From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
stable@vger.kernel.org, Robert Hodaszi <Robert.Hodaszi@digi.com>,
Thomas Gleixner <tglx@linutronix.de>,
Marc Zyngier <marc.zyngier@arm.com>
Subject: [PATCH 5.2 07/21] genirq: Delay deactivation in free_irq()
Date: Thu, 18 Jul 2019 12:01:25 +0900 [thread overview]
Message-ID: <20190718030031.976038290@linuxfoundation.org> (raw)
In-Reply-To: <20190718030030.456918453@linuxfoundation.org>
From: Thomas Gleixner <tglx@linutronix.de>
commit 4001d8e8762f57d418b66e4e668601791900a1dd upstream.
When interrupts are shutdown, they are immediately deactivated in the
irqdomain hierarchy. While this looks obviously correct there is a subtle
issue:
There might be an interrupt in flight when free_irq() is invoking the
shutdown. This is properly handled at the irq descriptor / primary handler
level, but the deactivation might completely disable resources which are
required to acknowledge the interrupt.
Split the shutdown code and deactivate the interrupt after synchronization
in free_irq(). Fixup all other usage sites where this is not an issue to
invoke the combined shutdown_and_deactivate() function instead.
This still might be an issue if the interrupt in flight servicing is
delayed on a remote CPU beyond the invocation of synchronize_irq(), but
that cannot be handled at that level and needs to be handled in the
synchronize_irq() context.
Fixes: f8264e34965a ("irqdomain: Introduce new interfaces to support hierarchy irqdomains")
Reported-by: Robert Hodaszi <Robert.Hodaszi@digi.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Link: https://lkml.kernel.org/r/20190628111440.098196390@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
kernel/irq/autoprobe.c | 6 +++---
kernel/irq/chip.c | 6 ++++++
kernel/irq/cpuhotplug.c | 2 +-
kernel/irq/internals.h | 1 +
kernel/irq/manage.c | 12 +++++++++++-
5 files changed, 22 insertions(+), 5 deletions(-)
--- a/kernel/irq/autoprobe.c
+++ b/kernel/irq/autoprobe.c
@@ -90,7 +90,7 @@ unsigned long probe_irq_on(void)
/* It triggered already - consider it spurious. */
if (!(desc->istate & IRQS_WAITING)) {
desc->istate &= ~IRQS_AUTODETECT;
- irq_shutdown(desc);
+ irq_shutdown_and_deactivate(desc);
} else
if (i < 32)
mask |= 1 << i;
@@ -127,7 +127,7 @@ unsigned int probe_irq_mask(unsigned lon
mask |= 1 << i;
desc->istate &= ~IRQS_AUTODETECT;
- irq_shutdown(desc);
+ irq_shutdown_and_deactivate(desc);
}
raw_spin_unlock_irq(&desc->lock);
}
@@ -169,7 +169,7 @@ int probe_irq_off(unsigned long val)
nr_of_irqs++;
}
desc->istate &= ~IRQS_AUTODETECT;
- irq_shutdown(desc);
+ irq_shutdown_and_deactivate(desc);
}
raw_spin_unlock_irq(&desc->lock);
}
--- a/kernel/irq/chip.c
+++ b/kernel/irq/chip.c
@@ -314,6 +314,12 @@ void irq_shutdown(struct irq_desc *desc)
}
irq_state_clr_started(desc);
}
+}
+
+
+void irq_shutdown_and_deactivate(struct irq_desc *desc)
+{
+ irq_shutdown(desc);
/*
* This must be called even if the interrupt was never started up,
* because the activation can happen before the interrupt is
--- a/kernel/irq/cpuhotplug.c
+++ b/kernel/irq/cpuhotplug.c
@@ -116,7 +116,7 @@ static bool migrate_one_irq(struct irq_d
*/
if (irqd_affinity_is_managed(d)) {
irqd_set_managed_shutdown(d);
- irq_shutdown(desc);
+ irq_shutdown_and_deactivate(desc);
return false;
}
affinity = cpu_online_mask;
--- a/kernel/irq/internals.h
+++ b/kernel/irq/internals.h
@@ -82,6 +82,7 @@ extern int irq_activate_and_startup(stru
extern int irq_startup(struct irq_desc *desc, bool resend, bool force);
extern void irq_shutdown(struct irq_desc *desc);
+extern void irq_shutdown_and_deactivate(struct irq_desc *desc);
extern void irq_enable(struct irq_desc *desc);
extern void irq_disable(struct irq_desc *desc);
extern void irq_percpu_enable(struct irq_desc *desc, unsigned int cpu);
--- a/kernel/irq/manage.c
+++ b/kernel/irq/manage.c
@@ -13,6 +13,7 @@
#include <linux/module.h>
#include <linux/random.h>
#include <linux/interrupt.h>
+#include <linux/irqdomain.h>
#include <linux/slab.h>
#include <linux/sched.h>
#include <linux/sched/rt.h>
@@ -1699,6 +1700,7 @@ static struct irqaction *__free_irq(stru
/* If this was the last handler, shut down the IRQ line: */
if (!desc->action) {
irq_settings_clr_disable_unlazy(desc);
+ /* Only shutdown. Deactivate after synchronize_hardirq() */
irq_shutdown(desc);
}
@@ -1768,6 +1770,14 @@ static struct irqaction *__free_irq(stru
* require it to deallocate resources over the slow bus.
*/
chip_bus_lock(desc);
+ /*
+ * There is no interrupt on the fly anymore. Deactivate it
+ * completely.
+ */
+ raw_spin_lock_irqsave(&desc->lock, flags);
+ irq_domain_deactivate_irq(&desc->irq_data);
+ raw_spin_unlock_irqrestore(&desc->lock, flags);
+
irq_release_resources(desc);
chip_bus_sync_unlock(desc);
irq_remove_timings(desc);
@@ -1855,7 +1865,7 @@ static const void *__cleanup_nmi(unsigne
}
irq_settings_clr_disable_unlazy(desc);
- irq_shutdown(desc);
+ irq_shutdown_and_deactivate(desc);
irq_release_resources(desc);
next prev parent reply other threads:[~2019-07-18 3:26 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-18 3:01 [PATCH 5.2 00/21] 5.2.2-stable review Greg Kroah-Hartman
2019-07-18 3:01 ` [PATCH 5.2 01/21] Revert "e1000e: fix cyclic resets at link up with active tx" Greg Kroah-Hartman
2019-07-18 3:01 ` [PATCH 5.2 02/21] e1000e: start network tx queue only when link is up Greg Kroah-Hartman
2019-07-18 3:01 ` [PATCH 5.2 03/21] Input: synaptics - enable SMBUS on T480 thinkpad trackpad Greg Kroah-Hartman
2019-07-18 3:01 ` [PATCH 5.2 04/21] nilfs2: do not use unexported cpu_to_le32()/le32_to_cpu() in uapi header Greg Kroah-Hartman
2019-07-18 3:01 ` [PATCH 5.2 05/21] drivers: base: cacheinfo: Ensure cpu hotplug work is done before Intel RDT Greg Kroah-Hartman
2019-07-18 3:01 ` [PATCH 5.2 06/21] firmware: improve LSM/IMA security behaviour Greg Kroah-Hartman
2019-07-18 3:01 ` Greg Kroah-Hartman [this message]
2019-07-18 3:01 ` [PATCH 5.2 08/21] genirq: Fix misleading synchronize_irq() documentation Greg Kroah-Hartman
2019-07-18 3:01 ` [PATCH 5.2 09/21] genirq: Add optional hardware synchronization for shutdown Greg Kroah-Hartman
2019-07-18 3:01 ` [PATCH 5.2 10/21] x86/ioapic: Implement irq_get_irqchip_state() callback Greg Kroah-Hartman
2019-07-18 3:01 ` [PATCH 5.2 11/21] x86/irq: Handle spurious interrupt after shutdown gracefully Greg Kroah-Hartman
2019-07-18 3:01 ` [PATCH 5.2 12/21] x86/irq: Seperate unused system vectors from spurious entry again Greg Kroah-Hartman
2019-07-18 3:01 ` [PATCH 5.2 13/21] ARC: hide unused function unw_hdr_alloc Greg Kroah-Hartman
2019-07-18 3:01 ` [PATCH 5.2 14/21] s390/ipl: Fix detection of has_secure attribute Greg Kroah-Hartman
2019-07-18 3:01 ` [PATCH 5.2 15/21] s390: fix stfle zero padding Greg Kroah-Hartman
2019-07-18 3:01 ` [PATCH 5.2 16/21] s390/qdio: (re-)initialize tiqdio list entries Greg Kroah-Hartman
2019-07-18 3:01 ` [PATCH 5.2 17/21] s390/qdio: dont touch the dsci in tiqdio_add_input_queues() Greg Kroah-Hartman
2019-07-18 3:01 ` [PATCH 5.2 18/21] crypto: talitos - move struct talitos_edesc into talitos.h Greg Kroah-Hartman
2019-07-18 3:01 ` [PATCH 5.2 19/21] crypto: talitos - fix hash on SEC1 Greg Kroah-Hartman
2019-07-18 3:01 ` [PATCH 5.2 20/21] crypto/NX: Set receive window credits to max number of CRBs in RxFIFO Greg Kroah-Hartman
2019-07-18 3:01 ` [PATCH 5.2 21/21] x86/entry/32: Fix ENDPROC of common_spurious Greg Kroah-Hartman
2019-07-18 9:21 ` [PATCH 5.2 00/21] 5.2.2-stable review Jon Hunter
2019-07-18 9:37 ` Greg Kroah-Hartman
2019-07-18 12:42 ` Naresh Kamboju
2019-07-19 3:46 ` Greg Kroah-Hartman
2019-07-18 19:49 ` Guenter Roeck
2019-07-19 3:46 ` Greg Kroah-Hartman
2019-07-18 20:58 ` Kelsey Skunberg
2019-07-19 3:47 ` Greg Kroah-Hartman
2019-07-19 17:33 ` kernelci.org bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190718030031.976038290@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=Robert.Hodaszi@digi.com \
--cc=linux-kernel@vger.kernel.org \
--cc=marc.zyngier@arm.com \
--cc=stable@vger.kernel.org \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).