[PATCH AUTOSEL 4.4 1/4] dmaengine: ste_dma40: fix unneeded variable warning

[PATCH AUTOSEL 4.4 1/4] dmaengine: ste_dma40: fix unneeded variable warning

[Sasha Levin]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit 5d6fb560729a5d5554e23db8d00eb57cd0021083 ]

clang-9 points out that there are two variables that depending on the
configuration may only be used in an ARRAY_SIZE() expression but not
referenced:

drivers/dma/ste_dma40.c:145:12: error: variable 'd40_backup_regs' is not needed and will not be emitted [-Werror,-Wunneeded-internal-declaration]
static u32 d40_backup_regs[] = {
           ^
drivers/dma/ste_dma40.c:214:12: error: variable 'd40_backup_regs_chan' is not needed and will not be emitted [-Werror,-Wunneeded-internal-declaration]
static u32 d40_backup_regs_chan[] = {

Mark these __maybe_unused to shut up the warning.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20190712091357.744515-1-arnd@arndb.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/ste_dma40.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c
index dd3e7ba273ad0..0fede051f4e1c 100644
--- a/drivers/dma/ste_dma40.c
+++ b/drivers/dma/ste_dma40.c
@@ -142,7 +142,7 @@ enum d40_events {
  * when the DMA hw is powered off.
  * TODO: Add save/restore of D40_DREG_GCC on dma40 v3 or later, if that works.
  */
-static u32 d40_backup_regs[] = {
+static __maybe_unused u32 d40_backup_regs[] = {
 	D40_DREG_LCPA,
 	D40_DREG_LCLA,
 	D40_DREG_PRMSE,
@@ -211,7 +211,7 @@ static u32 d40_backup_regs_v4b[] = {
 
 #define BACKUP_REGS_SZ_V4B ARRAY_SIZE(d40_backup_regs_v4b)
 
-static u32 d40_backup_regs_chan[] = {
+static __maybe_unused u32 d40_backup_regs_chan[] = {
 	D40_CHAN_REG_SSCFG,
 	D40_CHAN_REG_SSELT,
 	D40_CHAN_REG_SSPTR,
-- 
2.20.1

[PATCH AUTOSEL 4.4 2/4] usb: gadget: composite: Clear "suspended" on reset/disconnect

[Sasha Levin]

From: Benjamin Herrenschmidt <benh@kernel.crashing.org>

[ Upstream commit 602fda17c7356bb7ae98467d93549057481d11dd ]

In some cases, one can get out of suspend with a reset or
a disconnect followed by a reconnect. Previously we would
leave a stale suspended flag set.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/gadget/composite.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index 8bf54477f4724..351a406b97af7 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -1889,6 +1889,7 @@ void composite_disconnect(struct usb_gadget *gadget)
 	 * disconnect callbacks?
 	 */
 	spin_lock_irqsave(&cdev->lock, flags);
+	cdev->suspended = 0;
 	if (cdev->config)
 		reset_config(cdev);
 	if (cdev->driver->disconnect)
-- 
2.20.1

[PATCH AUTOSEL 4.4 3/4] usb: host: fotg2: restart hcd after port reset

[Sasha Levin]

From: Hans Ulli Kroll <ulli.kroll@googlemail.com>

[ Upstream commit 777758888ffe59ef754cc39ab2f275dc277732f4 ]

On the Gemini SoC the FOTG2 stalls after port reset
so restart the HCD after each port reset.

Signed-off-by: Hans Ulli Kroll <ulli.kroll@googlemail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20190810150458.817-1-linus.walleij@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/host/fotg210-hcd.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/usb/host/fotg210-hcd.c b/drivers/usb/host/fotg210-hcd.c
index 2341af4f34909..11b3a8c57eabc 100644
--- a/drivers/usb/host/fotg210-hcd.c
+++ b/drivers/usb/host/fotg210-hcd.c
@@ -1653,6 +1653,10 @@ static int fotg210_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 			/* see what we found out */
 			temp = check_reset_complete(fotg210, wIndex, status_reg,
 					fotg210_readl(fotg210, status_reg));
+
+			/* restart schedule */
+			fotg210->command |= CMD_RUN;
+			fotg210_writel(fotg210, fotg210->command, &fotg210->regs->command);
 		}
 
 		if (!(temp & (PORT_RESUME|PORT_RESET))) {
-- 
2.20.1

[PATCH AUTOSEL 4.4 4/4] tools: hv: fix KVP and VSS daemons exit code

[Sasha Levin]

From: Adrian Vladu <avladu@cloudbasesolutions.com>

[ Upstream commit b0995156071b0ff29a5902964a9dc8cfad6f81c0 ]

HyperV KVP and VSS daemons should exit with 0 when the '--help'
or '-h' flags are used.

Signed-off-by: Adrian Vladu <avladu@cloudbasesolutions.com>

Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Sasha Levin <sashal@kernel.org>
Cc: Alessandro Pilotti <apilotti@cloudbasesolutions.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/hv/hv_kvp_daemon.c | 2 ++
 tools/hv/hv_vss_daemon.c | 2 ++
 2 files changed, 4 insertions(+)

diff --git a/tools/hv/hv_kvp_daemon.c b/tools/hv/hv_kvp_daemon.c
index 1774800668168..fffc7c4184599 100644
--- a/tools/hv/hv_kvp_daemon.c
+++ b/tools/hv/hv_kvp_daemon.c
@@ -1379,6 +1379,8 @@ int main(int argc, char *argv[])
 			daemonize = 0;
 			break;
 		case 'h':
+			print_usage(argv);
+			exit(0);
 		default:
 			print_usage(argv);
 			exit(EXIT_FAILURE);
diff --git a/tools/hv/hv_vss_daemon.c b/tools/hv/hv_vss_daemon.c
index 5d51d6ff08e6a..b5465f92ed50e 100644
--- a/tools/hv/hv_vss_daemon.c
+++ b/tools/hv/hv_vss_daemon.c
@@ -164,6 +164,8 @@ int main(int argc, char *argv[])
 			daemonize = 0;
 			break;
 		case 'h':
+			print_usage(argv);
+			exit(0);
 		default:
 			print_usage(argv);
 			exit(EXIT_FAILURE);
-- 
2.20.1