From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Florian Westphal <fw@strlen.de>, Phil Sutter <phil@nwl.cc>,
Pablo Neira Ayuso <pablo@netfilter.org>,
Sasha Levin <sashal@kernel.org>,
linux-kselftest@vger.kernel.org
Subject: [PATCH AUTOSEL 5.4 024/187] selftests: netfilter: use randomized netns names
Date: Fri, 27 Dec 2019 12:38:12 -0500 [thread overview]
Message-ID: <20191227174055.4923-24-sashal@kernel.org> (raw)
In-Reply-To: <20191227174055.4923-1-sashal@kernel.org>
From: Florian Westphal <fw@strlen.de>
[ Upstream commit 5a2e6af81807d4616f9839ad0ae7d1313b45c64d ]
Using ns0, ns1, etc. isn't a good idea, they might exist already.
Use a random suffix.
Also, older nft versions don't support "-" as alias for stdin, so
use /dev/stdin instead.
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
tools/testing/selftests/netfilter/nft_nat.sh | 332 ++++++++++---------
1 file changed, 176 insertions(+), 156 deletions(-)
diff --git a/tools/testing/selftests/netfilter/nft_nat.sh b/tools/testing/selftests/netfilter/nft_nat.sh
index 1be55e705780..d7e07f4c3d7f 100755
--- a/tools/testing/selftests/netfilter/nft_nat.sh
+++ b/tools/testing/selftests/netfilter/nft_nat.sh
@@ -8,9 +8,14 @@ ksft_skip=4
ret=0
test_inet_nat=true
+sfx=$(mktemp -u "XXXXXXXX")
+ns0="ns0-$sfx"
+ns1="ns1-$sfx"
+ns2="ns2-$sfx"
+
cleanup()
{
- for i in 0 1 2; do ip netns del ns$i;done
+ for i in 0 1 2; do ip netns del ns$i-"$sfx";done
}
nft --version > /dev/null 2>&1
@@ -25,40 +30,49 @@ if [ $? -ne 0 ];then
exit $ksft_skip
fi
-ip netns add ns0
+ip netns add "$ns0"
if [ $? -ne 0 ];then
- echo "SKIP: Could not create net namespace"
+ echo "SKIP: Could not create net namespace $ns0"
exit $ksft_skip
fi
trap cleanup EXIT
-ip netns add ns1
-ip netns add ns2
+ip netns add "$ns1"
+if [ $? -ne 0 ];then
+ echo "SKIP: Could not create net namespace $ns1"
+ exit $ksft_skip
+fi
+
+ip netns add "$ns2"
+if [ $? -ne 0 ];then
+ echo "SKIP: Could not create net namespace $ns2"
+ exit $ksft_skip
+fi
-ip link add veth0 netns ns0 type veth peer name eth0 netns ns1 > /dev/null 2>&1
+ip link add veth0 netns "$ns0" type veth peer name eth0 netns "$ns1" > /dev/null 2>&1
if [ $? -ne 0 ];then
echo "SKIP: No virtual ethernet pair device support in kernel"
exit $ksft_skip
fi
-ip link add veth1 netns ns0 type veth peer name eth0 netns ns2
+ip link add veth1 netns "$ns0" type veth peer name eth0 netns "$ns2"
-ip -net ns0 link set lo up
-ip -net ns0 link set veth0 up
-ip -net ns0 addr add 10.0.1.1/24 dev veth0
-ip -net ns0 addr add dead:1::1/64 dev veth0
+ip -net "$ns0" link set lo up
+ip -net "$ns0" link set veth0 up
+ip -net "$ns0" addr add 10.0.1.1/24 dev veth0
+ip -net "$ns0" addr add dead:1::1/64 dev veth0
-ip -net ns0 link set veth1 up
-ip -net ns0 addr add 10.0.2.1/24 dev veth1
-ip -net ns0 addr add dead:2::1/64 dev veth1
+ip -net "$ns0" link set veth1 up
+ip -net "$ns0" addr add 10.0.2.1/24 dev veth1
+ip -net "$ns0" addr add dead:2::1/64 dev veth1
for i in 1 2; do
- ip -net ns$i link set lo up
- ip -net ns$i link set eth0 up
- ip -net ns$i addr add 10.0.$i.99/24 dev eth0
- ip -net ns$i route add default via 10.0.$i.1
- ip -net ns$i addr add dead:$i::99/64 dev eth0
- ip -net ns$i route add default via dead:$i::1
+ ip -net ns$i-$sfx link set lo up
+ ip -net ns$i-$sfx link set eth0 up
+ ip -net ns$i-$sfx addr add 10.0.$i.99/24 dev eth0
+ ip -net ns$i-$sfx route add default via 10.0.$i.1
+ ip -net ns$i-$sfx addr add dead:$i::99/64 dev eth0
+ ip -net ns$i-$sfx route add default via dead:$i::1
done
bad_counter()
@@ -66,8 +80,9 @@ bad_counter()
local ns=$1
local counter=$2
local expect=$3
+ local tag=$4
- echo "ERROR: $counter counter in $ns has unexpected value (expected $expect)" 1>&2
+ echo "ERROR: $counter counter in $ns has unexpected value (expected $expect) at $tag" 1>&2
ip netns exec $ns nft list counter inet filter $counter 1>&2
}
@@ -78,24 +93,24 @@ check_counters()
cnt=$(ip netns exec $ns nft list counter inet filter ns0in | grep -q "packets 1 bytes 84")
if [ $? -ne 0 ]; then
- bad_counter $ns ns0in "packets 1 bytes 84"
+ bad_counter $ns ns0in "packets 1 bytes 84" "check_counters 1"
lret=1
fi
cnt=$(ip netns exec $ns nft list counter inet filter ns0out | grep -q "packets 1 bytes 84")
if [ $? -ne 0 ]; then
- bad_counter $ns ns0out "packets 1 bytes 84"
+ bad_counter $ns ns0out "packets 1 bytes 84" "check_counters 2"
lret=1
fi
expect="packets 1 bytes 104"
cnt=$(ip netns exec $ns nft list counter inet filter ns0in6 | grep -q "$expect")
if [ $? -ne 0 ]; then
- bad_counter $ns ns0in6 "$expect"
+ bad_counter $ns ns0in6 "$expect" "check_counters 3"
lret=1
fi
cnt=$(ip netns exec $ns nft list counter inet filter ns0out6 | grep -q "$expect")
if [ $? -ne 0 ]; then
- bad_counter $ns ns0out6 "$expect"
+ bad_counter $ns ns0out6 "$expect" "check_counters 4"
lret=1
fi
@@ -107,41 +122,41 @@ check_ns0_counters()
local ns=$1
local lret=0
- cnt=$(ip netns exec ns0 nft list counter inet filter ns0in | grep -q "packets 0 bytes 0")
+ cnt=$(ip netns exec "$ns0" nft list counter inet filter ns0in | grep -q "packets 0 bytes 0")
if [ $? -ne 0 ]; then
- bad_counter ns0 ns0in "packets 0 bytes 0"
+ bad_counter "$ns0" ns0in "packets 0 bytes 0" "check_ns0_counters 1"
lret=1
fi
- cnt=$(ip netns exec ns0 nft list counter inet filter ns0in6 | grep -q "packets 0 bytes 0")
+ cnt=$(ip netns exec "$ns0" nft list counter inet filter ns0in6 | grep -q "packets 0 bytes 0")
if [ $? -ne 0 ]; then
- bad_counter ns0 ns0in6 "packets 0 bytes 0"
+ bad_counter "$ns0" ns0in6 "packets 0 bytes 0"
lret=1
fi
- cnt=$(ip netns exec ns0 nft list counter inet filter ns0out | grep -q "packets 0 bytes 0")
