stable.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Mathieu Poirier <mathieu.poirier@linaro.org>
To: Mike Leach <mike.leach@linaro.org>
Cc: coresight@lists.linaro.org, linux-arm-kernel@lists.infradead.org,
	linux-doc@vger.kernel.org, corbet@lwn.net,
	gregkh@linuxfoundation.org, suzuki.poulose@arm.com,
	stable <stable@vger.kernel.org>
Subject: Re: [PATCH v3 02/11] coresight: etm4x: Fix input validation for sysfs.
Date: Thu, 17 Oct 2019 11:56:55 -0600	[thread overview]
Message-ID: <20191017175655.GB17991@xps15> (raw)
In-Reply-To: <20191015212004.24748-3-mike.leach@linaro.org>

On Tue, Oct 15, 2019 at 10:19:55PM +0100, Mike Leach wrote:
> A number of issues are fixed relating to sysfs input validation:-
> 
> 1) bb_ctrl_store() - incorrect compare of bit select field to absolute
> value. Reworked per ETMv4 specification.
> 2) seq_event_store() - incorrect mask value - register has two
> event values.
> 3) cyc_threshold_store() - must mask with max before checking min
> otherwise wrapped values can set illegal value below min.
> 4) res_ctrl_store() - update to mask off all res0 bits.
> 
> Reviewed-by: Leo Yan <leo.yan@linaro.org>
> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
> Signed-off-by: Mike Leach <mike.leach@linaro.org>
> Fixes: a77de2637c9eb ("coresight: etm4x: moving sysFS entries to a dedicated file")
> Cc: stable <stable@vger.kernel.org> # 4.9+
> ---
>  .../coresight/coresight-etm4x-sysfs.c         | 21 ++++++++++++-------
>  1 file changed, 13 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c b/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c
> index b6984be0c515..cc8156318018 100644
> --- a/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c
> +++ b/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c
> @@ -652,10 +652,13 @@ static ssize_t cyc_threshold_store(struct device *dev,
>  
>  	if (kstrtoul(buf, 16, &val))
>  		return -EINVAL;
> +
> +	/* mask off max threshold before checking min value */
> +	val &= ETM_CYC_THRESHOLD_MASK;
>  	if (val < drvdata->ccitmin)
>  		return -EINVAL;
>  
> -	config->ccctlr = val & ETM_CYC_THRESHOLD_MASK;
> +	config->ccctlr = val;
>  	return size;
>  }
>  static DEVICE_ATTR_RW(cyc_threshold);
> @@ -686,14 +689,16 @@ static ssize_t bb_ctrl_store(struct device *dev,
>  		return -EINVAL;
>  	if (!drvdata->nr_addr_cmp)
>  		return -EINVAL;
> +
>  	/*
> -	 * Bit[7:0] selects which address range comparator is used for
> -	 * branch broadcast control.
> +	 * Bit[8] controls include(1) / exclude(0), bits[0-7] select
> +	 * individual range comparators. If include then at least 1
> +	 * range must be selected.
>  	 */
> -	if (BMVAL(val, 0, 7) > drvdata->nr_addr_cmp)
> +	if ((val & BIT(8)) && (BMVAL(val, 0, 7) == 0))
>  		return -EINVAL;
>  
> -	config->bb_ctrl = val;
> +	config->bb_ctrl = val & GENMASK(8, 0);
>  	return size;
>  }
>  static DEVICE_ATTR_RW(bb_ctrl);
> @@ -1324,8 +1329,8 @@ static ssize_t seq_event_store(struct device *dev,
>  
>  	spin_lock(&drvdata->spinlock);
>  	idx = config->seq_idx;
> -	/* RST, bits[7:0] */
> -	config->seq_ctrl[idx] = val & 0xFF;
> +	/* Seq control has two masks B[15:8] F[7:0] */
> +	config->seq_ctrl[idx] = val & 0xFFFF;
>  	spin_unlock(&drvdata->spinlock);
>  	return size;
>  }
> @@ -1580,7 +1585,7 @@ static ssize_t res_ctrl_store(struct device *dev,
>  	if (idx % 2 != 0)
>  		/* PAIRINV, bit[21] */
>  		val &= ~BIT(21);
> -	config->res_ctrl[idx] = val;
> +	config->res_ctrl[idx] = val & GENMASK(21, 0);
>  	spin_unlock(&drvdata->spinlock);
>  	return size;

This one too, no need to send again.

>  }
> -- 
> 2.17.1
> 

      reply	other threads:[~2019-10-17 17:57 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20191015212004.24748-1-mike.leach@linaro.org>
2019-10-15 21:19 ` [PATCH v3 02/11] coresight: etm4x: Fix input validation for sysfs Mike Leach
2019-10-17 17:56   ` Mathieu Poirier [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191017175655.GB17991@xps15 \
    --to=mathieu.poirier@linaro.org \
    --cc=corbet@lwn.net \
    --cc=coresight@lists.linaro.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-doc@vger.kernel.org \
    --cc=mike.leach@linaro.org \
    --cc=stable@vger.kernel.org \
    --cc=suzuki.poulose@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).