[PATCH 4.9 00/32] 4.9.250-rc1 review

[PATCH 4.9 00/32] 4.9.250-rc1 review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 4.9.250 release.
There are 32 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Sat, 09 Jan 2021 14:08:13 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.250-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 4.9.250-rc1

Jonathan Cameron <Jonathan.Cameron@huawei.com>
    iio:magnetometer:mag3110: Fix alignment and data leak issues.

Jonathan Cameron <Jonathan.Cameron@huawei.com>
    iio:imu:bmi160: Fix alignment and data leak issues

Jonathan Cameron <Jonathan.Cameron@huawei.com>
    iio:imu:bmi160: Fix too large a buffer.

sayli karnik <karniksayli1995@gmail.com>
    iio: bmi160_core: Fix sparse warning due to incorrect type in assignment

SeongJae Park <sjpark@amazon.de>
    xenbus/xenbus_backend: Disallow pending watch messages

SeongJae Park <sjpark@amazon.de>
    xen/xenbus: Count pending messages for each watch

SeongJae Park <sjpark@amazon.de>
    xen/xenbus/xen_bus_type: Support will_handle watch callback

SeongJae Park <sjpark@amazon.de>
    xen/xenbus: Add 'will_handle' callback support in xenbus_watch_path()

SeongJae Park <sjpark@amazon.de>
    xen/xenbus: Allow watches discard events before queueing

Josh Poimboeuf <jpoimboe@redhat.com>
    kdev_t: always inline major/minor helper functions

Jessica Yu <jeyu@kernel.org>
    module: delay kobject uevent until after module init call

Qinglang Miao <miaoqinglang@huawei.com>
    powerpc: sysdev: add missing iounmap() on error in mpic_msgr_probe()

Jan Kara <jack@suse.cz>
    quota: Don't overflow quota file offsets

Miroslav Benes <mbenes@suse.cz>
    module: set MODULE_STATE_GOING state when a module fails to load

Takashi Iwai <tiwai@suse.de>
    ALSA: seq: Use bool for snd_seq_queue internal flags

Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
    media: gp8psk: initialize stats at power control logic

Anant Thazhemadam <anant.thazhemadam@gmail.com>
    misc: vmw_vmci: fix kernel info-leak by initializing dbells in vmci_ctx_get_chkpt_doorbells()

Rustam Kovhaev <rkovhaev@gmail.com>
    reiserfs: add check for an invalid ih_entry_count

Johan Hovold <johan@kernel.org>
    of: fix linker-section match-table corruption

Petr Vorel <petr.vorel@gmail.com>
    uapi: move constants from <linux/kernel.h> to <linux/const.h>

Paolo Abeni <pabeni@redhat.com>
    l2tp: fix races with ipv4-mapped ipv6 addresses

Paolo Abeni <pabeni@redhat.com>
    net: ipv6: keep sk status consistent after datagram connect failure

Johan Hovold <johan@kernel.org>
    USB: serial: digi_acceleport: fix write-wakeup deadlocks

Stefan Haberland <sth@linux.ibm.com>
    s390/dasd: fix hanging device offline processing

Eric Auger <eric.auger@redhat.com>
    vfio/pci: Move dummy_resources_list init in vfio_pci_probe()

Kailang Yang <kailang@realtek.com>
    ALSA: hda/realtek - Dell headphone has noise on unmute for ALC236

Hui Wang <hui.wang@canonical.com>
    ALSA: hda - Fix a wrong FIXUP for alc289 on Dell machines

Kailang Yang <kailang@realtek.com>
    ALSA: hda/realtek - Support Dell headset mode for ALC3271

Johan Hovold <johan@kernel.org>
    ALSA: usb-audio: fix sync-ep altsetting sanity check

Alberto Aguirre <albaguirre@gmail.com>
    ALSA: usb-audio: simplify set_sync_ep_implicit_fb_quirk

Takashi Iwai <tiwai@suse.de>
    ALSA: hda/ca0132 - Fix work handling in delayed HP detection

Jan Beulich <JBeulich@suse.com>
    x86/entry/64: Add instruction suffix


-------------

Diffstat:

 Makefile                                  |  4 +--
 arch/powerpc/sysdev/mpic_msgr.c           |  2 +-
 arch/x86/entry/entry_64.S                 |  2 +-
 drivers/block/xen-blkback/xenbus.c        |  3 +-
 drivers/iio/imu/bmi160/bmi160_core.c      | 12 +++++--
 drivers/iio/magnetometer/mag3110.c        | 13 +++++---
 drivers/media/usb/dvb-usb/gp8psk.c        |  2 +-
 drivers/misc/vmw_vmci/vmci_context.c      |  2 +-
 drivers/net/xen-netback/xenbus.c          |  4 ++-
 drivers/s390/block/dasd_alias.c           | 10 +++++-
 drivers/usb/serial/digi_acceleport.c      | 45 ++++++++------------------
 drivers/vfio/pci/vfio_pci.c               |  4 +--
 drivers/xen/xen-pciback/xenbus.c          |  2 +-
 drivers/xen/xenbus/xenbus_client.c        |  8 ++++-
 drivers/xen/xenbus/xenbus_probe.c         |  1 +
 drivers/xen/xenbus/xenbus_probe.h         |  2 ++
 drivers/xen/xenbus/xenbus_probe_backend.c |  7 +++++
 drivers/xen/xenbus/xenbus_xs.c            | 38 ++++++++++++++--------
 fs/quota/quota_tree.c                     |  8 ++---
 fs/reiserfs/stree.c                       |  6 ++++
 include/linux/kdev_t.h                    | 22 ++++++-------
 include/linux/of.h                        |  1 +
 include/uapi/linux/const.h                |  5 +++
 include/uapi/linux/ethtool.h              |  2 +-
 include/uapi/linux/kernel.h               |  9 +-----
 include/uapi/linux/lightnvm.h             |  2 +-
 include/uapi/linux/mroute6.h              |  2 +-
 include/uapi/linux/netfilter/x_tables.h   |  2 +-
 include/uapi/linux/netlink.h              |  2 +-
 include/uapi/linux/sysctl.h               |  2 +-
 include/xen/xenbus.h                      | 15 ++++++++-
 kernel/module.c                           |  6 ++--
 net/ipv6/datagram.c                       | 21 ++++++++++---
 net/l2tp/l2tp_core.c                      | 38 +++++++++++-----------
 net/l2tp/l2tp_core.h                      |  3 --
 sound/core/seq/seq_queue.h                |  8 ++---
 sound/pci/hda/patch_ca0132.c              | 16 ++++++++--
 sound/pci/hda/patch_realtek.c             | 25 +++++++++++++--
 sound/usb/pcm.c                           | 52 ++++++++++++-------------------
 39 files changed, 242 insertions(+), 166 deletions(-)

[PATCH 4.9 01/32] x86/entry/64: Add instruction suffix

[Greg Kroah-Hartman]

From: Jan Beulich <JBeulich@suse.com>

commit a368d7fd2a3c6babb852fe974018dd97916bcd3b upstream.

Omitting suffixes from instructions in AT&T mode is bad practice when
operand size cannot be determined by the assembler from register
operands, and is likely going to be warned about by upstream gas in the
future (mine does already). Add the single missing suffix here.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/5A93F96902000078001ABAC8@prv-mh.provo.novell.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/entry/entry_64.S |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/x86/entry/entry_64.S
+++ b/arch/x86/entry/entry_64.S
@@ -58,7 +58,7 @@ ENDPROC(native_usergs_sysret64)
 
 .macro TRACE_IRQS_IRETQ
 #ifdef CONFIG_TRACE_IRQFLAGS
-	bt	$9, EFLAGS(%rsp)		/* interrupts off? */
+	btl	$9, EFLAGS(%rsp)		/* interrupts off? */
 	jnc	1f
 	TRACE_IRQS_ON
 1:

[PATCH 4.9 02/32] ALSA: hda/ca0132 - Fix work handling in delayed HP detection

[Greg Kroah-Hartman]

From: Takashi Iwai <tiwai@suse.de>

commit 42fb6b1d41eb5905d77c06cad2e87b70289bdb76 upstream

CA0132 has the delayed HP jack detection code that is invoked from the
unsol handler, but it does a few weird things: it contains the cancel
of a work inside the work handler, and yet it misses the cancel-sync
call at (runtime-)suspend.  This patch addresses those issues.

Fixes: 15c2b3cc09a3 ("ALSA: hda/ca0132 - Fix possible workqueue stall")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191213085111.22855-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
[sudip: adjust context]
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/pci/hda/patch_ca0132.c |   16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)

--- a/sound/pci/hda/patch_ca0132.c
+++ b/sound/pci/hda/patch_ca0132.c
@@ -4443,11 +4443,10 @@ static void hp_callback(struct hda_codec
 	/* Delay enabling the HP amp, to let the mic-detection
 	 * state machine run.
 	 */
-	cancel_delayed_work(&spec->unsol_hp_work);
-	schedule_delayed_work(&spec->unsol_hp_work, msecs_to_jiffies(500));
 	tbl = snd_hda_jack_tbl_get(codec, cb->nid);
 	if (tbl)
 		tbl->block_report = 1;
+	schedule_delayed_work(&spec->unsol_hp_work, msecs_to_jiffies(500));
 }
 
 static void amic_callback(struct hda_codec *codec, struct hda_jack_callback *cb)
@@ -4625,12 +4624,25 @@ static void ca0132_free(struct hda_codec
 	kfree(codec->spec);
 }
 
+#ifdef CONFIG_PM
+static int ca0132_suspend(struct hda_codec *codec)
+{
+	struct ca0132_spec *spec = codec->spec;
+
+	cancel_delayed_work_sync(&spec->unsol_hp_work);
+	return 0;
+}
+#endif
+
 static const struct hda_codec_ops ca0132_patch_ops = {
 	.build_controls = ca0132_build_controls,
 	.build_pcms = ca0132_build_pcms,
 	.init = ca0132_init,
 	.free = ca0132_free,
 	.unsol_event = snd_hda_jack_unsol_event,
+#ifdef CONFIG_PM
+	.suspend = ca0132_suspend,
+#endif
 };
 
 static void ca0132_config(struct hda_codec *codec)

[PATCH 4.9 03/32] ALSA: usb-audio: simplify set_sync_ep_implicit_fb_quirk

[Greg Kroah-Hartman]

From: Alberto Aguirre <albaguirre@gmail.com>

commit 103e9625647ad74d201e26fb74afcd8479142a37 upstream

Signed-off-by: Alberto Aguirre <albaguirre@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/usb/pcm.c |   52 ++++++++++++++++++++--------------------------------
 1 file changed, 20 insertions(+), 32 deletions(-)

--- a/sound/usb/pcm.c
+++ b/sound/usb/pcm.c
@@ -324,6 +324,7 @@ static int set_sync_ep_implicit_fb_quirk
 	struct usb_host_interface *alts;
 	struct usb_interface *iface;
 	unsigned int ep;
+	unsigned int ifnum;
 
 	/* Implicit feedback sync EPs consumers are always playback EPs */
 	if (subs->direction != SNDRV_PCM_STREAM_PLAYBACK)
@@ -334,44 +335,23 @@ static int set_sync_ep_implicit_fb_quirk
 	case USB_ID(0x0763, 0x2031): /* M-Audio Fast Track C600 */
 	case USB_ID(0x22f0, 0x0006): /* Allen&Heath Qu-16 */
 		ep = 0x81;
-		iface = usb_ifnum_to_if(dev, 3);
-
-		if (!iface || iface->num_altsetting == 0)
-			return -EINVAL;
-
-		alts = &iface->altsetting[1];
-		goto add_sync_ep;
-		break;
+		ifnum = 3;
+		goto add_sync_ep_from_ifnum;
 	case USB_ID(0x0763, 0x2080): /* M-Audio FastTrack Ultra */
 	case USB_ID(0x0763, 0x2081):
 		ep = 0x81;
-		iface = usb_ifnum_to_if(dev, 2);
-
-		if (!iface || iface->num_altsetting == 0)
-			return -EINVAL;
-
-		alts = &iface->altsetting[1];
-		goto add_sync_ep;
-	case USB_ID(0x2466, 0x8003):
+		ifnum = 2;
+		goto add_sync_ep_from_ifnum;
+	case USB_ID(0x2466, 0x8003): /* Fractal Audio Axe-Fx II */
 		ep = 0x86;
-		iface = usb_ifnum_to_if(dev, 2);
-
-		if (!iface || iface->num_altsetting == 0)
-			return -EINVAL;
-
-		alts = &iface->altsetting[1];
-		goto add_sync_ep;
-	case USB_ID(0x1397, 0x0002):
+		ifnum = 2;
+		goto add_sync_ep_from_ifnum;
+	case USB_ID(0x1397, 0x0002): /* Behringer UFX1204 */
 		ep = 0x81;
-		iface = usb_ifnum_to_if(dev, 1);
-
-		if (!iface || iface->num_altsetting == 0)
-			return -EINVAL;
-
-		alts = &iface->altsetting[1];
-		goto add_sync_ep;
-
+		ifnum = 1;
+		goto add_sync_ep_from_ifnum;
 	}
+
 	if (attr == USB_ENDPOINT_SYNC_ASYNC &&
 	    altsd->bInterfaceClass == USB_CLASS_VENDOR_SPEC &&
 	    altsd->bInterfaceProtocol == 2 &&
@@ -386,6 +366,14 @@ static int set_sync_ep_implicit_fb_quirk
 	/* No quirk */
 	return 0;
 
+add_sync_ep_from_ifnum:
+	iface = usb_ifnum_to_if(dev, ifnum);
+
+	if (!iface || iface->num_altsetting == 0)
+		return -EINVAL;
+
+	alts = &iface->altsetting[1];
+
 add_sync_ep:
 	subs->sync_endpoint = snd_usb_add_endpoint(subs->stream->chip,
 						   alts, ep, !subs->direction,

[PATCH 4.9 04/32] ALSA: usb-audio: fix sync-ep altsetting sanity check

[Greg Kroah-Hartman]

From: Johan Hovold <johan@kernel.org>

commit 5d1b71226dc4d44b4b65766fa9d74492f9d4587b upstream

The altsetting sanity check in set_sync_ep_implicit_fb_quirk() was
checking for there to be at least one altsetting but then went on to
access the second one, which may not exist.

This could lead to random slab data being used to initialise the sync
endpoint in snd_usb_add_endpoint().

Fixes: c75a8a7ae565 ("ALSA: snd-usb: add support for implicit feedback")
Fixes: ca10a7ebdff1 ("ALSA: usb-audio: FT C400 sync playback EP to capture EP")
Fixes: 5e35dc0338d8 ("ALSA: usb-audio: add implicit fb quirk for Behringer UFX1204")
Fixes: 17f08b0d9aaf ("ALSA: usb-audio: add implicit fb quirk for Axe-Fx II")
Fixes: 103e9625647a ("ALSA: usb-audio: simplify set_sync_ep_implicit_fb_quirk")
Cc: stable <stable@vger.kernel.org>     # 3.5
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20200114083953.1106-1-johan@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/usb/pcm.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/sound/usb/pcm.c
+++ b/sound/usb/pcm.c
@@ -369,7 +369,7 @@ static int set_sync_ep_implicit_fb_quirk
 add_sync_ep_from_ifnum:
 	iface = usb_ifnum_to_if(dev, ifnum);
 
-	if (!iface || iface->num_altsetting == 0)
+	if (!iface || iface->num_altsetting < 2)
 		return -EINVAL;
 
 	alts = &iface->altsetting[1];

[PATCH 4.9 05/32] ALSA: hda/realtek - Support Dell headset mode for ALC3271

[Greg Kroah-Hartman]

From: Kailang Yang <kailang@realtek.com>

commit fcc6c877a01f83cbce1cca885ea62df6a10d33c3 upstream

Add DELL4_MIC_NO_PRESENCE model.
Add the pin configuration value of this machine into the pin_quirk
table to make DELL4_MIC_NO_PRESENCE apply to this machine.

Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/pci/hda/patch_realtek.c |   16 ++++++++++++++++
 1 file changed, 16 insertions(+)

--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -4896,6 +4896,7 @@ enum {
 	ALC269_FIXUP_DELL1_MIC_NO_PRESENCE,
 	ALC269_FIXUP_DELL2_MIC_NO_PRESENCE,
 	ALC269_FIXUP_DELL3_MIC_NO_PRESENCE,
+	ALC269_FIXUP_DELL4_MIC_NO_PRESENCE,
 	ALC269_FIXUP_HEADSET_MODE,
 	ALC269_FIXUP_HEADSET_MODE_NO_HP_MIC,
 	ALC269_FIXUP_ASPIRE_HEADSET_MIC,
@@ -5199,6 +5200,16 @@ static const struct hda_fixup alc269_fix
 		.chained = true,
 		.chain_id = ALC269_FIXUP_HEADSET_MODE_NO_HP_MIC
 	},
+	[ALC269_FIXUP_DELL4_MIC_NO_PRESENCE] = {
+		.type = HDA_FIXUP_PINS,
+		.v.pins = (const struct hda_pintbl[]) {
+			{ 0x19, 0x01a1913c }, /* use as headset mic, without its own jack detect */
+			{ 0x1b, 0x01a1913d }, /* use as headphone mic, without its own jack detect */
+			{ }
+		},
+		.chained = true,
+		.chain_id = ALC269_FIXUP_HEADSET_MODE
+	},
 	[ALC269_FIXUP_HEADSET_MODE] = {
 		.type = HDA_FIXUP_FUNC,
 		.v.func = alc_fixup_headset_mode,
@@ -6267,6 +6278,11 @@ static const struct snd_hda_pin_quirk al
 		{0x17, 0x90170110},
 		{0x1a, 0x03011020},
 		{0x21, 0x03211030}),
+	SND_HDA_PIN_QUIRK(0x10ec0299, 0x1028, "Dell", ALC269_FIXUP_DELL4_MIC_NO_PRESENCE,
+		ALC225_STANDARD_PINS,
+		{0x12, 0xb7a60130},
+		{0x13, 0xb8a60140},
+		{0x17, 0x90170110}),
 	{}
 };
 

[PATCH 4.9 06/32] ALSA: hda - Fix a wrong FIXUP for alc289 on Dell machines

[Greg Kroah-Hartman]

From: Hui Wang <hui.wang@canonical.com>

commit d5078193e56bb24f4593f00102a3b5e07bb84ee0 upstream

With the alc289, the Pin 0x1b is Headphone-Mic, so we should assign
ALC269_FIXUP_DELL4_MIC_NO_PRESENCE rather than
ALC225_FIXUP_DELL1_MIC_NO_PRESENCE to it. And this change is suggested
by Kailang of Realtek and is verified on the machine.

Fixes: 3f2f7c553d07 ("ALSA: hda - Fix headset mic detection problem for two Dell machines")
Cc: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/pci/hda/patch_realtek.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -6194,7 +6194,7 @@ static const struct snd_hda_pin_quirk al
 		{0x12, 0x90a60120},
 		{0x14, 0x90170110},
 		{0x21, 0x0321101f}),
-	SND_HDA_PIN_QUIRK(0x10ec0289, 0x1028, "Dell", ALC225_FIXUP_DELL1_MIC_NO_PRESENCE,
+	SND_HDA_PIN_QUIRK(0x10ec0289, 0x1028, "Dell", ALC269_FIXUP_DELL4_MIC_NO_PRESENCE,
 		{0x12, 0xb7a60130},
 		{0x14, 0x90170110},
 		{0x21, 0x04211020}),

[PATCH 4.9 07/32] ALSA: hda/realtek - Dell headphone has noise on unmute for ALC236

[Greg Kroah-Hartman]

From: Kailang Yang <kailang@realtek.com>

commit e1e8c1fdce8b00fce08784d9d738c60ebf598ebc upstream

headphone have noise even the volume is very small.
Let it fill up pcbeep hidden register to default value.
The issue was gone.

Fixes: 4344aec84bd8 ("ALSA: hda/realtek - New codec support for ALC256")
Fixes: 736f20a70608 ("ALSA: hda/realtek - Add support for ALC236/ALC3204")
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/9ae47f23a64d4e41a9c81e263cd8a250@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
[sudip: adjust context]
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/pci/hda/patch_realtek.c |    7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -330,9 +330,7 @@ static void alc_fill_eapd_coef(struct hd
 	case 0x10ec0225:
 	case 0x10ec0233:
 	case 0x10ec0235:
-	case 0x10ec0236:
 	case 0x10ec0255:
-	case 0x10ec0256:
 	case 0x10ec0257:
 	case 0x10ec0282:
 	case 0x10ec0283:
@@ -343,6 +341,11 @@ static void alc_fill_eapd_coef(struct hd
 	case 0x10ec0299:
 		alc_update_coef_idx(codec, 0x10, 1<<9, 0);
 		break;
+	case 0x10ec0236:
+	case 0x10ec0256:
+		alc_write_coef_idx(codec, 0x36, 0x5757);
+		alc_update_coef_idx(codec, 0x10, 1<<9, 0);
+		break;
 	case 0x10ec0285:
 	case 0x10ec0293:
 		alc_update_coef_idx(codec, 0xa, 1<<13, 0);

[PATCH 4.9 08/32] vfio/pci: Move dummy_resources_list init in vfio_pci_probe()

[Greg Kroah-Hartman]

From: Eric Auger <eric.auger@redhat.com>

[ Upstream commit 16b8fe4caf499ae8e12d2ab1b1324497e36a7b83 ]

In case an error occurs in vfio_pci_enable() before the call to
vfio_pci_probe_mmaps(), vfio_pci_disable() will  try to iterate
on an uninitialized list and cause a kernel panic.

Lets move to the initialization to vfio_pci_probe() to fix the
issue.

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Fixes: 05f0c03fbac1 ("vfio-pci: Allow to mmap sub-page MMIO BARs if the mmio page is exclusive")
CC: Stable <stable@vger.kernel.org> # v4.7+
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/vfio/pci/vfio_pci.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/vfio/pci/vfio_pci.c b/drivers/vfio/pci/vfio_pci.c
index f9a3da02c631b..62fa5340c9652 100644
--- a/drivers/vfio/pci/vfio_pci.c
+++ b/drivers/vfio/pci/vfio_pci.c
@@ -118,8 +118,6 @@ static void vfio_pci_probe_mmaps(struct vfio_pci_device *vdev)
 	int bar;
 	struct vfio_pci_dummy_resource *dummy_res;
 
-	INIT_LIST_HEAD(&vdev->dummy_resources_list);
-
 	for (bar = PCI_STD_RESOURCES; bar <= PCI_STD_RESOURCE_END; bar++) {
 		res = vdev->pdev->resource + bar;
 
@@ -1547,7 +1545,7 @@ static int vfio_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	vdev->irq_type = VFIO_PCI_NUM_IRQS;
 	mutex_init(&vdev->igate);
 	spin_lock_init(&vdev->irqlock);
-
+	INIT_LIST_HEAD(&vdev->dummy_resources_list);
 	mutex_init(&vdev->vma_lock);
 	INIT_LIST_HEAD(&vdev->vma_list);
 	init_rwsem(&vdev->memory_lock);
-- 
2.27.0

[PATCH 4.9 09/32] s390/dasd: fix hanging device offline processing

[Greg Kroah-Hartman]

From: Stefan Haberland <sth@linux.ibm.com>

[ Upstream commit 658a337a606f48b7ebe451591f7681d383fa115e ]

For an LCU update a read unit address configuration IO is required.
This is started using sleep_on(), which has early exit paths in case the
device is not usable for IO. For example when it is in offline processing.

