From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
stable@vger.kernel.org,
Valentin Longchamp <valentin@longchamp.me>,
Matteo Ghidoni <matteo.ghidoni@ch.abb.com>,
"David S. Miller" <davem@davemloft.net>,
Sasha Levin <sashal@kernel.org>
Subject: [PATCH 4.4 12/36] net/ethernet/freescale: rework quiesce/activate for ucc_geth
Date: Tue, 9 Jun 2020 19:44:12 +0200 [thread overview]
Message-ID: <20200609173933.983120800@linuxfoundation.org> (raw)
In-Reply-To: <20200609173933.288044334@linuxfoundation.org>
From: Valentin Longchamp <valentin@longchamp.me>
[ Upstream commit 79dde73cf9bcf1dd317a2667f78b758e9fe139ed ]
ugeth_quiesce/activate are used to halt the controller when there is a
link change that requires to reconfigure the mac.
The previous implementation called netif_device_detach(). This however
causes the initial activation of the netdevice to fail precisely because
it's detached. For details, see [1].
A possible workaround was the revert of commit
net: linkwatch: add check for netdevice being present to linkwatch_do_dev
However, the check introduced in the above commit is correct and shall be
kept.
The netif_device_detach() is thus replaced with
netif_tx_stop_all_queues() that prevents any tranmission. This allows to
perform mac config change required by the link change, without detaching
the corresponding netdevice and thus not preventing its initial
activation.
[1] https://lists.openwall.net/netdev/2020/01/08/201
Signed-off-by: Valentin Longchamp <valentin@longchamp.me>
Acked-by: Matteo Ghidoni <matteo.ghidoni@ch.abb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/freescale/ucc_geth.c | 13 +++++++------
1 file changed, 7 insertions(+), 6 deletions(-)
diff --git a/drivers/net/ethernet/freescale/ucc_geth.c b/drivers/net/ethernet/freescale/ucc_geth.c
index 55ac00055977..96a1f62cc148 100644
--- a/drivers/net/ethernet/freescale/ucc_geth.c
+++ b/drivers/net/ethernet/freescale/ucc_geth.c
@@ -45,6 +45,7 @@
#include <asm/ucc.h>
#include <asm/ucc_fast.h>
#include <asm/machdep.h>
+#include <net/sch_generic.h>
#include "ucc_geth.h"
@@ -1551,11 +1552,8 @@ static int ugeth_disable(struct ucc_geth_private *ugeth, enum comm_dir mode)
static void ugeth_quiesce(struct ucc_geth_private *ugeth)
{
- /* Prevent any further xmits, plus detach the device. */
- netif_device_detach(ugeth->ndev);
-
- /* Wait for any current xmits to finish. */
- netif_tx_disable(ugeth->ndev);
+ /* Prevent any further xmits */
+ netif_tx_stop_all_queues(ugeth->ndev);
/* Disable the interrupt to avoid NAPI rescheduling. */
disable_irq(ugeth->ug_info->uf_info.irq);
@@ -1568,7 +1566,10 @@ static void ugeth_activate(struct ucc_geth_private *ugeth)
{
napi_enable(&ugeth->napi);
enable_irq(ugeth->ug_info->uf_info.irq);
- netif_device_attach(ugeth->ndev);
+
+ /* allow to xmit again */
+ netif_tx_wake_all_queues(ugeth->ndev);
+ __netdev_watchdog_up(ugeth->ndev);
}
/* Called every time the controller might need to be made
--
2.25.1
next prev parent reply other threads:[~2020-06-09 18:24 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-09 17:44 [PATCH 4.4 00/36] 4.4.227-rc1 review Greg Kroah-Hartman
2020-06-09 17:44 ` [PATCH 4.4 01/36] scsi: scsi_devinfo: fixup string compare Greg Kroah-Hartman
2020-06-09 17:44 ` [PATCH 4.4 02/36] usb: gadget: f_uac2: fix error handling in afunc_bind (again) Greg Kroah-Hartman
2020-06-09 17:44 ` [PATCH 4.4 03/36] platform/x86: acer-wmi: setup accelerometer when ACPI device was found Greg Kroah-Hartman
2020-06-09 17:44 ` [PATCH 4.4 04/36] esp6: fix memleak on error path in esp6_input Greg Kroah-Hartman
2020-06-09 17:44 ` [PATCH 4.4 05/36] IB/mlx4: Fix an error handling path in mlx4_ib_rereg_user_mr() Greg Kroah-Hartman
2020-06-09 17:44 ` [PATCH 4.4 06/36] ALSA: hda - No loopback on ALC299 codec Greg Kroah-Hartman
2020-06-09 17:44 ` [PATCH 4.4 07/36] spi: dw: use "smp_mb()" to avoid sending spi data error Greg Kroah-Hartman
2020-06-09 17:44 ` [PATCH 4.4 08/36] s390/ftrace: save traced function caller Greg Kroah-Hartman
2020-06-09 17:44 ` [PATCH 4.4 09/36] ARC: Fix ICCM & DCCM runtime size checks Greg Kroah-Hartman
2020-06-09 17:44 ` [PATCH 4.4 10/36] x86/mmiotrace: Use cpumask_available() for cpumask_var_t variables Greg Kroah-Hartman
2020-06-09 17:44 ` [PATCH 4.4 11/36] net: bmac: Fix read of MAC address from ROM Greg Kroah-Hartman
2020-06-09 17:44 ` Greg Kroah-Hartman [this message]
2020-06-09 17:44 ` [PATCH 4.4 13/36] net: ethernet: stmmac: Enable interface clocks on probe for IPQ806x Greg Kroah-Hartman
2020-06-09 17:44 ` [PATCH 4.4 14/36] pppoe: only process PADT targeted at local interfaces Greg Kroah-Hartman
2020-06-09 17:44 ` [PATCH 4.4 15/36] mmc: fix compilation of user API Greg Kroah-Hartman
2020-06-09 17:44 ` [PATCH 4.4 16/36] slcan: Fix double-free on slcan_open() error path Greg Kroah-Hartman
2020-06-09 17:44 ` [PATCH 4.4 17/36] slip: not call free_netdev before rtnl_unlock in slip_open Greg Kroah-Hartman
2020-06-09 17:44 ` [PATCH 4.4 18/36] scsi: ufs: Release clock if DMA map fails Greg Kroah-Hartman
2020-06-09 17:44 ` [PATCH 4.4 19/36] devinet: fix memleak in inetdev_init() Greg Kroah-Hartman
2020-06-09 17:44 ` [PATCH 4.4 20/36] NFC: st21nfca: add missed kfree_skb() in an error path Greg Kroah-Hartman
2020-06-09 17:44 ` [PATCH 4.4 21/36] vsock: fix timeout in vsock_accept() Greg Kroah-Hartman
2020-06-09 17:44 ` [PATCH 4.4 22/36] l2tp: add sk_family checks to l2tp_validate_socket Greg Kroah-Hartman
2020-06-09 17:44 ` [PATCH 4.4 23/36] l2tp: do not use inet_hash()/inet_unhash() Greg Kroah-Hartman
2020-06-09 17:44 ` [PATCH 4.4 24/36] USB: serial: qcserial: add DW5816e QDL support Greg Kroah-Hartman
2020-06-09 17:44 ` [PATCH 4.4 25/36] USB: serial: usb_wwan: do not resubmit rx urb on fatal errors Greg Kroah-Hartman
2020-06-09 17:44 ` [PATCH 4.4 26/36] USB: serial: option: add Telit LE910C1-EUX compositions Greg Kroah-Hartman
2020-06-09 17:44 ` [PATCH 4.4 27/36] vt: keyboard: avoid signed integer overflow in k_ascii Greg Kroah-Hartman
2020-06-09 17:44 ` [PATCH 4.4 28/36] staging: rtl8712: Fix IEEE80211_ADDBA_PARAM_BUF_SIZE_MASK Greg Kroah-Hartman
2020-06-09 17:44 ` [PATCH 4.4 29/36] x86/cpu: Rename cpu_data.x86_mask to cpu_data.x86_stepping Greg Kroah-Hartman
2020-06-09 17:44 ` [PATCH 4.4 30/36] x86/cpu: Add a steppings field to struct x86_cpu_id Greg Kroah-Hartman
2020-06-09 17:44 ` [PATCH 4.4 31/36] x86/cpu: Add table argument to cpu_matches() Greg Kroah-Hartman
2020-06-09 17:44 ` [PATCH 4.4 32/36] x86/speculation: Add Special Register Buffer Data Sampling (SRBDS) mitigation Greg Kroah-Hartman
2020-06-09 17:44 ` [PATCH 4.4 33/36] x86/speculation: Add SRBDS vulnerability and mitigation documentation Greg Kroah-Hartman
2020-06-09 17:44 ` [PATCH 4.4 34/36] x86/speculation: Add Ivy Bridge to affected list Greg Kroah-Hartman
2020-06-09 17:44 ` [PATCH 4.4 35/36] iio: vcnl4000: Fix i2c swapped word reading Greg Kroah-Hartman
2020-06-09 17:44 ` [PATCH 4.4 36/36] uprobes: ensure that uprobe->offset and ->ref_ctr_offset are properly aligned Greg Kroah-Hartman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200609173933.983120800@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=davem@davemloft.net \
--cc=linux-kernel@vger.kernel.org \
--cc=matteo.ghidoni@ch.abb.com \
--cc=sashal@kernel.org \
--cc=stable@vger.kernel.org \
--cc=valentin@longchamp.me \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).