From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Emil Renner Berthing <kernel@esmil.dk>,
Mark Brown <broonie@kernel.org>, Sasha Levin <sashal@kernel.org>,
linux-spi@vger.kernel.org, linux-rockchip@lists.infradead.org
Subject: [PATCH AUTOSEL 5.2 007/249] spi: rockchip: turn down tx dma bursts
Date: Mon, 15 Jul 2019 09:31:48 -0400 [thread overview]
Message-ID: <20190715133550.1772-7-sashal@kernel.org> (raw)
In-Reply-To: <20190715133550.1772-1-sashal@kernel.org>
From: Emil Renner Berthing <kernel@esmil.dk>
[ Upstream commit 47300728fb213486a830565d2af49da967c9d16a ]
This fixes tx and bi-directional dma transfers on rk3399-gru-kevin.
It seems the SPI fifo must have room for 2 bursts when the dma_tx_req
signal is generated or it might skip some words. This in turn makes
the rx dma channel never complete for bi-directional transfers.
Fix it by setting tx burst length to fifo_len / 4 and the dma
watermark to fifo_len / 2.
However the rk3399 TRM says (sic):
"DMAC support incrementing-address burst and fixed-address burst. But in
the case of access SPI and UART at byte or halfword size, DMAC only
support fixed-address burst and the address must be aligned to word."
So this relies on fifo_len being a multiple of 16 such that the
burst length (= fifo_len / 4) is a multiple of 4 and the addresses
will be word-aligned.
Fixes: dcfc861d24ec ("spi: rockchip: adjust dma watermark and burstlen")
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/spi/spi-rockchip.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/spi/spi-rockchip.c b/drivers/spi/spi-rockchip.c
index 9b91188a85f9..2cc6d9951b52 100644
--- a/drivers/spi/spi-rockchip.c
+++ b/drivers/spi/spi-rockchip.c
@@ -417,7 +417,7 @@ static int rockchip_spi_prepare_dma(struct rockchip_spi *rs,
.direction = DMA_MEM_TO_DEV,
.dst_addr = rs->dma_addr_tx,
.dst_addr_width = rs->n_bytes,
- .dst_maxburst = rs->fifo_len / 2,
+ .dst_maxburst = rs->fifo_len / 4,
};
dmaengine_slave_config(master->dma_tx, &txconf);
@@ -518,7 +518,7 @@ static void rockchip_spi_config(struct rockchip_spi *rs,
else
writel_relaxed(rs->fifo_len / 2 - 1, rs->regs + ROCKCHIP_SPI_RXFTLR);
- writel_relaxed(rs->fifo_len / 2 - 1, rs->regs + ROCKCHIP_SPI_DMATDLR);
+ writel_relaxed(rs->fifo_len / 2, rs->regs + ROCKCHIP_SPI_DMATDLR);
writel_relaxed(0, rs->regs + ROCKCHIP_SPI_DMARDLR);
writel_relaxed(dmacr, rs->regs + ROCKCHIP_SPI_DMACR);
--
2.20.1
next prev parent reply other threads:[~2019-07-15 13:36 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-15 13:31 [PATCH AUTOSEL 5.2 001/249] ath10k: Check tx_stats before use it Sasha Levin
2019-07-15 13:31 ` [PATCH AUTOSEL 5.2 002/249] ath10k: htt: don't use txdone_fifo with SDIO Sasha Levin
2019-07-15 13:31 ` [PATCH AUTOSEL 5.2 003/249] ath10k: fix incorrect multicast/broadcast rate setting Sasha Levin
2019-07-15 13:31 ` [PATCH AUTOSEL 5.2 004/249] ath9k: Don't trust TX status TID number when reporting airtime Sasha Levin
2019-07-15 13:31 ` [PATCH AUTOSEL 5.2 005/249] wil6210: fix potential out-of-bounds read Sasha Levin
2019-07-15 13:31 ` [PATCH AUTOSEL 5.2 006/249] ath10k: Do not send probe response template for mesh Sasha Levin
2019-07-15 13:31 ` Sasha Levin [this message]
2019-07-15 13:31 ` [PATCH AUTOSEL 5.2 008/249] ath9k: Check for errors when reading SREV register Sasha Levin
2019-07-15 13:31 ` [PATCH AUTOSEL 5.2 009/249] ath10k: Fix the wrong value of enums for wmi tlv stats id Sasha Levin
2019-07-15 13:31 ` [PATCH AUTOSEL 5.2 010/249] wil6210: fix missed MISC mbox interrupt Sasha Levin
2019-07-15 13:31 ` [PATCH AUTOSEL 5.2 011/249] ath6kl: add some bounds checking Sasha Levin
2019-07-15 13:31 ` [PATCH AUTOSEL 5.2 012/249] ath10k: add peer id check in ath10k_peer_find_by_id Sasha Levin
2019-07-15 13:31 ` [PATCH AUTOSEL 5.2 013/249] x86/tsc: Use CPUID.0x16 to calculate missing crystal frequency Sasha Levin
2019-07-15 13:31 ` [PATCH AUTOSEL 5.2 014/249] wil6210: fix spurious interrupts in 3-msi Sasha Levin
2019-07-15 13:31 ` [PATCH AUTOSEL 5.2 015/249] ath: DFS JP domain W56 fixed pulse type 3 RADAR detection Sasha Levin
2019-07-15 13:31 ` [PATCH AUTOSEL 5.2 016/249] ath10k: Fix encoding for protected management frames Sasha Levin
2019-07-15 13:31 ` [PATCH AUTOSEL 5.2 017/249] regmap: debugfs: Fix memory leak in regmap_debugfs_init Sasha Levin
2019-07-15 13:31 ` [PATCH AUTOSEL 5.2 018/249] batman-adv: fix for leaked TVLV handler Sasha Levin
2019-07-15 13:32 ` [PATCH AUTOSEL 5.2 019/249] media: dvb: usb: fix use after free in dvb_usb_device_exit Sasha Levin
2019-07-15 13:32 ` [PATCH AUTOSEL 5.2 020/249] media: spi: IR LED: add missing of table registration Sasha Levin
2019-07-15 13:32 ` [PATCH AUTOSEL 5.2 021/249] crypto: talitos - fix skcipher failure due to wrong output IV Sasha Levin
2019-07-15 13:32 ` [PATCH AUTOSEL 5.2 022/249] media: ov7740: avoid invalid framesize setting Sasha Levin
2019-07-15 13:32 ` [PATCH AUTOSEL 5.2 023/249] media: marvell-ccic: fix DMA s/g desc number calculation Sasha Levin
2019-07-15 13:32 ` [PATCH AUTOSEL 5.2 024/249] selftests/bpf: adjust verifier scale test Sasha Levin
-- strict thread matches above, loose matches on Subject: below --
2019-07-15 13:42 [PATCH AUTOSEL 5.2 001/249] ath10k: Check tx_stats before use it Sasha Levin
2019-07-15 13:42 ` [PATCH AUTOSEL 5.2 007/249] spi: rockchip: turn down tx dma bursts Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190715133550.1772-7-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=broonie@kernel.org \
--cc=kernel@esmil.dk \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=linux-spi@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).