In those cases the LCU update should fail and not be retried.
Therefore lcu_update_work checks if EOPNOTSUPP is returned or not.

Commit 41995342b40c ("s390/dasd: fix endless loop after read unit address configuration")
accidentally removed the EOPNOTSUPP return code from
read_unit_address_configuration(), which in turn might lead to an endless
loop of the LCU update in offline processing.

Fix by returning EOPNOTSUPP again if the device is not able to perform the
request.

Fixes: 41995342b40c ("s390/dasd: fix endless loop after read unit address configuration")
Cc: stable@vger.kernel.org #5.3
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/s390/block/dasd_alias.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/drivers/s390/block/dasd_alias.c b/drivers/s390/block/dasd_alias.c
index 0569c15fddfe4..2002684a68b3c 100644
--- a/drivers/s390/block/dasd_alias.c
+++ b/drivers/s390/block/dasd_alias.c
@@ -461,11 +461,19 @@ static int read_unit_address_configuration(struct dasd_device *device,
 	spin_unlock_irqrestore(&lcu->lock, flags);
 
 	rc = dasd_sleep_on(cqr);
-	if (rc && !suborder_not_supported(cqr)) {
+	if (!rc)
+		goto out;
+
+	if (suborder_not_supported(cqr)) {
+		/* suborder not supported or device unusable for IO */
+		rc = -EOPNOTSUPP;
+	} else {
+		/* IO failed but should be retried */
 		spin_lock_irqsave(&lcu->lock, flags);
 		lcu->flags |= NEED_UAC_UPDATE;
 		spin_unlock_irqrestore(&lcu->lock, flags);
 	}
+out:
 	dasd_kfree_request(cqr, cqr->memdev);
 	return rc;
 }
-- 
2.27.0

[PATCH 4.9 10/32] USB: serial: digi_acceleport: fix write-wakeup deadlocks

[Greg Kroah-Hartman]

From: Johan Hovold <johan@kernel.org>

[ Upstream commit 5098e77962e7c8947f87bd8c5869c83e000a522a ]

The driver must not call tty_wakeup() while holding its private lock as
line disciplines are allowed to call back into write() from
write_wakeup(), leading to a deadlock.

Also remove the unneeded work struct that was used to defer wakeup in
order to work around a possible race in ancient times (see comment about
n_tty write_chan() in commit 14b54e39b412 ("USB: serial: remove
changelogs and old todo entries")).

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/digi_acceleport.c |   45 ++++++++++-------------------------
 1 file changed, 13 insertions(+), 32 deletions(-)

--- a/drivers/usb/serial/digi_acceleport.c
+++ b/drivers/usb/serial/digi_acceleport.c
@@ -23,7 +23,6 @@
 #include <linux/tty_flip.h>
 #include <linux/module.h>
 #include <linux/spinlock.h>
-#include <linux/workqueue.h>
 #include <linux/uaccess.h>
 #include <linux/usb.h>
 #include <linux/wait.h>
@@ -201,14 +200,12 @@ struct digi_port {
 	int dp_throttle_restart;
 	wait_queue_head_t dp_flush_wait;
 	wait_queue_head_t dp_close_wait;	/* wait queue for close */
-	struct work_struct dp_wakeup_work;
 	struct usb_serial_port *dp_port;
 };
 
 
 /* Local Function Declarations */
 
-static void digi_wakeup_write_lock(struct work_struct *work);
 static int digi_write_oob_command(struct usb_serial_port *port,
 	unsigned char *buf, int count, int interruptible);
 static int digi_write_inb_command(struct usb_serial_port *port,
@@ -355,26 +352,6 @@ __releases(lock)
 	return timeout;
 }
 
-
-/*
- *  Digi Wakeup Write
- *
- *  Wake up port, line discipline, and tty processes sleeping
- *  on writes.
- */
-
-static void digi_wakeup_write_lock(struct work_struct *work)
-{
-	struct digi_port *priv =
-			container_of(work, struct digi_port, dp_wakeup_work);
-	struct usb_serial_port *port = priv->dp_port;
-	unsigned long flags;
-
-	spin_lock_irqsave(&priv->dp_port_lock, flags);
-	tty_port_tty_wakeup(&port->port);
-	spin_unlock_irqrestore(&priv->dp_port_lock, flags);
-}
-
 /*
  *  Digi Write OOB Command
  *
@@ -985,6 +962,7 @@ static void digi_write_bulk_callback(str
 	struct digi_serial *serial_priv;
 	int ret = 0;
 	int status = urb->status;
+	bool wakeup;
 
 	/* port and serial sanity check */
 	if (port == NULL || (priv = usb_get_serial_port_data(port)) == NULL) {
@@ -1011,6 +989,7 @@ static void digi_write_bulk_callback(str
 	}
 
 	/* try to send any buffered data on this port */
+	wakeup = true;
 	spin_lock(&priv->dp_port_lock);
 	priv->dp_write_urb_in_use = 0;
 	if (priv->dp_out_buf_len > 0) {
@@ -1026,19 +1005,18 @@ static void digi_write_bulk_callback(str
 		if (ret == 0) {
 			priv->dp_write_urb_in_use = 1;
 			priv->dp_out_buf_len = 0;
+			wakeup = false;
 		}
 	}
-	/* wake up processes sleeping on writes immediately */
-	tty_port_tty_wakeup(&port->port);
-	/* also queue up a wakeup at scheduler time, in case we */
-	/* lost the race in write_chan(). */
-	schedule_work(&priv->dp_wakeup_work);
-
 	spin_unlock(&priv->dp_port_lock);
+
 	if (ret && ret != -EPERM)
 		dev_err_console(port,
 			"%s: usb_submit_urb failed, ret=%d, port=%d\n",
 			__func__, ret, priv->dp_port_num);
+
+	if (wakeup)
+		tty_port_tty_wakeup(&port->port);
 }
 
 static int digi_write_room(struct tty_struct *tty)
@@ -1238,7 +1216,6 @@ static int digi_port_init(struct usb_ser
 	init_waitqueue_head(&priv->dp_transmit_idle_wait);
 	init_waitqueue_head(&priv->dp_flush_wait);
 	init_waitqueue_head(&priv->dp_close_wait);
-	INIT_WORK(&priv->dp_wakeup_work, digi_wakeup_write_lock);
 	priv->dp_port = port;
 
 	init_waitqueue_head(&port->write_wait);
@@ -1524,13 +1501,14 @@ static int digi_read_oob_callback(struct
 			rts = C_CRTSCTS(tty);
 
 		if (tty && opcode == DIGI_CMD_READ_INPUT_SIGNALS) {
+			bool wakeup = false;
+
 			spin_lock(&priv->dp_port_lock);
 			/* convert from digi flags to termiox flags */
 			if (val & DIGI_READ_INPUT_SIGNALS_CTS) {
 				priv->dp_modem_signals |= TIOCM_CTS;
-				/* port must be open to use tty struct */
 				if (rts)
-					tty_port_tty_wakeup(&port->port);
+					wakeup = true;
 			} else {
 				priv->dp_modem_signals &= ~TIOCM_CTS;
 				/* port must be open to use tty struct */
@@ -1549,6 +1527,9 @@ static int digi_read_oob_callback(struct
 				priv->dp_modem_signals &= ~TIOCM_CD;
 
 			spin_unlock(&priv->dp_port_lock);
+
+			if (wakeup)
+				tty_port_tty_wakeup(&port->port);
 		} else if (opcode == DIGI_CMD_TRANSMIT_IDLE) {
 			spin_lock(&priv->dp_port_lock);
 			priv->dp_transmit_idle = 1;

[PATCH 4.9 11/32] net: ipv6: keep sk status consistent after datagram connect failure

[Greg Kroah-Hartman]

From: Paolo Abeni <pabeni@redhat.com>

commit 2f987a76a97773beafbc615b9c4d8fe79129a7f4 upstream.

On unsuccesful ip6_datagram_connect(), if the failure is caused by
ip6_datagram_dst_update(), the sk peer information are cleared, but
the sk->sk_state is preserved.

If the socket was already in an established status, the overall sk
status is inconsistent and fouls later checks in datagram code.

Fix this saving the old peer information and restoring them in
case of failure. This also aligns ipv6 datagram connect() behavior
with ipv4.

v1 -> v2:
 - added missing Fixes tag

Fixes: 85cb73ff9b74 ("net: ipv6: reset daddr and dport in sk if connect() fails")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/ipv6/datagram.c |   21 +++++++++++++++++----
 1 file changed, 17 insertions(+), 4 deletions(-)

--- a/net/ipv6/datagram.c
+++ b/net/ipv6/datagram.c
@@ -145,10 +145,12 @@ int __ip6_datagram_connect(struct sock *
 	struct sockaddr_in6	*usin = (struct sockaddr_in6 *) uaddr;
 	struct inet_sock	*inet = inet_sk(sk);
 	struct ipv6_pinfo	*np = inet6_sk(sk);
-	struct in6_addr		*daddr;
+	struct in6_addr		*daddr, old_daddr;
+	__be32			fl6_flowlabel = 0;
+	__be32			old_fl6_flowlabel;
+	__be32			old_dport;
 	int			addr_type;
 	int			err;
-	__be32			fl6_flowlabel = 0;
 
 	if (usin->sin6_family == AF_INET) {
 		if (__ipv6_only_sock(sk))
@@ -238,9 +240,13 @@ ipv4_connected:
 		}
 	}
 
+	/* save the current peer information before updating it */
+	old_daddr = sk->sk_v6_daddr;
+	old_fl6_flowlabel = np->flow_label;
+	old_dport = inet->inet_dport;
+
 	sk->sk_v6_daddr = *daddr;
 	np->flow_label = fl6_flowlabel;
-
 	inet->inet_dport = usin->sin6_port;
 
 	/*
@@ -249,8 +255,15 @@ ipv4_connected:
 	 */
 
 	err = ip6_datagram_dst_update(sk, true);
-	if (err)
+	if (err) {
+		/* Restore the socket peer info, to keep it consistent with
+		 * the old socket state
+		 */
+		sk->sk_v6_daddr = old_daddr;
+		np->flow_label = old_fl6_flowlabel;
+		inet->inet_dport = old_dport;
 		goto out;
+	}
 
 	sk->sk_state = TCP_ESTABLISHED;
 	sk_set_txhash(sk);

[PATCH 4.9 12/32] l2tp: fix races with ipv4-mapped ipv6 addresses

[Greg Kroah-Hartman]

From: Paolo Abeni <pabeni@redhat.com>

commit b954f94023dcc61388c8384f0f14eb8e42c863c5 upstream.

The l2tp_tunnel_create() function checks for v4mapped ipv6
sockets and cache that flag, so that l2tp core code can
reusing it at xmit time.

If the socket is provided by the userspace, the connection
status of the tunnel sockets can change between the tunnel
creation and the xmit call, so that syzbot is able to
trigger the following splat:

BUG: KASAN: use-after-free in ip6_dst_idev include/net/ip6_fib.h:192
[inline]
BUG: KASAN: use-after-free in ip6_xmit+0x1f76/0x2260
net/ipv6/ip6_output.c:264
Read of size 8 at addr ffff8801bd949318 by task syz-executor4/23448

CPU: 0 PID: 23448 Comm: syz-executor4 Not tainted 4.16.0-rc4+ #65
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Call Trace:
  __dump_stack lib/dump_stack.c:17 [inline]
  dump_stack+0x194/0x24d lib/dump_stack.c:53
  print_address_description+0x73/0x250 mm/kasan/report.c:256
  kasan_report_error mm/kasan/report.c:354 [inline]
  kasan_report+0x23c/0x360 mm/kasan/report.c:412
  __asan_report_load8_noabort+0x14/0x20 mm/kasan/report.c:433
  ip6_dst_idev include/net/ip6_fib.h:192 [inline]
  ip6_xmit+0x1f76/0x2260 net/ipv6/ip6_output.c:264
  inet6_csk_xmit+0x2fc/0x580 net/ipv6/inet6_connection_sock.c:139
  l2tp_xmit_core net/l2tp/l2tp_core.c:1053 [inline]
  l2tp_xmit_skb+0x105f/0x1410 net/l2tp/l2tp_core.c:1148
  pppol2tp_sendmsg+0x470/0x670 net/l2tp/l2tp_ppp.c:341
  sock_sendmsg_nosec net/socket.c:630 [inline]
  sock_sendmsg+0xca/0x110 net/socket.c:640
  ___sys_sendmsg+0x767/0x8b0 net/socket.c:2046
  __sys_sendmsg+0xe5/0x210 net/socket.c:2080
  SYSC_sendmsg net/socket.c:2091 [inline]
  SyS_sendmsg+0x2d/0x50 net/socket.c:2087
  do_syscall_64+0x281/0x940 arch/x86/entry/common.c:287
  entry_SYSCALL_64_after_hwframe+0x42/0xb7
RIP: 0033:0x453e69
RSP: 002b:00007f819593cc68 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007f819593d6d4 RCX: 0000000000453e69
RDX: 0000000000000081 RSI: 000000002037ffc8 RDI: 0000000000000004
RBP: 000000000072bea0 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff
R13: 00000000000004c3 R14: 00000000006f72e8 R15: 0000000000000000

This change addresses the issues:
* explicitly checking for TCP_ESTABLISHED for user space provided sockets
* dropping the v4mapped flag usage - it can become outdated - and
  explicitly invoking ipv6_addr_v4mapped() instead

The issue is apparently there since ancient times.

v1 -> v2: (many thanks to Guillaume)
 - with csum issue introduced in v1
 - replace pr_err with pr_debug
 - fix build issue with IPV6 disabled
 - move l2tp_sk_is_v4mapped in l2tp_core.c

v2 -> v3:
 - don't update inet_daddr for v4mapped address, unneeded
 - drop rendundant check at creation time

Reported-and-tested-by: syzbot+92fa328176eb07e4ac1a@syzkaller.appspotmail.com
Fixes: 3557baabf280 ("[L2TP]: PPP over L2TP driver core")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>


---
 net/l2tp/l2tp_core.c |   38 ++++++++++++++++++--------------------
 net/l2tp/l2tp_core.h |    3 ---
 2 files changed, 18 insertions(+), 23 deletions(-)

--- a/net/l2tp/l2tp_core.c
+++ b/net/l2tp/l2tp_core.c
@@ -112,6 +112,13 @@ struct l2tp_net {
 	spinlock_t l2tp_session_hlist_lock;
 };
 
+#if IS_ENABLED(CONFIG_IPV6)
+static bool l2tp_sk_is_v6(struct sock *sk)
+{
+	return sk->sk_family == PF_INET6 &&
+	       !ipv6_addr_v4mapped(&sk->sk_v6_daddr);
+}
+#endif
 
 static inline struct l2tp_tunnel *l2tp_tunnel(struct sock *sk)
 {
@@ -1136,7 +1143,7 @@ static int l2tp_xmit_core(struct l2tp_se
 	skb->ignore_df = 1;
 	skb_dst_drop(skb);
 #if IS_ENABLED(CONFIG_IPV6)
-	if (tunnel->sock->sk_family == PF_INET6 && !tunnel->v4mapped)
+	if (l2tp_sk_is_v6(tunnel->sock))
 		error = inet6_csk_xmit(tunnel->sock, skb, NULL);
 	else
 #endif
@@ -1199,6 +1206,15 @@ int l2tp_xmit_skb(struct l2tp_session *s
 		goto out_unlock;
 	}
 
+	/* The user-space may change the connection status for the user-space
+	 * provided socket at run time: we must check it under the socket lock
+	 */
+	if (tunnel->fd >= 0 && sk->sk_state != TCP_ESTABLISHED) {
+		kfree_skb(skb);
+		ret = NET_XMIT_DROP;
+		goto out_unlock;
+	}
+
 	inet = inet_sk(sk);
 	fl = &inet->cork.fl;
 	switch (tunnel->encap) {
@@ -1214,7 +1230,7 @@ int l2tp_xmit_skb(struct l2tp_session *s
 
 		/* Calculate UDP checksum if configured to do so */
 #if IS_ENABLED(CONFIG_IPV6)
-		if (sk->sk_family == PF_INET6 && !tunnel->v4mapped)
+		if (l2tp_sk_is_v6(sk))
 			udp6_set_csum(udp_get_no_check6_tx(sk),
 				      skb, &inet6_sk(sk)->saddr,
 				      &sk->sk_v6_daddr, udp_len);
@@ -1620,24 +1636,6 @@ int l2tp_tunnel_create(struct net *net,
 	if (cfg != NULL)
 		tunnel->debug = cfg->debug;
 
-#if IS_ENABLED(CONFIG_IPV6)
-	if (sk->sk_family == PF_INET6) {
-		struct ipv6_pinfo *np = inet6_sk(sk);
-
-		if (ipv6_addr_v4mapped(&np->saddr) &&
-		    ipv6_addr_v4mapped(&sk->sk_v6_daddr)) {
-			struct inet_sock *inet = inet_sk(sk);
-
-			tunnel->v4mapped = true;
-			inet->inet_saddr = np->saddr.s6_addr32[3];
-			inet->inet_rcv_saddr = sk->sk_v6_rcv_saddr.s6_addr32[3];
-			inet->inet_daddr = sk->sk_v6_daddr.s6_addr32[3];
-		} else {
-			tunnel->v4mapped = false;
-		}
-	}
-#endif
-
 	/* Mark socket as an encapsulation socket. See net/ipv4/udp.c */
 	tunnel->encap = encap;
 	if (encap == L2TP_ENCAPTYPE_UDP) {
--- a/net/l2tp/l2tp_core.h
+++ b/net/l2tp/l2tp_core.h
@@ -191,9 +191,6 @@ struct l2tp_tunnel {
 	struct sock		*sock;		/* Parent socket */
 	int			fd;		/* Parent fd, if tunnel socket
 						 * was created by userspace */
-#if IS_ENABLED(CONFIG_IPV6)
-	bool			v4mapped;
-#endif
 
 	struct work_struct	del_work;
 

[PATCH 4.9 13/32] uapi: move constants from <linux/kernel.h> to <linux/const.h>

[Greg Kroah-Hartman]

From: Petr Vorel <petr.vorel@gmail.com>

commit a85cbe6159ffc973e5702f70a3bd5185f8f3c38d upstream.

and include <linux/const.h> in UAPI headers instead of <linux/kernel.h>.

The reason is to avoid indirect <linux/sysinfo.h> include when using
some network headers: <linux/netlink.h> or others -> <linux/kernel.h>
-> <linux/sysinfo.h>.

This indirect include causes on MUSL redefinition of struct sysinfo when
included both <sys/sysinfo.h> and some of UAPI headers:

    In file included from x86_64-buildroot-linux-musl/sysroot/usr/include/linux/kernel.h:5,
                     from x86_64-buildroot-linux-musl/sysroot/usr/include/linux/netlink.h:5,
                     from ../include/tst_netlink.h:14,
                     from tst_crypto.c:13:
    x86_64-buildroot-linux-musl/sysroot/usr/include/linux/sysinfo.h:8:8: error: redefinition of `struct sysinfo'
     struct sysinfo {
            ^~~~~~~
    In file included from ../include/tst_safe_macros.h:15,
                     from ../include/tst_test.h:93,
                     from tst_crypto.c:11:
    x86_64-buildroot-linux-musl/sysroot/usr/include/sys/sysinfo.h:10:8: note: originally defined here

Link: https://lkml.kernel.org/r/20201015190013.8901-1-petr.vorel@gmail.com
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Suggested-by: Rich Felker <dalias@aerifal.cx>
Acked-by: Rich Felker <dalias@libc.org>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Baruch Siach <baruch@tkos.co.il>
Cc: Florian Weimer <fweimer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 include/uapi/linux/const.h              |    5 +++++
 include/uapi/linux/ethtool.h            |    2 +-
 include/uapi/linux/kernel.h             |    9 +--------
 include/uapi/linux/lightnvm.h           |    2 +-
 include/uapi/linux/mroute6.h            |    2 +-
 include/uapi/linux/netfilter/x_tables.h |    2 +-
 include/uapi/linux/netlink.h            |    2 +-
 include/uapi/linux/sysctl.h             |    2 +-
 8 files changed, 12 insertions(+), 14 deletions(-)

--- a/include/uapi/linux/const.h
+++ b/include/uapi/linux/const.h
@@ -24,4 +24,9 @@
 #define _BITUL(x)	(_AC(1,UL) << (x))
 #define _BITULL(x)	(_AC(1,ULL) << (x))
 
+#define __ALIGN_KERNEL(x, a)		__ALIGN_KERNEL_MASK(x, (typeof(x))(a) - 1)
+#define __ALIGN_KERNEL_MASK(x, mask)	(((x) + (mask)) & ~(mask))
+
+#define __KERNEL_DIV_ROUND_UP(n, d) (((n) + (d) - 1) / (d))
+
 #endif /* !(_LINUX_CONST_H) */
--- a/include/uapi/linux/ethtool.h
+++ b/include/uapi/linux/ethtool.h
@@ -13,7 +13,7 @@
 #ifndef _UAPI_LINUX_ETHTOOL_H
 #define _UAPI_LINUX_ETHTOOL_H
 
-#include <linux/kernel.h>
+#include <linux/const.h>
 #include <linux/types.h>
 #include <linux/if_ether.h>
 
--- a/include/uapi/linux/kernel.h
+++ b/include/uapi/linux/kernel.h
@@ -2,13 +2,6 @@
 #define _UAPI_LINUX_KERNEL_H
 
 #include <linux/sysinfo.h>
-
-/*
- * 'kernel.h' contains some often-used function prototypes etc
- */
-#define __ALIGN_KERNEL(x, a)		__ALIGN_KERNEL_MASK(x, (typeof(x))(a) - 1)
-#define __ALIGN_KERNEL_MASK(x, mask)	(((x) + (mask)) & ~(mask))
-
-#define __KERNEL_DIV_ROUND_UP(n, d) (((n) + (d) - 1) / (d))
+#include <linux/const.h>
 
 #endif /* _UAPI_LINUX_KERNEL_H */
--- a/include/uapi/linux/lightnvm.h
+++ b/include/uapi/linux/lightnvm.h
@@ -20,7 +20,7 @@
 #define _UAPI_LINUX_LIGHTNVM_H
 
 #ifdef __KERNEL__
-#include <linux/kernel.h>
+#include <linux/const.h>
 #include <linux/ioctl.h>
 #else /* __KERNEL__ */
 #include <stdio.h>
--- a/include/uapi/linux/mroute6.h
+++ b/include/uapi/linux/mroute6.h
@@ -1,7 +1,7 @@
 #ifndef _UAPI__LINUX_MROUTE6_H
 #define _UAPI__LINUX_MROUTE6_H
 
-#include <linux/kernel.h>
+#include <linux/const.h>
 #include <linux/types.h>
 #include <linux/sockios.h>
 #include <linux/in6.h>		/* For struct sockaddr_in6. */
--- a/include/uapi/linux/netfilter/x_tables.h
+++ b/include/uapi/linux/netfilter/x_tables.h
@@ -1,6 +1,6 @@
 #ifndef _UAPI_X_TABLES_H
 #define _UAPI_X_TABLES_H
-#include <linux/kernel.h>
+#include <linux/const.h>
 #include <linux/types.h>
 
 #define XT_FUNCTION_MAXNAMELEN 30
--- a/include/uapi/linux/netlink.h
+++ b/include/uapi/linux/netlink.h
@@ -1,7 +1,7 @@
 #ifndef _UAPI__LINUX_NETLINK_H
 #define _UAPI__LINUX_NETLINK_H
 
-#include <linux/kernel.h>
+#include <linux/const.h>
 #include <linux/socket.h> /* for __kernel_sa_family_t */
 #include <linux/types.h>
 
--- a/include/uapi/linux/sysctl.h
+++ b/include/uapi/linux/sysctl.h
@@ -22,7 +22,7 @@
 #ifndef _UAPI_LINUX_SYSCTL_H
 #define _UAPI_LINUX_SYSCTL_H
 
-#include <linux/kernel.h>
+#include <linux/const.h>
 #include <linux/types.h>
 #include <linux/compiler.h>
 

[PATCH 4.9 14/32] of: fix linker-section match-table corruption

[Greg Kroah-Hartman]

From: Johan Hovold <johan@kernel.org>

commit 5812b32e01c6d86ba7a84110702b46d8a8531fe9 upstream.

