[PATCH 5.7 09/24] iio: adc: stm32-adc: fix a wrong error message when probing interrupts

[Greg Kroah-Hartman <gregkh@linuxfoundation.org>]

From: Fabrice Gasnier <fabrice.gasnier@st.com>

commit 10134ec3f8cefa6a40fe84987f1795e9e0da9715 upstream.

A wrong error message is printed out currently, like on STM32MP15:
- stm32-adc-core 48003000.adc: IRQ index 2 not found.

This is seen since commit 7723f4c5ecdb ("driver core: platform: Add an
error message to platform_get_irq*()").
The STM32 ADC core driver wrongly requests up to 3 interrupt lines. It
should request only the necessary IRQs, based on the compatible:
- stm32f4/h7 ADCs share a common interrupt
- stm32mp1, has one interrupt line per ADC.
So add the number of required interrupts to the compatible data.

Fixes: d58c67d1d851 ("iio: adc: stm32-adc: add support for STM32MP1")
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/iio/adc/stm32-adc-core.c |   34 ++++++++++++++--------------------
 1 file changed, 14 insertions(+), 20 deletions(-)

--- a/drivers/iio/adc/stm32-adc-core.c
+++ b/drivers/iio/adc/stm32-adc-core.c
@@ -65,12 +65,14 @@ struct stm32_adc_priv;
  * @clk_sel:	clock selection routine
  * @max_clk_rate_hz: maximum analog clock rate (Hz, from datasheet)
  * @has_syscfg: SYSCFG capability flags
+ * @num_irqs:	number of interrupt lines
  */
 struct stm32_adc_priv_cfg {
 	const struct stm32_adc_common_regs *regs;
 	int (*clk_sel)(struct platform_device *, struct stm32_adc_priv *);
 	u32 max_clk_rate_hz;
 	unsigned int has_syscfg;
+	unsigned int num_irqs;
 };
 
 /**
@@ -375,21 +377,15 @@ static int stm32_adc_irq_probe(struct pl
 	struct device_node *np = pdev->dev.of_node;
 	unsigned int i;
 
-	for (i = 0; i < STM32_ADC_MAX_ADCS; i++) {
+	/*
+	 * Interrupt(s) must be provided, depending on the compatible:
+	 * - stm32f4/h7 shares a common interrupt line.
+	 * - stm32mp1, has one line per ADC
+	 */
+	for (i = 0; i < priv->cfg->num_irqs; i++) {
 		priv->irq[i] = platform_get_irq(pdev, i);
-		if (priv->irq[i] < 0) {
-			/*
-			 * At least one interrupt must be provided, make others
-			 * optional:
-			 * - stm32f4/h7 shares a common interrupt.
-			 * - stm32mp1, has one line per ADC (either for ADC1,
-			 *   ADC2 or both).
-			 */
-			if (i && priv->irq[i] == -ENXIO)
-				continue;
-
+		if (priv->irq[i] < 0)
 			return priv->irq[i];
-		}
 	}
 
 	priv->domain = irq_domain_add_simple(np, STM32_ADC_MAX_ADCS, 0,
@@ -400,9 +396,7 @@ static int stm32_adc_irq_probe(struct pl
 		return -ENOMEM;
 	}
 
-	for (i = 0; i < STM32_ADC_MAX_ADCS; i++) {
-		if (priv->irq[i] < 0)
-			continue;
+	for (i = 0; i < priv->cfg->num_irqs; i++) {
 		irq_set_chained_handler(priv->irq[i], stm32_adc_irq_handler);
 		irq_set_handler_data(priv->irq[i], priv);
 	}
@@ -420,11 +414,8 @@ static void stm32_adc_irq_remove(struct
 		irq_dispose_mapping(irq_find_mapping(priv->domain, hwirq));
 	irq_domain_remove(priv->domain);
 
-	for (i = 0; i < STM32_ADC_MAX_ADCS; i++) {
-		if (priv->irq[i] < 0)
-			continue;
+	for (i = 0; i < priv->cfg->num_irqs; i++)
 		irq_set_chained_handler(priv->irq[i], NULL);
-	}
 }
 
 static int stm32_adc_core_switches_supply_en(struct stm32_adc_priv *priv,
@@ -817,6 +808,7 @@ static const struct stm32_adc_priv_cfg s
 	.regs = &stm32f4_adc_common_regs,
 	.clk_sel = stm32f4_adc_clk_sel,
 	.max_clk_rate_hz = 36000000,
+	.num_irqs = 1,
 };
 
 static const struct stm32_adc_priv_cfg stm32h7_adc_priv_cfg = {
@@ -824,6 +816,7 @@ static const struct stm32_adc_priv_cfg s
 	.clk_sel = stm32h7_adc_clk_sel,
 	.max_clk_rate_hz = 36000000,
 	.has_syscfg = HAS_VBOOSTER,
+	.num_irqs = 1,
 };
 
 static const struct stm32_adc_priv_cfg stm32mp1_adc_priv_cfg = {
@@ -831,6 +824,7 @@ static const struct stm32_adc_priv_cfg s
 	.clk_sel = stm32h7_adc_clk_sel,
 	.max_clk_rate_hz = 40000000,
 	.has_syscfg = HAS_VBOOSTER | HAS_ANASWVDD,
+	.num_irqs = 2,
 };
 
 static const struct of_device_id stm32_adc_of_match[] = {