From: Thomas Zimmermann <tzimmermann@suse.de>
To: airlied@redhat.com, daniel@ffwll.ch, sam@ravnborg.org,
kraxel@redhat.com, emil.l.velikov@gmail.com
Cc: dri-devel@lists.freedesktop.org,
Thomas Zimmermann <tzimmermann@suse.de>,
Daniel Vetter <daniel.vetter@ffwll.ch>,
"Y.C. Chen" <yc_chen@aspeedtech.com>,
stable@vger.kernel.org
Subject: [PATCH 2/3] drm/ast: Store image size in HW cursor info
Date: Mon, 27 Jul 2020 09:37:06 +0200 [thread overview]
Message-ID: <20200727073707.21097-3-tzimmermann@suse.de> (raw)
In-Reply-To: <20200727073707.21097-1-tzimmermann@suse.de>
Store the image size as part of the HW cursor info, so that the
cursor show function doesn't require the information from the
caller. No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 4961eb60f145 ("drm/ast: Enable atomic modesetting")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Cc: "Y.C. Chen" <yc_chen@aspeedtech.com>
Cc: <stable@vger.kernel.org> # v5.6+
---
drivers/gpu/drm/ast/ast_cursor.c | 13 +++++++++++--
drivers/gpu/drm/ast/ast_drv.h | 7 +++++--
drivers/gpu/drm/ast/ast_mode.c | 8 +-------
3 files changed, 17 insertions(+), 11 deletions(-)
diff --git a/drivers/gpu/drm/ast/ast_cursor.c b/drivers/gpu/drm/ast/ast_cursor.c
index acf0d23514e8..8642a0ce9da6 100644
--- a/drivers/gpu/drm/ast/ast_cursor.c
+++ b/drivers/gpu/drm/ast/ast_cursor.c
@@ -87,6 +87,8 @@ int ast_cursor_init(struct ast_private *ast)
ast->cursor.gbo[i] = gbo;
ast->cursor.vaddr[i] = vaddr;
+ ast->cursor.size[i].width = 0;
+ ast->cursor.size[i].height = 0;
}
return drmm_add_action_or_reset(dev, ast_cursor_release, NULL);
@@ -194,6 +196,9 @@ int ast_cursor_blit(struct ast_private *ast, struct drm_framebuffer *fb)
/* do data transfer to cursor BO */
update_cursor_image(dst, src, fb->width, fb->height);
+ ast->cursor.size[ast->cursor.next_index].width = fb->width;
+ ast->cursor.size[ast->cursor.next_index].height = fb->height;
+
drm_gem_vram_vunmap(gbo, src);
drm_gem_vram_unpin(gbo);
@@ -249,14 +254,18 @@ static void ast_cursor_set_location(struct ast_private *ast, u16 x, u16 y,
ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0xc7, y1);
}
-void ast_cursor_show(struct ast_private *ast, int x, int y,
- unsigned int offset_x, unsigned int offset_y)
+void ast_cursor_show(struct ast_private *ast, int x, int y)
{
+ unsigned int offset_x, offset_y;
u8 x_offset, y_offset;
u8 __iomem *dst, __iomem *sig;
u8 jreg;
dst = ast->cursor.vaddr[ast->cursor.next_index];
+ offset_x = AST_MAX_HWC_WIDTH -
+ ast->cursor.size[ast->cursor.next_index].width;
+ offset_y = AST_MAX_HWC_HEIGHT -
+ ast->cursor.size[ast->cursor.next_index].height;
sig = dst + AST_HWC_SIZE;
writel(x, sig + AST_HWC_SIGNATURE_X);
diff --git a/drivers/gpu/drm/ast/ast_drv.h b/drivers/gpu/drm/ast/ast_drv.h
index e3a264ac7ee2..57414b429db3 100644
--- a/drivers/gpu/drm/ast/ast_drv.h
+++ b/drivers/gpu/drm/ast/ast_drv.h
@@ -116,6 +116,10 @@ struct ast_private {
struct {
struct drm_gem_vram_object *gbo[AST_DEFAULT_HWC_NUM];
void __iomem *vaddr[AST_DEFAULT_HWC_NUM];
+ struct {
+ unsigned int width;
+ unsigned int height;
+ } size[AST_DEFAULT_HWC_NUM];
unsigned int next_index;
} cursor;
@@ -311,8 +315,7 @@ void ast_release_firmware(struct drm_device *dev);
int ast_cursor_init(struct ast_private *ast);
int ast_cursor_blit(struct ast_private *ast, struct drm_framebuffer *fb);
void ast_cursor_page_flip(struct ast_private *ast);
-void ast_cursor_show(struct ast_private *ast, int x, int y,
- unsigned int offset_x, unsigned int offset_y);
+void ast_cursor_show(struct ast_private *ast, int x, int y);
void ast_cursor_hide(struct ast_private *ast);
#endif
diff --git a/drivers/gpu/drm/ast/ast_mode.c b/drivers/gpu/drm/ast/ast_mode.c
index 3680a000b812..5b2b39c93033 100644
--- a/drivers/gpu/drm/ast/ast_mode.c
+++ b/drivers/gpu/drm/ast/ast_mode.c
@@ -671,20 +671,14 @@ ast_cursor_plane_helper_atomic_update(struct drm_plane *plane,
struct drm_plane_state *old_state)
{
struct drm_plane_state *state = plane->state;
- struct drm_framebuffer *fb = state->fb;
struct ast_private *ast = plane->dev->dev_private;
- unsigned int offset_x, offset_y;
-
- offset_x = AST_MAX_HWC_WIDTH - fb->width;
- offset_y = AST_MAX_HWC_WIDTH - fb->height;
if (state->fb != old_state->fb) {
/* A new cursor image was installed. */
ast_cursor_page_flip(ast);
}
- ast_cursor_show(ast, state->crtc_x, state->crtc_y,
- offset_x, offset_y);
+ ast_cursor_show(ast, state->crtc_x, state->crtc_y);
}
static void
--
2.27.0
next prev parent reply other threads:[~2020-07-27 7:37 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20200727073707.21097-1-tzimmermann@suse.de>
2020-07-27 7:37 ` [PATCH 1/3] drm/ast: Do full modeset if the primary plane's format changes Thomas Zimmermann
2020-07-27 10:40 ` daniel
2020-07-27 11:24 ` Thomas Zimmermann
2020-07-27 18:31 ` Daniel Vetter
2020-07-27 7:37 ` Thomas Zimmermann [this message]
2020-07-27 10:42 ` [PATCH 2/3] drm/ast: Store image size in HW cursor info daniel
2020-07-27 11:37 ` Thomas Zimmermann
2020-07-27 18:32 ` Daniel Vetter
2020-07-27 7:37 ` [PATCH 3/3] drm/ast: Disable cursor while switching display modes Thomas Zimmermann
2020-07-27 10:46 ` daniel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200727073707.21097-3-tzimmermann@suse.de \
--to=tzimmermann@suse.de \
--cc=airlied@redhat.com \
--cc=daniel.vetter@ffwll.ch \
--cc=daniel@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=emil.l.velikov@gmail.com \
--cc=kraxel@redhat.com \
--cc=sam@ravnborg.org \
--cc=stable@vger.kernel.org \
--cc=yc_chen@aspeedtech.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox