From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Geert Uytterhoeven <geert+renesas@glider.be>,
Eugeniu Rosca <erosca@de.adit-jv.com>,
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Sasha Levin <sashal@kernel.org>,
linux-serial@vger.kernel.org
Subject: [PATCH AUTOSEL 4.14 40/60] serial: sh-sci: Fix TX DMA buffer flushing and workqueue races
Date: Fri, 19 Jul 2019 00:10:49 -0400 [thread overview]
Message-ID: <20190719041109.18262-40-sashal@kernel.org> (raw)
In-Reply-To: <20190719041109.18262-1-sashal@kernel.org>
From: Geert Uytterhoeven <geert+renesas@glider.be>
[ Upstream commit 8493eab02608b0e82f67b892aa72882e510c31d0 ]
When uart_flush_buffer() is called, the .flush_buffer() callback zeroes
the tx_dma_len field. This may race with the work queue function
handling transmit DMA requests:
1. If the buffer is flushed before the first DMA API call,
dmaengine_prep_slave_single() may be called with a zero length,
causing the DMA request to never complete, leading to messages
like:
rcar-dmac e7300000.dma-controller: Channel Address Error happen
and, with debug enabled:
sh-sci e6e88000.serial: sci_dma_tx_work_fn: ffff800639b55000: 0...0, cookie 126
and DMA timeouts.
2. If the buffer is flushed after the first DMA API call, but before
the second, dma_sync_single_for_device() may be called with a zero
length, causing the transmit data not to be flushed to RAM, and
leading to stale data being output.
Fix this by:
1. Letting sci_dma_tx_work_fn() return immediately if the transmit
buffer is empty,
2. Extending the critical section to cover all DMA preparational work,
so tx_dma_len stays consistent for all of it,
3. Using local copies of circ_buf.head and circ_buf.tail, to make sure
they match the actual operation above.
Reported-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Suggested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Tested-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Link: https://lore.kernel.org/r/20190624123540.20629-2-geert+renesas@glider.be
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/tty/serial/sh-sci.c | 22 +++++++++++++++-------
1 file changed, 15 insertions(+), 7 deletions(-)
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index dc0b36ab999a..333de7d3fe86 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -1319,6 +1319,7 @@ static void work_fn_tx(struct work_struct *work)
struct uart_port *port = &s->port;
struct circ_buf *xmit = &port->state->xmit;
dma_addr_t buf;
+ int head, tail;
/*
* DMA is idle now.
@@ -1328,16 +1329,23 @@ static void work_fn_tx(struct work_struct *work)
* consistent xmit buffer state.
*/
spin_lock_irq(&port->lock);
- buf = s->tx_dma_addr + (xmit->tail & (UART_XMIT_SIZE - 1));
+ head = xmit->head;
+ tail = xmit->tail;
+ buf = s->tx_dma_addr + (tail & (UART_XMIT_SIZE - 1));
s->tx_dma_len = min_t(unsigned int,
- CIRC_CNT(xmit->head, xmit->tail, UART_XMIT_SIZE),
- CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE));
- spin_unlock_irq(&port->lock);
+ CIRC_CNT(head, tail, UART_XMIT_SIZE),
+ CIRC_CNT_TO_END(head, tail, UART_XMIT_SIZE));
+ if (!s->tx_dma_len) {
+ /* Transmit buffer has been flushed */
+ spin_unlock_irq(&port->lock);
+ return;
+ }
desc = dmaengine_prep_slave_single(chan, buf, s->tx_dma_len,
DMA_MEM_TO_DEV,
DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
if (!desc) {
+ spin_unlock_irq(&port->lock);
dev_warn(port->dev, "Failed preparing Tx DMA descriptor\n");
/* switch to PIO */
sci_tx_dma_release(s, true);
@@ -1347,20 +1355,20 @@ static void work_fn_tx(struct work_struct *work)
dma_sync_single_for_device(chan->device->dev, buf, s->tx_dma_len,
DMA_TO_DEVICE);
- spin_lock_irq(&port->lock);
desc->callback = sci_dma_tx_complete;
desc->callback_param = s;
- spin_unlock_irq(&port->lock);
s->cookie_tx = dmaengine_submit(desc);
if (dma_submit_error(s->cookie_tx)) {
+ spin_unlock_irq(&port->lock);
dev_warn(port->dev, "Failed submitting Tx DMA descriptor\n");
/* switch to PIO */
sci_tx_dma_release(s, true);
return;
}
+ spin_unlock_irq(&port->lock);
dev_dbg(port->dev, "%s: %p: %d...%d, cookie %d\n",
- __func__, xmit->buf, xmit->tail, xmit->head, s->cookie_tx);
+ __func__, xmit->buf, tail, head, s->cookie_tx);
dma_async_issue_pending(chan);
}
--
2.20.1
next prev parent reply other threads:[~2019-07-19 4:20 UTC|newest]
Thread overview: 66+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-19 4:10 [PATCH AUTOSEL 4.14 01/60] drm/panel: simple: Fix panel_simple_dsi_probe Sasha Levin
2019-07-19 4:10 ` [PATCH AUTOSEL 4.14 02/60] usb: core: hub: Disable hub-initiated U1/U2 Sasha Levin
2019-07-19 4:10 ` [PATCH AUTOSEL 4.14 03/60] tty: max310x: Fix invalid baudrate divisors calculator Sasha Levin
2019-07-19 4:10 ` [PATCH AUTOSEL 4.14 04/60] pinctrl: rockchip: fix leaked of_node references Sasha Levin
2019-07-19 4:10 ` [PATCH AUTOSEL 4.14 05/60] tty: serial: cpm_uart - fix init when SMC is relocated Sasha Levin
2019-07-19 4:10 ` [PATCH AUTOSEL 4.14 06/60] drm/edid: Fix a missing-check bug in drm_load_edid_firmware() Sasha Levin
2019-07-19 4:10 ` [PATCH AUTOSEL 4.14 07/60] PCI: Return error if cannot probe VF Sasha Levin
2019-07-19 4:10 ` [PATCH AUTOSEL 4.14 08/60] drm/bridge: tc358767: read display_props in get_modes() Sasha Levin
2019-07-19 4:10 ` [PATCH AUTOSEL 4.14 09/60] drm/bridge: sii902x: pixel clock unit is 10kHz instead of 1kHz Sasha Levin
2019-07-19 4:10 ` [PATCH AUTOSEL 4.14 10/60] drm/crc-debugfs: User irqsafe spinlock in drm_crtc_add_crc_entry Sasha Levin
2019-07-19 4:10 ` [PATCH AUTOSEL 4.14 11/60] memstick: Fix error cleanup path of memstick_init Sasha Levin
2019-07-19 4:10 ` [PATCH AUTOSEL 4.14 12/60] tty/serial: digicolor: Fix digicolor-usart already registered warning Sasha Levin
2019-07-19 4:10 ` [PATCH AUTOSEL 4.14 13/60] tty: serial: msm_serial: avoid system lockup condition Sasha Levin
2019-07-19 4:10 ` [PATCH AUTOSEL 4.14 14/60] serial: 8250: Fix TX interrupt handling condition Sasha Levin
2019-07-19 4:10 ` [PATCH AUTOSEL 4.14 15/60] drm/virtio: Add memory barriers for capset cache Sasha Levin
2019-07-19 4:10 ` [PATCH AUTOSEL 4.14 16/60] phy: renesas: rcar-gen2: Fix memory leak at error paths Sasha Levin
2019-07-19 4:10 ` [PATCH AUTOSEL 4.14 17/60] powerpc/pseries/mobility: prevent cpu hotplug during DT update Sasha Levin
2019-07-19 4:10 ` [PATCH AUTOSEL 4.14 18/60] drm/rockchip: Properly adjust to a true clock in adjusted_mode Sasha Levin
2019-07-19 4:10 ` [PATCH AUTOSEL 4.14 19/60] iio:core: Fix bug in length of event info_mask and catch unhandled bits set in masks Sasha Levin
2019-07-21 17:27 ` Jonathan Cameron
2019-07-28 15:38 ` Sasha Levin
2019-07-19 4:10 ` [PATCH AUTOSEL 4.14 20/60] tty: serial_core: Set port active bit in uart_port_activate Sasha Levin
2019-07-19 4:10 ` [PATCH AUTOSEL 4.14 21/60] usb: gadget: Zero ffs_io_data Sasha Levin
2019-07-19 4:10 ` [PATCH AUTOSEL 4.14 22/60] usb: gadget: storage: Remove warning message Sasha Levin
2019-07-19 4:10 ` [PATCH AUTOSEL 4.14 23/60] powerpc/pci/of: Fix OF flags parsing for 64bit BARs Sasha Levin
2019-07-19 4:10 ` [PATCH AUTOSEL 4.14 24/60] drm/msm: Depopulate platform on probe failure Sasha Levin
2019-07-19 4:10 ` [PATCH AUTOSEL 4.14 25/60] serial: mctrl_gpio: Check if GPIO property exisits before requesting it Sasha Levin
2019-07-19 4:10 ` [PATCH AUTOSEL 4.14 26/60] PCI: sysfs: Ignore lockdep for remove attribute Sasha Levin
2019-07-19 4:10 ` [PATCH AUTOSEL 4.14 27/60] iio: st_accel: fix iio_triggered_buffer_{pre,post}enable positions Sasha Levin
2019-07-19 4:10 ` [PATCH AUTOSEL 4.14 28/60] kbuild: Add -Werror=unknown-warning-option to CLANG_FLAGS Sasha Levin
2019-07-19 4:10 ` [PATCH AUTOSEL 4.14 29/60] PCI: xilinx-nwl: Fix Multi MSI data programming Sasha Levin
2019-07-19 4:10 ` [PATCH AUTOSEL 4.14 30/60] iio: iio-utils: Fix possible incorrect mask calculation Sasha Levin
2019-07-19 4:10 ` [PATCH AUTOSEL 4.14 31/60] powerpc/xmon: Fix disabling tracing while in xmon Sasha Levin
2019-07-19 4:10 ` [PATCH AUTOSEL 4.14 32/60] recordmcount: Fix spurious mcount entries on powerpc Sasha Levin
2019-07-19 4:10 ` [PATCH AUTOSEL 4.14 33/60] mfd: core: Set fwnode for created devices Sasha Levin
2019-07-19 4:10 ` [PATCH AUTOSEL 4.14 34/60] mfd: arizona: Fix undefined behavior Sasha Levin
2019-07-19 4:10 ` [PATCH AUTOSEL 4.14 35/60] mfd: hi655x-pmic: Fix missing return value check for devm_regmap_init_mmio_clk Sasha Levin
2019-07-19 4:10 ` [PATCH AUTOSEL 4.14 36/60] um: Silence lockdep complaint about mmap_sem Sasha Levin
2019-07-19 4:10 ` [PATCH AUTOSEL 4.14 37/60] powerpc/4xx/uic: clear pending interrupt after irq type/pol change Sasha Levin
2019-07-19 4:10 ` [PATCH AUTOSEL 4.14 38/60] RDMA/i40iw: Set queue pair state when being queried Sasha Levin
2019-07-19 4:10 ` [PATCH AUTOSEL 4.14 39/60] serial: sh-sci: Terminate TX DMA during buffer flushing Sasha Levin
2019-07-19 4:10 ` Sasha Levin [this message]
2019-07-19 4:10 ` [PATCH AUTOSEL 4.14 41/60] PCI: tegra: Enable Relaxed Ordering only for Tegra20 & Tegra30 Sasha Levin
2019-07-19 8:33 ` Jon Hunter
2019-07-19 13:31 ` Sasha Levin
2019-07-19 13:53 ` Lorenzo Pieralisi
2019-07-28 15:42 ` Sasha Levin
2019-07-19 4:10 ` [PATCH AUTOSEL 4.14 42/60] kallsyms: exclude kasan local symbols on s390 Sasha Levin
2019-07-19 4:10 ` [PATCH AUTOSEL 4.14 43/60] perf test mmap-thread-lookup: Initialize variable to suppress memory sanitizer warning Sasha Levin
2019-07-19 4:10 ` [PATCH AUTOSEL 4.14 44/60] perf session: Fix potential NULL pointer dereference found by the smatch tool Sasha Levin
2019-07-19 4:10 ` [PATCH AUTOSEL 4.14 45/60] perf annotate: Fix dereferencing freed memory " Sasha Levin
2019-07-19 4:10 ` [PATCH AUTOSEL 4.14 46/60] RDMA/rxe: Fill in wc byte_len with IB_WC_RECV_RDMA_WITH_IMM Sasha Levin
2019-07-19 4:10 ` [PATCH AUTOSEL 4.14 47/60] PCI: dwc: pci-dra7xx: Fix compilation when !CONFIG_GPIOLIB Sasha Levin
2019-07-19 4:10 ` [PATCH AUTOSEL 4.14 48/60] powerpc/boot: add {get, put}_unaligned_be32 to xz_config.h Sasha Levin
2019-07-19 4:10 ` [PATCH AUTOSEL 4.14 49/60] f2fs: avoid out-of-range memory access Sasha Levin
2019-07-19 4:10 ` [PATCH AUTOSEL 4.14 50/60] mailbox: handle failed named mailbox channel request Sasha Levin
2019-07-19 4:11 ` [PATCH AUTOSEL 4.14 51/60] powerpc/eeh: Handle hugepages in ioremap space Sasha Levin
2019-07-19 4:11 ` [PATCH AUTOSEL 4.14 52/60] s390/dasd: Make layout analysis ESE compatible Sasha Levin
2019-07-19 4:11 ` [PATCH AUTOSEL 4.14 53/60] block/bio-integrity: fix a memory leak bug Sasha Levin
2019-07-19 4:11 ` [PATCH AUTOSEL 4.14 54/60] sh: prevent warnings when using iounmap Sasha Levin
2019-07-19 4:11 ` [PATCH AUTOSEL 4.14 55/60] mm/kmemleak.c: fix check for softirq context Sasha Levin
2019-07-19 4:11 ` [PATCH AUTOSEL 4.14 56/60] 9p: pass the correct prototype to read_cache_page Sasha Levin
2019-07-19 4:11 ` [PATCH AUTOSEL 4.14 57/60] mm/gup.c: mark undo_dev_pagemap as __maybe_unused Sasha Levin
2019-07-19 4:11 ` [PATCH AUTOSEL 4.14 58/60] mm/gup.c: remove some BUG_ONs from get_gate_page() Sasha Levin
2019-07-19 4:11 ` [PATCH AUTOSEL 4.14 59/60] mm/mmu_notifier: use hlist_add_head_rcu() Sasha Levin
2019-07-19 4:11 ` [PATCH AUTOSEL 4.14 60/60] locking/lockdep: Fix lock used or unused stats error Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190719041109.18262-40-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=erosca@de.adit-jv.com \
--cc=geert+renesas@glider.be \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
--cc=stable@vger.kernel.org \
--cc=yoshihiro.shimoda.uh@renesas.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).