From: Cezary Rojewski <cezary.rojewski@intel.com>
To: stable@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: alsa-devel@alsa-project.org, broonie@kernel.org, tiwai@suse.com,
pierre-louis.bossart@linux.intel.com,
mateusz.gorski@linux.intel.com,
Cezary Rojewski <cezary.rojewski@intel.com>
Subject: [PATCH 1/8] ASoC: Intel: Skylake: Remove superfluous chip initialization
Date: Sun, 29 Nov 2020 12:41:41 +0100 [thread overview]
Message-ID: <20201129114148.13772-2-cezary.rojewski@intel.com> (raw)
In-Reply-To: <20201129114148.13772-1-cezary.rojewski@intel.com>
commit 2ef81057d80456870b97890dd79c8f56a85b1242 upstream.
Skylake driver does the controller init operation twice:
- first during probe (only to stop it just before scheduling probe_work)
- and during said probe_work where the actual correct sequence is
executed
To properly complete boot sequence when iDisp codec is present, bus
initialization has to be called only after _i915_init() finishes.
With additional _reset_list preceding _i915_init(), iDisp codec never
gets the chance to enumerate on the link. Remove the superfluous
initialization to address the issue.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200305145314.32579-2-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: <stable@vger.kernel.org> # 5.4.x
---
sound/soc/intel/skylake/skl.c | 13 ++++---------
1 file changed, 4 insertions(+), 9 deletions(-)
diff --git a/sound/soc/intel/skylake/skl.c b/sound/soc/intel/skylake/skl.c
index 141dbbf975ac..861c07417fed 100644
--- a/sound/soc/intel/skylake/skl.c
+++ b/sound/soc/intel/skylake/skl.c
@@ -807,6 +807,9 @@ static void skl_probe_work(struct work_struct *work)
return;
}
+ skl_init_pci(skl);
+ skl_dum_set(bus);
+
err = skl_init_chip(bus, true);
if (err < 0) {
dev_err(bus->dev, "Init chip failed with err: %d\n", err);
@@ -922,8 +925,6 @@ static int skl_first_init(struct hdac_bus *bus)
return -ENXIO;
}
- snd_hdac_bus_reset_link(bus, true);
-
snd_hdac_bus_parse_capabilities(bus);
/* check if PPCAP exists */
@@ -971,11 +972,7 @@ static int skl_first_init(struct hdac_bus *bus)
if (err < 0)
return err;
- /* initialize chip */
- skl_init_pci(skl);
- skl_dum_set(bus);
-
- return skl_init_chip(bus, true);
+ return 0;
}
static int skl_probe(struct pci_dev *pci,
@@ -1080,8 +1077,6 @@ static int skl_probe(struct pci_dev *pci,
if (bus->mlcap)
snd_hdac_ext_bus_get_ml_capabilities(bus);
- snd_hdac_bus_stop_chip(bus);
-
/* create device for soc dmic */
err = skl_dmic_device_register(skl);
if (err < 0) {
--
2.17.1
next prev parent reply other threads:[~2020-11-29 11:44 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-11-29 11:41 [PATCH 0/8] ASoC: Intel: Skylake: Fix HDAudio and DMIC for v5.4 Cezary Rojewski
2020-11-29 11:41 ` Cezary Rojewski [this message]
2020-11-29 11:41 ` [PATCH 2/8] ASoC: Intel: Skylake: Select hda configuration permissively Cezary Rojewski
2020-11-29 11:41 ` [PATCH 3/8] ASoC: Intel: Skylake: Enable codec wakeup during chip init Cezary Rojewski
2020-11-29 11:41 ` [PATCH 4/8] ASoC: Intel: Skylake: Shield against no-NHLT configurations Cezary Rojewski
2020-11-29 11:41 ` [PATCH 5/8] ASoC: Intel: Allow for ROM init retry on CNL platforms Cezary Rojewski
2020-11-29 11:41 ` [PATCH 6/8] ASoC: Intel: Skylake: Await purge request ack on CNL Cezary Rojewski
2020-11-29 11:41 ` [PATCH 7/8] ASoC: Intel: Multiple I/O PCM format support for pipe Cezary Rojewski
2020-11-29 11:41 ` [PATCH 8/8] ASoC: Intel: Skylake: Automatic DMIC format configuration according to information from NHLT Cezary Rojewski
2020-12-01 8:43 ` [PATCH 0/8] ASoC: Intel: Skylake: Fix HDAudio and DMIC for v5.4 Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201129114148.13772-2-cezary.rojewski@intel.com \
--to=cezary.rojewski@intel.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mateusz.gorski@linux.intel.com \
--cc=pierre-louis.bossart@linux.intel.com \
--cc=stable@vger.kernel.org \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).