[PATCH 4.9 000/117] 4.9.183-stable review

[PATCH 4.9 000/117] 4.9.183-stable review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 4.9.183 release.
There are 117 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Sat 22 Jun 2019 05:42:15 PM UTC.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.183-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 4.9.183-rc1

Alexander Lochmann <alexander.lochmann@tu-dortmund.de>
    Abort file_remove_privs() for non-reg. files

Amit Cohen <amitc@mellanox.com>
    mlxsw: spectrum: Prevent force of 56G

Jason Yan <yanaijie@huawei.com>
    scsi: libsas: delete sas port if expander discover failed

Lianbo Jiang <lijiang@redhat.com>
    scsi: smartpqi: properly set both the DMA mask and the coherent DMA mask

Varun Prakash <varun@chelsio.com>
    scsi: libcxgbi: add a check for NULL pointer in cxgbi_check_route()

Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
    net: sh_eth: fix mdio access in sh_eth_close() for R-Car Gen2 and RZ/A1 SoCs

Paul Mackerras <paulus@ozlabs.org>
    KVM: PPC: Book3S HV: Don't take kvm->lock around kvm_for_each_vcpu

Paul Mackerras <paulus@ozlabs.org>
    KVM: PPC: Book3S: Use new mutex to synchronize access to rtas token list

Randy Dunlap <rdunlap@infradead.org>
    ia64: fix build errors by exporting paddr_to_nid()

Thomas Richter <tmricht@linux.ibm.com>
    perf record: Fix s390 missing module symbol and warning for non-root users

Shawn Landden <shawn@git.icu>
    perf data: Fix 'strncat may truncate' build failure with recent gcc

Sahitya Tummala <stummala@codeaurora.org>
    configfs: Fix use-after-free when accessing sd->s_dentry

Yingjoe Chen <yingjoe.chen@mediatek.com>
    i2c: dev: fix potential memory leak in i2cdev_ioctl_rdwr

Kees Cook <keescook@chromium.org>
    net: tulip: de4x5: Drop redundant MODULE_DEVICE_TABLE()

Randy Dunlap <rdunlap@infradead.org>
    gpio: fix gpio-adp5588 build errors

Peter Zijlstra <peterz@infradead.org>
    perf/ring_buffer: Add ordering to rb->nest increment

Yabin Cui <yabinc@google.com>
    perf/ring_buffer: Fix exposing a temporarily decreased data_head

Frank van der Linden <fllinden@amazon.com>
    x86/CPU/AMD: Don't force the CPB cap when running under a hypervisor

Dan Carpenter <dan.carpenter@oracle.com>
    mISDN: make sure device name is NUL terminated

Jeffrin Jose T <jeffrin@rajagiritech.edu.in>
    selftests: netfilter: missing error check when setting up veth interface

Stephane Eranian <eranian@google.com>
    perf/x86/intel/ds: Fix EVENT vs. UEVENT PEBS constraints

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Revert "staging: vc04_services: prevent integer overflow in create_pagelist()"

John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
    sunhv: Fix device naming inconsistency between sunhv_console and sunhv_reg

Eric Dumazet <edumazet@google.com>
    neigh: fix use-after-free read in pneigh_get_next

Jeremy Sowden <jeremy@azazel.net>
    lapb: fixed leak of control-blocks.

Eric Dumazet <edumazet@google.com>
    ipv6: flowlabel: fl6_sock_lookup() must use atomic_inc_not_zero

Ivan Vecera <ivecera@redhat.com>
    be2net: Fix number of Rx queues used for flow hashing

Eric Dumazet <edumazet@google.com>
    ax25: fix inconsistent lock state in ax25_destroy_timer

Baruch Siach <baruch@tkos.co.il>
    rtc: pcf8523: don't return invalid date when battery is low

Daniele Palmas <dnlplm@gmail.com>
    USB: serial: option: add Telit 0x1260 and 0x1261 compositions

Jörgen Storvist <jorgen.storvist@gmail.com>
    USB: serial: option: add support for Simcom SIM7500/SIM7600 RNDIS mode

Chris Packham <chris.packham@alliedtelesis.co.nz>
    USB: serial: pl2303: add Allied Telesis VT-Kit3

Kai-Heng Feng <kai.heng.feng@canonical.com>
    USB: usb-storage: Add new ID to ums-realtek

Marco Zatta <marco@zatta.me>
    USB: Fix chipmunk-like voice when using Logitech C270 for recording audio.

Martin Schiller <ms@dev.tdt.de>
    usb: dwc2: Fix DMA cache alignment issues

Murray McAllister <murray.mcallister@gmail.com>
    drm/vmwgfx: NULL pointer dereference from vmw_cmd_dx_view_define()

Murray McAllister <murray.mcallister@gmail.com>
    drm/vmwgfx: integer underflow in vmw_cmd_dx_set_shader() leading to an invalid read

Christian Borntraeger <borntraeger@de.ibm.com>
    KVM: s390: fix memory slot handling for KVM_SET_USER_MEMORY_REGION

Paolo Bonzini <pbonzini@redhat.com>
    KVM: x86/pmu: do not mask the value that is written to fixed PMUs

Bernd Eckstein <3erndeckstein@gmail.com>
    usbnet: ipheth: fix racing condition

Kees Cook <keescook@chromium.org>
    selftests/timers: Add missing fflush(stdout) calls

Colin Ian King <colin.king@canonical.com>
    scsi: bnx2fc: fix incorrect cast to u64 on shift operation

Mark Rutland <mark.rutland@arm.com>
    arm64/mm: Inhibit huge-vmap with ptdump

James Smart <jsmart2021@gmail.com>
    scsi: lpfc: add check for loss of ndlp when sending RRQ

Young Xiao <YangX92@hotmail.com>
    Drivers: misc: fix out-of-bounds access in function param_set_kgdbts_var

Takashi Iwai <tiwai@suse.de>
    Revert "ALSA: seq: Protect in-kernel ioctl calls with mutex"

Takashi Iwai <tiwai@suse.de>
    ALSA: seq: Fix race of get-subscription call vs port-delete ioctls

Takashi Iwai <tiwai@suse.de>
    ALSA: seq: Protect in-kernel ioctl calls with mutex

Peter Zijlstra <peterz@infradead.org>
    x86/uaccess, kcov: Disable stack protector

S.j. Wang <shengjiu.wang@nxp.com>
    ASoC: fsl_asrc: Fix the issue about unsupported rate

S.j. Wang <shengjiu.wang@nxp.com>
    ASoC: cs42xx8: Add regcache mask dirty

Tejun Heo <tj@kernel.org>
    cgroup: Use css_tryget() instead of css_tryget_online() in task_get_css()

Coly Li <colyli@suse.de>
    bcache: fix stack corruption by PRECEDING_KEY()

Russell King <rmk+kernel@armlinux.org.uk>
    i2c: acorn: fix i2c warning

Hans Verkuil <hans.verkuil@cisco.com>
    media: v4l2-ioctl: clear fields in s_parm

Jann Horn <jannh@google.com>
    ptrace: restore smp_rmb() in __ptrace_may_access()

Eric W. Biederman <ebiederm@xmission.com>
    signal/ptrace: Don't leak unitialized kernel memory with PTRACE_PEEK_SIGINFO

Wengang Wang <wen.gang.wang@oracle.com>
    fs/ocfs2: fix race in ocfs2_dentry_attach_lock()

Shakeel Butt <shakeelb@google.com>
    mm/list_lru.c: fix memory leak in __memcg_init_list_lru_node

Hans de Goede <hdegoede@redhat.com>
    libata: Extend quirks for the ST1000LM024 drives with NOLPM quirk

Takashi Sakamoto <o-takashi@sakamocchi.jp>
    ALSA: oxfw: allow PCM capture for Stanton SCS.1m

Takashi Iwai <tiwai@suse.de>
    ALSA: seq: Cover unsubscribe_port() in list_mutex

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Revert "Bluetooth: Align minimum encryption key size for LE and BR/EDR connections"

Marek Szyprowski <m.szyprowski@samsung.com>
    ARM: exynos: Fix undefined instruction during Exynos5422 resume

Phong Hoang <phong.hoang.wz@renesas.com>
    pwm: Fix deadlock warning when removing PWM device

Krzysztof Kozlowski <krzk@kernel.org>
    ARM: dts: exynos: Always enable necessary APIO_1V8 and ABB_1V8 regulators on Arndale Octa

Christoph Vogtländer <c.vogtlaender@sigma-surface-science.com>
    pwm: tiehrpwm: Update shadow register for disabling PWMs

Andy Shevchenko <andriy.shevchenko@linux.intel.com>
    dmaengine: idma64: Use actual device for DMA transfers

Tony Lindgren <tony@atomide.com>
    gpio: gpio-omap: add check for off wake capable gpios

Kangjie Lu <kjlu@umn.edu>
    PCI: xilinx: Check for __get_free_pages() failure

Kangjie Lu <kjlu@umn.edu>
    video: imsttfb: fix potential NULL pointer dereferences

Kangjie Lu <kjlu@umn.edu>
    video: hgafb: fix potential NULL pointer dereference

Marek Vasut <marek.vasut+renesas@gmail.com>
    PCI: rcar: Fix 64bit MSI message address handling

Kangjie Lu <kjlu@umn.edu>
    PCI: rcar: Fix a potential NULL pointer dereference

Junxiao Chang <junxiao.chang@intel.com>
    platform/x86: intel_pmc_ipc: adding error handling

Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
    PCI: rpadlpar: Fix leaked device_node references in add/remove paths

Andrey Smirnov <andrew.smirnov@gmail.com>
    ARM: dts: imx6qdl: Specify IMX6QDL_CLK_IPG as "ipg" clock to SDMA

Andrey Smirnov <andrew.smirnov@gmail.com>
    ARM: dts: imx6sx: Specify IMX6SX_CLK_IPG as "ipg" clock to SDMA

Andrey Smirnov <andrew.smirnov@gmail.com>
    ARM: dts: imx6ul: Specify IMX6UL_CLK_IPG as "ipg" clock to SDMA

Andrey Smirnov <andrew.smirnov@gmail.com>
    ARM: dts: imx7d: Specify IMX7D_CLK_IPG as "ipg" clock to SDMA

Andrey Smirnov <andrew.smirnov@gmail.com>
    ARM: dts: imx6sx: Specify IMX6SX_CLK_IPG as "ahb" clock to SDMA

Douglas Anderson <dianders@chromium.org>
    clk: rockchip: Turn on "aclk_dmac1" for suspend on rk3288

Nathan Chancellor <natechancellor@gmail.com>
    soc: mediatek: pwrap: Zero initialize rdata in pwrap_init_cipher

Enrico Granata <egranata@chromium.org>
    platform/chrome: cros_ec_proto: check for NULL transfer function

Wenwen Wang <wang6495@umn.edu>
    x86/PCI: Fix PCI IRQ routing table memory leak

J. Bruce Fields <bfields@redhat.com>
    nfsd: allow fh_want_write to be called twice

Kirill Smelkov <kirr@nexedi.com>
    fuse: retrieve: cap requested size to negotiated max_write

Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
    nvmem: core: fix read buffer in place

Takashi Iwai <tiwai@suse.de>
    ALSA: hda - Register irq handler after the chip initialization

Lu Baolu <baolu.lu@linux.intel.com>
    iommu/vt-d: Set intel_iommu_gfx_mapped correctly

Vladimir Zapolskiy <vz@mleia.com>
    watchdog: fix compile time error of pretimeout governors

Georg Hofmann <georg@hofmannsweb.com>
    watchdog: imx2_wdt: Fix set_timeout for big timeout values

Maciej Żenczykowski <maze@google.com>
    uml: fix a boot splat wrt use of cpu_all_mask

YueHaibing <yuehaibing@huawei.com>
    configfs: fix possible use-after-free in configfs_register_group

Chao Yu <yuchao0@huawei.com>
    f2fs: fix to do sanity check on valid block count of segment

Chao Yu <yuchao0@huawei.com>
    f2fs: fix to clear dirty inode in error path of f2fs_iget()

Chao Yu <yuchao0@huawei.com>
    f2fs: fix to avoid panic in do_recover_data()

Miroslav Lichvar <mlichvar@redhat.com>
    ntp: Allow TAI-UTC offset to be set to zero

Martin Blumenstingl <martin.blumenstingl@googlemail.com>
    pwm: meson: Use the spin-lock only to protect register modifications

Josh Poimboeuf <jpoimboe@redhat.com>
    objtool: Don't use ignore flag for fake jumps

Matt Redfearn <matt.redfearn@thinci.com>
    drm/bridge: adv7511: Fix low refresh rate selection

Stephane Eranian <eranian@google.com>
    perf/x86/intel: Allow PEBS multi-entry in watermark mode

Tony Lindgren <tony@atomide.com>
    mfd: twl6040: Fix device init errors for ACCCTL register

Binbin Wu <binbin.wu@intel.com>
    mfd: intel-lpss: Set the device in reset state when init

Daniel Gomez <dagmcr@gmail.com>
    mfd: tps65912-spi: Add missing of table registration

Amit Kucheria <amit.kucheria@linaro.org>
    drivers: thermal: tsens: Don't print error message on -EPROBE_DEFER

Cyrill Gorcunov <gorcunov@gmail.com>
    kernel/sys.c: prctl: fix false positive in validate_prctl_map()

Qian Cai <cai@lca.pw>
    mm/slab.c: fix an infinite loop in leaks_show()

Yue Hu <huyue2@yulong.com>
    mm/cma_debug.c: fix the break condition in cma_maxchunk_get()

Yue Hu <huyue2@yulong.com>
    mm/cma.c: fix crash on CMA allocation if bitmap allocation fails

Linxu Fang <fanglinxu@huawei.com>
    mem-hotplug: fix node spanned pages when we have a node with only ZONE_MOVABLE

Mike Kravetz <mike.kravetz@oracle.com>
    hugetlbfs: on restore reserve error path retain subpool reservation

Arnd Bergmann <arnd@arndb.de>
    ARM: prevent tracing IPI_CPU_BACKTRACE

Li Rongqing <lirongqing@baidu.com>
    ipc: prevent lockup on alloc_msg and free_msg

Christian Brauner <christian@brauner.io>
    sysctl: return -EINVAL if val violates minmax

Hou Tao <houtao1@huawei.com>
    fs/fat/file.c: issue flush after the writeback of FAT

Kangjie Lu <kjlu@umn.edu>
    rapidio: fix a NULL pointer dereference when create_workqueue() fails


-------------

Diffstat:

 Makefile                                           |  4 +--
 arch/arm/boot/dts/exynos5420-arndale-octa.dts      |  2 ++
 arch/arm/boot/dts/imx6qdl.dtsi                     |  2 +-
 arch/arm/boot/dts/imx6sl.dtsi                      |  2 +-
 arch/arm/boot/dts/imx6sx.dtsi                      |  2 +-
 arch/arm/boot/dts/imx6ul.dtsi                      |  2 +-
 arch/arm/boot/dts/imx7s.dtsi                       |  4 +--
 arch/arm/include/asm/hardirq.h                     |  1 +
 arch/arm/kernel/smp.c                              |  6 +++-
 arch/arm/mach-exynos/suspend.c                     | 19 ++++++++++++
 arch/arm64/mm/mmu.c                                | 11 +++++--
 arch/ia64/mm/numa.c                                |  1 +
 arch/powerpc/include/asm/kvm_host.h                |  1 +
 arch/powerpc/kvm/book3s.c                          |  1 +
 arch/powerpc/kvm/book3s_hv.c                       |  9 +-----
 arch/powerpc/kvm/book3s_rtas.c                     | 14 ++++-----
 arch/s390/kvm/kvm-s390.c                           | 35 +++++++++++++---------
 arch/um/kernel/time.c                              |  2 +-
 arch/x86/events/intel/core.c                       |  2 +-
 arch/x86/events/intel/ds.c                         | 28 ++++++++---------
 arch/x86/kernel/cpu/amd.c                          |  7 +++--
 arch/x86/kvm/pmu_intel.c                           | 13 ++++----
 arch/x86/pci/irq.c                                 | 10 +++++--
 drivers/ata/libata-core.c                          |  9 ++++--
 drivers/clk/rockchip/clk-rk3288.c                  | 11 +++++++
 drivers/dma/idma64.c                               |  6 ++--
 drivers/dma/idma64.h                               |  2 ++
 drivers/gpio/Kconfig                               |  1 +
 drivers/gpio/gpio-omap.c                           | 25 +++++++++++-----
 drivers/gpu/drm/bridge/adv7511/adv7511_drv.c       |  6 ++--
 drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c            |  7 ++++-
 drivers/i2c/busses/i2c-acorn.c                     |  1 +
 drivers/i2c/i2c-dev.c                              |  1 +
 drivers/iommu/intel-iommu.c                        |  7 +++--
 drivers/isdn/mISDN/socket.c                        |  5 ++--
 drivers/md/bcache/bset.c                           | 16 ++++++++--
 drivers/md/bcache/bset.h                           | 34 ++++++++++++---------
 drivers/media/v4l2-core/v4l2-ioctl.c               | 17 ++++++++++-
 drivers/mfd/intel-lpss.c                           |  3 ++
 drivers/mfd/tps65912-spi.c                         |  1 +
 drivers/mfd/twl6040.c                              | 13 +++++++-
 drivers/misc/kgdbts.c                              |  4 +--
 drivers/net/ethernet/dec/tulip/de4x5.c             |  1 -
 drivers/net/ethernet/emulex/benet/be_ethtool.c     |  2 +-
 drivers/net/ethernet/mellanox/mlxsw/spectrum.c     |  4 +++
 drivers/net/ethernet/renesas/sh_eth.c              |  4 +++
 drivers/net/usb/ipheth.c                           |  3 +-
 drivers/nvmem/core.c                               | 15 ++++++----
 drivers/pci/host/pcie-rcar.c                       | 10 +++++--
 drivers/pci/host/pcie-xilinx.c                     | 12 ++++++--
 drivers/pci/hotplug/rpadlpar_core.c                |  4 +++
 drivers/platform/chrome/cros_ec_proto.c            | 11 +++++++
 drivers/platform/x86/intel_pmc_ipc.c               |  6 +++-
 drivers/pwm/core.c                                 | 10 +++----
 drivers/pwm/pwm-meson.c                            | 25 +++++++++++-----
 drivers/pwm/pwm-tiehrpwm.c                         |  2 ++
 drivers/pwm/sysfs.c                                | 14 +--------
 drivers/rapidio/rio_cm.c                           |  8 +++++
 drivers/rtc/rtc-pcf8523.c                          | 32 +++++++++++++++-----
 drivers/scsi/bnx2fc/bnx2fc_hwi.c                   |  2 +-
 drivers/scsi/cxgbi/libcxgbi.c                      |  4 +++
 drivers/scsi/libsas/sas_expander.c                 |  2 ++
 drivers/scsi/lpfc/lpfc_els.c                       |  5 +++-
 drivers/scsi/smartpqi/smartpqi_init.c              |  2 +-
 drivers/soc/mediatek/mtk-pmic-wrap.c               |  2 +-
 drivers/spi/spi-pxa2xx.c                           |  7 +----
 .../interface/vchiq_arm/vchiq_2835_arm.c           |  9 ------
 drivers/thermal/qcom/tsens.c                       |  3 +-
 drivers/tty/serial/8250/8250_dw.c                  |  4 +--
 drivers/tty/serial/sunhv.c                         |  2 +-
 drivers/usb/core/quirks.c                          |  3 ++
 drivers/usb/dwc2/hcd.c                             | 10 +++++--
 drivers/usb/serial/option.c                        |  6 ++++
 drivers/usb/serial/pl2303.c                        |  1 +
 drivers/usb/serial/pl2303.h                        |  3 ++
 drivers/usb/storage/unusual_realtek.h              |  5 ++++
 drivers/video/fbdev/hgafb.c                        |  2 ++
 drivers/video/fbdev/imsttfb.c                      |  5 ++++
 drivers/watchdog/Kconfig                           |  1 +
 drivers/watchdog/imx2_wdt.c                        |  4 ++-
 fs/configfs/dir.c                                  | 31 +++++++++++--------
 fs/f2fs/inode.c                                    |  1 +
 fs/f2fs/recovery.c                                 | 10 ++++++-
 fs/f2fs/segment.h                                  |  3 +-
 fs/fat/file.c                                      | 11 +++++--
 fs/fuse/dev.c                                      |  2 +-
 fs/inode.c                                         |  9 ++++--
 fs/nfsd/vfs.h                                      |  5 +++-
 fs/ocfs2/dcache.c                                  | 12 ++++++++
 include/linux/cgroup.h                             | 10 +++++--
 include/linux/pwm.h                                |  5 ----
 include/net/bluetooth/hci_core.h                   |  3 --
 ipc/mqueue.c                                       | 10 +++++--
 ipc/msgutil.c                                      |  6 ++++
 kernel/Makefile                                    |  1 +
 kernel/cred.c                                      |  9 ++++++
 kernel/events/ring_buffer.c                        | 33 +++++++++++++++++---
 kernel/ptrace.c                                    | 20 +++++++++++--
 kernel/sys.c                                       |  2 +-
 kernel/sysctl.c                                    |  6 ++--
 kernel/time/ntp.c                                  |  2 +-
 mm/cma.c                                           |  4 ++-
 mm/cma_debug.c                                     |  2 +-
 mm/hugetlb.c                                       | 21 +++++++++----
 mm/list_lru.c                                      |  2 +-
 mm/page_alloc.c                                    |  6 ++--
 mm/slab.c                                          |  6 +++-
 net/ax25/ax25_route.c                              |  2 ++
 net/bluetooth/hci_conn.c                           |  8 -----
 net/core/neighbour.c                               |  7 +++++
 net/ipv6/ip6_flowlabel.c                           |  7 +++--
 net/lapb/lapb_iface.c                              |  1 +
 sound/core/seq/seq_clientmgr.c                     | 10 ++-----
 sound/core/seq/seq_ports.c                         | 15 ++++++----
 sound/core/seq/seq_ports.h                         |  5 ++--
 sound/firewire/oxfw/oxfw.c                         |  3 --
 sound/pci/hda/hda_intel.c                          |  6 ++--
 sound/soc/codecs/cs42xx8.c                         |  1 +
 sound/soc/fsl/fsl_asrc.c                           |  4 +--
 tools/objtool/check.c                              |  8 +++--
 tools/perf/arch/s390/util/machine.c                |  9 ++++--
 tools/perf/util/data-convert-bt.c                  |  2 +-
 tools/testing/selftests/netfilter/nft_nat.sh       |  6 +++-
 tools/testing/selftests/timers/adjtick.c           |  1 +
 tools/testing/selftests/timers/leapcrash.c         |  1 +
 tools/testing/selftests/timers/mqueue-lat.c        |  1 +
 tools/testing/selftests/timers/nanosleep.c         |  1 +
 tools/testing/selftests/timers/nsleep-lat.c        |  1 +
 tools/testing/selftests/timers/raw_skew.c          |  1 +
 tools/testing/selftests/timers/set-tai.c           |  1 +
 tools/testing/selftests/timers/set-tz.c            |  2 ++
 tools/testing/selftests/timers/threadtest.c        |  1 +
 tools/testing/selftests/timers/valid-adjtimex.c    |  2 ++
 133 files changed, 646 insertions(+), 284 deletions(-)

[PATCH 4.9 001/117] rapidio: fix a NULL pointer dereference when create_workqueue() fails

[Greg Kroah-Hartman]

[ Upstream commit 23015b22e47c5409620b1726a677d69e5cd032ba ]

In case create_workqueue fails, the fix releases resources and returns
-ENOMEM to avoid NULL pointer dereference.

Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Acked-by: Alexandre Bounine <alex.bou9@gmail.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/rapidio/rio_cm.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/rapidio/rio_cm.c b/drivers/rapidio/rio_cm.c
index bad0e0ea4f30..ef989a15aefc 100644
--- a/drivers/rapidio/rio_cm.c
+++ b/drivers/rapidio/rio_cm.c
@@ -2145,6 +2145,14 @@ static int riocm_add_mport(struct device *dev,
 	mutex_init(&cm->rx_lock);
 	riocm_rx_fill(cm, RIOCM_RX_RING_SIZE);
 	cm->rx_wq = create_workqueue(DRV_NAME "/rxq");
+	if (!cm->rx_wq) {
+		riocm_error("failed to allocate IBMBOX_%d on %s",
+			    cmbox, mport->name);
+		rio_release_outb_mbox(mport, cmbox);
+		kfree(cm);
+		return -ENOMEM;
+	}
+
 	INIT_WORK(&cm->rx_work, rio_ibmsg_handler);
 
 	cm->tx_slot = 0;
-- 
2.20.1

[PATCH 4.9 002/117] fs/fat/file.c: issue flush after the writeback of FAT

[Greg Kroah-Hartman]

[ Upstream commit bd8309de0d60838eef6fb575b0c4c7e95841cf73 ]

fsync() needs to make sure the data & meta-data of file are persistent
after the return of fsync(), even when a power-failure occurs later.  In
the case of fat-fs, the FAT belongs to the meta-data of file, so we need
to issue a flush after the writeback of FAT instead before.

Also bail out early when any stage of fsync fails.

Link: http://lkml.kernel.org/r/20190409030158.136316-1-houtao1@huawei.com
Signed-off-by: Hou Tao <houtao1@huawei.com>
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/fat/file.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/fs/fat/file.c b/fs/fat/file.c
index 3d04b124bce0..392ec5641f38 100644
--- a/fs/fat/file.c
+++ b/fs/fat/file.c
@@ -160,12 +160,17 @@ static int fat_file_release(struct inode *inode, struct file *filp)
 int fat_file_fsync(struct file *filp, loff_t start, loff_t end, int datasync)
 {
 	struct inode *inode = filp->f_mapping->host;
-	int res, err;
+	int err;
+
+	err = __generic_file_fsync(filp, start, end, datasync);
+	if (err)
+		return err;
 
-	res = generic_file_fsync(filp, start, end, datasync);
 	err = sync_mapping_buffers(MSDOS_SB(inode->i_sb)->fat_inode->i_mapping);
+	if (err)
+		return err;
 
-	return res ? res : err;
+	return blkdev_issue_flush(inode->i_sb->s_bdev, GFP_KERNEL, NULL);
 }
 
 
-- 
2.20.1

[PATCH 4.9 003/117] sysctl: return -EINVAL if val violates minmax

[Greg Kroah-Hartman]

[ Upstream commit e260ad01f0aa9e96b5386d5cd7184afd949dc457 ]

Currently when userspace gives us a values that overflow e.g.  file-max
and other callers of __do_proc_doulongvec_minmax() we simply ignore the
new value and leave the current value untouched.

This can be problematic as it gives the illusion that the limit has
indeed be bumped when in fact it failed.  This commit makes sure to
return EINVAL when an overflow is detected.  Please note that this is a
userspace facing change.

Link: http://lkml.kernel.org/r/20190210203943.8227-4-christian@brauner.io
Signed-off-by: Christian Brauner <christian@brauner.io>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Joe Lawrence <joe.lawrence@redhat.com>
Cc: Waiman Long <longman@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/sysctl.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index cf0aeaae567e..6af1ac551ea3 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -2527,8 +2527,10 @@ static int __do_proc_doulongvec_minmax(void *data, struct ctl_table *table, int
 			if (neg)
 				continue;
 			val = convmul * val / convdiv;
-			if ((min && val < *min) || (max && val > *max))
-				continue;
+			if ((min && val < *min) || (max && val > *max)) {
+				err = -EINVAL;
+				break;
+			}
 			*i = val;
 		} else {
 			val = convdiv * (*i) / convmul;
-- 
2.20.1

[PATCH 4.9 004/117] ipc: prevent lockup on alloc_msg and free_msg

[Greg Kroah-Hartman]

[ Upstream commit d6a2946a88f524a47cc9b79279667137899db807 ]

msgctl10 of ltp triggers the following lockup When CONFIG_KASAN is
enabled on large memory SMP systems, the pages initialization can take a
long time, if msgctl10 requests a huge block memory, and it will block
rcu scheduler, so release cpu actively.

After adding schedule() in free_msg, free_msg can not be called when
holding spinlock, so adding msg to a tmp list, and free it out of
spinlock

  rcu: INFO: rcu_preempt detected stalls on CPUs/tasks:
  rcu:     Tasks blocked on level-1 rcu_node (CPUs 16-31): P32505
  rcu:     Tasks blocked on level-1 rcu_node (CPUs 48-63): P34978
  rcu:     (detected by 11, t=35024 jiffies, g=44237529, q=16542267)
  msgctl10        R  running task    21608 32505   2794 0x00000082
  Call Trace:
   preempt_schedule_irq+0x4c/0xb0
   retint_kernel+0x1b/0x2d
  RIP: 0010:__is_insn_slot_addr+0xfb/0x250
  Code: 82 1d 00 48 8b 9b 90 00 00 00 4c 89 f7 49 c1 ee 03 e8 59 83 1d 00 48 b8 00 00 00 00 00 fc ff df 4c 39 eb 48 89 9d 58 ff ff ff <41> c6 04 06 f8 74 66 4c 8d 75 98 4c 89 f1 48 c1 e9 03 48 01 c8 48
  RSP: 0018:ffff88bce041f758 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13
  RAX: dffffc0000000000 RBX: ffffffff8471bc50 RCX: ffffffff828a2a57
  RDX: dffffc0000000000 RSI: dffffc0000000000 RDI: ffff88bce041f780
  RBP: ffff88bce041f828 R08: ffffed15f3f4c5b3 R09: ffffed15f3f4c5b3
  R10: 0000000000000001 R11: ffffed15f3f4c5b2 R12: 000000318aee9b73
  R13: ffffffff8471bc50 R14: 1ffff1179c083ef0 R15: 1ffff1179c083eec
   kernel_text_address+0xc1/0x100
   __kernel_text_address+0xe/0x30
   unwind_get_return_address+0x2f/0x50
   __save_stack_trace+0x92/0x100
   create_object+0x380/0x650
   __kmalloc+0x14c/0x2b0
   load_msg+0x38/0x1a0
   do_msgsnd+0x19e/0xcf0
   do_syscall_64+0x117/0x400
   entry_SYSCALL_64_after_hwframe+0x49/0xbe

  rcu: INFO: rcu_preempt detected stalls on CPUs/tasks:
  rcu:     Tasks blocked on level-1 rcu_node (CPUs 0-15): P32170
  rcu:     (detected by 14, t=35016 jiffies, g=44237525, q=12423063)
  msgctl10        R  running task    21608 32170  32155 0x00000082
  Call Trace:
   preempt_schedule_irq+0x4c/0xb0
   retint_kernel+0x1b/0x2d
  RIP: 0010:lock_acquire+0x4d/0x340
  Code: 48 81 ec c0 00 00 00 45 89 c6 4d 89 cf 48 8d 6c 24 20 48 89 3c 24 48 8d bb e4 0c 00 00 89 74 24 0c 48 c7 44 24 20 b3 8a b5 41 <48> c1 ed 03 48 c7 44 24 28 b4 25 18 84 48 c7 44 24 30 d0 54 7a 82
  RSP: 0018:ffff88af83417738 EFLAGS: 00000282 ORIG_RAX: ffffffffffffff13
  RAX: dffffc0000000000 RBX: ffff88bd335f3080 RCX: 0000000000000002
  RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88bd335f3d64
  RBP: ffff88af83417758 R08: 0000000000000000 R09: 0000000000000000
  R10: 0000000000000001 R11: ffffed13f3f745b2 R12: 0000000000000000
  R13: 0000000000000002 R14: 0000000000000000 R15: 0000000000000000
   is_bpf_text_address+0x32/0xe0
   kernel_text_address+0xec/0x100
   __kernel_text_address+0xe/0x30
   unwind_get_return_address+0x2f/0x50
   __save_stack_trace+0x92/0x100
   save_stack+0x32/0xb0
   __kasan_slab_free+0x130/0x180
   kfree+0xfa/0x2d0
   free_msg+0x24/0x50
   do_msgrcv+0x508/0xe60
   do_syscall_64+0x117/0x400
   entry_SYSCALL_64_after_hwframe+0x49/0xbe

Davidlohr said:
 "So after releasing the lock, the msg rbtree/list is empty and new
  calls will not see those in the newly populated tmp_msg list, and
  therefore they cannot access the delayed msg freeing pointers, which
  is good. Also the fact that the node_cache is now freed before the
  actual messages seems to be harmless as this is wanted for
  msg_insert() avoiding GFP_ATOMIC allocations, and after releasing the
  info->lock the thing is freed anyway so it should not change things"

Link: http://lkml.kernel.org/r/1552029161-4957-1-git-send-email-lirongqing@baidu.com
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: Zhang Yu <zhangyu31@baidu.com>
Reviewed-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 ipc/mqueue.c  | 10 ++++++++--
 ipc/msgutil.c |  6 ++++++
 2 files changed, 14 insertions(+), 2 deletions(-)

diff --git a/ipc/mqueue.c b/ipc/mqueue.c
index 28a142f1be36..d5491a880751 100644
--- a/ipc/mqueue.c
+++ b/ipc/mqueue.c
@@ -371,7 +371,8 @@ static void mqueue_evict_inode(struct inode *inode)
 	struct user_struct *user;
 	unsigned long mq_bytes, mq_treesize;
 	struct ipc_namespace *ipc_ns;
-	struct msg_msg *msg;
+	struct msg_msg *msg, *nmsg;
+	LIST_HEAD(tmp_msg);
 
 	clear_inode(inode);
 
@@ -382,10 +383,15 @@ static void mqueue_evict_inode(struct inode *inode)
 	info = MQUEUE_I(inode);
 	spin_lock(&info->lock);
 	while ((msg = msg_get(info)) != NULL)
-		free_msg(msg);
+		list_add_tail(&msg->m_list, &tmp_msg);
 	kfree(info->node_cache);
 	spin_unlock(&info->lock);
 
+	list_for_each_entry_safe(msg, nmsg, &tmp_msg, m_list) {
+		list_del(&msg->m_list);
+		free_msg(msg);
+	}
+
 	/* Total amount of bytes accounted for the mqueue */
 	mq_treesize = info->attr.mq_maxmsg * sizeof(struct msg_msg) +
 		min_t(unsigned int, info->attr.mq_maxmsg, MQ_PRIO_MAX) *
diff --git a/ipc/msgutil.c b/ipc/msgutil.c
index bf74eaa5c39f..6d90b191c638 100644
--- a/ipc/msgutil.c
+++ b/ipc/msgutil.c
@@ -18,6 +18,7 @@
 #include <linux/utsname.h>
 #include <linux/proc_ns.h>
 #include <linux/uaccess.h>
+#include <linux/sched.h>
 
 #include "util.h"
 
@@ -64,6 +65,9 @@ static struct msg_msg *alloc_msg(size_t len)
 	pseg = &msg->next;
 	while (len > 0) {
 		struct msg_msgseg *seg;
+
+		cond_resched();
+
 		alen = min(len, DATALEN_SEG);
 		seg = kmalloc(sizeof(*seg) + alen, GFP_KERNEL_ACCOUNT);
 		if (seg == NULL)
@@ -176,6 +180,8 @@ void free_msg(struct msg_msg *msg)
 	kfree(msg);
 	while (seg != NULL) {
 		struct msg_msgseg *tmp = seg->next;
+
+		cond_resched();
 		kfree(seg);
 		seg = tmp;
 	}
-- 
2.20.1

[PATCH 4.9 005/117] ARM: prevent tracing IPI_CPU_BACKTRACE

[Greg Kroah-Hartman]

[ Upstream commit be167862ae7dd85c56d385209a4890678e1b0488 ]

Patch series "compiler: allow all arches to enable
CONFIG_OPTIMIZE_INLINING", v3.

This patch (of 11):

When function tracing for IPIs is enabled, we get a warning for an
overflow of the ipi_types array with the IPI_CPU_BACKTRACE type as
triggered by raise_nmi():

  arch/arm/kernel/smp.c: In function 'raise_nmi':
  arch/arm/kernel/smp.c:489:2: error: array subscript is above array bounds [-Werror=array-bounds]
    trace_ipi_raise(target, ipi_types[ipinr]);

This is a correct warning as we actually overflow the array here.

This patch raise_nmi() to call __smp_cross_call() instead of
smp_cross_call(), to avoid calling into ftrace.  For clarification, I'm
also adding a two new code comments describing how this one is special.

The warning appears to have shown up after commit e7273ff49acf ("ARM:
8488/1: Make IPI_CPU_BACKTRACE a "non-secure" SGI"), which changed the
number assignment from '15' to '8', but as far as I can tell has existed
since the IPI tracepoints were first introduced.  If we decide to
backport this patch to stable kernels, we probably need to backport
e7273ff49acf as well.

[yamada.masahiro@socionext.com: rebase on v5.1-rc1]
Link: http://lkml.kernel.org/r/20190423034959.13525-2-yamada.masahiro@socionext.com
Fixes: e7273ff49acf ("ARM: 8488/1: Make IPI_CPU_BACKTRACE a "non-secure" SGI")
Fixes: 365ec7b17327 ("ARM: add IPI tracepoints") # v3.17
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Mathieu Malaterre <malat@debian.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Stefan Agner <stefan@agner.ch>
Cc: Boris Brezillon <bbrezillon@kernel.org>
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Brian Norris <computersforpeace@gmail.com>
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Borislav Petkov <bp@suse.de>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/include/asm/hardirq.h | 1 +
 arch/arm/kernel/smp.c          | 6 +++++-
 2 files changed, 6 insertions(+), 1 deletion(-)

diff --git a/arch/arm/include/asm/hardirq.h b/arch/arm/include/asm/hardirq.h
index 3d7351c844aa..2fd0a2619b0b 100644
--- a/arch/arm/include/asm/hardirq.h
+++ b/arch/arm/include/asm/hardirq.h
@@ -5,6 +5,7 @@
 #include <linux/threads.h>
 #include <asm/irq.h>
 
+/* number of IPIS _not_ including IPI_CPU_BACKTRACE */
 #define NR_IPI	7
 
 typedef struct {
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index 7a5dc011c523..deea60f01d24 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -75,6 +75,10 @@ enum ipi_msg_type {
 	IPI_CPU_STOP,
 	IPI_IRQ_WORK,
 	IPI_COMPLETION,
+	/*
+	 * CPU_BACKTRACE is special and not included in NR_IPI
+	 * or tracable with trace_ipi_*
+	 */
 	IPI_CPU_BACKTRACE,
 	/*
 	 * SGI8-15 can be reserved by secure firmware, and thus may
@@ -801,7 +805,7 @@ core_initcall(register_cpufreq_notifier);
 
 static void raise_nmi(cpumask_t *mask)
 {
-	smp_cross_call(mask, IPI_CPU_BACKTRACE);
+	__smp_cross_call(mask, IPI_CPU_BACKTRACE);
 }
 
 void arch_trigger_cpumask_backtrace(const cpumask_t *mask, bool exclude_self)
-- 
2.20.1

[PATCH 4.9 006/117] hugetlbfs: on restore reserve error path retain subpool reservation

[Greg Kroah-Hartman]

[ Upstream commit 0919e1b69ab459e06df45d3ba6658d281962db80 ]

When a huge page is allocated, PagePrivate() is set if the allocation
consumed a reservation.  When freeing a huge page, PagePrivate is checked.
If set, it indicates the reservation should be restored.  PagePrivate
being set at free huge page time mostly happens on error paths.

When huge page reservations are created, a check is made to determine if
the mapping is associated with an explicitly mounted filesystem.  If so,
pages are also reserved within the filesystem.  The default action when
freeing a huge page is to decrement the usage count in any associated
explicitly mounted filesystem.  However, if the reservation is to be
restored the reservation/use count within the filesystem should not be
decrementd.  Otherwise, a subsequent page allocation and free for the same
mapping location will cause the file filesystem usage to go 'negative'.

Filesystem                         Size  Used Avail Use% Mounted on
nodev                              4.0G -4.0M  4.1G    - /opt/hugepool

To fix, when freeing a huge page do not adjust filesystem usage if
PagePrivate() is set to indicate the reservation should be restored.

I did not cc stable as the problem has been around since reserves were
added to hugetlbfs and nobody has noticed.

