[PATCH AUTOSEL 4.14 01/21] ASoC : cs4265 : readable register too low

[PATCH AUTOSEL 4.14 01/21] ASoC : cs4265 : readable register too low

[Sasha Levin]

From: Matt Flax <flatmax@flatmax.org>

[ Upstream commit f3df05c805983427319eddc2411a2105ee1757cf ]

The cs4265_readable_register function stopped short of the maximum
register.

An example bug is taken from :
https://github.com/Audio-Injector/Ultra/issues/25

Where alsactl store fails with :
Cannot read control '2,0,0,C Data Buffer,0': Input/output error

This patch fixes the bug by setting the cs4265 to have readable
registers up to the maximum hardware register CS4265_MAX_REGISTER.

Signed-off-by: Matt Flax <flatmax@flatmax.org>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/cs4265.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/codecs/cs4265.c b/sound/soc/codecs/cs4265.c
index 6e8eb1f5a041..bed64723e5d9 100644
--- a/sound/soc/codecs/cs4265.c
+++ b/sound/soc/codecs/cs4265.c
@@ -60,7 +60,7 @@ static const struct reg_default cs4265_reg_defaults[] = {
 static bool cs4265_readable_register(struct device *dev, unsigned int reg)
 {
 	switch (reg) {
-	case CS4265_CHIP_ID ... CS4265_SPDIF_CTL2:
+	case CS4265_CHIP_ID ... CS4265_MAX_REGISTER:
 		return true;
 	default:
 		return false;
-- 
2.20.1

[PATCH AUTOSEL 4.14 02/21] ASoC: soc-pcm: BE dai needs prepare when pause release after resume

[Sasha Levin]

From: Libin Yang <libin.yang@intel.com>

[ Upstream commit 5087a8f17df868601cd7568299e91c28086d2b45 ]

If playback/capture is paused and system enters S3, after system returns
from suspend, BE dai needs to call prepare() callback when playback/capture
is released from pause if RESUME_INFO flag is not set.

Currently, the dpcm_be_dai_prepare() function will block calling prepare()
if the pcm is in SND_SOC_DPCM_STATE_PAUSED state. This will cause the
following test case fail if the pcm uses BE:

playback -> pause -> S3 suspend -> S3 resume -> pause release

The playback may exit abnormally when pause is released because the BE dai
prepare() is not called.

This patch allows dpcm_be_dai_prepare() to call dai prepare() callback in
SND_SOC_DPCM_STATE_PAUSED state.

Signed-off-by: Libin Yang <libin.yang@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/soc-pcm.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/sound/soc/soc-pcm.c b/sound/soc/soc-pcm.c
index 584b7ffe78f5..052b6294a428 100644
--- a/sound/soc/soc-pcm.c
+++ b/sound/soc/soc-pcm.c
@@ -2233,7 +2233,8 @@ int dpcm_be_dai_prepare(struct snd_soc_pcm_runtime *fe, int stream)
 
 		if ((be->dpcm[stream].state != SND_SOC_DPCM_STATE_HW_PARAMS) &&
 		    (be->dpcm[stream].state != SND_SOC_DPCM_STATE_STOP) &&
-		    (be->dpcm[stream].state != SND_SOC_DPCM_STATE_SUSPEND))
+		    (be->dpcm[stream].state != SND_SOC_DPCM_STATE_SUSPEND) &&
+		    (be->dpcm[stream].state != SND_SOC_DPCM_STATE_PAUSED))
 			continue;
 
 		dev_dbg(be->dev, "ASoC: prepare BE %s\n",
-- 
2.20.1

[PATCH AUTOSEL 4.14 03/21] spi: bitbang: Fix NULL pointer dereference in spi_unregister_master

[Sasha Levin]

From: YueHaibing <yuehaibing@huawei.com>

[ Upstream commit 5caaf29af5ca82d5da8bc1d0ad07d9e664ccf1d8 ]

If spi_register_master fails in spi_bitbang_start
because device_add failure, We should return the
error code other than 0, otherwise calling
spi_bitbang_stop may trigger NULL pointer dereference
like this:

BUG: KASAN: null-ptr-deref in __list_del_entry_valid+0x45/0xd0
Read of size 8 at addr 0000000000000000 by task syz-executor.0/3661

CPU: 0 PID: 3661 Comm: syz-executor.0 Not tainted 5.1.0+ #28
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
Call Trace:
 dump_stack+0xa9/0x10e
 ? __list_del_entry_valid+0x45/0xd0
 ? __list_del_entry_valid+0x45/0xd0
 __kasan_report+0x171/0x18d
 ? __list_del_entry_valid+0x45/0xd0
 kasan_report+0xe/0x20
 __list_del_entry_valid+0x45/0xd0
 spi_unregister_controller+0x99/0x1b0
 spi_lm70llp_attach+0x3ae/0x4b0 [spi_lm70llp]
 ? 0xffffffffc1128000
 ? klist_next+0x131/0x1e0
 ? driver_detach+0x40/0x40 [parport]
 port_check+0x3b/0x50 [parport]
 bus_for_each_dev+0x115/0x180
 ? subsys_dev_iter_exit+0x20/0x20
 __parport_register_driver+0x1f0/0x210 [parport]
 ? 0xffffffffc1150000
 do_one_initcall+0xb9/0x3b5
 ? perf_trace_initcall_level+0x270/0x270
 ? kasan_unpoison_shadow+0x30/0x40
 ? kasan_unpoison_shadow+0x30/0x40
 do_init_module+0xe0/0x330
 load_module+0x38eb/0x4270
 ? module_frob_arch_sections+0x20/0x20
 ? kernel_read_file+0x188/0x3f0
 ? find_held_lock+0x6d/0xd0
 ? fput_many+0x1a/0xe0
 ? __do_sys_finit_module+0x162/0x190
 __do_sys_finit_module+0x162/0x190
 ? __ia32_sys_init_module+0x40/0x40
 ? __mutex_unlock_slowpath+0xb4/0x3f0
 ? wait_for_completion+0x240/0x240
 ? vfs_write+0x160/0x2a0
 ? lockdep_hardirqs_off+0xb5/0x100
 ? mark_held_locks+0x1a/0x90
 ? do_syscall_64+0x14/0x2a0
 do_syscall_64+0x72/0x2a0
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: 702a4879ec33 ("spi: bitbang: Let spi_bitbang_start() take a reference to master")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Axel Lin <axel.lin@ingics.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-bitbang.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/spi/spi-bitbang.c b/drivers/spi/spi-bitbang.c
index 3aa9e6e3dac8..4ef54436b9d4 100644
--- a/drivers/spi/spi-bitbang.c
+++ b/drivers/spi/spi-bitbang.c
@@ -392,7 +392,7 @@ int spi_bitbang_start(struct spi_bitbang *bitbang)
 	if (ret)
 		spi_master_put(master);
 
-	return 0;
+	return ret;
 }
 EXPORT_SYMBOL_GPL(spi_bitbang_start);
 
-- 
2.20.1

[PATCH AUTOSEL 4.14 04/21] ASoC: core: lock client_mutex while removing link components

[Sasha Levin]

From: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>

[ Upstream commit 34ac3c3eb8f0c07252ceddf0a22dd240e5c91ccb ]

Removing link components results in topology unloading. So,
acquire the client_mutex before removing components in
soc_remove_link_components. This will prevent the lockdep warning
seen when dai links are removed during topology removal.

Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/soc-core.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c
index 42c2a3065b77..eb23c237b622 100644
--- a/sound/soc/soc-core.c
+++ b/sound/soc/soc-core.c
@@ -1258,12 +1258,14 @@ static void soc_remove_link_components(struct snd_soc_card *card,
 	struct snd_soc_component *component;
 	struct snd_soc_rtdcom_list *rtdcom;
 
+	mutex_lock(&client_mutex);
 	for_each_rtdcom(rtd, rtdcom) {
 		component = rtdcom->component;
 
 		if (component->driver->remove_order == order)
 			soc_remove_component(component);
 	}
+	mutex_unlock(&client_mutex);
 }
 
 static void soc_remove_dai_links(struct snd_soc_card *card)
-- 
2.20.1

[PATCH AUTOSEL 4.14 05/21] ASoC: sun4i-codec: fix first delay on Speaker

[Sasha Levin]

From: Georgii Staroselskii <georgii.staroselskii@emlid.com>

[ Upstream commit 1f2675f6655838aaf910f911fd0abc821e3ff3df ]

Allwinner DAC seems to have a delay in the Speaker audio routing. When
playing a sound for the first time, the sound gets chopped. On a second
play the sound is played correctly. After some time (~5s) the issue gets
back.

This commit seems to be fixing the same issue as bf14da7 but
for another codepath.

This is the DTS that was used to debug the problem.

&codec {
        allwinner,pa-gpios = <&r_pio 0 11 GPIO_ACTIVE_HIGH>; /* PL11 */
        allwinner,audio-routing =
                "Speaker", "LINEOUT";

        status = "okay";
}

Signed-off-by: Georgii Staroselskii <georgii.staroselskii@emlid.com>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/sunxi/sun4i-codec.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/sound/soc/sunxi/sun4i-codec.c b/sound/soc/sunxi/sun4i-codec.c
index baa9007464ed..0391297eecd6 100644
--- a/sound/soc/sunxi/sun4i-codec.c
+++ b/sound/soc/sunxi/sun4i-codec.c
@@ -1174,6 +1174,15 @@ static int sun4i_codec_spk_event(struct snd_soc_dapm_widget *w,
 	gpiod_set_value_cansleep(scodec->gpio_pa,
 				 !!SND_SOC_DAPM_EVENT_ON(event));
 
+	if (SND_SOC_DAPM_EVENT_ON(event)) {
+		/*
+		 * Need a delay to wait for DAC to push the data. 700ms seems
+		 * to be the best compromise not to feel this delay while
+		 * playing a sound.
+		 */
+		msleep(700);
+	}
+
 	return 0;
 }
 
-- 
2.20.1

[PATCH AUTOSEL 4.14 06/21] drm/mediatek: fix unbind functions

[Sasha Levin]

From: Hsin-Yi Wang <hsinyi@chromium.org>

[ Upstream commit 8fd7a37b191f93737f6280a9b5de65f98acc12c9 ]

detatch panel in mtk_dsi_destroy_conn_enc(), since .bind will try to
attach it again.

Fixes: 2e54c14e310f ("drm/mediatek: Add DSI sub driver")
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Signed-off-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/mediatek/mtk_dsi.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c
index 7e5e24c2152a..413313f19c36 100644
--- a/drivers/gpu/drm/mediatek/mtk_dsi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
@@ -851,6 +851,8 @@ static void mtk_dsi_destroy_conn_enc(struct mtk_dsi *dsi)
 	/* Skip connector cleanup if creation was delegated to the bridge */
 	if (dsi->conn.dev)
 		drm_connector_cleanup(&dsi->conn);
+	if (dsi->panel)
+		drm_panel_detach(dsi->panel);
 }
 
 static void mtk_dsi_ddp_start(struct mtk_ddp_comp *comp)
-- 
2.20.1

[PATCH AUTOSEL 4.14 07/21] drm/mediatek: call drm_atomic_helper_shutdown() when unbinding driver

[Sasha Levin]

From: Hsin-Yi Wang <hsinyi@chromium.org>

[ Upstream commit cf49b24ffa62766f8f04cd1c4cf17b75d29b240a ]

shutdown all CRTC when unbinding drm driver.

Fixes: 119f5173628a ("drm/mediatek: Add DRM Driver for Mediatek SoC MT8173.")
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Signed-off-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/mediatek/mtk_drm_drv.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/gpu/drm/mediatek/mtk_drm_drv.c b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
index a2ca90fc403c..cada1c75c41c 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_drv.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
@@ -270,6 +270,7 @@ static int mtk_drm_kms_init(struct drm_device *drm)
 static void mtk_drm_kms_deinit(struct drm_device *drm)
 {
 	drm_kms_helper_poll_fini(drm);
+	drm_atomic_helper_shutdown(drm);
 
 	component_unbind_all(drm->dev, drm);
 	drm_mode_config_cleanup(drm);
-- 
2.20.1

[PATCH AUTOSEL 4.14 08/21] drm/mediatek: call mtk_dsi_stop() after mtk_drm_crtc_atomic_disable()

[Sasha Levin]

From: Hsin-Yi Wang <hsinyi@chromium.org>

[ Upstream commit 2458d9d6d94be982b917e93c61a89b4426f32e31 ]

mtk_dsi_stop() should be called after mtk_drm_crtc_atomic_disable(), which
needs ovl irq for drm_crtc_wait_one_vblank(), since after mtk_dsi_stop() is
called, ovl irq will be disabled. If drm_crtc_wait_one_vblank() is called
after last irq, it will timeout with this message: "vblank wait timed out
on crtc 0". This happens sometimes when turning off the screen.

In drm_atomic_helper.c#disable_outputs(),
the calling sequence when turning off the screen is:

1. mtk_dsi_encoder_disable()
     --> mtk_output_dsi_disable()
       --> mtk_dsi_stop();  /* sometimes make vblank timeout in
                               atomic_disable */
       --> mtk_dsi_poweroff();
2. mtk_drm_crtc_atomic_disable()
     --> drm_crtc_wait_one_vblank();
     ...
       --> mtk_dsi_ddp_stop()
         --> mtk_dsi_poweroff();

mtk_dsi_poweroff() has reference count design, change to make
mtk_dsi_stop() called in mtk_dsi_poweroff() when refcount is 0.

Fixes: 0707632b5bac ("drm/mediatek: update DSI sub driver flow for sending commands to panel")
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Signed-off-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/mediatek/mtk_dsi.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c
index 413313f19c36..c1b8caad65e6 100644
--- a/drivers/gpu/drm/mediatek/mtk_dsi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
@@ -631,6 +631,15 @@ static void mtk_dsi_poweroff(struct mtk_dsi *dsi)
 	if (--dsi->refcount != 0)
 		return;
 
+	/*
+	 * mtk_dsi_stop() and mtk_dsi_start() is asymmetric, since
+	 * mtk_dsi_stop() should be called after mtk_drm_crtc_atomic_disable(),
+	 * which needs irq for vblank, and mtk_dsi_stop() will disable irq.
+	 * mtk_dsi_start() needs to be called in mtk_output_dsi_enable(),
+	 * after dsi is fully set.
+	 */
+	mtk_dsi_stop(dsi);
+
 	if (!mtk_dsi_switch_to_cmd_mode(dsi, VM_DONE_INT_FLAG, 500)) {
 		if (dsi->panel) {
 			if (drm_panel_unprepare(dsi->panel)) {
@@ -697,7 +706,6 @@ static void mtk_output_dsi_disable(struct mtk_dsi *dsi)
 		}
 	}
 
-	mtk_dsi_stop(dsi);
 	mtk_dsi_poweroff(dsi);
 
 	dsi->enabled = false;
-- 
2.20.1

[PATCH AUTOSEL 4.14 09/21] ASoC: max98090: remove 24-bit format support if RJ is 0

[Sasha Levin]

From: Yu-Hsuan Hsu <yuhsuan@chromium.org>

[ Upstream commit 5628c8979642a076f91ee86c3bae5ad251639af0 ]

The supported formats are S16_LE and S24_LE now. However, by datasheet
of max98090, S24_LE is only supported when it is in the right justified
mode. We should remove 24-bit format if it is not in that mode to avoid
triggering error.

Signed-off-by: Yu-Hsuan Hsu <yuhsuan@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/max98090.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/sound/soc/codecs/max98090.c b/sound/soc/codecs/max98090.c
index cc66ea5cc776..3fe09828745a 100644
--- a/sound/soc/codecs/max98090.c
+++ b/sound/soc/codecs/max98090.c
@@ -1924,6 +1924,21 @@ static int max98090_configure_dmic(struct max98090_priv *max98090,
 	return 0;
 }
 
+static int max98090_dai_startup(struct snd_pcm_substream *substream,
+				struct snd_soc_dai *dai)
+{
+	struct snd_soc_component *component = dai->component;
+	struct max98090_priv *max98090 = snd_soc_component_get_drvdata(component);
+	unsigned int fmt = max98090->dai_fmt;
+
+	/* Remove 24-bit format support if it is not in right justified mode. */
+	if ((fmt & SND_SOC_DAIFMT_FORMAT_MASK) != SND_SOC_DAIFMT_RIGHT_J) {
+		substream->runtime->hw.formats = SNDRV_PCM_FMTBIT_S16_LE;
+		snd_pcm_hw_constraint_msbits(substream->runtime, 0, 16, 16);
+	}
+	return 0;
+}
+
 static int max98090_dai_hw_params(struct snd_pcm_substream *substream,
 				   struct snd_pcm_hw_params *params,
 				   struct snd_soc_dai *dai)
@@ -2331,6 +2346,7 @@ EXPORT_SYMBOL_GPL(max98090_mic_detect);
 #define MAX98090_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_LE)
 
 static const struct snd_soc_dai_ops max98090_dai_ops = {
+	.startup = max98090_dai_startup,
 	.set_sysclk = max98090_dai_set_sysclk,
 	.set_fmt = max98090_dai_set_fmt,
 	.set_tdm_slot = max98090_set_tdm_slot,
-- 
2.20.1

[PATCH AUTOSEL 4.14 10/21] ASoC: sun4i-i2s: Fix sun8i tx channel offset mask

[Sasha Levin]

From: Marcus Cooper <codekipper@gmail.com>

[ Upstream commit 7e46169a5f35762f335898a75d1b8a242f2ae0f5 ]

Although not causing any noticeable issues, the mask for the
channel offset is covering too many bits.

Signed-off-by: Marcus Cooper <codekipper@gmail.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/sunxi/sun4i-i2s.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/sunxi/sun4i-i2s.c b/sound/soc/sunxi/sun4i-i2s.c
index b4af5ce78ecb..a10913f8293f 100644
--- a/sound/soc/sunxi/sun4i-i2s.c
+++ b/sound/soc/sunxi/sun4i-i2s.c
@@ -110,7 +110,7 @@
 
 #define SUN8I_I2S_TX_CHAN_MAP_REG	0x44
 #define SUN8I_I2S_TX_CHAN_SEL_REG	0x34
-#define SUN8I_I2S_TX_CHAN_OFFSET_MASK		GENMASK(13, 11)
+#define SUN8I_I2S_TX_CHAN_OFFSET_MASK		GENMASK(13, 12)
 #define SUN8I_I2S_TX_CHAN_OFFSET(offset)	(offset << 12)
 #define SUN8I_I2S_TX_CHAN_EN_MASK		GENMASK(11, 4)
 #define SUN8I_I2S_TX_CHAN_EN(num_chan)		(((1 << num_chan) - 1) << 4)
-- 
2.20.1

[PATCH AUTOSEL 4.14 11/21] ASoC: sun4i-i2s: Add offset to RX channel select

[Sasha Levin]

From: Marcus Cooper <codekipper@gmail.com>

[ Upstream commit f9927000cb35f250051f0f1878db12ee2626eea1 ]

Whilst testing the capture functionality of the i2s on the newer
SoCs it was noticed that the recording was somewhat distorted.
This was due to the offset not being set correctly on the receiver
side.

Signed-off-by: Marcus Cooper <codekipper@gmail.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/sunxi/sun4i-i2s.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/sound/soc/sunxi/sun4i-i2s.c b/sound/soc/sunxi/sun4i-i2s.c
index a10913f8293f..da0a2083e12a 100644
--- a/sound/soc/sunxi/sun4i-i2s.c
+++ b/sound/soc/sunxi/sun4i-i2s.c
@@ -442,6 +442,10 @@ static int sun4i_i2s_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
 		regmap_update_bits(i2s->regmap, SUN8I_I2S_TX_CHAN_SEL_REG,
 				   SUN8I_I2S_TX_CHAN_OFFSET_MASK,
 				   SUN8I_I2S_TX_CHAN_OFFSET(offset));
+
+		regmap_update_bits(i2s->regmap, SUN8I_I2S_RX_CHAN_SEL_REG,
+				   SUN8I_I2S_TX_CHAN_OFFSET_MASK,
+				   SUN8I_I2S_TX_CHAN_OFFSET(offset));
 	}
 
 	regmap_field_write(i2s->field_fmt_mode, val);
-- 
2.20.1

[PATCH AUTOSEL 4.14 12/21] usb: gadget: fusb300_udc: Fix memory leak of fusb300->ep[i]

[Sasha Levin]

From: Young Xiao <92siuyang@gmail.com>

[ Upstream commit 62fd0e0a24abeebe2c19fce49dd5716d9b62042d ]

There is no deallocation of fusb300->ep[i] elements, allocated at
fusb300_probe.

The patch adds deallocation of fusb300->ep array elements.

Signed-off-by: Young Xiao <92siuyang@gmail.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/gadget/udc/fusb300_udc.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/usb/gadget/udc/fusb300_udc.c b/drivers/usb/gadget/udc/fusb300_udc.c
index e0c1b0099265..089f39de6897 100644
--- a/drivers/usb/gadget/udc/fusb300_udc.c
+++ b/drivers/usb/gadget/udc/fusb300_udc.c
@@ -1345,12 +1345,15 @@ static const struct usb_gadget_ops fusb300_gadget_ops = {
 static int fusb300_remove(struct platform_device *pdev)
 {
 	struct fusb300 *fusb300 = platform_get_drvdata(pdev);
+	int i;
 
 	usb_del_gadget_udc(&fusb300->gadget);
 	iounmap(fusb300->reg);
 	free_irq(platform_get_irq(pdev, 0), fusb300);
 
 	fusb300_free_request(&fusb300->ep[0]->ep, fusb300->ep0_req);
+	for (i = 0; i < FUSB300_MAX_NUM_EP; i++)
+		kfree(fusb300->ep[i]);
 	kfree(fusb300);
 
 	return 0;
@@ -1494,6 +1497,8 @@ static int fusb300_probe(struct platform_device *pdev)
 		if (fusb300->ep0_req)
 			fusb300_free_request(&fusb300->ep[0]->ep,
 				fusb300->ep0_req);
+		for (i = 0; i < FUSB300_MAX_NUM_EP; i++)
+			kfree(fusb300->ep[i]);
 		kfree(fusb300);
 	}
 	if (reg)
-- 
2.20.1

[PATCH AUTOSEL 4.14 13/21] usb: gadget: udc: lpc32xx: allocate descriptor with GFP_ATOMIC

[Sasha Levin]

From: Alexandre Belloni <alexandre.belloni@bootlin.com>

[ Upstream commit fbc318afadd6e7ae2252d6158cf7d0c5a2132f7d ]

Gadget drivers may queue request in interrupt context. This would lead to
a descriptor allocation in that context. In that case we would hit
BUG_ON(in_interrupt()) in __get_vm_area_node.

Also remove the unnecessary cast.

Acked-by: Sylvain Lemieux <slemieux.tyco@gmail.com>
Tested-by: James Grant <jamesg@zaltys.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/gadget/udc/lpc32xx_udc.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/usb/gadget/udc/lpc32xx_udc.c b/drivers/usb/gadget/udc/lpc32xx_udc.c
index 8f32b5ee7734..6df1aded4503 100644
--- a/drivers/usb/gadget/udc/lpc32xx_udc.c
+++ b/drivers/usb/gadget/udc/lpc32xx_udc.c
@@ -935,8 +935,7 @@ static struct lpc32xx_usbd_dd_gad *udc_dd_alloc(struct lpc32xx_udc *udc)
 	dma_addr_t			dma;
 	struct lpc32xx_usbd_dd_gad	*dd;
 
-	dd = (struct lpc32xx_usbd_dd_gad *) dma_pool_alloc(
-			udc->dd_cache, (GFP_KERNEL | GFP_DMA), &dma);
+	dd = dma_pool_alloc(udc->dd_cache, GFP_ATOMIC | GFP_DMA, &dma);
 	if (dd)
 		dd->this_dma = dma;
 
-- 
2.20.1

[PATCH AUTOSEL 4.14 14/21] SoC: rt274: Fix internal jack assignment in set_jack callback

[Sasha Levin]

From: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>

[ Upstream commit 04268bf2757a125616b6c2140e6250f43b7b737a ]

When we call snd_soc_component_set_jack(component, NULL, NULL) we should
set rt274->jack to passed jack, so when interrupt is triggered it calls
snd_soc_jack_report(rt274->jack, ...) with proper value.

This fixes problem in machine where in register, we call
snd_soc_register(component, &headset, NULL), which just calls
rt274_mic_detect via callback.
Now when machine driver is removed "headset" will be gone, so we
need to tell codec driver that it's gone with:
snd_soc_register(component, NULL, NULL), but we also need to be able
to handle NULL jack argument here gracefully.
If we don't set it to NULL, next time the rt274_irq runs it will call
snd_soc_jack_report with first argument being invalid pointer and there
will be Oops.

Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/rt274.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/sound/soc/codecs/rt274.c b/sound/soc/codecs/rt274.c
index cd048df76232..43086ac9ffec 100644
--- a/sound/soc/codecs/rt274.c
+++ b/sound/soc/codecs/rt274.c
@@ -398,6 +398,8 @@ static int rt274_mic_detect(struct snd_soc_codec *codec,
 {
 	struct rt274_priv *rt274 = snd_soc_codec_get_drvdata(codec);
 
+	rt274->jack = jack;
+
 	if (jack == NULL) {
 		/* Disable jack detection */
 		regmap_update_bits(rt274->regmap, RT274_EAPD_GPIO_IRQ_CTRL,
@@ -405,7 +407,6 @@ static int rt274_mic_detect(struct snd_soc_codec *codec,
 
 		return 0;
 	}
-	rt274->jack = jack;
 
 	regmap_update_bits(rt274->regmap, RT274_EAPD_GPIO_IRQ_CTRL,
 				RT274_IRQ_EN, RT274_IRQ_EN);
-- 
2.20.1

[PATCH AUTOSEL 4.14 15/21] scsi: hpsa: correct ioaccel2 chaining

[Sasha Levin]

From: Don Brace <don.brace@microsemi.com>

[ Upstream commit 625d7d3518875c4d303c652a198feaa13d9f52d9 ]

- set ioaccel2_sg_element member 'chain_indicator' to IOACCEL2_LAST_SG for
  the last s/g element.

- set ioaccel2_sg_element member 'chain_indicator' to IOACCEL2_CHAIN when
  chaining.

Reviewed-by: Bader Ali - Saleh <bader.alisaleh@microsemi.com>
Reviewed-by: Scott Teel <scott.teel@microsemi.com>
Reviewed-by: Matt Perricone <matt.perricone@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/hpsa.c     | 7 ++++++-
 drivers/scsi/hpsa_cmd.h | 1 +
 2 files changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index 5b4b7f9be2d7..6d520e8945f7 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -4800,7 +4800,7 @@ static int hpsa_scsi_ioaccel2_queue_command(struct ctlr_info *h,
 			curr_sg->reserved[0] = 0;
 			curr_sg->reserved[1] = 0;
 			curr_sg->reserved[2] = 0;
-			curr_sg->chain_indicator = 0x80;
+			curr_sg->chain_indicator = IOACCEL2_CHAIN;
 
 			curr_sg = h->ioaccel2_cmd_sg_list[c->cmdindex];
 		}
@@ -4817,6 +4817,11 @@ static int hpsa_scsi_ioaccel2_queue_command(struct ctlr_info *h,
 			curr_sg++;
 		}
 
+		/*
+		 * Set the last s/g element bit
+		 */
+		(curr_sg - 1)->chain_indicator = IOACCEL2_LAST_SG;
+
 		switch (cmd->sc_data_direction) {
 		case DMA_TO_DEVICE:
 			cp->direction &= ~IOACCEL2_DIRECTION_MASK;
diff --git a/drivers/scsi/hpsa_cmd.h b/drivers/scsi/hpsa_cmd.h
index 078afe448115..ecf15344b55d 100644
--- a/drivers/scsi/hpsa_cmd.h
+++ b/drivers/scsi/hpsa_cmd.h
@@ -516,6 +516,7 @@ struct ioaccel2_sg_element {
 	u8 reserved[3];
 	u8 chain_indicator;
 #define IOACCEL2_CHAIN 0x80
+#define IOACCEL2_LAST_SG 0x40
 };
 
 /*
-- 
2.20.1

[PATCH AUTOSEL 4.14 16/21] platform/x86: mlx-platform: Fix parent device in i2c-mux-reg device registration

[Sasha Levin]

From: Vadim Pasternak <vadimp@mellanox.com>

[ Upstream commit 160da20b254dd4bfc5828f12c208fa831ad4be6c ]

Fix the issue found while running kernel with the option
CONFIG_DEBUG_TEST_DRIVER_REMOVE.
Driver 'mlx-platform' registers 'i2c_mlxcpld' device and then registers
few underlying 'i2c-mux-reg' devices:
	priv->pdev_i2c = platform_device_register_simple("i2c_mlxcpld", nr,
							 NULL, 0);
	...
	for (i = 0; i < ARRAY_SIZE(mlxplat_mux_data); i++) {
		priv->pdev_mux[i] = platform_device_register_resndata(
						&mlxplat_dev->dev,
						"i2c-mux-reg", i, NULL,
						0, &mlxplat_mux_data[i],
						sizeof(mlxplat_mux_data[i]));

But actual parent of "i2c-mux-reg" device is priv->pdev_i2c->dev and
not mlxplat_dev->dev.
Patch fixes parent device parameter in a call to
platform_device_register_resndata() for "i2c-mux-reg".

It solves the race during initialization flow while 'i2c_mlxcpld.1' is
removing after probe, while 'i2c-mux-reg.0' is still in probing flow:
'i2c_mlxcpld.1'	flow:	probe -> remove -> probe.
'i2c-mux-reg.0'	flow:		  probe -> ...

[   12:621096] Registering platform device 'i2c_mlxcpld.1'. Parent at platform
[   12:621117] device: 'i2c_mlxcpld.1': device_add
[   12:621155] bus: 'platform': add device i2c_mlxcpld.1
[   12:621384] Registering platform device 'i2c-mux-reg.0'. Parent at mlxplat
[   12:621395] device: 'i2c-mux-reg.0': device_add
[   12:621425] bus: 'platform': add device i2c-mux-reg.0
[   12:621806] Registering platform device 'i2c-mux-reg.1'. Parent at mlxplat
[   12:621828] device: 'i2c-mux-reg.1': device_add
[   12:621892] bus: 'platform': add device i2c-mux-reg.1
[   12:621906] bus: 'platform': add driver i2c_mlxcpld
[   12:621996] bus: 'platform': driver_probe_device: matched device i2c_mlxcpld.1 with driver i2c_mlxcpld
[   12:622003] bus: 'platform': really_probe: probing driver i2c_mlxcpld with device i2c_mlxcpld.1
[   12:622100] i2c_mlxcpld i2c_mlxcpld.1: no default pinctrl state
[   12:622293] device: 'i2c-1': device_add
[   12:627280] bus: 'i2c': add device i2c-1
[   12:627692] device: 'i2c-1': device_add
[   12.629639] bus: 'platform': add driver i2c-mux-reg
[   12.629718] bus: 'platform': driver_probe_device: matched device i2c-mux-reg.0 with driver i2c-mux-reg
[   12.629723] bus: 'platform': really_probe: probing driver i2c-mux-reg with device i2c-mux-reg.0
[   12.629818] i2c-mux-reg i2c-mux-reg.0: no default pinctrl state
[   12.629981] platform i2c-mux-reg.0: Driver i2c-mux-reg requests probe deferral
[   12.629986] platform i2c-mux-reg.0: Added to deferred list
[   12.629992] bus: 'platform': driver_probe_device: matched device i2c-mux-reg.1 with driver i2c-mux-reg
[   12.629997] bus: 'platform': really_probe: probing driver i2c-mux-reg with device i2c-mux-reg.1
[   12.630091] i2c-mux-reg i2c-mux-reg.1: no default pinctrl state
[   12.630247] platform i2c-mux-reg.1: Driver i2c-mux-reg requests probe deferral
[   12.630252] platform i2c-mux-reg.1: Added to deferred list
[   12.640892] devices_kset: Moving i2c-mux-reg.0 to end of list
[   12.640900] platform i2c-mux-reg.0: Retrying from deferred list
[   12.640911] bus: 'platform': driver_probe_device: matched device i2c-mux-reg.0 with driver i2c-mux-reg
[   12.640919] bus: 'platform': really_probe: probing driver i2c-mux-reg with device i2c-mux-reg.0
[   12.640999] i2c-mux-reg i2c-mux-reg.0: no default pinctrl state
[   12.641177] platform i2c-mux-reg.0: Driver i2c-mux-reg requests probe deferral
[   12.641187] platform i2c-mux-reg.0: Added to deferred list
[   12.641198] devices_kset: Moving i2c-mux-reg.1 to end of list
[   12.641219] platform i2c-mux-reg.1: Retrying from deferred list
[   12.641237] bus: 'platform': driver_probe_device: matched device i2c-mux-reg.1 with driver i2c-mux-reg
[   12.641247] bus: 'platform': really_probe: probing driver i2c-mux-reg with device i2c-mux-reg.1
[   12.641331] i2c-mux-reg i2c-mux-reg.1: no default pinctrl state
[   12.641465] platform i2c-mux-reg.1: Driver i2c-mux-reg requests probe deferral
[   12.641469] platform i2c-mux-reg.1: Added to deferred list
[   12.646427] device: 'i2c-1': device_add
[   12.646647] bus: 'i2c': add device i2c-1
[   12.647104] device: 'i2c-1': device_add
[   12.669231] devices_kset: Moving i2c-mux-reg.0 to end of list
[   12.669240] platform i2c-mux-reg.0: Retrying from deferred list
[   12.669258] bus: 'platform': driver_probe_device: matched device i2c-mux-reg.0 with driver i2c-mux-reg
[   12.669263] bus: 'platform': really_probe: probing driver i2c-mux-reg with device i2c-mux-reg.0
[   12.669343] i2c-mux-reg i2c-mux-reg.0: no default pinctrl state
[   12.669585] device: 'i2c-2': device_add
[   12.669795] bus: 'i2c': add device i2c-2
[   12.670201] device: 'i2c-2': device_add
[   12.671427] i2c i2c-1: Added multiplexed i2c bus 2
[   12.671514] device: 'i2c-3': device_add
[   12.671724] bus: 'i2c': add device i2c-3
[   12.672136] device: 'i2c-3': device_add
[   12.673378] i2c i2c-1: Added multiplexed i2c bus 3
[   12.673472] device: 'i2c-4': device_add
[   12.673676] bus: 'i2c': add device i2c-4
[   12.674060] device: 'i2c-4': device_add
[   12.675861] i2c i2c-1: Added multiplexed i2c bus 4
[   12.675941] device: 'i2c-5': device_add
[   12.676150] bus: 'i2c': add device i2c-5
[   12.676550] device: 'i2c-5': device_add
[   12.678103] i2c i2c-1: Added multiplexed i2c bus 5
[   12.678193] device: 'i2c-6': device_add
[   12.678395] bus: 'i2c': add device i2c-6
[   12.678774] device: 'i2c-6': device_add
[   12.679969] i2c i2c-1: Added multiplexed i2c bus 6
[   12.680065] device: 'i2c-7': device_add
[   12.680275] bus: 'i2c': add device i2c-7
[   12.680913] device: 'i2c-7': device_add
[   12.682506] i2c i2c-1: Added multiplexed i2c bus 7
[   12.682600] device: 'i2c-8': device_add
[   12.682808] bus: 'i2c': add device i2c-8
[   12.683189] device: 'i2c-8': device_add
[   12.683907] device: 'i2c-1': device_unregister
[   12.683945] device: 'i2c-1': device_unregister
[   12.684387] device: 'i2c-1': device_create_release
[   12.684536] bus: 'i2c': remove device i2c-1
[   12.686019] i2c i2c-8: Failed to create compatibility class link
[   12.686086] ------------[ cut here ]------------
[   12.686087] can't create symlink to mux device
[   12.686224] Workqueue: events deferred_probe_work_func
[   12.686135] WARNING: CPU: 7 PID: 436 at drivers/i2c/i2c-mux.c:416 i2c_mux_add_adapter+0x729/0x7d0 [i2c_mux]
[   12.686232] RIP: 0010:i2c_mux_add_adapter+0x729/0x7d0 [i2c_mux]
[   0x190/0x190 [i2c_mux]
[   12.686300]  ? i2c_mux_alloc+0xac/0x110 [i2c_mux]
[   12.686306]  ? i2c_mux_reg_set+0x200/0x200 [i2c_mux_reg]
[   12.686313]  i2c_mux_reg_probe+0x22c/0x731 [i2c_mux_reg]
[   12.686322]  ? i2c_mux_reg_deselect+0x60/0x60 [i2c_mux_reg]
[   12.686346]  platform_drv_probe+0xa8/0x110
[   12.686351]  really_probe+0x185/0x720
[   12.686358]  driver_probe_device+0xdf/0x1f0
...
[   12.686522] i2c i2c-1: Added multiplexed i2c bus 8
[   12.686621] device: 'i2c-9': device_add
[   12.686626] kobject_add_internal failed for i2c-9 (error: -2 parent: i2c-1)
[   12.694729] i2c-core: adapter 'i2c-1-mux (chan_id 8)': can't register device (-2)
[   12.705726] i2c i2c-1: failed to add mux-adapter 8 as bus 9 (error=-2)
[   12.714494] device: 'i2c-8': device_unregister
[   12.714537] device: 'i2c-8': device_unregister

Fixes: 6613d18e9038 ("platform/x86: mlx-platform: Move module from arch/x86")
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/x86/mlx-platform.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/platform/x86/mlx-platform.c b/drivers/platform/x86/mlx-platform.c
index 4f3de2a8c4df..9aced80f31a2 100644
--- a/drivers/platform/x86/mlx-platform.c
+++ b/drivers/platform/x86/mlx-platform.c
@@ -318,7 +318,7 @@ static int __init mlxplat_init(void)
 
 	for (i = 0; i < ARRAY_SIZE(mlxplat_mux_data); i++) {
 		priv->pdev_mux[i] = platform_device_register_resndata(
-						&mlxplat_dev->dev,
+						&priv->pdev_i2c->dev,
 						"i2c-mux-reg", i, NULL,
 						0, &mlxplat_mux_data[i],
 						sizeof(mlxplat_mux_data[i]));
-- 
2.20.1

[PATCH AUTOSEL 4.14 17/21] cpuset: restore sanity to cpuset_cpus_allowed_fallback()

[Sasha Levin]

From: Joel Savitz <jsavitz@redhat.com>

[ Upstream commit d477f8c202d1f0d4791ab1263ca7657bbe5cf79e ]

In the case that a process is constrained by taskset(1) (i.e.
sched_setaffinity(2)) to a subset of available cpus, and all of those are
subsequently offlined, the scheduler will set tsk->cpus_allowed to
the current value of task_cs(tsk)->effective_cpus.

This is done via a call to do_set_cpus_allowed() in the context of
cpuset_cpus_allowed_fallback() made by the scheduler when this case is
detected. This is the only call made to cpuset_cpus_allowed_fallback()
in the latest mainline kernel.

However, this is not sane behavior.

I will demonstrate this on a system running the latest upstream kernel
with the following initial configuration:

	# grep -i cpu /proc/$$/status
	Cpus_allowed:	ffffffff,fffffff
	Cpus_allowed_list:	0-63

(Where cpus 32-63 are provided via smt.)

If we limit our current shell process to cpu2 only and then offline it
and reonline it:

	# taskset -p 4 $$
	pid 2272's current affinity mask: ffffffffffffffff
	pid 2272's new affinity mask: 4

	# echo off > /sys/devices/system/cpu/cpu2/online
	# dmesg | tail -3
	[ 2195.866089] process 2272 (bash) no longer affine to cpu2
	[ 2195.872700] IRQ 114: no longer affine to CPU2
	[ 2195.879128] smpboot: CPU 2 is now offline

	# echo on > /sys/devices/system/cpu/cpu2/online
	# dmesg | tail -1
	[ 2617.043572] smpboot: Booting Node 0 Processor 2 APIC 0x4

We see that our current process now has an affinity mask containing
every cpu available on the system _except_ the one we originally
constrained it to:

	# grep -i cpu /proc/$$/status
	Cpus_allowed:   ffffffff,fffffffb
	Cpus_allowed_list:      0-1,3-63

This is not sane behavior, as the scheduler can now not only place the
process on previously forbidden cpus, it can't even schedule it on
the cpu it was originally constrained to!

Other cases result in even more exotic affinity masks. Take for instance
a process with an affinity mask containing only cpus provided by smt at
the moment that smt is toggled, in a configuration such as the following:

	# taskset -p f000000000 $$
	# grep -i cpu /proc/$$/status
	Cpus_allowed:	000000f0,00000000
	Cpus_allowed_list:	36-39

A double toggle of smt results in the following behavior:

	# echo off > /sys/devices/system/cpu/smt/control
	# echo on > /sys/devices/system/cpu/smt/control
	# grep -i cpus /proc/$$/status
	Cpus_allowed:	ffffff00,ffffffff
	Cpus_allowed_list:	0-31,40-63

This is even less sane than the previous case, as the new affinity mask
excludes all smt-provided cpus with ids less than those that were
previously in the affinity mask, as well as those that were actually in
the mask.

With this patch applied, both of these cases end in the following state:

	# grep -i cpu /proc/$$/status
	Cpus_allowed:	ffffffff,ffffffff
	Cpus_allowed_list:	0-63

The original policy is discarded. Though not ideal, it is the simplest way
to restore sanity to this fallback case without reinventing the cpuset
wheel that rolls down the kernel just fine in cgroup v2. A user who wishes
for the previous affinity mask to be restored in this fallback case can use
that mechanism instead.

This patch modifies scheduler behavior by instead resetting the mask to
task_cs(tsk)->cpus_allowed by default, and cpu_possible mask in legacy
mode. I tested the cases above on both modes.

Note that the scheduler uses this fallback mechanism if and only if
_every_ other valid avenue has been traveled, and it is the last resort
before calling BUG().

Suggested-by: Waiman Long <longman@redhat.com>
Suggested-by: Phil Auld <pauld@redhat.com>
Signed-off-by: Joel Savitz <jsavitz@redhat.com>
Acked-by: Phil Auld <pauld@redhat.com>
Acked-by: Waiman Long <longman@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/cgroup/cpuset.c | 15 ++++++++++++++-
 1 file changed, 14 insertions(+), 1 deletion(-)

diff --git a/kernel/cgroup/cpuset.c b/kernel/cgroup/cpuset.c
index 4657e2924ecb..0a0e1aa11f5e 100644
--- a/kernel/cgroup/cpuset.c
+++ b/kernel/cgroup/cpuset.c
@@ -2436,10 +2436,23 @@ void cpuset_cpus_allowed(struct task_struct *tsk, struct cpumask *pmask)
 	spin_unlock_irqrestore(&callback_lock, flags);
 }
 
+/**
+ * cpuset_cpus_allowed_fallback - final fallback before complete catastrophe.
+ * @tsk: pointer to task_struct with which the scheduler is struggling
+ *
+ * Description: In the case that the scheduler cannot find an allowed cpu in
+ * tsk->cpus_allowed, we fall back to task_cs(tsk)->cpus_allowed. In legacy
+ * mode however, this value is the same as task_cs(tsk)->effective_cpus,
+ * which will not contain a sane cpumask during cases such as cpu hotplugging.
+ * This is the absolute last resort for the scheduler and it is only used if
+ * _every_ other avenue has been traveled.
+ **/
+
 void cpuset_cpus_allowed_fallback(struct task_struct *tsk)
 {
 	rcu_read_lock();
-	do_set_cpus_allowed(tsk, task_cs(tsk)->effective_cpus);
+	do_set_cpus_allowed(tsk, is_in_v2_mode() ?
+		task_cs(tsk)->cpus_allowed : cpu_possible_mask);
 	rcu_read_unlock();
 
 	/*
-- 
2.20.1

[PATCH AUTOSEL 4.14 18/21] scripts/decode_stacktrace.sh: prefix addr2line with $CROSS_COMPILE

[Sasha Levin]

From: Manuel Traut <manut@linutronix.de>

[ Upstream commit c04e32e911653442fc834be6e92e072aeebe01a1 ]

At least for ARM64 kernels compiled with the crosstoolchain from
Debian/stretch or with the toolchain from kernel.org the line number is
not decoded correctly by 'decode_stacktrace.sh':

  $ echo "[  136.513051]  f1+0x0/0xc [kcrash]" | \
    CROSS_COMPILE=/opt/gcc-8.1.0-nolibc/aarch64-linux/bin/aarch64-linux- \
   ./scripts/decode_stacktrace.sh /scratch/linux-arm64/vmlinux \
                                  /scratch/linux-arm64 \
                                  /nfs/debian/lib/modules/4.20.0-devel
  [  136.513051] f1 (/linux/drivers/staging/kcrash/kcrash.c:68) kcrash

If addr2line from the toolchain is used the decoded line number is correct:

  [  136.513051] f1 (/linux/drivers/staging/kcrash/kcrash.c:57) kcrash

Link: http://lkml.kernel.org/r/20190527083425.3763-1-manut@linutronix.de
Signed-off-by: Manuel Traut <manut@linutronix.de>
Acked-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 scripts/decode_stacktrace.sh | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/scripts/decode_stacktrace.sh b/scripts/decode_stacktrace.sh
index 98a7d63a723e..c4a9ddb174bc 100755
--- a/scripts/decode_stacktrace.sh
+++ b/scripts/decode_stacktrace.sh
@@ -66,7 +66,7 @@ parse_symbol() {
 	if [[ "${cache[$module,$address]+isset}" == "isset" ]]; then
 		local code=${cache[$module,$address]}
 	else
-		local code=$(addr2line -i -e "$objfile" "$address")
+		local code=$(${CROSS_COMPILE}addr2line -i -e "$objfile" "$address")
 		cache[$module,$address]=$code
 	fi
 
-- 
2.20.1

[PATCH AUTOSEL 4.14 19/21] mm/mlock.c: change count_mm_mlocked_page_nr return type

[Sasha Levin]

From: swkhack <swkhack@gmail.com>

[ Upstream commit 0874bb49bb21bf24deda853e8bf61b8325e24bcb ]

On a 64-bit machine the value of "vma->vm_end - vma->vm_start" may be
negative when using 32 bit ints and the "count >> PAGE_SHIFT"'s result
will be wrong.  So change the local variable and return value to
unsigned long to fix the problem.

Link: http://lkml.kernel.org/r/20190513023701.83056-1-swkhack@gmail.com
Fixes: 0cf2f6f6dc60 ("mm: mlock: check against vma for actual mlock() size")
Signed-off-by: swkhack <swkhack@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 mm/mlock.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/mm/mlock.c b/mm/mlock.c
index 46af369c13e5..1f9ee86672e8 100644
--- a/mm/mlock.c
+++ b/mm/mlock.c
@@ -629,11 +629,11 @@ static int apply_vma_lock_flags(unsigned long start, size_t len,
  * is also counted.
  * Return value: previously mlocked page counts
  */
-static int count_mm_mlocked_page_nr(struct mm_struct *mm,
+static unsigned long count_mm_mlocked_page_nr(struct mm_struct *mm,
 		unsigned long start, size_t len)
 {
 	struct vm_area_struct *vma;
-	int count = 0;
+	unsigned long count = 0;
 
 	if (mm == NULL)
 		mm = current->mm;
-- 
2.20.1

[PATCH AUTOSEL 4.14 20/21] module: Fix livepatch/ftrace module text permissions race

[Sasha Levin]

From: Josh Poimboeuf <jpoimboe@redhat.com>

[ Upstream commit 9f255b632bf12c4dd7fc31caee89aa991ef75176 ]

It's possible for livepatch and ftrace to be toggling a module's text
permissions at the same time, resulting in the following panic:

  BUG: unable to handle page fault for address: ffffffffc005b1d9
  #PF: supervisor write access in kernel mode
  #PF: error_code(0x0003) - permissions violation
  PGD 3ea0c067 P4D 3ea0c067 PUD 3ea0e067 PMD 3cc13067 PTE 3b8a1061
  Oops: 0003 [#1] PREEMPT SMP PTI
  CPU: 1 PID: 453 Comm: insmod Tainted: G           O  K   5.2.0-rc1-a188339ca5 #1
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-20181126_142135-anatol 04/01/2014
  RIP: 0010:apply_relocate_add+0xbe/0x14c
  Code: fa 0b 74 21 48 83 fa 18 74 38 48 83 fa 0a 75 40 eb 08 48 83 38 00 74 33 eb 53 83 38 00 75 4e 89 08 89 c8 eb 0a 83 38 00 75 43 <89> 08 48 63 c1 48 39 c8 74 2e eb 48 83 38 00 75 32 48 29 c1 89 08
  RSP: 0018:ffffb223c00dbb10 EFLAGS: 00010246
  RAX: ffffffffc005b1d9 RBX: 0000000000000000 RCX: ffffffff8b200060
  RDX: 000000000000000b RSI: 0000004b0000000b RDI: ffff96bdfcd33000
  RBP: ffffb223c00dbb38 R08: ffffffffc005d040 R09: ffffffffc005c1f0
  R10: ffff96bdfcd33c40 R11: ffff96bdfcd33b80 R12: 0000000000000018
  R13: ffffffffc005c1f0 R14: ffffffffc005e708 R15: ffffffff8b2fbc74
  FS:  00007f5f447beba8(0000) GS:ffff96bdff900000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: ffffffffc005b1d9 CR3: 000000003cedc002 CR4: 0000000000360ea0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  Call Trace:
   klp_init_object_loaded+0x10f/0x219
   ? preempt_latency_start+0x21/0x57
   klp_enable_patch+0x662/0x809
   ? virt_to_head_page+0x3a/0x3c
   ? kfree+0x8c/0x126
   patch_init+0x2ed/0x1000 [livepatch_test02]
   ? 0xffffffffc0060000
   do_one_initcall+0x9f/0x1c5
   ? kmem_cache_alloc_trace+0xc4/0xd4
   ? do_init_module+0x27/0x210
   do_init_module+0x5f/0x210
   load_module+0x1c41/0x2290
   ? fsnotify_path+0x3b/0x42
   ? strstarts+0x2b/0x2b
   ? kernel_read+0x58/0x65
   __do_sys_finit_module+0x9f/0xc3
   ? __do_sys_finit_module+0x9f/0xc3
   __x64_sys_finit_module+0x1a/0x1c
   do_syscall_64+0x52/0x61
   entry_SYSCALL_64_after_hwframe+0x44/0xa9

The above panic occurs when loading two modules at the same time with
ftrace enabled, where at least one of the modules is a livepatch module:

CPU0					CPU1
klp_enable_patch()
  klp_init_object_loaded()
    module_disable_ro()
    					ftrace_module_enable()
					  ftrace_arch_code_modify_post_process()
				    	    set_all_modules_text_ro()
      klp_write_object_relocations()
        apply_relocate_add()
	  *patches read-only code* - BOOM

A similar race exists when toggling ftrace while loading a livepatch
module.

Fix it by ensuring that the livepatch and ftrace code patching
operations -- and their respective permissions changes -- are protected
by the text_mutex.

Link: http://lkml.kernel.org/r/ab43d56ab909469ac5d2520c5d944ad6d4abd476.1560474114.git.jpoimboe@redhat.com

Reported-by: Johannes Erdfelt <johannes@erdfelt.com>
Fixes: 444d13ff10fb ("modules: add ro_after_init support")
Acked-by: Jessica Yu <jeyu@kernel.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/livepatch/core.c |  6 ++++++
 kernel/trace/ftrace.c   | 10 +++++++++-
 2 files changed, 15 insertions(+), 1 deletion(-)

diff --git a/kernel/livepatch/core.c b/kernel/livepatch/core.c
index 7c51f065b212..88754e9790f9 100644
--- a/kernel/livepatch/core.c
+++ b/kernel/livepatch/core.c
@@ -30,6 +30,7 @@
 #include <linux/elf.h>
 #include <linux/moduleloader.h>
 #include <linux/completion.h>
+#include <linux/memory.h>
 #include <asm/cacheflush.h>
 #include "core.h"
 #include "patch.h"
@@ -635,16 +636,21 @@ static int klp_init_object_loaded(struct klp_patch *patch,
 	struct klp_func *func;
 	int ret;
 
+	mutex_lock(&text_mutex);
+
 	module_disable_ro(patch->mod);
 	ret = klp_write_object_relocations(patch->mod, obj);
 	if (ret) {
 		module_enable_ro(patch->mod, true);
+		mutex_unlock(&text_mutex);
 		return ret;
 	}
 
 	arch_klp_init_object_loaded(patch, obj);
 	module_enable_ro(patch->mod, true);
 
+	mutex_unlock(&text_mutex);
+
 	klp_for_each_func(obj, func) {
 		ret = klp_find_object_symbol(obj->name, func->old_name,
 					     func->old_sympos,
diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c
index 3e92852c8b23..4e4b88047fcc 100644
--- a/kernel/trace/ftrace.c
+++ b/kernel/trace/ftrace.c
@@ -34,6 +34,7 @@
 #include <linux/hash.h>
 #include <linux/rcupdate.h>
 #include <linux/kprobes.h>
+#include <linux/memory.h>
 
 #include <trace/events/sched.h>
 
@@ -2692,10 +2693,12 @@ static void ftrace_run_update_code(int command)
 {
 	int ret;
 
+	mutex_lock(&text_mutex);
+
 	ret = ftrace_arch_code_modify_prepare();
 	FTRACE_WARN_ON(ret);
 	if (ret)
-		return;
+		goto out_unlock;
 
 	/*
 	 * By default we use stop_machine() to modify the code.
@@ -2707,6 +2710,9 @@ static void ftrace_run_update_code(int command)
 
 	ret = ftrace_arch_code_modify_post_process();
 	FTRACE_WARN_ON(ret);
+
+out_unlock:
+	mutex_unlock(&text_mutex);
 }
 
 static void ftrace_run_modify_code(struct ftrace_ops *ops, int command,
@@ -5791,6 +5797,7 @@ void ftrace_module_enable(struct module *mod)
 	struct ftrace_page *pg;
 
 	mutex_lock(&ftrace_lock);
+	mutex_lock(&text_mutex);
 
 	if (ftrace_disabled)
 		goto out_unlock;
@@ -5851,6 +5858,7 @@ void ftrace_module_enable(struct module *mod)
 		ftrace_arch_code_modify_post_process();
 
  out_unlock:
+	mutex_unlock(&text_mutex);
 	mutex_unlock(&ftrace_lock);
 
 	process_cached_mods(mod->name);
-- 
2.20.1

[PATCH AUTOSEL 4.14 21/21] ftrace: Fix NULL pointer dereference in free_ftrace_func_mapper()

[Sasha Levin]

From: Wei Li <liwei391@huawei.com>

[ Upstream commit 04e03d9a616c19a47178eaca835358610e63a1dd ]

The mapper may be NULL when called from register_ftrace_function_probe()
with probe->data == NULL.

This issue can be reproduced as follow (it may be covered by compiler
optimization sometime):

/ # cat /sys/kernel/debug/tracing/set_ftrace_filter
#### all functions enabled ####
/ # echo foo_bar:dump > /sys/kernel/debug/tracing/set_ftrace_filter
[  206.949100] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
[  206.952402] Mem abort info:
[  206.952819]   ESR = 0x96000006
[  206.955326]   Exception class = DABT (current EL), IL = 32 bits
[  206.955844]   SET = 0, FnV = 0
[  206.956272]   EA = 0, S1PTW = 0
[  206.956652] Data abort info:
[  206.957320]   ISV = 0, ISS = 0x00000006
[  206.959271]   CM = 0, WnR = 0
[  206.959938] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000419f3a000
[  206.960483] [0000000000000000] pgd=0000000411a87003, pud=0000000411a83003, pmd=0000000000000000
[  206.964953] Internal error: Oops: 96000006 [#1] SMP
[  206.971122] Dumping ftrace buffer:
[  206.973677]    (ftrace buffer empty)
[  206.975258] Modules linked in:
[  206.976631] Process sh (pid: 281, stack limit = 0x(____ptrval____))
[  206.978449] CPU: 10 PID: 281 Comm: sh Not tainted 5.2.0-rc1+ #17
[  206.978955] Hardware name: linux,dummy-virt (DT)
[  206.979883] pstate: 60000005 (nZCv daif -PAN -UAO)
[  206.980499] pc : free_ftrace_func_mapper+0x2c/0x118
[  206.980874] lr : ftrace_count_free+0x68/0x80
[  206.982539] sp : ffff0000182f3ab0
[  206.983102] x29: ffff0000182f3ab0 x28: ffff8003d0ec1700
[  206.983632] x27: ffff000013054b40 x26: 0000000000000001
[  206.984000] x25: ffff00001385f000 x24: 0000000000000000
[  206.984394] x23: ffff000013453000 x22: ffff000013054000
[  206.984775] x21: 0000000000000000 x20: ffff00001385fe28
[  206.986575] x19: ffff000013872c30 x18: 0000000000000000
[  206.987111] x17: 0000000000000000 x16: 0000000000000000
[  206.987491] x15: ffffffffffffffb0 x14: 0000000000000000
[  206.987850] x13: 000000000017430e x12: 0000000000000580
[  206.988251] x11: 0000000000000000 x10: cccccccccccccccc
[  206.988740] x9 : 0000000000000000 x8 : ffff000013917550
[  206.990198] x7 : ffff000012fac2e8 x6 : ffff000012fac000
[  206.991008] x5 : ffff0000103da588 x4 : 0000000000000001
[  206.991395] x3 : 0000000000000001 x2 : ffff000013872a28
[  206.991771] x1 : 0000000000000000 x0 : 0000000000000000
[  206.992557] Call trace:
[  206.993101]  free_ftrace_func_mapper+0x2c/0x118
[  206.994827]  ftrace_count_free+0x68/0x80
[  206.995238]  release_probe+0xfc/0x1d0
[  206.995555]  register_ftrace_function_probe+0x4a8/0x868
[  206.995923]  ftrace_trace_probe_callback.isra.4+0xb8/0x180
[  206.996330]  ftrace_dump_callback+0x50/0x70
[  206.996663]  ftrace_regex_write.isra.29+0x290/0x3a8
[  206.997157]  ftrace_filter_write+0x44/0x60
[  206.998971]  __vfs_write+0x64/0xf0
[  206.999285]  vfs_write+0x14c/0x2f0
[  206.999591]  ksys_write+0xbc/0x1b0
[  206.999888]  __arm64_sys_write+0x3c/0x58
[  207.000246]  el0_svc_common.constprop.0+0x408/0x5f0
[  207.000607]  el0_svc_handler+0x144/0x1c8
[  207.000916]  el0_svc+0x8/0xc
[  207.003699] Code: aa0003f8 a9025bf5 aa0103f5 f946ea80 (f9400303)
[  207.008388] ---[ end trace 7b6d11b5f542bdf1 ]---
[  207.010126] Kernel panic - not syncing: Fatal exception
[  207.011322] SMP: stopping secondary CPUs
[  207.013956] Dumping ftrace buffer:
[  207.014595]    (ftrace buffer empty)
[  207.015632] Kernel Offset: disabled
[  207.017187] CPU features: 0x002,20006008
[  207.017985] Memory Limit: none
[  207.019825] ---[ end Kernel panic - not syncing: Fatal exception ]---

Link: http://lkml.kernel.org/r/20190606031754.10798-1-liwei391@huawei.com

Signed-off-by: Wei Li <liwei391@huawei.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/trace/ftrace.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c
index 4e4b88047fcc..ff3c8ca907c4 100644
--- a/kernel/trace/ftrace.c
+++ b/kernel/trace/ftrace.c
@@ -4286,10 +4286,13 @@ void free_ftrace_func_mapper(struct ftrace_func_mapper *mapper,
 	struct ftrace_func_entry *entry;
 	struct ftrace_func_map *map;
 	struct hlist_head *hhd;
-	int size = 1 << mapper->hash.size_bits;
-	int i;
+	int size, i;
+
+	if (!mapper)
+		return;
 
 	if (free_func && mapper->hash.count) {
+		size = 1 << mapper->hash.size_bits;
 		for (i = 0; i < size; i++) {
 			hhd = &mapper->hash.buckets[i];
 			hlist_for_each_entry(entry, hhd, hlist) {
-- 
2.20.1