stable.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Neil Armstrong <narmstrong@baylibre.com>,
	Dongjin Kim <tobetter@gmail.com>,
	Jianxin Pan <jianxin.pan@amlogic.com>,
	Thinh Nguyen <thinhn@synopsys.com>,
	Jun Li <lijun.kernel@gmail.com>, Tim <elatllat@gmail.com>,
	Felipe Balbi <balbi@kernel.org>, Sasha Levin <sashal@kernel.org>,
	linux-usb@vger.kernel.org
Subject: [PATCH AUTOSEL 4.14 16/22] usb: dwc3: core: add support for disabling SS instances in park mode
Date: Thu,  9 Apr 2020 23:50:38 -0400	[thread overview]
Message-ID: <20200410035044.9698-16-sashal@kernel.org> (raw)
In-Reply-To: <20200410035044.9698-1-sashal@kernel.org>

From: Neil Armstrong <narmstrong@baylibre.com>

[ Upstream commit 7ba6b09fda5e0cb741ee56f3264665e0edc64822 ]

In certain circumstances, the XHCI SuperSpeed instance in park mode
can fail to recover, thus on Amlogic G12A/G12B/SM1 SoCs when there is high
load on the single XHCI SuperSpeed instance, the controller can crash like:
 xhci-hcd xhci-hcd.0.auto: xHCI host not responding to stop endpoint command.
 xhci-hcd xhci-hcd.0.auto: Host halt failed, -110
 xhci-hcd xhci-hcd.0.auto: xHCI host controller not responding, assume dead
 xhci-hcd xhci-hcd.0.auto: xHCI host not responding to stop endpoint command.
 hub 2-1.1:1.0: hub_ext_port_status failed (err = -22)
 xhci-hcd xhci-hcd.0.auto: HC died; cleaning up
 usb 2-1.1-port1: cannot reset (err = -22)

Setting the PARKMODE_DISABLE_SS bit in the DWC3_USB3_GUCTL1 mitigates
the issue. The bit is described as :
"When this bit is set to '1' all SS bus instances in park mode are disabled"

Synopsys explains:
The GUCTL1.PARKMODE_DISABLE_SS is only available in
dwc_usb3 controller running in host mode.
This should not be set for other IPs.
This can be disabled by default based on IP, but I recommend to have a
property to enable this feature for devices that need this.

CC: Dongjin Kim <tobetter@gmail.com>
Cc: Jianxin Pan <jianxin.pan@amlogic.com>
Cc: Thinh Nguyen <thinhn@synopsys.com>
Cc: Jun Li <lijun.kernel@gmail.com>
Reported-by: Tim <elatllat@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/dwc3/core.c | 5 +++++
 drivers/usb/dwc3/core.h | 4 ++++
 2 files changed, 9 insertions(+)

diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 021899c580288..010201dbd029a 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -867,6 +867,9 @@ static int dwc3_core_init(struct dwc3 *dwc)
 		if (dwc->dis_tx_ipgap_linecheck_quirk)
 			reg |= DWC3_GUCTL1_TX_IPGAP_LINECHECK_DIS;
 
+		if (dwc->parkmode_disable_ss_quirk)
+			reg |= DWC3_GUCTL1_PARKMODE_DISABLE_SS;
+
 		dwc3_writel(dwc->regs, DWC3_GUCTL1, reg);
 	}
 
@@ -1107,6 +1110,8 @@ static void dwc3_get_properties(struct dwc3 *dwc)
 				"snps,dis-del-phy-power-chg-quirk");
 	dwc->dis_tx_ipgap_linecheck_quirk = device_property_read_bool(dev,
 				"snps,dis-tx-ipgap-linecheck-quirk");
+	dwc->parkmode_disable_ss_quirk = device_property_read_bool(dev,
+				"snps,parkmode-disable-ss-quirk");
 
 	dwc->tx_de_emphasis_quirk = device_property_read_bool(dev,
 				"snps,tx_de_emphasis_quirk");
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 40bf0e0768d96..8747f9f02229e 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -206,6 +206,7 @@
 #define DWC3_GCTL_DSBLCLKGTNG		BIT(0)
 
 /* Global User Control 1 Register */
+#define DWC3_GUCTL1_PARKMODE_DISABLE_SS	BIT(17)
 #define DWC3_GUCTL1_TX_IPGAP_LINECHECK_DIS	BIT(28)
 #define DWC3_GUCTL1_DEV_L1_EXIT_BY_HW	BIT(24)
 
@@ -863,6 +864,8 @@ struct dwc3_scratchpad_array {
  *			change quirk.
  * @dis_tx_ipgap_linecheck_quirk: set if we disable u2mac linestate
  *			check during HS transmit.
+ * @parkmode_disable_ss_quirk: set if we need to disable all SuperSpeed
+ *			instances in park mode.
  * @tx_de_emphasis_quirk: set if we enable Tx de-emphasis quirk
  * @tx_de_emphasis: Tx de-emphasis value
  * 	0	- -6dB de-emphasis
@@ -1022,6 +1025,7 @@ struct dwc3 {
 	unsigned		dis_u2_freeclk_exists_quirk:1;
 	unsigned		dis_del_phy_power_chg_quirk:1;
 	unsigned		dis_tx_ipgap_linecheck_quirk:1;
+	unsigned		parkmode_disable_ss_quirk:1;
 
 	unsigned		tx_de_emphasis_quirk:1;
 	unsigned		tx_de_emphasis:2;
-- 
2.20.1


  parent reply	other threads:[~2020-04-10  3:53 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-04-10  3:50 [PATCH AUTOSEL 4.14 01/22] null_blk: Fix the null_add_dev() error path Sasha Levin
2020-04-10  3:50 ` [PATCH AUTOSEL 4.14 02/22] null_blk: Handle null_add_dev() failures properly Sasha Levin
2020-04-10  3:50 ` [PATCH AUTOSEL 4.14 03/22] null_blk: fix spurious IO errors after failed past-wp access Sasha Levin
2020-04-10  3:50 ` [PATCH AUTOSEL 4.14 04/22] x86: Don't let pgprot_modify() change the page encryption bit Sasha Levin
2020-04-10  3:50 ` [PATCH AUTOSEL 4.14 05/22] block: keep bdi->io_pages in sync with max_sectors_kb for stacked devices Sasha Levin
2020-04-10  3:50 ` [PATCH AUTOSEL 4.14 06/22] irqchip/versatile-fpga: Handle chained IRQs properly Sasha Levin
2020-04-10  3:50 ` [PATCH AUTOSEL 4.14 07/22] sched: Avoid scale real weight down to zero Sasha Levin
2020-04-10  3:50 ` [PATCH AUTOSEL 4.14 08/22] selftests/x86/ptrace_syscall_32: Fix no-vDSO segfault Sasha Levin
2020-04-10  3:50 ` [PATCH AUTOSEL 4.14 09/22] PCI/switchtec: Fix init_completion race condition with poll_wait() Sasha Levin
2020-04-10  3:50 ` [PATCH AUTOSEL 4.14 10/22] libata: Remove extra scsi_host_put() in ata_scsi_add_hosts() Sasha Levin
2020-04-10  3:50 ` [PATCH AUTOSEL 4.14 11/22] gfs2: Don't demote a glock until its revokes are written Sasha Levin
2020-04-10  3:50 ` [PATCH AUTOSEL 4.14 12/22] x86/boot: Use unsigned comparison for addresses Sasha Levin
2020-04-10  3:50 ` [PATCH AUTOSEL 4.14 13/22] efi/x86: Ignore the memory attributes table on i386 Sasha Levin
2020-04-10  3:50 ` [PATCH AUTOSEL 4.14 14/22] genirq/irqdomain: Check pointer in irq_domain_alloc_irqs_hierarchy() Sasha Levin
2020-04-10  3:50 ` [PATCH AUTOSEL 4.14 15/22] block: Fix use-after-free issue accessing struct io_cq Sasha Levin
2020-04-10  3:50 ` Sasha Levin [this message]
2020-04-10  3:50 ` [PATCH AUTOSEL 4.14 17/22] irqchip/gic-v4: Provide irq_retrigger to avoid circular locking dependency Sasha Levin
2020-04-10  3:50 ` [PATCH AUTOSEL 4.14 18/22] locking/lockdep: Avoid recursion in lockdep_count_{for,back}ward_deps() Sasha Levin
2020-04-10  3:50 ` [PATCH AUTOSEL 4.14 19/22] block, bfq: fix use-after-free in bfq_idle_slice_timer_body Sasha Levin
2020-04-10  3:50 ` [PATCH AUTOSEL 4.14 20/22] btrfs: hold a ref on the root in btrfs_recover_relocation Sasha Levin
2020-04-10  3:50 ` [PATCH AUTOSEL 4.14 21/22] btrfs: remove a BUG_ON() from merge_reloc_roots() Sasha Levin
2020-04-10  3:50 ` [PATCH AUTOSEL 4.14 22/22] btrfs: track reloc roots based on their commit root bytenr Sasha Levin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200410035044.9698-16-sashal@kernel.org \
    --to=sashal@kernel.org \
    --cc=balbi@kernel.org \
    --cc=elatllat@gmail.com \
    --cc=jianxin.pan@amlogic.com \
    --cc=lijun.kernel@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=narmstrong@baylibre.com \
    --cc=stable@vger.kernel.org \
    --cc=thinhn@synopsys.com \
    --cc=tobetter@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).