Link: http://lkml.kernel.org/r/20190328234704.27083-2-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 mm/hugetlb.c | 21 ++++++++++++++++-----
 1 file changed, 16 insertions(+), 5 deletions(-)

diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index 6b03cd9b6d37..9914da93069e 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -1247,12 +1247,23 @@ void free_huge_page(struct page *page)
 	ClearPagePrivate(page);
 
 	/*
-	 * A return code of zero implies that the subpool will be under its
-	 * minimum size if the reservation is not restored after page is free.
-	 * Therefore, force restore_reserve operation.
+	 * If PagePrivate() was set on page, page allocation consumed a
+	 * reservation.  If the page was associated with a subpool, there
+	 * would have been a page reserved in the subpool before allocation
+	 * via hugepage_subpool_get_pages().  Since we are 'restoring' the
+	 * reservtion, do not call hugepage_subpool_put_pages() as this will
+	 * remove the reserved page from the subpool.
 	 */
-	if (hugepage_subpool_put_pages(spool, 1) == 0)
-		restore_reserve = true;
+	if (!restore_reserve) {
+		/*
+		 * A return code of zero implies that the subpool will be
+		 * under its minimum size if the reservation is not restored
+		 * after page is free.  Therefore, force restore_reserve
+		 * operation.
+		 */
+		if (hugepage_subpool_put_pages(spool, 1) == 0)
+			restore_reserve = true;
+	}
 
 	spin_lock(&hugetlb_lock);
 	clear_page_huge_active(page);
-- 
2.20.1

[PATCH 4.9 007/117] mem-hotplug: fix node spanned pages when we have a node with only ZONE_MOVABLE

[Greg Kroah-Hartman]

[ Upstream commit 299c83dce9ea3a79bb4b5511d2cb996b6b8e5111 ]

342332e6a925 ("mm/page_alloc.c: introduce kernelcore=mirror option") and
later patches rewrote the calculation of node spanned pages.

e506b99696a2 ("mem-hotplug: fix node spanned pages when we have a movable
node"), but the current code still has problems,

When we have a node with only zone_movable and the node id is not zero,
the size of node spanned pages is double added.

That's because we have an empty normal zone, and zone_start_pfn or
zone_end_pfn is not between arch_zone_lowest_possible_pfn and
arch_zone_highest_possible_pfn, so we need to use clamp to constrain the
range just like the commit <96e907d13602> (bootmem: Reimplement
__absent_pages_in_range() using for_each_mem_pfn_range()).

e.g.
Zone ranges:
  DMA      [mem 0x0000000000001000-0x0000000000ffffff]
  DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
  Normal   [mem 0x0000000100000000-0x000000023fffffff]
Movable zone start for each node
  Node 0: 0x0000000100000000
  Node 1: 0x0000000140000000
Early memory node ranges
  node   0: [mem 0x0000000000001000-0x000000000009efff]
  node   0: [mem 0x0000000000100000-0x00000000bffdffff]
  node   0: [mem 0x0000000100000000-0x000000013fffffff]
  node   1: [mem 0x0000000140000000-0x000000023fffffff]

node 0 DMA	spanned:0xfff   present:0xf9e   absent:0x61
node 0 DMA32	spanned:0xff000 present:0xbefe0	absent:0x40020
node 0 Normal	spanned:0	present:0	absent:0
node 0 Movable	spanned:0x40000 present:0x40000 absent:0
On node 0 totalpages(node_present_pages): 1048446
node_spanned_pages:1310719
node 1 DMA	spanned:0	    present:0		absent:0
node 1 DMA32	spanned:0	    present:0		absent:0
node 1 Normal	spanned:0x100000    present:0x100000	absent:0
node 1 Movable	spanned:0x100000    present:0x100000	absent:0
On node 1 totalpages(node_present_pages): 2097152
node_spanned_pages:2097152
Memory: 6967796K/12582392K available (16388K kernel code, 3686K rwdata,
4468K rodata, 2160K init, 10444K bss, 5614596K reserved, 0K
cma-reserved)

It shows that the current memory of node 1 is double added.
After this patch, the problem is fixed.

node 0 DMA	spanned:0xfff   present:0xf9e   absent:0x61
node 0 DMA32	spanned:0xff000 present:0xbefe0	absent:0x40020
node 0 Normal	spanned:0	present:0	absent:0
node 0 Movable	spanned:0x40000 present:0x40000 absent:0
On node 0 totalpages(node_present_pages): 1048446
node_spanned_pages:1310719
node 1 DMA	spanned:0	    present:0		absent:0
node 1 DMA32	spanned:0	    present:0		absent:0
node 1 Normal	spanned:0	    present:0		absent:0
node 1 Movable	spanned:0x100000    present:0x100000	absent:0
On node 1 totalpages(node_present_pages): 1048576
node_spanned_pages:1048576
memory: 6967796K/8388088K available (16388K kernel code, 3686K rwdata,
4468K rodata, 2160K init, 10444K bss, 1420292K reserved, 0K
cma-reserved)

Link: http://lkml.kernel.org/r/1554178276-10372-1-git-send-email-fanglinxu@huawei.com
Signed-off-by: Linxu Fang <fanglinxu@huawei.com>
Cc: Taku Izumi <izumi.taku@jp.fujitsu.com>
Cc: Xishi Qiu <qiuxishi@huawei.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Pavel Tatashin <pavel.tatashin@microsoft.com>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 mm/page_alloc.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 05f141e39ac1..13a642192e12 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -5491,13 +5491,15 @@ static unsigned long __meminit zone_spanned_pages_in_node(int nid,
 					unsigned long *zone_end_pfn,
 					unsigned long *ignored)
 {
+	unsigned long zone_low = arch_zone_lowest_possible_pfn[zone_type];
+	unsigned long zone_high = arch_zone_highest_possible_pfn[zone_type];
 	/* When hotadd a new node from cpu_up(), the node should be empty */
 	if (!node_start_pfn && !node_end_pfn)
 		return 0;
 
 	/* Get the start and end of the zone */
-	*zone_start_pfn = arch_zone_lowest_possible_pfn[zone_type];
-	*zone_end_pfn = arch_zone_highest_possible_pfn[zone_type];
+	*zone_start_pfn = clamp(node_start_pfn, zone_low, zone_high);
+	*zone_end_pfn = clamp(node_end_pfn, zone_low, zone_high);
 	adjust_zone_range_for_zone_movable(nid, zone_type,
 				node_start_pfn, node_end_pfn,
 				zone_start_pfn, zone_end_pfn);
-- 
2.20.1

[PATCH 4.9 008/117] mm/cma.c: fix crash on CMA allocation if bitmap allocation fails

[Greg Kroah-Hartman]

[ Upstream commit 1df3a339074e31db95c4790ea9236874b13ccd87 ]

f022d8cb7ec7 ("mm: cma: Don't crash on allocation if CMA area can't be
activated") fixes the crash issue when activation fails via setting
cma->count as 0, same logic exists if bitmap allocation fails.

Link: http://lkml.kernel.org/r/20190325081309.6004-1-zbestahu@gmail.com
Signed-off-by: Yue Hu <huyue2@yulong.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 mm/cma.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/mm/cma.c b/mm/cma.c
index b5d8847497a3..4ea0f32761c1 100644
--- a/mm/cma.c
+++ b/mm/cma.c
@@ -100,8 +100,10 @@ static int __init cma_activate_area(struct cma *cma)
 
 	cma->bitmap = kzalloc(bitmap_size, GFP_KERNEL);
 
-	if (!cma->bitmap)
+	if (!cma->bitmap) {
+		cma->count = 0;
 		return -ENOMEM;
+	}
 
 	WARN_ON_ONCE(!pfn_valid(pfn));
 	zone = page_zone(pfn_to_page(pfn));
-- 
2.20.1

[PATCH 4.9 009/117] mm/cma_debug.c: fix the break condition in cma_maxchunk_get()

[Greg Kroah-Hartman]

[ Upstream commit f0fd50504a54f5548eb666dc16ddf8394e44e4b7 ]

If not find zero bit in find_next_zero_bit(), it will return the size
parameter passed in, so the start bit should be compared with bitmap_maxno
rather than cma->count.  Although getting maxchunk is working fine due to
zero value of order_per_bit currently, the operation will be stuck if
order_per_bit is set as non-zero.

Link: http://lkml.kernel.org/r/20190319092734.276-1-zbestahu@gmail.com
Signed-off-by: Yue Hu <huyue2@yulong.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Joe Perches <joe@perches.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dmitry Safonov <d.safonov@partner.samsung.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 mm/cma_debug.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/mm/cma_debug.c b/mm/cma_debug.c
index f8e4b60db167..da50dab56b70 100644
--- a/mm/cma_debug.c
+++ b/mm/cma_debug.c
@@ -57,7 +57,7 @@ static int cma_maxchunk_get(void *data, u64 *val)
 	mutex_lock(&cma->lock);
 	for (;;) {
 		start = find_next_zero_bit(cma->bitmap, bitmap_maxno, end);
-		if (start >= cma->count)
+		if (start >= bitmap_maxno)
 			break;
 		end = find_next_bit(cma->bitmap, bitmap_maxno, start);
 		maxchunk = max(end - start, maxchunk);
-- 
2.20.1

[PATCH 4.9 010/117] mm/slab.c: fix an infinite loop in leaks_show()

[Greg Kroah-Hartman]

[ Upstream commit 745e10146c31b1c6ed3326286704ae251b17f663 ]

"cat /proc/slab_allocators" could hang forever on SMP machines with
kmemleak or object debugging enabled due to other CPUs running do_drain()
will keep making kmemleak_object or debug_objects_cache dirty and unable
to escape the first loop in leaks_show(),

do {
	set_store_user_clean(cachep);
	drain_cpu_caches(cachep);
	...

} while (!is_store_user_clean(cachep));

For example,

do_drain
  slabs_destroy
    slab_destroy
      kmem_cache_free
        __cache_free
          ___cache_free
            kmemleak_free_recursive
              delete_object_full
                __delete_object
                  put_object
                    free_object_rcu
                      kmem_cache_free
                        cache_free_debugcheck --> dirty kmemleak_object

One approach is to check cachep->name and skip both kmemleak_object and
debug_objects_cache in leaks_show().  The other is to set store_user_clean
after drain_cpu_caches() which leaves a small window between
drain_cpu_caches() and set_store_user_clean() where per-CPU caches could
be dirty again lead to slightly wrong information has been stored but
could also speed up things significantly which sounds like a good
compromise.  For example,

 # cat /proc/slab_allocators
 0m42.778s # 1st approach
 0m0.737s  # 2nd approach

[akpm@linux-foundation.org: tweak comment]
Link: http://lkml.kernel.org/r/20190411032635.10325-1-cai@lca.pw
Fixes: d31676dfde25 ("mm/slab: alternative implementation for DEBUG_SLAB_LEAK")
Signed-off-by: Qian Cai <cai@lca.pw>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 mm/slab.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/mm/slab.c b/mm/slab.c
index d2c0499c6b15..9547f02b4af9 100644
--- a/mm/slab.c
+++ b/mm/slab.c
@@ -4365,8 +4365,12 @@ static int leaks_show(struct seq_file *m, void *p)
 	 * whole processing.
 	 */
 	do {
-		set_store_user_clean(cachep);
 		drain_cpu_caches(cachep);
+		/*
+		 * drain_cpu_caches() could make kmemleak_object and
+		 * debug_objects_cache dirty, so reset afterwards.
+		 */
+		set_store_user_clean(cachep);
 
 		x[1] = 0;
 
-- 
2.20.1

[PATCH 4.9 011/117] kernel/sys.c: prctl: fix false positive in validate_prctl_map()

[Greg Kroah-Hartman]

[ Upstream commit a9e73998f9d705c94a8dca9687633adc0f24a19a ]

While validating new map we require the @start_data to be strictly less
than @end_data, which is fine for regular applications (this is why this
nit didn't trigger for that long).  These members are set from executable
loaders such as elf handers, still it is pretty valid to have a loadable
data section with zero size in file, in such case the start_data is equal
to end_data once kernel loader finishes.

As a result when we're trying to restore such programs the procedure fails
and the kernel returns -EINVAL.  From the image dump of a program:

 | "mm_start_code": "0x400000",
 | "mm_end_code": "0x8f5fb4",
 | "mm_start_data": "0xf1bfb0",
 | "mm_end_data": "0xf1bfb0",

Thus we need to change validate_prctl_map from strictly less to less or
equal operator use.

Link: http://lkml.kernel.org/r/20190408143554.GY1421@uranus.lan
Fixes: f606b77f1a9e3 ("prctl: PR_SET_MM -- introduce PR_SET_MM_MAP operation")
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Andrey Vagin <avagin@gmail.com>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: Pavel Emelyanov <xemul@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/sys.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/kernel/sys.c b/kernel/sys.c
index 6c4e9b533258..157277cbf83a 100644
--- a/kernel/sys.c
+++ b/kernel/sys.c
@@ -1762,7 +1762,7 @@ static int validate_prctl_map(struct prctl_mm_map *prctl_map)
 	((unsigned long)prctl_map->__m1 __op				\
 	 (unsigned long)prctl_map->__m2) ? 0 : -EINVAL
 	error  = __prctl_check_order(start_code, <, end_code);
-	error |= __prctl_check_order(start_data, <, end_data);
+	error |= __prctl_check_order(start_data,<=, end_data);
 	error |= __prctl_check_order(start_brk, <=, brk);
 	error |= __prctl_check_order(arg_start, <=, arg_end);
 	error |= __prctl_check_order(env_start, <=, env_end);
-- 
2.20.1

[PATCH 4.9 012/117] drivers: thermal: tsens: Dont print error message on -EPROBE_DEFER

[Greg Kroah-Hartman]

[ Upstream commit fc7d18cf6a923cde7f5e7ba2c1105bb106d3e29a ]

We print a calibration failure message on -EPROBE_DEFER from
nvmem/qfprom as follows:
[    3.003090] qcom-tsens 4a9000.thermal-sensor: version: 1.4
[    3.005376] qcom-tsens 4a9000.thermal-sensor: tsens calibration failed
[    3.113248] qcom-tsens 4a9000.thermal-sensor: version: 1.4

This confuses people when, in fact, calibration succeeds later when
nvmem/qfprom device is available. Don't print this message on a
-EPROBE_DEFER.

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/thermal/qcom/tsens.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c
index 3f9fe6aa51cc..ebbe1ec7b9e8 100644
--- a/drivers/thermal/qcom/tsens.c
+++ b/drivers/thermal/qcom/tsens.c
@@ -162,7 +162,8 @@ static int tsens_probe(struct platform_device *pdev)
 	if (tmdev->ops->calibrate) {
 		ret = tmdev->ops->calibrate(tmdev);
 		if (ret < 0) {
-			dev_err(dev, "tsens calibration failed\n");
+			if (ret != -EPROBE_DEFER)
+				dev_err(dev, "tsens calibration failed\n");
 			return ret;
 		}
 	}
-- 
2.20.1

[PATCH 4.9 013/117] mfd: tps65912-spi: Add missing of table registration

[Greg Kroah-Hartman]

[ Upstream commit 9e364e87ad7f2c636276c773d718cda29d62b741 ]

MODULE_DEVICE_TABLE(of, <of_match_table> should be called to complete DT
OF mathing mechanism and register it.

Before this patch:
modinfo drivers/mfd/tps65912-spi.ko | grep alias
alias:          spi:tps65912

After this patch:
modinfo drivers/mfd/tps65912-spi.ko | grep alias
alias:          of:N*T*Cti,tps65912C*
alias:          of:N*T*Cti,tps65912
alias:          spi:tps65912

Reported-by: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Daniel Gomez <dagmcr@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mfd/tps65912-spi.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/mfd/tps65912-spi.c b/drivers/mfd/tps65912-spi.c
index 4aeba9b6942a..ec37cfe32ca3 100644
--- a/drivers/mfd/tps65912-spi.c
+++ b/drivers/mfd/tps65912-spi.c
@@ -27,6 +27,7 @@ static const struct of_device_id tps65912_spi_of_match_table[] = {
 	{ .compatible = "ti,tps65912", },
 	{ /* sentinel */ }
 };
+MODULE_DEVICE_TABLE(of, tps65912_spi_of_match_table);
 
 static int tps65912_spi_probe(struct spi_device *spi)
 {
-- 
2.20.1

[PATCH 4.9 014/117] mfd: intel-lpss: Set the device in reset state when init

[Greg Kroah-Hartman]

[ Upstream commit dad06532292d77f37fbe831a02948a593500f682 ]

In virtualized setup, when system reboots due to warm
reset interrupt storm is seen.

Call Trace:
<IRQ>
dump_stack+0x70/0xa5
__report_bad_irq+0x2e/0xc0
note_interrupt+0x248/0x290
? add_interrupt_randomness+0x30/0x220
handle_irq_event_percpu+0x54/0x80
handle_irq_event+0x39/0x60
handle_fasteoi_irq+0x91/0x150
handle_irq+0x108/0x180
do_IRQ+0x52/0xf0
common_interrupt+0xf/0xf
</IRQ>
RIP: 0033:0x76fc2cfabc1d
Code: 24 28 bf 03 00 00 00 31 c0 48 8d 35 63 77 0e 00 48 8d 15 2e
94 0e 00 4c 89 f9 49 89 d9 4c 89 d3 e8 b8 e2 01 00 48 8b 54 24 18
<48> 89 ef 48 89 de 4c 89 e1 e8 d5 97 01 00 84 c0 74 2d 48 8b 04
24
RSP: 002b:00007ffd247c1fc0 EFLAGS: 00000293 ORIG_RAX: ffffffffffffffda
RAX: 0000000000000000 RBX: 00007ffd247c1ff0 RCX: 000000000003d3ce
RDX: 0000000000000000 RSI: 00007ffd247c1ff0 RDI: 000076fc2cbb6010
RBP: 000076fc2cded010 R08: 00007ffd247c2210 R09: 00007ffd247c22a0
R10: 000076fc29465470 R11: 0000000000000000 R12: 00007ffd247c1fc0
R13: 000076fc2ce8e470 R14: 000076fc27ec9960 R15: 0000000000000414
handlers:
[<000000000d3fa913>] idma64_irq
Disabling IRQ #27

To avoid interrupt storm, set the device in reset state
before bringing out the device from reset state.

Changelog v2:
- correct the subject line by adding "mfd: "

Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mfd/intel-lpss.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/mfd/intel-lpss.c b/drivers/mfd/intel-lpss.c
index 19ac8bc8e7ea..22dd8c055048 100644
--- a/drivers/mfd/intel-lpss.c
+++ b/drivers/mfd/intel-lpss.c
@@ -273,6 +273,9 @@ static void intel_lpss_init_dev(const struct intel_lpss *lpss)
 {
 	u32 value = LPSS_PRIV_SSP_REG_DIS_DMA_FIN;
 
+	/* Set the device in reset state */
+	writel(0, lpss->priv + LPSS_PRIV_RESETS);
+
 	intel_lpss_deassert_reset(lpss);
 
 	intel_lpss_set_remap_addr(lpss);
-- 
2.20.1

[PATCH 4.9 015/117] mfd: twl6040: Fix device init errors for ACCCTL register

[Greg Kroah-Hartman]

[ Upstream commit 48171d0ea7caccf21c9ee3ae75eb370f2a756062 ]

I noticed that we can get a -EREMOTEIO errors on at least omap4 duovero:

twl6040 0-004b: Failed to write 2d = 19: -121

And then any following register access will produce errors.

There 2d offset above is register ACCCTL that gets written on twl6040
powerup. With error checking added to the related regcache_sync() call,
the -EREMOTEIO error is reproducable on twl6040 powerup at least
duovero.

To fix the error, we need to wait until twl6040 is accessible after the
powerup. Based on tests on omap4 duovero, we need to wait over 8ms after
powerup before register write will complete without failures. Let's also
make sure we warn about possible errors too.

Note that we have twl6040_patch[] reg_sequence with the ACCCTL register
configuration and regcache_sync() will write the new value to ACCCTL.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mfd/twl6040.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

diff --git a/drivers/mfd/twl6040.c b/drivers/mfd/twl6040.c
index dd19f17a1b63..2b8c479dbfa6 100644
--- a/drivers/mfd/twl6040.c
+++ b/drivers/mfd/twl6040.c
@@ -322,8 +322,19 @@ int twl6040_power(struct twl6040 *twl6040, int on)
 			}
 		}
 
+		/*
+		 * Register access can produce errors after power-up unless we
+		 * wait at least 8ms based on measurements on duovero.
+		 */
+		usleep_range(10000, 12000);
+
 		/* Sync with the HW */
-		regcache_sync(twl6040->regmap);
+		ret = regcache_sync(twl6040->regmap);
+		if (ret) {
+			dev_err(twl6040->dev, "Failed to sync with the HW: %i\n",
+				ret);
+			goto out;
+		}
 
 		/* Default PLL configuration after power up */
 		twl6040->pll = TWL6040_SYSCLK_SEL_LPPLL;
-- 
2.20.1

[PATCH 4.9 016/117] perf/x86/intel: Allow PEBS multi-entry in watermark mode

[Greg Kroah-Hartman]

[ Upstream commit c7a286577d7592720c2f179aadfb325a1ff48c95 ]

This patch fixes a restriction/bug introduced by:

   583feb08e7f7 ("perf/x86/intel: Fix handling of wakeup_events for multi-entry PEBS")

The original patch prevented using multi-entry PEBS when wakeup_events != 0.
However given that wakeup_events is part of a union with wakeup_watermark, it
means that in watermark mode, PEBS multi-entry is also disabled which is not the
intent. This patch fixes this by checking is watermark mode is enabled.

Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: jolsa@redhat.com
Cc: kan.liang@intel.com
Cc: vincent.weaver@maine.edu
Fixes: 583feb08e7f7 ("perf/x86/intel: Fix handling of wakeup_events for multi-entry PEBS")
Link: http://lkml.kernel.org/r/20190514003400.224340-1-eranian@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/events/intel/core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/events/intel/core.c b/arch/x86/events/intel/core.c
index cb8178a2783a..e98e238d3775 100644
--- a/arch/x86/events/intel/core.c
+++ b/arch/x86/events/intel/core.c
@@ -2867,7 +2867,7 @@ static int intel_pmu_hw_config(struct perf_event *event)
 		return ret;
 
 	if (event->attr.precise_ip) {
-		if (!(event->attr.freq || event->attr.wakeup_events)) {
+		if (!(event->attr.freq || (event->attr.wakeup_events && !event->attr.watermark))) {
 			event->hw.flags |= PERF_X86_EVENT_AUTO_RELOAD;
 			if (!(event->attr.sample_type &
 			      ~intel_pmu_free_running_flags(event)))
-- 
2.20.1

[PATCH 4.9 017/117] drm/bridge: adv7511: Fix low refresh rate selection

[Greg Kroah-Hartman]

[ Upstream commit 67793bd3b3948dc8c8384b6430e036a30a0ecb43 ]

The driver currently sets register 0xfb (Low Refresh Rate) based on the
value of mode->vrefresh. Firstly, this field is specified to be in Hz,
but the magic numbers used by the code are Hz * 1000. This essentially
leads to the low refresh rate always being set to 0x01, since the
vrefresh value will always be less than 24000. Fix the magic numbers to
be in Hz.
Secondly, according to the comment in drm_modes.h, the field is not
supposed to be used in a functional way anyway. Instead, use the helper
function drm_mode_vrefresh().

Fixes: 9c8af882bf12 ("drm: Add adv7511 encoder driver")
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Matt Redfearn <matt.redfearn@thinci.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190424132210.26338-1-matt.redfearn@thinci.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
index 32ab5c32834b..1b2fae915ecc 100644
--- a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
+++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
@@ -735,11 +735,11 @@ static void adv7511_mode_set(struct adv7511 *adv7511,
 			vsync_polarity = 1;
 	}
 
-	if (mode->vrefresh <= 24000)
+	if (drm_mode_vrefresh(mode) <= 24)
 		low_refresh_rate = ADV7511_LOW_REFRESH_RATE_24HZ;
-	else if (mode->vrefresh <= 25000)
+	else if (drm_mode_vrefresh(mode) <= 25)
 		low_refresh_rate = ADV7511_LOW_REFRESH_RATE_25HZ;
-	else if (mode->vrefresh <= 30000)
+	else if (drm_mode_vrefresh(mode) <= 30)
 		low_refresh_rate = ADV7511_LOW_REFRESH_RATE_30HZ;
 	else
 		low_refresh_rate = ADV7511_LOW_REFRESH_RATE_NONE;
-- 
2.20.1

[PATCH 4.9 018/117] objtool: Dont use ignore flag for fake jumps

[Greg Kroah-Hartman]

[ Upstream commit e6da9567959e164f82bc81967e0d5b10dee870b4 ]

The ignore flag is set on fake jumps in order to keep
add_jump_destinations() from setting their jump_dest, since it already
got set when the fake jump was created.

But using the ignore flag is a bit of a hack.  It's normally used to
skip validation of an instruction, which doesn't really make sense for
fake jumps.

Also, after the next patch, using the ignore flag for fake jumps can
trigger a false "why am I validating an ignored function?" warning.

Instead just add an explicit check in add_jump_destinations() to skip
fake jumps.

Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/71abc072ff48b2feccc197723a9c52859476c068.1557766718.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/objtool/check.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/tools/objtool/check.c b/tools/objtool/check.c
index ae3446768181..95326c6a7a24 100644
--- a/tools/objtool/check.c
+++ b/tools/objtool/check.c
@@ -28,6 +28,8 @@
 #include <linux/hashtable.h>
 #include <linux/kernel.h>
 
+#define FAKE_JUMP_OFFSET -1
+
 struct alternative {
 	struct list_head list;
 	struct instruction *insn;
@@ -498,7 +500,7 @@ static int add_jump_destinations(struct objtool_file *file)
 		    insn->type != INSN_JUMP_UNCONDITIONAL)
 			continue;
 
-		if (insn->ignore)
+		if (insn->ignore || insn->offset == FAKE_JUMP_OFFSET)
 			continue;
 
 		rela = find_rela_by_dest_range(insn->sec, insn->offset,
@@ -645,10 +647,10 @@ static int handle_group_alt(struct objtool_file *file,
 		clear_insn_state(&fake_jump->state);
 
 		fake_jump->sec = special_alt->new_sec;
-		fake_jump->offset = -1;
+		fake_jump->offset = FAKE_JUMP_OFFSET;
 		fake_jump->type = INSN_JUMP_UNCONDITIONAL;
 		fake_jump->jump_dest = list_next_entry(last_orig_insn, list);
-		fake_jump->ignore = true;
+		fake_jump->func = orig_insn->func;
 	}
 
 	if (!special_alt->new_len) {
-- 
2.20.1

[PATCH 4.9 019/117] pwm: meson: Use the spin-lock only to protect register modifications

[Greg Kroah-Hartman]

[ Upstream commit f173747fffdf037c791405ab4f1ec0eb392fc48e ]

Holding the spin-lock for all of the code in meson_pwm_apply() can
result in a "BUG: scheduling while atomic". This can happen because
clk_get_rate() (which is called from meson_pwm_calc()) may sleep.
Only hold the spin-lock when modifying registers to solve this.

The reason why we need a spin-lock in the driver is because the
REG_MISC_AB register is shared between the two channels provided by one
PWM controller. The only functions where REG_MISC_AB is modified are
meson_pwm_enable() and meson_pwm_disable() so the register reads/writes
in there need to be protected by the spin-lock.

The original code also used the spin-lock to protect the values in
struct meson_pwm_channel. This could be necessary if two consumers can
use the same PWM channel. However, PWM core doesn't allow this so we
don't need to protect the values in struct meson_pwm_channel with a
lock.

Fixes: 211ed630753d2f ("pwm: Add support for Meson PWM Controller")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pwm/pwm-meson.c | 25 +++++++++++++++++--------
 1 file changed, 17 insertions(+), 8 deletions(-)

diff --git a/drivers/pwm/pwm-meson.c b/drivers/pwm/pwm-meson.c
index 9d5bd7d5c610..f58a4867b519 100644
--- a/drivers/pwm/pwm-meson.c
+++ b/drivers/pwm/pwm-meson.c
@@ -110,6 +110,10 @@ struct meson_pwm {
 	const struct meson_pwm_data *data;
 	void __iomem *base;
 	u8 inverter_mask;
+	/*
+	 * Protects register (write) access to the REG_MISC_AB register
+	 * that is shared between the two PWMs.
+	 */
 	spinlock_t lock;
 };
 
@@ -230,6 +234,7 @@ static void meson_pwm_enable(struct meson_pwm *meson,
 {
 	u32 value, clk_shift, clk_enable, enable;
 	unsigned int offset;
+	unsigned long flags;
 
 	switch (id) {
 	case 0:
@@ -250,6 +255,8 @@ static void meson_pwm_enable(struct meson_pwm *meson,
 		return;
 	}
 
+	spin_lock_irqsave(&meson->lock, flags);
+
 	value = readl(meson->base + REG_MISC_AB);
 	value &= ~(MISC_CLK_DIV_MASK << clk_shift);
 	value |= channel->pre_div << clk_shift;
@@ -262,11 +269,14 @@ static void meson_pwm_enable(struct meson_pwm *meson,
 	value = readl(meson->base + REG_MISC_AB);
 	value |= enable;
 	writel(value, meson->base + REG_MISC_AB);
+
+	spin_unlock_irqrestore(&meson->lock, flags);
 }
 
 static void meson_pwm_disable(struct meson_pwm *meson, unsigned int id)
 {
 	u32 value, enable;
+	unsigned long flags;
 
 	switch (id) {
 	case 0:
@@ -281,9 +291,13 @@ static void meson_pwm_disable(struct meson_pwm *meson, unsigned int id)
 		return;
 	}
 
+	spin_lock_irqsave(&meson->lock, flags);
+
 	value = readl(meson->base + REG_MISC_AB);
 	value &= ~enable;
 	writel(value, meson->base + REG_MISC_AB);
+
+	spin_unlock_irqrestore(&meson->lock, flags);
 }
 
 static int meson_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
@@ -291,19 +305,16 @@ static int meson_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
 {
 	struct meson_pwm_channel *channel = pwm_get_chip_data(pwm);
 	struct meson_pwm *meson = to_meson_pwm(chip);
-	unsigned long flags;
 	int err = 0;
 
 	if (!state)
 		return -EINVAL;
 
-	spin_lock_irqsave(&meson->lock, flags);
-
 	if (!state->enabled) {
 		meson_pwm_disable(meson, pwm->hwpwm);
 		channel->state.enabled = false;
 
-		goto unlock;
+		return 0;
 	}
 
 	if (state->period != channel->state.period ||
@@ -324,7 +335,7 @@ static int meson_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
 		err = meson_pwm_calc(meson, channel, pwm->hwpwm,
 				     state->duty_cycle, state->period);
 		if (err < 0)
-			goto unlock;
+			return err;
 
 		channel->state.polarity = state->polarity;
 		channel->state.period = state->period;
@@ -336,9 +347,7 @@ static int meson_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
 		channel->state.enabled = true;
 	}
 
-unlock:
-	spin_unlock_irqrestore(&meson->lock, flags);
-	return err;
+	return 0;
 }
 
 static void meson_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
-- 
2.20.1

[PATCH 4.9 020/117] ntp: Allow TAI-UTC offset to be set to zero

[Greg Kroah-Hartman]

[ Upstream commit fdc6bae940ee9eb869e493990540098b8c0fd6ab ]

The ADJ_TAI adjtimex mode sets the TAI-UTC offset of the system clock.
It is typically set by NTP/PTP implementations and it is automatically
updated by the kernel on leap seconds. The initial value is zero (which
applications may interpret as unknown), but this value cannot be set by
adjtimex. This limitation seems to go back to the original "nanokernel"
implementation by David Mills.

Change the ADJ_TAI check to accept zero as a valid TAI-UTC offset in
order to allow setting it back to the initial value.

Fixes: 153b5d054ac2 ("ntp: support for TAI")
Suggested-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Link: https://lkml.kernel.org/r/20190417084833.7401-1-mlichvar@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/time/ntp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/kernel/time/ntp.c b/kernel/time/ntp.c
index 6df8927c58a5..0a16419006f3 100644
--- a/kernel/time/ntp.c
+++ b/kernel/time/ntp.c
@@ -639,7 +639,7 @@ static inline void process_adjtimex_modes(struct timex *txc,
 		time_constant = max(time_constant, 0l);
 	}
 
-	if (txc->modes & ADJ_TAI && txc->constant > 0)
+	if (txc->modes & ADJ_TAI && txc->constant >= 0)
 		*time_tai = txc->constant;
 
 	if (txc->modes & ADJ_OFFSET)
-- 
2.20.1

[PATCH 4.9 021/117] f2fs: fix to avoid panic in do_recover_data()

[Greg Kroah-Hartman]

[ Upstream commit 22d61e286e2d9097dae36f75ed48801056b77cac ]

As Jungyeon reported in bugzilla:

https://bugzilla.kernel.org/show_bug.cgi?id=203227

- Overview
When mounting the attached crafted image, following errors are reported.
Additionally, it hangs on sync after trying to mount it.

The image is intentionally fuzzed from a normal f2fs image for testing.
Compile options for F2FS are as follows.
CONFIG_F2FS_FS=y
CONFIG_F2FS_STAT_FS=y
CONFIG_F2FS_FS_XATTR=y
CONFIG_F2FS_FS_POSIX_ACL=y
CONFIG_F2FS_CHECK_FS=y

- Reproduces
mkdir test
mount -t f2fs tmp.img test
sync

- Messages
 kernel BUG at fs/f2fs/recovery.c:549!
 RIP: 0010:recover_data+0x167a/0x1780
 Call Trace:
  f2fs_recover_fsync_data+0x613/0x710
  f2fs_fill_super+0x1043/0x1aa0
  mount_bdev+0x16d/0x1a0
  mount_fs+0x4a/0x170
  vfs_kern_mount+0x5d/0x100
  do_mount+0x200/0xcf0
  ksys_mount+0x79/0xc0
  __x64_sys_mount+0x1c/0x20
  do_syscall_64+0x43/0xf0
  entry_SYSCALL_64_after_hwframe+0x44/0xa9

During recovery, if ofs_of_node is inconsistent in between recovered
node page and original checkpointed node page, let's just fail recovery
instead of making kernel panic.

Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/f2fs/recovery.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/fs/f2fs/recovery.c b/fs/f2fs/recovery.c
index e59eeaf02eaa..9de1480a86bd 100644
--- a/fs/f2fs/recovery.c
+++ b/fs/f2fs/recovery.c
@@ -407,7 +407,15 @@ retry_dn:
 
 	get_node_info(sbi, dn.nid, &ni);
 	f2fs_bug_on(sbi, ni.ino != ino_of_node(page));
-	f2fs_bug_on(sbi, ofs_of_node(dn.node_page) != ofs_of_node(page));
+
+	if (ofs_of_node(dn.node_page) != ofs_of_node(page)) {
+		f2fs_msg(sbi->sb, KERN_WARNING,
+			"Inconsistent ofs_of_node, ino:%lu, ofs:%u, %u",
+			inode->i_ino, ofs_of_node(dn.node_page),
+			ofs_of_node(page));
+		err = -EFAULT;
+		goto err;
+	}
 
 	for (; start < end; start++, dn.ofs_in_node++) {
 		block_t src, dest;
-- 
2.20.1

[PATCH 4.9 022/117] f2fs: fix to clear dirty inode in error path of f2fs_iget()

[Greg Kroah-Hartman]

[ Upstream commit 546d22f070d64a7b96f57c93333772085d3a5e6d ]

As Jungyeon reported in bugzilla:

https://bugzilla.kernel.org/show_bug.cgi?id=203217

- Overview
When mounting the attached crafted image and running program, I got this error.
Additionally, it hangs on sync after running the program.

The image is intentionally fuzzed from a normal f2fs image for testing and I enabled option CONFIG_F2FS_CHECK_FS on.

- Reproduces
cc poc_test_05.c
mkdir test
mount -t f2fs tmp.img test
sudo ./a.out
sync

- Messages
 kernel BUG at fs/f2fs/inode.c:707!
 RIP: 0010:f2fs_evict_inode+0x33f/0x3a0
 Call Trace:
  evict+0xba/0x180
  f2fs_iget+0x598/0xdf0
  f2fs_lookup+0x136/0x320
  __lookup_slow+0x92/0x140
  lookup_slow+0x30/0x50
  walk_component+0x1c1/0x350
  path_lookupat+0x62/0x200
  filename_lookup+0xb3/0x1a0
  do_readlinkat+0x56/0x110
  __x64_sys_readlink+0x16/0x20
  do_syscall_64+0x43/0xf0
  entry_SYSCALL_64_after_hwframe+0x44/0xa9

During inode loading, __recover_inline_status() can recovery inode status
and set inode dirty, once we failed in following process, it will fail
the check in f2fs_evict_inode, result in trigger BUG_ON().

Let's clear dirty inode in error path of f2fs_iget() to avoid panic.

Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/f2fs/inode.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/fs/f2fs/inode.c b/fs/f2fs/inode.c
index 1de02c31756b..c56d04ec45dc 100644
--- a/fs/f2fs/inode.c
+++ b/fs/f2fs/inode.c
@@ -288,6 +288,7 @@ make_now:
 	return inode;
 
 bad_inode:
+	f2fs_inode_synced(inode);
 	iget_failed(inode);
 	trace_f2fs_iget_exit(inode, ret);
 	return ERR_PTR(ret);
-- 
2.20.1

[PATCH 4.9 023/117] f2fs: fix to do sanity check on valid block count of segment

[Greg Kroah-Hartman]

[ Upstream commit e95bcdb2fefa129f37bd9035af1d234ca92ee4ef ]

As Jungyeon reported in bugzilla:

https://bugzilla.kernel.org/show_bug.cgi?id=203233

- Overview
When mounting the attached crafted image and running program, following errors are reported.
Additionally, it hangs on sync after running program.

The image is intentionally fuzzed from a normal f2fs image for testing.
Compile options for F2FS are as follows.
CONFIG_F2FS_FS=y
CONFIG_F2FS_STAT_FS=y
CONFIG_F2FS_FS_XATTR=y
CONFIG_F2FS_FS_POSIX_ACL=y
CONFIG_F2FS_CHECK_FS=y

- Reproduces
cc poc_13.c
mkdir test
mount -t f2fs tmp.img test
cp a.out test
cd test
sudo ./a.out
sync

- Kernel messages
 F2FS-fs (sdb): Bitmap was wrongly set, blk:4608
 kernel BUG at fs/f2fs/segment.c:2102!
 RIP: 0010:update_sit_entry+0x394/0x410
 Call Trace:
  f2fs_allocate_data_block+0x16f/0x660
  do_write_page+0x62/0x170
  f2fs_do_write_node_page+0x33/0xa0
  __write_node_page+0x270/0x4e0
  f2fs_sync_node_pages+0x5df/0x670
  f2fs_write_checkpoint+0x372/0x1400
  f2fs_sync_fs+0xa3/0x130
  f2fs_do_sync_file+0x1a6/0x810
  do_fsync+0x33/0x60
  __x64_sys_fsync+0xb/0x10
  do_syscall_64+0x43/0xf0
  entry_SYSCALL_64_after_hwframe+0x44/0xa9

sit.vblocks and sum valid block count in sit.valid_map may be
inconsistent, segment w/ zero vblocks will be treated as free
segment, while allocating in free segment, we may allocate a
free block, if its bitmap is valid previously, it can cause
kernel crash due to bitmap verification failure.

Anyway, to avoid further serious metadata inconsistence and
corruption, it is necessary and worth to detect SIT
inconsistence. So let's enable check_block_count() to verify
vblocks and valid_map all the time rather than do it only
CONFIG_F2FS_CHECK_FS is enabled.

Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/f2fs/segment.h | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/fs/f2fs/segment.h b/fs/f2fs/segment.h
index 893723978f5e..faca7fdb54b0 100644
--- a/fs/f2fs/segment.h
+++ b/fs/f2fs/segment.h
@@ -613,7 +613,6 @@ static inline void verify_block_addr(struct f2fs_io_info *fio, block_t blk_addr)
 static inline int check_block_count(struct f2fs_sb_info *sbi,
 		int segno, struct f2fs_sit_entry *raw_sit)
 {
-#ifdef CONFIG_F2FS_CHECK_FS
 	bool is_valid  = test_bit_le(0, raw_sit->valid_map) ? true : false;
 	int valid_blocks = 0;
 	int cur_pos = 0, next_pos;
@@ -640,7 +639,7 @@ static inline int check_block_count(struct f2fs_sb_info *sbi,
 		set_sbi_flag(sbi, SBI_NEED_FSCK);
 		return -EINVAL;
 	}
-#endif
+
 	/* check segment usage, and check boundary of a given segment number */
 	if (unlikely(GET_SIT_VBLOCKS(raw_sit) > sbi->blocks_per_seg
 					|| segno > TOTAL_SEGS(sbi) - 1)) {
-- 
2.20.1

[PATCH 4.9 024/117] configfs: fix possible use-after-free in configfs_register_group

[Greg Kroah-Hartman]

[ Upstream commit 35399f87e271f7cf3048eab00a421a6519ac8441 ]

In configfs_register_group(), if create_default_group() failed, we
forget to unlink the group. It will left a invalid item in the parent list,
which may trigger the use-after-free issue seen below:

BUG: KASAN: use-after-free in __list_add_valid+0xd4/0xe0 lib/list_debug.c:26
Read of size 8 at addr ffff8881ef61ae20 by task syz-executor.0/5996

CPU: 1 PID: 5996 Comm: syz-executor.0 Tainted: G         C        5.0.0+ #5
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0xa9/0x10e lib/dump_stack.c:113
 print_address_description+0x65/0x270 mm/kasan/report.c:187
 kasan_report+0x149/0x18d mm/kasan/report.c:317
 __list_add_valid+0xd4/0xe0 lib/list_debug.c:26
 __list_add include/linux/list.h:60 [inline]
 list_add_tail include/linux/list.h:93 [inline]
 link_obj+0xb0/0x190 fs/configfs/dir.c:759
 link_group+0x1c/0x130 fs/configfs/dir.c:784
 configfs_register_group+0x56/0x1e0 fs/configfs/dir.c:1751
 configfs_register_default_group+0x72/0xc0 fs/configfs/dir.c:1834
 ? 0xffffffffc1be0000
 iio_sw_trigger_init+0x23/0x1000 [industrialio_sw_trigger]
 do_one_initcall+0xbc/0x47d init/main.c:887
 do_init_module+0x1b5/0x547 kernel/module.c:3456
 load_module+0x6405/0x8c10 kernel/module.c:3804
 __do_sys_finit_module+0x162/0x190 kernel/module.c:3898
 do_syscall_64+0x9f/0x450 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x462e99
Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f494ecbcc58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99
RDX: 0000000000000000 RSI: 0000000020000180 RDI: 0000000000000003
RBP: 00007f494ecbcc70 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f494ecbd6bc
R13: 00000000004bcefa R14: 00000000006f6fb0 R15: 0000000000000004

Allocated by task 5987:
 set_track mm/kasan/common.c:87 [inline]
 __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:497
 kmalloc include/linux/slab.h:545 [inline]
 kzalloc include/linux/slab.h:740 [inline]
 configfs_register_default_group+0x4c/0xc0 fs/configfs/dir.c:1829
 0xffffffffc1bd0023
 do_one_initcall+0xbc/0x47d init/main.c:887
 do_init_module+0x1b5/0x547 kernel/module.c:3456
 load_module+0x6405/0x8c10 kernel/module.c:3804
 __do_sys_finit_module+0x162/0x190 kernel/module.c:3898
 do_syscall_64+0x9f/0x450 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Freed by task 5987:
 set_track mm/kasan/common.c:87 [inline]
 __kasan_slab_free+0x130/0x180 mm/kasan/common.c:459
 slab_free_hook mm/slub.c:1429 [inline]
 slab_free_freelist_hook mm/slub.c:1456 [inline]
 slab_free mm/slub.c:3003 [inline]
 kfree+0xe1/0x270 mm/slub.c:3955
 configfs_register_default_group+0x9a/0xc0 fs/configfs/dir.c:1836
 0xffffffffc1bd0023
 do_one_initcall+0xbc/0x47d init/main.c:887
 do_init_module+0x1b5/0x547 kernel/module.c:3456
 load_module+0x6405/0x8c10 kernel/module.c:3804
 __do_sys_finit_module+0x162/0x190 kernel/module.c:3898
 do_syscall_64+0x9f/0x450 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

The buggy address belongs to the object at ffff8881ef61ae00
 which belongs to the cache kmalloc-192 of size 192
The buggy address is located 32 bytes inside of
 192-byte region [ffff8881ef61ae00, ffff8881ef61aec0)
The buggy address belongs to the page:
page:ffffea0007bd8680 count:1 mapcount:0 mapping:ffff8881f6c03000 index:0xffff8881ef61a700
flags: 0x2fffc0000000200(slab)
raw: 02fffc0000000200 ffffea0007ca4740 0000000500000005 ffff8881f6c03000
raw: ffff8881ef61a700 000000008010000c 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff8881ef61ad00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 ffff8881ef61ad80: 00 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc
>ffff8881ef61ae00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                               ^
 ffff8881ef61ae80: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
 ffff8881ef61af00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb

Fixes: 5cf6a51e6062 ("configfs: allow dynamic group creation")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/configfs/dir.c | 17 ++++++++++++-----
 1 file changed, 12 insertions(+), 5 deletions(-)

diff --git a/fs/configfs/dir.c b/fs/configfs/dir.c
index d2a1a79fa324..d7955dc56737 100644
--- a/fs/configfs/dir.c
+++ b/fs/configfs/dir.c
@@ -1755,12 +1755,19 @@ int configfs_register_group(struct config_group *parent_group,
 
 	inode_lock_nested(d_inode(parent), I_MUTEX_PARENT);
 	ret = create_default_group(parent_group, group);
-	if (!ret) {
-		spin_lock(&configfs_dirent_lock);
-		configfs_dir_set_ready(group->cg_item.ci_dentry->d_fsdata);
-		spin_unlock(&configfs_dirent_lock);
-	}
+	if (ret)
+		goto err_out;
+
+	spin_lock(&configfs_dirent_lock);
+	configfs_dir_set_ready(group->cg_item.ci_dentry->d_fsdata);
+	spin_unlock(&configfs_dirent_lock);
+	inode_unlock(d_inode(parent));
+	return 0;
+err_out:
 	inode_unlock(d_inode(parent));
+	mutex_lock(&subsys->su_mutex);
+	unlink_group(group);
+	mutex_unlock(&subsys->su_mutex);
 	return ret;
 }
 EXPORT_SYMBOL(configfs_register_group);
-- 
2.20.1

[PATCH 4.9 025/117] uml: fix a boot splat wrt use of cpu_all_mask

[Greg Kroah-Hartman]

[ Upstream commit 689a58605b63173acb0a8cf954af6a8f60440c93 ]

Memory: 509108K/542612K available (3835K kernel code, 919K rwdata, 1028K rodata, 129K init, 211K bss, 33504K reserved, 0K cma-reserved)
NR_IRQS: 15
clocksource: timer: mask: 0xffffffffffffffff max_cycles: 0x1cd42e205, max_idle_ns: 881590404426 ns
------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at kernel/time/clockevents.c:458 clockevents_register_device+0x72/0x140
posix-timer cpumask == cpu_all_mask, using cpu_possible_mask instead
Modules linked in:
CPU: 0 PID: 0 Comm: swapper Not tainted 5.1.0-rc4-00048-ged79cc87302b #4
Stack:
 604ebda0 603c5370 604ebe20 6046fd17
 00000000 6006fcbb 604ebdb0 603c53b5
 604ebe10 6003bfc4 604ebdd0 9000001ca
Call Trace:
 [<6006fcbb>] ? printk+0x0/0x94
 [<60083160>] ? clockevents_register_device+0x72/0x140
 [<6001f16e>] show_stack+0x13b/0x155
 [<603c5370>] ? dump_stack_print_info+0xe2/0xeb
 [<6006fcbb>] ? printk+0x0/0x94
 [<603c53b5>] dump_stack+0x2a/0x2c
 [<6003bfc4>] __warn+0x10e/0x13e
 [<60070320>] ? vprintk_func+0xc8/0xcf
 [<60030fd6>] ? block_signals+0x0/0x16
 [<6006fcbb>] ? printk+0x0/0x94
 [<6003c08b>] warn_slowpath_fmt+0x97/0x99
 [<600311a1>] ? set_signals+0x0/0x3f
 [<6003bff4>] ? warn_slowpath_fmt+0x0/0x99
 [<600842cb>] ? tick_oneshot_mode_active+0x44/0x4f
 [<60030fd6>] ? block_signals+0x0/0x16
 [<6006fcbb>] ? printk+0x0/0x94
 [<6007d2d5>] ? __clocksource_select+0x20/0x1b1
 [<60030fd6>] ? block_signals+0x0/0x16
 [<6006fcbb>] ? printk+0x0/0x94
 [<60083160>] clockevents_register_device+0x72/0x140
 [<60031192>] ? get_signals+0x0/0xf
 [<60030fd6>] ? block_signals+0x0/0x16
 [<6006fcbb>] ? printk+0x0/0x94
 [<60002eec>] um_timer_setup+0xc8/0xca
 [<60001b59>] start_kernel+0x47f/0x57e
 [<600035bc>] start_kernel_proc+0x49/0x4d
 [<6006c483>] ? kmsg_dump_register+0x82/0x8a
 [<6001de62>] new_thread_handler+0x81/0xb2
 [<60003571>] ? kmsg_dumper_stdout_init+0x1a/0x1c
 [<60020c75>] uml_finishsetup+0x54/0x59

random: get_random_bytes called from init_oops_id+0x27/0x34 with crng_init=0
---[ end trace 00173d0117a88acb ]---
Calibrating delay loop... 6941.90 BogoMIPS (lpj=34709504)

Signed-off-by: Maciej Żenczykowski <maze@google.com>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: linux-um@lists.infradead.org
Cc: linux-kernel@vger.kernel.org

Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/um/kernel/time.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/um/kernel/time.c b/arch/um/kernel/time.c
index 25c23666d592..040e3efdc9a6 100644
--- a/arch/um/kernel/time.c
+++ b/arch/um/kernel/time.c
@@ -56,7 +56,7 @@ static int itimer_one_shot(struct clock_event_device *evt)
 static struct clock_event_device timer_clockevent = {
 	.name			= "posix-timer",
 	.rating			= 250,
-	.cpumask		= cpu_all_mask,
+	.cpumask		= cpu_possible_mask,
 	.features		= CLOCK_EVT_FEAT_PERIODIC |
 				  CLOCK_EVT_FEAT_ONESHOT,
 	.set_state_shutdown	= itimer_shutdown,
-- 
2.20.1

[PATCH 4.9 026/117] watchdog: imx2_wdt: Fix set_timeout for big timeout values

[Greg Kroah-Hartman]

[ Upstream commit b07e228eee69601addba98b47b1a3850569e5013 ]

The documentated behavior is: if max_hw_heartbeat_ms is implemented, the
minimum of the set_timeout argument and max_hw_heartbeat_ms should be used.
This patch implements this behavior.
Previously only the first 7bits were used and the input argument was
returned.

Signed-off-by: Georg Hofmann <georg@hofmannsweb.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/watchdog/imx2_wdt.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/watchdog/imx2_wdt.c b/drivers/watchdog/imx2_wdt.c
index 518dfa1047cb..5098982e1a58 100644
--- a/drivers/watchdog/imx2_wdt.c
+++ b/drivers/watchdog/imx2_wdt.c
@@ -181,8 +181,10 @@ static void __imx2_wdt_set_timeout(struct watchdog_device *wdog,
 static int imx2_wdt_set_timeout(struct watchdog_device *wdog,
 				unsigned int new_timeout)
 {
-	__imx2_wdt_set_timeout(wdog, new_timeout);
+	unsigned int actual;
 
+	actual = min(new_timeout, wdog->max_hw_heartbeat_ms * 1000);
+	__imx2_wdt_set_timeout(wdog, actual);
 	wdog->timeout = new_timeout;
 	return 0;
 }
-- 
2.20.1

[PATCH 4.9 027/117] watchdog: fix compile time error of pretimeout governors

[Greg Kroah-Hartman]

[ Upstream commit a223770bfa7b6647f3a70983257bd89f9cafce46 ]

CONFIG_WATCHDOG_PRETIMEOUT_GOV build symbol adds watchdog_pretimeout.o
object to watchdog.o, the latter is compiled only if CONFIG_WATCHDOG_CORE
is selected, so it rightfully makes sense to add it as a dependency.

The change fixes the next compilation errors, if CONFIG_WATCHDOG_CORE=n
and CONFIG_WATCHDOG_PRETIMEOUT_GOV=y are selected:

  drivers/watchdog/pretimeout_noop.o: In function `watchdog_gov_noop_register':
  drivers/watchdog/pretimeout_noop.c:35: undefined reference to `watchdog_register_governor'
  drivers/watchdog/pretimeout_noop.o: In function `watchdog_gov_noop_unregister':
  drivers/watchdog/pretimeout_noop.c:40: undefined reference to `watchdog_unregister_governor'

  drivers/watchdog/pretimeout_panic.o: In function `watchdog_gov_panic_register':
  drivers/watchdog/pretimeout_panic.c:35: undefined reference to `watchdog_register_governor'
  drivers/watchdog/pretimeout_panic.o: In function `watchdog_gov_panic_unregister':
  drivers/watchdog/pretimeout_panic.c:40: undefined reference to `watchdog_unregister_governor'

Reported-by: Kuo, Hsuan-Chi <hckuo2@illinois.edu>
Fixes: ff84136cb6a4 ("watchdog: add watchdog pretimeout governor framework")
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/watchdog/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 15c01830799a..d65c220d8175 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -1850,6 +1850,7 @@ comment "Watchdog Pretimeout Governors"
 
 config WATCHDOG_PRETIMEOUT_GOV
 	bool "Enable watchdog pretimeout governors"
+	depends on WATCHDOG_CORE
 	help
 	  The option allows to select watchdog pretimeout governors.
 
-- 
2.20.1

[PATCH 4.9 028/117] iommu/vt-d: Set intel_iommu_gfx_mapped correctly

[Greg Kroah-Hartman]

[ Upstream commit cf1ec4539a50bdfe688caad4615ca47646884316 ]

The intel_iommu_gfx_mapped flag is exported by the Intel
IOMMU driver to indicate whether an IOMMU is used for the
graphic device. In a virtualized IOMMU environment (e.g.
QEMU), an include-all IOMMU is used for graphic device.
This flag is found to be clear even the IOMMU is used.

Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Reported-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Fixes: c0771df8d5297 ("intel-iommu: Export a flag indicating that the IOMMU is used for iGFX.")
Suggested-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iommu/intel-iommu.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/iommu/intel-iommu.c b/drivers/iommu/intel-iommu.c
index 28feb1744710..25cc6ae87039 100644
--- a/drivers/iommu/intel-iommu.c
+++ b/drivers/iommu/intel-iommu.c
@@ -4119,9 +4119,7 @@ static void __init init_no_remapping_devices(void)
 
 		/* This IOMMU has *only* gfx devices. Either bypass it or
 		   set the gfx_mapped flag, as appropriate */
-		if (dmar_map_gfx) {
-			intel_iommu_gfx_mapped = 1;
-		} else {
+		if (!dmar_map_gfx) {
 			drhd->ignored = 1;
 			for_each_active_dev_scope(drhd->devices,
 						  drhd->devices_cnt, i, dev)
@@ -4870,6 +4868,9 @@ int __init intel_iommu_init(void)
 		goto out_free_reserved_range;
 	}
 
+	if (dmar_map_gfx)
+		intel_iommu_gfx_mapped = 1;
+
 	init_no_remapping_devices();
 
 	ret = init_dmars();
-- 
2.20.1

[PATCH 4.9 029/117] ALSA: hda - Register irq handler after the chip initialization

[Greg Kroah-Hartman]

[ Upstream commit f495222e28275222ab6fd93813bd3d462e16d340 ]

Currently the IRQ handler in HD-audio controller driver is registered
before the chip initialization.  That is, we have some window opened
between the azx_acquire_irq() call and the CORB/RIRB setup.  If an
interrupt is triggered in this small window, the IRQ handler may
access to the uninitialized RIRB buffer, which leads to a NULL
dereference Oops.

This is usually no big problem since most of Intel chips do register
the IRQ via MSI, and we've already fixed the order of the IRQ
enablement and the CORB/RIRB setup in the former commit b61749a89f82
("sound: enable interrupt after dma buffer initialization"), hence the
IRQ won't be triggered in that room.  However, some platforms use a
shared IRQ, and this may allow the IRQ trigger by another source.

Another possibility is the kdump environment: a stale interrupt might
be present in there, the IRQ handler can be falsely triggered as well.

For covering this small race, let's move the azx_acquire_irq() call
after hda_intel_init_chip() call.  Although this is a bit radical
change, it can cover more widely than checking the CORB/RIRB setup
locally in the callee side.

Reported-by: Liwei Song <liwei.song@windriver.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/pci/hda/hda_intel.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index 789eca17fc60..f2f1d9fd848c 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -1700,9 +1700,6 @@ static int azx_first_init(struct azx *chip)
 			chip->msi = 0;
 	}
 
-	if (azx_acquire_irq(chip, 0) < 0)
-		return -EBUSY;
-
 	pci_set_master(pci);
 	synchronize_irq(bus->irq);
 
@@ -1809,6 +1806,9 @@ static int azx_first_init(struct azx *chip)
 		return -ENODEV;
 	}
 
+	if (azx_acquire_irq(chip, 0) < 0)
+		return -EBUSY;
+
 	strcpy(card->driver, "HDA-Intel");
 	strlcpy(card->shortname, driver_short_names[chip->driver_type],
 		sizeof(card->shortname));
-- 
2.20.1

[PATCH 4.9 030/117] nvmem: core: fix read buffer in place

[Greg Kroah-Hartman]

[ Upstream commit 2fe518fecb3a4727393be286db9804cd82ee2d91 ]

When the bit_offset in the cell is zero, the pointer to the msb will
not be properly initialized (ie, will still be pointing to the first
byte in the buffer).

This being the case, if there are bits to clear in the msb, those will
be left untouched while the mask will incorrectly clear bit positions
on the first byte.

This commit also makes sure that any byte unused in the cell is
cleared.

Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvmem/core.c | 15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)

diff --git a/drivers/nvmem/core.c b/drivers/nvmem/core.c
index 824e282cd80e..bb2f79933b17 100644
--- a/drivers/nvmem/core.c
+++ b/drivers/nvmem/core.c
@@ -934,7 +934,7 @@ static inline void nvmem_shift_read_buffer_in_place(struct nvmem_cell *cell,
 						    void *buf)
 {
 	u8 *p, *b;
-	int i, bit_offset = cell->bit_offset;
+	int i, extra, bit_offset = cell->bit_offset;
 
 	p = b = buf;
 	if (bit_offset) {
@@ -949,11 +949,16 @@ static inline void nvmem_shift_read_buffer_in_place(struct nvmem_cell *cell,
 			p = b;
 			*b++ >>= bit_offset;
 		}
-
-		/* result fits in less bytes */
-		if (cell->bytes != DIV_ROUND_UP(cell->nbits, BITS_PER_BYTE))
-			*p-- = 0;
+	} else {
+		/* point to the msb */
+		p += cell->bytes - 1;
 	}
+
+	/* result fits in less bytes */
+	extra = cell->bytes - DIV_ROUND_UP(cell->nbits, BITS_PER_BYTE);
+	while (--extra >= 0)
+		*p-- = 0;
+
 	/* clear msb bits if any leftover in the last byte */
 	*p &= GENMASK((cell->nbits%BITS_PER_BYTE) - 1, 0);
 }
-- 
2.20.1

[PATCH 4.9 031/117] fuse: retrieve: cap requested size to negotiated max_write

[Greg Kroah-Hartman]

[ Upstream commit 7640682e67b33cab8628729afec8ca92b851394f ]

FUSE filesystem server and kernel client negotiate during initialization
phase, what should be the maximum write size the client will ever issue.
Correspondingly the filesystem server then queues sys_read calls to read
requests with buffer capacity large enough to carry request header + that
max_write bytes. A filesystem server is free to set its max_write in
anywhere in the range between [1*page, fc->max_pages*page]. In particular
go-fuse[2] sets max_write by default as 64K, wheres default fc->max_pages
corresponds to 128K. Libfuse also allows users to configure max_write, but
by default presets it to possible maximum.

If max_write is < fc->max_pages*page, and in NOTIFY_RETRIEVE handler we
allow to retrieve more than max_write bytes, corresponding prepared
NOTIFY_REPLY will be thrown away by fuse_dev_do_read, because the
filesystem server, in full correspondence with server/client contract, will
be only queuing sys_read with ~max_write buffer capacity, and
fuse_dev_do_read throws away requests that cannot fit into server request
buffer. In turn the filesystem server could get stuck waiting indefinitely
for NOTIFY_REPLY since NOTIFY_RETRIEVE handler returned OK which is
understood by clients as that NOTIFY_REPLY was queued and will be sent
back.

Cap requested size to negotiate max_write to avoid the problem.  This
aligns with the way NOTIFY_RETRIEVE handler works, which already
unconditionally caps requested retrieve size to fuse_conn->max_pages.  This
way it should not hurt NOTIFY_RETRIEVE semantic if we return less data than
was originally requested.

Please see [1] for context where the problem of stuck filesystem was hit
for real, how the situation was traced and for more involving patch that
did not make it into the tree.

[1] https://marc.info/?l=linux-fsdevel&m=155057023600853&w=2
[2] https://github.com/hanwen/go-fuse

Signed-off-by: Kirill Smelkov <kirr@nexedi.com>
Cc: Han-Wen Nienhuys <hanwen@google.com>
Cc: Jakob Unterwurzacher <jakobunt@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/fuse/dev.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/fuse/dev.c
+++ b/fs/fuse/dev.c
@@ -1668,7 +1668,7 @@ static int fuse_retrieve(struct fuse_con
 	offset = outarg->offset & ~PAGE_MASK;
 	file_size = i_size_read(inode);
 
-	num = outarg->size;
+	num = min(outarg->size, fc->max_write);
 	if (outarg->offset > file_size)
 		num = 0;
 	else if (outarg->offset + num > file_size)

[PATCH 4.9 032/117] nfsd: allow fh_want_write to be called twice

[Greg Kroah-Hartman]

[ Upstream commit 0b8f62625dc309651d0efcb6a6247c933acd8b45 ]

A fuzzer recently triggered lockdep warnings about potential sb_writers
deadlocks caused by fh_want_write().

Looks like we aren't careful to pair each fh_want_write() with an
fh_drop_write().

It's not normally a problem since fh_put() will call fh_drop_write() for
us.  And was OK for NFSv3 where we'd do one operation that might call
fh_want_write(), and then put the filehandle.

But an NFSv4 protocol fuzzer can do weird things like call unlink twice
in a compound, and then we get into trouble.

I'm a little worried about this approach of just leaving everything to
fh_put().  But I think there are probably a lot of
fh_want_write()/fh_drop_write() imbalances so for now I think we need it
to be more forgiving.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/nfsd/vfs.h | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/fs/nfsd/vfs.h b/fs/nfsd/vfs.h
index 0bf9e7bf5800..9140b9cf3870 100644
--- a/fs/nfsd/vfs.h
+++ b/fs/nfsd/vfs.h
@@ -116,8 +116,11 @@ void		nfsd_put_raparams(struct file *file, struct raparms *ra);
 
 static inline int fh_want_write(struct svc_fh *fh)
 {
-	int ret = mnt_want_write(fh->fh_export->ex_path.mnt);
+	int ret;
 
+	if (fh->fh_want_write)
+		return 0;
+	ret = mnt_want_write(fh->fh_export->ex_path.mnt);
 	if (!ret)
 		fh->fh_want_write = true;
 	return ret;
-- 
2.20.1

[PATCH 4.9 033/117] x86/PCI: Fix PCI IRQ routing table memory leak

[Greg Kroah-Hartman]

[ Upstream commit ea094d53580f40c2124cef3d072b73b2425e7bfd ]

In pcibios_irq_init(), the PCI IRQ routing table 'pirq_table' is first
found through pirq_find_routing_table().  If the table is not found and
CONFIG_PCI_BIOS is defined, the table is then allocated in
pcibios_get_irq_routing_table() using kmalloc().  Later, if the I/O APIC is
used, this table is actually not used.  In that case, the allocated table
is not freed, which is a memory leak.

Free the allocated table if it is not used.

Signed-off-by: Wenwen Wang <wang6495@umn.edu>
[bhelgaas: added Ingo's reviewed-by, since the only change since v1 was to
use the irq_routing_table local variable name he suggested]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/pci/irq.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/arch/x86/pci/irq.c b/arch/x86/pci/irq.c
index 9bd115484745..5f0e596b0519 100644
--- a/arch/x86/pci/irq.c
+++ b/arch/x86/pci/irq.c
@@ -1117,6 +1117,8 @@ static struct dmi_system_id __initdata pciirq_dmi_table[] = {
 
 void __init pcibios_irq_init(void)
 {
+	struct irq_routing_table *rtable = NULL;
+
 	DBG(KERN_DEBUG "PCI: IRQ init\n");
 
 	if (raw_pci_ops == NULL)
@@ -1127,8 +1129,10 @@ void __init pcibios_irq_init(void)
 	pirq_table = pirq_find_routing_table();
 
 #ifdef CONFIG_PCI_BIOS
-	if (!pirq_table && (pci_probe & PCI_BIOS_IRQ_SCAN))
+	if (!pirq_table && (pci_probe & PCI_BIOS_IRQ_SCAN)) {
 		pirq_table = pcibios_get_irq_routing_table();
+		rtable = pirq_table;
+	}
 #endif
 	if (pirq_table) {
 		pirq_peer_trick();
@@ -1143,8 +1147,10 @@ void __init pcibios_irq_init(void)
 		 * If we're using the I/O APIC, avoid using the PCI IRQ
 		 * routing table
 		 */
-		if (io_apic_assign_pci_irqs)
+		if (io_apic_assign_pci_irqs) {
+			kfree(rtable);
 			pirq_table = NULL;
+		}
 	}
 
 	x86_init.pci.fixup_irqs();
-- 
2.20.1

[PATCH 4.9 034/117] platform/chrome: cros_ec_proto: check for NULL transfer function

[Greg Kroah-Hartman]

[ Upstream commit 94d4e7af14a1170e34cf082d92e4c02de9e9fb88 ]

As new transfer mechanisms are added to the EC codebase, they may
not support v2 of the EC protocol.

If the v3 initial handshake transfer fails, the kernel will try
and call cmd_xfer as a fallback. If v2 is not supported, cmd_xfer
will be NULL, and the code will end up causing a kernel panic.

Add a check for NULL before calling the transfer function, along
with a helpful comment explaining how one might end up in this
situation.

Signed-off-by: Enrico Granata <egranata@chromium.org>
Reviewed-by: Jett Rink <jettrink@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/chrome/cros_ec_proto.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/drivers/platform/chrome/cros_ec_proto.c b/drivers/platform/chrome/cros_ec_proto.c
index cfa3e850c49f..d225a835a64c 100644
--- a/drivers/platform/chrome/cros_ec_proto.c
+++ b/drivers/platform/chrome/cros_ec_proto.c
@@ -67,6 +67,17 @@ static int send_command(struct cros_ec_device *ec_dev,
 	else
 		xfer_fxn = ec_dev->cmd_xfer;
 
+	if (!xfer_fxn) {
+		/*
+		 * This error can happen if a communication error happened and
+		 * the EC is trying to use protocol v2, on an underlying
+		 * communication mechanism that does not support v2.
+		 */
+		dev_err_once(ec_dev->dev,
+			     "missing EC transfer API, cannot send command\n");
+		return -EIO;
+	}
+
 	ret = (*xfer_fxn)(ec_dev, msg);
 	if (msg->result == EC_RES_IN_PROGRESS) {
 		int i;
-- 
2.20.1

[PATCH 4.9 035/117] soc: mediatek: pwrap: Zero initialize rdata in pwrap_init_cipher

[Greg Kroah-Hartman]

[ Upstream commit 89e28da82836530f1ac7a3a32fecc31f22d79b3e ]

When building with -Wsometimes-uninitialized, Clang warns:

drivers/soc/mediatek/mtk-pmic-wrap.c:1358:6: error: variable 'rdata' is
used uninitialized whenever '||' condition is true
[-Werror,-Wsometimes-uninitialized]

If pwrap_write returns non-zero, pwrap_read will not be called to
initialize rdata, meaning that we will use some random uninitialized
stack value in our print statement. Zero initialize rdata in case this
happens.

Link: https://github.com/ClangBuiltLinux/linux/issues/401
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/soc/mediatek/mtk-pmic-wrap.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/soc/mediatek/mtk-pmic-wrap.c b/drivers/soc/mediatek/mtk-pmic-wrap.c
index e929f5142862..36226976773f 100644
--- a/drivers/soc/mediatek/mtk-pmic-wrap.c
+++ b/drivers/soc/mediatek/mtk-pmic-wrap.c
@@ -778,7 +778,7 @@ static bool pwrap_is_pmic_cipher_ready(struct pmic_wrapper *wrp)
 static int pwrap_init_cipher(struct pmic_wrapper *wrp)
 {
 	int ret;
-	u32 rdata;
+	u32 rdata = 0;
 
 	pwrap_writel(wrp, 0x1, PWRAP_CIPHER_SWRST);
 	pwrap_writel(wrp, 0x0, PWRAP_CIPHER_SWRST);
-- 
2.20.1

[PATCH 4.9 036/117] clk: rockchip: Turn on "aclk_dmac1" for suspend on rk3288

[Greg Kroah-Hartman]

[ Upstream commit 57a20248ef3e429dc822f0774bc4e00136c46c83 ]

Experimentally it can be seen that going into deep sleep (specifically
setting PMU_CLR_DMA and PMU_CLR_BUS in RK3288_PMU_PWRMODE_CON1)
appears to fail unless "aclk_dmac1" is on.  The failure is that the
system never signals that it made it into suspend on the GLOBAL_PWROFF
pin and it just hangs.

NOTE that it's confirmed that it's the actual suspend that fails, not
one of the earlier calls to read/write registers.  Specifically if you
comment out the "PMU_GLOBAL_INT_DISABLE" setting in
rk3288_slp_mode_set() and then comment out the "cpu_do_idle()" call in
rockchip_lpmode_enter() then you can exercise the whole suspend path
without any crashing.

This is currently not a problem with suspend upstream because there is
no current way to exercise the deep suspend code.  However, anyone
trying to make it work will run into this issue.

This was not a problem on shipping rk3288-based Chromebooks because
those devices all ran on an old kernel based on 3.14.  On that kernel
"aclk_dmac1" appears to be left on all the time.

There are several ways to skin this problem.

A) We could add "aclk_dmac1" to the list of critical clocks and that
apperas to work, but presumably that wastes power.

B) We could keep a list of "struct clk" objects to enable at suspend
time in clk-rk3288.c and use the standard clock APIs.

C) We could make the rk3288-pmu driver keep a list of clocks to enable
at suspend time.  Presumably this would require a dts and bindings
change.

D) We could just whack the clock on in the existing syscore suspend
function where we whack a bunch of other clocks.  This is particularly
easy because we know for sure that the clock's only parent
("aclk_cpu") is a critical clock so we don't need to do anything more
than ungate it.

In this case I have chosen D) because it seemed like the least work,
but any of the other options would presumably also work fine.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/rockchip/clk-rk3288.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/drivers/clk/rockchip/clk-rk3288.c b/drivers/clk/rockchip/clk-rk3288.c
index 39af05a589b3..32b130c53ff9 100644
--- a/drivers/clk/rockchip/clk-rk3288.c
+++ b/drivers/clk/rockchip/clk-rk3288.c
@@ -826,6 +826,9 @@ static const int rk3288_saved_cru_reg_ids[] = {
 	RK3288_CLKSEL_CON(10),
 	RK3288_CLKSEL_CON(33),
 	RK3288_CLKSEL_CON(37),
+
+	/* We turn aclk_dmac1 on for suspend; this will restore it */
+	RK3288_CLKGATE_CON(10),
 };
 
 static u32 rk3288_saved_cru_regs[ARRAY_SIZE(rk3288_saved_cru_reg_ids)];
@@ -841,6 +844,14 @@ static int rk3288_clk_suspend(void)
 				readl_relaxed(rk3288_cru_base + reg_id);
 	}
 
+	/*
+	 * Going into deep sleep (specifically setting PMU_CLR_DMA in
+	 * RK3288_PMU_PWRMODE_CON1) appears to fail unless
+	 * "aclk_dmac1" is on.
+	 */
+	writel_relaxed(1 << (12 + 16),
+		       rk3288_cru_base + RK3288_CLKGATE_CON(10));
+
 	/*
 	 * Switch PLLs other than DPLL (for SDRAM) to slow mode to
 	 * avoid crashes on resume. The Mask ROM on the system will
-- 
2.20.1

[PATCH 4.9 037/117] ARM: dts: imx6sx: Specify IMX6SX_CLK_IPG as "ahb" clock to SDMA

[Greg Kroah-Hartman]

[ Upstream commit cc839d0f8c284fcb7591780b568f13415bbb737c ]

Since 25aaa75df1e6 SDMA driver uses clock rates of "ipg" and "ahb"
clock to determine if it needs to configure the IP block as operating
at 1:1 or 1:2 clock ratio (ACR bit in SDMAARM_CONFIG). Specifying both
clocks as IMX6SL_CLK_SDMA results in driver incorrectly thinking that
ratio is 1:1 which results in broken SDMA funtionality. Fix the code
to specify IMX6SL_CLK_AHB as "ahb" clock for SDMA, to avoid detecting
incorrect clock ratio.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Angus Ainslie (Purism) <angus@akkea.ca>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/imx6sl.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi
index 02378db3f5fc..a2c76797e871 100644
--- a/arch/arm/boot/dts/imx6sl.dtsi
+++ b/arch/arm/boot/dts/imx6sl.dtsi
@@ -704,7 +704,7 @@
 				reg = <0x020ec000 0x4000>;
 				interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6SL_CLK_SDMA>,
-					 <&clks IMX6SL_CLK_SDMA>;
+					 <&clks IMX6SL_CLK_AHB>;
 				clock-names = "ipg", "ahb";
 				#dma-cells = <3>;
 				/* imx6sl reuses imx6q sdma firmware */
-- 
2.20.1

[PATCH 4.9 038/117] ARM: dts: imx7d: Specify IMX7D_CLK_IPG as "ipg" clock to SDMA

[Greg Kroah-Hartman]

[ Upstream commit 412b032a1dc72fc9d1c258800355efa6671b6315 ]

Since 25aaa75df1e6 SDMA driver uses clock rates of "ipg" and "ahb"
clock to determine if it needs to configure the IP block as operating
at 1:1 or 1:2 clock ratio (ACR bit in SDMAARM_CONFIG). Specifying both
clocks as IMX7D_CLK_SDMA results in driver incorrectly thinking that
ratio is 1:1 which results in broken SDMA funtionality. Fix the code
to specify IMX7D_CLK_IPG as "ipg" clock for SDMA, to avoid detecting
incorrect clock ratio.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Angus Ainslie (Purism) <angus@akkea.ca>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/imx7s.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi
index 2b6cb05bc01a..edc5ddeb851a 100644
--- a/arch/arm/boot/dts/imx7s.dtsi
+++ b/arch/arm/boot/dts/imx7s.dtsi
@@ -962,8 +962,8 @@
 				compatible = "fsl,imx7d-sdma", "fsl,imx35-sdma";
 				reg = <0x30bd0000 0x10000>;
 				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_SDMA_CORE_CLK>,
-					 <&clks IMX7D_AHB_CHANNEL_ROOT_CLK>;
+				clocks = <&clks IMX7D_IPG_ROOT_CLK>,
+					 <&clks IMX7D_SDMA_CORE_CLK>;
 				clock-names = "ipg", "ahb";
 				#dma-cells = <3>;
 				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
-- 
2.20.1

[PATCH 4.9 039/117] ARM: dts: imx6ul: Specify IMX6UL_CLK_IPG as "ipg" clock to SDMA

[Greg Kroah-Hartman]

[ Upstream commit 7b3132ecefdd1fcdf6b86e62021d0e55ea8034db ]

Since 25aaa75df1e6 SDMA driver uses clock rates of "ipg" and "ahb"
clock to determine if it needs to configure the IP block as operating
at 1:1 or 1:2 clock ratio (ACR bit in SDMAARM_CONFIG). Specifying both
clocks as IMX6UL_CLK_SDMA results in driver incorrectly thinking that
ratio is 1:1 which results in broken SDMA funtionality. Fix the code
to specify IMX6UL_CLK_IPG as "ipg" clock for SDMA, to avoid detecting
incorrect clock ratio.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Angus Ainslie (Purism) <angus@akkea.ca>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/imx6ul.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi
index c5c05fdccc78..7839300fe46b 100644
--- a/arch/arm/boot/dts/imx6ul.dtsi
+++ b/arch/arm/boot/dts/imx6ul.dtsi
@@ -669,7 +669,7 @@
 					     "fsl,imx35-sdma";
 				reg = <0x020ec000 0x4000>;
 				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6UL_CLK_SDMA>,
+				clocks = <&clks IMX6UL_CLK_IPG>,
 					 <&clks IMX6UL_CLK_SDMA>;
 				clock-names = "ipg", "ahb";
 				#dma-cells = <3>;
-- 
2.20.1

[PATCH 4.9 040/117] ARM: dts: imx6sx: Specify IMX6SX_CLK_IPG as "ipg" clock to SDMA

[Greg Kroah-Hartman]

[ Upstream commit 8979117765c19edc3b01cc0ef853537bf93eea4b ]

Since 25aaa75df1e6 SDMA driver uses clock rates of "ipg" and "ahb"
clock to determine if it needs to configure the IP block as operating
at 1:1 or 1:2 clock ratio (ACR bit in SDMAARM_CONFIG). Specifying both
clocks as IMX6SX_CLK_SDMA results in driver incorrectly thinking that
ratio is 1:1 which results in broken SDMA funtionality. Fix the code
to specify IMX6SX_CLK_IPG as "ipg" clock for SDMA, to avoid detecting
incorrect clock ratio.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Angus Ainslie (Purism) <angus@akkea.ca>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/imx6sx.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi
index a885052157f0..5834194b62e1 100644
--- a/arch/arm/boot/dts/imx6sx.dtsi
+++ b/arch/arm/boot/dts/imx6sx.dtsi
@@ -751,7 +751,7 @@
 				compatible = "fsl,imx6sx-sdma", "fsl,imx6q-sdma";
 				reg = <0x020ec000 0x4000>;
 				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SX_CLK_SDMA>,
+				clocks = <&clks IMX6SX_CLK_IPG>,
 					 <&clks IMX6SX_CLK_SDMA>;
 				clock-names = "ipg", "ahb";
 				#dma-cells = <3>;
-- 
2.20.1

[PATCH 4.9 041/117] ARM: dts: imx6qdl: Specify IMX6QDL_CLK_IPG as "ipg" clock to SDMA

[Greg Kroah-Hartman]

[ Upstream commit b14c872eebc501b9640b04f4a152df51d6eaf2fc ]

Since 25aaa75df1e6 SDMA driver uses clock rates of "ipg" and "ahb"
clock to determine if it needs to configure the IP block as operating
at 1:1 or 1:2 clock ratio (ACR bit in SDMAARM_CONFIG). Specifying both
clocks as IMX6QDL_CLK_SDMA results in driver incorrectly thinking that
ratio is 1:1 which results in broken SDMA funtionality(this at least
breaks RAVE SP serdev driver on RDU2). Fix the code to specify
IMX6QDL_CLK_IPG as "ipg" clock for SDMA, to avoid detecting incorrect
clock ratio.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Cc: Angus Ainslie (Purism) <angus@akkea.ca>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Tested-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/imx6qdl.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index b13b0b2db881..8ccafdfbe87c 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -875,7 +875,7 @@
 				compatible = "fsl,imx6q-sdma", "fsl,imx35-sdma";
 				reg = <0x020ec000 0x4000>;
 				interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6QDL_CLK_SDMA>,
+				clocks = <&clks IMX6QDL_CLK_IPG>,
 					 <&clks IMX6QDL_CLK_SDMA>;
 				clock-names = "ipg", "ahb";
 				#dma-cells = <3>;
-- 
2.20.1

[PATCH 4.9 042/117] PCI: rpadlpar: Fix leaked device_node references in add/remove paths

[Greg Kroah-Hartman]

[ Upstream commit fb26228bfc4ce3951544848555c0278e2832e618 ]

The find_dlpar_node() helper returns a device node with its reference
incremented.  Both the add and remove paths use this helper for find the
appropriate node, but fail to release the reference when done.

Annotate the find_dlpar_node() helper with a comment about the incremented
reference count and call of_node_put() on the obtained device_node in the
add and remove paths.  Also, fixup a reference leak in the find_vio_slot()
helper where we fail to call of_node_put() on the vdevice node after we
iterate over its children.

Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/hotplug/rpadlpar_core.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/pci/hotplug/rpadlpar_core.c b/drivers/pci/hotplug/rpadlpar_core.c
index c614ff7c3bc3..d3562df64456 100644
--- a/drivers/pci/hotplug/rpadlpar_core.c
+++ b/drivers/pci/hotplug/rpadlpar_core.c
@@ -55,6 +55,7 @@ static struct device_node *find_vio_slot_node(char *drc_name)
 		if ((rc == 0) && (!strcmp(drc_name, name)))
 			break;
 	}
+	of_node_put(parent);
 
 	return dn;
 }
@@ -78,6 +79,7 @@ static struct device_node *find_php_slot_pci_node(char *drc_name,
 	return np;
 }
 
+/* Returns a device_node with its reference count incremented */
 static struct device_node *find_dlpar_node(char *drc_name, int *node_type)
 {
 	struct device_node *dn;
@@ -313,6 +315,7 @@ int dlpar_add_slot(char *drc_name)
 			rc = dlpar_add_phb(drc_name, dn);
 			break;
 	}
+	of_node_put(dn);
 
 	printk(KERN_INFO "%s: slot %s added\n", DLPAR_MODULE_NAME, drc_name);
 exit:
@@ -446,6 +449,7 @@ int dlpar_remove_slot(char *drc_name)
 			rc = dlpar_remove_pci_slot(drc_name, dn);
 			break;
 	}
+	of_node_put(dn);
 	vm_unmap_aliases();
 
 	printk(KERN_INFO "%s: slot %s removed\n", DLPAR_MODULE_NAME, drc_name);
-- 
2.20.1

[PATCH 4.9 043/117] platform/x86: intel_pmc_ipc: adding error handling

[Greg Kroah-Hartman]

[ Upstream commit e61985d0550df8c2078310202aaad9b41049c36c ]

If punit or telemetry device initialization fails, pmc driver should
unregister and return failure.

This change is to fix a kernel panic when removing kernel module
intel_pmc_ipc.

Fixes: 48c1917088ba ("platform:x86: Add Intel telemetry platform device")
Signed-off-by: Junxiao Chang <junxiao.chang@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/x86/intel_pmc_ipc.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/platform/x86/intel_pmc_ipc.c b/drivers/platform/x86/intel_pmc_ipc.c
index 0bf51d574fa9..f2b9dd82128f 100644
--- a/drivers/platform/x86/intel_pmc_ipc.c
+++ b/drivers/platform/x86/intel_pmc_ipc.c
@@ -620,13 +620,17 @@ static int ipc_create_pmc_devices(void)
 	if (ret) {
 		dev_err(ipcdev.dev, "Failed to add punit platform device\n");
 		platform_device_unregister(ipcdev.tco_dev);
+		return ret;
 	}
 
 	if (!ipcdev.telem_res_inval) {
 		ret = ipc_create_telemetry_device();
-		if (ret)
+		if (ret) {
 			dev_warn(ipcdev.dev,
 				"Failed to add telemetry platform device\n");
+			platform_device_unregister(ipcdev.punit_dev);
+			platform_device_unregister(ipcdev.tco_dev);
+		}
 	}
 
 	return ret;
-- 
2.20.1

[PATCH 4.9 044/117] PCI: rcar: Fix a potential NULL pointer dereference

[Greg Kroah-Hartman]

[ Upstream commit f0d14edd2ba43b995bef4dd5da5ffe0ae19321a1 ]

In case __get_free_pages() fails and returns NULL, fix the return
value to -ENOMEM and release resources to avoid dereferencing a
NULL pointer.

Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/host/pcie-rcar.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/pci/host/pcie-rcar.c b/drivers/pci/host/pcie-rcar.c
index d6196f7b1d58..77d931178178 100644
--- a/drivers/pci/host/pcie-rcar.c
+++ b/drivers/pci/host/pcie-rcar.c
@@ -886,6 +886,10 @@ static int rcar_pcie_enable_msi(struct rcar_pcie *pcie)
 
 	/* setup MSI data target */
 	msi->pages = __get_free_pages(GFP_KERNEL, 0);
+	if (!msi->pages) {
+		err = -ENOMEM;
+		goto err;
+	}
 	base = virt_to_phys((void *)msi->pages);
 
 	rcar_pci_write_reg(pcie, base | MSIFE, PCIEMSIALR);
-- 
2.20.1

[PATCH 4.9 045/117] PCI: rcar: Fix 64bit MSI message address handling

[Greg Kroah-Hartman]

[ Upstream commit 954b4b752a4c4e963b017ed8cef4c453c5ed308d ]

The MSI message address in the RC address space can be 64 bit. The
R-Car PCIe RC supports such a 64bit MSI message address as well.
The code currently uses virt_to_phys(__get_free_pages()) to obtain
a reserved page for the MSI message address, and the return value
of which can be a 64 bit physical address on 64 bit system.

However, the driver only programs PCIEMSIALR register with the bottom
32 bits of the virt_to_phys(__get_free_pages()) return value and does
not program the top 32 bits into PCIEMSIAUR, but rather programs the
PCIEMSIAUR register with 0x0. This worked fine on older 32 bit R-Car
SoCs, however may fail on new 64 bit R-Car SoCs.

Since from a PCIe controller perspective, an inbound MSI is a memory
write to a special address (in case of this controller, defined by
the value in PCIEMSIAUR:PCIEMSIALR), which triggers an interrupt, but
never hits the DRAM _and_ because allocation of an MSI by a PCIe card
driver obtains the MSI message address by reading PCIEMSIAUR:PCIEMSIALR
in rcar_msi_setup_irqs(), incorrectly programmed PCIEMSIAUR cannot
cause memory corruption or other issues.

There is however the possibility that if virt_to_phys(__get_free_pages())
returned address above the 32bit boundary _and_ PCIEMSIAUR was programmed
to 0x0 _and_ if the system had physical RAM at the address matching the
value of PCIEMSIALR, a PCIe card driver could allocate a buffer with a
physical address matching the value of PCIEMSIALR and a remote write to
such a buffer by a PCIe card would trigger a spurious MSI.

Fixes: e015f88c368d ("PCI: rcar: Add support for R-Car H3 to pcie-rcar")
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Phil Edworthy <phil.edworthy@renesas.com>
Cc: Simon Horman <horms+renesas@verge.net.au>
Cc: Wolfram Sang <wsa@the-dreams.de>
Cc: linux-renesas-soc@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/host/pcie-rcar.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/pci/host/pcie-rcar.c b/drivers/pci/host/pcie-rcar.c
index 77d931178178..7f6b454bca65 100644
--- a/drivers/pci/host/pcie-rcar.c
+++ b/drivers/pci/host/pcie-rcar.c
@@ -847,7 +847,7 @@ static int rcar_pcie_enable_msi(struct rcar_pcie *pcie)
 {
 	struct device *dev = pcie->dev;
 	struct rcar_msi *msi = &pcie->msi;
-	unsigned long base;
+	phys_addr_t base;
 	int err, i;
 
 	mutex_init(&msi->lock);
@@ -892,8 +892,8 @@ static int rcar_pcie_enable_msi(struct rcar_pcie *pcie)
 	}
 	base = virt_to_phys((void *)msi->pages);
 
-	rcar_pci_write_reg(pcie, base | MSIFE, PCIEMSIALR);
-	rcar_pci_write_reg(pcie, 0, PCIEMSIAUR);
+	rcar_pci_write_reg(pcie, lower_32_bits(base) | MSIFE, PCIEMSIALR);
+	rcar_pci_write_reg(pcie, upper_32_bits(base), PCIEMSIAUR);
 
 	/* enable all MSI interrupts */
 	rcar_pci_write_reg(pcie, 0xffffffff, PCIEMSIIER);
-- 
2.20.1

[PATCH 4.9 046/117] video: hgafb: fix potential NULL pointer dereference

[Greg Kroah-Hartman]

[ Upstream commit ec7f6aad57ad29e4e66cc2e18e1e1599ddb02542 ]

When ioremap fails, hga_vram should not be dereferenced. The fix
check the failure to avoid NULL pointer dereference.

Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Cc: Aditya Pakki <pakki001@umn.edu>
Cc: Ferenc Bakonyi <fero@drama.obuda.kando.hu>
[b.zolnierkie: minor patch summary fixup]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/video/fbdev/hgafb.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/video/fbdev/hgafb.c b/drivers/video/fbdev/hgafb.c
index 463028543173..59e1cae57948 100644
--- a/drivers/video/fbdev/hgafb.c
+++ b/drivers/video/fbdev/hgafb.c
@@ -285,6 +285,8 @@ static int hga_card_detect(void)
 	hga_vram_len  = 0x08000;
 
 	hga_vram = ioremap(0xb0000, hga_vram_len);
+	if (!hga_vram)
+		goto error;
 
 	if (request_region(0x3b0, 12, "hgafb"))
 		release_io_ports = 1;
-- 
2.20.1

[PATCH 4.9 047/117] video: imsttfb: fix potential NULL pointer dereferences

[Greg Kroah-Hartman]

[ Upstream commit 1d84353d205a953e2381044953b7fa31c8c9702d ]

In case ioremap fails, the fix releases resources and returns
-ENOMEM to avoid NULL pointer dereferences.

Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Cc: Aditya Pakki <pakki001@umn.edu>
Cc: Finn Thain <fthain@telegraphics.com.au>
Cc: Rob Herring <robh@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[b.zolnierkie: minor patch summary fixup]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/video/fbdev/imsttfb.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/video/fbdev/imsttfb.c b/drivers/video/fbdev/imsttfb.c
index 4363c64d74e8..4ef9dc94e813 100644
--- a/drivers/video/fbdev/imsttfb.c
+++ b/drivers/video/fbdev/imsttfb.c
@@ -1516,6 +1516,11 @@ static int imsttfb_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	info->fix.smem_start = addr;
 	info->screen_base = (__u8 *)ioremap(addr, par->ramdac == IBM ?
 					    0x400000 : 0x800000);
+	if (!info->screen_base) {
+		release_mem_region(addr, size);
+		framebuffer_release(info);
+		return -ENOMEM;
+	}
 	info->fix.mmio_start = addr + 0x800000;
 	par->dc_regs = ioremap(addr + 0x800000, 0x1000);
 	par->cmap_regs_phys = addr + 0x840000;
-- 
2.20.1

[PATCH 4.9 048/117] PCI: xilinx: Check for __get_free_pages() failure

[Greg Kroah-Hartman]

[ Upstream commit 699ca30162686bf305cdf94861be02eb0cf9bda2 ]

If __get_free_pages() fails, return -ENOMEM to avoid a NULL pointer
dereference.

Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/host/pcie-xilinx.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/drivers/pci/host/pcie-xilinx.c b/drivers/pci/host/pcie-xilinx.c
index 61332f4d51c3..c3964fca57b0 100644
--- a/drivers/pci/host/pcie-xilinx.c
+++ b/drivers/pci/host/pcie-xilinx.c
@@ -337,14 +337,19 @@ static const struct irq_domain_ops msi_domain_ops = {
  * xilinx_pcie_enable_msi - Enable MSI support
  * @port: PCIe port information
  */
-static void xilinx_pcie_enable_msi(struct xilinx_pcie_port *port)
+static int xilinx_pcie_enable_msi(struct xilinx_pcie_port *port)
 {
 	phys_addr_t msg_addr;
 
 	port->msi_pages = __get_free_pages(GFP_KERNEL, 0);
+	if (!port->msi_pages)
+		return -ENOMEM;
+
 	msg_addr = virt_to_phys((void *)port->msi_pages);
 	pcie_write(port, 0x0, XILINX_PCIE_REG_MSIBASE1);
 	pcie_write(port, msg_addr, XILINX_PCIE_REG_MSIBASE2);
+
+	return 0;
 }
 
 /* INTx Functions */
@@ -516,6 +521,7 @@ static int xilinx_pcie_init_irq_domain(struct xilinx_pcie_port *port)
 	struct device *dev = port->dev;
 	struct device_node *node = dev->of_node;
 	struct device_node *pcie_intc_node;
+	int ret;
 
 	/* Setup INTx */
 	pcie_intc_node = of_get_next_child(node, NULL);
@@ -544,7 +550,9 @@ static int xilinx_pcie_init_irq_domain(struct xilinx_pcie_port *port)
 			return -ENODEV;
 		}
 
-		xilinx_pcie_enable_msi(port);
+		ret = xilinx_pcie_enable_msi(port);
+		if (ret)
+			return ret;
 	}
 
 	return 0;
-- 
2.20.1

[PATCH 4.9 049/117] gpio: gpio-omap: add check for off wake capable gpios

[Greg Kroah-Hartman]

[ Upstream commit da38ef3ed10a09248e13ae16530c2c6d448dc47d ]

We are currently assuming all GPIOs are non-wakeup capable GPIOs as we
not configuring the bank->non_wakeup_gpios like we used to earlier with
platform_data.

Let's add omap_gpio_is_off_wakeup_capable() to make the handling clearer
while considering that later patches may want to configure SoC specific
bank->non_wakeup_gpios for the GPIOs in wakeup domain.

Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Keerthy <j-keerthy@ti.com>
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Cc: Tero Kristo <t-kristo@ti.com>
Reported-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpio/gpio-omap.c | 25 +++++++++++++++++--------
 1 file changed, 17 insertions(+), 8 deletions(-)

diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index 75f30a0c418a..038882183bdf 100644
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -296,6 +296,22 @@ static void omap_clear_gpio_debounce(struct gpio_bank *bank, unsigned offset)
 	}
 }
 
+/*
+ * Off mode wake-up capable GPIOs in bank(s) that are in the wakeup domain.
+ * See TRM section for GPIO for "Wake-Up Generation" for the list of GPIOs
+ * in wakeup domain. If bank->non_wakeup_gpios is not configured, assume none
+ * are capable waking up the system from off mode.
+ */
+static bool omap_gpio_is_off_wakeup_capable(struct gpio_bank *bank, u32 gpio_mask)
+{
+	u32 no_wake = bank->non_wakeup_gpios;
+
+	if (no_wake)
+		return !!(~no_wake & gpio_mask);
+
+	return false;
+}
+
 static inline void omap_set_gpio_trigger(struct gpio_bank *bank, int gpio,
 						unsigned trigger)
 {
@@ -327,13 +343,7 @@ static inline void omap_set_gpio_trigger(struct gpio_bank *bank, int gpio,
 	}
 
 	/* This part needs to be executed always for OMAP{34xx, 44xx} */
-	if (!bank->regs->irqctrl) {
-		/* On omap24xx proceed only when valid GPIO bit is set */
-		if (bank->non_wakeup_gpios) {
-			if (!(bank->non_wakeup_gpios & gpio_bit))
-				goto exit;
-		}
-
+	if (!bank->regs->irqctrl && !omap_gpio_is_off_wakeup_capable(bank, gpio)) {
 		/*
 		 * Log the edge gpio and manually trigger the IRQ
 		 * after resume if the input level changes
@@ -346,7 +356,6 @@ static inline void omap_set_gpio_trigger(struct gpio_bank *bank, int gpio,
 			bank->enabled_non_wakeup_gpios &= ~gpio_bit;
 	}
 
-exit:
 	bank->level_mask =
 		readl_relaxed(bank->base + bank->regs->leveldetect0) |
 		readl_relaxed(bank->base + bank->regs->leveldetect1);
-- 
2.20.1

[PATCH 4.9 050/117] dmaengine: idma64: Use actual device for DMA transfers

[Greg Kroah-Hartman]

[ Upstream commit 5ba846b1ee0792f5a596b9b0b86d6e8cdebfab06 ]

Intel IOMMU, when enabled, tries to find the domain of the device,
assuming it's a PCI one, during DMA operations, such as mapping or
unmapping. Since we are splitting the actual PCI device to couple of
children via MFD framework (see drivers/mfd/intel-lpss.c for details),
the DMA device appears to be a platform one, and thus not an actual one
that performs DMA. In a such situation IOMMU can't find or allocate
a proper domain for its operations. As a result, all DMA operations are
failed.

In order to fix this, supply parent of the platform device
to the DMA engine framework and fix filter functions accordingly.

We may rely on the fact that parent is a real PCI device, because no
other configuration is present in the wild.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [for tty parts]
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/idma64.c              | 6 ++++--
 drivers/dma/idma64.h              | 2 ++
 drivers/spi/spi-pxa2xx.c          | 7 +------
 drivers/tty/serial/8250/8250_dw.c | 4 ++--
 4 files changed, 9 insertions(+), 10 deletions(-)

diff --git a/drivers/dma/idma64.c b/drivers/dma/idma64.c
index 1953e57505f4..f17a4c7a1781 100644
--- a/drivers/dma/idma64.c
+++ b/drivers/dma/idma64.c
@@ -589,7 +589,7 @@ static int idma64_probe(struct idma64_chip *chip)
 	idma64->dma.directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV);
 	idma64->dma.residue_granularity = DMA_RESIDUE_GRANULARITY_BURST;
 
-	idma64->dma.dev = chip->dev;
+	idma64->dma.dev = chip->sysdev;
 
 	dma_set_max_seg_size(idma64->dma.dev, IDMA64C_CTLH_BLOCK_TS_MASK);
 
@@ -629,6 +629,7 @@ static int idma64_platform_probe(struct platform_device *pdev)
 {
 	struct idma64_chip *chip;
 	struct device *dev = &pdev->dev;
+	struct device *sysdev = dev->parent;
 	struct resource *mem;
 	int ret;
 
@@ -645,11 +646,12 @@ static int idma64_platform_probe(struct platform_device *pdev)
 	if (IS_ERR(chip->regs))
 		return PTR_ERR(chip->regs);
 
-	ret = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
+	ret = dma_coerce_mask_and_coherent(sysdev, DMA_BIT_MASK(64));
 	if (ret)
 		return ret;
 
 	chip->dev = dev;
+	chip->sysdev = sysdev;
 
 	ret = idma64_probe(chip);
 	if (ret)
diff --git a/drivers/dma/idma64.h b/drivers/dma/idma64.h
index 6b816878e5e7..baa32e1425de 100644
--- a/drivers/dma/idma64.h
+++ b/drivers/dma/idma64.h
@@ -216,12 +216,14 @@ static inline void idma64_writel(struct idma64 *idma64, int offset, u32 value)
 /**
  * struct idma64_chip - representation of iDMA 64-bit controller hardware
  * @dev:		struct device of the DMA controller
+ * @sysdev:		struct device of the physical device that does DMA
  * @irq:		irq line
  * @regs:		memory mapped I/O space
  * @idma64:		struct idma64 that is filed by idma64_probe()
  */
 struct idma64_chip {
 	struct device	*dev;
+	struct device	*sysdev;
 	int		irq;
 	void __iomem	*regs;
 	struct idma64	*idma64;
diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c
index 8b618f0fa459..6dd195b94c57 100644
--- a/drivers/spi/spi-pxa2xx.c
+++ b/drivers/spi/spi-pxa2xx.c
@@ -1475,12 +1475,7 @@ static const struct pci_device_id pxa2xx_spi_pci_compound_match[] = {
 
 static bool pxa2xx_spi_idma_filter(struct dma_chan *chan, void *param)
 {
-	struct device *dev = param;
-
-	if (dev != chan->device->dev->parent)
-		return false;
-
-	return true;
+	return param == chan->device->dev;
 }
 
 static struct pxa2xx_spi_master *
diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
index 3177264a1166..22d65a33059e 100644
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -269,7 +269,7 @@ static bool dw8250_fallback_dma_filter(struct dma_chan *chan, void *param)
 
 static bool dw8250_idma_filter(struct dma_chan *chan, void *param)
 {
-	return param == chan->device->dev->parent;
+	return param == chan->device->dev;
 }
 
 static void dw8250_quirks(struct uart_port *p, struct dw8250_data *data)
@@ -311,7 +311,7 @@ static void dw8250_quirks(struct uart_port *p, struct dw8250_data *data)
 		p->set_termios = dw8250_set_termios;
 	}
 
-	/* Platforms with iDMA */
+	/* Platforms with iDMA 64-bit */
 	if (platform_get_resource_byname(to_platform_device(p->dev),
 					 IORESOURCE_MEM, "lpss_priv")) {
 		p->set_termios = dw8250_set_termios;
-- 
2.20.1

[PATCH 4.9 051/117] pwm: tiehrpwm: Update shadow register for disabling PWMs

[Greg Kroah-Hartman]

[ Upstream commit b00ef53053191d3025c15e8041699f8c9d132daf ]

It must be made sure that immediate mode is not already set, when
modifying shadow register value in ehrpwm_pwm_disable(). Otherwise
modifications to the action-qualifier continuous S/W force
register(AQSFRC) will be done in the active register.
This may happen when both channels are being disabled. In this case,
only the first channel state will be recorded as disabled in the shadow
register. Later, when enabling the first channel again, the second
channel would be enabled as well. Setting RLDCSF to zero, first, ensures
that the shadow register is updated as desired.

Fixes: 38dabd91ff0b ("pwm: tiehrpwm: Fix disabling of output of PWMs")
Signed-off-by: Christoph Vogtländer <c.vogtlaender@sigma-surface-science.com>
[vigneshr@ti.com: Improve commit message]
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pwm/pwm-tiehrpwm.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/pwm/pwm-tiehrpwm.c b/drivers/pwm/pwm-tiehrpwm.c
index c0e06f0c19d1..9a232ebbbf96 100644
--- a/drivers/pwm/pwm-tiehrpwm.c
+++ b/drivers/pwm/pwm-tiehrpwm.c
@@ -383,6 +383,8 @@ static void ehrpwm_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
 	}
 
 	/* Update shadow register first before modifying active register */
+	ehrpwm_modify(pc->mmio_base, AQSFRC, AQSFRC_RLDCSF_MASK,
+		      AQSFRC_RLDCSF_ZRO);
 	ehrpwm_modify(pc->mmio_base, AQCSFRC, aqcsfrc_mask, aqcsfrc_val);
 	/*
 	 * Changes to immediate action on Action Qualifier. This puts
-- 
2.20.1

[PATCH 4.9 052/117] ARM: dts: exynos: Always enable necessary APIO_1V8 and ABB_1V8 regulators on Arndale Octa

[Greg Kroah-Hartman]

[ Upstream commit 5ab99cf7d5e96e3b727c30e7a8524c976bd3723d ]

The PVDD_APIO_1V8 (LDO2) and PVDD_ABB_1V8 (LDO8) regulators were turned
off by Linux kernel as unused.  However they supply critical parts of
SoC so they should be always on:

1. PVDD_APIO_1V8 supplies SYS pins (gpx[0-3], PSHOLD), HDMI level shift,
   RTC, VDD1_12 (DRAM internal 1.8 V logic), pull-up for PMIC interrupt
   lines, TTL/UARTR level shift, reset pins and SW-TACT1 button.
   It also supplies unused blocks like VDDQ_SRAM (for SROM controller) and
   VDDQ_GPIO (gpm7, gpy7).
   The LDO2 cannot be turned off (S2MPS11 keeps it on anyway) so
   marking it "always-on" only reflects its real status.

2. PVDD_ABB_1V8 supplies Adaptive Body Bias Generator for ARM cores,
   memory and Mali (G3D).

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/exynos5420-arndale-octa.dts | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
index 9cc83c51c925..e664c33c3c64 100644
--- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts
+++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
@@ -110,6 +110,7 @@
 				regulator-name = "PVDD_APIO_1V8";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
 			};
 
 			ldo3_reg: LDO3 {
@@ -148,6 +149,7 @@
 				regulator-name = "PVDD_ABB_1V8";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
 			};
 
 			ldo9_reg: LDO9 {
-- 
2.20.1

[PATCH 4.9 053/117] pwm: Fix deadlock warning when removing PWM device

[Greg Kroah-Hartman]

[ Upstream commit 347ab9480313737c0f1aaa08e8f2e1a791235535 ]

This patch fixes deadlock warning if removing PWM device
when CONFIG_PROVE_LOCKING is enabled.

This issue can be reproceduced by the following steps on
the R-Car H3 Salvator-X board if the backlight is disabled:

 # cd /sys/class/pwm/pwmchip0
 # echo 0 > export
 # ls
 device  export  npwm  power  pwm0  subsystem  uevent  unexport
 # cd device/driver
 # ls
 bind  e6e31000.pwm  uevent  unbind
 # echo e6e31000.pwm > unbind

[   87.659974] ======================================================
[   87.666149] WARNING: possible circular locking dependency detected
[   87.672327] 5.0.0 #7 Not tainted
[   87.675549] ------------------------------------------------------
[   87.681723] bash/2986 is trying to acquire lock:
[   87.686337] 000000005ea0e178 (kn->count#58){++++}, at: kernfs_remove_by_name_ns+0x50/0xa0
[   87.694528]
[   87.694528] but task is already holding lock:
[   87.700353] 000000006313b17c (pwm_lock){+.+.}, at: pwmchip_remove+0x28/0x13c
[   87.707405]
[   87.707405] which lock already depends on the new lock.
[   87.707405]
[   87.715574]
[   87.715574] the existing dependency chain (in reverse order) is:
[   87.723048]
[   87.723048] -> #1 (pwm_lock){+.+.}:
[   87.728017]        __mutex_lock+0x70/0x7e4
[   87.732108]        mutex_lock_nested+0x1c/0x24
[   87.736547]        pwm_request_from_chip.part.6+0x34/0x74
[   87.741940]        pwm_request_from_chip+0x20/0x40
[   87.746725]        export_store+0x6c/0x1f4
[   87.750820]        dev_attr_store+0x18/0x28
[   87.754998]        sysfs_kf_write+0x54/0x64
[   87.759175]        kernfs_fop_write+0xe4/0x1e8
[   87.763615]        __vfs_write+0x40/0x184
[   87.767619]        vfs_write+0xa8/0x19c
[   87.771448]        ksys_write+0x58/0xbc
[   87.775278]        __arm64_sys_write+0x18/0x20
[   87.779721]        el0_svc_common+0xd0/0x124
[   87.783986]        el0_svc_compat_handler+0x1c/0x24
[   87.788858]        el0_svc_compat+0x8/0x18
[   87.792947]
[   87.792947] -> #0 (kn->count#58){++++}:
[   87.798260]        lock_acquire+0xc4/0x22c
[   87.802353]        __kernfs_remove+0x258/0x2c4
[   87.806790]        kernfs_remove_by_name_ns+0x50/0xa0
[   87.811836]        remove_files.isra.1+0x38/0x78
[   87.816447]        sysfs_remove_group+0x48/0x98
[   87.820971]        sysfs_remove_groups+0x34/0x4c
[   87.825583]        device_remove_attrs+0x6c/0x7c
[   87.830197]        device_del+0x11c/0x33c
[   87.834201]        device_unregister+0x14/0x2c
[   87.838638]        pwmchip_sysfs_unexport+0x40/0x4c
[   87.843509]        pwmchip_remove+0xf4/0x13c
[   87.847773]        rcar_pwm_remove+0x28/0x34
[   87.852039]        platform_drv_remove+0x24/0x64
[   87.856651]        device_release_driver_internal+0x18c/0x21c
[   87.862391]        device_release_driver+0x14/0x1c
[   87.867175]        unbind_store+0xe0/0x124
[   87.871265]        drv_attr_store+0x20/0x30
[   87.875442]        sysfs_kf_write+0x54/0x64
[   87.879618]        kernfs_fop_write+0xe4/0x1e8
[   87.884055]        __vfs_write+0x40/0x184
[   87.888057]        vfs_write+0xa8/0x19c
[   87.891887]        ksys_write+0x58/0xbc
[   87.895716]        __arm64_sys_write+0x18/0x20
[   87.900154]        el0_svc_common+0xd0/0x124
[   87.904417]        el0_svc_compat_handler+0x1c/0x24
[   87.909289]        el0_svc_compat+0x8/0x18
[   87.913378]
[   87.913378] other info that might help us debug this:
[   87.913378]
[   87.921374]  Possible unsafe locking scenario:
[   87.921374]
[   87.927286]        CPU0                    CPU1
[   87.931808]        ----                    ----
[   87.936331]   lock(pwm_lock);
[   87.939293]                                lock(kn->count#58);
[   87.945120]                                lock(pwm_lock);
[   87.950599]   lock(kn->count#58);
[   87.953908]
[   87.953908]  *** DEADLOCK ***
[   87.953908]
[   87.959821] 4 locks held by bash/2986:
[   87.963563]  #0: 00000000ace7bc30 (sb_writers#6){.+.+}, at: vfs_write+0x188/0x19c
[   87.971044]  #1: 00000000287991b2 (&of->mutex){+.+.}, at: kernfs_fop_write+0xb4/0x1e8
[   87.978872]  #2: 00000000f739d016 (&dev->mutex){....}, at: device_release_driver_internal+0x40/0x21c
[   87.988001]  #3: 000000006313b17c (pwm_lock){+.+.}, at: pwmchip_remove+0x28/0x13c
[   87.995481]
[   87.995481] stack backtrace:
[   87.999836] CPU: 0 PID: 2986 Comm: bash Not tainted 5.0.0 #7
[   88.005489] Hardware name: Renesas Salvator-X board based on r8a7795 ES1.x (DT)
[   88.012791] Call trace:
[   88.015235]  dump_backtrace+0x0/0x190
[   88.018891]  show_stack+0x14/0x1c
[   88.022204]  dump_stack+0xb0/0xec
[   88.025514]  print_circular_bug.isra.32+0x1d0/0x2e0
[   88.030385]  __lock_acquire+0x1318/0x1864
[   88.034388]  lock_acquire+0xc4/0x22c
[   88.037958]  __kernfs_remove+0x258/0x2c4
[   88.041874]  kernfs_remove_by_name_ns+0x50/0xa0
[   88.046398]  remove_files.isra.1+0x38/0x78
[   88.050487]  sysfs_remove_group+0x48/0x98
[   88.054490]  sysfs_remove_groups+0x34/0x4c
[   88.058580]  device_remove_attrs+0x6c/0x7c
[   88.062671]  device_del+0x11c/0x33c
[   88.066154]  device_unregister+0x14/0x2c
[   88.070070]  pwmchip_sysfs_unexport+0x40/0x4c
[   88.074421]  pwmchip_remove+0xf4/0x13c
[   88.078163]  rcar_pwm_remove+0x28/0x34
[   88.081906]  platform_drv_remove+0x24/0x64
[   88.085996]  device_release_driver_internal+0x18c/0x21c
[   88.091215]  device_release_driver+0x14/0x1c
[   88.095478]  unbind_store+0xe0/0x124
[   88.099048]  drv_attr_store+0x20/0x30
[   88.102704]  sysfs_kf_write+0x54/0x64
[   88.106359]  kernfs_fop_write+0xe4/0x1e8
[   88.110275]  __vfs_write+0x40/0x184
[   88.113757]  vfs_write+0xa8/0x19c
[   88.117065]  ksys_write+0x58/0xbc
[   88.120374]  __arm64_sys_write+0x18/0x20
[   88.124291]  el0_svc_common+0xd0/0x124
[   88.128034]  el0_svc_compat_handler+0x1c/0x24
[   88.132384]  el0_svc_compat+0x8/0x18

The sysfs unexport in pwmchip_remove() is completely asymmetric
to what we do in pwmchip_add_with_polarity() and commit 0733424c9ba9
("pwm: Unexport children before chip removal") is a strong indication
that this was wrong to begin with. We should just move
pwmchip_sysfs_unexport() where it belongs, which is right after
pwmchip_sysfs_unexport_children(). In that case, we do not need
separate functions anymore either.

We also really want to remove sysfs irrespective of whether or not
the chip will be removed as a result of pwmchip_remove(). We can only
assume that the driver will be gone after that, so we shouldn't leave
any dangling sysfs files around.

This warning disappears if we move pwmchip_sysfs_unexport() to
the top of pwmchip_remove(), pwmchip_sysfs_unexport_children().
That way it is also outside of the pwm_lock section, which indeed
doesn't seem to be needed.

Moving the pwmchip_sysfs_export() call outside of that section also
seems fine and it'd be perfectly symmetric with pwmchip_remove() again.

So, this patch fixes them.

Signed-off-by: Phong Hoang <phong.hoang.wz@renesas.com>
[shimoda: revise the commit log and code]
Fixes: 76abbdde2d95 ("pwm: Add sysfs interface")
Fixes: 0733424c9ba9 ("pwm: Unexport children before chip removal")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Hoan Nguyen An <na-hoan@jinso.co.jp>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pwm/core.c  | 10 +++++-----
 drivers/pwm/sysfs.c | 14 +-------------
 include/linux/pwm.h |  5 -----
 3 files changed, 6 insertions(+), 23 deletions(-)

diff --git a/drivers/pwm/core.c b/drivers/pwm/core.c
index 172ef8245811..a19246455c13 100644
--- a/drivers/pwm/core.c
+++ b/drivers/pwm/core.c
@@ -302,10 +302,12 @@ int pwmchip_add_with_polarity(struct pwm_chip *chip,
 	if (IS_ENABLED(CONFIG_OF))
 		of_pwmchip_add(chip);
 
-	pwmchip_sysfs_export(chip);
-
 out:
 	mutex_unlock(&pwm_lock);
+
+	if (!ret)
+		pwmchip_sysfs_export(chip);
+
 	return ret;
 }
 EXPORT_SYMBOL_GPL(pwmchip_add_with_polarity);
@@ -339,7 +341,7 @@ int pwmchip_remove(struct pwm_chip *chip)
 	unsigned int i;
 	int ret = 0;
 
-	pwmchip_sysfs_unexport_children(chip);
+	pwmchip_sysfs_unexport(chip);
 
 	mutex_lock(&pwm_lock);
 
@@ -359,8 +361,6 @@ int pwmchip_remove(struct pwm_chip *chip)
 
 	free_pwms(chip);
 
-	pwmchip_sysfs_unexport(chip);
-
 out:
 	mutex_unlock(&pwm_lock);
 	return ret;
diff --git a/drivers/pwm/sysfs.c b/drivers/pwm/sysfs.c
index a813239300c3..0850b11dfd83 100644
--- a/drivers/pwm/sysfs.c
+++ b/drivers/pwm/sysfs.c
@@ -397,19 +397,6 @@ void pwmchip_sysfs_export(struct pwm_chip *chip)
 }
 
 void pwmchip_sysfs_unexport(struct pwm_chip *chip)
-{
-	struct device *parent;
-
-	parent = class_find_device(&pwm_class, NULL, chip,
-				   pwmchip_sysfs_match);
-	if (parent) {
-		/* for class_find_device() */
-		put_device(parent);
-		device_unregister(parent);
-	}
-}
-
-void pwmchip_sysfs_unexport_children(struct pwm_chip *chip)
 {
 	struct device *parent;
 	unsigned int i;
@@ -427,6 +414,7 @@ void pwmchip_sysfs_unexport_children(struct pwm_chip *chip)
 	}
 
 	put_device(parent);
+	device_unregister(parent);
 }
 
 static int __init pwm_sysfs_init(void)
diff --git a/include/linux/pwm.h b/include/linux/pwm.h
index 2c6c5114c089..f1bbae014889 100644
--- a/include/linux/pwm.h
+++ b/include/linux/pwm.h
@@ -641,7 +641,6 @@ static inline void pwm_remove_table(struct pwm_lookup *table, size_t num)
 #ifdef CONFIG_PWM_SYSFS
 void pwmchip_sysfs_export(struct pwm_chip *chip);
 void pwmchip_sysfs_unexport(struct pwm_chip *chip);
-void pwmchip_sysfs_unexport_children(struct pwm_chip *chip);
 #else
 static inline void pwmchip_sysfs_export(struct pwm_chip *chip)
 {
@@ -650,10 +649,6 @@ static inline void pwmchip_sysfs_export(struct pwm_chip *chip)
 static inline void pwmchip_sysfs_unexport(struct pwm_chip *chip)
 {
 }
-
-static inline void pwmchip_sysfs_unexport_children(struct pwm_chip *chip)
-{
-}
 #endif /* CONFIG_PWM_SYSFS */
 
 #endif /* __LINUX_PWM_H */
-- 
2.20.1

[PATCH 4.9 054/117] ARM: exynos: Fix undefined instruction during Exynos5422 resume

[Greg Kroah-Hartman]

[ Upstream commit 4d8e3e951a856777720272ce27f2c738a3eeef8c ]

During early system resume on Exynos5422 with performance counters enabled
the following kernel oops happens:

    Internal error: Oops - undefined instruction: 0 [#1] PREEMPT SMP ARM
    Modules linked in:
    CPU: 0 PID: 1433 Comm: bash Tainted: G        W         5.0.0-rc5-next-20190208-00023-gd5fb5a8a13e6-dirty #5480
    Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
    ...
    Flags: nZCv  IRQs off  FIQs off  Mode SVC_32  ISA ARM  Segment none
    Control: 10c5387d  Table: 4451006a  DAC: 00000051
    Process bash (pid: 1433, stack limit = 0xb7e0e22f)
    ...
    (reset_ctrl_regs) from [<c0112ad0>] (dbg_cpu_pm_notify+0x1c/0x24)
    (dbg_cpu_pm_notify) from [<c014c840>] (notifier_call_chain+0x44/0x84)
    (notifier_call_chain) from [<c014cbc0>] (__atomic_notifier_call_chain+0x7c/0x128)
    (__atomic_notifier_call_chain) from [<c01ffaac>] (cpu_pm_notify+0x30/0x54)
    (cpu_pm_notify) from [<c055116c>] (syscore_resume+0x98/0x3f4)
    (syscore_resume) from [<c0189350>] (suspend_devices_and_enter+0x97c/0xe74)
    (suspend_devices_and_enter) from [<c0189fb8>] (pm_suspend+0x770/0xc04)
    (pm_suspend) from [<c0187740>] (state_store+0x6c/0xcc)
    (state_store) from [<c09fa698>] (kobj_attr_store+0x14/0x20)
    (kobj_attr_store) from [<c030159c>] (sysfs_kf_write+0x4c/0x50)
    (sysfs_kf_write) from [<c0300620>] (kernfs_fop_write+0xfc/0x1e0)
    (kernfs_fop_write) from [<c0282be8>] (__vfs_write+0x2c/0x160)
    (__vfs_write) from [<c0282ea4>] (vfs_write+0xa4/0x16c)
    (vfs_write) from [<c0283080>] (ksys_write+0x40/0x8c)
    (ksys_write) from [<c0101000>] (ret_fast_syscall+0x0/0x28)

Undefined instruction is triggered during CP14 reset, because bits: #16
(Secure privileged invasive debug disabled) and #17 (Secure privileged
noninvasive debug disable) are set in DSCR. Those bits depend on SPNIDEN
and SPIDEN lines, which are provided by Secure JTAG hardware block. That
block in turn is powered from cluster 0 (big/Eagle), but the Exynos5422
boots on cluster 1 (LITTLE/KFC).

To fix this issue it is enough to turn on the power on the cluster 0 for
a while. This lets the Secure JTAG block to propagate the needed signals
to LITTLE/KFC cores and change their DSCR.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/mach-exynos/suspend.c | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/arch/arm/mach-exynos/suspend.c b/arch/arm/mach-exynos/suspend.c
index 81c935ce089b..b406c12077b9 100644
--- a/arch/arm/mach-exynos/suspend.c
+++ b/arch/arm/mach-exynos/suspend.c
@@ -500,8 +500,27 @@ early_wakeup:
 
 static void exynos5420_prepare_pm_resume(void)
 {
+	unsigned int mpidr, cluster;
+
+	mpidr = read_cpuid_mpidr();
+	cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
+
 	if (IS_ENABLED(CONFIG_EXYNOS5420_MCPM))
 		WARN_ON(mcpm_cpu_powered_up());
+
+	if (IS_ENABLED(CONFIG_HW_PERF_EVENTS) && cluster != 0) {
+		/*
+		 * When system is resumed on the LITTLE/KFC core (cluster 1),
+		 * the DSCR is not properly updated until the power is turned
+		 * on also for the cluster 0. Enable it for a while to
+		 * propagate the SPNIDEN and SPIDEN signals from Secure JTAG
+		 * block and avoid undefined instruction issue on CP14 reset.
+		 */
+		pmu_raw_writel(S5P_CORE_LOCAL_PWR_EN,
+				EXYNOS_COMMON_CONFIGURATION(0));
+		pmu_raw_writel(0,
+				EXYNOS_COMMON_CONFIGURATION(0));
+	}
 }
 
 static void exynos5420_pm_resume(void)
-- 
2.20.1

[PATCH 4.9 055/117] Revert "Bluetooth: Align minimum encryption key size for LE and BR/EDR connections"

[Greg Kroah-Hartman]

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This reverts commit 745f5c5f2ac14ac1cbb7fe3cbdc893c9d1af1356 which is
commit d5bb334a8e171b262e48f378bd2096c0ea458265 upstream.

Lots of people have reported issues with this patch, and as there does
not seem to be a fix going into Linus's kernel tree any time soon,
revert the commit in the stable trees so as to get people's machines
working properly again.

Reported-by: Vasily Khoruzhick <anarsoul@gmail.com>
Reported-by: Hans de Goede <hdegoede@redhat.com>
Cc: Jeremy Cline <jeremy@jcline.org>
Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/net/bluetooth/hci_core.h |    3 ---
 net/bluetooth/hci_conn.c         |    8 --------
 2 files changed, 11 deletions(-)

--- a/include/net/bluetooth/hci_core.h
+++ b/include/net/bluetooth/hci_core.h
@@ -176,9 +176,6 @@ struct adv_info {
 
 #define HCI_MAX_SHORT_NAME_LENGTH	10
 
-/* Min encryption key size to match with SMP */
-#define HCI_MIN_ENC_KEY_SIZE		7
-
 /* Default LE RPA expiry time, 15 minutes */
 #define HCI_DEFAULT_RPA_TIMEOUT		(15 * 60)
 
--- a/net/bluetooth/hci_conn.c
+++ b/net/bluetooth/hci_conn.c
@@ -1165,14 +1165,6 @@ int hci_conn_check_link_mode(struct hci_
 	    !test_bit(HCI_CONN_ENCRYPT, &conn->flags))
 		return 0;
 
-	/* The minimum encryption key size needs to be enforced by the
-	 * host stack before establishing any L2CAP connections. The
-	 * specification in theory allows a minimum of 1, but to align
-	 * BR/EDR and LE transports, a minimum of 7 is chosen.
-	 */
-	if (conn->enc_key_size < HCI_MIN_ENC_KEY_SIZE)
-		return 0;
-
 	return 1;
 }
 

[PATCH 4.9 056/117] ALSA: seq: Cover unsubscribe_port() in list_mutex

[Greg Kroah-Hartman]

From: Takashi Iwai <tiwai@suse.de>

commit 7c32ae35fbf9cffb7aa3736f44dec10c944ca18e upstream.

The call of unsubscribe_port() which manages the group count and
module refcount from delete_and_unsubscribe_port() looks racy; it's
not covered by the group list lock, and it's likely a cause of the
reported unbalance at port deletion.  Let's move the call inside the
group list_mutex to plug the hole.

Reported-by: syzbot+e4c8abb920efa77bace9@syzkaller.appspotmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/core/seq/seq_ports.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/sound/core/seq/seq_ports.c
+++ b/sound/core/seq/seq_ports.c
@@ -550,10 +550,10 @@ static void delete_and_unsubscribe_port(
 		list_del_init(list);
 	grp->exclusive = 0;
 	write_unlock_irq(&grp->list_lock);
-	up_write(&grp->list_mutex);
 
 	if (!empty)
 		unsubscribe_port(client, port, grp, &subs->info, ack);
+	up_write(&grp->list_mutex);
 }
 
 /* connect two ports */

[PATCH 4.9 057/117] ALSA: oxfw: allow PCM capture for Stanton SCS.1m

[Greg Kroah-Hartman]

From: Takashi Sakamoto <o-takashi@sakamocchi.jp>

commit d8fa87c368f5b4096c4746894fdcc195da285df1 upstream.

Stanton SCS.1m can transfer isochronous packet with Multi Bit Linear
Audio data channels, therefore it allows software to capture PCM
substream. However, ALSA oxfw driver doesn't.

This commit changes the driver to add one PCM substream for capture
direction.

Fixes: de5126cc3c0b ("ALSA: oxfw: add stream format quirk for SCS.1 models")
Cc: <stable@vger.kernel.org> # v4.5+
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/firewire/oxfw/oxfw.c |    3 ---
 1 file changed, 3 deletions(-)

--- a/sound/firewire/oxfw/oxfw.c
+++ b/sound/firewire/oxfw/oxfw.c
@@ -175,9 +175,6 @@ static int detect_quirks(struct snd_oxfw
 		oxfw->midi_input_ports = 0;
 		oxfw->midi_output_ports = 0;
 
-		/* Output stream exists but no data channels are useful. */
-		oxfw->has_output = false;
-
 		return snd_oxfw_scs1x_add(oxfw);
 	}
 

[PATCH 4.9 058/117] libata: Extend quirks for the ST1000LM024 drives with NOLPM quirk

[Greg Kroah-Hartman]

From: Hans de Goede <hdegoede@redhat.com>

commit 31f6264e225fb92cf6f4b63031424f20797c297d upstream.

We've received a bugreport that using LPM with ST1000LM024 drives leads
to system lockups. So it seems that these models are buggy in more then
1 way. Add NOLPM quirk to the existing quirks entry for BROKEN_FPDMA_AA.

BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1571330
Cc: stable@vger.kernel.org
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/ata/libata-core.c |    9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -4355,9 +4355,12 @@ static const struct ata_blacklist_entry
 	{ "ST3320[68]13AS",	"SD1[5-9]",	ATA_HORKAGE_NONCQ |
 						ATA_HORKAGE_FIRMWARE_WARN },
 
-	/* drives which fail FPDMA_AA activation (some may freeze afterwards) */
-	{ "ST1000LM024 HN-M101MBB", "2AR10001",	ATA_HORKAGE_BROKEN_FPDMA_AA },
-	{ "ST1000LM024 HN-M101MBB", "2BA30001",	ATA_HORKAGE_BROKEN_FPDMA_AA },
+	/* drives which fail FPDMA_AA activation (some may freeze afterwards)
+	   the ST disks also have LPM issues */
+	{ "ST1000LM024 HN-M101MBB", "2AR10001",	ATA_HORKAGE_BROKEN_FPDMA_AA |
+						ATA_HORKAGE_NOLPM, },
+	{ "ST1000LM024 HN-M101MBB", "2BA30001",	ATA_HORKAGE_BROKEN_FPDMA_AA |
+						ATA_HORKAGE_NOLPM, },
 	{ "VB0250EAVER",	"HPG7",		ATA_HORKAGE_BROKEN_FPDMA_AA },
 
 	/* Blacklist entries taken from Silicon Image 3124/3132

[PATCH 4.9 059/117] mm/list_lru.c: fix memory leak in __memcg_init_list_lru_node

[Greg Kroah-Hartman]

From: Shakeel Butt <shakeelb@google.com>

commit 3510955b327176fd4cbab5baa75b449f077722a2 upstream.

Syzbot reported following memory leak:

ffffffffda RBX: 0000000000000003 RCX: 0000000000441f79
BUG: memory leak
unreferenced object 0xffff888114f26040 (size 32):
  comm "syz-executor626", pid 7056, jiffies 4294948701 (age 39.410s)
  hex dump (first 32 bytes):
    40 60 f2 14 81 88 ff ff 40 60 f2 14 81 88 ff ff  @`......@`......
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
     slab_post_alloc_hook mm/slab.h:439 [inline]
     slab_alloc mm/slab.c:3326 [inline]
     kmem_cache_alloc_trace+0x13d/0x280 mm/slab.c:3553
     kmalloc include/linux/slab.h:547 [inline]
     __memcg_init_list_lru_node+0x58/0xf0 mm/list_lru.c:352
     memcg_init_list_lru_node mm/list_lru.c:375 [inline]
     memcg_init_list_lru mm/list_lru.c:459 [inline]
     __list_lru_init+0x193/0x2a0 mm/list_lru.c:626
     alloc_super+0x2e0/0x310 fs/super.c:269
     sget_userns+0x94/0x2a0 fs/super.c:609
     sget+0x8d/0xb0 fs/super.c:660
     mount_nodev+0x31/0xb0 fs/super.c:1387
     fuse_mount+0x2d/0x40 fs/fuse/inode.c:1236
     legacy_get_tree+0x27/0x80 fs/fs_context.c:661
     vfs_get_tree+0x2e/0x120 fs/super.c:1476
     do_new_mount fs/namespace.c:2790 [inline]
     do_mount+0x932/0xc50 fs/namespace.c:3110
     ksys_mount+0xab/0x120 fs/namespace.c:3319
     __do_sys_mount fs/namespace.c:3333 [inline]
     __se_sys_mount fs/namespace.c:3330 [inline]
     __x64_sys_mount+0x26/0x30 fs/namespace.c:3330
     do_syscall_64+0x76/0x1a0 arch/x86/entry/common.c:301
     entry_SYSCALL_64_after_hwframe+0x44/0xa9

This is a simple off by one bug on the error path.

Link: http://lkml.kernel.org/r/20190528043202.99980-1-shakeelb@google.com
Fixes: 60d3fd32a7a9 ("list_lru: introduce per-memcg lists")
Reported-by: syzbot+f90a420dfe2b1b03cb2c@syzkaller.appspotmail.com
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: <stable@vger.kernel.org>	[4.0+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 mm/list_lru.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/mm/list_lru.c
+++ b/mm/list_lru.c
@@ -313,7 +313,7 @@ static int __memcg_init_list_lru_node(st
 	}
 	return 0;
 fail:
-	__memcg_destroy_list_lru_node(memcg_lrus, begin, i - 1);
+	__memcg_destroy_list_lru_node(memcg_lrus, begin, i);
 	return -ENOMEM;
 }
 

[PATCH 4.9 060/117] fs/ocfs2: fix race in ocfs2_dentry_attach_lock()

[Greg Kroah-Hartman]

From: Wengang Wang <wen.gang.wang@oracle.com>

commit be99ca2716972a712cde46092c54dee5e6192bf8 upstream.

ocfs2_dentry_attach_lock() can be executed in parallel threads against the
same dentry.  Make that race safe.  The race is like this:

            thread A                               thread B

(A1) enter ocfs2_dentry_attach_lock,
seeing dentry->d_fsdata is NULL,
and no alias found by
ocfs2_find_local_alias, so kmalloc
a new ocfs2_dentry_lock structure
to local variable "dl", dl1

               .....

                                    (B1) enter ocfs2_dentry_attach_lock,
                                    seeing dentry->d_fsdata is NULL,
                                    and no alias found by
                                    ocfs2_find_local_alias so kmalloc
                                    a new ocfs2_dentry_lock structure
                                    to local variable "dl", dl2.

                                                   ......

(A2) set dentry->d_fsdata with dl1,
call ocfs2_dentry_lock() and increase
dl1->dl_lockres.l_ro_holders to 1 on
success.
              ......

                                    (B2) set dentry->d_fsdata with dl2
                                    call ocfs2_dentry_lock() and increase
				    dl2->dl_lockres.l_ro_holders to 1 on
				    success.

                                                  ......

(A3) call ocfs2_dentry_unlock()
and decrease
dl2->dl_lockres.l_ro_holders to 0
on success.
             ....

                                    (B3) call ocfs2_dentry_unlock(),
                                    decreasing
				    dl2->dl_lockres.l_ro_holders, but
				    see it's zero now, panic

Link: http://lkml.kernel.org/r/20190529174636.22364-1-wen.gang.wang@oracle.com
Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com>
Reported-by: Daniel Sobe <daniel.sobe@nxp.com>
Tested-by: Daniel Sobe <daniel.sobe@nxp.com>
Reviewed-by: Changwei Ge <gechangwei@live.cn>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/ocfs2/dcache.c |   12 ++++++++++++
 1 file changed, 12 insertions(+)

--- a/fs/ocfs2/dcache.c
+++ b/fs/ocfs2/dcache.c
@@ -310,6 +310,18 @@ int ocfs2_dentry_attach_lock(struct dent
 
 out_attach:
 	spin_lock(&dentry_attach_lock);
+	if (unlikely(dentry->d_fsdata && !alias)) {
+		/* d_fsdata is set by a racing thread which is doing
+		 * the same thing as this thread is doing. Leave the racing
+		 * thread going ahead and we return here.
+		 */
+		spin_unlock(&dentry_attach_lock);
+		iput(dl->dl_inode);
+		ocfs2_lock_res_free(&dl->dl_lockres);
+		kfree(dl);
+		return 0;
+	}
+
 	dentry->d_fsdata = dl;
 	dl->dl_count++;
 	spin_unlock(&dentry_attach_lock);

[PATCH 4.9 061/117] [PATCH] signal/ptrace: Dont leak unitialized kernel memory with PTRACE_PEEK_SIGINFO

[Greg Kroah-Hartman]

[ Upstream commit f6e2aa91a46d2bc79fce9b93a988dbe7655c90c0 ]

Recently syzbot in conjunction with KMSAN reported that
ptrace_peek_siginfo can copy an uninitialized siginfo to userspace.
Inspecting ptrace_peek_siginfo confirms this.

The problem is that off when initialized from args.off can be
initialized to a negaive value.  At which point the "if (off >= 0)"
test to see if off became negative fails because off started off
negative.

Prevent the core problem by adding a variable found that is only true
if a siginfo is found and copied to a temporary in preparation for
being copied to userspace.

Prevent args.off from being truncated when being assigned to off by
testing that off is <= the maximum possible value of off.  Convert off
to an unsigned long so that we should not have to truncate args.off,
we have well defined overflow behavior so if we add another check we
won't risk fighting undefined compiler behavior, and so that we have a
type whose maximum value is easy to test for.

Cc: Andrei Vagin <avagin@gmail.com>
Cc: stable@vger.kernel.org
Reported-by: syzbot+0d602a1b0d8c95bdf299@syzkaller.appspotmail.com
Fixes: 84c751bd4aeb ("ptrace: add ability to retrieve signals without removing from a queue (v4)")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/ptrace.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/kernel/ptrace.c b/kernel/ptrace.c
index efba851ee018..df06d2fcbb92 100644
--- a/kernel/ptrace.c
+++ b/kernel/ptrace.c
@@ -710,6 +710,10 @@ static int ptrace_peek_siginfo(struct task_struct *child,
 	if (arg.nr < 0)
 		return -EINVAL;
 
+	/* Ensure arg.off fits in an unsigned long */
+	if (arg.off > ULONG_MAX)
+		return 0;
+
 	if (arg.flags & PTRACE_PEEKSIGINFO_SHARED)
 		pending = &child->signal->shared_pending;
 	else
@@ -717,18 +721,20 @@ static int ptrace_peek_siginfo(struct task_struct *child,
 
 	for (i = 0; i < arg.nr; ) {
 		siginfo_t info;
-		s32 off = arg.off + i;
+		unsigned long off = arg.off + i;
+		bool found = false;
 
 		spin_lock_irq(&child->sighand->siglock);
 		list_for_each_entry(q, &pending->list, list) {
 			if (!off--) {
+				found = true;
 				copy_siginfo(&info, &q->info);
 				break;
 			}
 		}
 		spin_unlock_irq(&child->sighand->siglock);
 
-		if (off >= 0) /* beyond the end of the list */
+		if (!found) /* beyond the end of the list */
 			break;
 
 #ifdef CONFIG_COMPAT
-- 
2.20.1

[PATCH 4.9 062/117] ptrace: restore smp_rmb() in __ptrace_may_access()

[Greg Kroah-Hartman]

From: Jann Horn <jannh@google.com>

commit f6581f5b55141a95657ef5742cf6a6bfa20a109f upstream.

Restore the read memory barrier in __ptrace_may_access() that was deleted
a couple years ago. Also add comments on this barrier and the one it pairs
with to explain why they're there (as far as I understand).

Fixes: bfedb589252c ("mm: Add a user_ns owner to mm_struct and fix ptrace permission checks")
Cc: stable@vger.kernel.org
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/cred.c   |    9 +++++++++
 kernel/ptrace.c |   10 ++++++++++
 2 files changed, 19 insertions(+)

--- a/kernel/cred.c
+++ b/kernel/cred.c
@@ -447,6 +447,15 @@ int commit_creds(struct cred *new)
 		if (task->mm)
 			set_dumpable(task->mm, suid_dumpable);
 		task->pdeath_signal = 0;
+		/*
+		 * If a task drops privileges and becomes nondumpable,
+		 * the dumpability change must become visible before
+		 * the credential change; otherwise, a __ptrace_may_access()
+		 * racing with this change may be able to attach to a task it
+		 * shouldn't be able to attach to (as if the task had dropped
+		 * privileges without becoming nondumpable).
+		 * Pairs with a read barrier in __ptrace_may_access().
+		 */
 		smp_wmb();
 	}
 
--- a/kernel/ptrace.c
+++ b/kernel/ptrace.c
@@ -322,6 +322,16 @@ static int __ptrace_may_access(struct ta
 	return -EPERM;
 ok:
 	rcu_read_unlock();
+	/*
+	 * If a task drops privileges and becomes nondumpable (through a syscall
+	 * like setresuid()) while we are trying to access it, we must ensure
+	 * that the dumpability is read after the credentials; otherwise,
+	 * we may be able to attach to a task that we shouldn't be able to
+	 * attach to (as if the task had dropped privileges without becoming
+	 * nondumpable).
+	 * Pairs with a write barrier in commit_creds().
+	 */
+	smp_rmb();
 	mm = task->mm;
 	if (mm &&
 	    ((get_dumpable(mm) != SUID_DUMP_USER) &&

[PATCH 4.9 063/117] media: v4l2-ioctl: clear fields in s_parm

[Greg Kroah-Hartman]

From: Hans Verkuil <hans.verkuil@cisco.com>

commit 8a7c5594c02022ca5fa7fb603e11b3e1feb76ed5 upstream.

Zero the reserved capture/output array.

Zero the extendedmode (it is never used in drivers).

Clear all flags in capture/outputmode except for V4L2_MODE_HIGHQUALITY,
as that is the only valid flag.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Cc: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/media/v4l2-core/v4l2-ioctl.c |   17 ++++++++++++++++-
 1 file changed, 16 insertions(+), 1 deletion(-)

--- a/drivers/media/v4l2-core/v4l2-ioctl.c
+++ b/drivers/media/v4l2-core/v4l2-ioctl.c
@@ -1959,7 +1959,22 @@ static int v4l_s_parm(const struct v4l2_
 	struct v4l2_streamparm *p = arg;
 	int ret = check_fmt(file, p->type);
 
-	return ret ? ret : ops->vidioc_s_parm(file, fh, p);
+	if (ret)
+		return ret;
+
+	/* Note: extendedmode is never used in drivers */
+	if (V4L2_TYPE_IS_OUTPUT(p->type)) {
+		memset(p->parm.output.reserved, 0,
+		       sizeof(p->parm.output.reserved));
+		p->parm.output.extendedmode = 0;
+		p->parm.output.outputmode &= V4L2_MODE_HIGHQUALITY;
+	} else {
+		memset(p->parm.capture.reserved, 0,
+		       sizeof(p->parm.capture.reserved));
+		p->parm.capture.extendedmode = 0;
+		p->parm.capture.capturemode &= V4L2_MODE_HIGHQUALITY;
+	}
+	return ops->vidioc_s_parm(file, fh, p);
 }
 
 static int v4l_queryctrl(const struct v4l2_ioctl_ops *ops,

[PATCH 4.9 064/117] i2c: acorn: fix i2c warning

[Greg Kroah-Hartman]

From: Russell King <rmk+kernel@armlinux.org.uk>

commit ca21f851cc9643af049226d57fabc3c883ea648e upstream.

The Acorn i2c driver (for RiscPC) triggers the "i2c adapter has no name"
warning in the I2C core driver, resulting in the RTC being inaccessible.
Fix this.

Fixes: 2236baa75f70 ("i2c: Sanity checks on adapter registration")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/i2c/busses/i2c-acorn.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/i2c/busses/i2c-acorn.c
+++ b/drivers/i2c/busses/i2c-acorn.c
@@ -83,6 +83,7 @@ static struct i2c_algo_bit_data ioc_data
 
 static struct i2c_adapter ioc_ops = {
 	.nr			= 0,
+	.name			= "ioc",
 	.algo_data		= &ioc_data,
 };
 

[PATCH 4.9 065/117] bcache: fix stack corruption by PRECEDING_KEY()

[Greg Kroah-Hartman]

From: Coly Li <colyli@suse.de>

commit 31b90956b124240aa8c63250243ae1a53585c5e2 upstream.

Recently people report bcache code compiled with gcc9 is broken, one of
the buggy behavior I observe is that two adjacent 4KB I/Os should merge
into one but they don't. Finally it turns out to be a stack corruption
caused by macro PRECEDING_KEY().

See how PRECEDING_KEY() is defined in bset.h,
437 #define PRECEDING_KEY(_k)                                       \
438 ({                                                              \
439         struct bkey *_ret = NULL;                               \
440                                                                 \
441         if (KEY_INODE(_k) || KEY_OFFSET(_k)) {                  \
442                 _ret = &KEY(KEY_INODE(_k), KEY_OFFSET(_k), 0);  \
443                                                                 \
444                 if (!_ret->low)                                 \
445                         _ret->high--;                           \
446                 _ret->low--;                                    \
447         }                                                       \
448                                                                 \
449         _ret;                                                   \
450 })

At line 442, _ret points to address of a on-stack variable combined by
KEY(), the life range of this on-stack variable is in line 442-446,
once _ret is returned to bch_btree_insert_key(), the returned address
points to an invalid stack address and this address is overwritten in
the following called bch_btree_iter_init(). Then argument 'search' of
bch_btree_iter_init() points to some address inside stackframe of
bch_btree_iter_init(), exact address depends on how the compiler
allocates stack space. Now the stack is corrupted.

Fixes: 0eacac22034c ("bcache: PRECEDING_KEY()")
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Rolf Fokkens <rolf@rolffokkens.nl>
Reviewed-by: Pierre JUHEN <pierre.juhen@orange.fr>
Tested-by: Shenghui Wang <shhuiw@foxmail.com>
Tested-by: Pierre JUHEN <pierre.juhen@orange.fr>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Nix <nix@esperi.org.uk>
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/md/bcache/bset.c |   16 +++++++++++++---
 drivers/md/bcache/bset.h |   34 ++++++++++++++++++++--------------
 2 files changed, 33 insertions(+), 17 deletions(-)

--- a/drivers/md/bcache/bset.c
+++ b/drivers/md/bcache/bset.c
@@ -823,12 +823,22 @@ unsigned bch_btree_insert_key(struct btr
 	struct bset *i = bset_tree_last(b)->data;
 	struct bkey *m, *prev = NULL;
 	struct btree_iter iter;
+	struct bkey preceding_key_on_stack = ZERO_KEY;
+	struct bkey *preceding_key_p = &preceding_key_on_stack;
 
 	BUG_ON(b->ops->is_extents && !KEY_SIZE(k));
 
-	m = bch_btree_iter_init(b, &iter, b->ops->is_extents
-				? PRECEDING_KEY(&START_KEY(k))
-				: PRECEDING_KEY(k));
+	/*
+	 * If k has preceding key, preceding_key_p will be set to address
+	 *  of k's preceding key; otherwise preceding_key_p will be set
+	 * to NULL inside preceding_key().
+	 */
+	if (b->ops->is_extents)
+		preceding_key(&START_KEY(k), &preceding_key_p);
+	else
+		preceding_key(k, &preceding_key_p);
+
+	m = bch_btree_iter_init(b, &iter, preceding_key_p);
 
 	if (b->ops->insert_fixup(b, k, &iter, replace_key))
 		return status;
--- a/drivers/md/bcache/bset.h
+++ b/drivers/md/bcache/bset.h
@@ -417,20 +417,26 @@ static inline bool bch_cut_back(const st
 	return __bch_cut_back(where, k);
 }
 
-#define PRECEDING_KEY(_k)					\
-({								\
-	struct bkey *_ret = NULL;				\
-								\
-	if (KEY_INODE(_k) || KEY_OFFSET(_k)) {			\
-		_ret = &KEY(KEY_INODE(_k), KEY_OFFSET(_k), 0);	\
-								\
-		if (!_ret->low)					\
-			_ret->high--;				\
-		_ret->low--;					\
-	}							\
-								\
-	_ret;							\
-})
+/*
+ * Pointer '*preceding_key_p' points to a memory object to store preceding
+ * key of k. If the preceding key does not exist, set '*preceding_key_p' to
+ * NULL. So the caller of preceding_key() needs to take care of memory
+ * which '*preceding_key_p' pointed to before calling preceding_key().
+ * Currently the only caller of preceding_key() is bch_btree_insert_key(),
+ * and it points to an on-stack variable, so the memory release is handled
+ * by stackframe itself.
+ */
+static inline void preceding_key(struct bkey *k, struct bkey **preceding_key_p)
+{
+	if (KEY_INODE(k) || KEY_OFFSET(k)) {
+		(**preceding_key_p) = KEY(KEY_INODE(k), KEY_OFFSET(k), 0);
+		if (!(*preceding_key_p)->low)
+			(*preceding_key_p)->high--;
+		(*preceding_key_p)->low--;
+	} else {
+		(*preceding_key_p) = NULL;
+	}
+}
 
 static inline bool bch_ptr_invalid(struct btree_keys *b, const struct bkey *k)
 {

[PATCH 4.9 066/117] cgroup: Use css_tryget() instead of css_tryget_online() in task_get_css()

[Greg Kroah-Hartman]

From: Tejun Heo <tj@kernel.org>

commit 18fa84a2db0e15b02baa5d94bdb5bd509175d2f6 upstream.

A PF_EXITING task can stay associated with an offline css.  If such
task calls task_get_css(), it can get stuck indefinitely.  This can be
triggered by BSD process accounting which writes to a file with
PF_EXITING set when racing against memcg disable as in the backtrace
at the end.

After this change, task_get_css() may return a css which was already
offline when the function was called.  None of the existing users are
affected by this change.

  INFO: rcu_sched self-detected stall on CPU
  INFO: rcu_sched detected stalls on CPUs/tasks:
  ...
  NMI backtrace for cpu 0
  ...
  Call Trace:
   <IRQ>
   dump_stack+0x46/0x68
   nmi_cpu_backtrace.cold.2+0x13/0x57
   nmi_trigger_cpumask_backtrace+0xba/0xca
   rcu_dump_cpu_stacks+0x9e/0xce
   rcu_check_callbacks.cold.74+0x2af/0x433
   update_process_times+0x28/0x60
   tick_sched_timer+0x34/0x70
   __hrtimer_run_queues+0xee/0x250
   hrtimer_interrupt+0xf4/0x210
   smp_apic_timer_interrupt+0x56/0x110
   apic_timer_interrupt+0xf/0x20
   </IRQ>
  RIP: 0010:balance_dirty_pages_ratelimited+0x28f/0x3d0
  ...
   btrfs_file_write_iter+0x31b/0x563
   __vfs_write+0xfa/0x140
   __kernel_write+0x4f/0x100
   do_acct_process+0x495/0x580
   acct_process+0xb9/0xdb
   do_exit+0x748/0xa00
   do_group_exit+0x3a/0xa0
   get_signal+0x254/0x560
   do_signal+0x23/0x5c0
   exit_to_usermode_loop+0x5d/0xa0
   prepare_exit_to_usermode+0x53/0x80
   retint_user+0x8/0x8

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org # v4.2+
Fixes: ec438699a9ae ("cgroup, block: implement task_get_css() and use it in bio_associate_current()")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 include/linux/cgroup.h |   10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

--- a/include/linux/cgroup.h
+++ b/include/linux/cgroup.h
@@ -462,7 +462,7 @@ static inline struct cgroup_subsys_state
  *
  * Find the css for the (@task, @subsys_id) combination, increment a
  * reference on and return it.  This function is guaranteed to return a
- * valid css.
+ * valid css.  The returned css may already have been offlined.
  */
 static inline struct cgroup_subsys_state *
 task_get_css(struct task_struct *task, int subsys_id)
@@ -472,7 +472,13 @@ task_get_css(struct task_struct *task, i
 	rcu_read_lock();
 	while (true) {
 		css = task_css(task, subsys_id);
-		if (likely(css_tryget_online(css)))
+		/*
+		 * Can't use css_tryget_online() here.  A task which has
+		 * PF_EXITING set may stay associated with an offline css.
+		 * If such task calls this function, css_tryget_online()
+		 * will keep failing.
+		 */
+		if (likely(css_tryget(css)))
 			break;
 		cpu_relax();
 	}

[PATCH 4.9 067/117] ASoC: cs42xx8: Add regcache mask dirty

[Greg Kroah-Hartman]

From: S.j. Wang <shengjiu.wang@nxp.com>

commit ad6eecbfc01c987e0253371f274c3872042e4350 upstream.

Add regcache_mark_dirty before regcache_sync for power
of codec may be lost at suspend, then all the register
need to be reconfigured.

Fixes: 0c516b4ff85c ("ASoC: cs42xx8: Add codec driver
support for CS42448/CS42888")
Cc: <stable@vger.kernel.org>
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/soc/codecs/cs42xx8.c |    1 +
 1 file changed, 1 insertion(+)

--- a/sound/soc/codecs/cs42xx8.c
+++ b/sound/soc/codecs/cs42xx8.c
@@ -569,6 +569,7 @@ static int cs42xx8_runtime_resume(struct
 	msleep(5);
 
 	regcache_cache_only(cs42xx8->regmap, false);
+	regcache_mark_dirty(cs42xx8->regmap);
 
 	ret = regcache_sync(cs42xx8->regmap);
 	if (ret) {

[PATCH 4.9 068/117] ASoC: fsl_asrc: Fix the issue about unsupported rate

[Greg Kroah-Hartman]

From: S.j. Wang <shengjiu.wang@nxp.com>

commit b06c58c2a1eed571ea2a6640fdb85b7b00196b1e upstream.

When the output sample rate is [8kHz, 30kHz], the limitation
of the supported ratio range is [1/24, 8]. In the driver
we use (8kHz, 30kHz) instead of [8kHz, 30kHz].
So this patch is to fix this issue and the potential rounding
issue with divider.

Fixes: fff6e03c7b65 ("ASoC: fsl_asrc: add support for 8-30kHz
output sample rate")
Cc: <stable@vger.kernel.org>
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/soc/fsl/fsl_asrc.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/sound/soc/fsl/fsl_asrc.c
+++ b/sound/soc/fsl/fsl_asrc.c
@@ -286,8 +286,8 @@ static int fsl_asrc_config_pair(struct f
 		return -EINVAL;
 	}
 
-	if ((outrate > 8000 && outrate < 30000) &&
-	    (outrate/inrate > 24 || inrate/outrate > 8)) {
+	if ((outrate >= 8000 && outrate <= 30000) &&
+	    (outrate > 24 * inrate || inrate > 8 * outrate)) {
 		pair_err("exceed supported ratio range [1/24, 8] for \
 				inrate/outrate: %d/%d\n", inrate, outrate);
 		return -EINVAL;

[PATCH 4.9 069/117] x86/uaccess, kcov: Disable stack protector

[Greg Kroah-Hartman]

[ Upstream commit 40ea97290b08be2e038b31cbb33097d1145e8169 ]

New tooling noticed this mishap:

  kernel/kcov.o: warning: objtool: write_comp_data()+0x138: call to __stack_chk_fail() with UACCESS enabled
  kernel/kcov.o: warning: objtool: __sanitizer_cov_trace_pc()+0xd9: call to __stack_chk_fail() with UACCESS enabled

All the other instrumentation (KASAN,UBSAN) also have stack protector
disabled.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/Makefile | 1 +
 1 file changed, 1 insertion(+)

diff --git a/kernel/Makefile b/kernel/Makefile
index 314e7d62f5f0..184fa9aa5802 100644
--- a/kernel/Makefile
+++ b/kernel/Makefile
@@ -28,6 +28,7 @@ KCOV_INSTRUMENT_extable.o := n
 # Don't self-instrument.
 KCOV_INSTRUMENT_kcov.o := n
 KASAN_SANITIZE_kcov.o := n
+CFLAGS_kcov.o := $(call cc-option, -fno-conserve-stack -fno-stack-protector)
 
 # cond_syscall is currently not LTO compatible
 CFLAGS_sys_ni.o = $(DISABLE_LTO)
-- 
2.20.1

[PATCH 4.9 070/117] ALSA: seq: Protect in-kernel ioctl calls with mutex

[Greg Kroah-Hartman]

[ Upstream commit feb689025fbb6f0aa6297d3ddf97de945ea4ad32 ]

ALSA OSS sequencer calls the ioctl function indirectly via
snd_seq_kernel_client_ctl().  While we already applied the protection
against races between the normal ioctls and writes via the client's
ioctl_mutex, this code path was left untouched.  And this seems to be
the cause of still remaining some rare UAF as spontaneously triggered
by syzkaller.

For the sake of robustness, wrap the ioctl_mutex also for the call via
snd_seq_kernel_client_ctl(), too.

Reported-by: syzbot+e4c8abb920efa77bace9@syzkaller.appspotmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/core/seq/seq_clientmgr.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/sound/core/seq/seq_clientmgr.c b/sound/core/seq/seq_clientmgr.c
index 09491b27092e..3b1b2e9fb33e 100644
--- a/sound/core/seq/seq_clientmgr.c
+++ b/sound/core/seq/seq_clientmgr.c
@@ -2354,14 +2354,19 @@ int snd_seq_kernel_client_ctl(int clientid, unsigned int cmd, void *arg)
 {
 	const struct ioctl_handler *handler;
 	struct snd_seq_client *client;
+	int err;
 
 	client = clientptr(clientid);
 	if (client == NULL)
 		return -ENXIO;
 
 	for (handler = ioctl_handlers; handler->cmd > 0; ++handler) {
-		if (handler->cmd == cmd)
-			return handler->func(client, arg);
+		if (handler->cmd == cmd) {
+			mutex_lock(&client->ioctl_mutex);
+			err = handler->func(client, arg);
+			mutex_unlock(&client->ioctl_mutex);
+			return err;
+		}
 	}
 
 	pr_debug("ALSA: seq unknown ioctl() 0x%x (type='%c', number=0x%02x)\n",
-- 
2.20.1

[PATCH 4.9 071/117] ALSA: seq: Fix race of get-subscription call vs port-delete ioctls

[Greg Kroah-Hartman]

[ Upstream commit 2eabc5ec8ab4d4748a82050dfcb994119b983750 ]

The snd_seq_ioctl_get_subscription() retrieves the port subscriber
information as a pointer, while the object isn't protected, hence it
may be deleted before the actual reference.  This race was spotted by
syzkaller and may lead to a UAF.

The fix is simply copying the data in the lookup function that
performs in the rwsem to protect against the deletion.

Reported-by: syzbot+9437020c82413d00222d@syzkaller.appspotmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/core/seq/seq_clientmgr.c | 10 ++--------
 sound/core/seq/seq_ports.c     | 13 ++++++++-----
 sound/core/seq/seq_ports.h     |  5 +++--
 3 files changed, 13 insertions(+), 15 deletions(-)

diff --git a/sound/core/seq/seq_clientmgr.c b/sound/core/seq/seq_clientmgr.c
index 3b1b2e9fb33e..881c965555c5 100644
--- a/sound/core/seq/seq_clientmgr.c
+++ b/sound/core/seq/seq_clientmgr.c
@@ -1905,20 +1905,14 @@ static int snd_seq_ioctl_get_subscription(struct snd_seq_client *client,
 	int result;
 	struct snd_seq_client *sender = NULL;
 	struct snd_seq_client_port *sport = NULL;
-	struct snd_seq_subscribers *p;
 
 	result = -EINVAL;
 	if ((sender = snd_seq_client_use_ptr(subs->sender.client)) == NULL)
 		goto __end;
 	if ((sport = snd_seq_port_use_ptr(sender, subs->sender.port)) == NULL)
 		goto __end;
-	p = snd_seq_port_get_subscription(&sport->c_src, &subs->dest);
-	if (p) {
-		result = 0;
-		*subs = p->info;
-	} else
-		result = -ENOENT;
-
+	result = snd_seq_port_get_subscription(&sport->c_src, &subs->dest,
+					       subs);
       __end:
       	if (sport)
 		snd_seq_port_unlock(sport);
diff --git a/sound/core/seq/seq_ports.c b/sound/core/seq/seq_ports.c
index a42e2ce4a726..9cfe4fcee9a5 100644
--- a/sound/core/seq/seq_ports.c
+++ b/sound/core/seq/seq_ports.c
@@ -635,20 +635,23 @@ int snd_seq_port_disconnect(struct snd_seq_client *connector,
 
 
 /* get matched subscriber */
-struct snd_seq_subscribers *snd_seq_port_get_subscription(struct snd_seq_port_subs_info *src_grp,
-							  struct snd_seq_addr *dest_addr)
+int snd_seq_port_get_subscription(struct snd_seq_port_subs_info *src_grp,
+				  struct snd_seq_addr *dest_addr,
+				  struct snd_seq_port_subscribe *subs)
 {
-	struct snd_seq_subscribers *s, *found = NULL;
+	struct snd_seq_subscribers *s;
+	int err = -ENOENT;
 
 	down_read(&src_grp->list_mutex);
 	list_for_each_entry(s, &src_grp->list_head, src_list) {
 		if (addr_match(dest_addr, &s->info.dest)) {
-			found = s;
+			*subs = s->info;
+			err = 0;
 			break;
 		}
 	}
 	up_read(&src_grp->list_mutex);
-	return found;
+	return err;
 }
 
 /*
diff --git a/sound/core/seq/seq_ports.h b/sound/core/seq/seq_ports.h
index 26bd71f36c41..06003b36652e 100644
--- a/sound/core/seq/seq_ports.h
+++ b/sound/core/seq/seq_ports.h
@@ -135,7 +135,8 @@ int snd_seq_port_subscribe(struct snd_seq_client_port *port,
 			   struct snd_seq_port_subscribe *info);
 
 /* get matched subscriber */
-struct snd_seq_subscribers *snd_seq_port_get_subscription(struct snd_seq_port_subs_info *src_grp,
-							  struct snd_seq_addr *dest_addr);
+int snd_seq_port_get_subscription(struct snd_seq_port_subs_info *src_grp,
+				  struct snd_seq_addr *dest_addr,
+				  struct snd_seq_port_subscribe *subs);
 
 #endif
-- 
2.20.1

[PATCH 4.9 072/117] Revert "ALSA: seq: Protect in-kernel ioctl calls with mutex"

[Greg Kroah-Hartman]

[ Upstream commit f0654ba94e33699b295ce4f3dc73094db6209035 ]

This reverts commit feb689025fbb6f0aa6297d3ddf97de945ea4ad32.

The fix attempt was incorrect, leading to the mutex deadlock through
the close of OSS sequencer client.  The proper fix needs more
consideration, so let's revert it now.

Fixes: feb689025fbb ("ALSA: seq: Protect in-kernel ioctl calls with mutex")
Reported-by: syzbot+47ded6c0f23016cde310@syzkaller.appspotmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/core/seq/seq_clientmgr.c | 9 ++-------
 1 file changed, 2 insertions(+), 7 deletions(-)

diff --git a/sound/core/seq/seq_clientmgr.c b/sound/core/seq/seq_clientmgr.c
index 881c965555c5..bc6d371031fc 100644
--- a/sound/core/seq/seq_clientmgr.c
+++ b/sound/core/seq/seq_clientmgr.c
@@ -2348,19 +2348,14 @@ int snd_seq_kernel_client_ctl(int clientid, unsigned int cmd, void *arg)
 {
 	const struct ioctl_handler *handler;
 	struct snd_seq_client *client;
-	int err;
 
 	client = clientptr(clientid);
 	if (client == NULL)
 		return -ENXIO;
 
 	for (handler = ioctl_handlers; handler->cmd > 0; ++handler) {
-		if (handler->cmd == cmd) {
-			mutex_lock(&client->ioctl_mutex);
-			err = handler->func(client, arg);
-			mutex_unlock(&client->ioctl_mutex);
-			return err;
-		}
+		if (handler->cmd == cmd)
+			return handler->func(client, arg);
 	}
 
 	pr_debug("ALSA: seq unknown ioctl() 0x%x (type='%c', number=0x%02x)\n",
-- 
2.20.1

[PATCH 4.9 073/117] Drivers: misc: fix out-of-bounds access in function param_set_kgdbts_var

[Greg Kroah-Hartman]

[ Upstream commit b281218ad4311a0342a40cb02fb17a363df08b48 ]

There is an out-of-bounds access to "config[len - 1]" array when the
variable "len" is zero.

See commit dada6a43b040 ("kgdboc: fix KASAN global-out-of-bounds bug
in param_set_kgdboc_var()") for details.

Signed-off-by: Young Xiao <YangX92@hotmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/misc/kgdbts.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/misc/kgdbts.c b/drivers/misc/kgdbts.c
index 99635dd9dbac..bb3a76ad80da 100644
--- a/drivers/misc/kgdbts.c
+++ b/drivers/misc/kgdbts.c
@@ -1132,7 +1132,7 @@ static void kgdbts_put_char(u8 chr)
 
 static int param_set_kgdbts_var(const char *kmessage, struct kernel_param *kp)
 {
-	int len = strlen(kmessage);
+	size_t len = strlen(kmessage);
 
 	if (len >= MAX_CONFIG_LEN) {
 		printk(KERN_ERR "kgdbts: config string too long\n");
@@ -1152,7 +1152,7 @@ static int param_set_kgdbts_var(const char *kmessage, struct kernel_param *kp)
 
 	strcpy(config, kmessage);
 	/* Chop out \n char as a result of echo */
-	if (config[len - 1] == '\n')
+	if (len && config[len - 1] == '\n')
 		config[len - 1] = '\0';
 
 	/* Go and configure with the new params. */
-- 
2.20.1

[PATCH 4.9 074/117] scsi: lpfc: add check for loss of ndlp when sending RRQ

[Greg Kroah-Hartman]

[ Upstream commit c8cb261a072c88ca1aff0e804a30db4c7606521b ]

There was a missing qualification of a valid ndlp structure when calling to
send an RRQ for an abort.  Add the check.

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Tested-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/lpfc/lpfc_els.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index 4905455bbfc7..b5be4df05733 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -6789,7 +6789,10 @@ int
 lpfc_send_rrq(struct lpfc_hba *phba, struct lpfc_node_rrq *rrq)
 {
 	struct lpfc_nodelist *ndlp = lpfc_findnode_did(rrq->vport,
-							rrq->nlp_DID);
+						       rrq->nlp_DID);
+	if (!ndlp)
+		return 1;
+
 	if (lpfc_test_rrq_active(phba, ndlp, rrq->xritag))
 		return lpfc_issue_els_rrq(rrq->vport, ndlp,
 					 rrq->nlp_DID, rrq);
-- 
2.20.1

[PATCH 4.9 075/117] arm64/mm: Inhibit huge-vmap with ptdump

[Greg Kroah-Hartman]

[ Upstream commit 7ba36eccb3f83983a651efd570b4f933ecad1b5c ]

The arm64 ptdump code can race with concurrent modification of the
kernel page tables. At the time this was added, this was sound as:

* Modifications to leaf entries could result in stale information being
  logged, but would not result in a functional problem.

* Boot time modifications to non-leaf entries (e.g. freeing of initmem)
  were performed when the ptdump code cannot be invoked.

* At runtime, modifications to non-leaf entries only occurred in the
  vmalloc region, and these were strictly additive, as intermediate
  entries were never freed.

However, since commit:

  commit 324420bf91f6 ("arm64: add support for ioremap() block mappings")

... it has been possible to create huge mappings in the vmalloc area at
runtime, and as part of this existing intermediate levels of table my be
removed and freed.

It's possible for the ptdump code to race with this, and continue to
walk tables which have been freed (and potentially poisoned or
reallocated). As a result of this, the ptdump code may dereference bogus
addresses, which could be fatal.

Since huge-vmap is a TLB and memory optimization, we can disable it when
the runtime ptdump code is in use to avoid this problem.

Cc: Catalin Marinas <catalin.marinas@arm.com>
Fixes: 324420bf91f60582 ("arm64: add support for ioremap() block mappings")
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/mm/mmu.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/mm/mmu.c b/arch/arm64/mm/mmu.c
index 0a56898f8410..efd65fc85238 100644
--- a/arch/arm64/mm/mmu.c
+++ b/arch/arm64/mm/mmu.c
@@ -765,13 +765,18 @@ void *__init fixmap_remap_fdt(phys_addr_t dt_phys)
 
 int __init arch_ioremap_pud_supported(void)
 {
-	/* only 4k granule supports level 1 block mappings */
-	return IS_ENABLED(CONFIG_ARM64_4K_PAGES);
+	/*
+	 * Only 4k granule supports level 1 block mappings.
+	 * SW table walks can't handle removal of intermediate entries.
+	 */
+	return IS_ENABLED(CONFIG_ARM64_4K_PAGES) &&
+	       !IS_ENABLED(CONFIG_ARM64_PTDUMP_DEBUGFS);
 }
 
 int __init arch_ioremap_pmd_supported(void)
 {
-	return 1;
+	/* See arch_ioremap_pud_supported() */
+	return !IS_ENABLED(CONFIG_ARM64_PTDUMP_DEBUGFS);
 }
 
 int pud_set_huge(pud_t *pud, phys_addr_t phys, pgprot_t prot)
-- 
2.20.1

[PATCH 4.9 076/117] scsi: bnx2fc: fix incorrect cast to u64 on shift operation

[Greg Kroah-Hartman]

[ Upstream commit d0c0d902339249c75da85fd9257a86cbb98dfaa5 ]

Currently an int is being shifted and the result is being cast to a u64
which leads to undefined behaviour if the shift is more than 31 bits. Fix
this by casting the integer value 1 to u64 before the shift operation.

Addresses-Coverity: ("Bad shift operation")
Fixes: 7b594769120b ("[SCSI] bnx2fc: Handle REC_TOV error code from firmware")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/bnx2fc/bnx2fc_hwi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/bnx2fc/bnx2fc_hwi.c b/drivers/scsi/bnx2fc/bnx2fc_hwi.c
index 5ff9f89c17c7..39b2f60149d9 100644
--- a/drivers/scsi/bnx2fc/bnx2fc_hwi.c
+++ b/drivers/scsi/bnx2fc/bnx2fc_hwi.c
@@ -829,7 +829,7 @@ ret_err_rqe:
 			((u64)err_entry->data.err_warn_bitmap_hi << 32) |
 			(u64)err_entry->data.err_warn_bitmap_lo;
 		for (i = 0; i < BNX2FC_NUM_ERR_BITS; i++) {
-			if (err_warn_bit_map & (u64) (1 << i)) {
+			if (err_warn_bit_map & ((u64)1 << i)) {
 				err_warn = i;
 				break;
 			}
-- 
2.20.1

[PATCH 4.9 077/117] selftests/timers: Add missing fflush(stdout) calls

[Greg Kroah-Hartman]

[ Upstream commit fe48319243a626c860fd666ca032daacc2ba84a5 ]

When running under a pipe, some timer tests would not report output in
real-time because stdout flushes were missing after printf()s that lacked
a newline. This adds them to restore real-time status output that humans
can enjoy.

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/timers/adjtick.c        | 1 +
 tools/testing/selftests/timers/leapcrash.c      | 1 +
 tools/testing/selftests/timers/mqueue-lat.c     | 1 +
 tools/testing/selftests/timers/nanosleep.c      | 1 +
 tools/testing/selftests/timers/nsleep-lat.c     | 1 +
 tools/testing/selftests/timers/raw_skew.c       | 1 +
 tools/testing/selftests/timers/set-tai.c        | 1 +
 tools/testing/selftests/timers/set-tz.c         | 2 ++
 tools/testing/selftests/timers/threadtest.c     | 1 +
 tools/testing/selftests/timers/valid-adjtimex.c | 2 ++
 10 files changed, 12 insertions(+)

diff --git a/tools/testing/selftests/timers/adjtick.c b/tools/testing/selftests/timers/adjtick.c
index 9887fd538fec..91316ab4b041 100644
--- a/tools/testing/selftests/timers/adjtick.c
+++ b/tools/testing/selftests/timers/adjtick.c
@@ -147,6 +147,7 @@ int check_tick_adj(long tickval)
 
 	eppm = get_ppm_drift();
 	printf("%lld usec, %lld ppm", systick + (systick * eppm / MILLION), eppm);
+	fflush(stdout);
 
 	tx1.modes = 0;
 	adjtimex(&tx1);
diff --git a/tools/testing/selftests/timers/leapcrash.c b/tools/testing/selftests/timers/leapcrash.c
index a1071bdbdeb7..a77c70b47495 100644
--- a/tools/testing/selftests/timers/leapcrash.c
+++ b/tools/testing/selftests/timers/leapcrash.c
@@ -114,6 +114,7 @@ int main(void)
 		}
 		clear_time_state();
 		printf(".");
+		fflush(stdout);
 	}
 	printf("[OK]\n");
 	return ksft_exit_pass();
diff --git a/tools/testing/selftests/timers/mqueue-lat.c b/tools/testing/selftests/timers/mqueue-lat.c
index a2a3924d0b41..efdb62470052 100644
--- a/tools/testing/selftests/timers/mqueue-lat.c
+++ b/tools/testing/selftests/timers/mqueue-lat.c
@@ -113,6 +113,7 @@ int main(int argc, char **argv)
 	int ret;
 
 	printf("Mqueue latency :                          ");
+	fflush(stdout);
 
 	ret = mqueue_lat_test();
 	if (ret < 0) {
diff --git a/tools/testing/selftests/timers/nanosleep.c b/tools/testing/selftests/timers/nanosleep.c
index ff942ff7c9b3..2e6e94c02a33 100644
--- a/tools/testing/selftests/timers/nanosleep.c
+++ b/tools/testing/selftests/timers/nanosleep.c
@@ -153,6 +153,7 @@ int main(int argc, char **argv)
 			continue;
 
 		printf("Nanosleep %-31s ", clockstring(clockid));
+		fflush(stdout);
 
 		length = 10;
 		while (length <= (NSEC_PER_SEC * 10)) {
diff --git a/tools/testing/selftests/timers/nsleep-lat.c b/tools/testing/selftests/timers/nsleep-lat.c
index 2d7898fda0f1..ac06cf10a5c2 100644
--- a/tools/testing/selftests/timers/nsleep-lat.c
+++ b/tools/testing/selftests/timers/nsleep-lat.c
@@ -166,6 +166,7 @@ int main(int argc, char **argv)
 			continue;
 
 		printf("nsleep latency %-26s ", clockstring(clockid));
+		fflush(stdout);
 
 		length = 10;
 		while (length <= (NSEC_PER_SEC * 10)) {
diff --git a/tools/testing/selftests/timers/raw_skew.c b/tools/testing/selftests/timers/raw_skew.c
index 0ab937a17ebb..4e631da7f956 100644
--- a/tools/testing/selftests/timers/raw_skew.c
+++ b/tools/testing/selftests/timers/raw_skew.c
@@ -124,6 +124,7 @@ int main(int argv, char **argc)
 		printf("WARNING: ADJ_OFFSET in progress, this will cause inaccurate results\n");
 
 	printf("Estimating clock drift: ");
+	fflush(stdout);
 	sleep(120);
 
 	get_monotonic_and_raw(&mon, &raw);
diff --git a/tools/testing/selftests/timers/set-tai.c b/tools/testing/selftests/timers/set-tai.c
index dc88dbc8831f..3ae76ab483de 100644
--- a/tools/testing/selftests/timers/set-tai.c
+++ b/tools/testing/selftests/timers/set-tai.c
@@ -66,6 +66,7 @@ int main(int argc, char **argv)
 	printf("tai offset started at %i\n", ret);
 
 	printf("Checking tai offsets can be properly set: ");
+	fflush(stdout);
 	for (i = 1; i <= 60; i++) {
 		ret = set_tai(i);
 		ret = get_tai();
diff --git a/tools/testing/selftests/timers/set-tz.c b/tools/testing/selftests/timers/set-tz.c
index f4184928b16b..b038131c9682 100644
--- a/tools/testing/selftests/timers/set-tz.c
+++ b/tools/testing/selftests/timers/set-tz.c
@@ -76,6 +76,7 @@ int main(int argc, char **argv)
 	printf("tz_minuteswest started at %i, dst at %i\n", min, dst);
 
 	printf("Checking tz_minuteswest can be properly set: ");
+	fflush(stdout);
 	for (i = -15*60; i < 15*60; i += 30) {
 		ret = set_tz(i, dst);
 		ret = get_tz_min();
@@ -87,6 +88,7 @@ int main(int argc, char **argv)
 	printf("[OK]\n");
 
 	printf("Checking invalid tz_minuteswest values are caught: ");
+	fflush(stdout);
 
 	if (!set_tz(-15*60-1, dst)) {
 		printf("[FAILED] %i didn't return failure!\n", -15*60-1);
diff --git a/tools/testing/selftests/timers/threadtest.c b/tools/testing/selftests/timers/threadtest.c
index e632e116f05e..a4bf736dd842 100644
--- a/tools/testing/selftests/timers/threadtest.c
+++ b/tools/testing/selftests/timers/threadtest.c
@@ -175,6 +175,7 @@ int main(int argc, char **argv)
 	strftime(buf, 255, "%a, %d %b %Y %T %z", localtime(&start));
 	printf("%s\n", buf);
 	printf("Testing consistency with %i threads for %ld seconds: ", thread_count, runtime);
+	fflush(stdout);
 
 	/* spawn */
 	for (i = 0; i < thread_count; i++)
diff --git a/tools/testing/selftests/timers/valid-adjtimex.c b/tools/testing/selftests/timers/valid-adjtimex.c
index 60fe3c569bd9..a747645d79f4 100644
--- a/tools/testing/selftests/timers/valid-adjtimex.c
+++ b/tools/testing/selftests/timers/valid-adjtimex.c
@@ -134,6 +134,7 @@ int validate_freq(void)
 	/* Set the leap second insert flag */
 
 	printf("Testing ADJ_FREQ... ");
+	fflush(stdout);
 	for (i = 0; i < NUM_FREQ_VALID; i++) {
 		tx.modes = ADJ_FREQUENCY;
 		tx.freq = valid_freq[i];
@@ -261,6 +262,7 @@ int set_bad_offset(long sec, long usec, int use_nano)
 int validate_set_offset(void)
 {
 	printf("Testing ADJ_SETOFFSET... ");
+	fflush(stdout);
 
 	/* Test valid values */
 	if (set_offset(NSEC_PER_SEC - 1, 1))
-- 
2.20.1

[PATCH 4.9 078/117] usbnet: ipheth: fix racing condition

[Greg Kroah-Hartman]

[ Upstream commit 94d250fae48e6f873d8362308f5c4d02cd1b1fd2 ]

Fix a racing condition in ipheth.c that can lead to slow performance.

Bug: In ipheth_tx(), netif_wake_queue() may be called on the callback
ipheth_sndbulk_callback(), _before_ netif_stop_queue() is called.
When this happens, the queue is stopped longer than it needs to be,
thus reducing network performance.

Fix: Move netif_stop_queue() in front of usb_submit_urb(). Now the order
is always correct. In case, usb_submit_urb() fails, the queue is woken up
again as callback will not fire.

Testing: This racing condition is usually not noticeable, as it has to
occur very frequently to slowdown the network. The callback from the USB
is usually triggered slow enough, so the situation does not appear.
However, on a Ubuntu Linux on VMWare Workstation, running on Windows 10,
the we loose the race quite often and the following speedup can be noticed:

Without this patch: Download:  4.10 Mbit/s, Upload:  4.01 Mbit/s
With this patch:    Download: 36.23 Mbit/s, Upload: 17.61 Mbit/s

Signed-off-by: Oliver Zweigle <Oliver.Zweigle@faro.com>
Signed-off-by: Bernd Eckstein <3ernd.Eckstein@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/ipheth.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/usb/ipheth.c b/drivers/net/usb/ipheth.c
index 01f95d192d25..2b16a5fed9de 100644
--- a/drivers/net/usb/ipheth.c
+++ b/drivers/net/usb/ipheth.c
@@ -437,17 +437,18 @@ static int ipheth_tx(struct sk_buff *skb, struct net_device *net)
 			  dev);
 	dev->tx_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
 
+	netif_stop_queue(net);
 	retval = usb_submit_urb(dev->tx_urb, GFP_ATOMIC);
 	if (retval) {
 		dev_err(&dev->intf->dev, "%s: usb_submit_urb: %d\n",
 			__func__, retval);
 		dev->net->stats.tx_errors++;
 		dev_kfree_skb_any(skb);
+		netif_wake_queue(net);
 	} else {
 		dev->net->stats.tx_packets++;
 		dev->net->stats.tx_bytes += skb->len;
 		dev_consume_skb_any(skb);
-		netif_stop_queue(net);
 	}
 
 	return NETDEV_TX_OK;
-- 
2.20.1

[PATCH 4.9 079/117] KVM: x86/pmu: do not mask the value that is written to fixed PMUs

[Greg Kroah-Hartman]

[ Upstream commit 2924b52117b2812e9633d5ea337333299166d373 ]

According to the SDM, for MSR_IA32_PERFCTR0/1 "the lower-order 32 bits of
each MSR may be written with any value, and the high-order 8 bits are
sign-extended according to the value of bit 31", but the fixed counters
in real hardware are limited to the width of the fixed counters ("bits
beyond the width of the fixed-function counter are reserved and must be
written as zeros").  Fix KVM to do the same.

Reported-by: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kvm/pmu_intel.c | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

diff --git a/arch/x86/kvm/pmu_intel.c b/arch/x86/kvm/pmu_intel.c
index 5ab4a364348e..2729131fe9bf 100644
--- a/arch/x86/kvm/pmu_intel.c
+++ b/arch/x86/kvm/pmu_intel.c
@@ -235,11 +235,14 @@ static int intel_pmu_set_msr(struct kvm_vcpu *vcpu, struct msr_data *msr_info)
 		}
 		break;
 	default:
-		if ((pmc = get_gp_pmc(pmu, msr, MSR_IA32_PERFCTR0)) ||
-		    (pmc = get_fixed_pmc(pmu, msr))) {
-			if (!msr_info->host_initiated)
-				data = (s64)(s32)data;
-			pmc->counter += data - pmc_read_counter(pmc);
+		if ((pmc = get_gp_pmc(pmu, msr, MSR_IA32_PERFCTR0))) {
+			if (msr_info->host_initiated)
+				pmc->counter = data;
+			else
+				pmc->counter = (s32)data;
+			return 0;
+		} else if ((pmc = get_fixed_pmc(pmu, msr))) {
+			pmc->counter = data;
 			return 0;
 		} else if ((pmc = get_gp_pmc(pmu, msr, MSR_P6_EVNTSEL0))) {
 			if (data == pmc->eventsel)
-- 
2.20.1

[PATCH 4.9 080/117] KVM: s390: fix memory slot handling for KVM_SET_USER_MEMORY_REGION

[Greg Kroah-Hartman]

[ Upstream commit 19ec166c3f39fe1d3789888a74cc95544ac266d4 ]

kselftests exposed a problem in the s390 handling for memory slots.
Right now we only do proper memory slot handling for creation of new
memory slots. Neither MOVE, nor DELETION are handled properly. Let us
implement those.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/s390/kvm/kvm-s390.c | 35 +++++++++++++++++++++--------------
 1 file changed, 21 insertions(+), 14 deletions(-)

diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c
index 2032ab81b2d7..07f571900676 100644
--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@@ -3288,21 +3288,28 @@ void kvm_arch_commit_memory_region(struct kvm *kvm,
 				const struct kvm_memory_slot *new,
 				enum kvm_mr_change change)
 {
-	int rc;
-
-	/* If the basics of the memslot do not change, we do not want
-	 * to update the gmap. Every update causes several unnecessary
-	 * segment translation exceptions. This is usually handled just
-	 * fine by the normal fault handler + gmap, but it will also
-	 * cause faults on the prefix page of running guest CPUs.
-	 */
-	if (old->userspace_addr == mem->userspace_addr &&
-	    old->base_gfn * PAGE_SIZE == mem->guest_phys_addr &&
-	    old->npages * PAGE_SIZE == mem->memory_size)
-		return;
+	int rc = 0;
 
-	rc = gmap_map_segment(kvm->arch.gmap, mem->userspace_addr,
-		mem->guest_phys_addr, mem->memory_size);
+	switch (change) {
+	case KVM_MR_DELETE:
+		rc = gmap_unmap_segment(kvm->arch.gmap, old->base_gfn * PAGE_SIZE,
+					old->npages * PAGE_SIZE);
+		break;
+	case KVM_MR_MOVE:
+		rc = gmap_unmap_segment(kvm->arch.gmap, old->base_gfn * PAGE_SIZE,
+					old->npages * PAGE_SIZE);
+		if (rc)
+			break;
+		/* FALLTHROUGH */
+	case KVM_MR_CREATE:
+		rc = gmap_map_segment(kvm->arch.gmap, mem->userspace_addr,
+				      mem->guest_phys_addr, mem->memory_size);
+		break;
+	case KVM_MR_FLAGS_ONLY:
+		break;
+	default:
+		WARN(1, "Unknown KVM MR CHANGE: %d\n", change);
+	}
 	if (rc)
 		pr_warn("failed to commit memory region\n");
 	return;
-- 
2.20.1

[PATCH 4.9 081/117] drm/vmwgfx: integer underflow in vmw_cmd_dx_set_shader() leading to an invalid read

[Greg Kroah-Hartman]

From: Murray McAllister <murray.mcallister@gmail.com>

commit 5ed7f4b5eca11c3c69e7c8b53e4321812bc1ee1e upstream.

If SVGA_3D_CMD_DX_SET_SHADER is called with a shader ID
of SVGA3D_INVALID_ID, and a shader type of
SVGA3D_SHADERTYPE_INVALID, the calculated binding.shader_slot
will be 4294967295, leading to an out-of-bounds read in vmw_binding_loc()
when the offset is calculated.

Cc: <stable@vger.kernel.org>
Fixes: d80efd5cb3de ("drm/vmwgfx: Initial DX support")
Signed-off-by: Murray McAllister <murray.mcallister@gmail.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>


---
 drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c
@@ -2493,7 +2493,8 @@ static int vmw_cmd_dx_set_shader(struct
 
 	cmd = container_of(header, typeof(*cmd), header);
 
-	if (cmd->body.type >= SVGA3D_SHADERTYPE_DX10_MAX) {
+	if (cmd->body.type >= SVGA3D_SHADERTYPE_DX10_MAX ||
+	    cmd->body.type < SVGA3D_SHADERTYPE_MIN) {
 		DRM_ERROR("Illegal shader type %u.\n",
 			  (unsigned) cmd->body.type);
 		return -EINVAL;

[PATCH 4.9 082/117] drm/vmwgfx: NULL pointer dereference from vmw_cmd_dx_view_define()

[Greg Kroah-Hartman]

From: Murray McAllister <murray.mcallister@gmail.com>

commit bcd6aa7b6cbfd6f985f606c6f76046d782905820 upstream.

If SVGA_3D_CMD_DX_DEFINE_RENDERTARGET_VIEW is called with a surface
ID of SVGA3D_INVALID_ID, the srf struct will remain NULL after
vmw_cmd_res_check(), leading to a null pointer dereference in
vmw_view_add().

Cc: <stable@vger.kernel.org>
Fixes: d80efd5cb3de ("drm/vmwgfx: Initial DX support")
Signed-off-by: Murray McAllister <murray.mcallister@gmail.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>


---
 drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c
@@ -2733,6 +2733,10 @@ static int vmw_cmd_dx_view_define(struct
 	if (view_type == vmw_view_max)
 		return -EINVAL;
 	cmd = container_of(header, typeof(*cmd), header);
+	if (unlikely(cmd->sid == SVGA3D_INVALID_ID)) {
+		DRM_ERROR("Invalid surface id.\n");
+		return -EINVAL;
+	}
 	ret = vmw_cmd_res_check(dev_priv, sw_context, vmw_res_surface,
 				user_surface_converter,
 				&cmd->sid, &srf_node);

[PATCH 4.9 083/117] usb: dwc2: Fix DMA cache alignment issues

[Greg Kroah-Hartman]

From: Martin Schiller <ms@dev.tdt.de>

commit 4a4863bf2e7932e584a3a462d3c6daf891142ddc upstream.

Insert a padding between data and the stored_xfer_buffer pointer to
ensure they are not on the same cache line.

Otherwise, the stored_xfer_buffer gets corrupted for IN URBs on
non-cache-coherent systems. (In my case: Lantiq xRX200 MIPS)

Fixes: 3bc04e28a030 ("usb: dwc2: host: Get aligned DMA in a more supported way")
Fixes: 56406e017a88 ("usb: dwc2: Fix DMA alignment to start at allocated boundary")
Cc: <stable@vger.kernel.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Minas Harutyunyan <hminas@synopsys.com>
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/dwc2/hcd.c |   10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

--- a/drivers/usb/dwc2/hcd.c
+++ b/drivers/usb/dwc2/hcd.c
@@ -2552,8 +2552,10 @@ static void dwc2_free_dma_aligned_buffer
 		return;
 
 	/* Restore urb->transfer_buffer from the end of the allocated area */
-	memcpy(&stored_xfer_buffer, urb->transfer_buffer +
-	       urb->transfer_buffer_length, sizeof(urb->transfer_buffer));
+	memcpy(&stored_xfer_buffer,
+	       PTR_ALIGN(urb->transfer_buffer + urb->transfer_buffer_length,
+			 dma_get_cache_alignment()),
+	       sizeof(urb->transfer_buffer));
 
 	if (usb_urb_dir_in(urb))
 		memcpy(stored_xfer_buffer, urb->transfer_buffer,
@@ -2580,6 +2582,7 @@ static int dwc2_alloc_dma_aligned_buffer
 	 * DMA
 	 */
 	kmalloc_size = urb->transfer_buffer_length +
+		(dma_get_cache_alignment() - 1) +
 		sizeof(urb->transfer_buffer);
 
 	kmalloc_ptr = kmalloc(kmalloc_size, mem_flags);
@@ -2590,7 +2593,8 @@ static int dwc2_alloc_dma_aligned_buffer
 	 * Position value of original urb->transfer_buffer pointer to the end
 	 * of allocation for later referencing
 	 */
-	memcpy(kmalloc_ptr + urb->transfer_buffer_length,
+	memcpy(PTR_ALIGN(kmalloc_ptr + urb->transfer_buffer_length,
+			 dma_get_cache_alignment()),
 	       &urb->transfer_buffer, sizeof(urb->transfer_buffer));
 
 	if (usb_urb_dir_out(urb))

[PATCH 4.9 084/117] USB: Fix chipmunk-like voice when using Logitech C270 for recording audio.

[Greg Kroah-Hartman]

From: Marco Zatta <marco@zatta.me>

commit bd21f0222adab64974b7d1b4b8c7ce6b23e9ea4d upstream.

This patch fixes the chipmunk-like voice that manifets randomly when
using the integrated mic of the Logitech Webcam HD C270.

The issue was solved initially for this device by commit 2394d67e446b
("USB: add RESET_RESUME for webcams shown to be quirky") but it was then
reintroduced by e387ef5c47dd ("usb: Add USB_QUIRK_RESET_RESUME for all
Logitech UVC webcams"). This patch is to have the fix back.

Signed-off-by: Marco Zatta <marco@zatta.me>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/core/quirks.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -70,6 +70,9 @@ static const struct usb_device_id usb_qu
 	/* Cherry Stream G230 2.0 (G85-231) and 3.0 (G85-232) */
 	{ USB_DEVICE(0x046a, 0x0023), .driver_info = USB_QUIRK_RESET_RESUME },
 
+	/* Logitech HD Webcam C270 */
+	{ USB_DEVICE(0x046d, 0x0825), .driver_info = USB_QUIRK_RESET_RESUME },
+
 	/* Logitech HD Pro Webcams C920, C920-C, C925e and C930e */
 	{ USB_DEVICE(0x046d, 0x082d), .driver_info = USB_QUIRK_DELAY_INIT },
 	{ USB_DEVICE(0x046d, 0x0841), .driver_info = USB_QUIRK_DELAY_INIT },

[PATCH 4.9 085/117] USB: usb-storage: Add new ID to ums-realtek

[Greg Kroah-Hartman]

From: Kai-Heng Feng <kai.heng.feng@canonical.com>

commit 1a6dd3fea131276a4fc44ae77b0f471b0b473577 upstream.

There is one more Realtek card reader requires ums-realtek to work
correctly.

Add the device ID to support it.

Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/storage/unusual_realtek.h |    5 +++++
 1 file changed, 5 insertions(+)

--- a/drivers/usb/storage/unusual_realtek.h
+++ b/drivers/usb/storage/unusual_realtek.h
@@ -29,6 +29,11 @@ UNUSUAL_DEV(0x0bda, 0x0138, 0x0000, 0x99
 		"USB Card Reader",
 		USB_SC_DEVICE, USB_PR_DEVICE, init_realtek_cr, 0),
 
+UNUSUAL_DEV(0x0bda, 0x0153, 0x0000, 0x9999,
+		"Realtek",
+		"USB Card Reader",
+		USB_SC_DEVICE, USB_PR_DEVICE, init_realtek_cr, 0),
+
 UNUSUAL_DEV(0x0bda, 0x0158, 0x0000, 0x9999,
 		"Realtek",
 		"USB Card Reader",

[PATCH 4.9 086/117] USB: serial: pl2303: add Allied Telesis VT-Kit3

[Greg Kroah-Hartman]

From: Chris Packham <chris.packham@alliedtelesis.co.nz>

commit c5f81656a18b271976a86724dadd8344e54de74e upstream.

This is adds the vendor and device id for the AT-VT-Kit3 which is a
pl2303-based device.

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/pl2303.c |    1 +
 drivers/usb/serial/pl2303.h |    3 +++
 2 files changed, 4 insertions(+)

--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -101,6 +101,7 @@ static const struct usb_device_id id_tab
 	{ USB_DEVICE(SANWA_VENDOR_ID, SANWA_PRODUCT_ID) },
 	{ USB_DEVICE(ADLINK_VENDOR_ID, ADLINK_ND6530_PRODUCT_ID) },
 	{ USB_DEVICE(SMART_VENDOR_ID, SMART_PRODUCT_ID) },
+	{ USB_DEVICE(AT_VENDOR_ID, AT_VTKIT3_PRODUCT_ID) },
 	{ }					/* Terminating entry */
 };
 
--- a/drivers/usb/serial/pl2303.h
+++ b/drivers/usb/serial/pl2303.h
@@ -159,3 +159,6 @@
 #define SMART_VENDOR_ID	0x0b8c
 #define SMART_PRODUCT_ID	0x2303
 
+/* Allied Telesis VT-Kit3 */
+#define AT_VENDOR_ID		0x0caa
+#define AT_VTKIT3_PRODUCT_ID	0x3001

[PATCH 4.9 087/117] USB: serial: option: add support for Simcom SIM7500/SIM7600 RNDIS mode

[Greg Kroah-Hartman]

From: Jörgen Storvist <jorgen.storvist@gmail.com>

commit 5417a7e482962952e622eabd60cd3600dd65dedf upstream.

Added IDs for Simcom SIM7500/SIM7600 series cellular module in RNDIS
mode. Reserved the interface for ADB.

T:  Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  7 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1e0e ProdID=9011 Rev=03.18
S:  Manufacturer=SimTech, Incorporated
S:  Product=SimTech, Incorporated
S:  SerialNumber=0123456789ABCDEF
C:  #Ifs= 8 Cfg#= 1 Atr=a0 MxPwr=500mA
I:  If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=02 Prot=ff Driver=rndis_host
I:  If#=0x1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host
I:  If#=0x2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I:  If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#=0x5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#=0x6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#=0x7 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)

Signed-off-by: Jörgen Storvist <jorgen.storvist@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/option.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1767,6 +1767,8 @@ static const struct usb_device_id option
 	{ USB_DEVICE(ALINK_VENDOR_ID, SIMCOM_PRODUCT_SIM7100E),
 	  .driver_info = RSVD(5) | RSVD(6) },
 	{ USB_DEVICE_INTERFACE_CLASS(0x1e0e, 0x9003, 0xff) },	/* Simcom SIM7500/SIM7600 MBIM mode */
+	{ USB_DEVICE_INTERFACE_CLASS(0x1e0e, 0x9011, 0xff),	/* Simcom SIM7500/SIM7600 RNDIS mode */
+	  .driver_info = RSVD(7) },
 	{ USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X060S_X200),
 	  .driver_info = NCTRL(0) | NCTRL(1) | RSVD(4) },
 	{ USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X220_X500D),

[PATCH 4.9 088/117] USB: serial: option: add Telit 0x1260 and 0x1261 compositions

[Greg Kroah-Hartman]

From: Daniele Palmas <dnlplm@gmail.com>

commit f3dfd4072c3ee6e287f501a18b5718b185d6a940 upstream.

Added support for Telit LE910Cx 0x1260 and 0x1261 compositions.

Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/option.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1166,6 +1166,10 @@ static const struct usb_device_id option
 	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920A4_1213, 0xff) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920A4_1214),
 	  .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) | RSVD(3) },
+	{ USB_DEVICE(TELIT_VENDOR_ID, 0x1260),
+	  .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) },
+	{ USB_DEVICE(TELIT_VENDOR_ID, 0x1261),
+	  .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, 0x1900),				/* Telit LN940 (QMI) */
 	  .driver_info = NCTRL(0) | RSVD(1) },
 	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1901, 0xff),	/* Telit LN940 (MBIM) */

[PATCH 4.9 089/117] rtc: pcf8523: dont return invalid date when battery is low

[Greg Kroah-Hartman]

From: Baruch Siach <baruch@tkos.co.il>

commit ecb4a353d3afd45b9bb30c85d03ee113a0589079 upstream.

The RTC_VL_READ ioctl reports the low battery condition. Still,
pcf8523_rtc_read_time() happily returns invalid dates in this case.
Check the battery health on pcf8523_rtc_read_time() to avoid that.

Reported-by: Erik Čuk <erik.cuk@domel.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/rtc/rtc-pcf8523.c |   32 ++++++++++++++++++++++++--------
 1 file changed, 24 insertions(+), 8 deletions(-)

--- a/drivers/rtc/rtc-pcf8523.c
+++ b/drivers/rtc/rtc-pcf8523.c
@@ -82,6 +82,18 @@ static int pcf8523_write(struct i2c_clie
 	return 0;
 }
 
+static int pcf8523_voltage_low(struct i2c_client *client)
+{
+	u8 value;
+	int err;
+
+	err = pcf8523_read(client, REG_CONTROL3, &value);
+	if (err < 0)
+		return err;
+
+	return !!(value & REG_CONTROL3_BLF);
+}
+
 static int pcf8523_select_capacitance(struct i2c_client *client, bool high)
 {
 	u8 value;
@@ -164,6 +176,14 @@ static int pcf8523_rtc_read_time(struct
 	struct i2c_msg msgs[2];
 	int err;
 
+	err = pcf8523_voltage_low(client);
+	if (err < 0) {
+		return err;
+	} else if (err > 0) {
+		dev_err(dev, "low voltage detected, time is unreliable\n");
+		return -EINVAL;
+	}
+
 	msgs[0].addr = client->addr;
 	msgs[0].flags = 0;
 	msgs[0].len = 1;
@@ -248,17 +268,13 @@ static int pcf8523_rtc_ioctl(struct devi
 			     unsigned long arg)
 {
 	struct i2c_client *client = to_i2c_client(dev);
-	u8 value;
-	int ret = 0, err;
+	int ret;
 
 	switch (cmd) {
 	case RTC_VL_READ:
-		err = pcf8523_read(client, REG_CONTROL3, &value);
-		if (err < 0)
-			return err;
-
-		if (value & REG_CONTROL3_BLF)
-			ret = 1;
+		ret = pcf8523_voltage_low(client);
+		if (ret < 0)
+			return ret;
 
 		if (copy_to_user((void __user *)arg, &ret, sizeof(int)))
 			return -EFAULT;

[PATCH 4.9 090/117] ax25: fix inconsistent lock state in ax25_destroy_timer

[Greg Kroah-Hartman]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit d4d5d8e83c9616aeef28a2869cea49cc3fb35526 ]

Before thread in process context uses bh_lock_sock()
we must disable bh.

sysbot reported :

WARNING: inconsistent lock state
5.2.0-rc3+ #32 Not tainted

inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
blkid/26581 [HC0[0]:SC1[1]:HE1:SE0] takes:
00000000e0da85ee (slock-AF_AX25){+.?.}, at: spin_lock include/linux/spinlock.h:338 [inline]
00000000e0da85ee (slock-AF_AX25){+.?.}, at: ax25_destroy_timer+0x53/0xc0 net/ax25/af_ax25.c:275
{SOFTIRQ-ON-W} state was registered at:
  lock_acquire+0x16f/0x3f0 kernel/locking/lockdep.c:4303
  __raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline]
  _raw_spin_lock+0x2f/0x40 kernel/locking/spinlock.c:151
  spin_lock include/linux/spinlock.h:338 [inline]
  ax25_rt_autobind+0x3ca/0x720 net/ax25/ax25_route.c:429
  ax25_connect.cold+0x30/0xa4 net/ax25/af_ax25.c:1221
  __sys_connect+0x264/0x330 net/socket.c:1834
  __do_sys_connect net/socket.c:1845 [inline]
  __se_sys_connect net/socket.c:1842 [inline]
  __x64_sys_connect+0x73/0xb0 net/socket.c:1842
  do_syscall_64+0xfd/0x680 arch/x86/entry/common.c:301
  entry_SYSCALL_64_after_hwframe+0x49/0xbe
irq event stamp: 2272
hardirqs last  enabled at (2272): [<ffffffff810065f3>] trace_hardirqs_on_thunk+0x1a/0x1c
hardirqs last disabled at (2271): [<ffffffff8100660f>] trace_hardirqs_off_thunk+0x1a/0x1c
softirqs last  enabled at (1522): [<ffffffff87400654>] __do_softirq+0x654/0x94c kernel/softirq.c:320
softirqs last disabled at (2267): [<ffffffff81449010>] invoke_softirq kernel/softirq.c:374 [inline]
softirqs last disabled at (2267): [<ffffffff81449010>] irq_exit+0x180/0x1d0 kernel/softirq.c:414

other info that might help us debug this:
 Possible unsafe locking scenario:

       CPU0
       ----
  lock(slock-AF_AX25);
  <Interrupt>
    lock(slock-AF_AX25);

 *** DEADLOCK ***

1 lock held by blkid/26581:
 #0: 0000000010fd154d ((&ax25->dtimer)){+.-.}, at: lockdep_copy_map include/linux/lockdep.h:175 [inline]
 #0: 0000000010fd154d ((&ax25->dtimer)){+.-.}, at: call_timer_fn+0xe0/0x720 kernel/time/timer.c:1312

stack backtrace:
CPU: 1 PID: 26581 Comm: blkid Not tainted 5.2.0-rc3+ #32
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 <IRQ>
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x172/0x1f0 lib/dump_stack.c:113
 print_usage_bug.cold+0x393/0x4a2 kernel/locking/lockdep.c:2935
 valid_state kernel/locking/lockdep.c:2948 [inline]
 mark_lock_irq kernel/locking/lockdep.c:3138 [inline]
 mark_lock+0xd46/0x1370 kernel/locking/lockdep.c:3513
 mark_irqflags kernel/locking/lockdep.c:3391 [inline]
 __lock_acquire+0x159f/0x5490 kernel/locking/lockdep.c:3745
 lock_acquire+0x16f/0x3f0 kernel/locking/lockdep.c:4303
 __raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline]
 _raw_spin_lock+0x2f/0x40 kernel/locking/spinlock.c:151
 spin_lock include/linux/spinlock.h:338 [inline]
 ax25_destroy_timer+0x53/0xc0 net/ax25/af_ax25.c:275
 call_timer_fn+0x193/0x720 kernel/time/timer.c:1322
 expire_timers kernel/time/timer.c:1366 [inline]
 __run_timers kernel/time/timer.c:1685 [inline]
 __run_timers kernel/time/timer.c:1653 [inline]
 run_timer_softirq+0x66f/0x1740 kernel/time/timer.c:1698
 __do_softirq+0x25c/0x94c kernel/softirq.c:293
 invoke_softirq kernel/softirq.c:374 [inline]
 irq_exit+0x180/0x1d0 kernel/softirq.c:414
 exiting_irq arch/x86/include/asm/apic.h:536 [inline]
 smp_apic_timer_interrupt+0x13b/0x550 arch/x86/kernel/apic/apic.c:1068
 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:806
 </IRQ>
RIP: 0033:0x7f858d5c3232
Code: 8b 61 08 48 8b 84 24 d8 00 00 00 4c 89 44 24 28 48 8b ac 24 d0 00 00 00 4c 8b b4 24 e8 00 00 00 48 89 7c 24 68 48 89 4c 24 78 <48> 89 44 24 58 8b 84 24 e0 00 00 00 89 84 24 84 00 00 00 8b 84 24
RSP: 002b:00007ffcaf0cf5c0 EFLAGS: 00000206 ORIG_RAX: ffffffffffffff13
RAX: 00007f858d7d27a8 RBX: 00007f858d7d8820 RCX: 00007f858d3940d8
RDX: 00007ffcaf0cf798 RSI: 00000000f5e616f3 RDI: 00007f858d394fee
RBP: 0000000000000000 R08: 00007ffcaf0cf780 R09: 00007f858d7db480
R10: 0000000000000000 R11: 0000000009691a75 R12: 0000000000000005
R13: 00000000f5e616f3 R14: 0000000000000000 R15: 00007ffcaf0cf798

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ax25/ax25_route.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/net/ax25/ax25_route.c
+++ b/net/ax25/ax25_route.c
@@ -443,9 +443,11 @@ int ax25_rt_autobind(ax25_cb *ax25, ax25
 	}
 
 	if (ax25->sk != NULL) {
+		local_bh_disable();
 		bh_lock_sock(ax25->sk);
 		sock_reset_flag(ax25->sk, SOCK_ZAPPED);
 		bh_unlock_sock(ax25->sk);
+		local_bh_enable();
 	}
 
 put:

[PATCH 4.9 091/117] be2net: Fix number of Rx queues used for flow hashing

[Greg Kroah-Hartman]

From: Ivan Vecera <ivecera@redhat.com>

[ Upstream commit 718f4a2537089ea41903bf357071306163bc7c04 ]

Number of Rx queues used for flow hashing returned by the driver is
incorrect and this bug prevents user to use the last Rx queue in
indirection table.

Let's say we have a NIC with 6 combined queues:

[root@sm-03 ~]# ethtool -l enp4s0f0
Channel parameters for enp4s0f0:
Pre-set maximums:
RX:             5
TX:             5
Other:          0
Combined:       6
Current hardware settings:
RX:             0
TX:             0
Other:          0
Combined:       6

Default indirection table maps all (6) queues equally but the driver
reports only 5 rings available.

[root@sm-03 ~]# ethtool -x enp4s0f0
RX flow hash indirection table for enp4s0f0 with 5 RX ring(s):
    0:      0     1     2     3     4     5     0     1
    8:      2     3     4     5     0     1     2     3
   16:      4     5     0     1     2     3     4     5
   24:      0     1     2     3     4     5     0     1
...

Now change indirection table somehow:

[root@sm-03 ~]# ethtool -X enp4s0f0 weight 1 1
[root@sm-03 ~]# ethtool -x enp4s0f0
RX flow hash indirection table for enp4s0f0 with 6 RX ring(s):
    0:      0     0     0     0     0     0     0     0
...
   64:      1     1     1     1     1     1     1     1
...

Now it is not possible to change mapping back to equal (default) state:

[root@sm-03 ~]# ethtool -X enp4s0f0 equal 6
Cannot set RX flow hash configuration: Invalid argument

Fixes: 594ad54a2c3b ("be2net: Add support for setting and getting rx flow hash options")
Reported-by: Tianhao <tizhao@redhat.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/emulex/benet/be_ethtool.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/ethernet/emulex/benet/be_ethtool.c
+++ b/drivers/net/ethernet/emulex/benet/be_ethtool.c
@@ -1108,7 +1108,7 @@ static int be_get_rxnfc(struct net_devic
 		cmd->data = be_get_rss_hash_opts(adapter, cmd->flow_type);
 		break;
 	case ETHTOOL_GRXRINGS:
-		cmd->data = adapter->num_rx_qs - 1;
+		cmd->data = adapter->num_rx_qs;
 		break;
 	default:
 		return -EINVAL;

[PATCH 4.9 092/117] ipv6: flowlabel: fl6_sock_lookup() must use atomic_inc_not_zero

[Greg Kroah-Hartman]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 65a3c497c0e965a552008db8bc2653f62bc925a1 ]

Before taking a refcount, make sure the object is not already
scheduled for deletion.

Same fix is needed in ipv6_flowlabel_opt()

Fixes: 18367681a10b ("ipv6 flowlabel: Convert np->ipv6_fl_list to RCU.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv6/ip6_flowlabel.c |    7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

--- a/net/ipv6/ip6_flowlabel.c
+++ b/net/ipv6/ip6_flowlabel.c
@@ -254,9 +254,9 @@ struct ip6_flowlabel *fl6_sock_lookup(st
 	rcu_read_lock_bh();
 	for_each_sk_fl_rcu(np, sfl) {
 		struct ip6_flowlabel *fl = sfl->fl;
-		if (fl->label == label) {
+
+		if (fl->label == label && atomic_inc_not_zero(&fl->users)) {
 			fl->lastuse = jiffies;
-			atomic_inc(&fl->users);
 			rcu_read_unlock_bh();
 			return fl;
 		}
@@ -623,7 +623,8 @@ int ipv6_flowlabel_opt(struct sock *sk,
 						goto done;
 					}
 					fl1 = sfl->fl;
-					atomic_inc(&fl1->users);
+					if (!atomic_inc_not_zero(&fl1->users))
+						fl1 = NULL;
 					break;
 				}
 			}

[PATCH 4.9 093/117] lapb: fixed leak of control-blocks.

[Greg Kroah-Hartman]

From: Jeremy Sowden <jeremy@azazel.net>

[ Upstream commit 6be8e297f9bcea666ea85ac7a6cd9d52d6deaf92 ]

lapb_register calls lapb_create_cb, which initializes the control-
block's ref-count to one, and __lapb_insert_cb, which increments it when
adding the new block to the list of blocks.

lapb_unregister calls __lapb_remove_cb, which decrements the ref-count
when removing control-block from the list of blocks, and calls lapb_put
itself to decrement the ref-count before returning.

However, lapb_unregister also calls __lapb_devtostruct to look up the
right control-block for the given net_device, and __lapb_devtostruct
also bumps the ref-count, which means that when lapb_unregister returns
the ref-count is still 1 and the control-block is leaked.

Call lapb_put after __lapb_devtostruct to fix leak.

Reported-by: syzbot+afb980676c836b4a0afa@syzkaller.appspotmail.com
Signed-off-by: Jeremy Sowden <jeremy@azazel.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/lapb/lapb_iface.c |    1 +
 1 file changed, 1 insertion(+)

--- a/net/lapb/lapb_iface.c
+++ b/net/lapb/lapb_iface.c
@@ -182,6 +182,7 @@ int lapb_unregister(struct net_device *d
 	lapb = __lapb_devtostruct(dev);
 	if (!lapb)
 		goto out;
+	lapb_put(lapb);
 
 	lapb_stop_t1timer(lapb);
 	lapb_stop_t2timer(lapb);

[PATCH 4.9 094/117] neigh: fix use-after-free read in pneigh_get_next

[Greg Kroah-Hartman]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit f3e92cb8e2eb8c27d109e6fd73d3a69a8c09e288 ]

Nine years ago, I added RCU handling to neighbours, not pneighbours.
(pneigh are not commonly used)

Unfortunately I missed that /proc dump operations would use a
common entry and exit point : neigh_seq_start() and neigh_seq_stop()

We need to read_lock(tbl->lock) or risk use-after-free while
iterating the pneigh structures.

We might later convert pneigh to RCU and revert this patch.

sysbot reported :

BUG: KASAN: use-after-free in pneigh_get_next.isra.0+0x24b/0x280 net/core/neighbour.c:3158
Read of size 8 at addr ffff888097f2a700 by task syz-executor.0/9825

CPU: 1 PID: 9825 Comm: syz-executor.0 Not tainted 5.2.0-rc4+ #32
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x172/0x1f0 lib/dump_stack.c:113
 print_address_description.cold+0x7c/0x20d mm/kasan/report.c:188
 __kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317
 kasan_report+0x12/0x20 mm/kasan/common.c:614
 __asan_report_load8_noabort+0x14/0x20 mm/kasan/generic_report.c:132
 pneigh_get_next.isra.0+0x24b/0x280 net/core/neighbour.c:3158
 neigh_seq_next+0xdb/0x210 net/core/neighbour.c:3240
 seq_read+0x9cf/0x1110 fs/seq_file.c:258
 proc_reg_read+0x1fc/0x2c0 fs/proc/inode.c:221
 do_loop_readv_writev fs/read_write.c:714 [inline]
 do_loop_readv_writev fs/read_write.c:701 [inline]
 do_iter_read+0x4a4/0x660 fs/read_write.c:935
 vfs_readv+0xf0/0x160 fs/read_write.c:997
 kernel_readv fs/splice.c:359 [inline]
 default_file_splice_read+0x475/0x890 fs/splice.c:414
 do_splice_to+0x127/0x180 fs/splice.c:877
 splice_direct_to_actor+0x2d2/0x970 fs/splice.c:954
 do_splice_direct+0x1da/0x2a0 fs/splice.c:1063
 do_sendfile+0x597/0xd00 fs/read_write.c:1464
 __do_sys_sendfile64 fs/read_write.c:1525 [inline]
 __se_sys_sendfile64 fs/read_write.c:1511 [inline]
 __x64_sys_sendfile64+0x1dd/0x220 fs/read_write.c:1511
 do_syscall_64+0xfd/0x680 arch/x86/entry/common.c:301
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x4592c9
Code: fd b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 cb b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f4aab51dc78 EFLAGS: 00000246 ORIG_RAX: 0000000000000028
RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 00000000004592c9
RDX: 0000000000000000 RSI: 0000000000000004 RDI: 0000000000000005
RBP: 000000000075bf20 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000080000000 R11: 0000000000000246 R12: 00007f4aab51e6d4
R13: 00000000004c689d R14: 00000000004db828 R15: 00000000ffffffff

Allocated by task 9827:
 save_stack+0x23/0x90 mm/kasan/common.c:71
 set_track mm/kasan/common.c:79 [inline]
 __kasan_kmalloc mm/kasan/common.c:489 [inline]
 __kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:462
 kasan_kmalloc+0x9/0x10 mm/kasan/common.c:503
 __do_kmalloc mm/slab.c:3660 [inline]
 __kmalloc+0x15c/0x740 mm/slab.c:3669
 kmalloc include/linux/slab.h:552 [inline]
 pneigh_lookup+0x19c/0x4a0 net/core/neighbour.c:731
 arp_req_set_public net/ipv4/arp.c:1010 [inline]
 arp_req_set+0x613/0x720 net/ipv4/arp.c:1026
 arp_ioctl+0x652/0x7f0 net/ipv4/arp.c:1226
 inet_ioctl+0x2a0/0x340 net/ipv4/af_inet.c:926
 sock_do_ioctl+0xd8/0x2f0 net/socket.c:1043
 sock_ioctl+0x3ed/0x780 net/socket.c:1194
 vfs_ioctl fs/ioctl.c:46 [inline]
 file_ioctl fs/ioctl.c:509 [inline]
 do_vfs_ioctl+0xd5f/0x1380 fs/ioctl.c:696
 ksys_ioctl+0xab/0xd0 fs/ioctl.c:713
 __do_sys_ioctl fs/ioctl.c:720 [inline]
 __se_sys_ioctl fs/ioctl.c:718 [inline]
 __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:718
 do_syscall_64+0xfd/0x680 arch/x86/entry/common.c:301
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Freed by task 9824:
 save_stack+0x23/0x90 mm/kasan/common.c:71
 set_track mm/kasan/common.c:79 [inline]
 __kasan_slab_free+0x102/0x150 mm/kasan/common.c:451
 kasan_slab_free+0xe/0x10 mm/kasan/common.c:459
 __cache_free mm/slab.c:3432 [inline]
 kfree+0xcf/0x220 mm/slab.c:3755
 pneigh_ifdown_and_unlock net/core/neighbour.c:812 [inline]
 __neigh_ifdown+0x236/0x2f0 net/core/neighbour.c:356
 neigh_ifdown+0x20/0x30 net/core/neighbour.c:372
 arp_ifdown+0x1d/0x21 net/ipv4/arp.c:1274
 inetdev_destroy net/ipv4/devinet.c:319 [inline]
 inetdev_event+0xa14/0x11f0 net/ipv4/devinet.c:1544
 notifier_call_chain+0xc2/0x230 kernel/notifier.c:95
 __raw_notifier_call_chain kernel/notifier.c:396 [inline]
 raw_notifier_call_chain+0x2e/0x40 kernel/notifier.c:403
 call_netdevice_notifiers_info+0x3f/0x90 net/core/dev.c:1749
 call_netdevice_notifiers_extack net/core/dev.c:1761 [inline]
 call_netdevice_notifiers net/core/dev.c:1775 [inline]
 rollback_registered_many+0x9b9/0xfc0 net/core/dev.c:8178
 rollback_registered+0x109/0x1d0 net/core/dev.c:8220
 unregister_netdevice_queue net/core/dev.c:9267 [inline]
 unregister_netdevice_queue+0x1ee/0x2c0 net/core/dev.c:9260
 unregister_netdevice include/linux/netdevice.h:2631 [inline]
 __tun_detach+0xd8a/0x1040 drivers/net/tun.c:724
 tun_detach drivers/net/tun.c:741 [inline]
 tun_chr_close+0xe0/0x180 drivers/net/tun.c:3451
 __fput+0x2ff/0x890 fs/file_table.c:280
 ____fput+0x16/0x20 fs/file_table.c:313
 task_work_run+0x145/0x1c0 kernel/task_work.c:113
 tracehook_notify_resume include/linux/tracehook.h:185 [inline]
 exit_to_usermode_loop+0x273/0x2c0 arch/x86/entry/common.c:168
 prepare_exit_to_usermode arch/x86/entry/common.c:199 [inline]
 syscall_return_slowpath arch/x86/entry/common.c:279 [inline]
 do_syscall_64+0x58e/0x680 arch/x86/entry/common.c:304
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

The buggy address belongs to the object at ffff888097f2a700
 which belongs to the cache kmalloc-64 of size 64
The buggy address is located 0 bytes inside of
 64-byte region [ffff888097f2a700, ffff888097f2a740)
The buggy address belongs to the page:
page:ffffea00025fca80 refcount:1 mapcount:0 mapping:ffff8880aa400340 index:0x0
flags: 0x1fffc0000000200(slab)
raw: 01fffc0000000200 ffffea000250d548 ffffea00025726c8 ffff8880aa400340
raw: 0000000000000000 ffff888097f2a000 0000000100000020 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff888097f2a600: 00 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc
 ffff888097f2a680: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
>ffff888097f2a700: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
                   ^
 ffff888097f2a780: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
 ffff888097f2a800: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc

Fixes: 767e97e1e0db ("neigh: RCU conversion of struct neighbour")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/core/neighbour.c |    7 +++++++
 1 file changed, 7 insertions(+)

--- a/net/core/neighbour.c
+++ b/net/core/neighbour.c
@@ -2704,6 +2704,7 @@ static void *neigh_get_idx_any(struct se
 }
 
 void *neigh_seq_start(struct seq_file *seq, loff_t *pos, struct neigh_table *tbl, unsigned int neigh_seq_flags)
+	__acquires(tbl->lock)
 	__acquires(rcu_bh)
 {
 	struct neigh_seq_state *state = seq->private;
@@ -2714,6 +2715,7 @@ void *neigh_seq_start(struct seq_file *s
 
 	rcu_read_lock_bh();
 	state->nht = rcu_dereference_bh(tbl->nht);
+	read_lock(&tbl->lock);
 
 	return *pos ? neigh_get_idx_any(seq, pos) : SEQ_START_TOKEN;
 }
@@ -2747,8 +2749,13 @@ out:
 EXPORT_SYMBOL(neigh_seq_next);
 
 void neigh_seq_stop(struct seq_file *seq, void *v)
+	__releases(tbl->lock)
 	__releases(rcu_bh)
 {
+	struct neigh_seq_state *state = seq->private;
+	struct neigh_table *tbl = state->tbl;
+
+	read_unlock(&tbl->lock);
 	rcu_read_unlock_bh();
 }
 EXPORT_SYMBOL(neigh_seq_stop);

[PATCH 4.9 095/117] sunhv: Fix device naming inconsistency between sunhv_console and sunhv_reg

[Greg Kroah-Hartman]

From: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>

[ Upstream commit 07a6d63eb1b54b5fb38092780fe618dfe1d96e23 ]

In d5a2aa24, the name in struct console sunhv_console was changed from "ttyS"
to "ttyHV" while the name in struct uart_ops sunhv_pops remained unchanged.

This results in the hypervisor console device to be listed as "ttyHV0" under
/proc/consoles while the device node is still named "ttyS0":

root@osaka:~# cat /proc/consoles
ttyHV0               -W- (EC p  )    4:64
tty0                 -WU (E     )    4:1
root@osaka:~# readlink /sys/dev/char/4:64
../../devices/root/f02836f0/f0285690/tty/ttyS0
root@osaka:~#

This means that any userland code which tries to determine the name of the
device file of the hypervisor console device can not rely on the information
provided by /proc/consoles. In particular, booting current versions of debian-
installer inside a SPARC LDOM will fail with the installer unable to determine
the console device.

After renaming the device in struct uart_ops sunhv_pops to "ttyHV" as well,
the inconsistency is fixed and it is possible again to determine the name
of the device file of the hypervisor console device by reading the contents
of /proc/console:

root@osaka:~# cat /proc/consoles
ttyHV0               -W- (EC p  )    4:64
tty0                 -WU (E     )    4:1
root@osaka:~# readlink /sys/dev/char/4:64
../../devices/root/f02836f0/f0285690/tty/ttyHV0
root@osaka:~#

With this change, debian-installer works correctly when installing inside
a SPARC LDOM.

Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/sunhv.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/tty/serial/sunhv.c
+++ b/drivers/tty/serial/sunhv.c
@@ -392,7 +392,7 @@ static struct uart_ops sunhv_pops = {
 static struct uart_driver sunhv_reg = {
 	.owner			= THIS_MODULE,
 	.driver_name		= "sunhv",
-	.dev_name		= "ttyS",
+	.dev_name		= "ttyHV",
 	.major			= TTY_MAJOR,
 };
 

[PATCH 4.9 096/117] Revert "staging: vc04_services: prevent integer overflow in create_pagelist()"

[Greg Kroah-Hartman]

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This reverts commit cf07331c8827c9e9e0b4274c9b60204c18592241 which was
commit ca641bae6da977d638458e78cd1487b6160a2718 upstream.

Martin writes:
	This commit breaks the kernel build because the vchiq_pagelist_info
	struct is not defined in v4.9.182.

	It was only added in v4.10, in commit
	4807f2c0e684e907c501cb96049809d7a957dbc2.

Reported-by: Martin Weinelt <martin@linuxlounge.net>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/staging/vc04_services/interface/vchiq_arm/vchiq_2835_arm.c |    9 ---------
 1 file changed, 9 deletions(-)

--- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_2835_arm.c
+++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_2835_arm.c
@@ -381,18 +381,9 @@ create_pagelist(char __user *buf, size_t
 	int run, addridx, actual_pages;
         unsigned long *need_release;
 
-	if (count >= INT_MAX - PAGE_SIZE)
-		return NULL;
-
 	offset = (unsigned int)buf & (PAGE_SIZE - 1);
 	num_pages = (count + offset + PAGE_SIZE - 1) / PAGE_SIZE;
 
-	if (num_pages > (SIZE_MAX - sizeof(PAGELIST_T) -
-			 sizeof(struct vchiq_pagelist_info)) /
-			(sizeof(u32) + sizeof(pages[0]) +
-			 sizeof(struct scatterlist)))
-		return NULL;
-
 	*ppagelist = NULL;
 
 	/* Allocate enough storage to hold the page pointers and the page

[PATCH 4.9 097/117] perf/x86/intel/ds: Fix EVENT vs. UEVENT PEBS constraints

[Greg Kroah-Hartman]

[ Upstream commit 23e3983a466cd540ffdd2bbc6e0c51e31934f941 ]

This patch fixes an bug revealed by the following commit:

  6b89d4c1ae85 ("perf/x86/intel: Fix INTEL_FLAGS_EVENT_CONSTRAINT* masking")

That patch modified INTEL_FLAGS_EVENT_CONSTRAINT() to only look at the event code
when matching a constraint. If code+umask were needed, then the
INTEL_FLAGS_UEVENT_CONSTRAINT() macro was needed instead.
This broke with some of the constraints for PEBS events.

Several of them, including the one used for cycles:p, cycles:pp, cycles:ppp
fell in that category and caused the event to be rejected in PEBS mode.
In other words, on some platforms a cmdline such as:

  $ perf top -e cycles:pp

would fail with -EINVAL.

This patch fixes this bug by properly using INTEL_FLAGS_UEVENT_CONSTRAINT()
when needed in the PEBS constraint tables.

Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: kan.liang@intel.com
Link: http://lkml.kernel.org/r/20190521005246.423-1-eranian@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/events/intel/ds.c | 28 ++++++++++++++--------------
 1 file changed, 14 insertions(+), 14 deletions(-)

diff --git a/arch/x86/events/intel/ds.c b/arch/x86/events/intel/ds.c
index f26e26e4d84f..ad31c01f810f 100644
--- a/arch/x86/events/intel/ds.c
+++ b/arch/x86/events/intel/ds.c
@@ -655,7 +655,7 @@ struct event_constraint intel_core2_pebs_event_constraints[] = {
 	INTEL_FLAGS_UEVENT_CONSTRAINT(0x1fc7, 0x1), /* SIMD_INST_RETURED.ANY */
 	INTEL_FLAGS_EVENT_CONSTRAINT(0xcb, 0x1),    /* MEM_LOAD_RETIRED.* */
 	/* INST_RETIRED.ANY_P, inv=1, cmask=16 (cycles:p). */
-	INTEL_FLAGS_EVENT_CONSTRAINT(0x108000c0, 0x01),
+	INTEL_FLAGS_UEVENT_CONSTRAINT(0x108000c0, 0x01),
 	EVENT_CONSTRAINT_END
 };
 
@@ -664,7 +664,7 @@ struct event_constraint intel_atom_pebs_event_constraints[] = {
 	INTEL_FLAGS_UEVENT_CONSTRAINT(0x00c5, 0x1), /* MISPREDICTED_BRANCH_RETIRED */
 	INTEL_FLAGS_EVENT_CONSTRAINT(0xcb, 0x1),    /* MEM_LOAD_RETIRED.* */
 	/* INST_RETIRED.ANY_P, inv=1, cmask=16 (cycles:p). */
-	INTEL_FLAGS_EVENT_CONSTRAINT(0x108000c0, 0x01),
+	INTEL_FLAGS_UEVENT_CONSTRAINT(0x108000c0, 0x01),
 	/* Allow all events as PEBS with no flags */
 	INTEL_ALL_EVENT_CONSTRAINT(0, 0x1),
 	EVENT_CONSTRAINT_END
@@ -672,7 +672,7 @@ struct event_constraint intel_atom_pebs_event_constraints[] = {
 
 struct event_constraint intel_slm_pebs_event_constraints[] = {
 	/* INST_RETIRED.ANY_P, inv=1, cmask=16 (cycles:p). */
-	INTEL_FLAGS_EVENT_CONSTRAINT(0x108000c0, 0x1),
+	INTEL_FLAGS_UEVENT_CONSTRAINT(0x108000c0, 0x1),
 	/* Allow all events as PEBS with no flags */
 	INTEL_ALL_EVENT_CONSTRAINT(0, 0x1),
 	EVENT_CONSTRAINT_END
@@ -697,7 +697,7 @@ struct event_constraint intel_nehalem_pebs_event_constraints[] = {
 	INTEL_FLAGS_EVENT_CONSTRAINT(0xcb, 0xf),    /* MEM_LOAD_RETIRED.* */
 	INTEL_FLAGS_EVENT_CONSTRAINT(0xf7, 0xf),    /* FP_ASSIST.* */
 	/* INST_RETIRED.ANY_P, inv=1, cmask=16 (cycles:p). */
-	INTEL_FLAGS_EVENT_CONSTRAINT(0x108000c0, 0x0f),
+	INTEL_FLAGS_UEVENT_CONSTRAINT(0x108000c0, 0x0f),
 	EVENT_CONSTRAINT_END
 };
 
@@ -714,7 +714,7 @@ struct event_constraint intel_westmere_pebs_event_constraints[] = {
 	INTEL_FLAGS_EVENT_CONSTRAINT(0xcb, 0xf),    /* MEM_LOAD_RETIRED.* */
 	INTEL_FLAGS_EVENT_CONSTRAINT(0xf7, 0xf),    /* FP_ASSIST.* */
 	/* INST_RETIRED.ANY_P, inv=1, cmask=16 (cycles:p). */
-	INTEL_FLAGS_EVENT_CONSTRAINT(0x108000c0, 0x0f),
+	INTEL_FLAGS_UEVENT_CONSTRAINT(0x108000c0, 0x0f),
 	EVENT_CONSTRAINT_END
 };
 
@@ -723,7 +723,7 @@ struct event_constraint intel_snb_pebs_event_constraints[] = {
 	INTEL_PLD_CONSTRAINT(0x01cd, 0x8),    /* MEM_TRANS_RETIRED.LAT_ABOVE_THR */
 	INTEL_PST_CONSTRAINT(0x02cd, 0x8),    /* MEM_TRANS_RETIRED.PRECISE_STORES */
 	/* UOPS_RETIRED.ALL, inv=1, cmask=16 (cycles:p). */
-	INTEL_FLAGS_EVENT_CONSTRAINT(0x108001c2, 0xf),
+	INTEL_FLAGS_UEVENT_CONSTRAINT(0x108001c2, 0xf),
         INTEL_EXCLEVT_CONSTRAINT(0xd0, 0xf),    /* MEM_UOP_RETIRED.* */
         INTEL_EXCLEVT_CONSTRAINT(0xd1, 0xf),    /* MEM_LOAD_UOPS_RETIRED.* */
         INTEL_EXCLEVT_CONSTRAINT(0xd2, 0xf),    /* MEM_LOAD_UOPS_LLC_HIT_RETIRED.* */
@@ -738,9 +738,9 @@ struct event_constraint intel_ivb_pebs_event_constraints[] = {
         INTEL_PLD_CONSTRAINT(0x01cd, 0x8),    /* MEM_TRANS_RETIRED.LAT_ABOVE_THR */
 	INTEL_PST_CONSTRAINT(0x02cd, 0x8),    /* MEM_TRANS_RETIRED.PRECISE_STORES */
 	/* UOPS_RETIRED.ALL, inv=1, cmask=16 (cycles:p). */
-	INTEL_FLAGS_EVENT_CONSTRAINT(0x108001c2, 0xf),
+	INTEL_FLAGS_UEVENT_CONSTRAINT(0x108001c2, 0xf),
 	/* INST_RETIRED.PREC_DIST, inv=1, cmask=16 (cycles:ppp). */
-	INTEL_FLAGS_EVENT_CONSTRAINT(0x108001c0, 0x2),
+	INTEL_FLAGS_UEVENT_CONSTRAINT(0x108001c0, 0x2),
 	INTEL_EXCLEVT_CONSTRAINT(0xd0, 0xf),    /* MEM_UOP_RETIRED.* */
 	INTEL_EXCLEVT_CONSTRAINT(0xd1, 0xf),    /* MEM_LOAD_UOPS_RETIRED.* */
 	INTEL_EXCLEVT_CONSTRAINT(0xd2, 0xf),    /* MEM_LOAD_UOPS_LLC_HIT_RETIRED.* */
@@ -754,9 +754,9 @@ struct event_constraint intel_hsw_pebs_event_constraints[] = {
 	INTEL_FLAGS_UEVENT_CONSTRAINT(0x01c0, 0x2), /* INST_RETIRED.PRECDIST */
 	INTEL_PLD_CONSTRAINT(0x01cd, 0xf),    /* MEM_TRANS_RETIRED.* */
 	/* UOPS_RETIRED.ALL, inv=1, cmask=16 (cycles:p). */
-	INTEL_FLAGS_EVENT_CONSTRAINT(0x108001c2, 0xf),
+	INTEL_FLAGS_UEVENT_CONSTRAINT(0x108001c2, 0xf),
 	/* INST_RETIRED.PREC_DIST, inv=1, cmask=16 (cycles:ppp). */
-	INTEL_FLAGS_EVENT_CONSTRAINT(0x108001c0, 0x2),
+	INTEL_FLAGS_UEVENT_CONSTRAINT(0x108001c0, 0x2),
 	INTEL_FLAGS_UEVENT_CONSTRAINT_DATALA_NA(0x01c2, 0xf), /* UOPS_RETIRED.ALL */
 	INTEL_FLAGS_UEVENT_CONSTRAINT_DATALA_XLD(0x11d0, 0xf), /* MEM_UOPS_RETIRED.STLB_MISS_LOADS */
 	INTEL_FLAGS_UEVENT_CONSTRAINT_DATALA_XLD(0x21d0, 0xf), /* MEM_UOPS_RETIRED.LOCK_LOADS */
@@ -777,9 +777,9 @@ struct event_constraint intel_bdw_pebs_event_constraints[] = {
 	INTEL_FLAGS_UEVENT_CONSTRAINT(0x01c0, 0x2), /* INST_RETIRED.PRECDIST */
 	INTEL_PLD_CONSTRAINT(0x01cd, 0xf),    /* MEM_TRANS_RETIRED.* */
 	/* UOPS_RETIRED.ALL, inv=1, cmask=16 (cycles:p). */
-	INTEL_FLAGS_EVENT_CONSTRAINT(0x108001c2, 0xf),
+	INTEL_FLAGS_UEVENT_CONSTRAINT(0x108001c2, 0xf),
 	/* INST_RETIRED.PREC_DIST, inv=1, cmask=16 (cycles:ppp). */
-	INTEL_FLAGS_EVENT_CONSTRAINT(0x108001c0, 0x2),
+	INTEL_FLAGS_UEVENT_CONSTRAINT(0x108001c0, 0x2),
 	INTEL_FLAGS_UEVENT_CONSTRAINT_DATALA_NA(0x01c2, 0xf), /* UOPS_RETIRED.ALL */
 	INTEL_FLAGS_UEVENT_CONSTRAINT_DATALA_LD(0x11d0, 0xf), /* MEM_UOPS_RETIRED.STLB_MISS_LOADS */
 	INTEL_FLAGS_UEVENT_CONSTRAINT_DATALA_LD(0x21d0, 0xf), /* MEM_UOPS_RETIRED.LOCK_LOADS */
@@ -800,9 +800,9 @@ struct event_constraint intel_bdw_pebs_event_constraints[] = {
 struct event_constraint intel_skl_pebs_event_constraints[] = {
 	INTEL_FLAGS_UEVENT_CONSTRAINT(0x1c0, 0x2),	/* INST_RETIRED.PREC_DIST */
 	/* INST_RETIRED.PREC_DIST, inv=1, cmask=16 (cycles:ppp). */
-	INTEL_FLAGS_EVENT_CONSTRAINT(0x108001c0, 0x2),
+	INTEL_FLAGS_UEVENT_CONSTRAINT(0x108001c0, 0x2),
 	/* INST_RETIRED.TOTAL_CYCLES_PS (inv=1, cmask=16) (cycles:p). */
-	INTEL_FLAGS_EVENT_CONSTRAINT(0x108000c0, 0x0f),
+	INTEL_FLAGS_UEVENT_CONSTRAINT(0x108000c0, 0x0f),
 	INTEL_PLD_CONSTRAINT(0x1cd, 0xf),		      /* MEM_TRANS_RETIRED.* */
 	INTEL_FLAGS_UEVENT_CONSTRAINT_DATALA_LD(0x11d0, 0xf), /* MEM_INST_RETIRED.STLB_MISS_LOADS */
 	INTEL_FLAGS_UEVENT_CONSTRAINT_DATALA_ST(0x12d0, 0xf), /* MEM_INST_RETIRED.STLB_MISS_STORES */
-- 
2.20.1

[PATCH 4.9 098/117] selftests: netfilter: missing error check when setting up veth interface

[Greg Kroah-Hartman]

[ Upstream commit 82ce6eb1dd13fd12e449b2ee2c2ec051e6f52c43 ]

A test for the basic NAT functionality uses ip command which needs veth
device. There is a condition where the kernel support for veth is not
compiled into the kernel and the test script breaks. This patch contains
code for reasonable error display and correct code exit.

Signed-off-by: Jeffrin Jose T <jeffrin@rajagiritech.edu.in>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/netfilter/nft_nat.sh | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/tools/testing/selftests/netfilter/nft_nat.sh b/tools/testing/selftests/netfilter/nft_nat.sh
index 8ec76681605c..f25f72a75cf3 100755
--- a/tools/testing/selftests/netfilter/nft_nat.sh
+++ b/tools/testing/selftests/netfilter/nft_nat.sh
@@ -23,7 +23,11 @@ ip netns add ns0
 ip netns add ns1
 ip netns add ns2
 
-ip link add veth0 netns ns0 type veth peer name eth0 netns ns1
+ip link add veth0 netns ns0 type veth peer name eth0 netns ns1 > /dev/null 2>&1
+if [ $? -ne 0 ];then
+    echo "SKIP: No virtual ethernet pair device support in kernel"
+    exit $ksft_skip
+fi
 ip link add veth1 netns ns0 type veth peer name eth0 netns ns2
 
 ip -net ns0 link set lo up
-- 
2.20.1

[PATCH 4.9 099/117] mISDN: make sure device name is NUL terminated

[Greg Kroah-Hartman]

[ Upstream commit ccfb62f27beb295103e9392462b20a6ed807d0ea ]

The user can change the device_name with the IMSETDEVNAME ioctl, but we
need to ensure that the user's name is NUL terminated.  Otherwise it
could result in a buffer overflow when we copy the name back to the user
with IMGETDEVINFO ioctl.

I also changed two strcpy() calls which handle the name to strscpy().
Hopefully, there aren't any other ways to create a too long name, but
it's nice to do this as a kernel hardening measure.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/isdn/mISDN/socket.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/isdn/mISDN/socket.c b/drivers/isdn/mISDN/socket.c
index f96b8f2bdf74..d7c986fb0b3b 100644
--- a/drivers/isdn/mISDN/socket.c
+++ b/drivers/isdn/mISDN/socket.c
@@ -394,7 +394,7 @@ data_sock_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg)
 			memcpy(di.channelmap, dev->channelmap,
 			       sizeof(di.channelmap));
 			di.nrbchan = dev->nrbchan;
-			strcpy(di.name, dev_name(&dev->dev));
+			strscpy(di.name, dev_name(&dev->dev), sizeof(di.name));
 			if (copy_to_user((void __user *)arg, &di, sizeof(di)))
 				err = -EFAULT;
 		} else
@@ -678,7 +678,7 @@ base_sock_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg)
 			memcpy(di.channelmap, dev->channelmap,
 			       sizeof(di.channelmap));
 			di.nrbchan = dev->nrbchan;
-			strcpy(di.name, dev_name(&dev->dev));
+			strscpy(di.name, dev_name(&dev->dev), sizeof(di.name));
 			if (copy_to_user((void __user *)arg, &di, sizeof(di)))
 				err = -EFAULT;
 		} else
@@ -692,6 +692,7 @@ base_sock_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg)
 			err = -EFAULT;
 			break;
 		}
+		dn.name[sizeof(dn.name) - 1] = '\0';
 		dev = get_mdevice(dn.id);
 		if (dev)
 			err = device_rename(&dev->dev, dn.name);
-- 
2.20.1

[PATCH 4.9 100/117] x86/CPU/AMD: Dont force the CPB cap when running under a hypervisor

[Greg Kroah-Hartman]

[ Upstream commit 2ac44ab608705948564791ce1d15d43ba81a1e38 ]

For F17h AMD CPUs, the CPB capability ('Core Performance Boost') is forcibly set,
because some versions of that chip incorrectly report that they do not have it.

However, a hypervisor may filter out the CPB capability, for good
reasons. For example, KVM currently does not emulate setting the CPB
bit in MSR_K7_HWCR, and unchecked MSR access errors will be thrown
when trying to set it as a guest:

	unchecked MSR access error: WRMSR to 0xc0010015 (tried to write 0x0000000001000011) at rIP: 0xffffffff890638f4 (native_write_msr+0x4/0x20)

	Call Trace:
	boost_set_msr+0x50/0x80 [acpi_cpufreq]
	cpuhp_invoke_callback+0x86/0x560
	sort_range+0x20/0x20
	cpuhp_thread_fun+0xb0/0x110
	smpboot_thread_fn+0xef/0x160
	kthread+0x113/0x130
	kthread_create_worker_on_cpu+0x70/0x70
	ret_from_fork+0x35/0x40

To avoid this issue, don't forcibly set the CPB capability for a CPU
when running under a hypervisor.

Signed-off-by: Frank van der Linden <fllinden@amazon.com>
Acked-by: Borislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: bp@alien8.de
Cc: jiaxun.yang@flygoat.com
Fixes: 0237199186e7 ("x86/CPU/AMD: Set the CPB bit unconditionally on F17h")
Link: http://lkml.kernel.org/r/20190522221745.GA15789@dev-dsk-fllinden-2c-c1893d73.us-west-2.amazon.com
[ Minor edits to the changelog. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kernel/cpu/amd.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c
index be6d0543e626..52a65f14db06 100644
--- a/arch/x86/kernel/cpu/amd.c
+++ b/arch/x86/kernel/cpu/amd.c
@@ -766,8 +766,11 @@ static void init_amd_zn(struct cpuinfo_x86 *c)
 {
 	set_cpu_cap(c, X86_FEATURE_ZEN);
 
-	/* Fix erratum 1076: CPB feature bit not being set in CPUID. */
-	if (!cpu_has(c, X86_FEATURE_CPB))
+	/*
+	 * Fix erratum 1076: CPB feature bit not being set in CPUID.
+	 * Always set it, except when running under a hypervisor.
+	 */
+	if (!cpu_has(c, X86_FEATURE_HYPERVISOR) && !cpu_has(c, X86_FEATURE_CPB))
 		set_cpu_cap(c, X86_FEATURE_CPB);
 }
 
-- 
2.20.1

[PATCH 4.9 101/117] perf/ring_buffer: Fix exposing a temporarily decreased data_head

[Greg Kroah-Hartman]

[ Upstream commit 1b038c6e05ff70a1e66e3e571c2e6106bdb75f53 ]

In perf_output_put_handle(), an IRQ/NMI can happen in below location and
write records to the same ring buffer:

	...
	local_dec_and_test(&rb->nest)
	...                          <-- an IRQ/NMI can happen here
	rb->user_page->data_head = head;
	...

In this case, a value A is written to data_head in the IRQ, then a value
B is written to data_head after the IRQ. And A > B. As a result,
data_head is temporarily decreased from A to B. And a reader may see
data_head < data_tail if it read the buffer frequently enough, which
creates unexpected behaviors.

This can be fixed by moving dec(&rb->nest) to after updating data_head,
which prevents the IRQ/NMI above from updating data_head.

[ Split up by peterz. ]

Signed-off-by: Yabin Cui <yabinc@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: mark.rutland@arm.com
Fixes: ef60777c9abd ("perf: Optimize the perf_output() path by removing IRQ-disables")
Link: http://lkml.kernel.org/r/20190517115418.224478157@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/events/ring_buffer.c | 24 ++++++++++++++++++++----
 1 file changed, 20 insertions(+), 4 deletions(-)

diff --git a/kernel/events/ring_buffer.c b/kernel/events/ring_buffer.c
index 99becab2c1ce..524744a38d61 100644
--- a/kernel/events/ring_buffer.c
+++ b/kernel/events/ring_buffer.c
@@ -52,11 +52,18 @@ static void perf_output_put_handle(struct perf_output_handle *handle)
 	head = local_read(&rb->head);
 
 	/*
-	 * IRQ/NMI can happen here, which means we can miss a head update.
+	 * IRQ/NMI can happen here and advance @rb->head, causing our
+	 * load above to be stale.
 	 */
 
-	if (!local_dec_and_test(&rb->nest))
+	/*
+	 * If this isn't the outermost nesting, we don't have to update
+	 * @rb->user_page->data_head.
+	 */
+	if (local_read(&rb->nest) > 1) {
+		local_dec(&rb->nest);
 		goto out;
+	}
 
 	/*
 	 * Since the mmap() consumer (userspace) can run on a different CPU:
@@ -88,9 +95,18 @@ static void perf_output_put_handle(struct perf_output_handle *handle)
 	rb->user_page->data_head = head;
 
 	/*
-	 * Now check if we missed an update -- rely on previous implied
-	 * compiler barriers to force a re-read.
+	 * We must publish the head before decrementing the nest count,
+	 * otherwise an IRQ/NMI can publish a more recent head value and our
+	 * write will (temporarily) publish a stale value.
+	 */
+	barrier();
+	local_set(&rb->nest, 0);
+
+	/*
+	 * Ensure we decrement @rb->nest before we validate the @rb->head.
+	 * Otherwise we cannot be sure we caught the 'last' nested update.
 	 */
+	barrier();
 	if (unlikely(head != local_read(&rb->head))) {
 		local_inc(&rb->nest);
 		goto again;
-- 
2.20.1

[PATCH 4.9 102/117] perf/ring_buffer: Add ordering to rb->nest increment

[Greg Kroah-Hartman]

[ Upstream commit 3f9fbe9bd86c534eba2faf5d840fd44c6049f50e ]

Similar to how decrementing rb->next too early can cause data_head to
(temporarily) be observed to go backward, so too can this happen when
we increment too late.

This barrier() ensures the rb->head load happens after the increment,
both the one in the 'goto again' path, as the one from
perf_output_get_handle() -- albeit very unlikely to matter for the
latter.

Suggested-by: Yabin Cui <yabinc@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: acme@kernel.org
Cc: mark.rutland@arm.com
Cc: namhyung@kernel.org
Fixes: ef60777c9abd ("perf: Optimize the perf_output() path by removing IRQ-disables")
Link: http://lkml.kernel.org/r/20190517115418.309516009@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/events/ring_buffer.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/kernel/events/ring_buffer.c b/kernel/events/ring_buffer.c
index 524744a38d61..8e8b903b7613 100644
--- a/kernel/events/ring_buffer.c
+++ b/kernel/events/ring_buffer.c
@@ -49,6 +49,15 @@ static void perf_output_put_handle(struct perf_output_handle *handle)
 	unsigned long head;
 
 again:
+	/*
+	 * In order to avoid publishing a head value that goes backwards,
+	 * we must ensure the load of @rb->head happens after we've
+	 * incremented @rb->nest.
+	 *
+	 * Otherwise we can observe a @rb->head value before one published
+	 * by an IRQ/NMI happening between the load and the increment.
+	 */
+	barrier();
 	head = local_read(&rb->head);
 
 	/*
-- 
2.20.1

[PATCH 4.9 103/117] gpio: fix gpio-adp5588 build errors

[Greg Kroah-Hartman]

[ Upstream commit e9646f0f5bb62b7d43f0968f39d536cfe7123b53 ]

The gpio-adp5588 driver uses interfaces that are provided by
GPIOLIB_IRQCHIP, so select that symbol in its Kconfig entry.

