From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Sergej Benilov <sergej.benilov@googlemail.com>,
"David S . Miller" <davem@davemloft.net>,
Sasha Levin <sashal@kernel.org>,
netdev@vger.kernel.org
Subject: [PATCH AUTOSEL 5.1 20/39] sis900: fix TX completion
Date: Tue, 2 Jul 2019 22:14:55 -0400 [thread overview]
Message-ID: <20190703021514.17727-20-sashal@kernel.org> (raw)
In-Reply-To: <20190703021514.17727-1-sashal@kernel.org>
From: Sergej Benilov <sergej.benilov@googlemail.com>
[ Upstream commit 8ac8a01092b2added0749ef937037bf1912e13e3 ]
Since commit 605ad7f184b60cfaacbc038aa6c55ee68dee3c89 "tcp: refine TSO autosizing",
outbound throughput is dramatically reduced for some connections, as sis900
is doing TX completion within idle states only.
Make TX completion happen after every transmitted packet.
Test:
netperf
before patch:
> netperf -H remote -l -2000000 -- -s 1000000
MIGRATED TCP STREAM TEST from 0.0.0.0 () port 0 AF_INET to 95.223.112.76 () port 0 AF_INET : demo
Recv Send Send
Socket Socket Message Elapsed
Size Size Size Time Throughput
bytes bytes bytes secs. 10^6bits/sec
87380 327680 327680 253.44 0.06
after patch:
> netperf -H remote -l -10000000 -- -s 1000000
MIGRATED TCP STREAM TEST from 0.0.0.0 () port 0 AF_INET to 95.223.112.76 () port 0 AF_INET : demo
Recv Send Send
Socket Socket Message Elapsed
Size Size Size Time Throughput
bytes bytes bytes secs. 10^6bits/sec
87380 327680 327680 5.38 14.89
Thx to Dave Miller and Eric Dumazet for helpful hints
Signed-off-by: Sergej Benilov <sergej.benilov@googlemail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/sis/sis900.c | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/net/ethernet/sis/sis900.c b/drivers/net/ethernet/sis/sis900.c
index 67f9bb6e941b..9b036c857b1d 100644
--- a/drivers/net/ethernet/sis/sis900.c
+++ b/drivers/net/ethernet/sis/sis900.c
@@ -1057,7 +1057,7 @@ sis900_open(struct net_device *net_dev)
sis900_set_mode(sis_priv, HW_SPEED_10_MBPS, FDX_CAPABLE_HALF_SELECTED);
/* Enable all known interrupts by setting the interrupt mask. */
- sw32(imr, RxSOVR | RxORN | RxERR | RxOK | TxURN | TxERR | TxIDLE);
+ sw32(imr, RxSOVR | RxORN | RxERR | RxOK | TxURN | TxERR | TxIDLE | TxDESC);
sw32(cr, RxENA | sr32(cr));
sw32(ier, IE);
@@ -1578,7 +1578,7 @@ static void sis900_tx_timeout(struct net_device *net_dev)
sw32(txdp, sis_priv->tx_ring_dma);
/* Enable all known interrupts by setting the interrupt mask. */
- sw32(imr, RxSOVR | RxORN | RxERR | RxOK | TxURN | TxERR | TxIDLE);
+ sw32(imr, RxSOVR | RxORN | RxERR | RxOK | TxURN | TxERR | TxIDLE | TxDESC);
}
/**
@@ -1618,7 +1618,7 @@ sis900_start_xmit(struct sk_buff *skb, struct net_device *net_dev)
spin_unlock_irqrestore(&sis_priv->lock, flags);
return NETDEV_TX_OK;
}
- sis_priv->tx_ring[entry].cmdsts = (OWN | skb->len);
+ sis_priv->tx_ring[entry].cmdsts = (OWN | INTR | skb->len);
sw32(cr, TxENA | sr32(cr));
sis_priv->cur_tx ++;
@@ -1674,7 +1674,7 @@ static irqreturn_t sis900_interrupt(int irq, void *dev_instance)
do {
status = sr32(isr);
- if ((status & (HIBERR|TxURN|TxERR|TxIDLE|RxORN|RxERR|RxOK)) == 0)
+ if ((status & (HIBERR|TxURN|TxERR|TxIDLE|TxDESC|RxORN|RxERR|RxOK)) == 0)
/* nothing intresting happened */
break;
handled = 1;
@@ -1684,7 +1684,7 @@ static irqreturn_t sis900_interrupt(int irq, void *dev_instance)
/* Rx interrupt */
sis900_rx(net_dev);
- if (status & (TxURN | TxERR | TxIDLE))
+ if (status & (TxURN | TxERR | TxIDLE | TxDESC))
/* Tx interrupt */
sis900_finish_xmit(net_dev);
@@ -1896,8 +1896,8 @@ static void sis900_finish_xmit (struct net_device *net_dev)
if (tx_status & OWN) {
/* The packet is not transmitted yet (owned by hardware) !
- * Note: the interrupt is generated only when Tx Machine
- * is idle, so this is an almost impossible case */
+ * Note: this is an almost impossible condition
+ * in case of TxDESC ('descriptor interrupt') */
break;
}
@@ -2473,7 +2473,7 @@ static int sis900_resume(struct pci_dev *pci_dev)
sis900_set_mode(sis_priv, HW_SPEED_10_MBPS, FDX_CAPABLE_HALF_SELECTED);
/* Enable all known interrupts by setting the interrupt mask. */
- sw32(imr, RxSOVR | RxORN | RxERR | RxOK | TxURN | TxERR | TxIDLE);
+ sw32(imr, RxSOVR | RxORN | RxERR | RxOK | TxURN | TxERR | TxIDLE | TxDESC);
sw32(cr, RxENA | sr32(cr));
sw32(ier, IE);
--
2.20.1
next prev parent reply other threads:[~2019-07-03 2:22 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-03 2:14 [PATCH AUTOSEL 5.1 01/39] ARM: dts: meson8: fix GPU interrupts and drop an undocumented property Sasha Levin
2019-07-03 2:14 ` [PATCH AUTOSEL 5.1 02/39] ARM: dts: meson8b: fix the operating voltage of the Mali GPU Sasha Levin
2019-07-03 2:14 ` [PATCH AUTOSEL 5.1 03/39] idr: Fix idr_get_next race with idr_remove Sasha Levin
2019-07-03 2:14 ` [PATCH AUTOSEL 5.1 04/39] irqchip/irq-csky-mpintc: Support auto irq deliver to all cpus Sasha Levin
2019-07-03 2:14 ` [PATCH AUTOSEL 5.1 05/39] irqchip/gic-v3-its: Fix command queue pointer comparison bug Sasha Levin
2019-07-03 2:14 ` [PATCH AUTOSEL 5.1 06/39] clk: ti: clkctrl: Fix returning uninitialized data Sasha Levin
2019-07-03 2:14 ` [PATCH AUTOSEL 5.1 07/39] efi/bgrt: Drop BGRT status field reserved bits check Sasha Levin
2019-07-03 2:14 ` [PATCH AUTOSEL 5.1 08/39] arm64: dts: ls1028a: Fix CPU idle fail Sasha Levin
2019-07-11 5:04 ` Ran Wang
2019-07-11 6:43 ` Greg KH
2019-07-03 2:14 ` [PATCH AUTOSEL 5.1 09/39] selftests/powerpc: Add test of fork with mapping above 512TB Sasha Levin
2019-07-03 2:14 ` [PATCH AUTOSEL 5.1 10/39] perf/core: Fix perf_sample_regs_user() mm check Sasha Levin
2019-07-03 2:14 ` [PATCH AUTOSEL 5.1 11/39] ARM: dts: gemini Fix up DNS-313 compatible string Sasha Levin
2019-07-03 2:14 ` [PATCH AUTOSEL 5.1 12/39] ARM: omap2: remove incorrect __init annotation Sasha Levin
2019-07-03 2:14 ` [PATCH AUTOSEL 5.1 13/39] afs: Fix uninitialised spinlock afs_volume::cb_break_lock Sasha Levin
2019-07-03 2:14 ` [PATCH AUTOSEL 5.1 14/39] x86/efi: fix a -Wtype-limits compilation warning Sasha Levin
2019-07-03 2:14 ` [PATCH AUTOSEL 5.1 15/39] x86/apic: Fix integer overflow on 10 bit left shift of cpu_khz Sasha Levin
2019-07-03 2:14 ` [PATCH AUTOSEL 5.1 16/39] be2net: fix link failure after ethtool offline test Sasha Levin
2019-07-03 2:14 ` [PATCH AUTOSEL 5.1 17/39] ppp: mppe: Add softdep to arc4 Sasha Levin
2019-07-03 2:14 ` [PATCH AUTOSEL 5.1 18/39] net: stmmac: fixed new system time seconds value calculation Sasha Levin
2019-07-03 2:14 ` [PATCH AUTOSEL 5.1 19/39] net: stmmac: set IC bit when transmitting frames with HW timestamp Sasha Levin
2019-07-03 2:14 ` Sasha Levin [this message]
2019-07-03 2:14 ` [PATCH AUTOSEL 5.1 21/39] ARM: dts: imx6ul: fix PWM[1-4] interrupts Sasha Levin
2019-07-03 2:14 ` [PATCH AUTOSEL 5.1 22/39] qmi_wwan: Fix out-of-bounds read Sasha Levin
2019-07-03 2:14 ` [PATCH AUTOSEL 5.1 23/39] pinctrl: mcp23s08: Fix add_data and irqchip_add_nested call order Sasha Levin
2019-07-03 2:14 ` [PATCH AUTOSEL 5.1 24/39] pinctrl: ocelot: fix gpio direction for pins after 31 Sasha Levin
2019-07-03 2:15 ` [PATCH AUTOSEL 5.1 25/39] pinctrl: ocelot: fix pinmuxing " Sasha Levin
2019-07-03 2:15 ` [PATCH AUTOSEL 5.1 26/39] dm table: don't copy from a NULL pointer in realloc_argv() Sasha Levin
2019-07-03 2:15 ` [PATCH AUTOSEL 5.1 27/39] dm verity: use message limit for data block corruption message Sasha Levin
2019-07-03 2:15 ` [PATCH AUTOSEL 5.1 28/39] x86/boot/64: Fix crash if kernel image crosses page table boundary Sasha Levin
2019-07-03 2:15 ` [PATCH AUTOSEL 5.1 29/39] x86/boot/64: Add missing fixup_pointer() for next_early_pgt access Sasha Levin
2019-07-03 2:15 ` [PATCH AUTOSEL 5.1 30/39] HID: chicony: add another quirk for PixArt mouse Sasha Levin
2019-07-03 2:15 ` [PATCH AUTOSEL 5.1 31/39] HID: uclogic: Add support for Huion HS64 tablet Sasha Levin
2019-07-03 2:15 ` [PATCH AUTOSEL 5.1 32/39] HID: multitouch: Add pointstick support for ALPS Touchpad Sasha Levin
2019-07-03 2:15 ` [PATCH AUTOSEL 5.1 33/39] pinctrl: mediatek: Ignore interrupts that are wake only during resume Sasha Levin
2019-07-03 2:15 ` [PATCH AUTOSEL 5.1 34/39] net: aquantia: fix vlans not working over bridged network Sasha Levin
2019-07-03 2:15 ` [PATCH AUTOSEL 5.1 35/39] cpu/hotplug: Fix out-of-bounds read when setting fail state Sasha Levin
2019-07-03 2:15 ` [PATCH AUTOSEL 5.1 36/39] pinctrl: mediatek: Update cur_mask in mask/mask ops Sasha Levin
2019-07-03 2:15 ` [PATCH AUTOSEL 5.1 37/39] mm/oom_kill.c: fix uninitialized oc->constraint Sasha Levin
2019-07-03 2:15 ` [PATCH AUTOSEL 5.1 38/39] fork,memcg: alloc_thread_stack_node needs to set tsk->stack Sasha Levin
2019-07-03 2:15 ` [PATCH AUTOSEL 5.1 39/39] linux/kernel.h: fix overflow for DIV_ROUND_UP_ULL Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190703021514.17727-20-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=davem@davemloft.net \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=sergej.benilov@googlemail.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).