+ cnt=$(ip netns exec "$ns0" nft list counter inet filter ns0out | grep -q "packets 0 bytes 0")
if [ $? -ne 0 ]; then
- bad_counter ns0 ns0out "packets 0 bytes 0"
+ bad_counter "$ns0" ns0out "packets 0 bytes 0" "check_ns0_counters 2"
lret=1
fi
- cnt=$(ip netns exec ns0 nft list counter inet filter ns0out6 | grep -q "packets 0 bytes 0")
+ cnt=$(ip netns exec "$ns0" nft list counter inet filter ns0out6 | grep -q "packets 0 bytes 0")
if [ $? -ne 0 ]; then
- bad_counter ns0 ns0out6 "packets 0 bytes 0"
+ bad_counter "$ns0" ns0out6 "packets 0 bytes 0" "check_ns0_counters3 "
lret=1
fi
for dir in "in" "out" ; do
expect="packets 1 bytes 84"
- cnt=$(ip netns exec ns0 nft list counter inet filter ${ns}${dir} | grep -q "$expect")
+ cnt=$(ip netns exec "$ns0" nft list counter inet filter ${ns}${dir} | grep -q "$expect")
if [ $? -ne 0 ]; then
- bad_counter ns0 $ns$dir "$expect"
+ bad_counter "$ns0" $ns$dir "$expect" "check_ns0_counters 4"
lret=1
fi
expect="packets 1 bytes 104"
- cnt=$(ip netns exec ns0 nft list counter inet filter ${ns}${dir}6 | grep -q "$expect")
+ cnt=$(ip netns exec "$ns0" nft list counter inet filter ${ns}${dir}6 | grep -q "$expect")
if [ $? -ne 0 ]; then
- bad_counter ns0 $ns$dir6 "$expect"
+ bad_counter "$ns0" $ns$dir6 "$expect" "check_ns0_counters 5"
lret=1
fi
done
@@ -152,7 +167,7 @@ check_ns0_counters()
reset_counters()
{
for i in 0 1 2;do
- ip netns exec ns$i nft reset counters inet > /dev/null
+ ip netns exec ns$i-$sfx nft reset counters inet > /dev/null
done
}
@@ -166,7 +181,7 @@ test_local_dnat6()
IPF="ip6"
fi
-ip netns exec ns0 nft -f - <<EOF
+ip netns exec "$ns0" nft -f /dev/stdin <<EOF
table $family nat {
chain output {
type nat hook output priority 0; policy accept;
@@ -180,7 +195,7 @@ EOF
fi
# ping netns1, expect rewrite to netns2
- ip netns exec ns0 ping -q -c 1 dead:1::99 > /dev/null
+ ip netns exec "$ns0" ping -q -c 1 dead:1::99 > /dev/null
if [ $? -ne 0 ]; then
lret=1
echo "ERROR: ping6 failed"
@@ -189,18 +204,18 @@ EOF
expect="packets 0 bytes 0"
for dir in "in6" "out6" ; do
- cnt=$(ip netns exec ns0 nft list counter inet filter ns1${dir} | grep -q "$expect")
+ cnt=$(ip netns exec "$ns0" nft list counter inet filter ns1${dir} | grep -q "$expect")
if [ $? -ne 0 ]; then
- bad_counter ns0 ns1$dir "$expect"
+ bad_counter "$ns0" ns1$dir "$expect" "test_local_dnat6 1"
lret=1
fi
done
expect="packets 1 bytes 104"
for dir in "in6" "out6" ; do
- cnt=$(ip netns exec ns0 nft list counter inet filter ns2${dir} | grep -q "$expect")
+ cnt=$(ip netns exec "$ns0" nft list counter inet filter ns2${dir} | grep -q "$expect")
if [ $? -ne 0 ]; then
- bad_counter ns0 ns2$dir "$expect"
+ bad_counter "$ns0" ns2$dir "$expect" "test_local_dnat6 2"
lret=1
fi
done
@@ -208,9 +223,9 @@ EOF
# expect 0 count in ns1
expect="packets 0 bytes 0"
for dir in "in6" "out6" ; do
- cnt=$(ip netns exec ns1 nft list counter inet filter ns0${dir} | grep -q "$expect")
+ cnt=$(ip netns exec "$ns1" nft list counter inet filter ns0${dir} | grep -q "$expect")
if [ $? -ne 0 ]; then
- bad_counter ns1 ns0$dir "$expect"
+ bad_counter "$ns1" ns0$dir "$expect" "test_local_dnat6 3"
lret=1
fi
done
@@ -218,15 +233,15 @@ EOF
# expect 1 packet in ns2
expect="packets 1 bytes 104"
for dir in "in6" "out6" ; do
- cnt=$(ip netns exec ns2 nft list counter inet filter ns0${dir} | grep -q "$expect")
+ cnt=$(ip netns exec "$ns2" nft list counter inet filter ns0${dir} | grep -q "$expect")
if [ $? -ne 0 ]; then
- bad_counter ns2 ns0$dir "$expect"
+ bad_counter "$ns2" ns0$dir "$expect" "test_local_dnat6 4"
lret=1
fi
done
- test $lret -eq 0 && echo "PASS: ipv6 ping to ns1 was $family NATted to ns2"
- ip netns exec ns0 nft flush chain ip6 nat output
+ test $lret -eq 0 && echo "PASS: ipv6 ping to $ns1 was $family NATted to $ns2"
+ ip netns exec "$ns0" nft flush chain ip6 nat output
return $lret
}
@@ -241,7 +256,7 @@ test_local_dnat()
IPF="ip"
fi
-ip netns exec ns0 nft -f - <<EOF 2>/dev/null
+ip netns exec "$ns0" nft -f /dev/stdin <<EOF 2>/dev/null
table $family nat {
chain output {
type nat hook output priority 0; policy accept;
@@ -260,7 +275,7 @@ EOF
fi
# ping netns1, expect rewrite to netns2
- ip netns exec ns0 ping -q -c 1 10.0.1.99 > /dev/null
+ ip netns exec "$ns0" ping -q -c 1 10.0.1.99 > /dev/null
if [ $? -ne 0 ]; then
lret=1
echo "ERROR: ping failed"
@@ -269,18 +284,18 @@ EOF
expect="packets 0 bytes 0"
for dir in "in" "out" ; do
- cnt=$(ip netns exec ns0 nft list counter inet filter ns1${dir} | grep -q "$expect")
+ cnt=$(ip netns exec "$ns0" nft list counter inet filter ns1${dir} | grep -q "$expect")
if [ $? -ne 0 ]; then
- bad_counter ns0 ns1$dir "$expect"
+ bad_counter "$ns0" ns1$dir "$expect" "test_local_dnat 1"
lret=1
fi
done
expect="packets 1 bytes 84"
for dir in "in" "out" ; do
- cnt=$(ip netns exec ns0 nft list counter inet filter ns2${dir} | grep -q "$expect")
+ cnt=$(ip netns exec "$ns0" nft list counter inet filter ns2${dir} | grep -q "$expect")
if [ $? -ne 0 ]; then
- bad_counter ns0 ns2$dir "$expect"
+ bad_counter "$ns0" ns2$dir "$expect" "test_local_dnat 2"
lret=1
fi
done
@@ -288,9 +303,9 @@ EOF
# expect 0 count in ns1
expect="packets 0 bytes 0"
for dir in "in" "out" ; do
- cnt=$(ip netns exec ns1 nft list counter inet filter ns0${dir} | grep -q "$expect")
+ cnt=$(ip netns exec "$ns1" nft list counter inet filter ns0${dir} | grep -q "$expect")
if [ $? -ne 0 ]; then
- bad_counter ns1 ns0$dir "$expect"
+ bad_counter "$ns1" ns0$dir "$expect" "test_local_dnat 3"
lret=1
fi
done
@@ -298,19 +313,19 @@ EOF
# expect 1 packet in ns2
expect="packets 1 bytes 84"
for dir in "in" "out" ; do
- cnt=$(ip netns exec ns2 nft list counter inet filter ns0${dir} | grep -q "$expect")
+ cnt=$(ip netns exec "$ns2" nft list counter inet filter ns0${dir} | grep -q "$expect")
if [ $? -ne 0 ]; then
- bad_counter ns2 ns0$dir "$expect"
+ bad_counter "$ns2" ns0$dir "$expect" "test_local_dnat 4"
lret=1
fi
done
- test $lret -eq 0 && echo "PASS: ping to ns1 was $family NATted to ns2"
+ test $lret -eq 0 && echo "PASS: ping to $ns1 was $family NATted to $ns2"
- ip netns exec ns0 nft flush chain $family nat output
+ ip netns exec "$ns0" nft flush chain $family nat output
reset_counters
- ip netns exec ns0 ping -q -c 1 10.0.1.99 > /dev/null
+ ip netns exec "$ns0" ping -q -c 1 10.0.1.99 > /dev/null
if [ $? -ne 0 ]; then
lret=1
echo "ERROR: ping failed"
@@ -319,17 +334,17 @@ EOF
expect="packets 1 bytes 84"
for dir in "in" "out" ; do
- cnt=$(ip netns exec ns0 nft list counter inet filter ns1${dir} | grep -q "$expect")
+ cnt=$(ip netns exec "$ns0" nft list counter inet filter ns1${dir} | grep -q "$expect")
if [ $? -ne 0 ]; then
- bad_counter ns1 ns1$dir "$expect"
+ bad_counter "$ns1" ns1$dir "$expect" "test_local_dnat 5"
lret=1
fi
done
expect="packets 0 bytes 0"
for dir in "in" "out" ; do
- cnt=$(ip netns exec ns0 nft list counter inet filter ns2${dir} | grep -q "$expect")
+ cnt=$(ip netns exec "$ns0" nft list counter inet filter ns2${dir} | grep -q "$expect")
if [ $? -ne 0 ]; then
- bad_counter ns0 ns2$dir "$expect"
+ bad_counter "$ns0" ns2$dir "$expect" "test_local_dnat 6"
lret=1
fi
done
@@ -337,9 +352,9 @@ EOF
# expect 1 count in ns1
expect="packets 1 bytes 84"
for dir in "in" "out" ; do
- cnt=$(ip netns exec ns1 nft list counter inet filter ns0${dir} | grep -q "$expect")
+ cnt=$(ip netns exec "$ns1" nft list counter inet filter ns0${dir} | grep -q "$expect")
if [ $? -ne 0 ]; then
- bad_counter ns0 ns0$dir "$expect"
+ bad_counter "$ns0" ns0$dir "$expect" "test_local_dnat 7"
lret=1
fi
done
@@ -347,14 +362,14 @@ EOF
# expect 0 packet in ns2
expect="packets 0 bytes 0"
for dir in "in" "out" ; do
- cnt=$(ip netns exec ns2 nft list counter inet filter ns0${dir} | grep -q "$expect")
+ cnt=$(ip netns exec "$ns2" nft list counter inet filter ns0${dir} | grep -q "$expect")
if [ $? -ne 0 ]; then
- bad_counter ns2 ns2$dir "$expect"
+ bad_counter "$ns2" ns0$dir "$expect" "test_local_dnat 8"
lret=1
fi
done
- test $lret -eq 0 && echo "PASS: ping to ns1 OK after $family nat output chain flush"
+ test $lret -eq 0 && echo "PASS: ping to $ns1 OK after $family nat output chain flush"
return $lret
}
@@ -366,26 +381,26 @@ test_masquerade6()
local natflags=$2
local lret=0
- ip netns exec ns0 sysctl net.ipv6.conf.all.forwarding=1 > /dev/null
+ ip netns exec "$ns0" sysctl net.ipv6.conf.all.forwarding=1 > /dev/null
- ip netns exec ns2 ping -q -c 1 dead:1::99 > /dev/null # ping ns2->ns1
+ ip netns exec "$ns2" ping -q -c 1 dead:1::99 > /dev/null # ping ns2->ns1
if [ $? -ne 0 ] ; then
- echo "ERROR: cannot ping ns1 from ns2 via ipv6"
+ echo "ERROR: cannot ping $ns1 from $ns2 via ipv6"
return 1
lret=1
fi
expect="packets 1 bytes 104"
for dir in "in6" "out6" ; do
- cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect")
+ cnt=$(ip netns exec "$ns1" nft list counter inet filter ns2${dir} | grep -q "$expect")
if [ $? -ne 0 ]; then
- bad_counter ns1 ns2$dir "$expect"
+ bad_counter "$ns1" ns2$dir "$expect" "test_masquerade6 1"
lret=1
fi
- cnt=$(ip netns exec ns2 nft list counter inet filter ns1${dir} | grep -q "$expect")
+ cnt=$(ip netns exec "$ns2" nft list counter inet filter ns1${dir} | grep -q "$expect")
if [ $? -ne 0 ]; then
- bad_counter ns2 ns1$dir "$expect"
+ bad_counter "$ns2" ns1$dir "$expect" "test_masquerade6 2"
lret=1
fi
done
@@ -393,7 +408,7 @@ test_masquerade6()
reset_counters
# add masquerading rule
-ip netns exec ns0 nft -f - <<EOF
+ip netns exec "$ns0" nft -f /dev/stdin <<EOF
table $family nat {
chain postrouting {
type nat hook postrouting priority 0; policy accept;
@@ -406,24 +421,24 @@ EOF
return $ksft_skip
fi
- ip netns exec ns2 ping -q -c 1 dead:1::99 > /dev/null # ping ns2->ns1
+ ip netns exec "$ns2" ping -q -c 1 dead:1::99 > /dev/null # ping ns2->ns1
if [ $? -ne 0 ] ; then
- echo "ERROR: cannot ping ns1 from ns2 with active $family masquerade $natflags"
+ echo "ERROR: cannot ping $ns1 from $ns2 with active $family masquerade $natflags"
lret=1
fi
# ns1 should have seen packets from ns0, due to masquerade
expect="packets 1 bytes 104"
for dir in "in6" "out6" ; do
- cnt=$(ip netns exec ns1 nft list counter inet filter ns0${dir} | grep -q "$expect")
+ cnt=$(ip netns exec "$ns1" nft list counter inet filter ns0${dir} | grep -q "$expect")
if [ $? -ne 0 ]; then
- bad_counter ns1 ns0$dir "$expect"
+ bad_counter "$ns1" ns0$dir "$expect" "test_masquerade6 3"
lret=1
fi
- cnt=$(ip netns exec ns2 nft list counter inet filter ns1${dir} | grep -q "$expect")
+ cnt=$(ip netns exec "$ns2" nft list counter inet filter ns1${dir} | grep -q "$expect")
if [ $? -ne 0 ]; then
- bad_counter ns2 ns1$dir "$expect"
+ bad_counter "$ns2" ns1$dir "$expect" "test_masquerade6 4"
lret=1
fi
done
@@ -431,32 +446,32 @@ EOF
# ns1 should not have seen packets from ns2, due to masquerade
expect="packets 0 bytes 0"
for dir in "in6" "out6" ; do
- cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect")
+ cnt=$(ip netns exec "$ns1" nft list counter inet filter ns2${dir} | grep -q "$expect")
if [ $? -ne 0 ]; then
- bad_counter ns1 ns0$dir "$expect"
+ bad_counter "$ns1" ns0$dir "$expect" "test_masquerade6 5"
lret=1
fi
- cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect")
+ cnt=$(ip netns exec "$ns0" nft list counter inet filter ns1${dir} | grep -q "$expect")
if [ $? -ne 0 ]; then
- bad_counter ns2 ns1$dir "$expect"
+ bad_counter "$ns0" ns1$dir "$expect" "test_masquerade6 6"
lret=1
fi
done
- ip netns exec ns2 ping -q -c 1 dead:1::99 > /dev/null # ping ns2->ns1
+ ip netns exec "$ns2" ping -q -c 1 dead:1::99 > /dev/null # ping ns2->ns1
if [ $? -ne 0 ] ; then
- echo "ERROR: cannot ping ns1 from ns2 with active ipv6 masquerade $natflags (attempt 2)"
+ echo "ERROR: cannot ping $ns1 from $ns2 with active ipv6 masquerade $natflags (attempt 2)"
lret=1
fi
- ip netns exec ns0 nft flush chain $family nat postrouting
+ ip netns exec "$ns0" nft flush chain $family nat postrouting
if [ $? -ne 0 ]; then
echo "ERROR: Could not flush $family nat postrouting" 1>&2
lret=1
fi
- test $lret -eq 0 && echo "PASS: $family IPv6 masquerade $natflags for ns2"
+ test $lret -eq 0 && echo "PASS: $family IPv6 masquerade $natflags for $ns2"
return $lret
}
@@ -467,26 +482,26 @@ test_masquerade()
local natflags=$2
local lret=0
- ip netns exec ns0 sysctl net.ipv4.conf.veth0.forwarding=1 > /dev/null
- ip netns exec ns0 sysctl net.ipv4.conf.veth1.forwarding=1 > /dev/null
+ ip netns exec "$ns0" sysctl net.ipv4.conf.veth0.forwarding=1 > /dev/null
+ ip netns exec "$ns0" sysctl net.ipv4.conf.veth1.forwarding=1 > /dev/null
- ip netns exec ns2 ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1
+ ip netns exec "$ns2" ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1
if [ $? -ne 0 ] ; then
- echo "ERROR: cannot ping ns1 from ns2 $natflags"
+ echo "ERROR: cannot ping $ns1 from "$ns2" $natflags"
lret=1
fi
expect="packets 1 bytes 84"
for dir in "in" "out" ; do
- cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect")
+ cnt=$(ip netns exec "$ns1" nft list counter inet filter ns2${dir} | grep -q "$expect")
if [ $? -ne 0 ]; then
- bad_counter ns1 ns2$dir "$expect"
+ bad_counter "$ns1" ns2$dir "$expect" "test_masquerade 1"
lret=1
fi
- cnt=$(ip netns exec ns2 nft list counter inet filter ns1${dir} | grep -q "$expect")
+ cnt=$(ip netns exec "$ns2" nft list counter inet filter ns1${dir} | grep -q "$expect")
if [ $? -ne 0 ]; then
- bad_counter ns2 ns1$dir "$expect"
+ bad_counter "$ns2" ns1$dir "$expect" "test_masquerade 2"
lret=1
fi
done
@@ -494,7 +509,7 @@ test_masquerade()
reset_counters
# add masquerading rule
-ip netns exec ns0 nft -f - <<EOF
+ip netns exec "$ns0" nft -f /dev/stdin <<EOF
table $family nat {
chain postrouting {
type nat hook postrouting priority 0; policy accept;
@@ -507,24 +522,24 @@ EOF
return $ksft_skip
fi
- ip netns exec ns2 ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1
+ ip netns exec "$ns2" ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1
if [ $? -ne 0 ] ; then
- echo "ERROR: cannot ping ns1 from ns2 with active $family masquerade $natflags"
+ echo "ERROR: cannot ping $ns1 from $ns2 with active $family masquerade $natflags"
lret=1
fi
# ns1 should have seen packets from ns0, due to masquerade
expect="packets 1 bytes 84"
for dir in "in" "out" ; do
- cnt=$(ip netns exec ns1 nft list counter inet filter ns0${dir} | grep -q "$expect")
+ cnt=$(ip netns exec "$ns1" nft list counter inet filter ns0${dir} | grep -q "$expect")
if [ $? -ne 0 ]; then
- bad_counter ns1 ns0$dir "$expect"
+ bad_counter "$ns1" ns0$dir "$expect" "test_masquerade 3"
lret=1
fi
- cnt=$(ip netns exec ns2 nft list counter inet filter ns1${dir} | grep -q "$expect")
+ cnt=$(ip netns exec "$ns2" nft list counter inet filter ns1${dir} | grep -q "$expect")
if [ $? -ne 0 ]; then
- bad_counter ns2 ns1$dir "$expect"
+ bad_counter "$ns2" ns1$dir "$expect" "test_masquerade 4"
lret=1
fi
done
@@ -532,32 +547,32 @@ EOF
# ns1 should not have seen packets from ns2, due to masquerade
expect="packets 0 bytes 0"
for dir in "in" "out" ; do
- cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect")
+ cnt=$(ip netns exec "$ns1" nft list counter inet filter ns2${dir} | grep -q "$expect")
if [ $? -ne 0 ]; then
- bad_counter ns1 ns0$dir "$expect"
+ bad_counter "$ns1" ns0$dir "$expect" "test_masquerade 5"
lret=1
fi
- cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect")
+ cnt=$(ip netns exec "$ns0" nft list counter inet filter ns1${dir} | grep -q "$expect")
if [ $? -ne 0 ]; then
- bad_counter ns2 ns1$dir "$expect"
+ bad_counter "$ns0" ns1$dir "$expect" "test_masquerade 6"
lret=1
fi
done
- ip netns exec ns2 ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1
+ ip netns exec "$ns2" ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1
if [ $? -ne 0 ] ; then
- echo "ERROR: cannot ping ns1 from ns2 with active ip masquerade $natflags (attempt 2)"
+ echo "ERROR: cannot ping $ns1 from $ns2 with active ip masquerade $natflags (attempt 2)"
lret=1
fi
- ip netns exec ns0 nft flush chain $family nat postrouting
+ ip netns exec "$ns0" nft flush chain $family nat postrouting
if [ $? -ne 0 ]; then
echo "ERROR: Could not flush $family nat postrouting" 1>&2
lret=1
fi
- test $lret -eq 0 && echo "PASS: $family IP masquerade $natflags for ns2"
+ test $lret -eq 0 && echo "PASS: $family IP masquerade $natflags for $ns2"
return $lret
}
@@ -567,25 +582,25 @@ test_redirect6()
local family=$1
local lret=0
- ip netns exec ns0 sysctl net.ipv6.conf.all.forwarding=1 > /dev/null
+ ip netns exec "$ns0" sysctl net.ipv6.conf.all.forwarding=1 > /dev/null
- ip netns exec ns2 ping -q -c 1 dead:1::99 > /dev/null # ping ns2->ns1
+ ip netns exec "$ns2" ping -q -c 1 dead:1::99 > /dev/null # ping ns2->ns1
if [ $? -ne 0 ] ; then
- echo "ERROR: cannnot ping ns1 from ns2 via ipv6"
+ echo "ERROR: cannnot ping $ns1 from $ns2 via ipv6"
lret=1
fi
expect="packets 1 bytes 104"
for dir in "in6" "out6" ; do
- cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect")
+ cnt=$(ip netns exec "$ns1" nft list counter inet filter ns2${dir} | grep -q "$expect")
if [ $? -ne 0 ]; then
- bad_counter ns1 ns2$dir "$expect"
+ bad_counter "$ns1" ns2$dir "$expect" "test_redirect6 1"
lret=1
fi
- cnt=$(ip netns exec ns2 nft list counter inet filter ns1${dir} | grep -q "$expect")
+ cnt=$(ip netns exec "$ns2" nft list counter inet filter ns1${dir} | grep -q "$expect")
if [ $? -ne 0 ]; then
- bad_counter ns2 ns1$dir "$expect"
+ bad_counter "$ns2" ns1$dir "$expect" "test_redirect6 2"
lret=1
fi
done
@@ -593,7 +608,7 @@ test_redirect6()
reset_counters
# add redirect rule
-ip netns exec ns0 nft -f - <<EOF
+ip netns exec "$ns0" nft -f /dev/stdin <<EOF
table $family nat {
chain prerouting {
type nat hook prerouting priority 0; policy accept;
@@ -606,18 +621,18 @@ EOF
return $ksft_skip
fi
- ip netns exec ns2 ping -q -c 1 dead:1::99 > /dev/null # ping ns2->ns1
+ ip netns exec "$ns2" ping -q -c 1 dead:1::99 > /dev/null # ping ns2->ns1
if [ $? -ne 0 ] ; then
- echo "ERROR: cannot ping ns1 from ns2 via ipv6 with active $family redirect"
+ echo "ERROR: cannot ping $ns1 from $ns2 via ipv6 with active $family redirect"
lret=1
fi
# ns1 should have seen no packets from ns2, due to redirection
expect="packets 0 bytes 0"
for dir in "in6" "out6" ; do
- cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect")
+ cnt=$(ip netns exec "$ns1" nft list counter inet filter ns2${dir} | grep -q "$expect")
if [ $? -ne 0 ]; then
- bad_counter ns1 ns0$dir "$expect"
+ bad_counter "$ns1" ns0$dir "$expect" "test_redirect6 3"
lret=1
fi
done
@@ -625,20 +640,20 @@ EOF
# ns0 should have seen packets from ns2, due to masquerade
expect="packets 1 bytes 104"
for dir in "in6" "out6" ; do
- cnt=$(ip netns exec ns0 nft list counter inet filter ns2${dir} | grep -q "$expect")
+ cnt=$(ip netns exec "$ns0" nft list counter inet filter ns2${dir} | grep -q "$expect")
if [ $? -ne 0 ]; then
- bad_counter ns1 ns0$dir "$expect"
+ bad_counter "$ns1" ns0$dir "$expect" "test_redirect6 4"
lret=1
fi
done
- ip netns exec ns0 nft delete table $family nat
+ ip netns exec "$ns0" nft delete table $family nat
if [ $? -ne 0 ]; then
echo "ERROR: Could not delete $family nat table" 1>&2
lret=1
fi
- test $lret -eq 0 && echo "PASS: $family IPv6 redirection for ns2"
+ test $lret -eq 0 && echo "PASS: $family IPv6 redirection for $ns2"
return $lret
}
@@ -648,26 +663,26 @@ test_redirect()
local family=$1
local lret=0
- ip netns exec ns0 sysctl net.ipv4.conf.veth0.forwarding=1 > /dev/null
- ip netns exec ns0 sysctl net.ipv4.conf.veth1.forwarding=1 > /dev/null
+ ip netns exec "$ns0" sysctl net.ipv4.conf.veth0.forwarding=1 > /dev/null
+ ip netns exec "$ns0" sysctl net.ipv4.conf.veth1.forwarding=1 > /dev/null
- ip netns exec ns2 ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1
+ ip netns exec "$ns2" ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1
if [ $? -ne 0 ] ; then
- echo "ERROR: cannot ping ns1 from ns2"
+ echo "ERROR: cannot ping $ns1 from $ns2"
lret=1
fi
expect="packets 1 bytes 84"
for dir in "in" "out" ; do
- cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect")
+ cnt=$(ip netns exec "$ns1" nft list counter inet filter ns2${dir} | grep -q "$expect")
if [ $? -ne 0 ]; then
- bad_counter ns1 ns2$dir "$expect"
+ bad_counter "$ns1" $ns2$dir "$expect" "test_redirect 1"
lret=1
fi
- cnt=$(ip netns exec ns2 nft list counter inet filter ns1${dir} | grep -q "$expect")
+ cnt=$(ip netns exec "$ns2" nft list counter inet filter ns1${dir} | grep -q "$expect")
if [ $? -ne 0 ]; then
- bad_counter ns2 ns1$dir "$expect"
+ bad_counter "$ns2" ns1$dir "$expect" "test_redirect 2"
lret=1
fi
done
@@ -675,7 +690,7 @@ test_redirect()
reset_counters
# add redirect rule
-ip netns exec ns0 nft -f - <<EOF
+ip netns exec "$ns0" nft -f /dev/stdin <<EOF
table $family nat {
chain prerouting {
type nat hook prerouting priority 0; policy accept;
@@ -688,9 +703,9 @@ EOF
return $ksft_skip
fi
- ip netns exec ns2 ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1
+ ip netns exec "$ns2" ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1
if [ $? -ne 0 ] ; then
- echo "ERROR: cannot ping ns1 from ns2 with active $family ip redirect"
+ echo "ERROR: cannot ping $ns1 from $ns2 with active $family ip redirect"
lret=1
fi
@@ -698,9 +713,9 @@ EOF
expect="packets 0 bytes 0"
for dir in "in" "out" ; do
- cnt=$(ip netns exec ns1 nft list counter inet filter ns2${dir} | grep -q "$expect")
+ cnt=$(ip netns exec "$ns1" nft list counter inet filter ns2${dir} | grep -q "$expect")
if [ $? -ne 0 ]; then
- bad_counter ns1 ns0$dir "$expect"
+ bad_counter "$ns1" ns0$dir "$expect" "test_redirect 3"
lret=1
fi
done
@@ -708,28 +723,28 @@ EOF
# ns0 should have seen packets from ns2, due to masquerade
expect="packets 1 bytes 84"
for dir in "in" "out" ; do
- cnt=$(ip netns exec ns0 nft list counter inet filter ns2${dir} | grep -q "$expect")
+ cnt=$(ip netns exec "$ns0" nft list counter inet filter ns2${dir} | grep -q "$expect")
if [ $? -ne 0 ]; then
- bad_counter ns1 ns0$dir "$expect"
+ bad_counter "$ns0" ns0$dir "$expect" "test_redirect 4"
lret=1
fi
done
- ip netns exec ns0 nft delete table $family nat
+ ip netns exec "$ns0" nft delete table $family nat
if [ $? -ne 0 ]; then
echo "ERROR: Could not delete $family nat table" 1>&2
lret=1
fi
- test $lret -eq 0 && echo "PASS: $family IP redirection for ns2"
+ test $lret -eq 0 && echo "PASS: $family IP redirection for $ns2"
return $lret
}
-# ip netns exec ns0 ping -c 1 -q 10.0.$i.99
+# ip netns exec "$ns0" ping -c 1 -q 10.0.$i.99
for i in 0 1 2; do
-ip netns exec ns$i nft -f - <<EOF
+ip netns exec ns$i-$sfx nft -f /dev/stdin <<EOF
table inet filter {
counter ns0in {}
counter ns1in {}
@@ -796,18 +811,18 @@ done
sleep 3
# test basic connectivity
for i in 1 2; do
- ip netns exec ns0 ping -c 1 -q 10.0.$i.99 > /dev/null
+ ip netns exec "$ns0" ping -c 1 -q 10.0.$i.99 > /dev/null
if [ $? -ne 0 ];then
echo "ERROR: Could not reach other namespace(s)" 1>&2
ret=1
fi
- ip netns exec ns0 ping -c 1 -q dead:$i::99 > /dev/null
+ ip netns exec "$ns0" ping -c 1 -q dead:$i::99 > /dev/null
if [ $? -ne 0 ];then
echo "ERROR: Could not reach other namespace(s) via ipv6" 1>&2
ret=1
fi
- check_counters ns$i
+ check_counters ns$i-$sfx
if [ $? -ne 0 ]; then
ret=1
fi
@@ -820,7 +835,7 @@ for i in 1 2; do
done
if [ $ret -eq 0 ];then
- echo "PASS: netns routing/connectivity: ns0 can reach ns1 and ns2"
+ echo "PASS: netns routing/connectivity: $ns0 can reach $ns1 and $ns2"
fi
reset_counters
@@ -846,4 +861,9 @@ reset_counters
$test_inet_nat && test_redirect inet
$test_inet_nat && test_redirect6 inet
+if [ $ret -ne 0 ];then
+ echo -n "FAIL: "
+ nft --version
+fi
+
exit $ret
--
2.20.1
next prev parent reply other threads:[~2019-12-27 17:58 UTC|newest]
Thread overview: 142+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-27 17:37 [PATCH AUTOSEL 5.4 001/187] ASoC: rt5682: fix i2c arbitration lost issue Sasha Levin
2019-12-27 17:37 ` [PATCH AUTOSEL 5.4 002/187] spi: pxa2xx: Add support for Intel Jasper Lake Sasha Levin
2019-12-27 17:37 ` [PATCH AUTOSEL 5.4 003/187] regulator: fix use after free issue Sasha Levin
2019-12-27 17:37 ` [PATCH AUTOSEL 5.4 004/187] spi: cadence: Correct handling of native chipselect Sasha Levin
2019-12-27 17:37 ` [PATCH AUTOSEL 5.4 005/187] ASoC: max98090: remove msleep in PLL unlocked workaround Sasha Levin
2019-12-27 22:43 ` Mark Brown
2019-12-27 17:37 ` [PATCH AUTOSEL 5.4 006/187] ASoC: max98090: exit workaround earlier if PLL is locked Sasha Levin
2019-12-27 22:44 ` Mark Brown
2020-01-05 15:30 ` Sasha Levin
2019-12-27 17:37 ` [PATCH AUTOSEL 5.4 007/187] ASoC: max98090: fix possible race conditions Sasha Levin
2019-12-27 17:37 ` [PATCH AUTOSEL 5.4 008/187] mwifiex: fix possible heap overflow in mwifiex_process_country_ie() Sasha Levin
2020-01-06 22:51 ` Brian Norris
2020-01-09 15:29 ` Sasha Levin
2020-01-09 17:33 ` Brian Norris
2019-12-27 17:37 ` [PATCH AUTOSEL 5.4 009/187] spi: dw: Correct handling of native chipselect Sasha Levin
2019-12-27 17:37 ` [PATCH AUTOSEL 5.4 010/187] spi: fsl: Fix GPIO descriptor support Sasha Levin
2019-12-27 17:37 ` [PATCH AUTOSEL 5.4 011/187] gpio: Handle counting of Freescale chipselects Sasha Levin
2019-12-27 17:38 ` [PATCH AUTOSEL 5.4 012/187] spi: fsl: Handle the single hardwired chipselect case Sasha Levin
2019-12-27 17:38 ` [PATCH AUTOSEL 5.4 013/187] locking/spinlock/debug: Fix various data races Sasha Levin
2019-12-27 17:38 ` [PATCH AUTOSEL 5.4 014/187] netfilter: ctnetlink: netns exit must wait for callbacks Sasha Levin
2019-12-27 17:38 ` [PATCH AUTOSEL 5.4 015/187] x86/intel: Disable HPET on Intel Coffee Lake H platforms Sasha Levin
2019-12-27 17:38 ` [PATCH AUTOSEL 5.4 016/187] x86/intel: Disable HPET on Intel Ice Lake platforms Sasha Levin
2020-01-30 19:50 ` Len Brown
2019-12-27 17:38 ` [PATCH AUTOSEL 5.4 017/187] netfilter: nf_tables_offload: Check for the NETDEV_UNREGISTER event Sasha Levin
2019-12-27 17:38 ` [PATCH AUTOSEL 5.4 018/187] mwifiex: Fix heap overflow in mmwifiex_process_tdls_action_frame() Sasha Levin
2019-12-27 17:38 ` [PATCH AUTOSEL 5.4 019/187] libtraceevent: Fix lib installation with O= Sasha Levin
2019-12-27 17:38 ` [PATCH AUTOSEL 5.4 020/187] libtraceevent: Copy pkg-config file to output folder when using O= Sasha Levin
2019-12-27 17:38 ` [PATCH AUTOSEL 5.4 021/187] regulator: core: fix regulator_register() error paths to properly release rdev Sasha Levin
2019-12-27 17:38 ` [PATCH AUTOSEL 5.4 022/187] x86/efi: Update e820 with reserved EFI boot services data to fix kexec breakage Sasha Levin
2019-12-27 17:38 ` [PATCH AUTOSEL 5.4 023/187] ASoC: Intel: bytcr_rt5640: Update quirk for Teclast X89 Sasha Levin
2019-12-27 17:38 ` Sasha Levin [this message]
2019-12-27 17:38 ` [PATCH AUTOSEL 5.4 025/187] netfilter: nf_queue: enqueue skbs with NULL dst Sasha Levin
2019-12-27 17:38 ` [PATCH AUTOSEL 5.4 026/187] efi/gop: Return EFI_NOT_FOUND if there are no usable GOPs Sasha Levin
2019-12-27 17:38 ` [PATCH AUTOSEL 5.4 027/187] efi/gop: Return EFI_SUCCESS if a usable GOP was found Sasha Levin
2019-12-27 17:38 ` [PATCH AUTOSEL 5.4 028/187] efi/gop: Fix memory leak in __gop_query32/64() Sasha Levin
2019-12-27 17:38 ` [PATCH AUTOSEL 5.4 029/187] efi/earlycon: Remap entire framebuffer after page initialization Sasha Levin
2019-12-27 17:38 ` [PATCH AUTOSEL 5.4 030/187] ARM: dts: imx6ul: imx6ul-14x14-evk.dtsi: Fix SPI NOR probing Sasha Levin
2019-12-27 17:38 ` [PATCH AUTOSEL 5.4 031/187] ARM: vexpress: Set-up shared OPP table instead of individual for each CPU Sasha Levin
2019-12-27 17:38 ` [PATCH AUTOSEL 5.4 032/187] netfilter: uapi: Avoid undefined left-shift in xt_sctp.h Sasha Levin
2019-12-27 17:38 ` [PATCH AUTOSEL 5.4 033/187] netfilter: nft_set_rbtree: bogus lookup/get on consecutive elements in named sets Sasha Levin
2019-12-27 17:38 ` [PATCH AUTOSEL 5.4 034/187] netfilter: nf_tables: validate NFT_SET_ELEM_INTERVAL_END Sasha Levin
2019-12-27 17:38 ` [PATCH AUTOSEL 5.4 035/187] netfilter: nf_tables: validate NFT_DATA_VALUE after nft_data_init() Sasha Levin
2019-12-27 17:38 ` [PATCH AUTOSEL 5.4 036/187] netfilter: nf_tables: skip module reference count bump on object updates Sasha Levin
2019-12-27 17:38 ` [PATCH AUTOSEL 5.4 037/187] netfilter: nf_tables_offload: return EOPNOTSUPP if rule specifies no actions Sasha Levin
2019-12-27 17:38 ` [PATCH AUTOSEL 5.4 038/187] netfilter: bridge: make sure to pull arp header in br_nf_forward_arp() Sasha Levin
2019-12-27 17:38 ` [PATCH AUTOSEL 5.4 039/187] ARM: dts: BCM5301X: Fix MDIO node address/size cells Sasha Levin
2019-12-27 17:38 ` [PATCH AUTOSEL 5.4 040/187] selftests/ftrace: Fix to check the existence of set_ftrace_filter Sasha Levin
2019-12-27 17:38 ` [PATCH AUTOSEL 5.4 041/187] selftests/ftrace: Fix ftrace test cases to check unsupported Sasha Levin
2019-12-27 17:38 ` [PATCH AUTOSEL 5.4 042/187] selftests/ftrace: Do not to use absolute debugfs path Sasha Levin
2019-12-27 17:38 ` [PATCH AUTOSEL 5.4 043/187] selftests/ftrace: Fix multiple kprobe testcase Sasha Levin
2019-12-27 17:38 ` [PATCH AUTOSEL 5.4 044/187] selftests: safesetid: Move link library to LDLIBS Sasha Levin
2019-12-27 17:38 ` [PATCH AUTOSEL 5.4 045/187] selftests: safesetid: Check the return value of setuid/setgid Sasha Levin
2019-12-27 17:38 ` [PATCH AUTOSEL 5.4 046/187] selftests: safesetid: Fix Makefile to set correct test program Sasha Levin
2019-12-27 17:38 ` [PATCH AUTOSEL 5.4 047/187] ARM: exynos_defconfig: Restore debugfs support Sasha Levin
2019-12-27 17:38 ` [PATCH AUTOSEL 5.4 048/187] ARM: dts: Cygnus: Fix MDIO node address/size cells Sasha Levin
2019-12-27 17:38 ` [PATCH AUTOSEL 5.4 049/187] mlxsw: spectrum_router: Remove unlikely user-triggerable warning Sasha Levin
2019-12-27 17:38 ` [PATCH AUTOSEL 5.4 050/187] selftests: forwarding: Delete IPv6 address at the end Sasha Levin
2019-12-27 17:38 ` [PATCH AUTOSEL 5.4 051/187] spi: spi-cavium-thunderx: Add missing pci_release_regions() Sasha Levin
2019-12-27 17:38 ` [PATCH AUTOSEL 5.4 052/187] net: ethernet: ti: davinci_cpdma: fix warning "device driver frees DMA memory with different size" Sasha Levin
2019-12-27 17:38 ` [PATCH AUTOSEL 5.4 053/187] af_packet: set defaule value for tmo Sasha Levin
2019-12-27 17:38 ` [PATCH AUTOSEL 5.4 054/187] fjes: fix missed check in fjes_acpi_add Sasha Levin
2019-12-27 17:38 ` [PATCH AUTOSEL 5.4 055/187] NFC: nxp-nci: Fix probing without ACPI Sasha Levin
2019-12-27 17:38 ` [PATCH AUTOSEL 5.4 056/187] Revert "iwlwifi: assign directly to iwl_trans->cfg in QuZ detection" Sasha Levin
2019-12-30 5:48 ` Anders Kaseorg
2020-01-05 15:42 ` Sasha Levin
2019-12-27 17:38 ` [PATCH AUTOSEL 5.4 057/187] iwlwifi: pcie: move power gating workaround earlier in the flow Sasha Levin
2019-12-27 17:38 ` [PATCH AUTOSEL 5.4 058/187] reset: Do not register resource data for missing resets Sasha Levin
2019-12-27 17:38 ` [PATCH AUTOSEL 5.4 059/187] efi: Don't attempt to map RCI2 config table if it doesn't exist Sasha Levin
2019-12-27 17:38 ` [PATCH AUTOSEL 5.4 060/187] ASoC: topology: Check return value for snd_soc_add_dai_link() Sasha Levin
2019-12-27 17:38 ` [PATCH AUTOSEL 5.4 061/187] ASoC: topology: Check return value for soc_tplg_pcm_create() Sasha Levin
2019-12-27 17:38 ` [PATCH AUTOSEL 5.4 062/187] ASoC: SOF: loader: snd_sof_fw_parse_ext_data log warning on unknown header Sasha Levin
2019-12-27 17:38 ` [PATCH AUTOSEL 5.4 063/187] ASoC: SOF: Intel: split cht and byt debug window sizes Sasha Levin
2019-12-27 17:38 ` [PATCH AUTOSEL 5.4 064/187] ARM: dts: am335x-sancloud-bbe: fix phy mode Sasha Levin
2019-12-27 17:38 ` [PATCH AUTOSEL 5.4 065/187] ARM: omap2plus_defconfig: Add back DEBUG_FS Sasha Levin
2019-12-27 17:38 ` [PATCH AUTOSEL 5.4 066/187] ARM: dts: bcm283x: Fix critical trip point Sasha Levin
2019-12-27 17:38 ` [PATCH AUTOSEL 5.4 067/187] bnxt_en: Fix MSIX request logic for RDMA driver Sasha Levin
2019-12-27 17:38 ` [PATCH AUTOSEL 5.4 068/187] bnxt_en: Return error if FW returns more data than dump length Sasha Levin
2019-12-27 17:38 ` [PATCH AUTOSEL 5.4 069/187] net: ena: fix napi handler misbehavior when the napi budget is zero Sasha Levin
2019-12-27 17:38 ` [PATCH AUTOSEL 5.4 070/187] arm64: dts: ls1028a: fix typo in TMU calibration data Sasha Levin
2019-12-27 17:38 ` [PATCH AUTOSEL 5.4 071/187] bpf, riscv: Limit to 33 tail calls Sasha Levin
2019-12-27 17:39 ` [PATCH AUTOSEL 5.4 072/187] bpf, mips: " Sasha Levin
2019-12-27 17:39 ` [PATCH AUTOSEL 5.4 073/187] bpftool: Don't crash on missing jited insns or ksyms Sasha Levin
2019-12-27 17:39 ` [PATCH AUTOSEL 5.4 074/187] perf metricgroup: Fix printing event names of metric group with multiple events Sasha Levin
2019-12-27 17:39 ` [PATCH AUTOSEL 5.4 075/187] perf header: Fix false warning when there are no duplicate cache entries Sasha Levin
2019-12-27 17:39 ` [PATCH AUTOSEL 5.4 076/187] spi: spi-ti-qspi: Fix a bug when accessing non default CS Sasha Levin
2019-12-27 17:39 ` [PATCH AUTOSEL 5.4 077/187] ARM: dts: am437x-gp/epos-evm: fix panel compatible Sasha Levin
2019-12-27 17:39 ` [PATCH AUTOSEL 5.4 078/187] kselftest/runner: Print new line in print of timeout log Sasha Levin
2019-12-27 17:39 ` [PATCH AUTOSEL 5.4 079/187] kselftest: Support old perl versions Sasha Levin
2019-12-27 17:39 ` [PATCH AUTOSEL 5.4 080/187] samples: bpf: Replace symbol compare of trace_event Sasha Levin
2019-12-27 17:39 ` [PATCH AUTOSEL 5.4 081/187] samples: bpf: fix syscall_tp due to unused syscall Sasha Levin
2019-12-27 17:39 ` [PATCH AUTOSEL 5.4 082/187] arm64: dts: ls1028a: fix reboot node Sasha Levin
2019-12-27 17:39 ` [PATCH AUTOSEL 5.4 083/187] ARM: imx_v6_v7_defconfig: Explicitly restore CONFIG_DEBUG_FS Sasha Levin
2019-12-27 17:39 ` [PATCH AUTOSEL 5.4 084/187] tty: serial: msm_serial: Fix lockup for sysrq and oops Sasha Levin
2019-12-27 17:39 ` [PATCH AUTOSEL 5.4 085/187] pinctrl: aspeed-g6: Fix LPC/eSPI mux configuration Sasha Levin
2019-12-27 17:39 ` [PATCH AUTOSEL 5.4 086/187] bus: ti-sysc: Fix missing reset delay handling Sasha Levin
2019-12-27 17:39 ` [PATCH AUTOSEL 5.4 087/187] net: usb: lan78xx: Fix suspend/resume PHY register access error Sasha Levin
2019-12-27 17:39 ` [PATCH AUTOSEL 5.4 088/187] qede: Fix multicast mac configuration Sasha Levin
2019-12-27 17:39 ` [PATCH AUTOSEL 5.4 089/187] clk: walk orphan list on clock provider registration Sasha Levin
2019-12-27 17:39 ` [PATCH AUTOSEL 5.4 090/187] mac80211: fix TID field in monitor mode transmit Sasha Levin
2019-12-27 17:39 ` [PATCH AUTOSEL 5.4 091/187] cfg80211: fix double-free after changing network namespace Sasha Levin
2019-12-27 17:39 ` [PATCH AUTOSEL 5.4 092/187] pinctrl: pinmux: fix a possible null pointer in pinmux_can_be_used_for_gpio Sasha Levin
2019-12-27 17:39 ` [PATCH AUTOSEL 5.4 093/187] powerpc: Ensure that swiotlb buffer is allocated from low memory Sasha Levin
2019-12-27 17:39 ` [PATCH AUTOSEL 5.4 094/187] btrfs: Fix error messages in qgroup_rescan_init Sasha Levin
2019-12-27 17:39 ` [PATCH AUTOSEL 5.4 095/187] Btrfs: fix cloning range with a hole when using the NO_HOLES feature Sasha Levin
2019-12-27 17:39 ` [PATCH AUTOSEL 5.4 096/187] ARM: shmobile: defconfig: Restore debugfs support Sasha Levin
2020-01-09 22:12 ` Geert Uytterhoeven
2019-12-27 17:39 ` [PATCH AUTOSEL 5.4 097/187] btrfs: handle error in btrfs_cache_block_group Sasha Levin
2019-12-27 17:39 ` [PATCH AUTOSEL 5.4 098/187] Btrfs: fix hole extent items with a zero size after range cloning Sasha Levin
2019-12-27 17:39 ` [PATCH AUTOSEL 5.4 099/187] ocxl: Fix potential memory leak on context creation Sasha Levin
2019-12-27 17:39 ` [PATCH AUTOSEL 5.4 100/187] bpf: Clear skb->tstamp in bpf_redirect when necessary Sasha Levin
2019-12-27 17:39 ` [PATCH AUTOSEL 5.4 101/187] bnxt: apply computed clamp value for coalece parameter Sasha Levin
2019-12-27 17:39 ` [PATCH AUTOSEL 5.4 102/187] ipv6/addrconf: only check invalid header values when NETLINK_F_STRICT_CHK is set Sasha Levin
2019-12-27 17:39 ` [PATCH AUTOSEL 5.4 103/187] tcp/dccp: fix possible race __inet_lookup_established() Sasha Levin
2019-12-27 17:39 ` [PATCH AUTOSEL 5.4 104/187] 6pack,mkiss: fix possible deadlock Sasha Levin
2019-12-27 17:39 ` [PATCH AUTOSEL 5.4 105/187] habanalabs: rate limit error msg on waiting for CS Sasha Levin
2019-12-27 17:39 ` [PATCH AUTOSEL 5.4 106/187] habanalabs: remove variable 'val' set but not used Sasha Levin
2019-12-27 17:39 ` [PATCH AUTOSEL 5.4 107/187] net: marvell: mvpp2: phylink requires the link interrupt Sasha Levin
2019-12-27 17:39 ` [PATCH AUTOSEL 5.4 108/187] hv_netvsc: Fix tx_table init in rndis_set_subchannel() Sasha Levin
2019-12-27 17:39 ` [PATCH AUTOSEL 5.4 109/187] bnx2x: Do not handle requests from VFs after parity Sasha Levin
2019-12-27 17:39 ` [PATCH AUTOSEL 5.4 110/187] bnx2x: Fix logic to get total no. of PFs per engine Sasha Levin
2019-12-27 17:39 ` [PATCH AUTOSEL 5.4 111/187] bonding: fix active-backup transition after link failure Sasha Levin
2019-12-27 17:39 ` [PATCH AUTOSEL 5.4 112/187] gtp: do not allow adding duplicate tid and ms_addr pdp context Sasha Levin
2019-12-27 17:39 ` [PATCH AUTOSEL 5.4 113/187] gtp: fix wrong condition in gtp_genl_dump_pdp() Sasha Levin
2019-12-27 17:39 ` [PATCH AUTOSEL 5.4 114/187] gtp: fix an use-after-free in ipv4_pdp_find() Sasha Levin
2019-12-27 17:39 ` [PATCH AUTOSEL 5.4 115/187] gtp: avoid zero size hashtable Sasha Levin
2019-12-27 17:39 ` [PATCH AUTOSEL 5.4 116/187] net: phylink: fix interface passed to mac_link_up Sasha Levin
2019-12-27 17:39 ` [PATCH AUTOSEL 5.4 117/187] net/smc: add fallback check to connect() Sasha Levin
2019-12-27 17:39 ` [PATCH AUTOSEL 5.4 118/187] cxgb4: Fix kernel panic while accessing sge_info Sasha Levin
2019-12-27 17:39 ` [PATCH AUTOSEL 5.4 119/187] net: usb: lan78xx: Fix error message format specifier Sasha Levin
2019-12-27 17:39 ` [PATCH AUTOSEL 5.4 120/187] parisc: fix compilation when KEXEC=n and KEXEC_FILE=y Sasha Levin
2019-12-27 17:39 ` [PATCH AUTOSEL 5.4 121/187] parisc: add missing __init annotation Sasha Levin
2019-12-27 17:39 ` [PATCH AUTOSEL 5.4 122/187] rfkill: Fix incorrect check to avoid NULL pointer dereference Sasha Levin
2019-12-27 17:39 ` [PATCH AUTOSEL 5.4 123/187] ASoC: wm8962: fix lambda value Sasha Levin
2019-12-27 17:39 ` [PATCH AUTOSEL 5.4 124/187] regulator: rn5t618: fix module aliases Sasha Levin
2019-12-27 17:39 ` [PATCH AUTOSEL 5.4 125/187] spi: nxp-fspi: Ensure width is respected in spi-mem operations Sasha Levin
2019-12-27 17:39 ` [PATCH AUTOSEL 5.4 126/187] powerpc: Fix __clear_user() with KUAP enabled Sasha Levin
2019-12-27 17:39 ` [PATCH AUTOSEL 5.4 127/187] clk: at91: fix possible deadlock Sasha Levin
2019-12-27 17:39 ` [PATCH AUTOSEL 5.4 128/187] net: dsa: b53: Fix egress flooding settings Sasha Levin
2019-12-27 17:39 ` [PATCH AUTOSEL 5.4 129/187] net: gemini: Fix memory leak in gmac_setup_txqs Sasha Levin
2019-12-27 17:39 ` [PATCH AUTOSEL 5.4 130/187] staging: axis-fifo: add unspecified HAS_IOMEM dependency Sasha Levin
2019-12-27 17:39 ` [PATCH AUTOSEL 5.4 131/187] iommu/iova: Init the struct iova to fix the possible memleak Sasha Levin
2019-12-27 17:40 ` [PATCH AUTOSEL 5.4 132/187] kconfig: don't crash on NULL expressions in expr_eq() Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191227174055.4923-24-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=fw@strlen.de \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-kselftest@vger.kernel.org \
--cc=pablo@netfilter.org \
--cc=phil@nwl.cc \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).