From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Kevin Hao <haokexin@gmail.com>,
Guenter Roeck <linux@roeck-us.net>,
Wim Van Sebroeck <wim@linux-watchdog.org>,
Sasha Levin <sashal@kernel.org>,
linux-watchdog@vger.kernel.org
Subject: [PATCH AUTOSEL 5.4 087/134] watchdog: Fix the race between the release of watchdog_core_data and cdev
Date: Wed, 11 Dec 2019 10:11:03 -0500 [thread overview]
Message-ID: <20191211151150.19073-87-sashal@kernel.org> (raw)
In-Reply-To: <20191211151150.19073-1-sashal@kernel.org>
From: Kevin Hao <haokexin@gmail.com>
[ Upstream commit 72139dfa2464e43957d330266994740bb7be2535 ]
The struct cdev is embedded in the struct watchdog_core_data. In the
current code, we manage the watchdog_core_data with a kref, but the
cdev is manged by a kobject. There is no any relationship between
this kref and kobject. So it is possible that the watchdog_core_data is
freed before the cdev is entirely released. We can easily get the
following call trace with CONFIG_DEBUG_KOBJECT_RELEASE and
CONFIG_DEBUG_OBJECTS_TIMERS enabled.
ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x38
WARNING: CPU: 23 PID: 1028 at lib/debugobjects.c:481 debug_print_object+0xb0/0xf0
Modules linked in: softdog(-) deflate ctr twofish_generic twofish_common camellia_generic serpent_generic blowfish_generic blowfish_common cast5_generic cast_common cmac xcbc af_key sch_fq_codel openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4
CPU: 23 PID: 1028 Comm: modprobe Not tainted 5.3.0-next-20190924-yoctodev-standard+ #180
Hardware name: Marvell OcteonTX CN96XX board (DT)
pstate: 00400009 (nzcv daif +PAN -UAO)
pc : debug_print_object+0xb0/0xf0
lr : debug_print_object+0xb0/0xf0
sp : ffff80001cbcfc70
x29: ffff80001cbcfc70 x28: ffff800010ea2128
x27: ffff800010bad000 x26: 0000000000000000
x25: ffff80001103c640 x24: ffff80001107b268
x23: ffff800010bad9e8 x22: ffff800010ea2128
x21: ffff000bc2c62af8 x20: ffff80001103c600
x19: ffff800010e867d8 x18: 0000000000000060
x17: 0000000000000000 x16: 0000000000000000
x15: ffff000bd7240470 x14: 6e6968207473696c
x13: 5f72656d6974203a x12: 6570797420746365
x11: 6a626f2029302065 x10: 7461747320657669
x9 : 7463612820657669 x8 : 3378302f3078302b
x7 : 0000000000001d7a x6 : ffff800010fd5889
x5 : 0000000000000000 x4 : 0000000000000000
x3 : 0000000000000000 x2 : ffff000bff948548
x1 : 276a1c9e1edc2300 x0 : 0000000000000000
Call trace:
debug_print_object+0xb0/0xf0
debug_check_no_obj_freed+0x1e8/0x210
kfree+0x1b8/0x368
watchdog_cdev_unregister+0x88/0xc8
watchdog_dev_unregister+0x38/0x48
watchdog_unregister_device+0xa8/0x100
softdog_exit+0x18/0xfec4 [softdog]
__arm64_sys_delete_module+0x174/0x200
el0_svc_handler+0xd0/0x1c8
el0_svc+0x8/0xc
This is a common issue when using cdev embedded in a struct.
Fortunately, we already have a mechanism to solve this kind of issue.
Please see commit 233ed09d7fda ("chardev: add helper function to
register char devs with a struct device") for more detail.
In this patch, we choose to embed the struct device into the
watchdog_core_data, and use the API provided by the commit 233ed09d7fda
to make sure that the release of watchdog_core_data and cdev are
in sequence.
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20191008112934.29669-1-haokexin@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/watchdog/watchdog_dev.c | 70 +++++++++++++++------------------
1 file changed, 32 insertions(+), 38 deletions(-)
diff --git a/drivers/watchdog/watchdog_dev.c b/drivers/watchdog/watchdog_dev.c
index d3acc0a7256ca..62483a99105c0 100644
--- a/drivers/watchdog/watchdog_dev.c
+++ b/drivers/watchdog/watchdog_dev.c
@@ -34,7 +34,6 @@
#include <linux/init.h> /* For __init/__exit/... */
#include <linux/hrtimer.h> /* For hrtimers */
#include <linux/kernel.h> /* For printk/panic/... */
-#include <linux/kref.h> /* For data references */
#include <linux/kthread.h> /* For kthread_work */
#include <linux/miscdevice.h> /* For handling misc devices */
#include <linux/module.h> /* For module stuff/... */
@@ -52,14 +51,14 @@
/*
* struct watchdog_core_data - watchdog core internal data
- * @kref: Reference count.
