From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Steve Wise <larrystevenwise@gmail.com>,
Doug Ledford <dledford@redhat.com>,
Sasha Levin <sashal@kernel.org>,
linux-rdma@vger.kernel.org
Subject: [PATCH AUTOSEL 4.19 13/34] rxe: correctly calculate iCRC for unaligned payloads
Date: Fri, 20 Dec 2019 09:34:12 -0500 [thread overview]
Message-ID: <20191220143433.9922-13-sashal@kernel.org> (raw)
In-Reply-To: <20191220143433.9922-1-sashal@kernel.org>
From: Steve Wise <larrystevenwise@gmail.com>
[ Upstream commit 2030abddec6884aaf5892f5724c48fc340e6826f ]
If RoCE PDUs being sent or received contain pad bytes, then the iCRC
is miscalculated, resulting in PDUs being emitted by RXE with an incorrect
iCRC, as well as ingress PDUs being dropped due to erroneously detecting
a bad iCRC in the PDU. The fix is to include the pad bytes, if any,
in iCRC computations.
Note: This bug has caused broken on-the-wire compatibility with actual
hardware RoCE devices since the soft-RoCE driver was first put into the
mainstream kernel. Fixing it will create an incompatibility with the
original soft-RoCE devices, but is necessary to be compatible with real
hardware devices.
Fixes: 8700e3e7c485 ("Soft RoCE driver")
Signed-off-by: Steve Wise <larrystevenwise@gmail.com>
Link: https://lore.kernel.org/r/20191203020319.15036-2-larrystevenwise@gmail.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/infiniband/sw/rxe/rxe_recv.c | 2 +-
drivers/infiniband/sw/rxe/rxe_req.c | 6 ++++++
drivers/infiniband/sw/rxe/rxe_resp.c | 7 +++++++
3 files changed, 14 insertions(+), 1 deletion(-)
diff --git a/drivers/infiniband/sw/rxe/rxe_recv.c b/drivers/infiniband/sw/rxe/rxe_recv.c
index d30dbac24583a..695a607e2d14c 100644
--- a/drivers/infiniband/sw/rxe/rxe_recv.c
+++ b/drivers/infiniband/sw/rxe/rxe_recv.c
@@ -391,7 +391,7 @@ void rxe_rcv(struct sk_buff *skb)
calc_icrc = rxe_icrc_hdr(pkt, skb);
calc_icrc = rxe_crc32(rxe, calc_icrc, (u8 *)payload_addr(pkt),
- payload_size(pkt));
+ payload_size(pkt) + bth_pad(pkt));
calc_icrc = (__force u32)cpu_to_be32(~calc_icrc);
if (unlikely(calc_icrc != pack_icrc)) {
if (skb->protocol == htons(ETH_P_IPV6))
diff --git a/drivers/infiniband/sw/rxe/rxe_req.c b/drivers/infiniband/sw/rxe/rxe_req.c
index f7dd8de799415..1c1eae0ef8c28 100644
--- a/drivers/infiniband/sw/rxe/rxe_req.c
+++ b/drivers/infiniband/sw/rxe/rxe_req.c
@@ -500,6 +500,12 @@ static int fill_packet(struct rxe_qp *qp, struct rxe_send_wqe *wqe,
if (err)
return err;
}
+ if (bth_pad(pkt)) {
+ u8 *pad = payload_addr(pkt) + paylen;
+
+ memset(pad, 0, bth_pad(pkt));
+ crc = rxe_crc32(rxe, crc, pad, bth_pad(pkt));
+ }
}
p = payload_addr(pkt) + paylen + bth_pad(pkt);
diff --git a/drivers/infiniband/sw/rxe/rxe_resp.c b/drivers/infiniband/sw/rxe/rxe_resp.c
index 681d8e0913d06..9078cfd3b8bdd 100644
--- a/drivers/infiniband/sw/rxe/rxe_resp.c
+++ b/drivers/infiniband/sw/rxe/rxe_resp.c
@@ -737,6 +737,13 @@ static enum resp_states read_reply(struct rxe_qp *qp,
if (err)
pr_err("Failed copying memory\n");
+ if (bth_pad(&ack_pkt)) {
+ struct rxe_dev *rxe = to_rdev(qp->ibqp.device);
+ u8 *pad = payload_addr(&ack_pkt) + payload;
+
+ memset(pad, 0, bth_pad(&ack_pkt));
+ icrc = rxe_crc32(rxe, icrc, pad, bth_pad(&ack_pkt));
+ }
p = payload_addr(&ack_pkt) + payload + bth_pad(&ack_pkt);
*p = ~icrc;
--
2.20.1
next prev parent reply other threads:[~2019-12-20 14:36 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-20 14:34 [PATCH AUTOSEL 4.19 01/34] nvme_fc: add module to ops template to allow module references Sasha Levin
2019-12-20 14:34 ` [PATCH AUTOSEL 4.19 02/34] nvme-fc: fix double-free scenarios on hw queues Sasha Levin
2019-12-20 14:34 ` [PATCH AUTOSEL 4.19 03/34] drm/amdgpu: add check before enabling/disabling broadcast mode Sasha Levin
2019-12-20 14:34 ` [PATCH AUTOSEL 4.19 04/34] drm/amdgpu: add cache flush workaround to gfx8 emit_fence Sasha Levin
2019-12-20 14:34 ` [PATCH AUTOSEL 4.19 05/34] drm/amd/display: Fixed kernel panic when booting with DP-to-HDMI dongle Sasha Levin
2019-12-20 14:34 ` [PATCH AUTOSEL 4.19 06/34] iio: adc: max9611: Fix too short conversion time delay Sasha Levin
2019-12-20 14:34 ` [PATCH AUTOSEL 4.19 07/34] PM / devfreq: Fix devfreq_notifier_call returning errno Sasha Levin
2019-12-20 14:34 ` [PATCH AUTOSEL 4.19 08/34] PM / devfreq: Set scaling_max_freq to max on OPP notifier error Sasha Levin
2019-12-20 14:34 ` [PATCH AUTOSEL 4.19 09/34] PM / devfreq: Don't fail devfreq_dev_release if not in list Sasha Levin
2019-12-20 14:34 ` [PATCH AUTOSEL 4.19 10/34] afs: Fix afs_find_server lookups for ipv4 peers Sasha Levin
2019-12-20 14:34 ` [PATCH AUTOSEL 4.19 11/34] afs: Fix SELinux setting security label on /afs Sasha Levin
2019-12-20 14:34 ` [PATCH AUTOSEL 4.19 12/34] RDMA/cma: add missed unregister_pernet_subsys in init failure Sasha Levin
2019-12-20 14:34 ` Sasha Levin [this message]
2019-12-20 14:34 ` [PATCH AUTOSEL 4.19 14/34] scsi: lpfc: Fix memory leak on lpfc_bsg_write_ebuf_set func Sasha Levin
2019-12-20 14:34 ` [PATCH AUTOSEL 4.19 15/34] scsi: qla2xxx: Drop superfluous INIT_WORK of del_work Sasha Levin
2019-12-20 14:34 ` [PATCH AUTOSEL 4.19 16/34] scsi: qla2xxx: Don't call qlt_async_event twice Sasha Levin
2019-12-20 14:34 ` [PATCH AUTOSEL 4.19 17/34] scsi: qla2xxx: Fix PLOGI payload and ELS IOCB dump length Sasha Levin
2019-12-20 14:34 ` [PATCH AUTOSEL 4.19 18/34] scsi: qla2xxx: Configure local loop for N2N target Sasha Levin
2019-12-20 14:34 ` [PATCH AUTOSEL 4.19 19/34] scsi: qla2xxx: Send Notify ACK after N2N PLOGI Sasha Levin
2019-12-20 14:34 ` [PATCH AUTOSEL 4.19 20/34] scsi: qla2xxx: Ignore PORT UPDATE " Sasha Levin
2019-12-20 14:34 ` [PATCH AUTOSEL 4.19 21/34] scsi: iscsi: qla4xxx: fix double free in probe Sasha Levin
2019-12-20 14:34 ` [PATCH AUTOSEL 4.19 22/34] scsi: libsas: stop discovering if oob mode is disconnected Sasha Levin
2019-12-20 14:34 ` [PATCH AUTOSEL 4.19 23/34] drm/nouveau: Move the declaration of struct nouveau_conn_atom up a bit Sasha Levin
2019-12-20 14:34 ` [PATCH AUTOSEL 4.19 24/34] usb: gadget: fix wrong endpoint desc Sasha Levin
2019-12-20 14:34 ` [PATCH AUTOSEL 4.19 25/34] net: make socket read/write_iter() honor IOCB_NOWAIT Sasha Levin
2019-12-20 14:34 ` [PATCH AUTOSEL 4.19 26/34] afs: Fix creation calls in the dynamic root to fail with EOPNOTSUPP Sasha Levin
2019-12-20 14:34 ` [PATCH AUTOSEL 4.19 27/34] md: raid1: check rdev before reference in raid1_sync_request func Sasha Levin
2019-12-20 14:34 ` [PATCH AUTOSEL 4.19 28/34] s390/cpum_sf: Adjust sampling interval to avoid hitting sample limits Sasha Levin
2019-12-20 14:34 ` [PATCH AUTOSEL 4.19 29/34] s390/cpum_sf: Avoid SBD overflow condition in irq handler Sasha Levin
2019-12-20 14:34 ` [PATCH AUTOSEL 4.19 30/34] IB/mlx4: Follow mirror sequence of device add during device removal Sasha Levin
2019-12-20 14:34 ` [PATCH AUTOSEL 4.19 31/34] IB/mlx5: Fix steering rule of drop and count Sasha Levin
2019-12-20 14:34 ` [PATCH AUTOSEL 4.19 32/34] xen-blkback: prevent premature module unload Sasha Levin
2019-12-20 14:34 ` [PATCH AUTOSEL 4.19 33/34] xen/balloon: fix ballooned page accounting without hotplug enabled Sasha Levin
2019-12-20 14:34 ` [PATCH AUTOSEL 4.19 34/34] PM / hibernate: memory_bm_find_bit(): Tighten node optimisation Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191220143433.9922-13-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=dledford@redhat.com \
--cc=larrystevenwise@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rdma@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).