Fixes these build errors:

../drivers/gpio/gpio-adp5588.c: In function ‘adp5588_irq_handler’:
../drivers/gpio/gpio-adp5588.c:266:26: error: ‘struct gpio_chip’ has no member named ‘irq’
            dev->gpio_chip.irq.domain, gpio));
                          ^
../drivers/gpio/gpio-adp5588.c: In function ‘adp5588_irq_setup’:
../drivers/gpio/gpio-adp5588.c:298:2: error: implicit declaration of function ‘gpiochip_irqchip_add_nested’ [-Werror=implicit-function-declaration]
  ret = gpiochip_irqchip_add_nested(&dev->gpio_chip,
  ^
../drivers/gpio/gpio-adp5588.c:307:2: error: implicit declaration of function ‘gpiochip_set_nested_irqchip’ [-Werror=implicit-function-declaration]
  gpiochip_set_nested_irqchip(&dev->gpio_chip,
  ^

Fixes: 459773ae8dbb ("gpio: adp5588-gpio: support interrupt controller")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: linux-gpio@vger.kernel.org
Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpio/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 12d417a4d4a8..b992badb99dd 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -670,6 +670,7 @@ config GPIO_ADP5588
 config GPIO_ADP5588_IRQ
 	bool "Interrupt controller support for ADP5588"
 	depends on GPIO_ADP5588=y
+	select GPIOLIB_IRQCHIP
 	help
 	  Say yes here to enable the adp5588 to be used as an interrupt
 	  controller. It requires the driver to be built in the kernel.
-- 
2.20.1

[PATCH 4.9 104/117] net: tulip: de4x5: Drop redundant MODULE_DEVICE_TABLE()

[Greg Kroah-Hartman]

[ Upstream commit 3e66b7cc50ef921121babc91487e1fb98af1ba6e ]

Building with Clang reports the redundant use of MODULE_DEVICE_TABLE():

drivers/net/ethernet/dec/tulip/de4x5.c:2110:1: error: redefinition of '__mod_eisa__de4x5_eisa_ids_device_table'
MODULE_DEVICE_TABLE(eisa, de4x5_eisa_ids);
^
./include/linux/module.h:229:21: note: expanded from macro 'MODULE_DEVICE_TABLE'
extern typeof(name) __mod_##type##__##name##_device_table               \
                    ^
<scratch space>:90:1: note: expanded from here
__mod_eisa__de4x5_eisa_ids_device_table
^
drivers/net/ethernet/dec/tulip/de4x5.c:2100:1: note: previous definition is here
MODULE_DEVICE_TABLE(eisa, de4x5_eisa_ids);
^
./include/linux/module.h:229:21: note: expanded from macro 'MODULE_DEVICE_TABLE'
extern typeof(name) __mod_##type##__##name##_device_table               \
                    ^
<scratch space>:85:1: note: expanded from here
__mod_eisa__de4x5_eisa_ids_device_table
^

This drops the one further from the table definition to match the common
use of MODULE_DEVICE_TABLE().

Fixes: 07563c711fbc ("EISA bus MODALIAS attributes support")
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/dec/tulip/de4x5.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/net/ethernet/dec/tulip/de4x5.c b/drivers/net/ethernet/dec/tulip/de4x5.c
index 6620fc861c47..005c79b5b3f0 100644
--- a/drivers/net/ethernet/dec/tulip/de4x5.c
+++ b/drivers/net/ethernet/dec/tulip/de4x5.c
@@ -2109,7 +2109,6 @@ static struct eisa_driver de4x5_eisa_driver = {
 		.remove  = de4x5_eisa_remove,
         }
 };
-MODULE_DEVICE_TABLE(eisa, de4x5_eisa_ids);
 #endif
 
 #ifdef CONFIG_PCI
-- 
2.20.1

[PATCH 4.9 105/117] i2c: dev: fix potential memory leak in i2cdev_ioctl_rdwr

[Greg Kroah-Hartman]

[ Upstream commit a0692f0eef91354b62c2b4c94954536536be5425 ]

If I2C_M_RECV_LEN check failed, msgs[i].buf allocated by memdup_user
will not be freed. Pump index up so it will be freed.

Fixes: 838bfa6049fb ("i2c-dev: Add support for I2C_M_RECV_LEN")
Signed-off-by: Yingjoe Chen <yingjoe.chen@mediatek.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/i2c/i2c-dev.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/i2c/i2c-dev.c b/drivers/i2c/i2c-dev.c
index 00e8e675cbeb..eaa312bc3a3c 100644
--- a/drivers/i2c/i2c-dev.c
+++ b/drivers/i2c/i2c-dev.c
@@ -297,6 +297,7 @@ static noinline int i2cdev_ioctl_rdwr(struct i2c_client *client,
 			    rdwr_pa[i].buf[0] < 1 ||
 			    rdwr_pa[i].len < rdwr_pa[i].buf[0] +
 					     I2C_SMBUS_BLOCK_MAX) {
+				i++;
 				res = -EINVAL;
 				break;
 			}
-- 
2.20.1

[PATCH 4.9 106/117] configfs: Fix use-after-free when accessing sd->s_dentry

[Greg Kroah-Hartman]

[ Upstream commit f6122ed2a4f9c9c1c073ddf6308d1b2ac10e0781 ]

In the vfs_statx() context, during path lookup, the dentry gets
added to sd->s_dentry via configfs_attach_attr(). In the end,
vfs_statx() kills the dentry by calling path_put(), which invokes
configfs_d_iput(). Ideally, this dentry must be removed from
sd->s_dentry but it doesn't if the sd->s_count >= 3. As a result,
sd->s_dentry is holding reference to a stale dentry pointer whose
memory is already freed up. This results in use-after-free issue,
when this stale sd->s_dentry is accessed later in
configfs_readdir() path.

This issue can be easily reproduced, by running the LTP test case -
sh fs_racer_file_list.sh /config
(https://github.com/linux-test-project/ltp/blob/master/testcases/kernel/fs/racer/fs_racer_file_list.sh)

Fixes: 76ae281f6307 ('configfs: fix race between dentry put and lookup')
Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/configfs/dir.c | 14 ++++++--------
 1 file changed, 6 insertions(+), 8 deletions(-)

diff --git a/fs/configfs/dir.c b/fs/configfs/dir.c
index d7955dc56737..a1985a9ad2d6 100644
--- a/fs/configfs/dir.c
+++ b/fs/configfs/dir.c
@@ -58,15 +58,13 @@ static void configfs_d_iput(struct dentry * dentry,
 	if (sd) {
 		/* Coordinate with configfs_readdir */
 		spin_lock(&configfs_dirent_lock);
-		/* Coordinate with configfs_attach_attr where will increase
-		 * sd->s_count and update sd->s_dentry to new allocated one.
-		 * Only set sd->dentry to null when this dentry is the only
-		 * sd owner.
-		 * If not do so, configfs_d_iput may run just after
-		 * configfs_attach_attr and set sd->s_dentry to null
-		 * even it's still in use.
+		/*
+		 * Set sd->s_dentry to null only when this dentry is the one
+		 * that is going to be killed.  Otherwise configfs_d_iput may
+		 * run just after configfs_attach_attr and set sd->s_dentry to
+		 * NULL even it's still in use.
 		 */
-		if (atomic_read(&sd->s_count) <= 2)
+		if (sd->s_dentry == dentry)
 			sd->s_dentry = NULL;
 
 		spin_unlock(&configfs_dirent_lock);
-- 
2.20.1

[PATCH 4.9 107/117] perf data: Fix strncat may truncate build failure with recent gcc

[Greg Kroah-Hartman]

[ Upstream commit 97acec7df172cd1e450f81f5e293c0aa145a2797 ]

This strncat() is safe because the buffer was allocated with zalloc(),
however gcc doesn't know that. Since the string always has 4 non-null
bytes, just use memcpy() here.

    CC       /home/shawn/linux/tools/perf/util/data-convert-bt.o
  In file included from /usr/include/string.h:494,
                   from /home/shawn/linux/tools/lib/traceevent/event-parse.h:27,
                   from util/data-convert-bt.c:22:
  In function ‘strncat’,
      inlined from ‘string_set_value’ at util/data-convert-bt.c:274:4:
  /usr/include/powerpc64le-linux-gnu/bits/string_fortified.h:136:10: error: ‘__builtin_strncat’ output may be truncated copying 4 bytes from a string of length 4 [-Werror=stringop-truncation]
    136 |   return __builtin___strncat_chk (__dest, __src, __len, __bos (__dest));
        |          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Signed-off-by: Shawn Landden <shawn@git.icu>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
LPU-Reference: 20190518183238.10954-1-shawn@git.icu
Link: https://lkml.kernel.org/n/tip-289f1jice17ta7tr3tstm9jm@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/util/data-convert-bt.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/perf/util/data-convert-bt.c b/tools/perf/util/data-convert-bt.c
index 7123f4de32cc..226f4312b8f3 100644
--- a/tools/perf/util/data-convert-bt.c
+++ b/tools/perf/util/data-convert-bt.c
@@ -265,7 +265,7 @@ static int string_set_value(struct bt_ctf_field *field, const char *string)
 				if (i > 0)
 					strncpy(buffer, string, i);
 			}
-			strncat(buffer + p, numstr, 4);
+			memcpy(buffer + p, numstr, 4);
 			p += 3;
 		}
 	}
-- 
2.20.1

[PATCH 4.9 108/117] perf record: Fix s390 missing module symbol and warning for non-root users

[Greg Kroah-Hartman]

[ Upstream commit 6738028dd57df064b969d8392c943ef3b3ae705d ]

Command 'perf record' and 'perf report' on a system without kernel
debuginfo packages uses /proc/kallsyms and /proc/modules to find
addresses for kernel and module symbols. On x86 this works for root and
non-root users.

On s390, when invoked as non-root user, many of the following warnings
are shown and module symbols are missing:

    proc/{kallsyms,modules} inconsistency while looking for
        "[sha1_s390]" module!

Command 'perf record' creates a list of module start addresses by
parsing the output of /proc/modules and creates a PERF_RECORD_MMAP
record for the kernel and each module. The following function call
sequence is executed:

  machine__create_kernel_maps
    machine__create_module
      modules__parse
        machine__create_module --> for each line in /proc/modules
          arch__fix_module_text_start

Function arch__fix_module_text_start() is s390 specific. It opens
file /sys/module/<name>/sections/.text to extract the module's .text
section start address. On s390 the module loader prepends a header
before the first section, whereas on x86 the module's text section
address is identical the the module's load address.

However module section files are root readable only. For non-root the
read operation fails and machine__create_module() returns an error.
Command perf record does not generate any PERF_RECORD_MMAP record
for loaded modules. Later command perf report complains about missing
module maps.

To fix this function arch__fix_module_text_start() always returns
success. For root users there is no change, for non-root users
the module's load address is used as module's text start address
(the prepended header then counts as part of the text section).

This enable non-root users to use module symbols and avoid the
warning when perf report is executed.

Output before:

  [tmricht@m83lp54 perf]$ ./perf report -D | fgrep MMAP
  0 0x168 [0x50]: PERF_RECORD_MMAP ... x [kernel.kallsyms]_text

Output after:

  [tmricht@m83lp54 perf]$ ./perf report -D | fgrep MMAP
  0 0x168 [0x50]: PERF_RECORD_MMAP ... x [kernel.kallsyms]_text
  0 0x1b8 [0x98]: PERF_RECORD_MMAP ... x /lib/modules/.../autofs4.ko.xz
  0 0x250 [0xa8]: PERF_RECORD_MMAP ... x /lib/modules/.../sha_common.ko.xz
  0 0x2f8 [0x98]: PERF_RECORD_MMAP ... x /lib/modules/.../des_generic.ko.xz

Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Link: http://lkml.kernel.org/r/20190522144601.50763-4-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/arch/s390/util/machine.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/tools/perf/arch/s390/util/machine.c b/tools/perf/arch/s390/util/machine.c
index b9a95a1a8e69..d3d1452021d4 100644
--- a/tools/perf/arch/s390/util/machine.c
+++ b/tools/perf/arch/s390/util/machine.c
@@ -4,16 +4,19 @@
 #include "util.h"
 #include "machine.h"
 #include "api/fs/fs.h"
+#include "debug.h"
 
 int arch__fix_module_text_start(u64 *start, const char *name)
 {
+	u64 m_start = *start;
 	char path[PATH_MAX];
 
 	snprintf(path, PATH_MAX, "module/%.*s/sections/.text",
 				(int)strlen(name) - 2, name + 1);
-
-	if (sysfs__read_ull(path, (unsigned long long *)start) < 0)
-		return -1;
+	if (sysfs__read_ull(path, (unsigned long long *)start) < 0) {
+		pr_debug2("Using module %s start:%#lx\n", path, m_start);
+		*start = m_start;
+	}
 
 	return 0;
 }
-- 
2.20.1

[PATCH 4.9 109/117] ia64: fix build errors by exporting paddr_to_nid()

[Greg Kroah-Hartman]

[ Upstream commit 9a626c4a6326da4433a0d4d4a8a7d1571caf1ed3 ]

Fix build errors on ia64 when DISCONTIGMEM=y and NUMA=y by
exporting paddr_to_nid().

Fixes these build errors:

ERROR: "paddr_to_nid" [sound/core/snd-pcm.ko] undefined!
ERROR: "paddr_to_nid" [net/sunrpc/sunrpc.ko] undefined!
ERROR: "paddr_to_nid" [fs/cifs/cifs.ko] undefined!
ERROR: "paddr_to_nid" [drivers/video/fbdev/core/fb.ko] undefined!
ERROR: "paddr_to_nid" [drivers/usb/mon/usbmon.ko] undefined!
ERROR: "paddr_to_nid" [drivers/usb/core/usbcore.ko] undefined!
ERROR: "paddr_to_nid" [drivers/md/raid1.ko] undefined!
ERROR: "paddr_to_nid" [drivers/md/dm-mod.ko] undefined!
ERROR: "paddr_to_nid" [drivers/md/dm-crypt.ko] undefined!
ERROR: "paddr_to_nid" [drivers/md/dm-bufio.ko] undefined!
ERROR: "paddr_to_nid" [drivers/ide/ide-core.ko] undefined!
ERROR: "paddr_to_nid" [drivers/ide/ide-cd_mod.ko] undefined!
ERROR: "paddr_to_nid" [drivers/gpu/drm/drm.ko] undefined!
ERROR: "paddr_to_nid" [drivers/char/agp/agpgart.ko] undefined!
ERROR: "paddr_to_nid" [drivers/block/nbd.ko] undefined!
ERROR: "paddr_to_nid" [drivers/block/loop.ko] undefined!
ERROR: "paddr_to_nid" [drivers/block/brd.ko] undefined!
ERROR: "paddr_to_nid" [crypto/ccm.ko] undefined!

Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: linux-ia64@vger.kernel.org
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/ia64/mm/numa.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/ia64/mm/numa.c b/arch/ia64/mm/numa.c
index aa19b7ac8222..476c7b4be378 100644
--- a/arch/ia64/mm/numa.c
+++ b/arch/ia64/mm/numa.c
@@ -49,6 +49,7 @@ paddr_to_nid(unsigned long paddr)
 
 	return (i < num_node_memblks) ? node_memblk[i].nid : (num_node_memblks ? -1 : 0);
 }
+EXPORT_SYMBOL(paddr_to_nid);
 
 #if defined(CONFIG_SPARSEMEM) && defined(CONFIG_NUMA)
 /*
-- 
2.20.1

[PATCH 4.9 110/117] KVM: PPC: Book3S: Use new mutex to synchronize access to rtas token list

[Greg Kroah-Hartman]

[ Upstream commit 1659e27d2bc1ef47b6d031abe01b467f18cb72d9 ]

Currently the Book 3S KVM code uses kvm->lock to synchronize access
to the kvm->arch.rtas_tokens list.  Because this list is scanned
inside kvmppc_rtas_hcall(), which is called with the vcpu mutex held,
taking kvm->lock cause a lock inversion problem, which could lead to
a deadlock.

To fix this, we add a new mutex, kvm->arch.rtas_token_lock, which nests
inside the vcpu mutexes, and use that instead of kvm->lock when
accessing the rtas token list.

This removes the lockdep_assert_held() in kvmppc_rtas_tokens_free().
At this point we don't hold the new mutex, but that is OK because
kvmppc_rtas_tokens_free() is only called when the whole VM is being
destroyed, and at that point nothing can be looking up a token in
the list.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/include/asm/kvm_host.h |  1 +
 arch/powerpc/kvm/book3s.c           |  1 +
 arch/powerpc/kvm/book3s_rtas.c      | 14 ++++++--------
 3 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/powerpc/include/asm/kvm_host.h b/arch/powerpc/include/asm/kvm_host.h
index 5e12e19940e2..defa553fe823 100644
--- a/arch/powerpc/include/asm/kvm_host.h
+++ b/arch/powerpc/include/asm/kvm_host.h
@@ -271,6 +271,7 @@ struct kvm_arch {
 #ifdef CONFIG_PPC_BOOK3S_64
 	struct list_head spapr_tce_tables;
 	struct list_head rtas_tokens;
+	struct mutex rtas_token_lock;
 	DECLARE_BITMAP(enabled_hcalls, MAX_HCALL_OPCODE/4 + 1);
 #endif
 #ifdef CONFIG_KVM_MPIC
diff --git a/arch/powerpc/kvm/book3s.c b/arch/powerpc/kvm/book3s.c
index b6952dd23152..73c3c127d858 100644
--- a/arch/powerpc/kvm/book3s.c
+++ b/arch/powerpc/kvm/book3s.c
@@ -811,6 +811,7 @@ int kvmppc_core_init_vm(struct kvm *kvm)
 #ifdef CONFIG_PPC64
 	INIT_LIST_HEAD_RCU(&kvm->arch.spapr_tce_tables);
 	INIT_LIST_HEAD(&kvm->arch.rtas_tokens);
+	mutex_init(&kvm->arch.rtas_token_lock);
 #endif
 
 	return kvm->arch.kvm_ops->init_vm(kvm);
diff --git a/arch/powerpc/kvm/book3s_rtas.c b/arch/powerpc/kvm/book3s_rtas.c
index ef27fbd5d9c5..b1b2273d1f6d 100644
--- a/arch/powerpc/kvm/book3s_rtas.c
+++ b/arch/powerpc/kvm/book3s_rtas.c
@@ -133,7 +133,7 @@ static int rtas_token_undefine(struct kvm *kvm, char *name)
 {
 	struct rtas_token_definition *d, *tmp;
 
-	lockdep_assert_held(&kvm->lock);
+	lockdep_assert_held(&kvm->arch.rtas_token_lock);
 
 	list_for_each_entry_safe(d, tmp, &kvm->arch.rtas_tokens, list) {
 		if (rtas_name_matches(d->handler->name, name)) {
@@ -154,7 +154,7 @@ static int rtas_token_define(struct kvm *kvm, char *name, u64 token)
 	bool found;
 	int i;
 
-	lockdep_assert_held(&kvm->lock);
+	lockdep_assert_held(&kvm->arch.rtas_token_lock);
 
 	list_for_each_entry(d, &kvm->arch.rtas_tokens, list) {
 		if (d->token == token)
@@ -193,14 +193,14 @@ int kvm_vm_ioctl_rtas_define_token(struct kvm *kvm, void __user *argp)
 	if (copy_from_user(&args, argp, sizeof(args)))
 		return -EFAULT;
 
-	mutex_lock(&kvm->lock);
+	mutex_lock(&kvm->arch.rtas_token_lock);
 
 	if (args.token)
 		rc = rtas_token_define(kvm, args.name, args.token);
 	else
 		rc = rtas_token_undefine(kvm, args.name);
 
-	mutex_unlock(&kvm->lock);
+	mutex_unlock(&kvm->arch.rtas_token_lock);
 
 	return rc;
 }
@@ -232,7 +232,7 @@ int kvmppc_rtas_hcall(struct kvm_vcpu *vcpu)
 	orig_rets = args.rets;
 	args.rets = &args.args[be32_to_cpu(args.nargs)];
 
-	mutex_lock(&vcpu->kvm->lock);
+	mutex_lock(&vcpu->kvm->arch.rtas_token_lock);
 
 	rc = -ENOENT;
 	list_for_each_entry(d, &vcpu->kvm->arch.rtas_tokens, list) {
@@ -243,7 +243,7 @@ int kvmppc_rtas_hcall(struct kvm_vcpu *vcpu)
 		}
 	}
 
-	mutex_unlock(&vcpu->kvm->lock);
+	mutex_unlock(&vcpu->kvm->arch.rtas_token_lock);
 
 	if (rc == 0) {
 		args.rets = orig_rets;
@@ -269,8 +269,6 @@ void kvmppc_rtas_tokens_free(struct kvm *kvm)
 {
 	struct rtas_token_definition *d, *tmp;
 
-	lockdep_assert_held(&kvm->lock);
-
 	list_for_each_entry_safe(d, tmp, &kvm->arch.rtas_tokens, list) {
 		list_del(&d->list);
 		kfree(d);
-- 
2.20.1

[PATCH 4.9 111/117] KVM: PPC: Book3S HV: Dont take kvm->lock around kvm_for_each_vcpu

[Greg Kroah-Hartman]

[ Upstream commit 5a3f49364c3ffa1107bd88f8292406e98c5d206c ]

Currently the HV KVM code takes the kvm->lock around calls to
kvm_for_each_vcpu() and kvm_get_vcpu_by_id() (which can call
kvm_for_each_vcpu() internally).  However, that leads to a lock
order inversion problem, because these are called in contexts where
the vcpu mutex is held, but the vcpu mutexes nest within kvm->lock
according to Documentation/virtual/kvm/locking.txt.  Hence there
is a possibility of deadlock.

To fix this, we simply don't take the kvm->lock mutex around these
calls.  This is safe because the implementations of kvm_for_each_vcpu()
and kvm_get_vcpu_by_id() have been designed to be able to be called
locklessly.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/kvm/book3s_hv.c | 9 +--------
 1 file changed, 1 insertion(+), 8 deletions(-)

diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c
index 0a2b247dbc6b..e840f943cd2c 100644
--- a/arch/powerpc/kvm/book3s_hv.c
+++ b/arch/powerpc/kvm/book3s_hv.c
@@ -374,12 +374,7 @@ static void kvmppc_dump_regs(struct kvm_vcpu *vcpu)
 
 static struct kvm_vcpu *kvmppc_find_vcpu(struct kvm *kvm, int id)
 {
-	struct kvm_vcpu *ret;
-
-	mutex_lock(&kvm->lock);
-	ret = kvm_get_vcpu_by_id(kvm, id);
-	mutex_unlock(&kvm->lock);
-	return ret;
+	return kvm_get_vcpu_by_id(kvm, id);
 }
 
 static void init_vpa(struct kvm_vcpu *vcpu, struct lppaca *vpa)
@@ -1098,7 +1093,6 @@ static void kvmppc_set_lpcr(struct kvm_vcpu *vcpu, u64 new_lpcr,
 	struct kvmppc_vcore *vc = vcpu->arch.vcore;
 	u64 mask;
 
-	mutex_lock(&kvm->lock);
 	spin_lock(&vc->lock);
 	/*
 	 * If ILE (interrupt little-endian) has changed, update the
@@ -1132,7 +1126,6 @@ static void kvmppc_set_lpcr(struct kvm_vcpu *vcpu, u64 new_lpcr,
 		mask &= 0xFFFFFFFF;
 	vc->lpcr = (vc->lpcr & ~mask) | (new_lpcr & mask);
 	spin_unlock(&vc->lock);
-	mutex_unlock(&kvm->lock);
 }
 
 static int kvmppc_get_one_reg_hv(struct kvm_vcpu *vcpu, u64 id,
-- 
2.20.1

[PATCH 4.9 112/117] net: sh_eth: fix mdio access in sh_eth_close() for R-Car Gen2 and RZ/A1 SoCs

[Greg Kroah-Hartman]

[ Upstream commit 315ca92dd863fecbffc0bb52ae0ac11e0398726a ]

The sh_eth_close() resets the MAC and then calls phy_stop()
so that mdio read access result is incorrect without any error
according to kernel trace like below:

ifconfig-216   [003] .n..   109.133124: mdio_access: ee700000.ethernet-ffffffff read  phy:0x01 reg:0x00 val:0xffff

According to the hardware manual, the RMII mode should be set to 1
before operation the Ethernet MAC. However, the previous code was not
set to 1 after the driver issued the soft_reset in sh_eth_dev_exit()
so that the mdio read access result seemed incorrect. To fix the issue,
this patch adds a condition and set the RMII mode register in
sh_eth_dev_exit() for R-Car Gen2 and RZ/A1 SoCs.

Note that when I have tried to move the sh_eth_dev_exit() calling
after phy_stop() on sh_eth_close(), but it gets worse (kernel panic
happened and it seems that a register is accessed while the clock is
off).

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/renesas/sh_eth.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c
index c59e8fe37069..49300194d3f9 100644
--- a/drivers/net/ethernet/renesas/sh_eth.c
+++ b/drivers/net/ethernet/renesas/sh_eth.c
@@ -1388,6 +1388,10 @@ static void sh_eth_dev_exit(struct net_device *ndev)
 	sh_eth_get_stats(ndev);
 	sh_eth_reset(ndev);
 
+	/* Set the RMII mode again if required */
+	if (mdp->cd->rmiimode)
+		sh_eth_write(ndev, 0x1, RMIIMODE);
+
 	/* Set MAC address again */
 	update_mac_address(ndev);
 }
-- 
2.20.1

[PATCH 4.9 113/117] scsi: libcxgbi: add a check for NULL pointer in cxgbi_check_route()

[Greg Kroah-Hartman]

[ Upstream commit cc555759117e8349088e0c5d19f2f2a500bafdbd ]

ip_dev_find() can return NULL so add a check for NULL pointer.

Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/cxgbi/libcxgbi.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/scsi/cxgbi/libcxgbi.c b/drivers/scsi/cxgbi/libcxgbi.c
index 2ffe029ff2b6..e974106f2bb5 100644
--- a/drivers/scsi/cxgbi/libcxgbi.c
+++ b/drivers/scsi/cxgbi/libcxgbi.c
@@ -637,6 +637,10 @@ static struct cxgbi_sock *cxgbi_check_route(struct sockaddr *dst_addr)
 
 	if (ndev->flags & IFF_LOOPBACK) {
 		ndev = ip_dev_find(&init_net, daddr->sin_addr.s_addr);
+		if (!ndev) {
+			err = -ENETUNREACH;
+			goto rel_neigh;
+		}
 		mtu = ndev->mtu;
 		pr_info("rt dev %s, loopback -> %s, mtu %u.\n",
 			n->dev->name, ndev->name, mtu);
-- 
2.20.1

[PATCH 4.9 114/117] scsi: smartpqi: properly set both the DMA mask and the coherent DMA mask

[Greg Kroah-Hartman]

[ Upstream commit 1d94f06e7f5df4064ef336b7b710f50143b64a53 ]

When SME is enabled, the smartpqi driver won't work on the HP DL385 G10
machine, which causes the failure of kernel boot because it fails to
allocate pqi error buffer. Please refer to the kernel log:
....
[    9.431749] usbcore: registered new interface driver uas
[    9.441524] Microsemi PQI Driver (v1.1.4-130)
[    9.442956] i40e 0000:04:00.0: fw 6.70.48768 api 1.7 nvm 10.2.5
[    9.447237] smartpqi 0000:23:00.0: Microsemi Smart Family Controller found
         Starting dracut initqueue hook...
[  OK  ] Started Show Plymouth Boot Scre[    9.471654] Broadcom NetXtreme-C/E driver bnxt_en v1.9.1
en.
[  OK  ] Started Forward Password Requests to Plymouth Directory Watch.
[[0;[    9.487108] smartpqi 0000:23:00.0: failed to allocate PQI error buffer
....
[  139.050544] dracut-initqueue[949]: Warning: dracut-initqueue timeout - starting timeout scripts
[  139.589779] dracut-initqueue[949]: Warning: dracut-initqueue timeout - starting timeout scripts

Basically, the fact that the coherent DMA mask value wasn't set caused the
driver to fall back to SWIOTLB when SME is active.

For correct operation, lets call the dma_set_mask_and_coherent() to
properly set the mask for both streaming and coherent, in order to inform
the kernel about the devices DMA addressing capabilities.

Signed-off-by: Lianbo Jiang <lijiang@redhat.com>
Acked-by: Don Brace <don.brace@microsemi.com>
Tested-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/smartpqi/smartpqi_init.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/smartpqi/smartpqi_init.c b/drivers/scsi/smartpqi/smartpqi_init.c
index 06a062455404..b12f7f952b70 100644
--- a/drivers/scsi/smartpqi/smartpqi_init.c
+++ b/drivers/scsi/smartpqi/smartpqi_init.c
@@ -5478,7 +5478,7 @@ static int pqi_pci_init(struct pqi_ctrl_info *ctrl_info)
 	else
 		mask = DMA_BIT_MASK(32);
 
-	rc = dma_set_mask(&ctrl_info->pci_dev->dev, mask);
+	rc = dma_set_mask_and_coherent(&ctrl_info->pci_dev->dev, mask);
 	if (rc) {
 		dev_err(&ctrl_info->pci_dev->dev, "failed to set DMA mask\n");
 		goto disable_device;
-- 
2.20.1

[PATCH 4.9 115/117] scsi: libsas: delete sas port if expander discover failed

[Greg Kroah-Hartman]

[ Upstream commit 3b0541791453fbe7f42867e310e0c9eb6295364d ]

The sas_port(phy->port) allocated in sas_ex_discover_expander() will not be
deleted when the expander failed to discover. This will cause resource leak
and a further issue of kernel BUG like below:

[159785.843156]  port-2:17:29: trying to add phy phy-2:17:29 fails: it's
already part of another port
[159785.852144] ------------[ cut here  ]------------
[159785.856833] kernel BUG at drivers/scsi/scsi_transport_sas.c:1086!
[159785.863000] Internal error: Oops - BUG: 0 [#1] SMP
[159785.867866] CPU: 39 PID: 16993 Comm: kworker/u96:2 Tainted: G
W  OE     4.19.25-vhulk1901.1.0.h111.aarch64 #1
[159785.878458] Hardware name: Huawei Technologies Co., Ltd.
Hi1620EVBCS/Hi1620EVBCS, BIOS Hi1620 CS B070 1P TA 03/21/2019
[159785.889231] Workqueue: 0000:74:02.0_disco_q sas_discover_domain
[159785.895224] pstate: 40c00009 (nZcv daif +PAN +UAO)
[159785.900094] pc : sas_port_add_phy+0x188/0x1b8
[159785.904524] lr : sas_port_add_phy+0x188/0x1b8
[159785.908952] sp : ffff0001120e3b80
[159785.912341] x29: ffff0001120e3b80 x28: 0000000000000000
[159785.917727] x27: ffff802ade8f5400 x26: ffff0000681b7560
[159785.923111] x25: ffff802adf11a800 x24: ffff0000680e8000
[159785.928496] x23: ffff802ade8f5728 x22: ffff802ade8f5708
[159785.933880] x21: ffff802adea2db40 x20: ffff802ade8f5400
[159785.939264] x19: ffff802adea2d800 x18: 0000000000000010
[159785.944649] x17: 00000000821bf734 x16: ffff00006714faa0
[159785.950033] x15: ffff0000e8ab4ecf x14: 7261702079646165
[159785.955417] x13: 726c612073277469 x12: ffff00006887b830
[159785.960802] x11: ffff00006773eaa0 x10: 7968702079687020
[159785.966186] x9 : 0000000000002453 x8 : 726f702072656874
[159785.971570] x7 : 6f6e6120666f2074 x6 : ffff802bcfb21290
[159785.976955] x5 : ffff802bcfb21290 x4 : 0000000000000000
[159785.982339] x3 : ffff802bcfb298c8 x2 : 337752b234c2ab00
[159785.987723] x1 : 337752b234c2ab00 x0 : 0000000000000000
[159785.993108] Process kworker/u96:2 (pid: 16993, stack limit =
0x0000000072dae094)
[159786.000576] Call trace:
[159786.003097]  sas_port_add_phy+0x188/0x1b8
[159786.007179]  sas_ex_get_linkrate.isra.5+0x134/0x140
[159786.012130]  sas_ex_discover_expander+0x128/0x408
[159786.016906]  sas_ex_discover_dev+0x218/0x4c8
[159786.021249]  sas_ex_discover_devices+0x9c/0x1a8
[159786.025852]  sas_discover_root_expander+0x134/0x160
[159786.030802]  sas_discover_domain+0x1b8/0x1e8
[159786.035148]  process_one_work+0x1b4/0x3f8
[159786.039230]  worker_thread+0x54/0x470
[159786.042967]  kthread+0x134/0x138
[159786.046269]  ret_from_fork+0x10/0x18
[159786.049918] Code: 91322300 f0004402 91178042 97fe4c9b (d4210000)
[159786.056083] Modules linked in: hns3_enet_ut(OE) hclge(OE) hnae3(OE)
hisi_sas_test_hw(OE) hisi_sas_test_main(OE) serdes(OE)
[159786.067202] ---[ end trace 03622b9e2d99e196  ]---
[159786.071893] Kernel panic - not syncing: Fatal exception
[159786.077190] SMP: stopping secondary CPUs
[159786.081192] Kernel Offset: disabled
[159786.084753] CPU features: 0x2,a2a00a38

Fixes: 2908d778ab3e ("[SCSI] aic94xx: new driver")
Reported-by: Jian Luo <luojian5@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
CC: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/libsas/sas_expander.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c
index ee1f9ee995e5..400eee9d7783 100644
--- a/drivers/scsi/libsas/sas_expander.c
+++ b/drivers/scsi/libsas/sas_expander.c
@@ -978,6 +978,8 @@ static struct domain_device *sas_ex_discover_expander(
 		list_del(&child->dev_list_node);
 		spin_unlock_irq(&parent->port->dev_list_lock);
 		sas_put_device(child);
+		sas_port_delete(phy->port);
+		phy->port = NULL;
 		return NULL;
 	}
 	list_add_tail(&child->siblings, &parent->ex_dev.children);
-- 
2.20.1

[PATCH 4.9 116/117] mlxsw: spectrum: Prevent force of 56G

[Greg Kroah-Hartman]

[ Upstream commit 275e928f19117d22f6d26dee94548baf4041b773 ]

Force of 56G is not supported by hardware in Ethernet devices. This
configuration fails with a bad parameter error from firmware.

Add check of this case. Instead of trying to set 56G with autoneg off,
return a meaningful error.

Fixes: 56ade8fe3fe1 ("mlxsw: spectrum: Add initial support for Spectrum ASIC")
Signed-off-by: Amit Cohen <amitc@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlxsw/spectrum.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
index e3ed70a24029..585a40cc6470 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
@@ -2044,6 +2044,10 @@ mlxsw_sp_port_set_link_ksettings(struct net_device *dev,
 	mlxsw_reg_ptys_unpack(ptys_pl, &eth_proto_cap, NULL, NULL);
 
 	autoneg = cmd->base.autoneg == AUTONEG_ENABLE;
+	if (!autoneg && cmd->base.speed == SPEED_56000) {
+		netdev_err(dev, "56G not supported with autoneg off\n");
+		return -EINVAL;
+	}
 	eth_proto_new = autoneg ?
 		mlxsw_sp_to_ptys_advert_link(cmd) :
 		mlxsw_sp_to_ptys_speed(cmd->base.speed);
-- 
2.20.1

[PATCH 4.9 117/117] Abort file_remove_privs() for non-reg. files

[Greg Kroah-Hartman]

From: Alexander Lochmann <alexander.lochmann@tu-dortmund.de>

commit f69e749a49353d96af1a293f56b5b56de59c668a upstream.

file_remove_privs() might be called for non-regular files, e.g.
blkdev inode. There is no reason to do its job on things
like blkdev inodes, pipes, or cdevs. Hence, abort if
file does not refer to a regular inode.

AV: more to the point, for devices there might be any number of
inodes refering to given device.  Which one to strip the permissions
from, even if that made any sense in the first place?  All of them
will be observed with contents modified, after all.

Found by LockDoc (Alexander Lochmann, Horst Schirmeier and Olaf
Spinczyk)

Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Alexander Lochmann <alexander.lochmann@tu-dortmund.de>
Signed-off-by: Horst Schirmeier <horst.schirmeier@tu-dortmund.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Zubin Mithra <zsm@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/inode.c |    9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

--- a/fs/inode.c
+++ b/fs/inode.c
@@ -1804,8 +1804,13 @@ int file_remove_privs(struct file *file)
 	int kill;
 	int error = 0;
 
-	/* Fast path for nothing security related */
-	if (IS_NOSEC(inode))
+	/*
+	 * Fast path for nothing security related.
+	 * As well for non-regular files, e.g. blkdev inodes.
+	 * For example, blkdev_write_iter() might get here
+	 * trying to remove privs which it is not allowed to.
+	 */
+	if (IS_NOSEC(inode) || !S_ISREG(inode->i_mode))
 		return 0;
 
 	kill = dentry_needs_remove_privs(dentry);

Re: [PATCH 4.9 000/117] 4.9.183-stable review

[kernelci.org bot]

stable-rc/linux-4.9.y boot: 102 boots: 1 failed, 99 passed with 2 offline (v4.9.182-118-gb2977e94f62a)

Full Boot Summary: https://kernelci.org/boot/all/job/stable-rc/branch/linux-4.9.y/kernel/v4.9.182-118-gb2977e94f62a/
Full Build Summary: https://kernelci.org/build/stable-rc/branch/linux-4.9.y/kernel/v4.9.182-118-gb2977e94f62a/

Tree: stable-rc
Branch: linux-4.9.y
Git Describe: v4.9.182-118-gb2977e94f62a
Git Commit: b2977e94f62a4008b6cc418f3af3c1a04ddb8ce3
Git URL: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Tested: 52 unique boards, 23 SoC families, 15 builds out of 197

Boot Regressions Detected:

arm:

    omap2plus_defconfig:
        gcc-8:
          omap3-beagle-xm:
              lab-baylibre: new failure (last pass: v4.9.182)

Boot Failure Detected:

arm:
    omap2plus_defconfig:
        gcc-8:
            omap3-beagle-xm: 1 failed lab

Offline Platforms:

arm:

    qcom_defconfig:
        gcc-8
            qcom-apq8064-cm-qs600: 1 offline lab

arm64:

    defconfig:
        gcc-8
            apq8016-sbc: 1 offline lab

---
For more info write to <info@kernelci.org>

Re: [PATCH 4.9 000/117] 4.9.183-stable review

[Naresh Kamboju]

On Thu, 20 Jun 2019 at 23:33, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 4.9.183 release.
> There are 117 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sat 22 Jun 2019 05:42:15 PM UTC.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.183-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Summary
------------------------------------------------------------------------

kernel: 4.9.183-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.9.y
git commit: b2977e94f62a4008b6cc418f3af3c1a04ddb8ce3
git describe: v4.9.182-118-gb2977e94f62a
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-4.9-oe/build/v4.9.182-118-gb2977e94f62a


No regressions (compared to build v4.9.182)

No fixes (compared to build v4.9.182)


Ran 23588 total tests in the following environments and test suites.

Environments
--------------
- dragonboard-410c - arm64
- hi6220-hikey - arm64
- i386
- juno-r2 - arm64
- qemu_arm
- qemu_arm64
- qemu_i386
- qemu_x86_64
- x15 - arm
- x86_64

Test Suites
-----------
* build
* install-android-platform-tools-r2600
* kselftest
* libhugetlbfs
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-cpuhotplug-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-timers-tests
* perf
* spectre-meltdown-checker-test
* v4l2-compliance
* network-basic-tests
* ltp-open-posix-tests
* kvm-unit-tests
* kselftest-vsyscall-mode-native
* kselftest-vsyscall-mode-none
* prep-tmp-disk

-- 
Linaro LKFT
https://lkft.linaro.org

Re: [PATCH 4.9 000/117] 4.9.183-stable review

[Guenter Roeck]

On 6/20/19 10:55 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.9.183 release.
> There are 117 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sat 22 Jun 2019 05:42:15 PM UTC.
> Anything received after that time might be too late.
> 

Build results:
	total: 172 pass: 172 fail: 0
Qemu test results:
	total: 333 pass: 333 fail: 0

Guenter