[PATCH 4.14 00/45] 4.14.129-stable review

[PATCH 4.14 00/45] 4.14.129-stable review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 4.14.129 release.
There are 45 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Sat 22 Jun 2019 05:42:15 PM UTC.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.129-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 4.14.129-rc1

Alexander Lochmann <alexander.lochmann@tu-dortmund.de>
    Abort file_remove_privs() for non-reg. files

Ajay Kaher <akaher@vmware.com>
    infiniband: fix race condition between infiniband mlx4, mlx5 driver and core dumping

Andrea Arcangeli <aarcange@redhat.com>
    coredump: fix race condition between collapse_huge_page() and core dumping

Jason Gerecke <jason.gerecke@wacom.com>
    HID: wacom: Send BTN_TOUCH in response to INTUOSP2_BT eraser contact

Jason Gerecke <jason.gerecke@wacom.com>
    HID: wacom: Don't report anything prior to the tool entering range

Jason Gerecke <jason.gerecke@wacom.com>
    HID: wacom: Don't set tool type until we're in range

Amit Cohen <amitc@mellanox.com>
    mlxsw: spectrum: Prevent force of 56G

Jason Yan <yanaijie@huawei.com>
    scsi: libsas: delete sas port if expander discover failed

YueHaibing <yuehaibing@huawei.com>
    scsi: scsi_dh_alua: Fix possible null-ptr-deref

Lianbo Jiang <lijiang@redhat.com>
    scsi: smartpqi: properly set both the DMA mask and the coherent DMA mask

Varun Prakash <varun@chelsio.com>
    scsi: libcxgbi: add a check for NULL pointer in cxgbi_check_route()

Max Uvarov <muvarov@gmail.com>
    net: phy: dp83867: Set up RGMII TX delay

Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
    net: sh_eth: fix mdio access in sh_eth_close() for R-Car Gen2 and RZ/A1 SoCs

Paul Mackerras <paulus@ozlabs.org>
    KVM: PPC: Book3S HV: Don't take kvm->lock around kvm_for_each_vcpu

Paul Mackerras <paulus@ozlabs.org>
    KVM: PPC: Book3S: Use new mutex to synchronize access to rtas token list

Randy Dunlap <rdunlap@infradead.org>
    ia64: fix build errors by exporting paddr_to_nid()

Thomas Richter <tmricht@linux.ibm.com>
    perf record: Fix s390 missing module symbol and warning for non-root users

Shawn Landden <shawn@git.icu>
    perf data: Fix 'strncat may truncate' build failure with recent gcc

Sahitya Tummala <stummala@codeaurora.org>
    configfs: Fix use-after-free when accessing sd->s_dentry

Bard Liao <yung-chuan.liao@linux.intel.com>
    ALSA: hda - Force polling mode on CNL for fixing codec communication

Yingjoe Chen <yingjoe.chen@mediatek.com>
    i2c: dev: fix potential memory leak in i2cdev_ioctl_rdwr

Dmitry Bogdanov <dmitry.bogdanov@aquantia.com>
    net: aquantia: fix LRO with FCS error

Kees Cook <keescook@chromium.org>
    net: tulip: de4x5: Drop redundant MODULE_DEVICE_TABLE()

Randy Dunlap <rdunlap@infradead.org>
    gpio: fix gpio-adp5588 build errors

Peter Zijlstra <peterz@infradead.org>
    perf/ring-buffer: Always use {READ,WRITE}_ONCE() for rb->user_page data

Peter Zijlstra <peterz@infradead.org>
    perf/ring_buffer: Add ordering to rb->nest increment

Yabin Cui <yabinc@google.com>
    perf/ring_buffer: Fix exposing a temporarily decreased data_head

Frank van der Linden <fllinden@amazon.com>
    x86/CPU/AMD: Don't force the CPB cap when running under a hypervisor

Dan Carpenter <dan.carpenter@oracle.com>
    mISDN: make sure device name is NUL terminated

Anju T Sudhakar <anju@linux.vnet.ibm.com>
    powerpc/powernv: Return for invalid IMC domain

Tony Lindgren <tony@atomide.com>
    clk: ti: clkctrl: Fix clkdm_clk handling

Jeffrin Jose T <jeffrin@rajagiritech.edu.in>
    selftests: netfilter: missing error check when setting up veth interface

YueHaibing <yuehaibing@huawei.com>
    ipvs: Fix use-after-free in ip_vs_in

Jagdish Motwani <jagdish.motwani@sophos.com>
    netfilter: nf_queue: fix reinject verdict handling

Stephane Eranian <eranian@google.com>
    perf/x86/intel/ds: Fix EVENT vs. UEVENT PEBS constraints

Dan Carpenter <dan.carpenter@oracle.com>
    Staging: vc04_services: Fix a couple error codes

John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
    sunhv: Fix device naming inconsistency between sunhv_console and sunhv_reg

Neil Horman <nhorman@tuxdriver.com>
    sctp: Free cookie before we memdup a new one

Taehee Yoo <ap420073@gmail.com>
    net: openvswitch: do not free vport if register_netdevice() is failed.

Eric Dumazet <edumazet@google.com>
    neigh: fix use-after-free read in pneigh_get_next

Jeremy Sowden <jeremy@azazel.net>
    lapb: fixed leak of control-blocks.

Eric Dumazet <edumazet@google.com>
    ipv6: flowlabel: fl6_sock_lookup() must use atomic_inc_not_zero

Ivan Vecera <ivecera@redhat.com>
    be2net: Fix number of Rx queues used for flow hashing

Eric Dumazet <edumazet@google.com>
    ax25: fix inconsistent lock state in ax25_destroy_timer

Arnaldo Carvalho de Melo <acme@redhat.com>
    perf machine: Guard against NULL in machine__exit()


-------------

Diffstat:

 Makefile                                           |  4 +-
 arch/ia64/mm/numa.c                                |  1 +
 arch/powerpc/include/asm/kvm_host.h                |  1 +
 arch/powerpc/kvm/book3s.c                          |  1 +
 arch/powerpc/kvm/book3s_hv.c                       |  9 +---
 arch/powerpc/kvm/book3s_rtas.c                     | 14 +++--
 arch/powerpc/platforms/powernv/opal-imc.c          |  4 ++
 arch/x86/events/intel/ds.c                         | 28 +++++-----
 arch/x86/kernel/cpu/amd.c                          |  7 ++-
 drivers/clk/ti/clkctrl.c                           |  8 +--
 drivers/gpio/Kconfig                               |  1 +
 drivers/hid/wacom_wac.c                            | 41 ++++++++++-----
 drivers/i2c/i2c-dev.c                              |  1 +
 drivers/infiniband/hw/mlx4/main.c                  |  4 +-
 drivers/infiniband/hw/mlx5/main.c                  |  3 ++
 drivers/isdn/mISDN/socket.c                        |  5 +-
 .../ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c  | 61 ++++++++++++----------
 drivers/net/ethernet/dec/tulip/de4x5.c             |  1 -
 drivers/net/ethernet/emulex/benet/be_ethtool.c     |  2 +-
 drivers/net/ethernet/mellanox/mlxsw/spectrum.c     |  4 ++
 drivers/net/ethernet/renesas/sh_eth.c              |  4 ++
 drivers/net/phy/dp83867.c                          |  4 +-
 drivers/scsi/cxgbi/libcxgbi.c                      |  4 ++
 drivers/scsi/device_handler/scsi_dh_alua.c         |  6 +--
 drivers/scsi/libsas/sas_expander.c                 |  2 +
 drivers/scsi/smartpqi/smartpqi_init.c              |  2 +-
 .../vc04_services/bcm2835-camera/controls.c        |  4 +-
 drivers/tty/serial/sunhv.c                         |  2 +-
 fs/configfs/dir.c                                  | 14 +++--
 fs/inode.c                                         |  9 +++-
 include/linux/sched/mm.h                           |  4 ++
 kernel/events/ring_buffer.c                        | 39 +++++++++++---
 mm/khugepaged.c                                    |  3 ++
 net/ax25/ax25_route.c                              |  2 +
 net/core/neighbour.c                               |  7 +++
 net/ipv6/ip6_flowlabel.c                           |  7 +--
 net/lapb/lapb_iface.c                              |  1 +
 net/netfilter/ipvs/ip_vs_core.c                    |  2 +-
 net/netfilter/nf_queue.c                           |  1 +
 net/openvswitch/vport-internal_dev.c               | 18 ++++---
 net/sctp/sm_make_chunk.c                           |  8 +++
 sound/pci/hda/hda_intel.c                          |  5 +-
 tools/perf/arch/s390/util/machine.c                |  9 ++--
 tools/perf/util/data-convert-bt.c                  |  2 +-
 tools/perf/util/machine.c                          |  3 ++
 tools/testing/selftests/netfilter/nft_nat.sh       |  6 ++-
 46 files changed, 239 insertions(+), 129 deletions(-)

[PATCH 4.14 01/45] perf machine: Guard against NULL in machine__exit()

[Greg Kroah-Hartman]

From: Arnaldo Carvalho de Melo <acme@redhat.com>

commit 4a2233b194c77ae1ea8304cb7c00b551de4313f0 upstream.

A recent fix for 'perf trace' introduced a bug where
machine__exit(trace->host) could be called while trace->host was still
NULL, so make this more robust by guarding against NULL, just like
free() does.

The problem happens, for instance, when !root users try to run 'perf
trace':

  [acme@jouet linux]$ trace
  Error:	No permissions to read /sys/kernel/debug/tracing/events/raw_syscalls/sys_(enter|exit)
  Hint:	Try 'sudo mount -o remount,mode=755 /sys/kernel/debug/tracing'

  perf: Segmentation fault
  Obtained 7 stack frames.
  [0x4f1b2e]
  /lib64/libc.so.6(+0x3671f) [0x7f43a1dd971f]
  [0x4f3fec]
  [0x47468b]
  [0x42a2db]
  /lib64/libc.so.6(__libc_start_main+0xe9) [0x7f43a1dc3509]
  [0x42a6c9]
  Segmentation fault (core dumped)
  [acme@jouet linux]$

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrei Vagin <avagin@openvz.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vasily Averin <vvs@virtuozzo.com>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 33974a414ce2 ("perf trace: Call machine__exit() at exit")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Tommi Rantala <tommi.t.rantala@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 tools/perf/util/machine.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/tools/perf/util/machine.c
+++ b/tools/perf/util/machine.c
@@ -156,6 +156,9 @@ void machine__delete_threads(struct mach
 
 void machine__exit(struct machine *machine)
 {
+	if (machine == NULL)
+		return;
+
 	machine__destroy_kernel_maps(machine);
 	map_groups__exit(&machine->kmaps);
 	dsos__exit(&machine->dsos);

[PATCH 4.14 02/45] ax25: fix inconsistent lock state in ax25_destroy_timer

[Greg Kroah-Hartman]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit d4d5d8e83c9616aeef28a2869cea49cc3fb35526 ]

Before thread in process context uses bh_lock_sock()
we must disable bh.

sysbot reported :

WARNING: inconsistent lock state
5.2.0-rc3+ #32 Not tainted

inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
blkid/26581 [HC0[0]:SC1[1]:HE1:SE0] takes:
00000000e0da85ee (slock-AF_AX25){+.?.}, at: spin_lock include/linux/spinlock.h:338 [inline]
00000000e0da85ee (slock-AF_AX25){+.?.}, at: ax25_destroy_timer+0x53/0xc0 net/ax25/af_ax25.c:275
{SOFTIRQ-ON-W} state was registered at:
  lock_acquire+0x16f/0x3f0 kernel/locking/lockdep.c:4303
  __raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline]
  _raw_spin_lock+0x2f/0x40 kernel/locking/spinlock.c:151
  spin_lock include/linux/spinlock.h:338 [inline]
  ax25_rt_autobind+0x3ca/0x720 net/ax25/ax25_route.c:429
  ax25_connect.cold+0x30/0xa4 net/ax25/af_ax25.c:1221
  __sys_connect+0x264/0x330 net/socket.c:1834
  __do_sys_connect net/socket.c:1845 [inline]
  __se_sys_connect net/socket.c:1842 [inline]
  __x64_sys_connect+0x73/0xb0 net/socket.c:1842
  do_syscall_64+0xfd/0x680 arch/x86/entry/common.c:301
  entry_SYSCALL_64_after_hwframe+0x49/0xbe
irq event stamp: 2272
hardirqs last  enabled at (2272): [<ffffffff810065f3>] trace_hardirqs_on_thunk+0x1a/0x1c
hardirqs last disabled at (2271): [<ffffffff8100660f>] trace_hardirqs_off_thunk+0x1a/0x1c
softirqs last  enabled at (1522): [<ffffffff87400654>] __do_softirq+0x654/0x94c kernel/softirq.c:320
softirqs last disabled at (2267): [<ffffffff81449010>] invoke_softirq kernel/softirq.c:374 [inline]
softirqs last disabled at (2267): [<ffffffff81449010>] irq_exit+0x180/0x1d0 kernel/softirq.c:414

other info that might help us debug this:
 Possible unsafe locking scenario:

       CPU0
       ----
  lock(slock-AF_AX25);
  <Interrupt>
    lock(slock-AF_AX25);

 *** DEADLOCK ***

1 lock held by blkid/26581:
 #0: 0000000010fd154d ((&ax25->dtimer)){+.-.}, at: lockdep_copy_map include/linux/lockdep.h:175 [inline]
 #0: 0000000010fd154d ((&ax25->dtimer)){+.-.}, at: call_timer_fn+0xe0/0x720 kernel/time/timer.c:1312

stack backtrace:
CPU: 1 PID: 26581 Comm: blkid Not tainted 5.2.0-rc3+ #32
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 <IRQ>
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x172/0x1f0 lib/dump_stack.c:113
 print_usage_bug.cold+0x393/0x4a2 kernel/locking/lockdep.c:2935
 valid_state kernel/locking/lockdep.c:2948 [inline]
 mark_lock_irq kernel/locking/lockdep.c:3138 [inline]
 mark_lock+0xd46/0x1370 kernel/locking/lockdep.c:3513
 mark_irqflags kernel/locking/lockdep.c:3391 [inline]
 __lock_acquire+0x159f/0x5490 kernel/locking/lockdep.c:3745
 lock_acquire+0x16f/0x3f0 kernel/locking/lockdep.c:4303
 __raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline]
 _raw_spin_lock+0x2f/0x40 kernel/locking/spinlock.c:151
 spin_lock include/linux/spinlock.h:338 [inline]
 ax25_destroy_timer+0x53/0xc0 net/ax25/af_ax25.c:275
 call_timer_fn+0x193/0x720 kernel/time/timer.c:1322
 expire_timers kernel/time/timer.c:1366 [inline]
 __run_timers kernel/time/timer.c:1685 [inline]
 __run_timers kernel/time/timer.c:1653 [inline]
 run_timer_softirq+0x66f/0x1740 kernel/time/timer.c:1698
 __do_softirq+0x25c/0x94c kernel/softirq.c:293
 invoke_softirq kernel/softirq.c:374 [inline]
 irq_exit+0x180/0x1d0 kernel/softirq.c:414
 exiting_irq arch/x86/include/asm/apic.h:536 [inline]
 smp_apic_timer_interrupt+0x13b/0x550 arch/x86/kernel/apic/apic.c:1068
 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:806
 </IRQ>
RIP: 0033:0x7f858d5c3232
Code: 8b 61 08 48 8b 84 24 d8 00 00 00 4c 89 44 24 28 48 8b ac 24 d0 00 00 00 4c 8b b4 24 e8 00 00 00 48 89 7c 24 68 48 89 4c 24 78 <48> 89 44 24 58 8b 84 24 e0 00 00 00 89 84 24 84 00 00 00 8b 84 24
RSP: 002b:00007ffcaf0cf5c0 EFLAGS: 00000206 ORIG_RAX: ffffffffffffff13
RAX: 00007f858d7d27a8 RBX: 00007f858d7d8820 RCX: 00007f858d3940d8
RDX: 00007ffcaf0cf798 RSI: 00000000f5e616f3 RDI: 00007f858d394fee
RBP: 0000000000000000 R08: 00007ffcaf0cf780 R09: 00007f858d7db480
R10: 0000000000000000 R11: 0000000009691a75 R12: 0000000000000005
R13: 00000000f5e616f3 R14: 0000000000000000 R15: 00007ffcaf0cf798

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ax25/ax25_route.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/net/ax25/ax25_route.c
+++ b/net/ax25/ax25_route.c
@@ -443,9 +443,11 @@ int ax25_rt_autobind(ax25_cb *ax25, ax25
 	}
 
 	if (ax25->sk != NULL) {
+		local_bh_disable();
 		bh_lock_sock(ax25->sk);
 		sock_reset_flag(ax25->sk, SOCK_ZAPPED);
 		bh_unlock_sock(ax25->sk);
+		local_bh_enable();
 	}
 
 put:

[PATCH 4.14 03/45] be2net: Fix number of Rx queues used for flow hashing

[Greg Kroah-Hartman]

From: Ivan Vecera <ivecera@redhat.com>

[ Upstream commit 718f4a2537089ea41903bf357071306163bc7c04 ]

Number of Rx queues used for flow hashing returned by the driver is
incorrect and this bug prevents user to use the last Rx queue in
indirection table.

Let's say we have a NIC with 6 combined queues:

[root@sm-03 ~]# ethtool -l enp4s0f0
Channel parameters for enp4s0f0:
Pre-set maximums:
RX:             5
TX:             5
Other:          0
Combined:       6
Current hardware settings:
RX:             0
TX:             0
Other:          0
Combined:       6

Default indirection table maps all (6) queues equally but the driver
reports only 5 rings available.

[root@sm-03 ~]# ethtool -x enp4s0f0
RX flow hash indirection table for enp4s0f0 with 5 RX ring(s):
    0:      0     1     2     3     4     5     0     1
    8:      2     3     4     5     0     1     2     3
   16:      4     5     0     1     2     3     4     5
   24:      0     1     2     3     4     5     0     1
...

Now change indirection table somehow:

[root@sm-03 ~]# ethtool -X enp4s0f0 weight 1 1
[root@sm-03 ~]# ethtool -x enp4s0f0
RX flow hash indirection table for enp4s0f0 with 6 RX ring(s):
    0:      0     0     0     0     0     0     0     0
...
   64:      1     1     1     1     1     1     1     1
...

Now it is not possible to change mapping back to equal (default) state:

[root@sm-03 ~]# ethtool -X enp4s0f0 equal 6
Cannot set RX flow hash configuration: Invalid argument

Fixes: 594ad54a2c3b ("be2net: Add support for setting and getting rx flow hash options")
Reported-by: Tianhao <tizhao@redhat.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/emulex/benet/be_ethtool.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/ethernet/emulex/benet/be_ethtool.c
+++ b/drivers/net/ethernet/emulex/benet/be_ethtool.c
@@ -1103,7 +1103,7 @@ static int be_get_rxnfc(struct net_devic
 		cmd->data = be_get_rss_hash_opts(adapter, cmd->flow_type);
 		break;
 	case ETHTOOL_GRXRINGS:
-		cmd->data = adapter->num_rx_qs - 1;
+		cmd->data = adapter->num_rx_qs;
 		break;
 	default:
 		return -EINVAL;

[PATCH 4.14 04/45] ipv6: flowlabel: fl6_sock_lookup() must use atomic_inc_not_zero

[Greg Kroah-Hartman]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 65a3c497c0e965a552008db8bc2653f62bc925a1 ]

Before taking a refcount, make sure the object is not already
scheduled for deletion.

Same fix is needed in ipv6_flowlabel_opt()

Fixes: 18367681a10b ("ipv6 flowlabel: Convert np->ipv6_fl_list to RCU.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv6/ip6_flowlabel.c |    7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

--- a/net/ipv6/ip6_flowlabel.c
+++ b/net/ipv6/ip6_flowlabel.c
@@ -254,9 +254,9 @@ struct ip6_flowlabel *fl6_sock_lookup(st
 	rcu_read_lock_bh();
 	for_each_sk_fl_rcu(np, sfl) {
 		struct ip6_flowlabel *fl = sfl->fl;
-		if (fl->label == label) {
+
+		if (fl->label == label && atomic_inc_not_zero(&fl->users)) {
 			fl->lastuse = jiffies;
-			atomic_inc(&fl->users);
 			rcu_read_unlock_bh();
 			return fl;
 		}
@@ -623,7 +623,8 @@ int ipv6_flowlabel_opt(struct sock *sk,
 						goto done;
 					}
 					fl1 = sfl->fl;
-					atomic_inc(&fl1->users);
+					if (!atomic_inc_not_zero(&fl1->users))
+						fl1 = NULL;
 					break;
 				}
 			}

[PATCH 4.14 05/45] lapb: fixed leak of control-blocks.

[Greg Kroah-Hartman]

From: Jeremy Sowden <jeremy@azazel.net>

[ Upstream commit 6be8e297f9bcea666ea85ac7a6cd9d52d6deaf92 ]

lapb_register calls lapb_create_cb, which initializes the control-
block's ref-count to one, and __lapb_insert_cb, which increments it when
adding the new block to the list of blocks.

lapb_unregister calls __lapb_remove_cb, which decrements the ref-count
when removing control-block from the list of blocks, and calls lapb_put
itself to decrement the ref-count before returning.

However, lapb_unregister also calls __lapb_devtostruct to look up the
right control-block for the given net_device, and __lapb_devtostruct
also bumps the ref-count, which means that when lapb_unregister returns
the ref-count is still 1 and the control-block is leaked.

Call lapb_put after __lapb_devtostruct to fix leak.

Reported-by: syzbot+afb980676c836b4a0afa@syzkaller.appspotmail.com
Signed-off-by: Jeremy Sowden <jeremy@azazel.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/lapb/lapb_iface.c |    1 +
 1 file changed, 1 insertion(+)

--- a/net/lapb/lapb_iface.c
+++ b/net/lapb/lapb_iface.c
@@ -182,6 +182,7 @@ int lapb_unregister(struct net_device *d
 	lapb = __lapb_devtostruct(dev);
 	if (!lapb)
 		goto out;
+	lapb_put(lapb);
 
 	lapb_stop_t1timer(lapb);
 	lapb_stop_t2timer(lapb);

[PATCH 4.14 06/45] neigh: fix use-after-free read in pneigh_get_next

[Greg Kroah-Hartman]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit f3e92cb8e2eb8c27d109e6fd73d3a69a8c09e288 ]

Nine years ago, I added RCU handling to neighbours, not pneighbours.
(pneigh are not commonly used)

Unfortunately I missed that /proc dump operations would use a
common entry and exit point : neigh_seq_start() and neigh_seq_stop()

We need to read_lock(tbl->lock) or risk use-after-free while
iterating the pneigh structures.

We might later convert pneigh to RCU and revert this patch.

sysbot reported :

BUG: KASAN: use-after-free in pneigh_get_next.isra.0+0x24b/0x280 net/core/neighbour.c:3158
Read of size 8 at addr ffff888097f2a700 by task syz-executor.0/9825

CPU: 1 PID: 9825 Comm: syz-executor.0 Not tainted 5.2.0-rc4+ #32
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x172/0x1f0 lib/dump_stack.c:113
 print_address_description.cold+0x7c/0x20d mm/kasan/report.c:188
 __kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317
 kasan_report+0x12/0x20 mm/kasan/common.c:614
 __asan_report_load8_noabort+0x14/0x20 mm/kasan/generic_report.c:132
 pneigh_get_next.isra.0+0x24b/0x280 net/core/neighbour.c:3158
 neigh_seq_next+0xdb/0x210 net/core/neighbour.c:3240
 seq_read+0x9cf/0x1110 fs/seq_file.c:258
 proc_reg_read+0x1fc/0x2c0 fs/proc/inode.c:221
 do_loop_readv_writev fs/read_write.c:714 [inline]
 do_loop_readv_writev fs/read_write.c:701 [inline]
 do_iter_read+0x4a4/0x660 fs/read_write.c:935
 vfs_readv+0xf0/0x160 fs/read_write.c:997
 kernel_readv fs/splice.c:359 [inline]
 default_file_splice_read+0x475/0x890 fs/splice.c:414
 do_splice_to+0x127/0x180 fs/splice.c:877
 splice_direct_to_actor+0x2d2/0x970 fs/splice.c:954
 do_splice_direct+0x1da/0x2a0 fs/splice.c:1063
 do_sendfile+0x597/0xd00 fs/read_write.c:1464
 __do_sys_sendfile64 fs/read_write.c:1525 [inline]
 __se_sys_sendfile64 fs/read_write.c:1511 [inline]
 __x64_sys_sendfile64+0x1dd/0x220 fs/read_write.c:1511
 do_syscall_64+0xfd/0x680 arch/x86/entry/common.c:301
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x4592c9
Code: fd b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 cb b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f4aab51dc78 EFLAGS: 00000246 ORIG_RAX: 0000000000000028
RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 00000000004592c9
RDX: 0000000000000000 RSI: 0000000000000004 RDI: 0000000000000005
RBP: 000000000075bf20 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000080000000 R11: 0000000000000246 R12: 00007f4aab51e6d4
R13: 00000000004c689d R14: 00000000004db828 R15: 00000000ffffffff

Allocated by task 9827:
 save_stack+0x23/0x90 mm/kasan/common.c:71
 set_track mm/kasan/common.c:79 [inline]
 __kasan_kmalloc mm/kasan/common.c:489 [inline]
 __kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:462
 kasan_kmalloc+0x9/0x10 mm/kasan/common.c:503
 __do_kmalloc mm/slab.c:3660 [inline]
 __kmalloc+0x15c/0x740 mm/slab.c:3669
 kmalloc include/linux/slab.h:552 [inline]
 pneigh_lookup+0x19c/0x4a0 net/core/neighbour.c:731
 arp_req_set_public net/ipv4/arp.c:1010 [inline]
 arp_req_set+0x613/0x720 net/ipv4/arp.c:1026
 arp_ioctl+0x652/0x7f0 net/ipv4/arp.c:1226
 inet_ioctl+0x2a0/0x340 net/ipv4/af_inet.c:926
 sock_do_ioctl+0xd8/0x2f0 net/socket.c:1043
 sock_ioctl+0x3ed/0x780 net/socket.c:1194
 vfs_ioctl fs/ioctl.c:46 [inline]
 file_ioctl fs/ioctl.c:509 [inline]
 do_vfs_ioctl+0xd5f/0x1380 fs/ioctl.c:696
 ksys_ioctl+0xab/0xd0 fs/ioctl.c:713
 __do_sys_ioctl fs/ioctl.c:720 [inline]
 __se_sys_ioctl fs/ioctl.c:718 [inline]
 __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:718
 do_syscall_64+0xfd/0x680 arch/x86/entry/common.c:301
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Freed by task 9824:
 save_stack+0x23/0x90 mm/kasan/common.c:71
 set_track mm/kasan/common.c:79 [inline]
 __kasan_slab_free+0x102/0x150 mm/kasan/common.c:451
 kasan_slab_free+0xe/0x10 mm/kasan/common.c:459
 __cache_free mm/slab.c:3432 [inline]
 kfree+0xcf/0x220 mm/slab.c:3755
 pneigh_ifdown_and_unlock net/core/neighbour.c:812 [inline]
 __neigh_ifdown+0x236/0x2f0 net/core/neighbour.c:356
 neigh_ifdown+0x20/0x30 net/core/neighbour.c:372
 arp_ifdown+0x1d/0x21 net/ipv4/arp.c:1274
 inetdev_destroy net/ipv4/devinet.c:319 [inline]
 inetdev_event+0xa14/0x11f0 net/ipv4/devinet.c:1544
 notifier_call_chain+0xc2/0x230 kernel/notifier.c:95
 __raw_notifier_call_chain kernel/notifier.c:396 [inline]
 raw_notifier_call_chain+0x2e/0x40 kernel/notifier.c:403
 call_netdevice_notifiers_info+0x3f/0x90 net/core/dev.c:1749
 call_netdevice_notifiers_extack net/core/dev.c:1761 [inline]
 call_netdevice_notifiers net/core/dev.c:1775 [inline]
 rollback_registered_many+0x9b9/0xfc0 net/core/dev.c:8178
 rollback_registered+0x109/0x1d0 net/core/dev.c:8220
 unregister_netdevice_queue net/core/dev.c:9267 [inline]
 unregister_netdevice_queue+0x1ee/0x2c0 net/core/dev.c:9260
 unregister_netdevice include/linux/netdevice.h:2631 [inline]
 __tun_detach+0xd8a/0x1040 drivers/net/tun.c:724
 tun_detach drivers/net/tun.c:741 [inline]
 tun_chr_close+0xe0/0x180 drivers/net/tun.c:3451
 __fput+0x2ff/0x890 fs/file_table.c:280
 ____fput+0x16/0x20 fs/file_table.c:313
 task_work_run+0x145/0x1c0 kernel/task_work.c:113
 tracehook_notify_resume include/linux/tracehook.h:185 [inline]
 exit_to_usermode_loop+0x273/0x2c0 arch/x86/entry/common.c:168
 prepare_exit_to_usermode arch/x86/entry/common.c:199 [inline]
 syscall_return_slowpath arch/x86/entry/common.c:279 [inline]
 do_syscall_64+0x58e/0x680 arch/x86/entry/common.c:304
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

The buggy address belongs to the object at ffff888097f2a700
 which belongs to the cache kmalloc-64 of size 64
The buggy address is located 0 bytes inside of
 64-byte region [ffff888097f2a700, ffff888097f2a740)
The buggy address belongs to the page:
page:ffffea00025fca80 refcount:1 mapcount:0 mapping:ffff8880aa400340 index:0x0
flags: 0x1fffc0000000200(slab)
raw: 01fffc0000000200 ffffea000250d548 ffffea00025726c8 ffff8880aa400340
raw: 0000000000000000 ffff888097f2a000 0000000100000020 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff888097f2a600: 00 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc
 ffff888097f2a680: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
>ffff888097f2a700: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
                   ^
 ffff888097f2a780: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
 ffff888097f2a800: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc

Fixes: 767e97e1e0db ("neigh: RCU conversion of struct neighbour")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/core/neighbour.c |    7 +++++++
 1 file changed, 7 insertions(+)

--- a/net/core/neighbour.c
+++ b/net/core/neighbour.c
@@ -2743,6 +2743,7 @@ static void *neigh_get_idx_any(struct se
 }
 
 void *neigh_seq_start(struct seq_file *seq, loff_t *pos, struct neigh_table *tbl, unsigned int neigh_seq_flags)
+	__acquires(tbl->lock)
 	__acquires(rcu_bh)
 {
 	struct neigh_seq_state *state = seq->private;
@@ -2753,6 +2754,7 @@ void *neigh_seq_start(struct seq_file *s
 
 	rcu_read_lock_bh();
 	state->nht = rcu_dereference_bh(tbl->nht);
+	read_lock(&tbl->lock);
 
 	return *pos ? neigh_get_idx_any(seq, pos) : SEQ_START_TOKEN;
 }
@@ -2786,8 +2788,13 @@ out:
 EXPORT_SYMBOL(neigh_seq_next);
 
 void neigh_seq_stop(struct seq_file *seq, void *v)
+	__releases(tbl->lock)
 	__releases(rcu_bh)
 {
+	struct neigh_seq_state *state = seq->private;
+	struct neigh_table *tbl = state->tbl;
+
+	read_unlock(&tbl->lock);
 	rcu_read_unlock_bh();
 }
 EXPORT_SYMBOL(neigh_seq_stop);

[PATCH 4.14 07/45] net: openvswitch: do not free vport if register_netdevice() is failed.

[Greg Kroah-Hartman]

From: Taehee Yoo <ap420073@gmail.com>

[ Upstream commit 309b66970ee2abf721ecd0876a48940fa0b99a35 ]

In order to create an internal vport, internal_dev_create() is used and
that calls register_netdevice() internally.
If register_netdevice() fails, it calls dev->priv_destructor() to free
private data of netdev. actually, a private data of this is a vport.

Hence internal_dev_create() should not free and use a vport after failure
of register_netdevice().

Test command
    ovs-dpctl add-dp bonding_masters

Splat looks like:
[ 1035.667767] kasan: GPF could be caused by NULL-ptr deref or user memory access
[ 1035.675958] general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI
[ 1035.676916] CPU: 1 PID: 1028 Comm: ovs-vswitchd Tainted: G    B             5.2.0-rc3+ #240
[ 1035.676916] RIP: 0010:internal_dev_create+0x2e5/0x4e0 [openvswitch]
[ 1035.676916] Code: 48 c1 ea 03 80 3c 02 00 0f 85 9f 01 00 00 4c 8b 23 48 b8 00 00 00 00 00 fc ff df 49 8d bc 24 60 05 00 00 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 86 01 00 00 49 8b bc 24 60 05 00 00 e8 e4 68 f4
[ 1035.713720] RSP: 0018:ffff88810dcb7578 EFLAGS: 00010206
[ 1035.713720] RAX: dffffc0000000000 RBX: ffff88810d13fe08 RCX: ffffffff84297704
[ 1035.713720] RDX: 00000000000000ac RSI: 0000000000000000 RDI: 0000000000000560
[ 1035.713720] RBP: 00000000ffffffef R08: fffffbfff0d3b881 R09: fffffbfff0d3b881
[ 1035.713720] R10: 0000000000000001 R11: fffffbfff0d3b880 R12: 0000000000000000
[ 1035.768776] R13: 0000607ee460b900 R14: ffff88810dcb7690 R15: ffff88810dcb7698
[ 1035.777709] FS:  00007f02095fc980(0000) GS:ffff88811b400000(0000) knlGS:0000000000000000
[ 1035.777709] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1035.777709] CR2: 00007ffdf01d2f28 CR3: 0000000108258000 CR4: 00000000001006e0
[ 1035.777709] Call Trace:
[ 1035.777709]  ovs_vport_add+0x267/0x4f0 [openvswitch]
[ 1035.777709]  new_vport+0x15/0x1e0 [openvswitch]
[ 1035.777709]  ovs_vport_cmd_new+0x567/0xd10 [openvswitch]
[ 1035.777709]  ? ovs_dp_cmd_dump+0x490/0x490 [openvswitch]
[ 1035.777709]  ? __kmalloc+0x131/0x2e0
[ 1035.777709]  ? genl_family_rcv_msg+0xa54/0x1030
[ 1035.777709]  genl_family_rcv_msg+0x63a/0x1030
[ 1035.777709]  ? genl_unregister_family+0x630/0x630
[ 1035.841681]  ? debug_show_all_locks+0x2d0/0x2d0
[ ... ]

Fixes: cf124db566e6 ("net: Fix inconsistent teardown and release of private netdev state.")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Reviewed-by: Greg Rose <gvrose8192@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/openvswitch/vport-internal_dev.c |   18 ++++++++++++------
 1 file changed, 12 insertions(+), 6 deletions(-)

--- a/net/openvswitch/vport-internal_dev.c
+++ b/net/openvswitch/vport-internal_dev.c
@@ -176,7 +176,9 @@ static struct vport *internal_dev_create
 {
 	struct vport *vport;
 	struct internal_dev *internal_dev;
+	struct net_device *dev;
 	int err;
+	bool free_vport = true;
 
 	vport = ovs_vport_alloc(0, &ovs_internal_vport_ops, parms);
 	if (IS_ERR(vport)) {
@@ -184,8 +186,9 @@ static struct vport *internal_dev_create
 		goto error;
 	}
 
-	vport->dev = alloc_netdev(sizeof(struct internal_dev),
-				  parms->name, NET_NAME_USER, do_setup);
+	dev = alloc_netdev(sizeof(struct internal_dev),
+			   parms->name, NET_NAME_USER, do_setup);
+	vport->dev = dev;
 	if (!vport->dev) {
 		err = -ENOMEM;
 		goto error_free_vport;
@@ -207,8 +210,10 @@ static struct vport *internal_dev_create
 
 	rtnl_lock();
 	err = register_netdevice(vport->dev);
-	if (err)
+	if (err) {
+		free_vport = false;
 		goto error_unlock;
+	}
 
 	dev_set_promiscuity(vport->dev, 1);
 	rtnl_unlock();
@@ -218,11 +223,12 @@ static struct vport *internal_dev_create
 
 error_unlock:
 	rtnl_unlock();
-	free_percpu(vport->dev->tstats);
+	free_percpu(dev->tstats);
 error_free_netdev:
-	free_netdev(vport->dev);
+	free_netdev(dev);
 error_free_vport:
-	ovs_vport_free(vport);
+	if (free_vport)
+		ovs_vport_free(vport);
 error:
 	return ERR_PTR(err);
 }

[PATCH 4.14 08/45] sctp: Free cookie before we memdup a new one

[Greg Kroah-Hartman]

From: Neil Horman <nhorman@tuxdriver.com>

[ Upstream commit ce950f1050cece5e406a5cde723c69bba60e1b26 ]

Based on comments from Xin, even after fixes for our recent syzbot
report of cookie memory leaks, its possible to get a resend of an INIT
chunk which would lead to us leaking cookie memory.

