stable.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	stable@vger.kernel.org, Florian Fainelli <f.fainelli@gmail.com>,
	"David S. Miller" <davem@davemloft.net>,
	Sasha Levin <sashal@kernel.org>
Subject: [PATCH 4.14 14/22] net: dsa: b53: Rework ARL bin logic
Date: Fri,  8 May 2020 14:35:26 +0200	[thread overview]
Message-ID: <20200508123035.644487204@linuxfoundation.org> (raw)
In-Reply-To: <20200508123033.915895060@linuxfoundation.org>

From: Florian Fainelli <f.fainelli@gmail.com>

[ Upstream commit 6344dbde6a27d10d16246d734b968f84887841e2 ]

When asking the ARL to read a MAC address, we will get a number of bins
returned in a single read. Out of those bins, there can essentially be 3
states:

- all bins are full, we have no space left, and we can either replace an
  existing address or return that full condition

- the MAC address was found, then we need to return its bin index and
  modify that one, and only that one

- the MAC address was not found and we have a least one bin free, we use
  that bin index location then

The code would unfortunately fail on all counts.

Fixes: 1da6df85c6fb ("net: dsa: b53: Implement ARL add/del/dump operations")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/dsa/b53/b53_common.c | 30 ++++++++++++++++++++++++++----
 drivers/net/dsa/b53/b53_regs.h   |  3 +++
 2 files changed, 29 insertions(+), 4 deletions(-)

diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index 434e6dced6b7f..274d369151107 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -1094,6 +1094,7 @@ static int b53_arl_read(struct b53_device *dev, u64 mac,
 			u16 vid, struct b53_arl_entry *ent, u8 *idx,
 			bool is_valid)
 {
+	DECLARE_BITMAP(free_bins, B53_ARLTBL_MAX_BIN_ENTRIES);
 	unsigned int i;
 	int ret;
 
@@ -1101,6 +1102,8 @@ static int b53_arl_read(struct b53_device *dev, u64 mac,
 	if (ret)
 		return ret;
 
+	bitmap_zero(free_bins, dev->num_arl_entries);
+
 	/* Read the bins */
 	for (i = 0; i < dev->num_arl_entries; i++) {
 		u64 mac_vid;
@@ -1112,13 +1115,21 @@ static int b53_arl_read(struct b53_device *dev, u64 mac,
 			   B53_ARLTBL_DATA_ENTRY(i), &fwd_entry);
 		b53_arl_to_entry(ent, mac_vid, fwd_entry);
 
-		if (!(fwd_entry & ARLTBL_VALID))
+		if (!(fwd_entry & ARLTBL_VALID)) {
+			set_bit(i, free_bins);
 			continue;
+		}
 		if ((mac_vid & ARLTBL_MAC_MASK) != mac)
 			continue;
 		*idx = i;
+		return 0;
 	}
 
+	if (bitmap_weight(free_bins, dev->num_arl_entries) == 0)
+		return -ENOSPC;
+
+	*idx = find_first_bit(free_bins, dev->num_arl_entries);
+
 	return -ENOENT;
 }
 
@@ -1148,10 +1159,21 @@ static int b53_arl_op(struct b53_device *dev, int op, int port,
 	if (op)
 		return ret;
 
-	/* We could not find a matching MAC, so reset to a new entry */
-	if (ret) {
+	switch (ret) {
+	case -ENOSPC:
+		dev_dbg(dev->dev, "{%pM,%.4d} no space left in ARL\n",
+			addr, vid);
+		return is_valid ? ret : 0;
+	case -ENOENT:
+		/* We could not find a matching MAC, so reset to a new entry */
+		dev_dbg(dev->dev, "{%pM,%.4d} not found, using idx: %d\n",
+			addr, vid, idx);
 		fwd_entry = 0;
-		idx = 1;
+		break;
+	default:
+		dev_dbg(dev->dev, "{%pM,%.4d} found, using idx: %d\n",
+			addr, vid, idx);
+		break;
 	}
 
 	memset(&ent, 0, sizeof(ent));
diff --git a/drivers/net/dsa/b53/b53_regs.h b/drivers/net/dsa/b53/b53_regs.h
index 1b2a337d673dd..247aef92b7594 100644
--- a/drivers/net/dsa/b53/b53_regs.h
+++ b/drivers/net/dsa/b53/b53_regs.h
@@ -313,6 +313,9 @@
 #define   ARLTBL_STATIC			BIT(15)
 #define   ARLTBL_VALID			BIT(16)
 
