0 32/36] net: correct zerocopy refcnt with udp MSG_MORE Greg Kroah-Hartman
2019-06-03 9:09 ` [PATCH 5.0 33/36] crypto: vmx - ghash: do nosimd fallback manually Greg Kroah-Hartman
2019-06-03 9:09 ` [PATCH 5.0 34/36] xen/pciback: Dont disable PCI_COMMAND on PCI device reset Greg Kroah-Hartman
2019-06-03 9:09 ` [PATCH 5.0 35/36] Revert "tipc: fix modprobe tipc failed after switch order of device registration" Greg Kroah-Hartman
2019-06-03 9:09 ` [PATCH 5.0 36/36] tipc: fix modprobe tipc failed after switch order of device registration Greg Kroah-Hartman
2019-06-03 15:09 ` [PATCH 5.0 00/36] 5.0.21-stable review kernelci.org bot
2019-06-03 17:17 ` Guenter Roeck
2019-06-03 17:59 ` Naresh Kamboju
2019-06-03 18:33 ` Jon Hunter
2019-06-03 23:32 ` shuah
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190603090522.776280971@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=davem@davemloft.net \
--cc=linux-kernel@vger.kernel.org \
--cc=michael.chan@broadcom.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).