[PATCH 1/4] USB: atm: ueagle-atm: add missing endpoint check

[PATCH 1/4] USB: atm: ueagle-atm: add missing endpoint check

[Johan Hovold]

Make sure that the interrupt interface has an endpoint before trying to
access its endpoint descriptors to avoid dereferencing a NULL pointer.

The driver binds to the interrupt interface with interface number 0, but
must not assume that this interface or its current alternate setting are
the first entries in the corresponding configuration arrays.

Fixes: b72458a80c75 ("[PATCH] USB: Eagle and ADI 930 usb adsl modem driver")
Cc: stable <stable@vger.kernel.org>     # 2.6.16
Signed-off-by: Johan Hovold <johan@kernel.org>
---
 drivers/usb/atm/ueagle-atm.c | 18 ++++++++++++------
 1 file changed, 12 insertions(+), 6 deletions(-)

diff --git a/drivers/usb/atm/ueagle-atm.c b/drivers/usb/atm/ueagle-atm.c
index 8b0ea8c70d73..635cf0466b59 100644
--- a/drivers/usb/atm/ueagle-atm.c
+++ b/drivers/usb/atm/ueagle-atm.c
@@ -2124,10 +2124,11 @@ static void uea_intr(struct urb *urb)
 /*
  * Start the modem : init the data and start kernel thread
  */
-static int uea_boot(struct uea_softc *sc)
+static int uea_boot(struct uea_softc *sc, struct usb_interface *intf)
 {
-	int ret, size;
 	struct intr_pkt *intr;
+	int ret = -ENOMEM;
+	int size;
 
 	uea_enters(INS_TO_USBDEV(sc));
 
@@ -2152,6 +2153,11 @@ static int uea_boot(struct uea_softc *sc)
 	if (UEA_CHIP_VERSION(sc) == ADI930)
 		load_XILINX_firmware(sc);
 
+	if (intf->cur_altsetting->desc.bNumEndpoints < 1) {
+		ret = -ENODEV;
+		goto err0;
+	}
+
 	intr = kmalloc(size, GFP_KERNEL);
 	if (!intr)
 		goto err0;
@@ -2163,8 +2169,7 @@ static int uea_boot(struct uea_softc *sc)
 	usb_fill_int_urb(sc->urb_int, sc->usb_dev,
 			 usb_rcvintpipe(sc->usb_dev, UEA_INTR_PIPE),
 			 intr, size, uea_intr, sc,
-			 sc->usb_dev->actconfig->interface[0]->altsetting[0].
-			 endpoint[0].desc.bInterval);
+			 intf->cur_altsetting->endpoint[0].desc.bInterval);
 
 	ret = usb_submit_urb(sc->urb_int, GFP_KERNEL);
 	if (ret < 0) {
@@ -2179,6 +2184,7 @@ static int uea_boot(struct uea_softc *sc)
 	sc->kthread = kthread_create(uea_kthread, sc, "ueagle-atm");
 	if (IS_ERR(sc->kthread)) {
 		uea_err(INS_TO_USBDEV(sc), "failed to create thread\n");
+		ret = PTR_ERR(sc->kthread);
 		goto err2;
 	}
 
@@ -2193,7 +2199,7 @@ static int uea_boot(struct uea_softc *sc)
 	kfree(intr);
 err0:
 	uea_leaves(INS_TO_USBDEV(sc));
-	return -ENOMEM;
+	return ret;
 }
 
 /*
@@ -2548,7 +2554,7 @@ static int uea_bind(struct usbatm_data *usbatm, struct usb_interface *intf,
 		}
 	}
 
-	ret = uea_boot(sc);
+	ret = uea_boot(sc, intf);
 	if (ret < 0)
 		goto error;
 
-- 
2.24.0

[PATCH 2/4] USB: adutux: fix interface sanity check

[Johan Hovold]

Make sure to use the current alternate setting when verifying the
interface descriptors to avoid binding to an invalid interface.

Failing to do so could cause the driver to misbehave or trigger a WARN()
in usb_submit_urb() that kernels with panic_on_warn set would choke on.

Fixes: 03270634e242 ("USB: Add ADU support for Ontrak ADU devices")
Cc: stable <stable@vger.kernel.org>     # 2.6.19
Signed-off-by: Johan Hovold <johan@kernel.org>
---
 drivers/usb/misc/adutux.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/misc/adutux.c b/drivers/usb/misc/adutux.c
index 6f5edb9fc61e..d8d157c4c271 100644
--- a/drivers/usb/misc/adutux.c
+++ b/drivers/usb/misc/adutux.c
@@ -669,7 +669,7 @@ static int adu_probe(struct usb_interface *interface,
 	init_waitqueue_head(&dev->read_wait);
 	init_waitqueue_head(&dev->write_wait);
 
-	res = usb_find_common_endpoints_reverse(&interface->altsetting[0],
+	res = usb_find_common_endpoints_reverse(interface->cur_altsetting,
 			NULL, NULL,
 			&dev->interrupt_in_endpoint,
 			&dev->interrupt_out_endpoint);
-- 
2.24.0

[PATCH 3/4] USB: idmouse: fix interface sanity checks

[Johan Hovold]

Make sure to use the current alternate setting when verifying the
interface descriptors to avoid binding to an invalid interface.

Failing to do so could cause the driver to misbehave or trigger a WARN()
in usb_submit_urb() that kernels with panic_on_warn set would choke on.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
---
 drivers/usb/misc/idmouse.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/misc/idmouse.c b/drivers/usb/misc/idmouse.c
index 4afb5ddfd361..e9437a176518 100644
--- a/drivers/usb/misc/idmouse.c
+++ b/drivers/usb/misc/idmouse.c
@@ -322,7 +322,7 @@ static int idmouse_probe(struct usb_interface *interface,
 	int result;
 
 	/* check if we have gotten the data or the hid interface */
-	iface_desc = &interface->altsetting[0];
+	iface_desc = interface->cur_altsetting;
 	if (iface_desc->desc.bInterfaceClass != 0x0A)
 		return -ENODEV;
 
-- 
2.24.0

[PATCH 4/4] USB: serial: io_edgeport: fix epic endpoint lookup

[Johan Hovold]

Make sure to use the current alternate setting when looking up the
endpoints on epic devices to avoid binding to an invalid interface.

Failing to do so could cause the driver to misbehave or trigger a WARN()
in usb_submit_urb() that kernels with panic_on_warn set would choke on.

Fixes: 6e8cf7751f9f ("USB: add EPIC support to the io_edgeport driver")
Cc: stable <stable@vger.kernel.org>     # 2.6.21
Signed-off-by: Johan Hovold <johan@kernel.org>
---
 drivers/usb/serial/io_edgeport.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index 48a439298a68..9690a5f4b9d6 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -2901,16 +2901,18 @@ static int edge_startup(struct usb_serial *serial)
 	response = 0;
 
 	if (edge_serial->is_epic) {
+		struct usb_host_interface *alt;
+
+		alt = serial->interface->cur_altsetting;
+
 		/* EPIC thing, set up our interrupt polling now and our read
 		 * urb, so that the device knows it really is connected. */
 		interrupt_in_found = bulk_in_found = bulk_out_found = false;
-		for (i = 0; i < serial->interface->altsetting[0]
-						.desc.bNumEndpoints; ++i) {
+		for (i = 0; i < alt->desc.bNumEndpoints; ++i) {
 			struct usb_endpoint_descriptor *endpoint;
 			int buffer_size;
 
-			endpoint = &serial->interface->altsetting[0].
-							endpoint[i].desc;
+			endpoint = &alt->endpoint[i].desc;
 			buffer_size = usb_endpoint_maxp(endpoint);
 			if (!interrupt_in_found &&
 			    (usb_endpoint_is_int_in(endpoint))) {
-- 
2.24.0