To ensure that we don't leak cookie memory, free any previously
allocated cookie first.

Change notes
v1->v2
update subsystem tag in subject (davem)
repeat kfree check for peer_random and peer_hmacs (xin)

v2->v3
net->sctp
also free peer_chunks

v3->v4
fix subject tags

v4->v5
remove cut line

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Reported-by: syzbot+f7e9153b037eac9b1df8@syzkaller.appspotmail.com
CC: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
CC: Xin Long <lucien.xin@gmail.com>
CC: "David S. Miller" <davem@davemloft.net>
CC: netdev@vger.kernel.org
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/sctp/sm_make_chunk.c |    8 ++++++++
 1 file changed, 8 insertions(+)

--- a/net/sctp/sm_make_chunk.c
+++ b/net/sctp/sm_make_chunk.c
@@ -2586,6 +2586,8 @@ do_addr_param:
 	case SCTP_PARAM_STATE_COOKIE:
 		asoc->peer.cookie_len =
 			ntohs(param.p->length) - sizeof(struct sctp_paramhdr);
+		if (asoc->peer.cookie)
+			kfree(asoc->peer.cookie);
 		asoc->peer.cookie = kmemdup(param.cookie->body, asoc->peer.cookie_len, gfp);
 		if (!asoc->peer.cookie)
 			retval = 0;
@@ -2650,6 +2652,8 @@ do_addr_param:
 			goto fall_through;
 
 		/* Save peer's random parameter */
+		if (asoc->peer.peer_random)
+			kfree(asoc->peer.peer_random);
 		asoc->peer.peer_random = kmemdup(param.p,
 					    ntohs(param.p->length), gfp);
 		if (!asoc->peer.peer_random) {
@@ -2663,6 +2667,8 @@ do_addr_param:
 			goto fall_through;
 
 		/* Save peer's HMAC list */
+		if (asoc->peer.peer_hmacs)
+			kfree(asoc->peer.peer_hmacs);
 		asoc->peer.peer_hmacs = kmemdup(param.p,
 					    ntohs(param.p->length), gfp);
 		if (!asoc->peer.peer_hmacs) {
@@ -2678,6 +2684,8 @@ do_addr_param:
 		if (!ep->auth_enable)
 			goto fall_through;
 
+		if (asoc->peer.peer_chunks)
+			kfree(asoc->peer.peer_chunks);
 		asoc->peer.peer_chunks = kmemdup(param.p,
 					    ntohs(param.p->length), gfp);
 		if (!asoc->peer.peer_chunks)

[PATCH 4.14 09/45] sunhv: Fix device naming inconsistency between sunhv_console and sunhv_reg

[Greg Kroah-Hartman]

From: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>

[ Upstream commit 07a6d63eb1b54b5fb38092780fe618dfe1d96e23 ]

In d5a2aa24, the name in struct console sunhv_console was changed from "ttyS"
to "ttyHV" while the name in struct uart_ops sunhv_pops remained unchanged.

This results in the hypervisor console device to be listed as "ttyHV0" under
/proc/consoles while the device node is still named "ttyS0":

root@osaka:~# cat /proc/consoles
ttyHV0               -W- (EC p  )    4:64
tty0                 -WU (E     )    4:1
root@osaka:~# readlink /sys/dev/char/4:64
../../devices/root/f02836f0/f0285690/tty/ttyS0
root@osaka:~#

This means that any userland code which tries to determine the name of the
device file of the hypervisor console device can not rely on the information
provided by /proc/consoles. In particular, booting current versions of debian-
installer inside a SPARC LDOM will fail with the installer unable to determine
the console device.

After renaming the device in struct uart_ops sunhv_pops to "ttyHV" as well,
the inconsistency is fixed and it is possible again to determine the name
of the device file of the hypervisor console device by reading the contents
of /proc/console:

root@osaka:~# cat /proc/consoles
ttyHV0               -W- (EC p  )    4:64
tty0                 -WU (E     )    4:1
root@osaka:~# readlink /sys/dev/char/4:64
../../devices/root/f02836f0/f0285690/tty/ttyHV0
root@osaka:~#

With this change, debian-installer works correctly when installing inside
a SPARC LDOM.

Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/sunhv.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/tty/serial/sunhv.c
+++ b/drivers/tty/serial/sunhv.c
@@ -396,7 +396,7 @@ static const struct uart_ops sunhv_pops
 static struct uart_driver sunhv_reg = {
 	.owner			= THIS_MODULE,
 	.driver_name		= "sunhv",
-	.dev_name		= "ttyS",
+	.dev_name		= "ttyHV",
 	.major			= TTY_MAJOR,
 };
 

[PATCH 4.14 10/45] Staging: vc04_services: Fix a couple error codes

[Greg Kroah-Hartman]

[ Upstream commit ca4e4efbefbbdde0a7bb3023ea08d491f4daf9b9 ]

These are accidentally returning positive EINVAL instead of negative
-EINVAL.  Some of the callers treat positive values as success.

Fixes: 7b3ad5abf027 ("staging: Import the BCM2835 MMAL-based V4L2 camera driver.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/vc04_services/bcm2835-camera/controls.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/staging/vc04_services/bcm2835-camera/controls.c b/drivers/staging/vc04_services/bcm2835-camera/controls.c
index 77a5d6f4e1eb..8a242f609d3b 100644
--- a/drivers/staging/vc04_services/bcm2835-camera/controls.c
+++ b/drivers/staging/vc04_services/bcm2835-camera/controls.c
@@ -579,7 +579,7 @@ static int ctrl_set_image_effect(struct bm2835_mmal_dev *dev,
 				dev->colourfx.enable ? "true" : "false",
 				dev->colourfx.u, dev->colourfx.v,
 				ret, (ret == 0 ? 0 : -EINVAL));
-	return (ret == 0 ? 0 : EINVAL);
+	return (ret == 0 ? 0 : -EINVAL);
 }
 
 static int ctrl_set_colfx(struct bm2835_mmal_dev *dev,
@@ -603,7 +603,7 @@ static int ctrl_set_colfx(struct bm2835_mmal_dev *dev,
 		 "%s: After: mmal_ctrl:%p ctrl id:0x%x ctrl val:%d ret %d(%d)\n",
 			__func__, mmal_ctrl, ctrl->id, ctrl->val, ret,
 			(ret == 0 ? 0 : -EINVAL));
-	return (ret == 0 ? 0 : EINVAL);
+	return (ret == 0 ? 0 : -EINVAL);
 }
 
 static int ctrl_set_bitrate(struct bm2835_mmal_dev *dev,
-- 
2.20.1

[PATCH 4.14 11/45] perf/x86/intel/ds: Fix EVENT vs. UEVENT PEBS constraints

[Greg Kroah-Hartman]

[ Upstream commit 23e3983a466cd540ffdd2bbc6e0c51e31934f941 ]

This patch fixes an bug revealed by the following commit:

  6b89d4c1ae85 ("perf/x86/intel: Fix INTEL_FLAGS_EVENT_CONSTRAINT* masking")

That patch modified INTEL_FLAGS_EVENT_CONSTRAINT() to only look at the event code
when matching a constraint. If code+umask were needed, then the
INTEL_FLAGS_UEVENT_CONSTRAINT() macro was needed instead.
This broke with some of the constraints for PEBS events.

Several of them, including the one used for cycles:p, cycles:pp, cycles:ppp
fell in that category and caused the event to be rejected in PEBS mode.
In other words, on some platforms a cmdline such as:

  $ perf top -e cycles:pp

would fail with -EINVAL.

This patch fixes this bug by properly using INTEL_FLAGS_UEVENT_CONSTRAINT()
when needed in the PEBS constraint tables.

Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: kan.liang@intel.com
Link: http://lkml.kernel.org/r/20190521005246.423-1-eranian@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/events/intel/ds.c | 28 ++++++++++++++--------------
 1 file changed, 14 insertions(+), 14 deletions(-)

diff --git a/arch/x86/events/intel/ds.c b/arch/x86/events/intel/ds.c
index 25386be0d757..3310f9f6c3e1 100644
--- a/arch/x86/events/intel/ds.c
+++ b/arch/x86/events/intel/ds.c
@@ -681,7 +681,7 @@ struct event_constraint intel_core2_pebs_event_constraints[] = {
 	INTEL_FLAGS_UEVENT_CONSTRAINT(0x1fc7, 0x1), /* SIMD_INST_RETURED.ANY */
 	INTEL_FLAGS_EVENT_CONSTRAINT(0xcb, 0x1),    /* MEM_LOAD_RETIRED.* */
 	/* INST_RETIRED.ANY_P, inv=1, cmask=16 (cycles:p). */
-	INTEL_FLAGS_EVENT_CONSTRAINT(0x108000c0, 0x01),
+	INTEL_FLAGS_UEVENT_CONSTRAINT(0x108000c0, 0x01),
 	EVENT_CONSTRAINT_END
 };
 
@@ -690,7 +690,7 @@ struct event_constraint intel_atom_pebs_event_constraints[] = {
 	INTEL_FLAGS_UEVENT_CONSTRAINT(0x00c5, 0x1), /* MISPREDICTED_BRANCH_RETIRED */
 	INTEL_FLAGS_EVENT_CONSTRAINT(0xcb, 0x1),    /* MEM_LOAD_RETIRED.* */
 	/* INST_RETIRED.ANY_P, inv=1, cmask=16 (cycles:p). */
-	INTEL_FLAGS_EVENT_CONSTRAINT(0x108000c0, 0x01),
+	INTEL_FLAGS_UEVENT_CONSTRAINT(0x108000c0, 0x01),
 	/* Allow all events as PEBS with no flags */
 	INTEL_ALL_EVENT_CONSTRAINT(0, 0x1),
 	EVENT_CONSTRAINT_END
@@ -698,7 +698,7 @@ struct event_constraint intel_atom_pebs_event_constraints[] = {
 
 struct event_constraint intel_slm_pebs_event_constraints[] = {
 	/* INST_RETIRED.ANY_P, inv=1, cmask=16 (cycles:p). */
-	INTEL_FLAGS_EVENT_CONSTRAINT(0x108000c0, 0x1),
+	INTEL_FLAGS_UEVENT_CONSTRAINT(0x108000c0, 0x1),
 	/* Allow all events as PEBS with no flags */
 	INTEL_ALL_EVENT_CONSTRAINT(0, 0x1),
 	EVENT_CONSTRAINT_END
@@ -729,7 +729,7 @@ struct event_constraint intel_nehalem_pebs_event_constraints[] = {
 	INTEL_FLAGS_EVENT_CONSTRAINT(0xcb, 0xf),    /* MEM_LOAD_RETIRED.* */
 	INTEL_FLAGS_EVENT_CONSTRAINT(0xf7, 0xf),    /* FP_ASSIST.* */
 	/* INST_RETIRED.ANY_P, inv=1, cmask=16 (cycles:p). */
-	INTEL_FLAGS_EVENT_CONSTRAINT(0x108000c0, 0x0f),
+	INTEL_FLAGS_UEVENT_CONSTRAINT(0x108000c0, 0x0f),
 	EVENT_CONSTRAINT_END
 };
 
@@ -746,7 +746,7 @@ struct event_constraint intel_westmere_pebs_event_constraints[] = {
 	INTEL_FLAGS_EVENT_CONSTRAINT(0xcb, 0xf),    /* MEM_LOAD_RETIRED.* */
 	INTEL_FLAGS_EVENT_CONSTRAINT(0xf7, 0xf),    /* FP_ASSIST.* */
 	/* INST_RETIRED.ANY_P, inv=1, cmask=16 (cycles:p). */
-	INTEL_FLAGS_EVENT_CONSTRAINT(0x108000c0, 0x0f),
+	INTEL_FLAGS_UEVENT_CONSTRAINT(0x108000c0, 0x0f),
 	EVENT_CONSTRAINT_END
 };
 
@@ -755,7 +755,7 @@ struct event_constraint intel_snb_pebs_event_constraints[] = {
 	INTEL_PLD_CONSTRAINT(0x01cd, 0x8),    /* MEM_TRANS_RETIRED.LAT_ABOVE_THR */
 	INTEL_PST_CONSTRAINT(0x02cd, 0x8),    /* MEM_TRANS_RETIRED.PRECISE_STORES */
 	/* UOPS_RETIRED.ALL, inv=1, cmask=16 (cycles:p). */
-	INTEL_FLAGS_EVENT_CONSTRAINT(0x108001c2, 0xf),
+	INTEL_FLAGS_UEVENT_CONSTRAINT(0x108001c2, 0xf),
         INTEL_EXCLEVT_CONSTRAINT(0xd0, 0xf),    /* MEM_UOP_RETIRED.* */
         INTEL_EXCLEVT_CONSTRAINT(0xd1, 0xf),    /* MEM_LOAD_UOPS_RETIRED.* */
         INTEL_EXCLEVT_CONSTRAINT(0xd2, 0xf),    /* MEM_LOAD_UOPS_LLC_HIT_RETIRED.* */
@@ -770,9 +770,9 @@ struct event_constraint intel_ivb_pebs_event_constraints[] = {
         INTEL_PLD_CONSTRAINT(0x01cd, 0x8),    /* MEM_TRANS_RETIRED.LAT_ABOVE_THR */
 	INTEL_PST_CONSTRAINT(0x02cd, 0x8),    /* MEM_TRANS_RETIRED.PRECISE_STORES */
 	/* UOPS_RETIRED.ALL, inv=1, cmask=16 (cycles:p). */
-	INTEL_FLAGS_EVENT_CONSTRAINT(0x108001c2, 0xf),
+	INTEL_FLAGS_UEVENT_CONSTRAINT(0x108001c2, 0xf),
 	/* INST_RETIRED.PREC_DIST, inv=1, cmask=16 (cycles:ppp). */
-	INTEL_FLAGS_EVENT_CONSTRAINT(0x108001c0, 0x2),
+	INTEL_FLAGS_UEVENT_CONSTRAINT(0x108001c0, 0x2),
 	INTEL_EXCLEVT_CONSTRAINT(0xd0, 0xf),    /* MEM_UOP_RETIRED.* */
 	INTEL_EXCLEVT_CONSTRAINT(0xd1, 0xf),    /* MEM_LOAD_UOPS_RETIRED.* */
 	INTEL_EXCLEVT_CONSTRAINT(0xd2, 0xf),    /* MEM_LOAD_UOPS_LLC_HIT_RETIRED.* */
@@ -786,9 +786,9 @@ struct event_constraint intel_hsw_pebs_event_constraints[] = {
 	INTEL_FLAGS_UEVENT_CONSTRAINT(0x01c0, 0x2), /* INST_RETIRED.PRECDIST */
 	INTEL_PLD_CONSTRAINT(0x01cd, 0xf),    /* MEM_TRANS_RETIRED.* */
 	/* UOPS_RETIRED.ALL, inv=1, cmask=16 (cycles:p). */
-	INTEL_FLAGS_EVENT_CONSTRAINT(0x108001c2, 0xf),
+	INTEL_FLAGS_UEVENT_CONSTRAINT(0x108001c2, 0xf),
 	/* INST_RETIRED.PREC_DIST, inv=1, cmask=16 (cycles:ppp). */
-	INTEL_FLAGS_EVENT_CONSTRAINT(0x108001c0, 0x2),
+	INTEL_FLAGS_UEVENT_CONSTRAINT(0x108001c0, 0x2),
 	INTEL_FLAGS_UEVENT_CONSTRAINT_DATALA_NA(0x01c2, 0xf), /* UOPS_RETIRED.ALL */
 	INTEL_FLAGS_UEVENT_CONSTRAINT_DATALA_XLD(0x11d0, 0xf), /* MEM_UOPS_RETIRED.STLB_MISS_LOADS */
 	INTEL_FLAGS_UEVENT_CONSTRAINT_DATALA_XLD(0x21d0, 0xf), /* MEM_UOPS_RETIRED.LOCK_LOADS */
@@ -809,9 +809,9 @@ struct event_constraint intel_bdw_pebs_event_constraints[] = {
 	INTEL_FLAGS_UEVENT_CONSTRAINT(0x01c0, 0x2), /* INST_RETIRED.PRECDIST */
 	INTEL_PLD_CONSTRAINT(0x01cd, 0xf),    /* MEM_TRANS_RETIRED.* */
 	/* UOPS_RETIRED.ALL, inv=1, cmask=16 (cycles:p). */
-	INTEL_FLAGS_EVENT_CONSTRAINT(0x108001c2, 0xf),
+	INTEL_FLAGS_UEVENT_CONSTRAINT(0x108001c2, 0xf),
 	/* INST_RETIRED.PREC_DIST, inv=1, cmask=16 (cycles:ppp). */
-	INTEL_FLAGS_EVENT_CONSTRAINT(0x108001c0, 0x2),
+	INTEL_FLAGS_UEVENT_CONSTRAINT(0x108001c0, 0x2),
 	INTEL_FLAGS_UEVENT_CONSTRAINT_DATALA_NA(0x01c2, 0xf), /* UOPS_RETIRED.ALL */
 	INTEL_FLAGS_UEVENT_CONSTRAINT_DATALA_LD(0x11d0, 0xf), /* MEM_UOPS_RETIRED.STLB_MISS_LOADS */
 	INTEL_FLAGS_UEVENT_CONSTRAINT_DATALA_LD(0x21d0, 0xf), /* MEM_UOPS_RETIRED.LOCK_LOADS */
@@ -832,9 +832,9 @@ struct event_constraint intel_bdw_pebs_event_constraints[] = {
 struct event_constraint intel_skl_pebs_event_constraints[] = {
 	INTEL_FLAGS_UEVENT_CONSTRAINT(0x1c0, 0x2),	/* INST_RETIRED.PREC_DIST */
 	/* INST_RETIRED.PREC_DIST, inv=1, cmask=16 (cycles:ppp). */
-	INTEL_FLAGS_EVENT_CONSTRAINT(0x108001c0, 0x2),
+	INTEL_FLAGS_UEVENT_CONSTRAINT(0x108001c0, 0x2),
 	/* INST_RETIRED.TOTAL_CYCLES_PS (inv=1, cmask=16) (cycles:p). */
-	INTEL_FLAGS_EVENT_CONSTRAINT(0x108000c0, 0x0f),
+	INTEL_FLAGS_UEVENT_CONSTRAINT(0x108000c0, 0x0f),
 	INTEL_PLD_CONSTRAINT(0x1cd, 0xf),		      /* MEM_TRANS_RETIRED.* */
 	INTEL_FLAGS_UEVENT_CONSTRAINT_DATALA_LD(0x11d0, 0xf), /* MEM_INST_RETIRED.STLB_MISS_LOADS */
 	INTEL_FLAGS_UEVENT_CONSTRAINT_DATALA_ST(0x12d0, 0xf), /* MEM_INST_RETIRED.STLB_MISS_STORES */
-- 
2.20.1

[PATCH 4.14 12/45] netfilter: nf_queue: fix reinject verdict handling

[Greg Kroah-Hartman]

[ Upstream commit 946c0d8e6ed43dae6527e878d0077c1e11015db0 ]

This patch fixes netfilter hook traversal when there are more than 1 hooks
returning NF_QUEUE verdict. When the first queue reinjects the packet,
'nf_reinject' starts traversing hooks with a proper hook_index. However,
if it again receives a NF_QUEUE verdict (by some other netfilter hook), it
queues the packet with a wrong hook_index. So, when the second queue
reinjects the packet, it re-executes hooks in between.

Fixes: 960632ece694 ("netfilter: convert hook list to an array")
Signed-off-by: Jagdish Motwani <jagdish.motwani@sophos.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nf_queue.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/net/netfilter/nf_queue.c b/net/netfilter/nf_queue.c
index f7e21953b1de..8260b1e73bbd 100644
--- a/net/netfilter/nf_queue.c
+++ b/net/netfilter/nf_queue.c
@@ -193,6 +193,7 @@ static unsigned int nf_iterate(struct sk_buff *skb,
 repeat:
 		verdict = nf_hook_entry_hookfn(hook, skb, state);
 		if (verdict != NF_ACCEPT) {
+			*index = i;
 			if (verdict != NF_REPEAT)
 				return verdict;
 			goto repeat;
-- 
2.20.1

[PATCH 4.14 13/45] ipvs: Fix use-after-free in ip_vs_in

[Greg Kroah-Hartman]

[ Upstream commit 719c7d563c17b150877cee03a4b812a424989dfa ]

BUG: KASAN: use-after-free in ip_vs_in.part.29+0xe8/0xd20 [ip_vs]
Read of size 4 at addr ffff8881e9b26e2c by task sshd/5603

CPU: 0 PID: 5603 Comm: sshd Not tainted 4.19.39+ #30
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
Call Trace:
 dump_stack+0x71/0xab
 print_address_description+0x6a/0x270
 kasan_report+0x179/0x2c0
 ip_vs_in.part.29+0xe8/0xd20 [ip_vs]
 ip_vs_in+0xd8/0x170 [ip_vs]
 nf_hook_slow+0x5f/0xe0
 __ip_local_out+0x1d5/0x250
 ip_local_out+0x19/0x60
 __tcp_transmit_skb+0xba1/0x14f0
 tcp_write_xmit+0x41f/0x1ed0
 ? _copy_from_iter_full+0xca/0x340
 __tcp_push_pending_frames+0x52/0x140
 tcp_sendmsg_locked+0x787/0x1600
 ? tcp_sendpage+0x60/0x60
 ? inet_sk_set_state+0xb0/0xb0
 tcp_sendmsg+0x27/0x40
 sock_sendmsg+0x6d/0x80
 sock_write_iter+0x121/0x1c0
 ? sock_sendmsg+0x80/0x80
 __vfs_write+0x23e/0x370
 vfs_write+0xe7/0x230
 ksys_write+0xa1/0x120
 ? __ia32_sys_read+0x50/0x50
 ? __audit_syscall_exit+0x3ce/0x450
 do_syscall_64+0x73/0x200
 entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7ff6f6147c60
Code: 73 01 c3 48 8b 0d 28 12 2d 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d 5d 73 2d 00 00 75 10 b8 01 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83
RSP: 002b:00007ffd772ead18 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000034 RCX: 00007ff6f6147c60
RDX: 0000000000000034 RSI: 000055df30a31270 RDI: 0000000000000003
RBP: 000055df30a31270 R08: 0000000000000000 R09: 0000000000000000
R10: 00007ffd772ead70 R11: 0000000000000246 R12: 00007ffd772ead74
R13: 00007ffd772eae20 R14: 00007ffd772eae24 R15: 000055df2f12ddc0

Allocated by task 6052:
 kasan_kmalloc+0xa0/0xd0
 __kmalloc+0x10a/0x220
 ops_init+0x97/0x190
 register_pernet_operations+0x1ac/0x360
 register_pernet_subsys+0x24/0x40
 0xffffffffc0ea016d
 do_one_initcall+0x8b/0x253
 do_init_module+0xe3/0x335
 load_module+0x2fc0/0x3890
 __do_sys_finit_module+0x192/0x1c0
 do_syscall_64+0x73/0x200
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Freed by task 6067:
 __kasan_slab_free+0x130/0x180
 kfree+0x90/0x1a0
 ops_free_list.part.7+0xa6/0xc0
 unregister_pernet_operations+0x18b/0x1f0
 unregister_pernet_subsys+0x1d/0x30
 ip_vs_cleanup+0x1d/0xd2f [ip_vs]
 __x64_sys_delete_module+0x20c/0x300
 do_syscall_64+0x73/0x200
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

The buggy address belongs to the object at ffff8881e9b26600 which belongs to the cache kmalloc-4096 of size 4096
The buggy address is located 2092 bytes inside of 4096-byte region [ffff8881e9b26600, ffff8881e9b27600)
The buggy address belongs to the page:
page:ffffea0007a6c800 count:1 mapcount:0 mapping:ffff888107c0e600 index:0x0 compound_mapcount: 0
flags: 0x17ffffc0008100(slab|head)
raw: 0017ffffc0008100 dead000000000100 dead000000000200 ffff888107c0e600
raw: 0000000000000000 0000000080070007 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

while unregistering ipvs module, ops_free_list calls
__ip_vs_cleanup, then nf_unregister_net_hooks be called to
do remove nf hook entries. It need a RCU period to finish,
however net->ipvs is set to NULL immediately, which will
trigger NULL pointer dereference when a packet is hooked
and handled by ip_vs_in where net->ipvs is dereferenced.

Another scene is ops_free_list call ops_free to free the
net_generic directly while __ip_vs_cleanup finished, then
calling ip_vs_in will triggers use-after-free.

This patch moves nf_unregister_net_hooks from __ip_vs_cleanup()
to __ip_vs_dev_cleanup(),  where rcu_barrier() is called by
unregister_pernet_device -> unregister_pernet_operations,
that will do the needed grace period.

Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: efe41606184e ("ipvs: convert to use pernet nf_hook api")
Suggested-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/ipvs/ip_vs_core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/netfilter/ipvs/ip_vs_core.c b/net/netfilter/ipvs/ip_vs_core.c
index d1c0378144f3..ee97ce176b9a 100644
--- a/net/netfilter/ipvs/ip_vs_core.c
+++ b/net/netfilter/ipvs/ip_vs_core.c
@@ -2268,7 +2268,6 @@ static void __net_exit __ip_vs_cleanup(struct net *net)
 {
 	struct netns_ipvs *ipvs = net_ipvs(net);
 
-	nf_unregister_net_hooks(net, ip_vs_ops, ARRAY_SIZE(ip_vs_ops));
 	ip_vs_service_net_cleanup(ipvs);	/* ip_vs_flush() with locks */
 	ip_vs_conn_net_cleanup(ipvs);
 	ip_vs_app_net_cleanup(ipvs);
@@ -2283,6 +2282,7 @@ static void __net_exit __ip_vs_dev_cleanup(struct net *net)
 {
 	struct netns_ipvs *ipvs = net_ipvs(net);
 	EnterFunction(2);
+	nf_unregister_net_hooks(net, ip_vs_ops, ARRAY_SIZE(ip_vs_ops));
 	ipvs->enable = 0;	/* Disable packet reception */
 	smp_wmb();
 	ip_vs_sync_net_cleanup(ipvs);
-- 
2.20.1

[PATCH 4.14 14/45] selftests: netfilter: missing error check when setting up veth interface

[Greg Kroah-Hartman]

[ Upstream commit 82ce6eb1dd13fd12e449b2ee2c2ec051e6f52c43 ]

A test for the basic NAT functionality uses ip command which needs veth
device. There is a condition where the kernel support for veth is not
compiled into the kernel and the test script breaks. This patch contains
code for reasonable error display and correct code exit.

Signed-off-by: Jeffrin Jose T <jeffrin@rajagiritech.edu.in>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/netfilter/nft_nat.sh | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/tools/testing/selftests/netfilter/nft_nat.sh b/tools/testing/selftests/netfilter/nft_nat.sh
index 8ec76681605c..f25f72a75cf3 100755
--- a/tools/testing/selftests/netfilter/nft_nat.sh
+++ b/tools/testing/selftests/netfilter/nft_nat.sh
@@ -23,7 +23,11 @@ ip netns add ns0
 ip netns add ns1
 ip netns add ns2
 
-ip link add veth0 netns ns0 type veth peer name eth0 netns ns1
+ip link add veth0 netns ns0 type veth peer name eth0 netns ns1 > /dev/null 2>&1
+if [ $? -ne 0 ];then
+    echo "SKIP: No virtual ethernet pair device support in kernel"
+    exit $ksft_skip
+fi
 ip link add veth1 netns ns0 type veth peer name eth0 netns ns2
 
 ip -net ns0 link set lo up
-- 
2.20.1

[PATCH 4.14 15/45] clk: ti: clkctrl: Fix clkdm_clk handling

[Greg Kroah-Hartman]

[ Upstream commit 1cc54078d104f5b4d7e9f8d55362efa5a8daffdb ]

We need to always call clkdm_clk_enable() and clkdm_clk_disable() even
the clkctrl clock(s) enabled for the domain do not have any gate register
bits. Otherwise clockdomains may never get enabled except when devices get
probed with the legacy "ti,hwmods" devicetree property.

Fixes: 88a172526c32 ("clk: ti: add support for clkctrl clocks")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/ti/clkctrl.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/clk/ti/clkctrl.c b/drivers/clk/ti/clkctrl.c
index 53e71d0503ec..82e4d5cccf84 100644
--- a/drivers/clk/ti/clkctrl.c
+++ b/drivers/clk/ti/clkctrl.c
@@ -124,9 +124,6 @@ static int _omap4_clkctrl_clk_enable(struct clk_hw *hw)
 	int ret;
 	union omap4_timeout timeout = { 0 };
 
-	if (!clk->enable_bit)
-		return 0;
-
 	if (clk->clkdm) {
 		ret = ti_clk_ll_ops->clkdm_clk_enable(clk->clkdm, hw->clk);
 		if (ret) {
@@ -138,6 +135,9 @@ static int _omap4_clkctrl_clk_enable(struct clk_hw *hw)
 		}
 	}
 
+	if (!clk->enable_bit)
+		return 0;
+
 	val = ti_clk_ll_ops->clk_readl(&clk->enable_reg);
 
 	val &= ~OMAP4_MODULEMODE_MASK;
@@ -166,7 +166,7 @@ static void _omap4_clkctrl_clk_disable(struct clk_hw *hw)
 	union omap4_timeout timeout = { 0 };
 
 	if (!clk->enable_bit)
-		return;
+		goto exit;
 
 	val = ti_clk_ll_ops->clk_readl(&clk->enable_reg);
 
-- 
2.20.1

[PATCH 4.14 16/45] powerpc/powernv: Return for invalid IMC domain

[Greg Kroah-Hartman]

[ Upstream commit b59bd3527fe3c1939340df558d7f9d568fc9f882 ]

Currently init_imc_pmu() can fail either because we try to register an
IMC unit with an invalid domain (i.e an IMC node not supported by the
kernel) or something went wrong while registering a valid IMC unit. In
both the cases kernel provides a 'Register failed' error message.

For example when trace-imc node is not supported by the kernel, but
skiboot advertises a trace-imc node we print:

  IMC Unknown Device type
  IMC PMU (null) Register failed

To avoid confusion just print the unknown device type message, before
attempting PMU registration, so the second message isn't printed.

Fixes: 8f95faaac56c ("powerpc/powernv: Detect and create IMC device")
Reported-by: Pavaman Subramaniyam <pavsubra@in.ibm.com>
Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Reviewed-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
[mpe: Reword change log a bit]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/platforms/powernv/opal-imc.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/powerpc/platforms/powernv/opal-imc.c b/arch/powerpc/platforms/powernv/opal-imc.c
index 6914b289c86b..7b93191dc2e3 100644
--- a/arch/powerpc/platforms/powernv/opal-imc.c
+++ b/arch/powerpc/platforms/powernv/opal-imc.c
@@ -87,6 +87,10 @@ static int imc_pmu_create(struct device_node *parent, int pmu_index, int domain)
 	struct imc_pmu *pmu_ptr;
 	u32 offset;
 
+	/* Return for unknown domain */
+	if (domain < 0)
+		return -EINVAL;
+
 	/* memory for pmu */
 	pmu_ptr = kzalloc(sizeof(struct imc_pmu), GFP_KERNEL);
 	if (!pmu_ptr)
-- 
2.20.1

[PATCH 4.14 17/45] mISDN: make sure device name is NUL terminated

[Greg Kroah-Hartman]

[ Upstream commit ccfb62f27beb295103e9392462b20a6ed807d0ea ]

The user can change the device_name with the IMSETDEVNAME ioctl, but we
need to ensure that the user's name is NUL terminated.  Otherwise it
could result in a buffer overflow when we copy the name back to the user
with IMGETDEVINFO ioctl.

I also changed two strcpy() calls which handle the name to strscpy().
Hopefully, there aren't any other ways to create a too long name, but
it's nice to do this as a kernel hardening measure.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/isdn/mISDN/socket.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/isdn/mISDN/socket.c b/drivers/isdn/mISDN/socket.c
index 65cb4aac8dce..477e07036add 100644
--- a/drivers/isdn/mISDN/socket.c
+++ b/drivers/isdn/mISDN/socket.c
@@ -394,7 +394,7 @@ data_sock_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg)
 			memcpy(di.channelmap, dev->channelmap,
 			       sizeof(di.channelmap));
 			di.nrbchan = dev->nrbchan;
-			strcpy(di.name, dev_name(&dev->dev));
+			strscpy(di.name, dev_name(&dev->dev), sizeof(di.name));
 			if (copy_to_user((void __user *)arg, &di, sizeof(di)))
 				err = -EFAULT;
 		} else
@@ -678,7 +678,7 @@ base_sock_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg)
 			memcpy(di.channelmap, dev->channelmap,
 			       sizeof(di.channelmap));
 			di.nrbchan = dev->nrbchan;
-			strcpy(di.name, dev_name(&dev->dev));
+			strscpy(di.name, dev_name(&dev->dev), sizeof(di.name));
 			if (copy_to_user((void __user *)arg, &di, sizeof(di)))
 				err = -EFAULT;
 		} else
@@ -692,6 +692,7 @@ base_sock_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg)
 			err = -EFAULT;
 			break;
 		}
+		dn.name[sizeof(dn.name) - 1] = '\0';
 		dev = get_mdevice(dn.id);
 		if (dev)
 			err = device_rename(&dev->dev, dn.name);
-- 
2.20.1

[PATCH 4.14 18/45] x86/CPU/AMD: Dont force the CPB cap when running under a hypervisor

[Greg Kroah-Hartman]

[ Upstream commit 2ac44ab608705948564791ce1d15d43ba81a1e38 ]

For F17h AMD CPUs, the CPB capability ('Core Performance Boost') is forcibly set,
because some versions of that chip incorrectly report that they do not have it.

However, a hypervisor may filter out the CPB capability, for good
reasons. For example, KVM currently does not emulate setting the CPB
bit in MSR_K7_HWCR, and unchecked MSR access errors will be thrown
when trying to set it as a guest:

	unchecked MSR access error: WRMSR to 0xc0010015 (tried to write 0x0000000001000011) at rIP: 0xffffffff890638f4 (native_write_msr+0x4/0x20)

	Call Trace:
	boost_set_msr+0x50/0x80 [acpi_cpufreq]
	cpuhp_invoke_callback+0x86/0x560
	sort_range+0x20/0x20
	cpuhp_thread_fun+0xb0/0x110
	smpboot_thread_fn+0xef/0x160
	kthread+0x113/0x130
	kthread_create_worker_on_cpu+0x70/0x70
	ret_from_fork+0x35/0x40

To avoid this issue, don't forcibly set the CPB capability for a CPU
when running under a hypervisor.

Signed-off-by: Frank van der Linden <fllinden@amazon.com>
Acked-by: Borislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: bp@alien8.de
Cc: jiaxun.yang@flygoat.com
Fixes: 0237199186e7 ("x86/CPU/AMD: Set the CPB bit unconditionally on F17h")
Link: http://lkml.kernel.org/r/20190522221745.GA15789@dev-dsk-fllinden-2c-c1893d73.us-west-2.amazon.com
[ Minor edits to the changelog. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kernel/cpu/amd.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c
index ecf82859f1c0..bbebcd7a781e 100644
--- a/arch/x86/kernel/cpu/amd.c
+++ b/arch/x86/kernel/cpu/amd.c
@@ -792,8 +792,11 @@ static void init_amd_zn(struct cpuinfo_x86 *c)
 {
 	set_cpu_cap(c, X86_FEATURE_ZEN);
 
-	/* Fix erratum 1076: CPB feature bit not being set in CPUID. */
-	if (!cpu_has(c, X86_FEATURE_CPB))
+	/*
+	 * Fix erratum 1076: CPB feature bit not being set in CPUID.
+	 * Always set it, except when running under a hypervisor.
+	 */
+	if (!cpu_has(c, X86_FEATURE_HYPERVISOR) && !cpu_has(c, X86_FEATURE_CPB))
 		set_cpu_cap(c, X86_FEATURE_CPB);
 }
 
-- 
2.20.1

[PATCH 4.14 19/45] perf/ring_buffer: Fix exposing a temporarily decreased data_head

[Greg Kroah-Hartman]

[ Upstream commit 1b038c6e05ff70a1e66e3e571c2e6106bdb75f53 ]

In perf_output_put_handle(), an IRQ/NMI can happen in below location and
write records to the same ring buffer:

	...
	local_dec_and_test(&rb->nest)
	...                          <-- an IRQ/NMI can happen here
	rb->user_page->data_head = head;
	...

In this case, a value A is written to data_head in the IRQ, then a value
B is written to data_head after the IRQ. And A > B. As a result,
data_head is temporarily decreased from A to B. And a reader may see
data_head < data_tail if it read the buffer frequently enough, which
creates unexpected behaviors.

This can be fixed by moving dec(&rb->nest) to after updating data_head,
which prevents the IRQ/NMI above from updating data_head.

[ Split up by peterz. ]

Signed-off-by: Yabin Cui <yabinc@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: mark.rutland@arm.com
Fixes: ef60777c9abd ("perf: Optimize the perf_output() path by removing IRQ-disables")
Link: http://lkml.kernel.org/r/20190517115418.224478157@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/events/ring_buffer.c | 24 ++++++++++++++++++++----
 1 file changed, 20 insertions(+), 4 deletions(-)

diff --git a/kernel/events/ring_buffer.c b/kernel/events/ring_buffer.c
index 489dc6b60053..fde853270c09 100644
--- a/kernel/events/ring_buffer.c
+++ b/kernel/events/ring_buffer.c
@@ -52,11 +52,18 @@ static void perf_output_put_handle(struct perf_output_handle *handle)
 	head = local_read(&rb->head);
 
 	/*
-	 * IRQ/NMI can happen here, which means we can miss a head update.
+	 * IRQ/NMI can happen here and advance @rb->head, causing our
+	 * load above to be stale.
 	 */
 
-	if (!local_dec_and_test(&rb->nest))
+	/*
+	 * If this isn't the outermost nesting, we don't have to update
+	 * @rb->user_page->data_head.
+	 */
+	if (local_read(&rb->nest) > 1) {
+		local_dec(&rb->nest);
 		goto out;
+	}
 
 	/*
 	 * Since the mmap() consumer (userspace) can run on a different CPU:
@@ -88,9 +95,18 @@ static void perf_output_put_handle(struct perf_output_handle *handle)
 	rb->user_page->data_head = head;
 
 	/*
-	 * Now check if we missed an update -- rely on previous implied
-	 * compiler barriers to force a re-read.
+	 * We must publish the head before decrementing the nest count,
+	 * otherwise an IRQ/NMI can publish a more recent head value and our
+	 * write will (temporarily) publish a stale value.
+	 */
+	barrier();
+	local_set(&rb->nest, 0);
+
+	/*
+	 * Ensure we decrement @rb->nest before we validate the @rb->head.
+	 * Otherwise we cannot be sure we caught the 'last' nested update.
 	 */
+	barrier();
 	if (unlikely(head != local_read(&rb->head))) {
 		local_inc(&rb->nest);
 		goto again;
-- 
2.20.1

[PATCH 4.14 20/45] perf/ring_buffer: Add ordering to rb->nest increment

[Greg Kroah-Hartman]

[ Upstream commit 3f9fbe9bd86c534eba2faf5d840fd44c6049f50e ]

Similar to how decrementing rb->next too early can cause data_head to
(temporarily) be observed to go backward, so too can this happen when
we increment too late.

This barrier() ensures the rb->head load happens after the increment,
both the one in the 'goto again' path, as the one from
perf_output_get_handle() -- albeit very unlikely to matter for the
latter.

Suggested-by: Yabin Cui <yabinc@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: acme@kernel.org
Cc: mark.rutland@arm.com
Cc: namhyung@kernel.org
Fixes: ef60777c9abd ("perf: Optimize the perf_output() path by removing IRQ-disables")
Link: http://lkml.kernel.org/r/20190517115418.309516009@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/events/ring_buffer.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/kernel/events/ring_buffer.c b/kernel/events/ring_buffer.c
index fde853270c09..aef2af80a927 100644
--- a/kernel/events/ring_buffer.c
+++ b/kernel/events/ring_buffer.c
@@ -49,6 +49,15 @@ static void perf_output_put_handle(struct perf_output_handle *handle)
 	unsigned long head;
 
 again:
+	/*
+	 * In order to avoid publishing a head value that goes backwards,
+	 * we must ensure the load of @rb->head happens after we've
+	 * incremented @rb->nest.
+	 *
+	 * Otherwise we can observe a @rb->head value before one published
+	 * by an IRQ/NMI happening between the load and the increment.
+	 */
+	barrier();
 	head = local_read(&rb->head);
 
 	/*
-- 
2.20.1

[PATCH 4.14 21/45] perf/ring-buffer: Always use {READ,WRITE}_ONCE() for rb->user_page data

[Greg Kroah-Hartman]

[ Upstream commit 4d839dd9e4356bbacf3eb0ab13a549b83b008c21 ]

We must use {READ,WRITE}_ONCE() on rb->user_page data such that
concurrent usage will see whole values. A few key sites were missing
this.

Suggested-by: Yabin Cui <yabinc@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: acme@kernel.org
Cc: mark.rutland@arm.com
Cc: namhyung@kernel.org
Fixes: 7b732a750477 ("perf_counter: new output ABI - part 1")
Link: http://lkml.kernel.org/r/20190517115418.394192145@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/events/ring_buffer.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/kernel/events/ring_buffer.c b/kernel/events/ring_buffer.c
index aef2af80a927..f3a69a4f0d57 100644
--- a/kernel/events/ring_buffer.c
+++ b/kernel/events/ring_buffer.c
@@ -101,7 +101,7 @@ static void perf_output_put_handle(struct perf_output_handle *handle)
 	 * See perf_output_begin().
 	 */
 	smp_wmb(); /* B, matches C */
-	rb->user_page->data_head = head;
+	WRITE_ONCE(rb->user_page->data_head, head);
 
 	/*
 	 * We must publish the head before decrementing the nest count,
@@ -489,7 +489,7 @@ void perf_aux_output_end(struct perf_output_handle *handle, unsigned long size)
 		                     handle->aux_flags);
 	}
 
-	rb->user_page->aux_head = rb->aux_head;
+	WRITE_ONCE(rb->user_page->aux_head, rb->aux_head);
 	if (rb_need_aux_wakeup(rb))
 		wakeup = true;
 
@@ -520,7 +520,7 @@ int perf_aux_output_skip(struct perf_output_handle *handle, unsigned long size)
 
 	rb->aux_head += size;
 
-	rb->user_page->aux_head = rb->aux_head;
+	WRITE_ONCE(rb->user_page->aux_head, rb->aux_head);
 	if (rb_need_aux_wakeup(rb)) {
 		perf_output_wakeup(handle);
 		handle->wakeup = rb->aux_wakeup + rb->aux_watermark;
-- 
2.20.1

[PATCH 4.14 22/45] gpio: fix gpio-adp5588 build errors

[Greg Kroah-Hartman]

[ Upstream commit e9646f0f5bb62b7d43f0968f39d536cfe7123b53 ]

The gpio-adp5588 driver uses interfaces that are provided by
GPIOLIB_IRQCHIP, so select that symbol in its Kconfig entry.

Fixes these build errors:

../drivers/gpio/gpio-adp5588.c: In function ‘adp5588_irq_handler’:
../drivers/gpio/gpio-adp5588.c:266:26: error: ‘struct gpio_chip’ has no member named ‘irq’
            dev->gpio_chip.irq.domain, gpio));
                          ^
../drivers/gpio/gpio-adp5588.c: In function ‘adp5588_irq_setup’:
../drivers/gpio/gpio-adp5588.c:298:2: error: implicit declaration of function ‘gpiochip_irqchip_add_nested’ [-Werror=implicit-function-declaration]
  ret = gpiochip_irqchip_add_nested(&dev->gpio_chip,
  ^
../drivers/gpio/gpio-adp5588.c:307:2: error: implicit declaration of function ‘gpiochip_set_nested_irqchip’ [-Werror=implicit-function-declaration]
  gpiochip_set_nested_irqchip(&dev->gpio_chip,
  ^

Fixes: 459773ae8dbb ("gpio: adp5588-gpio: support interrupt controller")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: linux-gpio@vger.kernel.org
Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpio/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 3f80f167ed56..2357d2f73c1a 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -712,6 +712,7 @@ config GPIO_ADP5588
 config GPIO_ADP5588_IRQ
 	bool "Interrupt controller support for ADP5588"
 	depends on GPIO_ADP5588=y
+	select GPIOLIB_IRQCHIP
 	help
 	  Say yes here to enable the adp5588 to be used as an interrupt
 	  controller. It requires the driver to be built in the kernel.
-- 
2.20.1

[PATCH 4.14 23/45] net: tulip: de4x5: Drop redundant MODULE_DEVICE_TABLE()

[Greg Kroah-Hartman]

[ Upstream commit 3e66b7cc50ef921121babc91487e1fb98af1ba6e ]

Building with Clang reports the redundant use of MODULE_DEVICE_TABLE():

drivers/net/ethernet/dec/tulip/de4x5.c:2110:1: error: redefinition of '__mod_eisa__de4x5_eisa_ids_device_table'
MODULE_DEVICE_TABLE(eisa, de4x5_eisa_ids);
^
./include/linux/module.h:229:21: note: expanded from macro 'MODULE_DEVICE_TABLE'
extern typeof(name) __mod_##type##__##name##_device_table               \
                    ^
<scratch space>:90:1: note: expanded from here
__mod_eisa__de4x5_eisa_ids_device_table
^
drivers/net/ethernet/dec/tulip/de4x5.c:2100:1: note: previous definition is here
MODULE_DEVICE_TABLE(eisa, de4x5_eisa_ids);
^
./include/linux/module.h:229:21: note: expanded from macro 'MODULE_DEVICE_TABLE'
extern typeof(name) __mod_##type##__##name##_device_table               \
                    ^
<scratch space>:85:1: note: expanded from here
__mod_eisa__de4x5_eisa_ids_device_table
^

This drops the one further from the table definition to match the common
use of MODULE_DEVICE_TABLE().

Fixes: 07563c711fbc ("EISA bus MODALIAS attributes support")
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/dec/tulip/de4x5.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/net/ethernet/dec/tulip/de4x5.c b/drivers/net/ethernet/dec/tulip/de4x5.c
index 0affee9c8aa2..0b1e7a96ff49 100644
--- a/drivers/net/ethernet/dec/tulip/de4x5.c
+++ b/drivers/net/ethernet/dec/tulip/de4x5.c
@@ -2108,7 +2108,6 @@ static struct eisa_driver de4x5_eisa_driver = {
 		.remove  = de4x5_eisa_remove,
         }
 };
-MODULE_DEVICE_TABLE(eisa, de4x5_eisa_ids);
 #endif
 
 #ifdef CONFIG_PCI
-- 
2.20.1

[PATCH 4.14 24/45] net: aquantia: fix LRO with FCS error

[Greg Kroah-Hartman]

[ Upstream commit eaeb3b7494ba9159323814a8ce8af06a9277d99b ]

Driver stops producing skbs on ring if a packet with FCS error
was coalesced into LRO session. Ring gets hang forever.

Thats a logical error in driver processing descriptors:
When rx_stat indicates MAC Error, next pointer and eop flags
are not filled. This confuses driver so it waits for descriptor 0
to be filled by HW.

Solution is fill next pointer and eop flag even for packets with FCS error.

Fixes: bab6de8fd180b ("net: ethernet: aquantia: Atlantic A0 and B0 specific functions.")
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../aquantia/atlantic/hw_atl/hw_atl_b0.c      | 61 ++++++++++---------
 1 file changed, 32 insertions(+), 29 deletions(-)

diff --git a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c
index f4b3554b0b67..236325f48ec9 100644
--- a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c
+++ b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c
@@ -683,38 +683,41 @@ static int hw_atl_b0_hw_ring_rx_receive(struct aq_hw_s *self,
 		if (is_err || rxd_wb->type & 0x1000U) {
 			/* status error or DMA error */
 			buff->is_error = 1U;
-		} else {
-			if (self->aq_nic_cfg->is_rss) {
-				/* last 4 byte */
-				u16 rss_type = rxd_wb->type & 0xFU;
-
-				if (rss_type && rss_type < 0x8U) {
-					buff->is_hash_l4 = (rss_type == 0x4 ||
-					rss_type == 0x5);
-					buff->rss_hash = rxd_wb->rss_hash;
-				}
+		}
+		if (self->aq_nic_cfg->is_rss) {
+			/* last 4 byte */
+			u16 rss_type = rxd_wb->type & 0xFU;
+
+			if (rss_type && rss_type < 0x8U) {
+				buff->is_hash_l4 = (rss_type == 0x4 ||
+				rss_type == 0x5);
+				buff->rss_hash = rxd_wb->rss_hash;
 			}
+		}
 
-			if (HW_ATL_B0_RXD_WB_STAT2_EOP & rxd_wb->status) {
-				buff->len = rxd_wb->pkt_len %
-					AQ_CFG_RX_FRAME_MAX;
-				buff->len = buff->len ?
-					buff->len : AQ_CFG_RX_FRAME_MAX;
-				buff->next = 0U;
-				buff->is_eop = 1U;
+		if (HW_ATL_B0_RXD_WB_STAT2_EOP & rxd_wb->status) {
+			buff->len = rxd_wb->pkt_len %
+				AQ_CFG_RX_FRAME_MAX;
+			buff->len = buff->len ?
+				buff->len : AQ_CFG_RX_FRAME_MAX;
+			buff->next = 0U;
+			buff->is_eop = 1U;
+		} else {
+			buff->len =
+				rxd_wb->pkt_len > AQ_CFG_RX_FRAME_MAX ?
+				AQ_CFG_RX_FRAME_MAX : rxd_wb->pkt_len;
+
+			if (HW_ATL_B0_RXD_WB_STAT2_RSCCNT &
+				rxd_wb->status) {
+				/* LRO */
+				buff->next = rxd_wb->next_desc_ptr;
+				++ring->stats.rx.lro_packets;
 			} else {
-				if (HW_ATL_B0_RXD_WB_STAT2_RSCCNT &
-					rxd_wb->status) {
-					/* LRO */
-					buff->next = rxd_wb->next_desc_ptr;
-					++ring->stats.rx.lro_packets;
-				} else {
-					/* jumbo */
-					buff->next =
-						aq_ring_next_dx(ring,
-								ring->hw_head);
-					++ring->stats.rx.jumbo_packets;
-				}
+				/* jumbo */
+				buff->next =
+					aq_ring_next_dx(ring,
+							ring->hw_head);
+				++ring->stats.rx.jumbo_packets;
 			}
 		}
 	}
-- 
2.20.1

[PATCH 4.14 25/45] i2c: dev: fix potential memory leak in i2cdev_ioctl_rdwr

[Greg Kroah-Hartman]

[ Upstream commit a0692f0eef91354b62c2b4c94954536536be5425 ]

If I2C_M_RECV_LEN check failed, msgs[i].buf allocated by memdup_user
will not be freed. Pump index up so it will be freed.

Fixes: 838bfa6049fb ("i2c-dev: Add support for I2C_M_RECV_LEN")
Signed-off-by: Yingjoe Chen <yingjoe.chen@mediatek.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/i2c/i2c-dev.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/i2c/i2c-dev.c b/drivers/i2c/i2c-dev.c
index 00e8e675cbeb..eaa312bc3a3c 100644
--- a/drivers/i2c/i2c-dev.c
+++ b/drivers/i2c/i2c-dev.c
@@ -297,6 +297,7 @@ static noinline int i2cdev_ioctl_rdwr(struct i2c_client *client,
 			    rdwr_pa[i].buf[0] < 1 ||
 			    rdwr_pa[i].len < rdwr_pa[i].buf[0] +
 					     I2C_SMBUS_BLOCK_MAX) {
+				i++;
 				res = -EINVAL;
 				break;
 			}
-- 
2.20.1

[PATCH 4.14 26/45] ALSA: hda - Force polling mode on CNL for fixing codec communication

[Greg Kroah-Hartman]

[ Upstream commit fa763f1b2858752e6150ffff46886a1b7faffc82 ]

We observed the same issue as reported by commit a8d7bde23e7130686b7662
("ALSA: hda - Force polling mode on CFL for fixing codec communication")
We don't have a better solution. So apply the same workaround to CNL.

Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/pci/hda/hda_intel.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index 65fb1e7edb9c..d349f69ef03c 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -376,6 +376,7 @@ enum {
 
 #define IS_BXT(pci) ((pci)->vendor == 0x8086 && (pci)->device == 0x5a98)
 #define IS_CFL(pci) ((pci)->vendor == 0x8086 && (pci)->device == 0xa348)
+#define IS_CNL(pci) ((pci)->vendor == 0x8086 && (pci)->device == 0x9dc8)
 
 static char *driver_short_names[] = {
 	[AZX_DRIVER_ICH] = "HDA Intel",
@@ -1751,8 +1752,8 @@ static int azx_create(struct snd_card *card, struct pci_dev *pci,
 	else
 		chip->bdl_pos_adj = bdl_pos_adj[dev];
 
-	/* Workaround for a communication error on CFL (bko#199007) */
-	if (IS_CFL(pci))
+	/* Workaround for a communication error on CFL (bko#199007) and CNL */
+	if (IS_CFL(pci) || IS_CNL(pci))
 		chip->polling_mode = 1;
 
 	err = azx_bus_init(chip, model[dev], &pci_hda_io_ops);
-- 
2.20.1

[PATCH 4.14 27/45] configfs: Fix use-after-free when accessing sd->s_dentry

[Greg Kroah-Hartman]

[ Upstream commit f6122ed2a4f9c9c1c073ddf6308d1b2ac10e0781 ]

In the vfs_statx() context, during path lookup, the dentry gets
added to sd->s_dentry via configfs_attach_attr(). In the end,
vfs_statx() kills the dentry by calling path_put(), which invokes
configfs_d_iput(). Ideally, this dentry must be removed from
sd->s_dentry but it doesn't if the sd->s_count >= 3. As a result,
sd->s_dentry is holding reference to a stale dentry pointer whose
memory is already freed up. This results in use-after-free issue,
when this stale sd->s_dentry is accessed later in
configfs_readdir() path.

This issue can be easily reproduced, by running the LTP test case -
sh fs_racer_file_list.sh /config
(https://github.com/linux-test-project/ltp/blob/master/testcases/kernel/fs/racer/fs_racer_file_list.sh)

Fixes: 76ae281f6307 ('configfs: fix race between dentry put and lookup')
Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/configfs/dir.c | 14 ++++++--------
 1 file changed, 6 insertions(+), 8 deletions(-)

diff --git a/fs/configfs/dir.c b/fs/configfs/dir.c
index d7955dc56737..a1985a9ad2d6 100644
--- a/fs/configfs/dir.c
+++ b/fs/configfs/dir.c
@@ -58,15 +58,13 @@ static void configfs_d_iput(struct dentry * dentry,
 	if (sd) {
 		/* Coordinate with configfs_readdir */
 		spin_lock(&configfs_dirent_lock);
-		/* Coordinate with configfs_attach_attr where will increase
-		 * sd->s_count and update sd->s_dentry to new allocated one.
-		 * Only set sd->dentry to null when this dentry is the only
-		 * sd owner.
-		 * If not do so, configfs_d_iput may run just after
-		 * configfs_attach_attr and set sd->s_dentry to null
-		 * even it's still in use.
+		/*
+		 * Set sd->s_dentry to null only when this dentry is the one
+		 * that is going to be killed.  Otherwise configfs_d_iput may
+		 * run just after configfs_attach_attr and set sd->s_dentry to
+		 * NULL even it's still in use.
 		 */
-		if (atomic_read(&sd->s_count) <= 2)
+		if (sd->s_dentry == dentry)
 			sd->s_dentry = NULL;
 
 		spin_unlock(&configfs_dirent_lock);
-- 
2.20.1

[PATCH 4.14 28/45] perf data: Fix strncat may truncate build failure with recent gcc

[Greg Kroah-Hartman]

[ Upstream commit 97acec7df172cd1e450f81f5e293c0aa145a2797 ]

This strncat() is safe because the buffer was allocated with zalloc(),
however gcc doesn't know that. Since the string always has 4 non-null
bytes, just use memcpy() here.

    CC       /home/shawn/linux/tools/perf/util/data-convert-bt.o
  In file included from /usr/include/string.h:494,
                   from /home/shawn/linux/tools/lib/traceevent/event-parse.h:27,
                   from util/data-convert-bt.c:22:
  In function ‘strncat’,
      inlined from ‘string_set_value’ at util/data-convert-bt.c:274:4:
  /usr/include/powerpc64le-linux-gnu/bits/string_fortified.h:136:10: error: ‘__builtin_strncat’ output may be truncated copying 4 bytes from a string of length 4 [-Werror=stringop-truncation]
    136 |   return __builtin___strncat_chk (__dest, __src, __len, __bos (__dest));
        |          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Signed-off-by: Shawn Landden <shawn@git.icu>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
LPU-Reference: 20190518183238.10954-1-shawn@git.icu
Link: https://lkml.kernel.org/n/tip-289f1jice17ta7tr3tstm9jm@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/util/data-convert-bt.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/perf/util/data-convert-bt.c b/tools/perf/util/data-convert-bt.c
index 2346cecb8ea2..5131304ea3a8 100644
--- a/tools/perf/util/data-convert-bt.c
+++ b/tools/perf/util/data-convert-bt.c
@@ -271,7 +271,7 @@ static int string_set_value(struct bt_ctf_field *field, const char *string)
 				if (i > 0)
 					strncpy(buffer, string, i);
 			}
-			strncat(buffer + p, numstr, 4);
+			memcpy(buffer + p, numstr, 4);
 			p += 3;
 		}
 	}
-- 
2.20.1

[PATCH 4.14 29/45] perf record: Fix s390 missing module symbol and warning for non-root users

[Greg Kroah-Hartman]

[ Upstream commit 6738028dd57df064b969d8392c943ef3b3ae705d ]

Command 'perf record' and 'perf report' on a system without kernel
debuginfo packages uses /proc/kallsyms and /proc/modules to find
addresses for kernel and module symbols. On x86 this works for root and
non-root users.

On s390, when invoked as non-root user, many of the following warnings
are shown and module symbols are missing:

    proc/{kallsyms,modules} inconsistency while looking for
        "[sha1_s390]" module!

Command 'perf record' creates a list of module start addresses by
parsing the output of /proc/modules and creates a PERF_RECORD_MMAP
record for the kernel and each module. The following function call
sequence is executed:

  machine__create_kernel_maps
    machine__create_module
      modules__parse
        machine__create_module --> for each line in /proc/modules
          arch__fix_module_text_start

Function arch__fix_module_text_start() is s390 specific. It opens
file /sys/module/<name>/sections/.text to extract the module's .text
section start address. On s390 the module loader prepends a header
before the first section, whereas on x86 the module's text section
address is identical the the module's load address.

However module section files are root readable only. For non-root the
read operation fails and machine__create_module() returns an error.
Command perf record does not generate any PERF_RECORD_MMAP record
for loaded modules. Later command perf report complains about missing
module maps.

To fix this function arch__fix_module_text_start() always returns
success. For root users there is no change, for non-root users
the module's load address is used as module's text start address
(the prepended header then counts as part of the text section).

This enable non-root users to use module symbols and avoid the
warning when perf report is executed.

Output before:

  [tmricht@m83lp54 perf]$ ./perf report -D | fgrep MMAP
  0 0x168 [0x50]: PERF_RECORD_MMAP ... x [kernel.kallsyms]_text

Output after:

  [tmricht@m83lp54 perf]$ ./perf report -D | fgrep MMAP
  0 0x168 [0x50]: PERF_RECORD_MMAP ... x [kernel.kallsyms]_text
  0 0x1b8 [0x98]: PERF_RECORD_MMAP ... x /lib/modules/.../autofs4.ko.xz
  0 0x250 [0xa8]: PERF_RECORD_MMAP ... x /lib/modules/.../sha_common.ko.xz
  0 0x2f8 [0x98]: PERF_RECORD_MMAP ... x /lib/modules/.../des_generic.ko.xz

Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Link: http://lkml.kernel.org/r/20190522144601.50763-4-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/arch/s390/util/machine.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/tools/perf/arch/s390/util/machine.c b/tools/perf/arch/s390/util/machine.c
index 0b2054007314..a19690a17291 100644
--- a/tools/perf/arch/s390/util/machine.c
+++ b/tools/perf/arch/s390/util/machine.c
@@ -5,16 +5,19 @@
 #include "util.h"
 #include "machine.h"
 #include "api/fs/fs.h"
+#include "debug.h"
 
 int arch__fix_module_text_start(u64 *start, const char *name)
 {
+	u64 m_start = *start;
 	char path[PATH_MAX];
 
 	snprintf(path, PATH_MAX, "module/%.*s/sections/.text",
 				(int)strlen(name) - 2, name + 1);
-
-	if (sysfs__read_ull(path, (unsigned long long *)start) < 0)
-		return -1;
+	if (sysfs__read_ull(path, (unsigned long long *)start) < 0) {
+		pr_debug2("Using module %s start:%#lx\n", path, m_start);
+		*start = m_start;
+	}
 
 	return 0;
 }
-- 
2.20.1

[PATCH 4.14 30/45] ia64: fix build errors by exporting paddr_to_nid()

[Greg Kroah-Hartman]

[ Upstream commit 9a626c4a6326da4433a0d4d4a8a7d1571caf1ed3 ]

Fix build errors on ia64 when DISCONTIGMEM=y and NUMA=y by
exporting paddr_to_nid().

Fixes these build errors:

ERROR: "paddr_to_nid" [sound/core/snd-pcm.ko] undefined!
ERROR: "paddr_to_nid" [net/sunrpc/sunrpc.ko] undefined!
ERROR: "paddr_to_nid" [fs/cifs/cifs.ko] undefined!
ERROR: "paddr_to_nid" [drivers/video/fbdev/core/fb.ko] undefined!
ERROR: "paddr_to_nid" [drivers/usb/mon/usbmon.ko] undefined!
ERROR: "paddr_to_nid" [drivers/usb/core/usbcore.ko] undefined!
ERROR: "paddr_to_nid" [drivers/md/raid1.ko] undefined!
ERROR: "paddr_to_nid" [drivers/md/dm-mod.ko] undefined!
ERROR: "paddr_to_nid" [drivers/md/dm-crypt.ko] undefined!
ERROR: "paddr_to_nid" [drivers/md/dm-bufio.ko] undefined!
ERROR: "paddr_to_nid" [drivers/ide/ide-core.ko] undefined!
ERROR: "paddr_to_nid" [drivers/ide/ide-cd_mod.ko] undefined!
ERROR: "paddr_to_nid" [drivers/gpu/drm/drm.ko] undefined!
ERROR: "paddr_to_nid" [drivers/char/agp/agpgart.ko] undefined!
ERROR: "paddr_to_nid" [drivers/block/nbd.ko] undefined!
ERROR: "paddr_to_nid" [drivers/block/loop.ko] undefined!
ERROR: "paddr_to_nid" [drivers/block/brd.ko] undefined!
ERROR: "paddr_to_nid" [crypto/ccm.ko] undefined!

Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: linux-ia64@vger.kernel.org
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/ia64/mm/numa.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/ia64/mm/numa.c b/arch/ia64/mm/numa.c
index aa19b7ac8222..476c7b4be378 100644
--- a/arch/ia64/mm/numa.c
+++ b/arch/ia64/mm/numa.c
@@ -49,6 +49,7 @@ paddr_to_nid(unsigned long paddr)
 
 	return (i < num_node_memblks) ? node_memblk[i].nid : (num_node_memblks ? -1 : 0);
 }
+EXPORT_SYMBOL(paddr_to_nid);
 
 #if defined(CONFIG_SPARSEMEM) && defined(CONFIG_NUMA)
 /*
-- 
2.20.1

[PATCH 4.14 31/45] KVM: PPC: Book3S: Use new mutex to synchronize access to rtas token list

[Greg Kroah-Hartman]

[ Upstream commit 1659e27d2bc1ef47b6d031abe01b467f18cb72d9 ]

Currently the Book 3S KVM code uses kvm->lock to synchronize access
to the kvm->arch.rtas_tokens list.  Because this list is scanned
inside kvmppc_rtas_hcall(), which is called with the vcpu mutex held,
taking kvm->lock cause a lock inversion problem, which could lead to
a deadlock.

To fix this, we add a new mutex, kvm->arch.rtas_token_lock, which nests
inside the vcpu mutexes, and use that instead of kvm->lock when
accessing the rtas token list.

This removes the lockdep_assert_held() in kvmppc_rtas_tokens_free().
At this point we don't hold the new mutex, but that is OK because
kvmppc_rtas_tokens_free() is only called when the whole VM is being
destroyed, and at that point nothing can be looking up a token in
the list.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/include/asm/kvm_host.h |  1 +
 arch/powerpc/kvm/book3s.c           |  1 +
 arch/powerpc/kvm/book3s_rtas.c      | 14 ++++++--------
 3 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/powerpc/include/asm/kvm_host.h b/arch/powerpc/include/asm/kvm_host.h
index e3ba58f64c3d..5070b34b12fd 100644
--- a/arch/powerpc/include/asm/kvm_host.h
+++ b/arch/powerpc/include/asm/kvm_host.h
@@ -296,6 +296,7 @@ struct kvm_arch {
 #ifdef CONFIG_PPC_BOOK3S_64
 	struct list_head spapr_tce_tables;
 	struct list_head rtas_tokens;
+	struct mutex rtas_token_lock;
 	DECLARE_BITMAP(enabled_hcalls, MAX_HCALL_OPCODE/4 + 1);
 #endif
 #ifdef CONFIG_KVM_MPIC
diff --git a/arch/powerpc/kvm/book3s.c b/arch/powerpc/kvm/book3s.c
index 72d977e30952..d38280b01ef0 100644
--- a/arch/powerpc/kvm/book3s.c
+++ b/arch/powerpc/kvm/book3s.c
@@ -836,6 +836,7 @@ int kvmppc_core_init_vm(struct kvm *kvm)
 #ifdef CONFIG_PPC64
 	INIT_LIST_HEAD_RCU(&kvm->arch.spapr_tce_tables);
 	INIT_LIST_HEAD(&kvm->arch.rtas_tokens);
+	mutex_init(&kvm->arch.rtas_token_lock);
 #endif
 
 	return kvm->arch.kvm_ops->init_vm(kvm);
diff --git a/arch/powerpc/kvm/book3s_rtas.c b/arch/powerpc/kvm/book3s_rtas.c
index 2d3b2b1cc272..8f2355138f80 100644
--- a/arch/powerpc/kvm/book3s_rtas.c
+++ b/arch/powerpc/kvm/book3s_rtas.c
@@ -146,7 +146,7 @@ static int rtas_token_undefine(struct kvm *kvm, char *name)
 {
 	struct rtas_token_definition *d, *tmp;
 
-	lockdep_assert_held(&kvm->lock);
+	lockdep_assert_held(&kvm->arch.rtas_token_lock);
 
 	list_for_each_entry_safe(d, tmp, &kvm->arch.rtas_tokens, list) {
 		if (rtas_name_matches(d->handler->name, name)) {
@@ -167,7 +167,7 @@ static int rtas_token_define(struct kvm *kvm, char *name, u64 token)
 	bool found;
 	int i;
 
-	lockdep_assert_held(&kvm->lock);
+	lockdep_assert_held(&kvm->arch.rtas_token_lock);
 
 	list_for_each_entry(d, &kvm->arch.rtas_tokens, list) {
 		if (d->token == token)
@@ -206,14 +206,14 @@ int kvm_vm_ioctl_rtas_define_token(struct kvm *kvm, void __user *argp)
 	if (copy_from_user(&args, argp, sizeof(args)))
 		return -EFAULT;
 
-	mutex_lock(&kvm->lock);
+	mutex_lock(&kvm->arch.rtas_token_lock);
 
 	if (args.token)
 		rc = rtas_token_define(kvm, args.name, args.token);
 	else
 		rc = rtas_token_undefine(kvm, args.name);
 
-	mutex_unlock(&kvm->lock);
+	mutex_unlock(&kvm->arch.rtas_token_lock);
 
 	return rc;
 }
@@ -245,7 +245,7 @@ int kvmppc_rtas_hcall(struct kvm_vcpu *vcpu)
 	orig_rets = args.rets;
 	args.rets = &args.args[be32_to_cpu(args.nargs)];
 
-	mutex_lock(&vcpu->kvm->lock);
+	mutex_lock(&vcpu->kvm->arch.rtas_token_lock);
 
 	rc = -ENOENT;
 	list_for_each_entry(d, &vcpu->kvm->arch.rtas_tokens, list) {
@@ -256,7 +256,7 @@ int kvmppc_rtas_hcall(struct kvm_vcpu *vcpu)
 		}
 	}
 
-	mutex_unlock(&vcpu->kvm->lock);
+	mutex_unlock(&vcpu->kvm->arch.rtas_token_lock);
 
 	if (rc == 0) {
 		args.rets = orig_rets;
@@ -282,8 +282,6 @@ void kvmppc_rtas_tokens_free(struct kvm *kvm)
 {
 	struct rtas_token_definition *d, *tmp;
 
-	lockdep_assert_held(&kvm->lock);
-
 	list_for_each_entry_safe(d, tmp, &kvm->arch.rtas_tokens, list) {
 		list_del(&d->list);
 		kfree(d);
-- 
2.20.1

[PATCH 4.14 32/45] KVM: PPC: Book3S HV: Dont take kvm->lock around kvm_for_each_vcpu

[Greg Kroah-Hartman]

[ Upstream commit 5a3f49364c3ffa1107bd88f8292406e98c5d206c ]

Currently the HV KVM code takes the kvm->lock around calls to
kvm_for_each_vcpu() and kvm_get_vcpu_by_id() (which can call
kvm_for_each_vcpu() internally).  However, that leads to a lock
order inversion problem, because these are called in contexts where
the vcpu mutex is held, but the vcpu mutexes nest within kvm->lock
according to Documentation/virtual/kvm/locking.txt.  Hence there
is a possibility of deadlock.

To fix this, we simply don't take the kvm->lock mutex around these
calls.  This is safe because the implementations of kvm_for_each_vcpu()
and kvm_get_vcpu_by_id() have been designed to be able to be called
locklessly.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/kvm/book3s_hv.c | 9 +--------
 1 file changed, 1 insertion(+), 8 deletions(-)

diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c
index 58746328b9bd..3b7488fce3db 100644
--- a/arch/powerpc/kvm/book3s_hv.c
+++ b/arch/powerpc/kvm/book3s_hv.c
@@ -392,12 +392,7 @@ static void kvmppc_dump_regs(struct kvm_vcpu *vcpu)
 
 static struct kvm_vcpu *kvmppc_find_vcpu(struct kvm *kvm, int id)
 {
-	struct kvm_vcpu *ret;
-
-	mutex_lock(&kvm->lock);
-	ret = kvm_get_vcpu_by_id(kvm, id);
-	mutex_unlock(&kvm->lock);
-	return ret;
+	return kvm_get_vcpu_by_id(kvm, id);
 }
 
 static void init_vpa(struct kvm_vcpu *vcpu, struct lppaca *vpa)
@@ -1258,7 +1253,6 @@ static void kvmppc_set_lpcr(struct kvm_vcpu *vcpu, u64 new_lpcr,
 	struct kvmppc_vcore *vc = vcpu->arch.vcore;
 	u64 mask;
 
-	mutex_lock(&kvm->lock);
 	spin_lock(&vc->lock);
 	/*
 	 * If ILE (interrupt little-endian) has changed, update the
@@ -1298,7 +1292,6 @@ static void kvmppc_set_lpcr(struct kvm_vcpu *vcpu, u64 new_lpcr,
 		mask &= 0xFFFFFFFF;
 	vc->lpcr = (vc->lpcr & ~mask) | (new_lpcr & mask);
 	spin_unlock(&vc->lock);
-	mutex_unlock(&kvm->lock);
 }
 
 static int kvmppc_get_one_reg_hv(struct kvm_vcpu *vcpu, u64 id,
-- 
2.20.1

[PATCH 4.14 33/45] net: sh_eth: fix mdio access in sh_eth_close() for R-Car Gen2 and RZ/A1 SoCs

[Greg Kroah-Hartman]

[ Upstream commit 315ca92dd863fecbffc0bb52ae0ac11e0398726a ]

The sh_eth_close() resets the MAC and then calls phy_stop()
so that mdio read access result is incorrect without any error
according to kernel trace like below:

ifconfig-216   [003] .n..   109.133124: mdio_access: ee700000.ethernet-ffffffff read  phy:0x01 reg:0x00 val:0xffff

According to the hardware manual, the RMII mode should be set to 1
before operation the Ethernet MAC. However, the previous code was not
set to 1 after the driver issued the soft_reset in sh_eth_dev_exit()
so that the mdio read access result seemed incorrect. To fix the issue,
this patch adds a condition and set the RMII mode register in
sh_eth_dev_exit() for R-Car Gen2 and RZ/A1 SoCs.

Note that when I have tried to move the sh_eth_dev_exit() calling
after phy_stop() on sh_eth_close(), but it gets worse (kernel panic
happened and it seems that a register is accessed while the clock is
off).

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/renesas/sh_eth.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c
index abfb9faadbc4..9b1906a65e11 100644
--- a/drivers/net/ethernet/renesas/sh_eth.c
+++ b/drivers/net/ethernet/renesas/sh_eth.c
@@ -1458,6 +1458,10 @@ static void sh_eth_dev_exit(struct net_device *ndev)
 	sh_eth_get_stats(ndev);
 	sh_eth_reset(ndev);
 
+	/* Set the RMII mode again if required */
+	if (mdp->cd->rmiimode)
+		sh_eth_write(ndev, 0x1, RMIIMODE);
+
 	/* Set MAC address again */
 	update_mac_address(ndev);
 }
-- 
2.20.1

[PATCH 4.14 34/45] net: phy: dp83867: Set up RGMII TX delay

[Greg Kroah-Hartman]

[ Upstream commit 2b892649254fec01678c64f16427622b41fa27f4 ]

PHY_INTERFACE_MODE_RGMII_RXID is less then TXID
so code to set tx delay is never called.

Fixes: 2a10154abcb75 ("net: phy: dp83867: Add TI dp83867 phy")
Signed-off-by: Max Uvarov <muvarov@gmail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/phy/dp83867.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/net/phy/dp83867.c b/drivers/net/phy/dp83867.c
index c1ab976cc800..12b09e6e03ba 100644
--- a/drivers/net/phy/dp83867.c
+++ b/drivers/net/phy/dp83867.c
@@ -249,10 +249,8 @@ static int dp83867_config_init(struct phy_device *phydev)
 		ret = phy_write(phydev, MII_DP83867_PHYCTRL, val);
 		if (ret)
 			return ret;
-	}
 
-	if ((phydev->interface >= PHY_INTERFACE_MODE_RGMII_ID) &&
-	    (phydev->interface <= PHY_INTERFACE_MODE_RGMII_RXID)) {
+		/* Set up RGMII delays */
 		val = phy_read_mmd(phydev, DP83867_DEVADDR, DP83867_RGMIICTL);
 
 		if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID)
-- 
2.20.1

[PATCH 4.14 35/45] scsi: libcxgbi: add a check for NULL pointer in cxgbi_check_route()

[Greg Kroah-Hartman]

[ Upstream commit cc555759117e8349088e0c5d19f2f2a500bafdbd ]

ip_dev_find() can return NULL so add a check for NULL pointer.

Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/cxgbi/libcxgbi.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/scsi/cxgbi/libcxgbi.c b/drivers/scsi/cxgbi/libcxgbi.c
index 512c8f1ea5b0..902f5e03ec94 100644
--- a/drivers/scsi/cxgbi/libcxgbi.c
+++ b/drivers/scsi/cxgbi/libcxgbi.c
@@ -640,6 +640,10 @@ cxgbi_check_route(struct sockaddr *dst_addr, int ifindex)
 
 	if (ndev->flags & IFF_LOOPBACK) {
 		ndev = ip_dev_find(&init_net, daddr->sin_addr.s_addr);
+		if (!ndev) {
+			err = -ENETUNREACH;
+			goto rel_neigh;
+		}
 		mtu = ndev->mtu;
 		pr_info("rt dev %s, loopback -> %s, mtu %u.\n",
 			n->dev->name, ndev->name, mtu);
-- 
2.20.1

[PATCH 4.14 36/45] scsi: smartpqi: properly set both the DMA mask and the coherent DMA mask

[Greg Kroah-Hartman]

[ Upstream commit 1d94f06e7f5df4064ef336b7b710f50143b64a53 ]

When SME is enabled, the smartpqi driver won't work on the HP DL385 G10
machine, which causes the failure of kernel boot because it fails to
allocate pqi error buffer. Please refer to the kernel log:
....
[    9.431749] usbcore: registered new interface driver uas
[    9.441524] Microsemi PQI Driver (v1.1.4-130)
[    9.442956] i40e 0000:04:00.0: fw 6.70.48768 api 1.7 nvm 10.2.5
[    9.447237] smartpqi 0000:23:00.0: Microsemi Smart Family Controller found
         Starting dracut initqueue hook...
[  OK  ] Started Show Plymouth Boot Scre[    9.471654] Broadcom NetXtreme-C/E driver bnxt_en v1.9.1
en.
[  OK  ] Started Forward Password Requests to Plymouth Directory Watch.
[[0;[    9.487108] smartpqi 0000:23:00.0: failed to allocate PQI error buffer
....
[  139.050544] dracut-initqueue[949]: Warning: dracut-initqueue timeout - starting timeout scripts
[  139.589779] dracut-initqueue[949]: Warning: dracut-initqueue timeout - starting timeout scripts

Basically, the fact that the coherent DMA mask value wasn't set caused the
driver to fall back to SWIOTLB when SME is active.

For correct operation, lets call the dma_set_mask_and_coherent() to
properly set the mask for both streaming and coherent, in order to inform
the kernel about the devices DMA addressing capabilities.

Signed-off-by: Lianbo Jiang <lijiang@redhat.com>
Acked-by: Don Brace <don.brace@microsemi.com>
Tested-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/smartpqi/smartpqi_init.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/smartpqi/smartpqi_init.c b/drivers/scsi/smartpqi/smartpqi_init.c
index 5ec2898d21cd..d34351c6b9af 100644
--- a/drivers/scsi/smartpqi/smartpqi_init.c
+++ b/drivers/scsi/smartpqi/smartpqi_init.c
@@ -6392,7 +6392,7 @@ static int pqi_pci_init(struct pqi_ctrl_info *ctrl_info)
 	else
 		mask = DMA_BIT_MASK(32);
 
-	rc = dma_set_mask(&ctrl_info->pci_dev->dev, mask);
+	rc = dma_set_mask_and_coherent(&ctrl_info->pci_dev->dev, mask);
 	if (rc) {
 		dev_err(&ctrl_info->pci_dev->dev, "failed to set DMA mask\n");
 		goto disable_device;
-- 
2.20.1

[PATCH 4.14 37/45] scsi: scsi_dh_alua: Fix possible null-ptr-deref

[Greg Kroah-Hartman]

[ Upstream commit 12e750bc62044de096ab9a95201213fd912b9994 ]

If alloc_workqueue fails in alua_init, it should return -ENOMEM, otherwise
it will trigger null-ptr-deref while unloading module which calls
destroy_workqueue dereference
wq->lock like this:

BUG: KASAN: null-ptr-deref in __lock_acquire+0x6b4/0x1ee0
Read of size 8 at addr 0000000000000080 by task syz-executor.0/7045

CPU: 0 PID: 7045 Comm: syz-executor.0 Tainted: G         C        5.1.0+ #28
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1
Call Trace:
 dump_stack+0xa9/0x10e
 __kasan_report+0x171/0x18d
 ? __lock_acquire+0x6b4/0x1ee0
 kasan_report+0xe/0x20
 __lock_acquire+0x6b4/0x1ee0
 lock_acquire+0xb4/0x1b0
 __mutex_lock+0xd8/0xb90
 drain_workqueue+0x25/0x290
 destroy_workqueue+0x1f/0x3f0
 __x64_sys_delete_module+0x244/0x330
 do_syscall_64+0x72/0x2a0
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: 03197b61c5ec ("scsi_dh_alua: Use workqueue for RTPG")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/device_handler/scsi_dh_alua.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/scsi/device_handler/scsi_dh_alua.c b/drivers/scsi/device_handler/scsi_dh_alua.c
index 0962fd544401..09c6a16fab93 100644
--- a/drivers/scsi/device_handler/scsi_dh_alua.c
+++ b/drivers/scsi/device_handler/scsi_dh_alua.c
@@ -1151,10 +1151,8 @@ static int __init alua_init(void)
 	int r;
 
 	kaluad_wq = alloc_workqueue("kaluad", WQ_MEM_RECLAIM, 0);
-	if (!kaluad_wq) {
-		/* Temporary failure, bypass */
-		return SCSI_DH_DEV_TEMP_BUSY;
-	}
+	if (!kaluad_wq)
+		return -ENOMEM;
 
 	r = scsi_register_device_handler(&alua_dh);
 	if (r != 0) {
-- 
2.20.1

[PATCH 4.14 38/45] scsi: libsas: delete sas port if expander discover failed

[Greg Kroah-Hartman]

[ Upstream commit 3b0541791453fbe7f42867e310e0c9eb6295364d ]

The sas_port(phy->port) allocated in sas_ex_discover_expander() will not be
deleted when the expander failed to discover. This will cause resource leak
and a further issue of kernel BUG like below:

[159785.843156]  port-2:17:29: trying to add phy phy-2:17:29 fails: it's
already part of another port
[159785.852144] ------------[ cut here  ]------------
[159785.856833] kernel BUG at drivers/scsi/scsi_transport_sas.c:1086!
[159785.863000] Internal error: Oops - BUG: 0 [#1] SMP
[159785.867866] CPU: 39 PID: 16993 Comm: kworker/u96:2 Tainted: G
W  OE     4.19.25-vhulk1901.1.0.h111.aarch64 #1
[159785.878458] Hardware name: Huawei Technologies Co., Ltd.
Hi1620EVBCS/Hi1620EVBCS, BIOS Hi1620 CS B070 1P TA 03/21/2019
[159785.889231] Workqueue: 0000:74:02.0_disco_q sas_discover_domain
[159785.895224] pstate: 40c00009 (nZcv daif +PAN +UAO)
[159785.900094] pc : sas_port_add_phy+0x188/0x1b8
[159785.904524] lr : sas_port_add_phy+0x188/0x1b8
[159785.908952] sp : ffff0001120e3b80
[159785.912341] x29: ffff0001120e3b80 x28: 0000000000000000
[159785.917727] x27: ffff802ade8f5400 x26: ffff0000681b7560
[159785.923111] x25: ffff802adf11a800 x24: ffff0000680e8000
[159785.928496] x23: ffff802ade8f5728 x22: ffff802ade8f5708
[159785.933880] x21: ffff802adea2db40 x20: ffff802ade8f5400
[159785.939264] x19: ffff802adea2d800 x18: 0000000000000010
[159785.944649] x17: 00000000821bf734 x16: ffff00006714faa0
[159785.950033] x15: ffff0000e8ab4ecf x14: 7261702079646165
[159785.955417] x13: 726c612073277469 x12: ffff00006887b830
[159785.960802] x11: ffff00006773eaa0 x10: 7968702079687020
[159785.966186] x9 : 0000000000002453 x8 : 726f702072656874
[159785.971570] x7 : 6f6e6120666f2074 x6 : ffff802bcfb21290
[159785.976955] x5 : ffff802bcfb21290 x4 : 0000000000000000
[159785.982339] x3 : ffff802bcfb298c8 x2 : 337752b234c2ab00
[159785.987723] x1 : 337752b234c2ab00 x0 : 0000000000000000
[159785.993108] Process kworker/u96:2 (pid: 16993, stack limit =
0x0000000072dae094)
[159786.000576] Call trace:
[159786.003097]  sas_port_add_phy+0x188/0x1b8
[159786.007179]  sas_ex_get_linkrate.isra.5+0x134/0x140
[159786.012130]  sas_ex_discover_expander+0x128/0x408
[159786.016906]  sas_ex_discover_dev+0x218/0x4c8
[159786.021249]  sas_ex_discover_devices+0x9c/0x1a8
[159786.025852]  sas_discover_root_expander+0x134/0x160
[159786.030802]  sas_discover_domain+0x1b8/0x1e8
[159786.035148]  process_one_work+0x1b4/0x3f8
[159786.039230]  worker_thread+0x54/0x470
[159786.042967]  kthread+0x134/0x138
[159786.046269]  ret_from_fork+0x10/0x18
[159786.049918] Code: 91322300 f0004402 91178042 97fe4c9b (d4210000)
[159786.056083] Modules linked in: hns3_enet_ut(OE) hclge(OE) hnae3(OE)
hisi_sas_test_hw(OE) hisi_sas_test_main(OE) serdes(OE)
[159786.067202] ---[ end trace 03622b9e2d99e196  ]---
[159786.071893] Kernel panic - not syncing: Fatal exception
[159786.077190] SMP: stopping secondary CPUs
[159786.081192] Kernel Offset: disabled
[159786.084753] CPU features: 0x2,a2a00a38

Fixes: 2908d778ab3e ("[SCSI] aic94xx: new driver")
Reported-by: Jian Luo <luojian5@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
CC: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/libsas/sas_expander.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c
index ffea620a147d..259ee0d3c3e6 100644
--- a/drivers/scsi/libsas/sas_expander.c
+++ b/drivers/scsi/libsas/sas_expander.c
@@ -989,6 +989,8 @@ static struct domain_device *sas_ex_discover_expander(
 		list_del(&child->dev_list_node);
 		spin_unlock_irq(&parent->port->dev_list_lock);
 		sas_put_device(child);
+		sas_port_delete(phy->port);
+		phy->port = NULL;
 		return NULL;
 	}
 	list_add_tail(&child->siblings, &parent->ex_dev.children);
-- 
2.20.1

[PATCH 4.14 39/45] mlxsw: spectrum: Prevent force of 56G

[Greg Kroah-Hartman]

[ Upstream commit 275e928f19117d22f6d26dee94548baf4041b773 ]

Force of 56G is not supported by hardware in Ethernet devices. This
configuration fails with a bad parameter error from firmware.

Add check of this case. Instead of trying to set 56G with autoneg off,
return a meaningful error.

Fixes: 56ade8fe3fe1 ("mlxsw: spectrum: Add initial support for Spectrum ASIC")
Signed-off-by: Amit Cohen <amitc@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlxsw/spectrum.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
@@ -2505,6 +2505,10 @@ mlxsw_sp_port_set_link_ksettings(struct
 	mlxsw_reg_ptys_eth_unpack(ptys_pl, &eth_proto_cap, NULL, NULL);
 
 	autoneg = cmd->base.autoneg == AUTONEG_ENABLE;
+	if (!autoneg && cmd->base.speed == SPEED_56000) {
+		netdev_err(dev, "56G not supported with autoneg off\n");
+		return -EINVAL;
+	}
 	eth_proto_new = autoneg ?
 		mlxsw_sp_to_ptys_advert_link(cmd) :
 		mlxsw_sp_to_ptys_speed(cmd->base.speed);

[PATCH 4.14 40/45] HID: wacom: Dont set tool type until were in range

[Greg Kroah-Hartman]

From: Jason Gerecke <jason.gerecke@wacom.com>

commit 2cc08800a6b9fcda7c7afbcf2da1a6e8808da725 upstream.

The serial number and tool type information that is reported by the tablet
while a pen is merely "in prox" instead of fully "in range" can be stale
and cause us to report incorrect tool information. Serial number, tool
type, and other information is only valid once the pen comes fully in range
so we should be careful to not use this information until that point.

In particular, this issue may cause the driver to incorectly report
BTN_TOOL_RUBBER after switching from the eraser tool back to the pen.

Fixes: a48324de6d4d ("HID: wacom: Bluetooth IRQ for Intuos Pro should handle prox/range")
Cc: <stable@vger.kernel.org> # 4.11+
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Aaron Armstrong Skomra <aaron.skomra@wacom.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/hid/wacom_wac.c |   17 ++++++++++++++++-
 1 file changed, 16 insertions(+), 1 deletion(-)

--- a/drivers/hid/wacom_wac.c
+++ b/drivers/hid/wacom_wac.c
@@ -1225,13 +1225,13 @@ static void wacom_intuos_pro2_bt_pen(str
 		/* Add back in missing bits of ID for non-USI pens */
 		wacom->id[0] |= (wacom->serial[0] >> 32) & 0xFFFFF;
 	}
-	wacom->tool[0]   = wacom_intuos_get_tool_type(wacom_intuos_id_mangle(wacom->id[0]));
 
 	for (i = 0; i < pen_frames; i++) {
 		unsigned char *frame = &data[i*pen_frame_len + 1];
 		bool valid = frame[0] & 0x80;
 		bool prox = frame[0] & 0x40;
 		bool range = frame[0] & 0x20;
+		bool invert = frame[0] & 0x10;
 
 		if (!valid)
 			continue;
@@ -1240,8 +1240,13 @@ static void wacom_intuos_pro2_bt_pen(str
 			wacom->shared->stylus_in_proximity = false;
 			wacom_exit_report(wacom);
 			input_sync(pen_input);
+
+			wacom->tool[0] = 0;
+			wacom->id[0] = 0;
+			wacom->serial[0] = 0;
 			return;
 		}
+
 		if (range) {
 			/* Fix rotation alignment: userspace expects zero at left */
 			int16_t rotation = (int16_t)get_unaligned_le16(&frame[9]);
@@ -1249,6 +1254,16 @@ static void wacom_intuos_pro2_bt_pen(str
 			if (rotation > 899)
 				rotation -= 1800;
 
+			if (!wacom->tool[0]) { /* first in range */
+				/* Going into range select tool */
+				if (invert)
+					wacom->tool[0] = BTN_TOOL_RUBBER;
+				else if (wacom->id[0])
+					wacom->tool[0] = wacom_intuos_get_tool_type(wacom->id[0]);
+				else
+					wacom->tool[0] = BTN_TOOL_PEN;
+			}
+
 			input_report_abs(pen_input, ABS_X, get_unaligned_le16(&frame[1]));
 			input_report_abs(pen_input, ABS_Y, get_unaligned_le16(&frame[3]));
 			input_report_abs(pen_input, ABS_TILT_X, (char)frame[7]);

[PATCH 4.14 41/45] HID: wacom: Dont report anything prior to the tool entering range

[Greg Kroah-Hartman]

From: Jason Gerecke <jason.gerecke@wacom.com>

commit e92a7be7fe5b2510fa60965eaf25f9e3dc08b8cc upstream.

If the tool spends some time in prox before entering range, a series of
events (e.g. ABS_DISTANCE, MSC_SERIAL) can be sent before we or userspace
have any clue about the pen whose data is being reported. We need to hold
off on reporting anything until the pen has entered range. Since we still
want to report events that occur "in prox" after the pen has *left* range
we use 'wacom-tool[0]' as the indicator that the pen did at one point
enter range and provide us/userspace with tool type and serial number
information.

Fixes: a48324de6d4d ("HID: wacom: Bluetooth IRQ for Intuos Pro should handle prox/range")
Cc: <stable@vger.kernel.org> # 4.11+
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Aaron Armstrong Skomra <aaron.skomra@wacom.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/hid/wacom_wac.c |   20 +++++++++++---------
 1 file changed, 11 insertions(+), 9 deletions(-)

--- a/drivers/hid/wacom_wac.c
+++ b/drivers/hid/wacom_wac.c
@@ -1271,17 +1271,19 @@ static void wacom_intuos_pro2_bt_pen(str
 			input_report_abs(pen_input, ABS_Z, rotation);
 			input_report_abs(pen_input, ABS_WHEEL, get_unaligned_le16(&frame[11]));
 		}
-		input_report_abs(pen_input, ABS_PRESSURE, get_unaligned_le16(&frame[5]));
-		input_report_abs(pen_input, ABS_DISTANCE, range ? frame[13] : wacom->features.distance_max);
+		if (wacom->tool[0]) {
+			input_report_abs(pen_input, ABS_PRESSURE, get_unaligned_le16(&frame[5]));
+			input_report_abs(pen_input, ABS_DISTANCE, range ? frame[13] : wacom->features.distance_max);
 
-		input_report_key(pen_input, BTN_TOUCH, frame[0] & 0x01);
-		input_report_key(pen_input, BTN_STYLUS, frame[0] & 0x02);
-		input_report_key(pen_input, BTN_STYLUS2, frame[0] & 0x04);
+			input_report_key(pen_input, BTN_TOUCH, frame[0] & 0x01);
+			input_report_key(pen_input, BTN_STYLUS, frame[0] & 0x02);
+			input_report_key(pen_input, BTN_STYLUS2, frame[0] & 0x04);
 
-		input_report_key(pen_input, wacom->tool[0], prox);
-		input_event(pen_input, EV_MSC, MSC_SERIAL, wacom->serial[0]);
-		input_report_abs(pen_input, ABS_MISC,
-				 wacom_intuos_id_mangle(wacom->id[0])); /* report tool id */
+			input_report_key(pen_input, wacom->tool[0], prox);
+			input_event(pen_input, EV_MSC, MSC_SERIAL, wacom->serial[0]);
+			input_report_abs(pen_input, ABS_MISC,
+					 wacom_intuos_id_mangle(wacom->id[0])); /* report tool id */
+		}
 
 		wacom->shared->stylus_in_proximity = prox;
 

[PATCH 4.14 42/45] HID: wacom: Send BTN_TOUCH in response to INTUOSP2_BT eraser contact

[Greg Kroah-Hartman]

From: Jason Gerecke <jason.gerecke@wacom.com>

commit fe7f8d73d1af19b678171170e4e5384deb57833d upstream.

The Bluetooth reports from the 2nd-gen Intuos Pro have separate bits for
indicating if the tip or eraser is in contact with the tablet. At the
moment, only the tip contact bit controls the state of the BTN_TOUCH
event. This prevents the eraser from working as expected. This commit
changes the driver to send BTN_TOUCH whenever either the tip or eraser
contact bit is set.

Fixes: 4922cd26f03c ("HID: wacom: Support 2nd-gen Intuos Pro's Bluetooth classic interface")
Cc: <stable@vger.kernel.org> # 4.11+
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Aaron Skomra <aaron.skomra@wacom.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/hid/wacom_wac.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/hid/wacom_wac.c
+++ b/drivers/hid/wacom_wac.c
@@ -1275,7 +1275,7 @@ static void wacom_intuos_pro2_bt_pen(str
 			input_report_abs(pen_input, ABS_PRESSURE, get_unaligned_le16(&frame[5]));
 			input_report_abs(pen_input, ABS_DISTANCE, range ? frame[13] : wacom->features.distance_max);
 
-			input_report_key(pen_input, BTN_TOUCH, frame[0] & 0x01);
+			input_report_key(pen_input, BTN_TOUCH, frame[0] & 0x09);
 			input_report_key(pen_input, BTN_STYLUS, frame[0] & 0x02);
 			input_report_key(pen_input, BTN_STYLUS2, frame[0] & 0x04);
 

[PATCH 4.14 43/45] coredump: fix race condition between collapse_huge_page() and core dumping

[Greg Kroah-Hartman]

From: Andrea Arcangeli <aarcange@redhat.com>

commit 59ea6d06cfa9247b586a695c21f94afa7183af74 upstream.

When fixing the race conditions between the coredump and the mmap_sem
holders outside the context of the process, we focused on
mmget_not_zero()/get_task_mm() callers in 04f5866e41fb70 ("coredump: fix
race condition between mmget_not_zero()/get_task_mm() and core
dumping"), but those aren't the only cases where the mmap_sem can be
taken outside of the context of the process as Michal Hocko noticed
while backporting that commit to older -stable kernels.

If mmgrab() is called in the context of the process, but then the
mm_count reference is transferred outside the context of the process,
that can also be a problem if the mmap_sem has to be taken for writing
through that mm_count reference.

khugepaged registration calls mmgrab() in the context of the process,
but the mmap_sem for writing is taken later in the context of the
khugepaged kernel thread.

collapse_huge_page() after taking the mmap_sem for writing doesn't
modify any vma, so it's not obvious that it could cause a problem to the
coredump, but it happens to modify the pmd in a way that breaks an
invariant that pmd_trans_huge_lock() relies upon.  collapse_huge_page()
needs the mmap_sem for writing just to block concurrent page faults that
call pmd_trans_huge_lock().

Specifically the invariant that "!pmd_trans_huge()" cannot become a
"pmd_trans_huge()" doesn't hold while collapse_huge_page() runs.

The coredump will call __get_user_pages() without mmap_sem for reading,
which eventually can invoke a lockless page fault which will need a
functional pmd_trans_huge_lock().

So collapse_huge_page() needs to use mmget_still_valid() to check it's
not running concurrently with the coredump...  as long as the coredump
can invoke page faults without holding the mmap_sem for reading.

This has "Fixes: khugepaged" to facilitate backporting, but in my view
it's more a bug in the coredump code that will eventually have to be
rewritten to stop invoking page faults without the mmap_sem for reading.
So the long term plan is still to drop all mmget_still_valid().

Link: http://lkml.kernel.org/r/20190607161558.32104-1-aarcange@redhat.com
Fixes: ba76149f47d8 ("thp: khugepaged")
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Reported-by: Michal Hocko <mhocko@suse.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 include/linux/sched/mm.h |    4 ++++
 mm/khugepaged.c          |    3 +++
 2 files changed, 7 insertions(+)

--- a/include/linux/sched/mm.h
+++ b/include/linux/sched/mm.h
@@ -62,6 +62,10 @@ static inline void mmdrop_async(struct m
  * followed by taking the mmap_sem for writing before modifying the
  * vmas or anything the coredump pretends not to change from under it.
  *
+ * It also has to be called when mmgrab() is used in the context of
+ * the process, but then the mm_count refcount is transferred outside
+ * the context of the process to run down_write() on that pinned mm.
+ *
  * NOTE: find_extend_vma() called from GUP context is the only place
  * that can modify the "mm" (notably the vm_start/end) under mmap_sem
  * for reading and outside the context of the process, so it is also
--- a/mm/khugepaged.c
+++ b/mm/khugepaged.c
@@ -1006,6 +1006,9 @@ static void collapse_huge_page(struct mm
 	 * handled by the anon_vma lock + PG_lock.
 	 */
 	down_write(&mm->mmap_sem);
+	result = SCAN_ANY_PROCESS;
+	if (!mmget_still_valid(mm))
+		goto out;
 	result = hugepage_vma_revalidate(mm, address, &vma);
 	if (result)
 		goto out;

[PATCH 4.14 44/45] infiniband: fix race condition between infiniband mlx4, mlx5 driver and core dumping

[Greg Kroah-Hartman]

From: Ajay Kaher <akaher@vmware.com>

This patch is the extension of following upstream commit to fix
the race condition between get_task_mm() and core dumping
for IB->mlx4 and IB->mlx5 drivers:

commit 04f5866e41fb ("coredump: fix race condition between
mmget_not_zero()/get_task_mm() and core dumping")'

Thanks to Jason for pointing this.

Signed-off-by: Ajay Kaher <akaher@vmware.com>
Acked-by: Jason Gunthorpe <jgg@mellanox.com>
---
 drivers/infiniband/hw/mlx4/main.c |    4 +++-
 drivers/infiniband/hw/mlx5/main.c |    3 +++
 2 files changed, 6 insertions(+), 1 deletion(-)

--- a/drivers/infiniband/hw/mlx4/main.c
+++ b/drivers/infiniband/hw/mlx4/main.c
@@ -1197,6 +1197,8 @@ static void mlx4_ib_disassociate_ucontex
 	 * mlx4_ib_vma_close().
 	 */
 	down_write(&owning_mm->mmap_sem);
+	if (!mmget_still_valid(owning_mm))
+		goto skip_mm;
 	for (i = 0; i < HW_BAR_COUNT; i++) {
 		vma = context->hw_bar_info[i].vma;
 		if (!vma)
@@ -1215,7 +1217,7 @@ static void mlx4_ib_disassociate_ucontex
 		/* context going to be destroyed, should not access ops any more */
 		context->hw_bar_info[i].vma->vm_ops = NULL;
 	}
-
+skip_mm:
 	up_write(&owning_mm->mmap_sem);
 	mmput(owning_mm);
 	put_task_struct(owning_process);
--- a/drivers/infiniband/hw/mlx5/main.c
+++ b/drivers/infiniband/hw/mlx5/main.c
@@ -1646,6 +1646,8 @@ static void mlx5_ib_disassociate_ucontex
 	 * mlx5_ib_vma_close.
 	 */
 	down_write(&owning_mm->mmap_sem);
+	if (!mmget_still_valid(owning_mm))
+		goto skip_mm;
 	mutex_lock(&context->vma_private_list_mutex);
 	list_for_each_entry_safe(vma_private, n, &context->vma_private_list,
 				 list) {
@@ -1662,6 +1664,7 @@ static void mlx5_ib_disassociate_ucontex
 		kfree(vma_private);
 	}
 	mutex_unlock(&context->vma_private_list_mutex);
+skip_mm:
 	up_write(&owning_mm->mmap_sem);
 	mmput(owning_mm);
 	put_task_struct(owning_process);

[PATCH 4.14 45/45] Abort file_remove_privs() for non-reg. files

[Greg Kroah-Hartman]

From: Alexander Lochmann <alexander.lochmann@tu-dortmund.de>

commit f69e749a49353d96af1a293f56b5b56de59c668a upstream.

file_remove_privs() might be called for non-regular files, e.g.
blkdev inode. There is no reason to do its job on things
like blkdev inodes, pipes, or cdevs. Hence, abort if
file does not refer to a regular inode.

AV: more to the point, for devices there might be any number of
inodes refering to given device.  Which one to strip the permissions
from, even if that made any sense in the first place?  All of them
will be observed with contents modified, after all.

Found by LockDoc (Alexander Lochmann, Horst Schirmeier and Olaf
Spinczyk)

Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Alexander Lochmann <alexander.lochmann@tu-dortmund.de>
Signed-off-by: Horst Schirmeier <horst.schirmeier@tu-dortmund.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Zubin Mithra <zsm@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/inode.c |    9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

--- a/fs/inode.c
+++ b/fs/inode.c
@@ -1817,8 +1817,13 @@ int file_remove_privs(struct file *file)
 	int kill;
 	int error = 0;
 
-	/* Fast path for nothing security related */
-	if (IS_NOSEC(inode))
+	/*
+	 * Fast path for nothing security related.
+	 * As well for non-regular files, e.g. blkdev inodes.
+	 * For example, blkdev_write_iter() might get here
+	 * trying to remove privs which it is not allowed to.
+	 */
+	if (IS_NOSEC(inode) || !S_ISREG(inode->i_mode))
 		return 0;
 
 	kill = dentry_needs_remove_privs(dentry);

Re: [PATCH 4.14 00/45] 4.14.129-stable review

[kernelci.org bot]

stable-rc/linux-4.14.y boot: 118 boots: 1 failed, 112 passed with 4 offline, 1 untried/unknown (v4.14.128-46-g593d1fadd024)

Full Boot Summary: https://kernelci.org/boot/all/job/stable-rc/branch/linux-4.14.y/kernel/v4.14.128-46-g593d1fadd024/
Full Build Summary: https://kernelci.org/build/stable-rc/branch/linux-4.14.y/kernel/v4.14.128-46-g593d1fadd024/

Tree: stable-rc
Branch: linux-4.14.y
Git Describe: v4.14.128-46-g593d1fadd024
Git Commit: 593d1fadd0247d5932dd5e626b90fe30984c2ae5
Git URL: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Tested: 65 unique boards, 23 SoC families, 14 builds out of 201

Boot Regressions Detected:

arm64:

    defconfig:
        gcc-8:
          meson-gxl-s905x-nexbox-a95x:
              lab-baylibre-seattle: new failure (last pass: v4.14.128)

Boot Failure Detected:

arm64:
    defconfig:
        gcc-8:
            meson-gxl-s905x-nexbox-a95x: 1 failed lab

Offline Platforms:

arm:

    exynos_defconfig:
        gcc-8
            exynos5800-peach-pi: 1 offline lab

    davinci_all_defconfig:
        gcc-8
            da850-evm: 1 offline lab
            dm365evm,legacy: 1 offline lab

arm64:

    defconfig:
        gcc-8
            apq8016-sbc: 1 offline lab

---
For more info write to <info@kernelci.org>

Re: [PATCH 4.14 00/45] 4.14.129-stable review

[Naresh Kamboju]

On Thu, 20 Jun 2019 at 23:39, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 4.14.129 release.
> There are 45 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sat 22 Jun 2019 05:42:15 PM UTC.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.129-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Summary
------------------------------------------------------------------------

kernel: 4.14.129-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.14.y
git commit: 7741fd984e5da7edc8b42719cac2db8d8f56b9a3
git describe: v4.14.128-46-g7741fd984e5d
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-4.14-oe/build/v4.14.128-46-g7741fd984e5d


No regressions (compared to build v4.14.128)

No fixes (compared to build v4.14.128)


Ran 23866 total tests in the following environments and test suites.

Environments
--------------
- dragonboard-410c - arm64
- hi6220-hikey - arm64
- i386
- juno-r2 - arm64
- qemu_arm
- qemu_arm64
- qemu_i386
- qemu_x86_64
- x15 - arm
- x86_64

Test Suites
-----------
* build
* install-android-platform-tools-r2600
* kselftest
* libhugetlbfs
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-cpuhotplug-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-timers-tests
* perf
* spectre-meltdown-checker-test
* v4l2-compliance
* network-basic-tests
* ltp-open-posix-tests
* kvm-unit-tests
* kselftest-vsyscall-mode-native
* kselftest-vsyscall-mode-none

-- 
Linaro LKFT
https://lkft.linaro.org

Re: [PATCH 4.14 00/45] 4.14.129-stable review

[Guenter Roeck]

On 6/20/19 10:57 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.14.129 release.
> There are 45 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sat 22 Jun 2019 05:42:15 PM UTC.
> Anything received after that time might be too late.
> 

Build results:
	total: 172 pass: 172 fail: 0
Qemu test results:
	total: 346 pass: 346 fail: 0

Guenter