[PATCH 4.19 08/50] net: phylink: Fix flow control resolution

[Greg Kroah-Hartman <gregkh@linuxfoundation.org>]

From: Stefan Chulski <stefanc@marvell.com>

[ Upstream commit 63b2ed4e10b2e6c913e1d8cdd728e7fba4115a3d ]

Regarding to IEEE 802.3-2015 standard section 2
28B.3 Priority resolution - Table 28-3 - Pause resolution

In case of Local device Pause=1 AsymDir=0, Link partner
Pause=1 AsymDir=1, Local device resolution should be enable PAUSE
transmit, disable PAUSE receive.
And in case of Local device Pause=1 AsymDir=1, Link partner
Pause=1 AsymDir=0, Local device resolution should be enable PAUSE
receive, disable PAUSE transmit.

Fixes: 9525ae83959b ("phylink: add phylink infrastructure")
Signed-off-by: Stefan Chulski <stefanc@marvell.com>
Reported-by: Shaul Ben-Mayor <shaulb@marvell.com>
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/phy/phylink.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -380,8 +380,8 @@ static void phylink_get_fixed_state(stru
  *  Local device  Link partner
  *  Pause AsymDir Pause AsymDir Result
  *    1     X       1     X     TX+RX
- *    0     1       1     1     RX
- *    1     1       0     1     TX
+ *    0     1       1     1     TX
+ *    1     1       0     1     RX
  */
 static void phylink_resolve_flow(struct phylink *pl,
 				 struct phylink_link_state *state)
@@ -402,7 +402,7 @@ static void phylink_resolve_flow(struct
 			new_pause = MLO_PAUSE_TX | MLO_PAUSE_RX;
 		else if (pause & MLO_PAUSE_ASYM)
 			new_pause = state->pause & MLO_PAUSE_SYM ?
-				 MLO_PAUSE_RX : MLO_PAUSE_TX;
+				 MLO_PAUSE_TX : MLO_PAUSE_RX;
 	} else {
 		new_pause = pl->link_config.pause & MLO_PAUSE_TXRX_MASK;
 	}