From: Mathias Nyman <mathias.nyman@linux.intel.com>
To: <gregkh@linuxfoundation.org>
Cc: <linux-usb@vger.kernel.org>, Henry Lin <henryl@nvidia.com>,
stable@vger.kernel.org,
Mathias Nyman <mathias.nyman@linux.intel.com>
Subject: [PATCH 3/6] usb: xhci: only set D3hot for pci device
Date: Wed, 11 Dec 2019 16:20:04 +0200 [thread overview]
Message-ID: <20191211142007.8847-4-mathias.nyman@linux.intel.com> (raw)
In-Reply-To: <20191211142007.8847-1-mathias.nyman@linux.intel.com>
From: Henry Lin <henryl@nvidia.com>
Xhci driver cannot call pci_set_power_state() on non-pci xhci host
controllers. For example, NVIDIA Tegra XHCI host controller which acts
as platform device with XHCI_SPURIOUS_WAKEUP quirk set in some platform
hits this issue during shutdown.
Cc: <stable@vger.kernel.org>
Fixes: 638298dc66ea ("xhci: Fix spurious wakeups after S5 on Haswell")
Signed-off-by: Henry Lin <henryl@nvidia.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
---
drivers/usb/host/xhci-pci.c | 13 +++++++++++++
drivers/usb/host/xhci.c | 7 ++-----
drivers/usb/host/xhci.h | 1 +
3 files changed, 16 insertions(+), 5 deletions(-)
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index a0025d23b257..2907fe4d78dd 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -521,6 +521,18 @@ static int xhci_pci_resume(struct usb_hcd *hcd, bool hibernated)
}
#endif /* CONFIG_PM */
+static void xhci_pci_shutdown(struct usb_hcd *hcd)
+{
+ struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+ struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
+
+ xhci_shutdown(hcd);
+
+ /* Yet another workaround for spurious wakeups at shutdown with HSW */
+ if (xhci->quirks & XHCI_SPURIOUS_WAKEUP)
+ pci_set_power_state(pdev, PCI_D3hot);
+}
+
/*-------------------------------------------------------------------------*/
/* PCI driver selection metadata; PCI hotplugging uses this */
@@ -556,6 +568,7 @@ static int __init xhci_pci_init(void)
#ifdef CONFIG_PM
xhci_pci_hc_driver.pci_suspend = xhci_pci_suspend;
xhci_pci_hc_driver.pci_resume = xhci_pci_resume;
+ xhci_pci_hc_driver.shutdown = xhci_pci_shutdown;
#endif
return pci_register_driver(&xhci_pci_driver);
}
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 6721d059f58a..c5ee562c4c74 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -770,7 +770,7 @@ static void xhci_stop(struct usb_hcd *hcd)
*
* This will only ever be called with the main usb_hcd (the USB3 roothub).
*/
-static void xhci_shutdown(struct usb_hcd *hcd)
+void xhci_shutdown(struct usb_hcd *hcd)
{
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
@@ -789,11 +789,8 @@ static void xhci_shutdown(struct usb_hcd *hcd)
xhci_dbg_trace(xhci, trace_xhci_dbg_init,
"xhci_shutdown completed - status = %x",
readl(&xhci->op_regs->status));
-
- /* Yet another workaround for spurious wakeups at shutdown with HSW */
- if (xhci->quirks & XHCI_SPURIOUS_WAKEUP)
- pci_set_power_state(to_pci_dev(hcd->self.sysdev), PCI_D3hot);
}
+EXPORT_SYMBOL_GPL(xhci_shutdown);
#ifdef CONFIG_PM
static void xhci_save_registers(struct xhci_hcd *xhci)
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index dc6f62a4b197..13d8838cd552 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -2050,6 +2050,7 @@ int xhci_start(struct xhci_hcd *xhci);
int xhci_reset(struct xhci_hcd *xhci);
int xhci_run(struct usb_hcd *hcd);
int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks);
+void xhci_shutdown(struct usb_hcd *hcd);
void xhci_init_driver(struct hc_driver *drv,
const struct xhci_driver_overrides *over);
int xhci_disable_slot(struct xhci_hcd *xhci, u32 slot_id);
--
2.17.1
next prev parent reply other threads:[~2019-12-11 14:18 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20191211142007.8847-1-mathias.nyman@linux.intel.com>
2019-12-11 14:20 ` [PATCH 1/6] xhci: Fix memory leak in xhci_add_in_port() Mathias Nyman
2019-12-11 14:20 ` [PATCH 2/6] xhci: fix USB3 device initiated resume race with roothub autosuspend Mathias Nyman
2019-12-11 14:20 ` Mathias Nyman [this message]
2019-12-11 14:20 ` [PATCH 4/6] xhci: Increase STS_HALT timeout in xhci_suspend() Mathias Nyman
2019-12-11 14:20 ` [PATCH 5/6] xhci: handle some XHCI_TRUST_TX_LENGTH quirks cases as default behaviour Mathias Nyman
2019-12-11 14:20 ` [PATCH 6/6] xhci: make sure interrupts are restored to correct state Mathias Nyman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191211142007.8847-4-mathias.nyman@linux.intel.com \
--to=mathias.nyman@linux.intel.com \
--cc=gregkh@linuxfoundation.org \
--cc=henryl@nvidia.com \
--cc=linux-usb@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox