[PATCH] drm/i915/icl+: Don't enable DDI IO power on a TypeC port in TBT mode

[Imre Deak <imre.deak@intel.com>]

The DDI IO power well must not be enabled for a TypeC port in TBT mode,
ensure this during driver loading/system resume.

This gets rid of error messages like
[drm] *ERROR* power well DDI E TC2 IO state mismatch (refcount 1/enabled 0)

and avoids leaking the power ref when disabling the output.

Cc: <stable@vger.kernel.org> # v5.4+
Signed-off-by: Imre Deak <imre.deak@intel.com>
---
 drivers/gpu/drm/i915/display/intel_ddi.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c b/drivers/gpu/drm/i915/display/intel_ddi.c
index 916a802af788..654151d9a6db 100644
--- a/drivers/gpu/drm/i915/display/intel_ddi.c
+++ b/drivers/gpu/drm/i915/display/intel_ddi.c
@@ -1899,7 +1899,11 @@ static void intel_ddi_get_power_domains(struct intel_encoder *encoder,
 		return;
 
 	dig_port = enc_to_dig_port(encoder);
-	intel_display_power_get(dev_priv, dig_port->ddi_io_power_domain);
+
+	if (!intel_phy_is_tc(dev_priv, phy) ||
+	    dig_port->tc_mode != TC_PORT_TBT_ALT)
+		intel_display_power_get(dev_priv,
+					dig_port->ddi_io_power_domain);
 
 	/*
 	 * AUX power is only needed for (e)DP mode, and for HDMI mode on TC
-- 
2.23.1