+/* Maximum number of bin entries in the ARL for all switches */
+#define B53_ARLTBL_MAX_BIN_ENTRIES	4
+
 /* ARL Search Control Register (8 bit) */
 #define B53_ARL_SRCH_CTL		0x50
 #define B53_ARL_SRCH_CTL_25		0x20
-- 
2.20.1




  parent reply	other threads:[~2020-05-08 12:50 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-08 12:35 [PATCH 4.14 00/22] 4.14.180-rc1 review Greg Kroah-Hartman
2020-05-08 12:35 ` [PATCH 4.14 01/22] vhost: vsock: kick send_pkt worker once device is started Greg Kroah-Hartman
2020-05-08 12:35 ` [PATCH 4.14 02/22] powerpc/pci/of: Parse unassigned resources Greg Kroah-Hartman
2020-05-08 12:35 ` [PATCH 4.14 03/22] ASoC: topology: Check return value of pcm_new_ver Greg Kroah-Hartman
2020-05-08 12:35 ` [PATCH 4.14 04/22] selftests/ipc: Fix test failure seen after initial test run Greg Kroah-Hartman
2020-05-08 12:35 ` [PATCH 4.14 05/22] ASoC: sgtl5000: Fix VAG power-on handling Greg Kroah-Hartman
2020-05-08 12:35 ` [PATCH 4.14 06/22] ASoC: rsnd: Fix HDMI channel mapping for multi-SSI mode Greg Kroah-Hartman
2020-05-08 12:35 ` [PATCH 4.14 07/22] ASoC: codecs: hdac_hdmi: Fix incorrect use of list_for_each_entry Greg Kroah-Hartman
2020-05-08 12:35 ` [PATCH 4.14 08/22] wimax/i2400m: Fix potential urb refcnt leak Greg Kroah-Hartman
2020-05-08 12:35 ` [PATCH 4.14 09/22] net: stmmac: fix enabling socfpgas ptp_ref_clock Greg Kroah-Hartman
2020-05-08 12:35 ` [PATCH 4.14 10/22] net: stmmac: Fix sub-second increment Greg Kroah-Hartman
2020-05-08 12:35 ` [PATCH 4.14 11/22] cifs: protect updating server->dstaddr with a spinlock Greg Kroah-Hartman
2020-05-08 12:35 ` [PATCH 4.14 12/22] s390/ftrace: fix potential crashes when switching tracers Greg Kroah-Hartman
2020-05-08 12:35 ` [PATCH 4.14 13/22] scripts/config: allow colons in option strings for sed Greg Kroah-Hartman
2020-05-08 12:35 ` Greg Kroah-Hartman [this message]
2020-05-08 12:35 ` [PATCH 4.14 15/22] lib/mpi: Fix building for powerpc with clang Greg Kroah-Hartman
2020-05-08 12:35 ` [PATCH 4.14 16/22] net: bcmgenet: suppress warnings on failed Rx SKB allocations Greg Kroah-Hartman
2020-05-08 12:35 ` [PATCH 4.14 17/22] net: systemport: " Greg Kroah-Hartman
2020-05-08 12:35 ` [PATCH 4.14 18/22] sctp: Fix SHUTDOWN CTSN Ack in the peer restart case Greg Kroah-Hartman
2020-05-08 12:35 ` [PATCH 4.14 19/22] tracing: Reverse the order of trace_types_lock and event_mutex Greg Kroah-Hartman
2020-05-08 12:35 ` [PATCH 4.14 20/22] ALSA: hda: Match both PCI ID and SSID for driver blacklist Greg Kroah-Hartman
2020-05-08 12:35 ` [PATCH 4.14 21/22] mac80211: add ieee80211_is_any_nullfunc() Greg Kroah-Hartman
2020-05-08 12:35 ` [PATCH 4.14 22/22] cgroup, netclassid: remove double cond_resched Greg Kroah-Hartman
2020-05-08 21:05 ` [PATCH 4.14 00/22] 4.14.180-rc1 review Guenter Roeck
2020-05-09  9:12 ` Naresh Kamboju
2020-05-11 16:54 ` shuah

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200508123035.644487204@linuxfoundation.org \
    --to=gregkh@linuxfoundation.org \
    --cc=davem@davemloft.net \
    --cc=f.fainelli@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=sashal@kernel.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).