+ * @dev: The watchdog's internal device
* @cdev: The watchdog's Character device.
* @wdd: Pointer to watchdog device.
* @lock: Lock for watchdog core.
* @status: Watchdog core internal status bits.
*/
struct watchdog_core_data {
- struct kref kref;
+ struct device dev;
struct cdev cdev;
struct watchdog_device *wdd;
struct mutex lock;
@@ -840,7 +839,7 @@ static int watchdog_open(struct inode *inode, struct file *file)
file->private_data = wd_data;
if (!hw_running)
- kref_get(&wd_data->kref);
+ get_device(&wd_data->dev);
/*
* open_timeout only applies for the first open from
@@ -861,11 +860,11 @@ out_clear:
return err;
}
-static void watchdog_core_data_release(struct kref *kref)
+static void watchdog_core_data_release(struct device *dev)
{
struct watchdog_core_data *wd_data;
- wd_data = container_of(kref, struct watchdog_core_data, kref);
+ wd_data = container_of(dev, struct watchdog_core_data, dev);
kfree(wd_data);
}
@@ -925,7 +924,7 @@ done:
*/
if (!running) {
module_put(wd_data->cdev.owner);
- kref_put(&wd_data->kref, watchdog_core_data_release);
+ put_device(&wd_data->dev);
}
return 0;
}
@@ -944,17 +943,22 @@ static struct miscdevice watchdog_miscdev = {
.fops = &watchdog_fops,
};
+static struct class watchdog_class = {
+ .name = "watchdog",
+ .owner = THIS_MODULE,
+ .dev_groups = wdt_groups,
+};
+
/*
* watchdog_cdev_register: register watchdog character device
* @wdd: watchdog device
- * @devno: character device number
*
* Register a watchdog character device including handling the legacy
* /dev/watchdog node. /dev/watchdog is actually a miscdevice and
* thus we set it up like that.
*/
-static int watchdog_cdev_register(struct watchdog_device *wdd, dev_t devno)
+static int watchdog_cdev_register(struct watchdog_device *wdd)
{
struct watchdog_core_data *wd_data;
int err;
@@ -962,7 +966,6 @@ static int watchdog_cdev_register(struct watchdog_device *wdd, dev_t devno)
wd_data = kzalloc(sizeof(struct watchdog_core_data), GFP_KERNEL);
if (!wd_data)
return -ENOMEM;
- kref_init(&wd_data->kref);
mutex_init(&wd_data->lock);
wd_data->wdd = wdd;
@@ -991,23 +994,33 @@ static int watchdog_cdev_register(struct watchdog_device *wdd, dev_t devno)
}
}
+ device_initialize(&wd_data->dev);
+ wd_data->dev.devt = MKDEV(MAJOR(watchdog_devt), wdd->id);
+ wd_data->dev.class = &watchdog_class;
+ wd_data->dev.parent = wdd->parent;
+ wd_data->dev.groups = wdd->groups;
+ wd_data->dev.release = watchdog_core_data_release;
+ dev_set_drvdata(&wd_data->dev, wdd);
+ dev_set_name(&wd_data->dev, "watchdog%d", wdd->id);
+
/* Fill in the data structures */
cdev_init(&wd_data->cdev, &watchdog_fops);
- wd_data->cdev.owner = wdd->ops->owner;
/* Add the device */
- err = cdev_add(&wd_data->cdev, devno, 1);
+ err = cdev_device_add(&wd_data->cdev, &wd_data->dev);
if (err) {
pr_err("watchdog%d unable to add device %d:%d\n",
wdd->id, MAJOR(watchdog_devt), wdd->id);
if (wdd->id == 0) {
misc_deregister(&watchdog_miscdev);
old_wd_data = NULL;
- kref_put(&wd_data->kref, watchdog_core_data_release);
+ put_device(&wd_data->dev);
}
return err;
}
+ wd_data->cdev.owner = wdd->ops->owner;
+
/* Record time of most recent heartbeat as 'just before now'. */
wd_data->last_hw_keepalive = ktime_sub(ktime_get(), 1);
watchdog_set_open_deadline(wd_data);
@@ -1018,7 +1031,7 @@ static int watchdog_cdev_register(struct watchdog_device *wdd, dev_t devno)
*/
if (watchdog_hw_running(wdd)) {
__module_get(wdd->ops->owner);
- kref_get(&wd_data->kref);
+ get_device(&wd_data->dev);
if (handle_boot_enabled)
hrtimer_start(&wd_data->timer, 0,
HRTIMER_MODE_REL_HARD);
@@ -1042,7 +1055,7 @@ static void watchdog_cdev_unregister(struct watchdog_device *wdd)
{
struct watchdog_core_data *wd_data = wdd->wd_data;
- cdev_del(&wd_data->cdev);
+ cdev_device_del(&wd_data->cdev, &wd_data->dev);
if (wdd->id == 0) {
misc_deregister(&watchdog_miscdev);
old_wd_data = NULL;
@@ -1061,15 +1074,9 @@ static void watchdog_cdev_unregister(struct watchdog_device *wdd)
hrtimer_cancel(&wd_data->timer);
kthread_cancel_work_sync(&wd_data->work);
- kref_put(&wd_data->kref, watchdog_core_data_release);
+ put_device(&wd_data->dev);
}
-static struct class watchdog_class = {
- .name = "watchdog",
- .owner = THIS_MODULE,
- .dev_groups = wdt_groups,
-};
-
static int watchdog_reboot_notifier(struct notifier_block *nb,
unsigned long code, void *data)
{
@@ -1100,27 +1107,14 @@ static int watchdog_reboot_notifier(struct notifier_block *nb,
int watchdog_dev_register(struct watchdog_device *wdd)
{
- struct device *dev;
- dev_t devno;
int ret;
- devno = MKDEV(MAJOR(watchdog_devt), wdd->id);
-
- ret = watchdog_cdev_register(wdd, devno);
+ ret = watchdog_cdev_register(wdd);
if (ret)
return ret;
- dev = device_create_with_groups(&watchdog_class, wdd->parent,
- devno, wdd, wdd->groups,
- "watchdog%d", wdd->id);
- if (IS_ERR(dev)) {
- watchdog_cdev_unregister(wdd);
- return PTR_ERR(dev);
- }
-
ret = watchdog_register_pretimeout(wdd);
if (ret) {
- device_destroy(&watchdog_class, devno);
watchdog_cdev_unregister(wdd);
return ret;
}
@@ -1128,7 +1122,8 @@ int watchdog_dev_register(struct watchdog_device *wdd)
if (test_bit(WDOG_STOP_ON_REBOOT, &wdd->status)) {
wdd->reboot_nb.notifier_call = watchdog_reboot_notifier;
- ret = devm_register_reboot_notifier(dev, &wdd->reboot_nb);
+ ret = devm_register_reboot_notifier(&wdd->wd_data->dev,
+ &wdd->reboot_nb);
if (ret) {
pr_err("watchdog%d: Cannot register reboot notifier (%d)\n",
wdd->id, ret);
@@ -1150,7 +1145,6 @@ int watchdog_dev_register(struct watchdog_device *wdd)
void watchdog_dev_unregister(struct watchdog_device *wdd)
{
watchdog_unregister_pretimeout(wdd);
- device_destroy(&watchdog_class, wdd->wd_data->cdev.dev);
watchdog_cdev_unregister(wdd);
}
--
2.20.1
next prev parent reply other threads:[~2019-12-11 16:01 UTC|newest]
Thread overview: 138+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-11 15:09 [PATCH AUTOSEL 5.4 001/134] scsi: lpfc: Fix spinlock_irq issues in lpfc_els_flush_cmd() Sasha Levin
2019-12-11 15:09 ` [PATCH AUTOSEL 5.4 002/134] scsi: lpfc: Fix discovery failures when target device connectivity bounces Sasha Levin
2019-12-11 15:09 ` [PATCH AUTOSEL 5.4 003/134] scsi: mpt3sas: Fix clear pending bit in ioctl status Sasha Levin
2019-12-11 15:09 ` [PATCH AUTOSEL 5.4 004/134] scsi: lpfc: Fix locking on mailbox command completion Sasha Levin
2019-12-11 15:09 ` [PATCH AUTOSEL 5.4 005/134] scsi: mpt3sas: Reject NVMe Encap cmnds to unsupported HBA Sasha Levin
2019-12-11 15:09 ` [PATCH AUTOSEL 5.4 006/134] gpio: mxc: Only get the second IRQ when there is more than one IRQ Sasha Levin
2019-12-11 15:09 ` [PATCH AUTOSEL 5.4 007/134] scsi: lpfc: Fix list corruption in lpfc_sli_get_iocbq Sasha Levin
2019-12-11 15:09 ` [PATCH AUTOSEL 5.4 008/134] Input: atmel_mxt_ts - disable IRQ across suspend Sasha Levin
2019-12-11 15:09 ` [PATCH AUTOSEL 5.4 009/134] f2fs: fix to update time in lazytime mode Sasha Levin
2019-12-11 15:09 ` [PATCH AUTOSEL 5.4 010/134] powerpc/papr_scm: Fix an off-by-one check in papr_scm_meta_{get, set} Sasha Levin
2019-12-11 15:09 ` [PATCH AUTOSEL 5.4 011/134] tools/power/x86/intel-speed-select: Remove warning for unused result Sasha Levin
2019-12-11 15:09 ` [PATCH AUTOSEL 5.4 012/134] platform/x86: peaq-wmi: switch to using polled mode of input devices Sasha Levin
2019-12-11 15:09 ` [PATCH AUTOSEL 5.4 013/134] splice: only read in as much information as there is pipe buffer space Sasha Levin
2019-12-11 15:09 ` [PATCH AUTOSEL 5.4 014/134] iommu: rockchip: Free domain on .domain_free Sasha Levin
2019-12-11 15:09 ` [PATCH AUTOSEL 5.4 015/134] iommu/tegra-smmu: Fix page tables in > 4 GiB memory Sasha Levin
2019-12-11 15:09 ` [PATCH AUTOSEL 5.4 016/134] dmaengine: xilinx_dma: Clear desc_pendingcount in xilinx_dma_reset Sasha Levin
2019-12-11 15:09 ` [PATCH AUTOSEL 5.4 017/134] scsi: target: compare full CHAP_A Algorithm strings Sasha Levin
2019-12-11 15:09 ` [PATCH AUTOSEL 5.4 018/134] scsi: lpfc: Fix hardlockup in lpfc_abort_handler Sasha Levin
2019-12-11 15:09 ` [PATCH AUTOSEL 5.4 019/134] scsi: lpfc: Fix SLI3 hba in loop mode not discovering devices Sasha Levin
2019-12-11 15:09 ` [PATCH AUTOSEL 5.4 020/134] scsi: csiostor: Don't enable IRQs too early Sasha Levin
2019-12-11 15:09 ` [PATCH AUTOSEL 5.4 021/134] scsi: hisi_sas: Replace in_softirq() check in hisi_sas_task_exec() Sasha Levin
2019-12-11 15:09 ` [PATCH AUTOSEL 5.4 022/134] scsi: hisi_sas: Delete the debugfs folder of hisi_sas when the probe fails Sasha Levin
2019-12-11 15:09 ` [PATCH AUTOSEL 5.4 023/134] powerpc/pseries: Mark accumulate_stolen_time() as notrace Sasha Levin
2019-12-11 15:10 ` [PATCH AUTOSEL 5.4 024/134] powerpc/pseries: Don't fail hash page table insert for bolted mapping Sasha Levin
2019-12-11 15:10 ` [PATCH AUTOSEL 5.4 025/134] Input: st1232 - do not reset the chip too early Sasha Levin
2019-12-11 15:10 ` [PATCH AUTOSEL 5.4 026/134] selftests/powerpc: Fixup clobbers for TM tests Sasha Levin
2019-12-11 15:10 ` [PATCH AUTOSEL 5.4 027/134] powerpc/tools: Don't quote $objdump in scripts Sasha Levin
2019-12-11 15:10 ` [PATCH AUTOSEL 5.4 028/134] dma-debug: add a schedule point in debug_dma_dump_mappings() Sasha Levin
2019-12-11 15:10 ` [PATCH AUTOSEL 5.4 029/134] dma-mapping: Add vmap checks to dma_map_single() Sasha Levin
2019-12-11 15:10 ` [PATCH AUTOSEL 5.4 030/134] dma-mapping: fix handling of dma-ranges for reserved memory (again) Sasha Levin
2019-12-11 15:10 ` [PATCH AUTOSEL 5.4 031/134] dmaengine: fsl-qdma: Handle invalid qdma-queue0 IRQ Sasha Levin
2019-12-11 15:10 ` [PATCH AUTOSEL 5.4 032/134] leds: lm3692x: Handle failure to probe the regulator Sasha Levin
2019-12-14 8:42 ` Pavel Machek
2019-12-11 15:10 ` [PATCH AUTOSEL 5.4 033/134] leds: an30259a: add a check for devm_regmap_init_i2c Sasha Levin
2019-12-14 8:42 ` Pavel Machek
2019-12-11 15:10 ` [PATCH AUTOSEL 5.4 034/134] leds: trigger: netdev: fix handling on interface rename Sasha Levin
2019-12-14 8:43 ` Pavel Machek
2019-12-14 18:11 ` Sasha Levin
2019-12-11 15:10 ` [PATCH AUTOSEL 5.4 035/134] clocksource/drivers/asm9260: Add a check for of_clk_get Sasha Levin
2019-12-11 15:10 ` [PATCH AUTOSEL 5.4 036/134] clocksource/drivers/timer-of: Use unique device name instead of timer Sasha Levin
2019-12-11 15:10 ` [PATCH AUTOSEL 5.4 037/134] dtc: Use pkg-config to locate libyaml Sasha Levin
2019-12-11 15:10 ` [PATCH AUTOSEL 5.4 038/134] selftests/powerpc: Skip tm-signal-sigreturn-nt if TM not available Sasha Levin
2019-12-11 15:10 ` [PATCH AUTOSEL 5.4 039/134] powerpc/security/book3s64: Report L1TF status in sysfs Sasha Levin
2019-12-11 15:10 ` [PATCH AUTOSEL 5.4 040/134] powerpc/book3s64/hash: Add cond_resched to avoid soft lockup warning Sasha Levin
2019-12-11 15:10 ` [PATCH AUTOSEL 5.4 041/134] ext4: update direct I/O read lock pattern for IOCB_NOWAIT Sasha Levin
2019-12-11 15:10 ` [PATCH AUTOSEL 5.4 042/134] ext4: iomap that extends beyond EOF should be marked dirty Sasha Levin
2019-12-11 15:10 ` [PATCH AUTOSEL 5.4 043/134] jbd2: Fix statistics for the number of logged blocks Sasha Levin
2019-12-11 15:10 ` [PATCH AUTOSEL 5.4 044/134] scsi: tracing: Fix handling of TRANSFER LENGTH == 0 for READ(6) and WRITE(6) Sasha Levin
2019-12-11 15:10 ` [PATCH AUTOSEL 5.4 045/134] scsi: lpfc: Fix unexpected error messages during RSCN handling Sasha Levin
2019-12-11 15:10 ` [PATCH AUTOSEL 5.4 046/134] scsi: lpfc: Fix duplicate unreg_rpi error in port offline flow Sasha Levin
2019-12-11 15:10 ` [PATCH AUTOSEL 5.4 047/134] f2fs: fix to update dir's i_pino during cross_rename Sasha Levin
2019-12-11 15:10 ` [PATCH AUTOSEL 5.4 048/134] clk: qcom: smd: Add missing pnoc clock Sasha Levin
2019-12-11 15:10 ` [PATCH AUTOSEL 5.4 049/134] clk: qcom: Allow constant ratio freq tables for rcg Sasha Levin
2019-12-11 15:10 ` [PATCH AUTOSEL 5.4 050/134] clk: clk-gpio: propagate rate change to parent Sasha Levin
2019-12-11 15:10 ` [PATCH AUTOSEL 5.4 051/134] scsi: qla2xxx: Fix a dma_pool_free() call Sasha Levin
2019-12-11 15:10 ` [PATCH AUTOSEL 5.4 052/134] irqchip/irq-bcm7038-l1: Enable parent IRQ if necessary Sasha Levin
2019-12-11 15:10 ` [PATCH AUTOSEL 5.4 053/134] irqchip: ingenic: Error out if IRQ domain creation failed Sasha Levin
2019-12-11 15:10 ` [PATCH AUTOSEL 5.4 054/134] dma-direct: check for overflows on 32 bit DMA addresses Sasha Levin
2019-12-11 15:10 ` [PATCH AUTOSEL 5.4 055/134] mfd: mfd-core: Honour Device Tree's request to disable a child-device Sasha Levin
2019-12-11 15:10 ` [PATCH AUTOSEL 5.4 056/134] fs/quota: handle overflows of sysctl fs.quota.* and report as unsigned long Sasha Levin
2019-12-11 15:10 ` [PATCH AUTOSEL 5.4 057/134] iommu/arm-smmu-v3: Don't display an error when IRQ lines are missing Sasha Levin
2019-12-11 15:10 ` [PATCH AUTOSEL 5.4 058/134] i2c: stm32f7: fix & reorder remove & probe error handling Sasha Levin
2019-12-11 15:10 ` [PATCH AUTOSEL 5.4 059/134] iomap: fix return value of iomap_dio_bio_actor on 32bit systems Sasha Levin
2019-12-11 15:10 ` [PATCH AUTOSEL 5.4 060/134] Input: ili210x - handle errors from input_mt_init_slots() Sasha Levin
2019-12-11 15:10 ` [PATCH AUTOSEL 5.4 061/134] scsi: lpfc: fix: Coverity: lpfc_cmpl_els_rsp(): Null pointer dereferences Sasha Levin
2019-12-11 15:10 ` [PATCH AUTOSEL 5.4 062/134] scsi: zorro_esp: Limit DMA transfers to 65536 bytes (except on Fastlane) Sasha Levin
2019-12-11 15:10 ` [PATCH AUTOSEL 5.4 063/134] PCI: rpaphp: Fix up pointer to first drc-info entry Sasha Levin
2019-12-11 15:10 ` [PATCH AUTOSEL 5.4 064/134] scsi: ufs: fix potential bug which ends in system hang Sasha Levin
2019-12-11 15:10 ` [PATCH AUTOSEL 5.4 065/134] powerpc/pseries/cmm: Implement release() function for sysfs device Sasha Levin
2019-12-11 15:10 ` [PATCH AUTOSEL 5.4 066/134] PCI: rpaphp: Don't rely on firmware feature to imply drc-info support Sasha Levin
2019-12-11 15:10 ` [PATCH AUTOSEL 5.4 067/134] PCI: rpaphp: Annotate and correctly byte swap DRC properties Sasha Levin
2019-12-11 15:10 ` [PATCH AUTOSEL 5.4 068/134] PCI: rpaphp: Correctly match ibm, my-drc-index to drc-name when using drc-info Sasha Levin
2019-12-11 15:10 ` [PATCH AUTOSEL 5.4 069/134] powerpc/security: Fix wrong message when RFI Flush is disable Sasha Levin
2019-12-11 15:10 ` [PATCH AUTOSEL 5.4 070/134] powerpc/eeh: differentiate duplicate detection message Sasha Levin
2019-12-11 15:10 ` [PATCH AUTOSEL 5.4 071/134] powerpc/book3s/mm: Update Oops message to print the correct translation in use Sasha Levin
2019-12-11 15:10 ` [PATCH AUTOSEL 5.4 072/134] scsi: atari_scsi: sun3_scsi: Set sg_tablesize to 1 instead of SG_NONE Sasha Levin
2019-12-11 15:10 ` [PATCH AUTOSEL 5.4 073/134] clk: pxa: fix one of the pxa RTC clocks Sasha Levin
2019-12-11 15:10 ` [PATCH AUTOSEL 5.4 074/134] bcache: at least try to shrink 1 node in bch_mca_scan() Sasha Levin
2019-12-11 15:10 ` [PATCH AUTOSEL 5.4 075/134] HID: quirks: Add quirk for HP MSU1465 PIXART OEM mouse Sasha Levin
2019-12-11 15:10 ` [PATCH AUTOSEL 5.4 076/134] dt-bindings: Improve validation build error handling Sasha Levin
2019-12-11 15:10 ` [PATCH AUTOSEL 5.4 077/134] ext4: fix a bug in ext4_wait_for_tail_page_commit Sasha Levin
2019-12-11 15:10 ` [PATCH AUTOSEL 5.4 078/134] HID: logitech-hidpp: Silence intermittent get_battery_capacity errors Sasha Levin
2019-12-11 15:10 ` [PATCH AUTOSEL 5.4 079/134] HID: i2c-hid: fix no irq after reset on raydium 3118 Sasha Levin
2019-12-11 15:10 ` [PATCH AUTOSEL 5.4 080/134] ARM: 8937/1: spectre-v2: remove Brahma-B53 from hardening Sasha Levin
2019-12-11 15:10 ` [PATCH AUTOSEL 5.4 081/134] libnvdimm/btt: fix variable 'rc' set but not used Sasha Levin
2019-12-11 15:10 ` [PATCH AUTOSEL 5.4 082/134] HID: Improve Windows Precision Touchpad detection Sasha Levin
2019-12-11 15:10 ` [PATCH AUTOSEL 5.4 083/134] HID: rmi: Check that the RMI_STARTED bit is set before unregistering the RMI transport device Sasha Levin
2019-12-11 15:11 ` [PATCH AUTOSEL 5.4 084/134] watchdog: imx7ulp: Fix reboot hang Sasha Levin
2019-12-11 15:11 ` [PATCH AUTOSEL 5.4 085/134] watchdog: aspeed: Fix clock behaviour for ast2600 Sasha Levin
2019-12-11 15:11 ` [PATCH AUTOSEL 5.4 086/134] watchdog: prevent deferral of watchdogd wakeup on RT Sasha Levin
2019-12-11 15:11 ` Sasha Levin [this message]
2019-12-11 15:11 ` [PATCH AUTOSEL 5.4 088/134] powerpc/fixmap: Use __fix_to_virt() instead of fix_to_virt() Sasha Levin
2019-12-11 15:11 ` [PATCH AUTOSEL 5.4 089/134] ext4: work around deleting a file with i_nlink == 0 safely Sasha Levin
2019-12-11 15:11 ` [PATCH AUTOSEL 5.4 090/134] clk: Fix memory leak in clk_unregister() Sasha Levin
2019-12-11 15:11 ` [PATCH AUTOSEL 5.4 091/134] scsi: pm80xx: Fix for SATA device discovery Sasha Levin
2019-12-11 15:11 ` [PATCH AUTOSEL 5.4 092/134] scsi: ufs: Fix error handing during hibern8 enter Sasha Levin
2019-12-11 15:11 ` [PATCH AUTOSEL 5.4 093/134] scsi: scsi_debug: num_tgts must be >= 0 Sasha Levin
2019-12-11 15:11 ` [PATCH AUTOSEL 5.4 094/134] scsi: NCR5380: Add disconnect_mask module parameter Sasha Levin
2019-12-11 15:11 ` [PATCH AUTOSEL 5.4 095/134] scsi: target: core: Release SPC-2 reservations when closing a session Sasha Levin
2019-12-11 15:11 ` [PATCH AUTOSEL 5.4 096/134] scsi: ufs: Fix up auto hibern8 enablement Sasha Levin
2019-12-11 15:11 ` [PATCH AUTOSEL 5.4 097/134] scsi: iscsi: Don't send data to unbound connection Sasha Levin
2019-12-11 15:11 ` [PATCH AUTOSEL 5.4 098/134] scsi: target: iscsi: Wait for all commands to finish before freeing a session Sasha Levin
2019-12-11 15:11 ` [PATCH AUTOSEL 5.4 099/134] f2fs: Fix deadlock in f2fs_gc() context during atomic files handling Sasha Levin
2019-12-11 15:11 ` [PATCH AUTOSEL 5.4 100/134] habanalabs: skip VA block list update in reset flow Sasha Levin
2019-12-11 15:11 ` [PATCH AUTOSEL 5.4 101/134] gpio/mpc8xxx: fix qoriq GPIO reading Sasha Levin
2019-12-11 15:11 ` [PATCH AUTOSEL 5.4 102/134] platform/x86: intel_pmc_core: Fix the SoC naming inconsistency Sasha Levin
2019-12-11 15:11 ` [PATCH AUTOSEL 5.4 103/134] platform/x86: intel_pmc_core: Add Comet Lake (CML) platform support to intel_pmc_core driver Sasha Levin
2019-12-11 15:11 ` [PATCH AUTOSEL 5.4 104/134] gpio: mpc8xxx: Don't overwrite default irq_set_type callback Sasha Levin
2019-12-11 15:11 ` [PATCH AUTOSEL 5.4 105/134] gpio: lynxpoint: Setup correct IRQ handlers Sasha Levin
2019-12-11 15:11 ` [PATCH AUTOSEL 5.4 106/134] tools/power/x86/intel-speed-select: Ignore missing config level Sasha Levin
2019-12-11 15:11 ` [PATCH AUTOSEL 5.4 107/134] Drivers: hv: vmbus: Fix crash handler reset of Hyper-V synic Sasha Levin
2019-12-11 15:11 ` [PATCH AUTOSEL 5.4 108/134] apparmor: fix unsigned len comparison with less than zero Sasha Levin
2019-12-11 15:11 ` [PATCH AUTOSEL 5.4 109/134] drm/amdgpu: Call find_vma under mmap_sem Sasha Levin
2019-12-11 15:11 ` [PATCH AUTOSEL 5.4 110/134] scripts/kallsyms: fix definitely-lost memory leak Sasha Levin
2019-12-11 15:11 ` [PATCH AUTOSEL 5.4 111/134] powerpc: Don't add -mabi= flags when building with Clang Sasha Levin
2019-12-11 15:11 ` [PATCH AUTOSEL 5.4 112/134] f2fs: choose hardlimit when softlimit is larger than hardlimit in f2fs_statfs_project() Sasha Levin
2019-12-11 15:11 ` [PATCH AUTOSEL 5.4 113/134] cifs: Fix use-after-free bug in cifs_reconnect() Sasha Levin
2019-12-11 15:11 ` [PATCH AUTOSEL 5.4 114/134] um: virtio: Keep reading on -EAGAIN Sasha Levin
2019-12-11 15:11 ` [PATCH AUTOSEL 5.4 115/134] io_uring: io_allocate_scq_urings() should return a sane state Sasha Levin
2019-12-11 15:11 ` [PATCH AUTOSEL 5.4 116/134] of: unittest: fix memory leak in attach_node_and_children Sasha Levin
2019-12-11 15:11 ` [PATCH AUTOSEL 5.4 117/134] cdrom: respect device capabilities during opening action Sasha Levin
2019-12-11 15:11 ` [PATCH AUTOSEL 5.4 118/134] cifs: move cifsFileInfo_put logic into a work-queue Sasha Levin
2019-12-11 15:11 ` [PATCH AUTOSEL 5.4 119/134] perf diff: Use llabs() with 64-bit values Sasha Levin
2019-12-11 15:11 ` [PATCH AUTOSEL 5.4 120/134] perf script: Fix invalid LBR/binary mismatch error Sasha Levin
2019-12-11 15:11 ` [PATCH AUTOSEL 5.4 121/134] perf script: Fix brstackinsn for AUXTRACE Sasha Levin
2019-12-11 15:11 ` [PATCH AUTOSEL 5.4 122/134] perf regs: Make perf_reg_name() return "unknown" instead of NULL Sasha Levin
2019-12-11 15:11 ` [PATCH AUTOSEL 5.4 123/134] s390/zcrypt: handle new reply code FILTERED_BY_HYPERVISOR Sasha Levin
2019-12-11 15:11 ` [PATCH AUTOSEL 5.4 124/134] mailbox: imx: Clear the right interrupts at shutdown Sasha Levin
2019-12-11 15:11 ` [PATCH AUTOSEL 5.4 125/134] libfdt: define INT32_MAX and UINT32_MAX in libfdt_env.h Sasha Levin
2019-12-11 15:11 ` [PATCH AUTOSEL 5.4 126/134] s390/unwind: filter out unreliable bogus %r14 Sasha Levin
2019-12-11 15:11 ` [PATCH AUTOSEL 5.4 127/134] s390/cpum_sf: Check for SDBT and SDB consistency Sasha Levin
2019-12-11 15:11 ` [PATCH AUTOSEL 5.4 128/134] ocfs2: fix passing zero to 'PTR_ERR' warning Sasha Levin
2019-12-11 15:11 ` [PATCH AUTOSEL 5.4 129/134] mailbox: imx: Fix Tx doorbell shutdown path Sasha Levin
2019-12-11 15:11 ` [PATCH AUTOSEL 5.4 130/134] s390: disable preemption when switching to nodat stack with CALL_ON_STACK Sasha Levin
2019-12-11 15:11 ` [PATCH AUTOSEL 5.4 131/134] selftests: vm: add fragment CONFIG_TEST_VMALLOC Sasha Levin
2019-12-11 15:11 ` [PATCH AUTOSEL 5.4 132/134] mm/hugetlbfs: fix error handling when setting up mounts Sasha Levin
2019-12-11 15:11 ` [PATCH AUTOSEL 5.4 133/134] kernel: sysctl: make drop_caches write-only Sasha Levin
2019-12-11 15:11 ` [PATCH AUTOSEL 5.4 134/134] userfaultfd: require CAP_SYS_PTRACE for UFFD_FEATURE_EVENT_FORK Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191211151150.19073-87-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=haokexin@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-watchdog@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=stable@vger.kernel.org \
--cc=wim@linux-watchdog.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox