stable.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Marek Vasut <marex@denx.de>,
	"David S . Miller" <davem@davemloft.net>,
	Lukas Wunner <lukas@wunner.de>, Petr Stetiar <ynezz@true.cz>,
	YueHaibing <yuehaibing@huawei.com>,
	Sasha Levin <sashal@kernel.org>,
	netdev@vger.kernel.org
Subject: [PATCH AUTOSEL 4.9 08/12] net: ks8851-ml: Fix IRQ handling and locking
Date: Thu,  5 Mar 2020 12:15:55 -0500	[thread overview]
Message-ID: <20200305171559.30422-8-sashal@kernel.org> (raw)
In-Reply-To: <20200305171559.30422-1-sashal@kernel.org>

From: Marek Vasut <marex@denx.de>

[ Upstream commit 44343418d0f2f623cb9da6f5000df793131cbe3b ]

The KS8851 requires that packet RX and TX are mutually exclusive.
Currently, the driver hopes to achieve this by disabling interrupt
from the card by writing the card registers and by disabling the
interrupt on the interrupt controller. This however is racy on SMP.

Replace this approach by expanding the spinlock used around the
ks_start_xmit() TX path to ks_irq() RX path to assure true mutual
exclusion and remove the interrupt enabling/disabling, which is
now not needed anymore. Furthermore, disable interrupts also in
ks_net_stop(), which was missing before.

Note that a massive improvement here would be to re-use the KS8851
driver approach, which is to move the TX path into a worker thread,
interrupt handling to threaded interrupt, and synchronize everything
with mutexes, but that would be a much bigger rework, for a separate
patch.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: David S. Miller <davem@davemloft.net>
Cc: Lukas Wunner <lukas@wunner.de>
Cc: Petr Stetiar <ynezz@true.cz>
Cc: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/micrel/ks8851_mll.c | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/micrel/ks8851_mll.c b/drivers/net/ethernet/micrel/ks8851_mll.c
index 8dc1f0277117d..cc44143f86a5e 100644
--- a/drivers/net/ethernet/micrel/ks8851_mll.c
+++ b/drivers/net/ethernet/micrel/ks8851_mll.c
@@ -866,14 +866,17 @@ static irqreturn_t ks_irq(int irq, void *pw)
 {
 	struct net_device *netdev = pw;
 	struct ks_net *ks = netdev_priv(netdev);
+	unsigned long flags;
 	u16 status;
 
+	spin_lock_irqsave(&ks->statelock, flags);
 	/*this should be the first in IRQ handler */
 	ks_save_cmd_reg(ks);
 
 	status = ks_rdreg16(ks, KS_ISR);
 	if (unlikely(!status)) {
 		ks_restore_cmd_reg(ks);
+		spin_unlock_irqrestore(&ks->statelock, flags);
 		return IRQ_NONE;
 	}
 
@@ -899,6 +902,7 @@ static irqreturn_t ks_irq(int irq, void *pw)
 		ks->netdev->stats.rx_over_errors++;
 	/* this should be the last in IRQ handler*/
 	ks_restore_cmd_reg(ks);
+	spin_unlock_irqrestore(&ks->statelock, flags);
 	return IRQ_HANDLED;
 }
 
@@ -968,6 +972,7 @@ static int ks_net_stop(struct net_device *netdev)
 
 	/* shutdown RX/TX QMU */
 	ks_disable_qmu(ks);
+	ks_disable_int(ks);
 
 	/* set powermode to soft power down to save power */
 	ks_set_powermode(ks, PMECR_PM_SOFTDOWN);
@@ -1024,10 +1029,9 @@ static netdev_tx_t ks_start_xmit(struct sk_buff *skb, struct net_device *netdev)
 {
 	netdev_tx_t retv = NETDEV_TX_OK;
 	struct ks_net *ks = netdev_priv(netdev);
+	unsigned long flags;
 
-	disable_irq(netdev->irq);
-	ks_disable_int(ks);
-	spin_lock(&ks->statelock);
+	spin_lock_irqsave(&ks->statelock, flags);
 
 	/* Extra space are required:
 	*  4 byte for alignment, 4 for status/length, 4 for CRC
@@ -1041,9 +1045,7 @@ static netdev_tx_t ks_start_xmit(struct sk_buff *skb, struct net_device *netdev)
 		dev_kfree_skb(skb);
 	} else
 		retv = NETDEV_TX_BUSY;
-	spin_unlock(&ks->statelock);
-	ks_enable_int(ks);
-	enable_irq(netdev->irq);
+	spin_unlock_irqrestore(&ks->statelock, flags);
 	return retv;
 }
 
-- 
2.20.1


  parent reply	other threads:[~2020-03-05 17:16 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-05 17:15 [PATCH AUTOSEL 4.9 01/12] ACPI: watchdog: Allow disabling WDAT at boot Sasha Levin
2020-03-05 17:15 ` [PATCH AUTOSEL 4.9 02/12] HID: apple: Add support for recent firmware on Magic Keyboards Sasha Levin
2020-03-05 17:15 ` [PATCH AUTOSEL 4.9 03/12] HID: core: fix off-by-one memset in hid_report_raw_event() Sasha Levin
2020-03-05 17:15 ` [PATCH AUTOSEL 4.9 04/12] HID: core: increase HID report buffer size to 8KiB Sasha Levin
2020-03-05 17:15 ` [PATCH AUTOSEL 4.9 05/12] HID: i2c-hid: add Trekstor Surfbook E11B to descriptor override Sasha Levin
2020-03-05 17:15 ` [PATCH AUTOSEL 4.9 06/12] MIPS: VPE: Fix a double free and a memory leak in 'release_vpe()' Sasha Levin
2020-03-05 17:15 ` [PATCH AUTOSEL 4.9 07/12] cfg80211: check reg_rule for NULL in handle_channel_custom() Sasha Levin
2020-03-05 17:15 ` Sasha Levin [this message]
2020-03-05 17:15 ` [PATCH AUTOSEL 4.9 09/12] mac80211: rx: avoid RCU list traversal under mutex Sasha Levin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200305171559.30422-8-sashal@kernel.org \
    --to=sashal@kernel.org \
    --cc=davem@davemloft.net \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lukas@wunner.de \
    --cc=marex@denx.de \
    --cc=netdev@vger.kernel.org \
    --cc=stable@vger.kernel.org \
    --cc=ynezz@true.cz \
    --cc=yuehaibing@huawei.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).