Specify type alignment when declaring linker-section match-table entries
to prevent gcc from increasing alignment and corrupting the various
tables with padding (e.g. timers, irqchips, clocks, reserved memory).

This is specifically needed on x86 where gcc (typically) aligns larger
objects like struct of_device_id with static extent on 32-byte
boundaries which at best prevents matching on anything but the first
entry. Specifying alignment when declaring variables suppresses this
optimisation.

Here's a 64-bit example where all entries are corrupt as 16 bytes of
padding has been inserted before the first entry:

	ffffffff8266b4b0 D __clk_of_table
	ffffffff8266b4c0 d __of_table_fixed_factor_clk
	ffffffff8266b5a0 d __of_table_fixed_clk
	ffffffff8266b680 d __clk_of_table_sentinel

And here's a 32-bit example where the 8-byte-aligned table happens to be
placed on a 32-byte boundary so that all but the first entry are corrupt
due to the 28 bytes of padding inserted between entries:

	812b3ec0 D __irqchip_of_table
	812b3ec0 d __of_table_irqchip1
	812b3fa0 d __of_table_irqchip2
	812b4080 d __of_table_irqchip3
	812b4160 d irqchip_of_match_end

Verified on x86 using gcc-9.3 and gcc-4.9 (which uses 64-byte
alignment), and on arm using gcc-7.2.

Note that there are no in-tree users of these tables on x86 currently
(even if they are included in the image).

Fixes: 54196ccbe0ba ("of: consolidate linker section OF match table declarations")
Fixes: f6e916b82022 ("irqchip: add basic infrastructure")
Cc: stable <stable@vger.kernel.org>     # 3.9
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20201123102319.8090-2-johan@kernel.org
[ johan: adjust context to 5.4 ]
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 include/linux/of.h |    1 +
 1 file changed, 1 insertion(+)

--- a/include/linux/of.h
+++ b/include/linux/of.h
@@ -1132,6 +1132,7 @@ static inline int of_get_available_child
 #define _OF_DECLARE(table, name, compat, fn, fn_type)			\
 	static const struct of_device_id __of_table_##name		\
 		__used __section(__##table##_of_table)			\
+		__aligned(__alignof__(struct of_device_id))		\
 		 = { .compatible = compat,				\
 		     .data = (fn == (fn_type)NULL) ? fn : fn  }
 #else

[PATCH 4.9 15/32] reiserfs: add check for an invalid ih_entry_count

[Greg Kroah-Hartman]

From: Rustam Kovhaev <rkovhaev@gmail.com>

commit d24396c5290ba8ab04ba505176874c4e04a2d53c upstream.

when directory item has an invalid value set for ih_entry_count it might
trigger use-after-free or out-of-bounds read in bin_search_in_dir_item()

ih_entry_count * IH_SIZE for directory item should not be larger than
ih_item_len

Link: https://lore.kernel.org/r/20201101140958.3650143-1-rkovhaev@gmail.com
Reported-and-tested-by: syzbot+83b6f7cf9922cae5c4d7@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=83b6f7cf9922cae5c4d7
Signed-off-by: Rustam Kovhaev <rkovhaev@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/reiserfs/stree.c |    6 ++++++
 1 file changed, 6 insertions(+)

--- a/fs/reiserfs/stree.c
+++ b/fs/reiserfs/stree.c
@@ -453,6 +453,12 @@ static int is_leaf(char *buf, int blocks
 					 "(second one): %h", ih);
 			return 0;
 		}
+		if (is_direntry_le_ih(ih) && (ih_item_len(ih) < (ih_entry_count(ih) * IH_SIZE))) {
+			reiserfs_warning(NULL, "reiserfs-5093",
+					 "item entry count seems wrong %h",
+					 ih);
+			return 0;
+		}
 		prev_location = ih_location(ih);
 	}
 

[PATCH 4.9 16/32] misc: vmw_vmci: fix kernel info-leak by initializing dbells in vmci_ctx_get_chkpt_doorbells()

[Greg Kroah-Hartman]

From: Anant Thazhemadam <anant.thazhemadam@gmail.com>

commit 31dcb6c30a26d32650ce134820f27de3c675a45a upstream.

A kernel-infoleak was reported by syzbot, which was caused because
dbells was left uninitialized.
Using kzalloc() instead of kmalloc() fixes this issue.

Reported-by: syzbot+a79e17c39564bedf0930@syzkaller.appspotmail.com
Tested-by: syzbot+a79e17c39564bedf0930@syzkaller.appspotmail.com
Signed-off-by: Anant Thazhemadam <anant.thazhemadam@gmail.com>
Link: https://lore.kernel.org/r/20201122224534.333471-1-anant.thazhemadam@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/misc/vmw_vmci/vmci_context.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/misc/vmw_vmci/vmci_context.c
+++ b/drivers/misc/vmw_vmci/vmci_context.c
@@ -750,7 +750,7 @@ static int vmci_ctx_get_chkpt_doorbells(
 			return VMCI_ERROR_MORE_DATA;
 		}
 
-		dbells = kmalloc(data_size, GFP_ATOMIC);
+		dbells = kzalloc(data_size, GFP_ATOMIC);
 		if (!dbells)
 			return VMCI_ERROR_NO_MEM;
 

[PATCH 4.9 17/32] media: gp8psk: initialize stats at power control logic

[Greg Kroah-Hartman]

From: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

commit d0ac1a26ed5943127cb0156148735f5f52a07075 upstream.

As reported on:
	https://lore.kernel.org/linux-media/20190627222020.45909-1-willemdebruijn.kernel@gmail.com/

if gp8psk_usb_in_op() returns an error, the status var is not
initialized. Yet, this var is used later on, in order to
identify:
	- if the device was already started;
	- if firmware has loaded;
	- if the LNBf was powered on.

Using status = 0 seems to ensure that everything will be
properly powered up.

So, instead of the proposed solution, let's just set
status = 0.

Reported-by: syzbot <syzkaller@googlegroups.com>
Reported-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/media/usb/dvb-usb/gp8psk.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/media/usb/dvb-usb/gp8psk.c
+++ b/drivers/media/usb/dvb-usb/gp8psk.c
@@ -186,7 +186,7 @@ out_rel_fw:
 
 static int gp8psk_power_ctrl(struct dvb_usb_device *d, int onoff)
 {
-	u8 status, buf;
+	u8 status = 0, buf;
 	int gp_product_id = le16_to_cpu(d->udev->descriptor.idProduct);
 
 	if (onoff) {

[PATCH 4.9 18/32] ALSA: seq: Use bool for snd_seq_queue internal flags

[Greg Kroah-Hartman]

From: Takashi Iwai <tiwai@suse.de>

commit 4ebd47037027c4beae99680bff3b20fdee5d7c1e upstream.

The snd_seq_queue struct contains various flags in the bit fields.
Those are categorized to two different use cases, both of which are
protected by different spinlocks.  That implies that there are still
potential risks of the bad operations for bit fields by concurrent
accesses.

For addressing the problem, this patch rearranges those flags to be
a standard bool instead of a bit field.

Reported-by: syzbot+63cbe31877bb80ef58f5@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/20201206083456.21110-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/core/seq/seq_queue.h |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/sound/core/seq/seq_queue.h
+++ b/sound/core/seq/seq_queue.h
@@ -40,10 +40,10 @@ struct snd_seq_queue {
 	
 	struct snd_seq_timer *timer;	/* time keeper for this queue */
 	int	owner;		/* client that 'owns' the timer */
-	unsigned int	locked:1,	/* timer is only accesibble by owner if set */
-		klocked:1,	/* kernel lock (after START) */	
-		check_again:1,
-		check_blocked:1;
+	bool	locked;		/* timer is only accesibble by owner if set */
+	bool	klocked;	/* kernel lock (after START) */
+	bool	check_again;	/* concurrent access happened during check */
+	bool	check_blocked;	/* queue being checked */
 
 	unsigned int flags;		/* status flags */
 	unsigned int info_flags;	/* info for sync */

[PATCH 4.9 19/32] module: set MODULE_STATE_GOING state when a module fails to load

[Greg Kroah-Hartman]

From: Miroslav Benes <mbenes@suse.cz>

[ Upstream commit 5e8ed280dab9eeabc1ba0b2db5dbe9fe6debb6b5 ]

If a module fails to load due to an error in prepare_coming_module(),
the following error handling in load_module() runs with
MODULE_STATE_COMING in module's state. Fix it by correctly setting
MODULE_STATE_GOING under "bug_cleanup" label.

Signed-off-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/module.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/kernel/module.c b/kernel/module.c
index 9cb1437151ae7..a106801f1582b 100644
--- a/kernel/module.c
+++ b/kernel/module.c
@@ -3738,6 +3738,7 @@ static int load_module(struct load_info *info, const char __user *uargs,
 				     MODULE_STATE_GOING, mod);
 	klp_module_going(mod);
  bug_cleanup:
+	mod->state = MODULE_STATE_GOING;
 	/* module_bug_cleanup needs module_mutex protection */
 	mutex_lock(&module_mutex);
 	module_bug_cleanup(mod);
-- 
2.27.0

[PATCH 4.9 20/32] quota: Dont overflow quota file offsets

[Greg Kroah-Hartman]

From: Jan Kara <jack@suse.cz>

[ Upstream commit 10f04d40a9fa29785206c619f80d8beedb778837 ]

The on-disk quota format supports quota files with upto 2^32 blocks. Be
careful when computing quota file offsets in the quota files from block
numbers as they can overflow 32-bit types. Since quota files larger than
4GB would require ~26 millions of quota users, this is mostly a
theoretical concern now but better be careful, fuzzers would find the
problem sooner or later anyway...

Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/quota/quota_tree.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/fs/quota/quota_tree.c b/fs/quota/quota_tree.c
index 0738972e8d3f0..ecd9887b0d1fe 100644
--- a/fs/quota/quota_tree.c
+++ b/fs/quota/quota_tree.c
@@ -61,7 +61,7 @@ static ssize_t read_blk(struct qtree_mem_dqinfo *info, uint blk, char *buf)
 
 	memset(buf, 0, info->dqi_usable_bs);
 	return sb->s_op->quota_read(sb, info->dqi_type, buf,
-	       info->dqi_usable_bs, blk << info->dqi_blocksize_bits);
+	       info->dqi_usable_bs, (loff_t)blk << info->dqi_blocksize_bits);
 }
 
 static ssize_t write_blk(struct qtree_mem_dqinfo *info, uint blk, char *buf)
@@ -70,7 +70,7 @@ static ssize_t write_blk(struct qtree_mem_dqinfo *info, uint blk, char *buf)
 	ssize_t ret;
 
 	ret = sb->s_op->quota_write(sb, info->dqi_type, buf,
-	       info->dqi_usable_bs, blk << info->dqi_blocksize_bits);
+	       info->dqi_usable_bs, (loff_t)blk << info->dqi_blocksize_bits);
 	if (ret != info->dqi_usable_bs) {
 		quota_error(sb, "dquota write failed");
 		if (ret >= 0)
@@ -283,7 +283,7 @@ static uint find_free_dqentry(struct qtree_mem_dqinfo *info,
 			    blk);
 		goto out_buf;
 	}
-	dquot->dq_off = (blk << info->dqi_blocksize_bits) +
+	dquot->dq_off = ((loff_t)blk << info->dqi_blocksize_bits) +
 			sizeof(struct qt_disk_dqdbheader) +
 			i * info->dqi_entry_size;
 	kfree(buf);
@@ -558,7 +558,7 @@ static loff_t find_block_dqentry(struct qtree_mem_dqinfo *info,
 		ret = -EIO;
 		goto out_buf;
 	} else {
-		ret = (blk << info->dqi_blocksize_bits) + sizeof(struct
+		ret = ((loff_t)blk << info->dqi_blocksize_bits) + sizeof(struct
 		  qt_disk_dqdbheader) + i * info->dqi_entry_size;
 	}
 out_buf:
-- 
2.27.0

[PATCH 4.9 21/32] powerpc: sysdev: add missing iounmap() on error in mpic_msgr_probe()

[Greg Kroah-Hartman]

From: Qinglang Miao <miaoqinglang@huawei.com>

[ Upstream commit ffa1797040c5da391859a9556be7b735acbe1242 ]

I noticed that iounmap() of msgr_block_addr before return from
mpic_msgr_probe() in the error handling case is missing. So use
devm_ioremap() instead of just ioremap() when remapping the message
register block, so the mapping will be automatically released on
probe failure.

Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201028091551.136400-1-miaoqinglang@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/sysdev/mpic_msgr.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/powerpc/sysdev/mpic_msgr.c b/arch/powerpc/sysdev/mpic_msgr.c
index 47fb336741d43..e26552708a281 100644
--- a/arch/powerpc/sysdev/mpic_msgr.c
+++ b/arch/powerpc/sysdev/mpic_msgr.c
@@ -196,7 +196,7 @@ static int mpic_msgr_probe(struct platform_device *dev)
 
 	/* IO map the message register block. */
 	of_address_to_resource(np, 0, &rsrc);
-	msgr_block_addr = ioremap(rsrc.start, resource_size(&rsrc));
+	msgr_block_addr = devm_ioremap(&dev->dev, rsrc.start, resource_size(&rsrc));
 	if (!msgr_block_addr) {
 		dev_err(&dev->dev, "Failed to iomap MPIC message registers");
 		return -EFAULT;
-- 
2.27.0

[PATCH 4.9 22/32] module: delay kobject uevent until after module init call

[Greg Kroah-Hartman]

From: Jessica Yu <jeyu@kernel.org>

[ Upstream commit 38dc717e97153e46375ee21797aa54777e5498f3 ]

Apparently there has been a longstanding race between udev/systemd and
the module loader. Currently, the module loader sends a uevent right
after sysfs initialization, but before the module calls its init
function. However, some udev rules expect that the module has
initialized already upon receiving the uevent.

This race has been triggered recently (see link in references) in some
systemd mount unit files. For instance, the configfs module creates the
/sys/kernel/config mount point in its init function, however the module
loader issues the uevent before this happens. sys-kernel-config.mount
expects to be able to mount /sys/kernel/config upon receipt of the
module loading uevent, but if the configfs module has not called its
init function yet, then this directory will not exist and the mount unit
fails. A similar situation exists for sys-fs-fuse-connections.mount, as
the fuse sysfs mount point is created during the fuse module's init
function. If udev is faster than module initialization then the mount
unit would fail in a similar fashion.

To fix this race, delay the module KOBJ_ADD uevent until after the
module has finished calling its init routine.

Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tested-By: Nicolas Morey-Chaisemartin <nmoreychaisemartin@suse.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/module.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/kernel/module.c b/kernel/module.c
index a106801f1582b..0219301b6109c 100644
--- a/kernel/module.c
+++ b/kernel/module.c
@@ -1762,7 +1762,6 @@ static int mod_sysfs_init(struct module *mod)
 	if (err)
 		mod_kobject_put(mod);
 
-	/* delay uevent until full sysfs population */
 out:
 	return err;
 }
@@ -1796,7 +1795,6 @@ static int mod_sysfs_setup(struct module *mod,
 	add_sect_attrs(mod, info);
 	add_notes_attrs(mod, info);
 
-	kobject_uevent(&mod->mkobj.kobj, KOBJ_ADD);
 	return 0;
 
 out_unreg_param:
@@ -3427,6 +3425,9 @@ static noinline int do_init_module(struct module *mod)
 	blocking_notifier_call_chain(&module_notify_list,
 				     MODULE_STATE_LIVE, mod);
 
+	/* Delay uevent until module has finished its init routine */
+	kobject_uevent(&mod->mkobj.kobj, KOBJ_ADD);
+
 	/*
 	 * We need to finish all async code before the module init sequence
 	 * is done.  This has potential to deadlock.  For example, a newly
-- 
2.27.0

[PATCH 4.9 23/32] kdev_t: always inline major/minor helper functions

[Greg Kroah-Hartman]

From: Josh Poimboeuf <jpoimboe@redhat.com>

commit aa8c7db494d0a83ecae583aa193f1134ef25d506 upstream.

Silly GCC doesn't always inline these trivial functions.

Fixes the following warning:

  arch/x86/kernel/sys_ia32.o: warning: objtool: cp_stat64()+0xd8: call to new_encode_dev() with UACCESS enabled

Link: https://lkml.kernel.org/r/984353b44a4484d86ba9f73884b7306232e25e30.1608737428.git.jpoimboe@redhat.com
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>	[build-tested]
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 include/linux/kdev_t.h |   22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)

--- a/include/linux/kdev_t.h
+++ b/include/linux/kdev_t.h
@@ -20,61 +20,61 @@
 	})
 
 /* acceptable for old filesystems */
-static inline bool old_valid_dev(dev_t dev)
+static __always_inline bool old_valid_dev(dev_t dev)
 {
 	return MAJOR(dev) < 256 && MINOR(dev) < 256;
 }
 
-static inline u16 old_encode_dev(dev_t dev)
+static __always_inline u16 old_encode_dev(dev_t dev)
 {
 	return (MAJOR(dev) << 8) | MINOR(dev);
 }
 
-static inline dev_t old_decode_dev(u16 val)
+static __always_inline dev_t old_decode_dev(u16 val)
 {
 	return MKDEV((val >> 8) & 255, val & 255);
 }
 
-static inline u32 new_encode_dev(dev_t dev)
+static __always_inline u32 new_encode_dev(dev_t dev)
 {
 	unsigned major = MAJOR(dev);
 	unsigned minor = MINOR(dev);
 	return (minor & 0xff) | (major << 8) | ((minor & ~0xff) << 12);
 }
 
-static inline dev_t new_decode_dev(u32 dev)
+static __always_inline dev_t new_decode_dev(u32 dev)
 {
 	unsigned major = (dev & 0xfff00) >> 8;
 	unsigned minor = (dev & 0xff) | ((dev >> 12) & 0xfff00);
 	return MKDEV(major, minor);
 }
 
-static inline u64 huge_encode_dev(dev_t dev)
+static __always_inline u64 huge_encode_dev(dev_t dev)
 {
 	return new_encode_dev(dev);
 }
 
-static inline dev_t huge_decode_dev(u64 dev)
+static __always_inline dev_t huge_decode_dev(u64 dev)
 {
 	return new_decode_dev(dev);
 }
 
-static inline int sysv_valid_dev(dev_t dev)
+static __always_inline int sysv_valid_dev(dev_t dev)
 {
 	return MAJOR(dev) < (1<<14) && MINOR(dev) < (1<<18);
 }
 
-static inline u32 sysv_encode_dev(dev_t dev)
+static __always_inline u32 sysv_encode_dev(dev_t dev)
 {
 	return MINOR(dev) | (MAJOR(dev) << 18);
 }
 
-static inline unsigned sysv_major(u32 dev)
+static __always_inline unsigned sysv_major(u32 dev)
 {
 	return (dev >> 18) & 0x3fff;
 }
 
-static inline unsigned sysv_minor(u32 dev)
+static __always_inline unsigned sysv_minor(u32 dev)
 {
 	return dev & 0x3ffff;
 }

[PATCH 4.9 24/32] xen/xenbus: Allow watches discard events before queueing

[Greg Kroah-Hartman]

From: SeongJae Park <sjpark@amazon.de>

commit fed1755b118147721f2c87b37b9d66e62c39b668 upstream.

If handling logics of watch events are slower than the events enqueue
logic and the events can be created from the guests, the guests could
trigger memory pressure by intensively inducing the events, because it
will create a huge number of pending events that exhausting the memory.

Fortunately, some watch events could be ignored, depending on its
handler callback.  For example, if the callback has interest in only one
single path, the watch wouldn't want multiple pending events.  Or, some
watches could ignore events to same path.

To let such watches to volutarily help avoiding the memory pressure
situation, this commit introduces new watch callback, 'will_handle'.  If
it is not NULL, it will be called for each new event just before
enqueuing it.  Then, if the callback returns false, the event will be
discarded.  No watch is using the callback for now, though.

This is part of XSA-349

Cc: stable@vger.kernel.org
Signed-off-by: SeongJae Park <sjpark@amazon.de>
Reported-by: Michael Kurth <mku@amazon.de>
Reported-by: Pawel Wieczorkiewicz <wipawel@amazon.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>


---
 drivers/net/xen-netback/xenbus.c   |    2 ++
 drivers/xen/xenbus/xenbus_client.c |    1 +
 drivers/xen/xenbus/xenbus_xs.c     |    7 ++++++-
 include/xen/xenbus.h               |    7 +++++++
 4 files changed, 16 insertions(+), 1 deletion(-)

--- a/drivers/net/xen-netback/xenbus.c
+++ b/drivers/net/xen-netback/xenbus.c
@@ -770,12 +770,14 @@ static int xen_register_credit_watch(str
 		return -ENOMEM;
 	snprintf(node, maxlen, "%s/rate", dev->nodename);
 	vif->credit_watch.node = node;
+	vif->credit_watch.will_handle = NULL;
 	vif->credit_watch.callback = xen_net_rate_changed;
 	err = register_xenbus_watch(&vif->credit_watch);
 	if (err) {
 		pr_err("Failed to set watcher %s\n", vif->credit_watch.node);
 		kfree(node);
 		vif->credit_watch.node = NULL;
+		vif->credit_watch.will_handle = NULL;
 		vif->credit_watch.callback = NULL;
 	}
 	return err;
--- a/drivers/xen/xenbus/xenbus_client.c
+++ b/drivers/xen/xenbus/xenbus_client.c
@@ -120,6 +120,7 @@ int xenbus_watch_path(struct xenbus_devi
 	int err;
 
 	watch->node = path;
+	watch->will_handle = NULL;
 	watch->callback = callback;
 
 	err = register_xenbus_watch(watch);
--- a/drivers/xen/xenbus/xenbus_xs.c
+++ b/drivers/xen/xenbus/xenbus_xs.c
@@ -901,7 +901,12 @@ static int process_msg(void)
 		spin_lock(&watches_lock);
 		msg->u.watch.handle = find_watch(
 			msg->u.watch.vec[XS_WATCH_TOKEN]);
-		if (msg->u.watch.handle != NULL) {
+		if (msg->u.watch.handle != NULL &&
+				(!msg->u.watch.handle->will_handle ||
+				 msg->u.watch.handle->will_handle(
+					 msg->u.watch.handle,
+					 (const char **)msg->u.watch.vec,
+					 msg->u.watch.vec_size))) {
 			spin_lock(&watch_events_lock);
 			list_add_tail(&msg->list, &watch_events);
 			wake_up(&watch_events_waitq);
--- a/include/xen/xenbus.h
+++ b/include/xen/xenbus.h
@@ -58,6 +58,13 @@ struct xenbus_watch
 	/* Path being watched. */
 	const char *node;
 
+	/*
+	 * Called just before enqueing new event while a spinlock is held.
+	 * The event will be discarded if this callback returns false.
+	 */
+	bool (*will_handle)(struct xenbus_watch *,
+			    const char **vec, unsigned int len);
+
 	/* Callback (executed in a process context with no locks held). */
 	void (*callback)(struct xenbus_watch *,
 			 const char **vec, unsigned int len);

[PATCH 4.9 25/32] xen/xenbus: Add will_handle callback support in xenbus_watch_path()

[Greg Kroah-Hartman]

From: SeongJae Park <sjpark@amazon.de>

commit 2e85d32b1c865bec703ce0c962221a5e955c52c2 upstream.

Some code does not directly make 'xenbus_watch' object and call
'register_xenbus_watch()' but use 'xenbus_watch_path()' instead.  This
commit adds support of 'will_handle' callback in the
'xenbus_watch_path()' and it's wrapper, 'xenbus_watch_pathfmt()'.

This is part of XSA-349

Cc: stable@vger.kernel.org
Signed-off-by: SeongJae Park <sjpark@amazon.de>
Reported-by: Michael Kurth <mku@amazon.de>
Reported-by: Pawel Wieczorkiewicz <wipawel@amazon.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>


---
 drivers/block/xen-blkback/xenbus.c |    3 ++-
 drivers/net/xen-netback/xenbus.c   |    2 +-
 drivers/xen/xen-pciback/xenbus.c   |    2 +-
 drivers/xen/xenbus/xenbus_client.c |    9 +++++++--
 drivers/xen/xenbus/xenbus_probe.c  |    2 +-
 include/xen/xenbus.h               |    6 +++++-
 6 files changed, 17 insertions(+), 7 deletions(-)

--- a/drivers/block/xen-blkback/xenbus.c
+++ b/drivers/block/xen-blkback/xenbus.c
@@ -646,7 +646,8 @@ static int xen_blkbk_probe(struct xenbus
 	/* setup back pointer */
 	be->blkif->be = be;
 
-	err = xenbus_watch_pathfmt(dev, &be->backend_watch, backend_changed,
+	err = xenbus_watch_pathfmt(dev, &be->backend_watch, NULL,
+				   backend_changed,
 				   "%s/%s", dev->nodename, "physical-device");
 	if (err)
 		goto fail;
--- a/drivers/net/xen-netback/xenbus.c
+++ b/drivers/net/xen-netback/xenbus.c
@@ -1040,7 +1040,7 @@ static void connect(struct backend_info
 	xenvif_carrier_on(be->vif);
 
 	unregister_hotplug_status_watch(be);
-	err = xenbus_watch_pathfmt(dev, &be->hotplug_status_watch,
+	err = xenbus_watch_pathfmt(dev, &be->hotplug_status_watch, NULL,
 				   hotplug_status_changed,
 				   "%s/%s", dev->nodename, "hotplug-status");
 	if (!err)
--- a/drivers/xen/xen-pciback/xenbus.c
+++ b/drivers/xen/xen-pciback/xenbus.c
@@ -689,7 +689,7 @@ static int xen_pcibk_xenbus_probe(struct
 
 	/* watch the backend node for backend configuration information */
 	err = xenbus_watch_path(dev, dev->nodename, &pdev->be_watch,
-				xen_pcibk_be_watch);
+				NULL, xen_pcibk_be_watch);
 	if (err)
 		goto out;
 
--- a/drivers/xen/xenbus/xenbus_client.c
+++ b/drivers/xen/xenbus/xenbus_client.c
@@ -114,19 +114,22 @@ EXPORT_SYMBOL_GPL(xenbus_strstate);
  */
 int xenbus_watch_path(struct xenbus_device *dev, const char *path,
 		      struct xenbus_watch *watch,
+		      bool (*will_handle)(struct xenbus_watch *,
+					  const char **, unsigned int),
 		      void (*callback)(struct xenbus_watch *,
 				       const char **, unsigned int))
 {
 	int err;
 
 	watch->node = path;
-	watch->will_handle = NULL;
+	watch->will_handle = will_handle;
 	watch->callback = callback;
 
 	err = register_xenbus_watch(watch);
 
 	if (err) {
 		watch->node = NULL;
+		watch->will_handle = NULL;
 		watch->callback = NULL;
 		xenbus_dev_fatal(dev, err, "adding watch on %s", path);
 	}
@@ -153,6 +156,8 @@ EXPORT_SYMBOL_GPL(xenbus_watch_path);
  */
 int xenbus_watch_pathfmt(struct xenbus_device *dev,
 			 struct xenbus_watch *watch,
+			 bool (*will_handle)(struct xenbus_watch *,
+					     const char **, unsigned int),
 			 void (*callback)(struct xenbus_watch *,
 					const char **, unsigned int),
 			 const char *pathfmt, ...)
@@ -169,7 +174,7 @@ int xenbus_watch_pathfmt(struct xenbus_d
 		xenbus_dev_fatal(dev, -ENOMEM, "allocating path for watch");
 		return -ENOMEM;
 	}
-	err = xenbus_watch_path(dev, path, watch, callback);
+	err = xenbus_watch_path(dev, path, watch, will_handle, callback);
 
 	if (err)
 		kfree(path);
--- a/drivers/xen/xenbus/xenbus_probe.c
+++ b/drivers/xen/xenbus/xenbus_probe.c
@@ -137,7 +137,7 @@ static int watch_otherend(struct xenbus_
 		container_of(dev->dev.bus, struct xen_bus_type, bus);
 
 	return xenbus_watch_pathfmt(dev, &dev->otherend_watch,
-				    bus->otherend_changed,
+				    NULL, bus->otherend_changed,
 				    "%s/%s", dev->otherend, "state");
 }
 
--- a/include/xen/xenbus.h
+++ b/include/xen/xenbus.h
@@ -201,10 +201,14 @@ void xenbus_suspend_cancel(void);
 
 int xenbus_watch_path(struct xenbus_device *dev, const char *path,
 		      struct xenbus_watch *watch,
+		      bool (*will_handle)(struct xenbus_watch *,
+					  const char **, unsigned int),
 		      void (*callback)(struct xenbus_watch *,
 				       const char **, unsigned int));
-__printf(4, 5)
+__printf(5, 6)
 int xenbus_watch_pathfmt(struct xenbus_device *dev, struct xenbus_watch *watch,
+			 bool (*will_handle)(struct xenbus_watch *,
+					     const char **, unsigned int),
 			 void (*callback)(struct xenbus_watch *,
 					  const char **, unsigned int),
 			 const char *pathfmt, ...);

[PATCH 4.9 26/32] xen/xenbus/xen_bus_type: Support will_handle watch callback

[Greg Kroah-Hartman]

From: SeongJae Park <sjpark@amazon.de>

commit be987200fbaceaef340872841d4f7af2c5ee8dc3 upstream.

This commit adds support of the 'will_handle' watch callback for
'xen_bus_type' users.

This is part of XSA-349

Cc: stable@vger.kernel.org
Signed-off-by: SeongJae Park <sjpark@amazon.de>
Reported-by: Michael Kurth <mku@amazon.de>
Reported-by: Pawel Wieczorkiewicz <wipawel@amazon.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/xen/xenbus/xenbus_probe.c |    3 ++-
 drivers/xen/xenbus/xenbus_probe.h |    2 ++
 2 files changed, 4 insertions(+), 1 deletion(-)

--- a/drivers/xen/xenbus/xenbus_probe.c
+++ b/drivers/xen/xenbus/xenbus_probe.c
@@ -137,7 +137,8 @@ static int watch_otherend(struct xenbus_
 		container_of(dev->dev.bus, struct xen_bus_type, bus);
 
 	return xenbus_watch_pathfmt(dev, &dev->otherend_watch,
-				    NULL, bus->otherend_changed,
+				    bus->otherend_will_handle,
+				    bus->otherend_changed,
 				    "%s/%s", dev->otherend, "state");
 }
 
--- a/drivers/xen/xenbus/xenbus_probe.h
+++ b/drivers/xen/xenbus/xenbus_probe.h
@@ -42,6 +42,8 @@ struct xen_bus_type {
 	int (*get_bus_id)(char bus_id[XEN_BUS_ID_SIZE], const char *nodename);
 	int (*probe)(struct xen_bus_type *bus, const char *type,
 		     const char *dir);
+	bool (*otherend_will_handle)(struct xenbus_watch *watch,
+				     const char **vec, unsigned int len);
 	void (*otherend_changed)(struct xenbus_watch *watch, const char **vec,
 				 unsigned int len);
 	struct bus_type bus;

[PATCH 4.9 27/32] xen/xenbus: Count pending messages for each watch

[Greg Kroah-Hartman]

From: SeongJae Park <sjpark@amazon.de>

commit 3dc86ca6b4c8cfcba9da7996189d1b5a358a94fc upstream.

This commit adds a counter of pending messages for each watch in the
struct.  It is used to skip unnecessary pending messages lookup in
'unregister_xenbus_watch()'.  It could also be used in 'will_handle'
callback.

This is part of XSA-349

Cc: stable@vger.kernel.org
Signed-off-by: SeongJae Park <sjpark@amazon.de>
Reported-by: Michael Kurth <mku@amazon.de>
Reported-by: Pawel Wieczorkiewicz <wipawel@amazon.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>


---
 drivers/xen/xenbus/xenbus_xs.c |   31 +++++++++++++++++++------------
 include/xen/xenbus.h           |    2 ++
 2 files changed, 21 insertions(+), 12 deletions(-)

--- a/drivers/xen/xenbus/xenbus_xs.c
+++ b/drivers/xen/xenbus/xenbus_xs.c
@@ -699,6 +699,8 @@ int register_xenbus_watch(struct xenbus_
 
 	sprintf(token, "%lX", (long)watch);
 
+	watch->nr_pending = 0;
+
 	down_read(&xs_state.watch_mutex);
 
 	spin_lock(&watches_lock);
@@ -748,12 +750,15 @@ void unregister_xenbus_watch(struct xenb
 
 	/* Cancel pending watch events. */
 	spin_lock(&watch_events_lock);
-	list_for_each_entry_safe(msg, tmp, &watch_events, list) {
-		if (msg->u.watch.handle != watch)
-			continue;
-		list_del(&msg->list);
-		kfree(msg->u.watch.vec);
-		kfree(msg);
+	if (watch->nr_pending) {
+		list_for_each_entry_safe(msg, tmp, &watch_events, list) {
+			if (msg->u.watch.handle != watch)
+				continue;
+			list_del(&msg->list);
+			kfree(msg->u.watch.vec);
+			kfree(msg);
+		}
+		watch->nr_pending = 0;
 	}
 	spin_unlock(&watch_events_lock);
 
@@ -800,7 +805,6 @@ void xs_suspend_cancel(void)
 
 static int xenwatch_thread(void *unused)
 {
-	struct list_head *ent;
 	struct xs_stored_msg *msg;
 
 	for (;;) {
@@ -813,13 +817,15 @@ static int xenwatch_thread(void *unused)
 		mutex_lock(&xenwatch_mutex);
 
 		spin_lock(&watch_events_lock);
-		ent = watch_events.next;
-		if (ent != &watch_events)
-			list_del(ent);
+		msg = list_first_entry_or_null(&watch_events,
+				struct xs_stored_msg, list);
+		if (msg) {
+			list_del(&msg->list);
+			msg->u.watch.handle->nr_pending--;
+		}
 		spin_unlock(&watch_events_lock);
 
-		if (ent != &watch_events) {
-			msg = list_entry(ent, struct xs_stored_msg, list);
+		if (msg) {
 			msg->u.watch.handle->callback(
 				msg->u.watch.handle,
 				(const char **)msg->u.watch.vec,
@@ -909,6 +915,7 @@ static int process_msg(void)
 					 msg->u.watch.vec_size))) {
 			spin_lock(&watch_events_lock);
 			list_add_tail(&msg->list, &watch_events);
+			msg->u.watch.handle->nr_pending++;
 			wake_up(&watch_events_waitq);
 			spin_unlock(&watch_events_lock);
 		} else {
--- a/include/xen/xenbus.h
+++ b/include/xen/xenbus.h
@@ -58,6 +58,8 @@ struct xenbus_watch
 	/* Path being watched. */
 	const char *node;
 
+	unsigned int nr_pending;
+
 	/*
 	 * Called just before enqueing new event while a spinlock is held.
 	 * The event will be discarded if this callback returns false.

[PATCH 4.9 28/32] xenbus/xenbus_backend: Disallow pending watch messages

[Greg Kroah-Hartman]

From: SeongJae Park <sjpark@amazon.de>

commit 9996bd494794a2fe393e97e7a982388c6249aa76 upstream.

'xenbus_backend' watches 'state' of devices, which is writable by
guests.  Hence, if guests intensively updates it, dom0 will have lots of
pending events that exhausting memory of dom0.  In other words, guests
can trigger dom0 memory pressure.  This is known as XSA-349.  However,
the watch callback of it, 'frontend_changed()', reads only 'state', so
doesn't need to have the pending events.

To avoid the problem, this commit disallows pending watch messages for
'xenbus_backend' using the 'will_handle()' watch callback.

This is part of XSA-349

Cc: stable@vger.kernel.org
Signed-off-by: SeongJae Park <sjpark@amazon.de>
Reported-by: Michael Kurth <mku@amazon.de>
Reported-by: Pawel Wieczorkiewicz <wipawel@amazon.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>


---
 drivers/xen/xenbus/xenbus_probe_backend.c |    7 +++++++
 1 file changed, 7 insertions(+)

--- a/drivers/xen/xenbus/xenbus_probe_backend.c
+++ b/drivers/xen/xenbus/xenbus_probe_backend.c
@@ -181,6 +181,12 @@ static int xenbus_probe_backend(struct x
 	return err;
 }
 
+static bool frontend_will_handle(struct xenbus_watch *watch,
+				 const char **vec, unsigned int len)
+{
+	return watch->nr_pending == 0;
+}
+
 static void frontend_changed(struct xenbus_watch *watch,
 			    const char **vec, unsigned int len)
 {
@@ -192,6 +198,7 @@ static struct xen_bus_type xenbus_backen
 	.levels = 3,		/* backend/type/<frontend>/<id> */
 	.get_bus_id = backend_bus_id,
 	.probe = xenbus_probe_backend,
+	.otherend_will_handle = frontend_will_handle,
 	.otherend_changed = frontend_changed,
 	.bus = {
 		.name		= "xen-backend",

[PATCH 4.9 29/32] iio: bmi160_core: Fix sparse warning due to incorrect type in assignment

[Greg Kroah-Hartman]

From: sayli karnik <karniksayli1995@gmail.com>

commit dd4ba3fb22233e69f06399ee0aa7ecb11d2b595c upstream

There is a type mismatch between the buffer which is of type s16 and the
samples stored, which are declared as __le16.

Fix the following sparse warning:
drivers/iio/imu/bmi160/bmi160_core.c:411:26: warning: incorrect type
in assignment (different base types)

drivers/iio/imu/bmi160/bmi160_core.c:411:26: expected signed short
[signed] [short] [explicitly-signed] <noident>
drivers/iio/imu/bmi160/bmi160_core.c:411:26: got restricted __le16
[addressable] [usertype] sample

This is a cosmetic-type patch since it does not alter code behaviour.
The le16 is going into a 16bit buf element, and is labelled as IIO_LE in the
channel buffer definition.

Signed-off-by: sayli karnik <karniksayli1995@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/iio/imu/bmi160/bmi160_core.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/iio/imu/bmi160/bmi160_core.c
+++ b/drivers/iio/imu/bmi160/bmi160_core.c
@@ -385,7 +385,8 @@ static irqreturn_t bmi160_trigger_handle
 	struct iio_poll_func *pf = p;
 	struct iio_dev *indio_dev = pf->indio_dev;
 	struct bmi160_data *data = iio_priv(indio_dev);
-	s16 buf[16]; /* 3 sens x 3 axis x s16 + 3 x s16 pad + 4 x s16 tstamp */
+	__le16 buf[16];
+	/* 3 sens x 3 axis x __le16 + 3 x __le16 pad + 4 x __le16 tstamp */
 	int i, ret, j = 0, base = BMI160_REG_DATA_MAGN_XOUT_L;
 	__le16 sample;
 

[PATCH 4.9 30/32] iio:imu:bmi160: Fix too large a buffer.

[Greg Kroah-Hartman]

From: Jonathan Cameron <Jonathan.Cameron@huawei.com>

commit dc7de42d6b50a07b37feeba4c6b5136290fcee81 upstream.

The comment implies this device has 3 sensor types, but it only
has an accelerometer and a gyroscope (both 3D).  As such the
buffer does not need to be as long as stated.

Note I've separated this from the following patch which fixes
the alignment for passing to iio_push_to_buffers_with_timestamp()
as they are different issues even if they affect the same line
of code.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Cc: Daniel Baluta <daniel.baluta@oss.nxp.com>
Cc: <Stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200920112742.170751-5-jic23@kernel.org
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/iio/imu/bmi160/bmi160_core.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/iio/imu/bmi160/bmi160_core.c
+++ b/drivers/iio/imu/bmi160/bmi160_core.c
@@ -385,8 +385,8 @@ static irqreturn_t bmi160_trigger_handle
 	struct iio_poll_func *pf = p;
 	struct iio_dev *indio_dev = pf->indio_dev;
 	struct bmi160_data *data = iio_priv(indio_dev);
-	__le16 buf[16];
-	/* 3 sens x 3 axis x __le16 + 3 x __le16 pad + 4 x __le16 tstamp */
+	__le16 buf[12];
+	/* 2 sens x 3 axis x __le16 + 2 x __le16 pad + 4 x __le16 tstamp */
 	int i, ret, j = 0, base = BMI160_REG_DATA_MAGN_XOUT_L;
 	__le16 sample;
 

[PATCH 4.9 31/32] iio:imu:bmi160: Fix alignment and data leak issues

[Greg Kroah-Hartman]

From: Jonathan Cameron <Jonathan.Cameron@huawei.com>

commit 7b6b51234df6cd8b04fe736b0b89c25612d896b8 upstream

One of a class of bugs pointed out by Lars in a recent review.
iio_push_to_buffers_with_timestamp assumes the buffer used is aligned
to the size of the timestamp (8 bytes).  This is not guaranteed in
this driver which uses an array of smaller elements on the stack.
As Lars also noted this anti pattern can involve a leak of data to
userspace and that indeed can happen here.  We close both issues by
moving to a suitable array in the iio_priv() data with alignment
explicitly requested.  This data is allocated with kzalloc() so no
data can leak apart from previous readings.

In this driver, depending on which channels are enabled, the timestamp
can be in a number of locations.  Hence we cannot use a structure
to specify the data layout without it being misleading.

Fixes: 77c4ad2d6a9b ("iio: imu: Add initial support for Bosch BMI160")
Reported-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Cc: Daniel Baluta  <daniel.baluta@gmail.com>
Cc: Daniel Baluta <daniel.baluta@oss.nxp.com>
Cc: <Stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200920112742.170751-6-jic23@kernel.org
[sudip: adjust context and use bmi160_data in old location]
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/iio/imu/bmi160/bmi160_core.c |   13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

--- a/drivers/iio/imu/bmi160/bmi160_core.c
+++ b/drivers/iio/imu/bmi160/bmi160_core.c
@@ -110,6 +110,13 @@ enum bmi160_sensor_type {
 
 struct bmi160_data {
 	struct regmap *regmap;
+	/*
+	 * Ensure natural alignment for timestamp if present.
+	 * Max length needed: 2 * 3 channels + 4 bytes padding + 8 byte ts.
+	 * If fewer channels are enabled, less space may be needed, as
+	 * long as the timestamp is still aligned to 8 bytes.
+	 */
+	__le16 buf[12] __aligned(8);
 };
 
 const struct regmap_config bmi160_regmap_config = {
@@ -385,8 +392,6 @@ static irqreturn_t bmi160_trigger_handle
 	struct iio_poll_func *pf = p;
 	struct iio_dev *indio_dev = pf->indio_dev;
 	struct bmi160_data *data = iio_priv(indio_dev);
-	__le16 buf[12];
-	/* 2 sens x 3 axis x __le16 + 2 x __le16 pad + 4 x __le16 tstamp */
 	int i, ret, j = 0, base = BMI160_REG_DATA_MAGN_XOUT_L;
 	__le16 sample;
 
@@ -396,10 +401,10 @@ static irqreturn_t bmi160_trigger_handle
 				       &sample, sizeof(__le16));
 		if (ret < 0)
 			goto done;
-		buf[j++] = sample;
+		data->buf[j++] = sample;
 	}
 
-	iio_push_to_buffers_with_timestamp(indio_dev, buf,
+	iio_push_to_buffers_with_timestamp(indio_dev, data->buf,
 					   iio_get_time_ns(indio_dev));
 done:
 	iio_trigger_notify_done(indio_dev->trig);

[PATCH 4.9 32/32] iio:magnetometer:mag3110: Fix alignment and data leak issues.

[Greg Kroah-Hartman]

From: Jonathan Cameron <Jonathan.Cameron@huawei.com>

commit 89deb1334252ea4a8491d47654811e28b0790364 upstream

One of a class of bugs pointed out by Lars in a recent review.
iio_push_to_buffers_with_timestamp() assumes the buffer used is aligned
to the size of the timestamp (8 bytes).  This is not guaranteed in
this driver which uses an array of smaller elements on the stack.
As Lars also noted this anti pattern can involve a leak of data to
userspace and that indeed can happen here.  We close both issues by
moving to a suitable structure in the iio_priv() data.
This data is allocated with kzalloc() so no data can leak apart from
previous readings.

The explicit alignment of ts is not necessary in this case but
does make the code slightly less fragile so I have included it.

Fixes: 39631b5f9584 ("iio: Add Freescale mag3110 magnetometer driver")
Reported-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Cc: <Stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200920112742.170751-4-jic23@kernel.org
[sudip: adjust context]
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/iio/magnetometer/mag3110.c |   13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

--- a/drivers/iio/magnetometer/mag3110.c
+++ b/drivers/iio/magnetometer/mag3110.c
@@ -52,6 +52,12 @@ struct mag3110_data {
 	struct i2c_client *client;
 	struct mutex lock;
 	u8 ctrl_reg1;
+	/* Ensure natural alignment of timestamp */
+	struct {
+		__be16 channels[3];
+		u8 temperature;
+		s64 ts __aligned(8);
+	} scan;
 };
 
 static int mag3110_request(struct mag3110_data *data)
@@ -262,10 +268,9 @@ static irqreturn_t mag3110_trigger_handl
 	struct iio_poll_func *pf = p;
 	struct iio_dev *indio_dev = pf->indio_dev;
 	struct mag3110_data *data = iio_priv(indio_dev);
-	u8 buffer[16]; /* 3 16-bit channels + 1 byte temp + padding + ts */
 	int ret;
 
-	ret = mag3110_read(data, (__be16 *) buffer);
+	ret = mag3110_read(data, data->scan.channels);
 	if (ret < 0)
 		goto done;
 
@@ -274,10 +279,10 @@ static irqreturn_t mag3110_trigger_handl
 			MAG3110_DIE_TEMP);
 		if (ret < 0)
 			goto done;
-		buffer[6] = ret;
+		data->scan.temperature = ret;
 	}
 
-	iio_push_to_buffers_with_timestamp(indio_dev, buffer,
+	iio_push_to_buffers_with_timestamp(indio_dev, &data->scan,
 		iio_get_time_ns(indio_dev));
 
 done: