[PATCH 4.19 00/52] 4.19.179-rc1 review

[PATCH 4.19 00/52] 4.19.179-rc1 review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 4.19.179 release.
There are 52 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Sun, 07 Mar 2021 12:08:39 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.179-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 4.19.179-rc1

Takashi Iwai <tiwai@suse.de>
    ALSA: hda/realtek: Apply dual codec quirks for MSI Godlike X570 board

Eckhart Mohr <e.mohr@tuxedocomputers.com>
    ALSA: hda/realtek: Add quirk for Clevo NH55RZQ

Sakari Ailus <sakari.ailus@linux.intel.com>
    media: v4l: ioctl: Fix memory leak in video_usercopy

Jens Axboe <axboe@kernel.dk>
    swap: fix swapfile read/write offset

Rokudo Yan <wu-yan@tcl.com>
    zsmalloc: account the number of compacted pages correctly

Jan Beulich <jbeulich@suse.com>
    xen-netback: respect gnttab_map_refs()'s return value

Jan Beulich <jbeulich@suse.com>
    Xen/gnttab: handle p2m update errors on a per-slot basis

Chris Leech <cleech@redhat.com>
    scsi: iscsi: Verify lengths on passthrough PDUs

Chris Leech <cleech@redhat.com>
    scsi: iscsi: Ensure sysfs attributes are limited to PAGE_SIZE

Joe Perches <joe@perches.com>
    sysfs: Add sysfs_emit and sysfs_emit_at to format sysfs output

Lee Duncan <lduncan@suse.com>
    scsi: iscsi: Restrict sessions and handles to admin capabilities

Hans de Goede <hdegoede@redhat.com>
    ASoC: Intel: bytcr_rt5640: Add quirk for the Acer One S1002 tablet

Hans de Goede <hdegoede@redhat.com>
    ASoC: Intel: bytcr_rt5640: Add quirk for the Voyo Winpad A15 tablet

Hans de Goede <hdegoede@redhat.com>
    ASoC: Intel: bytcr_rt5640: Add quirk for the Estar Beauty HD MID 7316R tablet

John David Anglin <dave.anglin@bell.net>
    parisc: Bump 64-bit IRQ stack size to 64 KB

Josef Bacik <josef@toxicpanda.com>
    btrfs: fix error handling in commit_fs_roots

Chao Yu <yuchao0@huawei.com>
    f2fs: fix to set/clear I_LINKABLE under i_lock

Jaegeuk Kim <jaegeuk@kernel.org>
    f2fs: handle unallocated section and zone on pinned/atgc

Ricardo Ribalda <ribalda@chromium.org>
    media: uvcvideo: Allow entities with no pads

Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
    drm/amd/display: Guard against NULL pointer deref when get_i2c_info fails

Nirmoy Das <nirmoy.das@amd.com>
    PCI: Add a REBAR size quirk for Sapphire RX 5600 XT Pulse

Ard Biesheuvel <ardb@kernel.org>
    crypto: tcrypt - avoid signed overflow in byte count

Christian Gromm <christian.gromm@microchip.com>
    staging: most: sound: add sanity check for function argument

Gopal Tiwari <gtiwari@redhat.com>
    Bluetooth: Fix null pointer dereference in amp_read_loc_assoc_final_data

Fangrui Song <maskray@google.com>
    x86/build: Treat R_386_PLT32 relocation as R_386_PC32

Miaoqing Pan <miaoqing@codeaurora.org>
    ath10k: fix wmi mgmt tx queue full due to race condition

Di Zhu <zhudi21@huawei.com>
    pktgen: fix misuse of BUG_ON() in pktgen_thread_worker()

Claire Chang <tientzu@chromium.org>
    Bluetooth: hci_h5: Set HCI_QUIRK_SIMULTANEOUS_DISCOVERY for btrtl

Tony Lindgren <tony@atomide.com>
    wlcore: Fix command execute failure 19 for wl12xx

Jiri Slaby <jslaby@suse.cz>
    vt/consolemap: do font sum unsigned

Heiner Kallweit <hkallweit1@gmail.com>
    x86/reboot: Add Zotac ZBOX CI327 nano PCI reboot quirk

Dinghao Liu <dinghao.liu@zju.edu.cn>
    staging: fwserial: Fix error handling in fwserial_create

Marek Vasut <marex@denx.de>
    rsi: Move card interrupt handling to RX thread

Marek Vasut <marex@denx.de>
    rsi: Fix TX EAPOL packet handling against iwlwifi AP

Geert Uytterhoeven <geert+renesas@glider.be>
    dt-bindings: net: btusb: DT fix s/interrupt-name/interrupt-names/

Vladimir Oltean <vladimir.oltean@nxp.com>
    net: bridge: use switchdev for port flags set through sysfs too

Li Xinhai <lixinhai.lxh@gmail.com>
    mm/hugetlb.c: fix unnecessary address expansion of pmd sharing

Marco Elver <elver@google.com>
    net: fix up truesize of cloned skb in skb_prepare_for_shift()

Sabyrzhan Tasbolatov <snovitoll@gmail.com>
    smackfs: restrict bytes count in smackfs write functions

Yumei Huang <yuhuang@redhat.com>
    xfs: Fix assert failure in xfs_setattr_size()

Sean Young <sean@mess.org>
    media: mceusb: sanity check for prescaler value

Zqiang <qiang.zhang@windriver.com>
    udlfb: Fix memory leak in dlfb_usb_probe

Randy Dunlap <rdunlap@infradead.org>
    JFS: more checks for invalid superblock

Nathan Chancellor <natechancellor@gmail.com>
    MIPS: VDSO: Use CLANG_FLAGS instead of filtering out '--target='

Andrew Murray <andrew.murray@arm.com>
    arm64: Use correct ll/sc atomic constraints

Will Deacon <will.deacon@arm.com>
    arm64: cmpxchg: Use "K" instead of "L" for ll/sc immediate constraint

Will Deacon <will.deacon@arm.com>
    arm64: Avoid redundant type conversions in xchg() and cmpxchg()

Shaoying Xu <shaoyi@amazon.com>
    arm64 module: set plt* section addresses to 0x0

Cornelia Huck <cohuck@redhat.com>
    virtio/s390: implement virtio-ccw revision 2 correctly

Sergey Senozhatsky <senozhatsky@chromium.org>
    drm/virtio: use kvmalloc for large allocations

Mike Kravetz <mike.kravetz@oracle.com>
    hugetlb: fix update_and_free_page contig page struct assumption

Lech Perczak <lech.perczak@gmail.com>
    net: usb: qmi_wwan: support ZTE P685M modem


-------------

Diffstat:

 Documentation/devicetree/bindings/net/btusb.txt |   2 +-
 Documentation/filesystems/sysfs.txt             |   8 +-
 Makefile                                        |   4 +-
 arch/arm/xen/p2m.c                              |  35 +++++-
 arch/arm64/include/asm/atomic_ll_sc.h           | 108 +++++++++--------
 arch/arm64/include/asm/atomic_lse.h             |  46 ++++----
 arch/arm64/include/asm/cmpxchg.h                | 116 +++++++++----------
 arch/arm64/kernel/module.lds                    |   6 +-
 arch/mips/vdso/Makefile                         |   5 +-
 arch/parisc/kernel/irq.c                        |   4 +
 arch/x86/kernel/module.c                        |   1 +
 arch/x86/kernel/reboot.c                        |   9 ++
 arch/x86/tools/relocs.c                         |  12 +-
 arch/x86/xen/p2m.c                              |  44 ++++++-
 crypto/tcrypt.c                                 |  20 ++--
 drivers/block/zram/zram_drv.c                   |   2 +-
 drivers/bluetooth/hci_h5.c                      |   5 +
 drivers/gpu/drm/amd/display/dc/core/dc_link.c   |   5 +
 drivers/gpu/drm/virtio/virtgpu_vq.c             |   6 +-
 drivers/media/rc/mceusb.c                       |   9 +-
 drivers/media/usb/uvc/uvc_driver.c              |   7 +-
 drivers/media/v4l2-core/v4l2-ioctl.c            |  19 ++-
 drivers/net/usb/qmi_wwan.c                      |   1 +
 drivers/net/wireless/ath/ath10k/mac.c           |  15 +--
 drivers/net/wireless/rsi/rsi_91x_hal.c          |   3 +-
 drivers/net/wireless/rsi/rsi_91x_sdio.c         |   6 +-
 drivers/net/wireless/rsi/rsi_91x_sdio_ops.c     |  52 +++------
 drivers/net/wireless/rsi/rsi_sdio.h             |   8 +-
 drivers/net/wireless/ti/wl12xx/main.c           |   3 -
 drivers/net/wireless/ti/wlcore/main.c           |  15 +--
 drivers/net/wireless/ti/wlcore/wlcore.h         |   3 -
 drivers/net/xen-netback/netback.c               |  12 +-
 drivers/pci/pci.c                               |   9 +-
 drivers/s390/virtio/virtio_ccw.c                |   4 +-
 drivers/scsi/libiscsi.c                         | 148 ++++++++++++------------
 drivers/scsi/scsi_transport_iscsi.c             |  38 ++++--
 drivers/staging/fwserial/fwserial.c             |   2 +
 drivers/staging/most/sound/sound.c              |   2 +
 drivers/tty/vt/consolemap.c                     |   2 +-
 drivers/video/fbdev/udlfb.c                     |   1 +
 fs/btrfs/transaction.c                          |  11 +-
 fs/f2fs/namei.c                                 |   8 ++
 fs/f2fs/segment.h                               |   4 +-
 fs/jfs/jfs_filsys.h                             |   1 +
 fs/jfs/jfs_mount.c                              |  10 ++
 fs/sysfs/file.c                                 |  55 +++++++++
 fs/xfs/xfs_iops.c                               |   2 +-
 include/linux/sysfs.h                           |  16 +++
 include/linux/zsmalloc.h                        |   2 +-
 mm/hugetlb.c                                    |  28 +++--
 mm/page_io.c                                    |  11 +-
 mm/swapfile.c                                   |   2 +-
 mm/zsmalloc.c                                   |  17 ++-
 net/bluetooth/amp.c                             |   3 +
 net/bridge/br_sysfs_if.c                        |   9 +-
 net/core/pktgen.c                               |   2 +-
 net/core/skbuff.c                               |  14 ++-
 security/smack/smackfs.c                        |  21 +++-
 sound/pci/hda/patch_realtek.c                   |   2 +
 sound/soc/intel/boards/bytcr_rt5640.c           |  37 ++++++
 60 files changed, 652 insertions(+), 400 deletions(-)

[PATCH 4.19 01/52] net: usb: qmi_wwan: support ZTE P685M modem

[Greg Kroah-Hartman]

From: Lech Perczak <lech.perczak@gmail.com>

commit 88eee9b7b42e69fb622ddb3ff6f37e8e4347f5b2 upstream.

Now that interface 3 in "option" driver is no longer mapped, add device
ID matching it to qmi_wwan.

The modem is used inside ZTE MF283+ router and carriers identify it as
such.
Interface mapping is:
0: QCDM, 1: AT (PCUI), 2: AT (Modem), 3: QMI, 4: ADB

T:  Bus=02 Lev=02 Prnt=02 Port=05 Cnt=01 Dev#=  3 Spd=480  MxCh= 0
D:  Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=19d2 ProdID=1275 Rev=f0.00
S:  Manufacturer=ZTE,Incorporated
S:  Product=ZTE Technologies MSM
S:  SerialNumber=P685M510ZTED0000CP&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&0
C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=83(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=85(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E:  Ad=87(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E:  Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
Link: https://lore.kernel.org/r/20210223183456.6377-1-lech.perczak@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/usb/qmi_wwan.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/net/usb/qmi_wwan.c
+++ b/drivers/net/usb/qmi_wwan.c
@@ -1217,6 +1217,7 @@ static const struct usb_device_id produc
 	{QMI_FIXED_INTF(0x19d2, 0x1255, 4)},
 	{QMI_FIXED_INTF(0x19d2, 0x1256, 4)},
 	{QMI_FIXED_INTF(0x19d2, 0x1270, 5)},	/* ZTE MF667 */
+	{QMI_FIXED_INTF(0x19d2, 0x1275, 3)},	/* ZTE P685M */
 	{QMI_FIXED_INTF(0x19d2, 0x1401, 2)},
 	{QMI_FIXED_INTF(0x19d2, 0x1402, 2)},	/* ZTE MF60 */
 	{QMI_FIXED_INTF(0x19d2, 0x1424, 2)},

[PATCH 4.19 02/52] hugetlb: fix update_and_free_page contig page struct assumption

[Greg Kroah-Hartman]

From: Mike Kravetz <mike.kravetz@oracle.com>

commit dbfee5aee7e54f83d96ceb8e3e80717fac62ad63 upstream.

page structs are not guaranteed to be contiguous for gigantic pages.  The
routine update_and_free_page can encounter a gigantic page, yet it assumes
page structs are contiguous when setting page flags in subpages.

If update_and_free_page encounters non-contiguous page structs, we can see
“BUG: Bad page state in process …” errors.

Non-contiguous page structs are generally not an issue.  However, they can
exist with a specific kernel configuration and hotplug operations.  For
example: Configure the kernel with CONFIG_SPARSEMEM and
!CONFIG_SPARSEMEM_VMEMMAP.  Then, hotplug add memory for the area where
the gigantic page will be allocated.  Zi Yan outlined steps to reproduce
here [1].

[1] https://lore.kernel.org/linux-mm/16F7C58B-4D79-41C5-9B64-A1A1628F4AF2@nvidia.com/

Link: https://lkml.kernel.org/r/20210217184926.33567-1-mike.kravetz@oracle.com
Fixes: 944d9fec8d7a ("hugetlb: add support for gigantic page allocation at runtime")
Signed-off-by: Zi Yan <ziy@nvidia.com>
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Davidlohr Bueso <dbueso@suse.de>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
---
 mm/hugetlb.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -1171,14 +1171,16 @@ static inline void destroy_compound_giga
 static void update_and_free_page(struct hstate *h, struct page *page)
 {
 	int i;
+	struct page *subpage = page;
 
 	if (hstate_is_gigantic(h) && !gigantic_page_supported())
 		return;
 
 	h->nr_huge_pages--;
 	h->nr_huge_pages_node[page_to_nid(page)]--;
-	for (i = 0; i < pages_per_huge_page(h); i++) {
-		page[i].flags &= ~(1 << PG_locked | 1 << PG_error |
+	for (i = 0; i < pages_per_huge_page(h);
+	     i++, subpage = mem_map_next(subpage, page, i)) {
+		subpage->flags &= ~(1 << PG_locked | 1 << PG_error |
 				1 << PG_referenced | 1 << PG_dirty |
 				1 << PG_active | 1 << PG_private |
 				1 << PG_writeback);

[PATCH 4.19 03/52] drm/virtio: use kvmalloc for large allocations

[Greg Kroah-Hartman]

From: Sergey Senozhatsky <senozhatsky@chromium.org>

commit ea86f3defd55f141a44146e66cbf8ffb683d60da upstream.

We observed that some of virtio_gpu_object_shmem_init() allocations
can be rather costly - order 6 - which can be difficult to fulfill
under memory pressure conditions. Switch to kvmalloc_array() in
virtio_gpu_object_shmem_init() and let the kernel vmalloc the entries
array.

Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20201105014744.1662226-1-senozhatsky@chromium.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Doug Horn <doughorn@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/virtio/virtgpu_vq.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/drivers/gpu/drm/virtio/virtgpu_vq.c
+++ b/drivers/gpu/drm/virtio/virtgpu_vq.c
@@ -868,9 +868,9 @@ int virtio_gpu_object_attach(struct virt
 	}
 
 	/* gets freed when the ring has consumed it */
-	ents = kmalloc_array(obj->pages->nents,
-			     sizeof(struct virtio_gpu_mem_entry),
-			     GFP_KERNEL);
+	ents = kvmalloc_array(obj->pages->nents,
+			      sizeof(struct virtio_gpu_mem_entry),
+			      GFP_KERNEL);
 	if (!ents) {
 		DRM_ERROR("failed to allocate ent list\n");
 		return -ENOMEM;

[PATCH 4.19 04/52] virtio/s390: implement virtio-ccw revision 2 correctly

[Greg Kroah-Hartman]

From: Cornelia Huck <cohuck@redhat.com>

commit 182f709c5cff683e6732d04c78e328de0532284f upstream.

CCW_CMD_READ_STATUS was introduced with revision 2 of virtio-ccw,
and drivers should only rely on it being implemented when they
negotiated at least that revision with the device.

However, virtio_ccw_get_status() issued READ_STATUS for any
device operating at least at revision 1. If the device accepts
READ_STATUS regardless of the negotiated revision (which some
implementations like QEMU do, even though the spec currently does
not allow it), everything works as intended. While a device
rejecting the command should also be handled gracefully, we will
not be able to see any changes the device makes to the status,
such as setting NEEDS_RESET or setting the status to zero after
a completed reset.

We negotiated the revision to at most 1, as we never bumped the
maximum revision; let's do that now and properly send READ_STATUS
only if we are operating at least at revision 2.

Cc: stable@vger.kernel.org
Fixes: 7d3ce5ab9430 ("virtio/s390: support READ_STATUS command for virtio-ccw")
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Link: https://lore.kernel.org/r/20210216110645.1087321-1-cohuck@redhat.com
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/s390/virtio/virtio_ccw.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/s390/virtio/virtio_ccw.c
+++ b/drivers/s390/virtio/virtio_ccw.c
@@ -103,7 +103,7 @@ struct virtio_rev_info {
 };
 
 /* the highest virtio-ccw revision we support */
-#define VIRTIO_CCW_REV_MAX 1
+#define VIRTIO_CCW_REV_MAX 2
 
 struct virtio_ccw_vq_info {
 	struct virtqueue *vq;
@@ -911,7 +911,7 @@ static u8 virtio_ccw_get_status(struct v
 	u8 old_status = *vcdev->status;
 	struct ccw1 *ccw;
 
-	if (vcdev->revision < 1)
+	if (vcdev->revision < 2)
 		return *vcdev->status;
 
 	ccw = kzalloc(sizeof(*ccw), GFP_DMA | GFP_KERNEL);

[PATCH 4.19 05/52] arm64 module: set plt* section addresses to 0x0

[Greg Kroah-Hartman]

From: Shaoying Xu <shaoyi@amazon.com>

commit f5c6d0fcf90ce07ee0d686d465b19b247ebd5ed7 upstream.

These plt* and .text.ftrace_trampoline sections specified for arm64 have
non-zero addressses. Non-zero section addresses in a relocatable ELF would
confuse GDB when it tries to compute the section offsets and it ends up
printing wrong symbol addresses. Therefore, set them to zero, which mirrors
the change in commit 5d8591bc0fba ("module: set ksymtab/kcrctab* section
addresses to 0x0").

Reported-by: Frank van der Linden <fllinden@amazon.com>
Signed-off-by: Shaoying Xu <shaoyi@amazon.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210216183234.GA23876@amazon.com
Signed-off-by: Will Deacon <will@kernel.org>
[shaoyi@amazon.com: made same changes in arch/arm64/kernel/module.lds for 5.4]
Signed-off-by: Shaoying Xu <shaoyi@amazon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm64/include/asm/module.lds.h was renamed from arch/arm64/kernel/module.lds
by commit 596b0474d3d9 ("kbuild: preprocess module linker script") since v5.10.
Therefore, made same changes in arch/arm64/kernel/module.lds for 5.4. 

 arch/arm64/kernel/module.lds |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/arch/arm64/kernel/module.lds
+++ b/arch/arm64/kernel/module.lds
@@ -1,5 +1,5 @@
 SECTIONS {
-	.plt (NOLOAD) : { BYTE(0) }
-	.init.plt (NOLOAD) : { BYTE(0) }
-	.text.ftrace_trampoline (NOLOAD) : { BYTE(0) }
+	.plt 0 (NOLOAD) : { BYTE(0) }
+	.init.plt 0 (NOLOAD) : { BYTE(0) }
+	.text.ftrace_trampoline 0 (NOLOAD) : { BYTE(0) }
 }

[PATCH 4.19 06/52] arm64: Avoid redundant type conversions in xchg() and cmpxchg()

[Greg Kroah-Hartman]

From: Will Deacon <will.deacon@arm.com>

commit 5ef3fe4cecdf82fdd71ce78988403963d01444d4 upstream.

Our atomic instructions (either LSE atomics of LDXR/STXR sequences)
natively support byte, half-word, word and double-word memory accesses
so there is no need to mask the data register prior to being stored.

Signed-off-by: Will Deacon <will.deacon@arm.com>
[bwh: Backported to 4.19: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm64/include/asm/atomic_ll_sc.h |   53 +++++++--------
 arch/arm64/include/asm/atomic_lse.h   |   46 ++++++-------
 arch/arm64/include/asm/cmpxchg.h      |  116 +++++++++++++++++-----------------
 3 files changed, 108 insertions(+), 107 deletions(-)

--- a/arch/arm64/include/asm/atomic_ll_sc.h
+++ b/arch/arm64/include/asm/atomic_ll_sc.h
@@ -248,48 +248,49 @@ __LL_SC_PREFIX(atomic64_dec_if_positive(
 }
 __LL_SC_EXPORT(atomic64_dec_if_positive);
 
-#define __CMPXCHG_CASE(w, sz, name, mb, acq, rel, cl)			\
-__LL_SC_INLINE unsigned long						\
-__LL_SC_PREFIX(__cmpxchg_case_##name(volatile void *ptr,		\
-				     unsigned long old,			\
-				     unsigned long new))		\
+#define __CMPXCHG_CASE(w, sfx, name, sz, mb, acq, rel, cl)		\
+__LL_SC_INLINE u##sz							\
+__LL_SC_PREFIX(__cmpxchg_case_##name##sz(volatile void *ptr,		\
+					 unsigned long old,		\
+					 u##sz new))			\
 {									\
-	unsigned long tmp, oldval;					\
+	unsigned long tmp;						\
+	u##sz oldval;							\
 									\
 	asm volatile(							\
 	"	prfm	pstl1strm, %[v]\n"				\
-	"1:	ld" #acq "xr" #sz "\t%" #w "[oldval], %[v]\n"		\
+	"1:	ld" #acq "xr" #sfx "\t%" #w "[oldval], %[v]\n"		\
 	"	eor	%" #w "[tmp], %" #w "[oldval], %" #w "[old]\n"	\
 	"	cbnz	%" #w "[tmp], 2f\n"				\
-	"	st" #rel "xr" #sz "\t%w[tmp], %" #w "[new], %[v]\n"	\
+	"	st" #rel "xr" #sfx "\t%w[tmp], %" #w "[new], %[v]\n"	\
 	"	cbnz	%w[tmp], 1b\n"					\
 	"	" #mb "\n"						\
 	"2:"								\
 	: [tmp] "=&r" (tmp), [oldval] "=&r" (oldval),			\
-	  [v] "+Q" (*(unsigned long *)ptr)				\
+	  [v] "+Q" (*(u##sz *)ptr)					\
 	: [old] "Lr" (old), [new] "r" (new)				\
 	: cl);								\
 									\
 	return oldval;							\
 }									\
-__LL_SC_EXPORT(__cmpxchg_case_##name);
+__LL_SC_EXPORT(__cmpxchg_case_##name##sz);
 
-__CMPXCHG_CASE(w, b,     1,        ,  ,  ,         )
-__CMPXCHG_CASE(w, h,     2,        ,  ,  ,         )
-__CMPXCHG_CASE(w,  ,     4,        ,  ,  ,         )
-__CMPXCHG_CASE( ,  ,     8,        ,  ,  ,         )
-__CMPXCHG_CASE(w, b, acq_1,        , a,  , "memory")
-__CMPXCHG_CASE(w, h, acq_2,        , a,  , "memory")
-__CMPXCHG_CASE(w,  , acq_4,        , a,  , "memory")
-__CMPXCHG_CASE( ,  , acq_8,        , a,  , "memory")
-__CMPXCHG_CASE(w, b, rel_1,        ,  , l, "memory")
-__CMPXCHG_CASE(w, h, rel_2,        ,  , l, "memory")
-__CMPXCHG_CASE(w,  , rel_4,        ,  , l, "memory")
-__CMPXCHG_CASE( ,  , rel_8,        ,  , l, "memory")
-__CMPXCHG_CASE(w, b,  mb_1, dmb ish,  , l, "memory")
-__CMPXCHG_CASE(w, h,  mb_2, dmb ish,  , l, "memory")
-__CMPXCHG_CASE(w,  ,  mb_4, dmb ish,  , l, "memory")
-__CMPXCHG_CASE( ,  ,  mb_8, dmb ish,  , l, "memory")
+__CMPXCHG_CASE(w, b,     ,  8,        ,  ,  ,         )
+__CMPXCHG_CASE(w, h,     , 16,        ,  ,  ,         )
+__CMPXCHG_CASE(w,  ,     , 32,        ,  ,  ,         )
+__CMPXCHG_CASE( ,  ,     , 64,        ,  ,  ,         )
+__CMPXCHG_CASE(w, b, acq_,  8,        , a,  , "memory")
+__CMPXCHG_CASE(w, h, acq_, 16,        , a,  , "memory")
+__CMPXCHG_CASE(w,  , acq_, 32,        , a,  , "memory")
+__CMPXCHG_CASE( ,  , acq_, 64,        , a,  , "memory")
+__CMPXCHG_CASE(w, b, rel_,  8,        ,  , l, "memory")
+__CMPXCHG_CASE(w, h, rel_, 16,        ,  , l, "memory")
+__CMPXCHG_CASE(w,  , rel_, 32,        ,  , l, "memory")
+__CMPXCHG_CASE( ,  , rel_, 64,        ,  , l, "memory")
+__CMPXCHG_CASE(w, b,  mb_,  8, dmb ish,  , l, "memory")
+__CMPXCHG_CASE(w, h,  mb_, 16, dmb ish,  , l, "memory")
+__CMPXCHG_CASE(w,  ,  mb_, 32, dmb ish,  , l, "memory")
+__CMPXCHG_CASE( ,  ,  mb_, 64, dmb ish,  , l, "memory")
 
 #undef __CMPXCHG_CASE
 
--- a/arch/arm64/include/asm/atomic_lse.h
+++ b/arch/arm64/include/asm/atomic_lse.h
@@ -480,24 +480,24 @@ static inline long atomic64_dec_if_posit
 
 #define __LL_SC_CMPXCHG(op)	__LL_SC_CALL(__cmpxchg_case_##op)
 
-#define __CMPXCHG_CASE(w, sz, name, mb, cl...)				\
-static inline unsigned long __cmpxchg_case_##name(volatile void *ptr,	\
-						  unsigned long old,	\
-						  unsigned long new)	\
+#define __CMPXCHG_CASE(w, sfx, name, sz, mb, cl...)			\
+static inline u##sz __cmpxchg_case_##name##sz(volatile void *ptr,	\
+					      unsigned long old,	\
+					      u##sz new)		\
 {									\
 	register unsigned long x0 asm ("x0") = (unsigned long)ptr;	\
 	register unsigned long x1 asm ("x1") = old;			\
-	register unsigned long x2 asm ("x2") = new;			\
+	register u##sz x2 asm ("x2") = new;				\
 									\
 	asm volatile(							\
 	__LSE_PREAMBLE							\
 	ARM64_LSE_ATOMIC_INSN(						\
 	/* LL/SC */							\
-	__LL_SC_CMPXCHG(name)						\
+	__LL_SC_CMPXCHG(name##sz)					\
 	__nops(2),							\
 	/* LSE atomics */						\
 	"	mov	" #w "30, %" #w "[old]\n"			\
-	"	cas" #mb #sz "\t" #w "30, %" #w "[new], %[v]\n"		\
+	"	cas" #mb #sfx "\t" #w "30, %" #w "[new], %[v]\n"	\
 	"	mov	%" #w "[ret], " #w "30")			\
 	: [ret] "+r" (x0), [v] "+Q" (*(unsigned long *)ptr)		\
 	: [old] "r" (x1), [new] "r" (x2)				\
@@ -506,22 +506,22 @@ static inline unsigned long __cmpxchg_ca
 	return x0;							\
 }
 
-__CMPXCHG_CASE(w, b,     1,   )
-__CMPXCHG_CASE(w, h,     2,   )
-__CMPXCHG_CASE(w,  ,     4,   )
-__CMPXCHG_CASE(x,  ,     8,   )
-__CMPXCHG_CASE(w, b, acq_1,  a, "memory")
-__CMPXCHG_CASE(w, h, acq_2,  a, "memory")
-__CMPXCHG_CASE(w,  , acq_4,  a, "memory")
-__CMPXCHG_CASE(x,  , acq_8,  a, "memory")
-__CMPXCHG_CASE(w, b, rel_1,  l, "memory")
-__CMPXCHG_CASE(w, h, rel_2,  l, "memory")
-__CMPXCHG_CASE(w,  , rel_4,  l, "memory")
-__CMPXCHG_CASE(x,  , rel_8,  l, "memory")
-__CMPXCHG_CASE(w, b,  mb_1, al, "memory")
-__CMPXCHG_CASE(w, h,  mb_2, al, "memory")
-__CMPXCHG_CASE(w,  ,  mb_4, al, "memory")
-__CMPXCHG_CASE(x,  ,  mb_8, al, "memory")
+__CMPXCHG_CASE(w, b,     ,  8,   )
+__CMPXCHG_CASE(w, h,     , 16,   )
+__CMPXCHG_CASE(w,  ,     , 32,   )
+__CMPXCHG_CASE(x,  ,     , 64,   )
+__CMPXCHG_CASE(w, b, acq_,  8,  a, "memory")
+__CMPXCHG_CASE(w, h, acq_, 16,  a, "memory")
+__CMPXCHG_CASE(w,  , acq_, 32,  a, "memory")
+__CMPXCHG_CASE(x,  , acq_, 64,  a, "memory")
+__CMPXCHG_CASE(w, b, rel_,  8,  l, "memory")
+__CMPXCHG_CASE(w, h, rel_, 16,  l, "memory")
+__CMPXCHG_CASE(w,  , rel_, 32,  l, "memory")
+__CMPXCHG_CASE(x,  , rel_, 64,  l, "memory")
+__CMPXCHG_CASE(w, b,  mb_,  8, al, "memory")
+__CMPXCHG_CASE(w, h,  mb_, 16, al, "memory")
+__CMPXCHG_CASE(w,  ,  mb_, 32, al, "memory")
+__CMPXCHG_CASE(x,  ,  mb_, 64, al, "memory")
 
 #undef __LL_SC_CMPXCHG
 #undef __CMPXCHG_CASE
--- a/arch/arm64/include/asm/cmpxchg.h
+++ b/arch/arm64/include/asm/cmpxchg.h
@@ -30,46 +30,46 @@
  * barrier case is generated as release+dmb for the former and
  * acquire+release for the latter.
  */
-#define __XCHG_CASE(w, sz, name, mb, nop_lse, acq, acq_lse, rel, cl)	\
-static inline unsigned long __xchg_case_##name(unsigned long x,		\
-					       volatile void *ptr)	\
-{									\
-	unsigned long ret, tmp;						\
-									\
-	asm volatile(ARM64_LSE_ATOMIC_INSN(				\
-	/* LL/SC */							\
-	"	prfm	pstl1strm, %2\n"				\
-	"1:	ld" #acq "xr" #sz "\t%" #w "0, %2\n"			\
-	"	st" #rel "xr" #sz "\t%w1, %" #w "3, %2\n"		\
-	"	cbnz	%w1, 1b\n"					\
-	"	" #mb,							\
-	/* LSE atomics */						\
-	"	swp" #acq_lse #rel #sz "\t%" #w "3, %" #w "0, %2\n"	\
-		__nops(3)						\
-	"	" #nop_lse)						\
-	: "=&r" (ret), "=&r" (tmp), "+Q" (*(unsigned long *)ptr)	\
-	: "r" (x)							\
-	: cl);								\
-									\
-	return ret;							\
+#define __XCHG_CASE(w, sfx, name, sz, mb, nop_lse, acq, acq_lse, rel, cl)	\
+static inline u##sz __xchg_case_##name##sz(u##sz x, volatile void *ptr)		\
+{										\
+	u##sz ret;								\
+	unsigned long tmp;							\
+										\
+	asm volatile(ARM64_LSE_ATOMIC_INSN(					\
+	/* LL/SC */								\
+	"	prfm	pstl1strm, %2\n"					\
+	"1:	ld" #acq "xr" #sfx "\t%" #w "0, %2\n"				\
+	"	st" #rel "xr" #sfx "\t%w1, %" #w "3, %2\n"			\
+	"	cbnz	%w1, 1b\n"						\
+	"	" #mb,								\
+	/* LSE atomics */							\
+	"	swp" #acq_lse #rel #sfx "\t%" #w "3, %" #w "0, %2\n"		\
+		__nops(3)							\
+	"	" #nop_lse)							\
+	: "=&r" (ret), "=&r" (tmp), "+Q" (*(u##sz *)ptr)			\
+	: "r" (x)								\
+	: cl);									\
+										\
+	return ret;								\
 }
 
-__XCHG_CASE(w, b,     1,        ,    ,  ,  ,  ,         )
-__XCHG_CASE(w, h,     2,        ,    ,  ,  ,  ,         )
-__XCHG_CASE(w,  ,     4,        ,    ,  ,  ,  ,         )
-__XCHG_CASE( ,  ,     8,        ,    ,  ,  ,  ,         )
-__XCHG_CASE(w, b, acq_1,        ,    , a, a,  , "memory")
-__XCHG_CASE(w, h, acq_2,        ,    , a, a,  , "memory")
-__XCHG_CASE(w,  , acq_4,        ,    , a, a,  , "memory")
-__XCHG_CASE( ,  , acq_8,        ,    , a, a,  , "memory")
-__XCHG_CASE(w, b, rel_1,        ,    ,  ,  , l, "memory")
-__XCHG_CASE(w, h, rel_2,        ,    ,  ,  , l, "memory")
-__XCHG_CASE(w,  , rel_4,        ,    ,  ,  , l, "memory")
-__XCHG_CASE( ,  , rel_8,        ,    ,  ,  , l, "memory")
-__XCHG_CASE(w, b,  mb_1, dmb ish, nop,  , a, l, "memory")
-__XCHG_CASE(w, h,  mb_2, dmb ish, nop,  , a, l, "memory")
-__XCHG_CASE(w,  ,  mb_4, dmb ish, nop,  , a, l, "memory")
-__XCHG_CASE( ,  ,  mb_8, dmb ish, nop,  , a, l, "memory")
+__XCHG_CASE(w, b,     ,  8,        ,    ,  ,  ,  ,         )
+__XCHG_CASE(w, h,     , 16,        ,    ,  ,  ,  ,         )
+__XCHG_CASE(w,  ,     , 32,        ,    ,  ,  ,  ,         )
+__XCHG_CASE( ,  ,     , 64,        ,    ,  ,  ,  ,         )
+__XCHG_CASE(w, b, acq_,  8,        ,    , a, a,  , "memory")
+__XCHG_CASE(w, h, acq_, 16,        ,    , a, a,  , "memory")
+__XCHG_CASE(w,  , acq_, 32,        ,    , a, a,  , "memory")
+__XCHG_CASE( ,  , acq_, 64,        ,    , a, a,  , "memory")
+__XCHG_CASE(w, b, rel_,  8,        ,    ,  ,  , l, "memory")
+__XCHG_CASE(w, h, rel_, 16,        ,    ,  ,  , l, "memory")
+__XCHG_CASE(w,  , rel_, 32,        ,    ,  ,  , l, "memory")
+__XCHG_CASE( ,  , rel_, 64,        ,    ,  ,  , l, "memory")
+__XCHG_CASE(w, b,  mb_,  8, dmb ish, nop,  , a, l, "memory")
+__XCHG_CASE(w, h,  mb_, 16, dmb ish, nop,  , a, l, "memory")
+__XCHG_CASE(w,  ,  mb_, 32, dmb ish, nop,  , a, l, "memory")
+__XCHG_CASE( ,  ,  mb_, 64, dmb ish, nop,  , a, l, "memory")
 
 #undef __XCHG_CASE
 
@@ -80,13 +80,13 @@ static __always_inline  unsigned long __
 {									\
 	switch (size) {							\
 	case 1:								\
-		return __xchg_case##sfx##_1(x, ptr);			\
+		return __xchg_case##sfx##_8(x, ptr);			\
 	case 2:								\
-		return __xchg_case##sfx##_2(x, ptr);			\
+		return __xchg_case##sfx##_16(x, ptr);			\
 	case 4:								\
-		return __xchg_case##sfx##_4(x, ptr);			\
+		return __xchg_case##sfx##_32(x, ptr);			\
 	case 8:								\
-		return __xchg_case##sfx##_8(x, ptr);			\
+		return __xchg_case##sfx##_64(x, ptr);			\
 	default:							\
 		BUILD_BUG();						\
 	}								\
@@ -123,13 +123,13 @@ static __always_inline unsigned long __c
 {									\
 	switch (size) {							\
 	case 1:								\
-		return __cmpxchg_case##sfx##_1(ptr, (u8)old, new);	\
+		return __cmpxchg_case##sfx##_8(ptr, (u8)old, new);	\
 	case 2:								\
-		return __cmpxchg_case##sfx##_2(ptr, (u16)old, new);	\
+		return __cmpxchg_case##sfx##_16(ptr, (u16)old, new);	\
 	case 4:								\
-		return __cmpxchg_case##sfx##_4(ptr, old, new);		\
+		return __cmpxchg_case##sfx##_32(ptr, old, new);		\
 	case 8:								\
-		return __cmpxchg_case##sfx##_8(ptr, old, new);		\
+		return __cmpxchg_case##sfx##_64(ptr, old, new);		\
 	default:							\
 		BUILD_BUG();						\
 	}								\
@@ -197,16 +197,16 @@ __CMPXCHG_GEN(_mb)
 	__ret; \
 })
 
-#define __CMPWAIT_CASE(w, sz, name)					\
-static inline void __cmpwait_case_##name(volatile void *ptr,		\
-					 unsigned long val)		\
+#define __CMPWAIT_CASE(w, sfx, sz)					\
+static inline void __cmpwait_case_##sz(volatile void *ptr,		\
+				       unsigned long val)		\
 {									\
 	unsigned long tmp;						\
 									\
 	asm volatile(							\
 	"	sevl\n"							\
 	"	wfe\n"							\
-	"	ldxr" #sz "\t%" #w "[tmp], %[v]\n"			\
+	"	ldxr" #sfx "\t%" #w "[tmp], %[v]\n"			\
 	"	eor	%" #w "[tmp], %" #w "[tmp], %" #w "[val]\n"	\
 	"	cbnz	%" #w "[tmp], 1f\n"				\
 	"	wfe\n"							\
@@ -215,10 +215,10 @@ static inline void __cmpwait_case_##name
 	: [val] "r" (val));						\
 }
 
-__CMPWAIT_CASE(w, b, 1);
-__CMPWAIT_CASE(w, h, 2);
-__CMPWAIT_CASE(w,  , 4);
-__CMPWAIT_CASE( ,  , 8);
+__CMPWAIT_CASE(w, b, 8);
+__CMPWAIT_CASE(w, h, 16);
+__CMPWAIT_CASE(w,  , 32);
+__CMPWAIT_CASE( ,  , 64);
 
 #undef __CMPWAIT_CASE
 
@@ -229,13 +229,13 @@ static __always_inline void __cmpwait##s
 {									\
 	switch (size) {							\
 	case 1:								\
-		return __cmpwait_case##sfx##_1(ptr, (u8)val);		\
+		return __cmpwait_case##sfx##_8(ptr, (u8)val);		\
 	case 2:								\
-		return __cmpwait_case##sfx##_2(ptr, (u16)val);		\
+		return __cmpwait_case##sfx##_16(ptr, (u16)val);		\
 	case 4:								\
-		return __cmpwait_case##sfx##_4(ptr, val);		\
+		return __cmpwait_case##sfx##_32(ptr, val);		\
 	case 8:								\
-		return __cmpwait_case##sfx##_8(ptr, val);		\
+		return __cmpwait_case##sfx##_64(ptr, val);		\
 	default:							\
 		BUILD_BUG();						\
 	}								\

[PATCH 4.19 07/52] arm64: cmpxchg: Use "K" instead of "L" for ll/sc immediate constraint

[Greg Kroah-Hartman]

From: Will Deacon <will.deacon@arm.com>

commit 4230509978f2921182da4e9197964dccdbe463c3 upstream.

The "L" AArch64 machine constraint, which we use for the "old" value in
an LL/SC cmpxchg(), generates an immediate that is suitable for a 64-bit
logical instruction. However, for cmpxchg() operations on types smaller
than 64 bits, this constraint can result in an invalid instruction which
is correctly rejected by GAS, such as EOR W1, W1, #0xffffffff.

Whilst we could special-case the constraint based on the cmpxchg size,
it's far easier to change the constraint to "K" and put up with using
a register for large 64-bit immediates. For out-of-line LL/SC atomics,
this is all moot anyway.

Reported-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm64/include/asm/atomic_ll_sc.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/arm64/include/asm/atomic_ll_sc.h
+++ b/arch/arm64/include/asm/atomic_ll_sc.h
@@ -268,7 +268,7 @@ __LL_SC_PREFIX(__cmpxchg_case_##name##sz
 	"2:"								\
 	: [tmp] "=&r" (tmp), [oldval] "=&r" (oldval),			\
 	  [v] "+Q" (*(u##sz *)ptr)					\
-	: [old] "Lr" (old), [new] "r" (new)				\
+	: [old] "Kr" (old), [new] "r" (new)				\
 	: cl);								\
 									\
 	return oldval;							\

[PATCH 4.19 08/52] arm64: Use correct ll/sc atomic constraints

[Greg Kroah-Hartman]

From: Andrew Murray <andrew.murray@arm.com>

commit 580fa1b874711d633f9b145b7777b0e83ebf3787 upstream.

The A64 ISA accepts distinct (but overlapping) ranges of immediates for:

 * add arithmetic instructions ('I' machine constraint)
 * sub arithmetic instructions ('J' machine constraint)
 * 32-bit logical instructions ('K' machine constraint)
 * 64-bit logical instructions ('L' machine constraint)

... but we currently use the 'I' constraint for many atomic operations
using sub or logical instructions, which is not always valid.

When CONFIG_ARM64_LSE_ATOMICS is not set, this allows invalid immediates
to be passed to instructions, potentially resulting in a build failure.
When CONFIG_ARM64_LSE_ATOMICS is selected the out-of-line ll/sc atomics
always use a register as they have no visibility of the value passed by
the caller.

This patch adds a constraint parameter to the ATOMIC_xx and
__CMPXCHG_CASE macros so that we can pass appropriate constraints for
each case, with uses updated accordingly.

Unfortunately prior to GCC 8.1.0 the 'K' constraint erroneously accepted
'4294967295', so we must instead force the use of a register.

Signed-off-by: Andrew Murray <andrew.murray@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
[bwh: Backported to 4.19: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm64/include/asm/atomic_ll_sc.h |   89 +++++++++++++++++-----------------
 1 file changed, 47 insertions(+), 42 deletions(-)

--- a/arch/arm64/include/asm/atomic_ll_sc.h
+++ b/arch/arm64/include/asm/atomic_ll_sc.h
@@ -37,7 +37,7 @@
  * (the optimize attribute silently ignores these options).
  */
 
-#define ATOMIC_OP(op, asm_op)						\
+#define ATOMIC_OP(op, asm_op, constraint)				\
 __LL_SC_INLINE void							\
 __LL_SC_PREFIX(atomic_##op(int i, atomic_t *v))				\
 {									\
@@ -51,11 +51,11 @@ __LL_SC_PREFIX(atomic_##op(int i, atomic
 "	stxr	%w1, %w0, %2\n"						\
 "	cbnz	%w1, 1b"						\
 	: "=&r" (result), "=&r" (tmp), "+Q" (v->counter)		\
-	: "Ir" (i));							\
+	: #constraint "r" (i));						\
 }									\
 __LL_SC_EXPORT(atomic_##op);
 
-#define ATOMIC_OP_RETURN(name, mb, acq, rel, cl, op, asm_op)		\
+#define ATOMIC_OP_RETURN(name, mb, acq, rel, cl, op, asm_op, constraint)\
 __LL_SC_INLINE int							\
 __LL_SC_PREFIX(atomic_##op##_return##name(int i, atomic_t *v))		\
 {									\
@@ -70,14 +70,14 @@ __LL_SC_PREFIX(atomic_##op##_return##nam
 "	cbnz	%w1, 1b\n"						\
 "	" #mb								\
 	: "=&r" (result), "=&r" (tmp), "+Q" (v->counter)		\
-	: "Ir" (i)							\
+	: #constraint "r" (i)						\
 	: cl);								\
 									\
 	return result;							\
 }									\
 __LL_SC_EXPORT(atomic_##op##_return##name);
 
-#define ATOMIC_FETCH_OP(name, mb, acq, rel, cl, op, asm_op)		\
+#define ATOMIC_FETCH_OP(name, mb, acq, rel, cl, op, asm_op, constraint)	\
 __LL_SC_INLINE int							\
 __LL_SC_PREFIX(atomic_fetch_##op##name(int i, atomic_t *v))		\
 {									\
@@ -92,7 +92,7 @@ __LL_SC_PREFIX(atomic_fetch_##op##name(i
 "	cbnz	%w2, 1b\n"						\
 "	" #mb								\
 	: "=&r" (result), "=&r" (val), "=&r" (tmp), "+Q" (v->counter)	\
-	: "Ir" (i)							\
+	: #constraint "r" (i)						\
 	: cl);								\
 									\
 	return result;							\
@@ -110,8 +110,8 @@ __LL_SC_EXPORT(atomic_fetch_##op##name);
 	ATOMIC_FETCH_OP (_acquire,        , a,  , "memory", __VA_ARGS__)\
 	ATOMIC_FETCH_OP (_release,        ,  , l, "memory", __VA_ARGS__)
 
-ATOMIC_OPS(add, add)
-ATOMIC_OPS(sub, sub)
+ATOMIC_OPS(add, add, I)
+ATOMIC_OPS(sub, sub, J)
 
 #undef ATOMIC_OPS
 #define ATOMIC_OPS(...)							\
@@ -121,17 +121,17 @@ ATOMIC_OPS(sub, sub)
 	ATOMIC_FETCH_OP (_acquire,        , a,  , "memory", __VA_ARGS__)\
 	ATOMIC_FETCH_OP (_release,        ,  , l, "memory", __VA_ARGS__)
 
-ATOMIC_OPS(and, and)
-ATOMIC_OPS(andnot, bic)
-ATOMIC_OPS(or, orr)
-ATOMIC_OPS(xor, eor)
+ATOMIC_OPS(and, and, )
+ATOMIC_OPS(andnot, bic, )
+ATOMIC_OPS(or, orr, )
+ATOMIC_OPS(xor, eor, )
 
 #undef ATOMIC_OPS
 #undef ATOMIC_FETCH_OP
 #undef ATOMIC_OP_RETURN
 #undef ATOMIC_OP
 
-#define ATOMIC64_OP(op, asm_op)						\
+#define ATOMIC64_OP(op, asm_op, constraint)				\
 __LL_SC_INLINE void							\
 __LL_SC_PREFIX(atomic64_##op(long i, atomic64_t *v))			\
 {									\
@@ -145,11 +145,11 @@ __LL_SC_PREFIX(atomic64_##op(long i, ato
 "	stxr	%w1, %0, %2\n"						\
 "	cbnz	%w1, 1b"						\
 	: "=&r" (result), "=&r" (tmp), "+Q" (v->counter)		\
-	: "Ir" (i));							\
+	: #constraint "r" (i));						\
 }									\
 __LL_SC_EXPORT(atomic64_##op);
 
-#define ATOMIC64_OP_RETURN(name, mb, acq, rel, cl, op, asm_op)		\
+#define ATOMIC64_OP_RETURN(name, mb, acq, rel, cl, op, asm_op, constraint)\
 __LL_SC_INLINE long							\
 __LL_SC_PREFIX(atomic64_##op##_return##name(long i, atomic64_t *v))	\
 {									\
@@ -164,14 +164,14 @@ __LL_SC_PREFIX(atomic64_##op##_return##n
 "	cbnz	%w1, 1b\n"						\
 "	" #mb								\
 	: "=&r" (result), "=&r" (tmp), "+Q" (v->counter)		\
-	: "Ir" (i)							\
+	: #constraint "r" (i)						\
 	: cl);								\
 									\
 	return result;							\
 }									\
 __LL_SC_EXPORT(atomic64_##op##_return##name);
 
-#define ATOMIC64_FETCH_OP(name, mb, acq, rel, cl, op, asm_op)		\
+#define ATOMIC64_FETCH_OP(name, mb, acq, rel, cl, op, asm_op, constraint)\
 __LL_SC_INLINE long							\
 __LL_SC_PREFIX(atomic64_fetch_##op##name(long i, atomic64_t *v))	\
 {									\
@@ -186,7 +186,7 @@ __LL_SC_PREFIX(atomic64_fetch_##op##name
 "	cbnz	%w2, 1b\n"						\
 "	" #mb								\
 	: "=&r" (result), "=&r" (val), "=&r" (tmp), "+Q" (v->counter)	\
-	: "Ir" (i)							\
+	: #constraint "r" (i)						\
 	: cl);								\
 									\
 	return result;							\
@@ -204,8 +204,8 @@ __LL_SC_EXPORT(atomic64_fetch_##op##name
 	ATOMIC64_FETCH_OP (_acquire,, a,  , "memory", __VA_ARGS__)	\
 	ATOMIC64_FETCH_OP (_release,,  , l, "memory", __VA_ARGS__)
 
-ATOMIC64_OPS(add, add)
-ATOMIC64_OPS(sub, sub)
+ATOMIC64_OPS(add, add, I)
+ATOMIC64_OPS(sub, sub, J)
 
 #undef ATOMIC64_OPS
 #define ATOMIC64_OPS(...)						\
@@ -215,10 +215,10 @@ ATOMIC64_OPS(sub, sub)
 	ATOMIC64_FETCH_OP (_acquire,, a,  , "memory", __VA_ARGS__)	\
 	ATOMIC64_FETCH_OP (_release,,  , l, "memory", __VA_ARGS__)
 
-ATOMIC64_OPS(and, and)
-ATOMIC64_OPS(andnot, bic)
-ATOMIC64_OPS(or, orr)
-ATOMIC64_OPS(xor, eor)
+ATOMIC64_OPS(and, and, L)
+ATOMIC64_OPS(andnot, bic, )
+ATOMIC64_OPS(or, orr, L)
+ATOMIC64_OPS(xor, eor, L)
 
 #undef ATOMIC64_OPS
 #undef ATOMIC64_FETCH_OP
@@ -248,7 +248,7 @@ __LL_SC_PREFIX(atomic64_dec_if_positive(
 }
 __LL_SC_EXPORT(atomic64_dec_if_positive);
 
-#define __CMPXCHG_CASE(w, sfx, name, sz, mb, acq, rel, cl)		\
+#define __CMPXCHG_CASE(w, sfx, name, sz, mb, acq, rel, cl, constraint)	\
 __LL_SC_INLINE u##sz							\
 __LL_SC_PREFIX(__cmpxchg_case_##name##sz(volatile void *ptr,		\
 					 unsigned long old,		\
@@ -268,29 +268,34 @@ __LL_SC_PREFIX(__cmpxchg_case_##name##sz
 	"2:"								\
 	: [tmp] "=&r" (tmp), [oldval] "=&r" (oldval),			\
 	  [v] "+Q" (*(u##sz *)ptr)					\
-	: [old] "Kr" (old), [new] "r" (new)				\
+	: [old] #constraint "r" (old), [new] "r" (new)			\
 	: cl);								\
 									\
 	return oldval;							\
 }									\
 __LL_SC_EXPORT(__cmpxchg_case_##name##sz);
 
-__CMPXCHG_CASE(w, b,     ,  8,        ,  ,  ,         )
-__CMPXCHG_CASE(w, h,     , 16,        ,  ,  ,         )
-__CMPXCHG_CASE(w,  ,     , 32,        ,  ,  ,         )
-__CMPXCHG_CASE( ,  ,     , 64,        ,  ,  ,         )
-__CMPXCHG_CASE(w, b, acq_,  8,        , a,  , "memory")
-__CMPXCHG_CASE(w, h, acq_, 16,        , a,  , "memory")
-__CMPXCHG_CASE(w,  , acq_, 32,        , a,  , "memory")
-__CMPXCHG_CASE( ,  , acq_, 64,        , a,  , "memory")
-__CMPXCHG_CASE(w, b, rel_,  8,        ,  , l, "memory")
-__CMPXCHG_CASE(w, h, rel_, 16,        ,  , l, "memory")
-__CMPXCHG_CASE(w,  , rel_, 32,        ,  , l, "memory")
-__CMPXCHG_CASE( ,  , rel_, 64,        ,  , l, "memory")
-__CMPXCHG_CASE(w, b,  mb_,  8, dmb ish,  , l, "memory")
-__CMPXCHG_CASE(w, h,  mb_, 16, dmb ish,  , l, "memory")
-__CMPXCHG_CASE(w,  ,  mb_, 32, dmb ish,  , l, "memory")
-__CMPXCHG_CASE( ,  ,  mb_, 64, dmb ish,  , l, "memory")
+/*
+ * Earlier versions of GCC (no later than 8.1.0) appear to incorrectly
+ * handle the 'K' constraint for the value 4294967295 - thus we use no
+ * constraint for 32 bit operations.
+ */
+__CMPXCHG_CASE(w, b,     ,  8,        ,  ,  ,         , )
+__CMPXCHG_CASE(w, h,     , 16,        ,  ,  ,         , )
+__CMPXCHG_CASE(w,  ,     , 32,        ,  ,  ,         , )
+__CMPXCHG_CASE( ,  ,     , 64,        ,  ,  ,         , L)
+__CMPXCHG_CASE(w, b, acq_,  8,        , a,  , "memory", )
+__CMPXCHG_CASE(w, h, acq_, 16,        , a,  , "memory", )
+__CMPXCHG_CASE(w,  , acq_, 32,        , a,  , "memory", )
+__CMPXCHG_CASE( ,  , acq_, 64,        , a,  , "memory", L)
+__CMPXCHG_CASE(w, b, rel_,  8,        ,  , l, "memory", )
+__CMPXCHG_CASE(w, h, rel_, 16,        ,  , l, "memory", )
+__CMPXCHG_CASE(w,  , rel_, 32,        ,  , l, "memory", )
+__CMPXCHG_CASE( ,  , rel_, 64,        ,  , l, "memory", L)
+__CMPXCHG_CASE(w, b,  mb_,  8, dmb ish,  , l, "memory", )
+__CMPXCHG_CASE(w, h,  mb_, 16, dmb ish,  , l, "memory", )
+__CMPXCHG_CASE(w,  ,  mb_, 32, dmb ish,  , l, "memory", )
+__CMPXCHG_CASE( ,  ,  mb_, 64, dmb ish,  , l, "memory", L)
 
 #undef __CMPXCHG_CASE
 

[PATCH 4.19 09/52] MIPS: VDSO: Use CLANG_FLAGS instead of filtering out --target=

[Greg Kroah-Hartman]

From: Nathan Chancellor <natechancellor@gmail.com>

commit 76d7fff22be3e4185ee5f9da2eecbd8188e76b2c upstream.

Commit ee67855ecd9d ("MIPS: vdso: Allow clang's --target flag in VDSO
cflags") allowed the '--target=' flag from the main Makefile to filter
through to the vDSO. However, it did not bring any of the other clang
specific flags for controlling the integrated assembler and the GNU
tools locations (--prefix=, --gcc-toolchain=, and -no-integrated-as).
Without these, we will get a warning (visible with tinyconfig):

arch/mips/vdso/elf.S:14:1: warning: DWARF2 only supports one section per
compilation unit
.pushsection .note.Linux, "a",@note ; .balign 4 ; .long 2f - 1f ; .long
4484f - 3f ; .long 0 ; 1:.asciz "Linux" ; 2:.balign 4 ; 3:
^
arch/mips/vdso/elf.S:34:2: warning: DWARF2 only supports one section per
compilation unit
 .section .mips_abiflags, "a"
 ^

All of these flags are bundled up under CLANG_FLAGS in the main Makefile
and exported so that they can be added to Makefiles that set their own
CFLAGS. Use this value instead of filtering out '--target=' so there is
no warning and all of the tools are properly used.

Cc: stable@vger.kernel.org
Fixes: ee67855ecd9d ("MIPS: vdso: Allow clang's --target flag in VDSO cflags")
Link: https://github.com/ClangBuiltLinux/linux/issues/1256
Reported-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
[nc: Fix conflict due to lack of 99570c3da96a and 076f421da5d4 in 4.19]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/mips/vdso/Makefile |    5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

--- a/arch/mips/vdso/Makefile
+++ b/arch/mips/vdso/Makefile
@@ -10,12 +10,9 @@ ccflags-vdso := \
 	$(filter -march=%,$(KBUILD_CFLAGS)) \
 	$(filter -m%-float,$(KBUILD_CFLAGS)) \
 	$(filter -mno-loongson-%,$(KBUILD_CFLAGS)) \
+	$(CLANG_FLAGS) \
 	-D__VDSO__
 
-ifeq ($(cc-name),clang)
-ccflags-vdso += $(filter --target=%,$(KBUILD_CFLAGS))
-endif
-
 cflags-vdso := $(ccflags-vdso) \
 	$(filter -W%,$(filter-out -Wa$(comma)%,$(KBUILD_CFLAGS))) \
 	-O2 -g -fPIC -fno-strict-aliasing -fno-common -fno-builtin -G 0 \

[PATCH 4.19 10/52] JFS: more checks for invalid superblock

[Greg Kroah-Hartman]

From: Randy Dunlap <rdunlap@infradead.org>

commit 3bef198f1b17d1bb89260bad947ef084c0a2d1a6 upstream.

syzbot is feeding invalid superblock data to JFS for mount testing.
JFS does not check several of the fields -- just assumes that they
are good since the JFS_MAGIC and version fields are good.

In this case (syzbot reproducer), we have s_l2bsize == 0xda0c,
pad == 0xf045, and s_state == 0x50, all of which are invalid IMO.
Having s_l2bsize == 0xda0c causes this UBSAN warning:
  UBSAN: shift-out-of-bounds in fs/jfs/jfs_mount.c:373:25
  shift exponent -9716 is negative

s_l2bsize can be tested for correctness. pad can be tested for non-0
and punted. s_state can be tested for its valid values and punted.

Do those 3 tests and if any of them fails, report the superblock as
invalid/corrupt and let fsck handle it.

With this patch, chkSuper() says this when JFS_DEBUG is enabled:
  jfs_mount: Mount Failure: superblock is corrupt!
  Mount JFS Failure: -22
  jfs_mount failed w/return code = -22

The obvious problem with this method is that next week there could
be another syzbot test that uses different fields for invalid values,
this making this like a game of whack-a-mole.

syzkaller link: https://syzkaller.appspot.com/bug?extid=36315852ece4132ec193

Reported-by: syzbot+36315852ece4132ec193@syzkaller.appspotmail.com
Reported-by: kernel test robot <lkp@intel.com> # v2
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Cc: jfs-discussion@lists.sourceforge.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/jfs/jfs_filsys.h |    1 +
 fs/jfs/jfs_mount.c  |   10 ++++++++++
 2 files changed, 11 insertions(+)

--- a/fs/jfs/jfs_filsys.h
+++ b/fs/jfs/jfs_filsys.h
@@ -281,5 +281,6 @@
 				 * fsck() must be run to repair
 				 */
 #define	FM_EXTENDFS 0x00000008	/* file system extendfs() in progress */
+#define	FM_STATE_MAX 0x0000000f	/* max value of s_state */
 
 #endif				/* _H_JFS_FILSYS */
--- a/fs/jfs/jfs_mount.c
+++ b/fs/jfs/jfs_mount.c
@@ -49,6 +49,7 @@
 
 #include <linux/fs.h>
 #include <linux/buffer_head.h>
+#include <linux/log2.h>
 
 #include "jfs_incore.h"
 #include "jfs_filsys.h"
@@ -378,6 +379,15 @@ static int chkSuper(struct super_block *
 	sbi->bsize = bsize;
 	sbi->l2bsize = le16_to_cpu(j_sb->s_l2bsize);
 
+	/* check some fields for possible corruption */
+	if (sbi->l2bsize != ilog2((u32)bsize) ||
+	    j_sb->pad != 0 ||
+	    le32_to_cpu(j_sb->s_state) > FM_STATE_MAX) {
+		rc = -EINVAL;
+		jfs_err("jfs_mount: Mount Failure: superblock is corrupt!");
+		goto out;
+	}
+
 	/*
 	 * For now, ignore s_pbsize, l2bfactor.  All I/O going through buffer
 	 * cache.

[PATCH 4.19 11/52] udlfb: Fix memory leak in dlfb_usb_probe

[Greg Kroah-Hartman]

From: Zqiang <qiang.zhang@windriver.com>

commit 5c0e4110f751934e748a66887c61f8e73805f0f9 upstream.

The dlfb_alloc_urb_list function is called in dlfb_usb_probe function,
after that if an error occurs, the dlfb_free_urb_list function need to
be called.

BUG: memory leak
unreferenced object 0xffff88810adde100 (size 32):
  comm "kworker/1:0", pid 17, jiffies 4294947788 (age 19.520s)
  hex dump (first 32 bytes):
    10 30 c3 0d 81 88 ff ff c0 fa 63 12 81 88 ff ff  .0........c.....
    00 30 c3 0d 81 88 ff ff 80 d1 3a 08 81 88 ff ff  .0........:.....
  backtrace:
    [<0000000019512953>] kmalloc include/linux/slab.h:552 [inline]
    [<0000000019512953>] kzalloc include/linux/slab.h:664 [inline]
    [<0000000019512953>] dlfb_alloc_urb_list drivers/video/fbdev/udlfb.c:1892 [inline]
    [<0000000019512953>] dlfb_usb_probe.cold+0x289/0x988 drivers/video/fbdev/udlfb.c:1704
    [<0000000072160152>] usb_probe_interface+0x177/0x370 drivers/usb/core/driver.c:396
    [<00000000a8d6726f>] really_probe+0x159/0x480 drivers/base/dd.c:554
    [<00000000c3ce4b0e>] driver_probe_device+0x84/0x100 drivers/base/dd.c:738
    [<00000000e942e01c>] __device_attach_driver+0xee/0x110 drivers/base/dd.c:844
    [<00000000de0a5a5c>] bus_for_each_drv+0xb7/0x100 drivers/base/bus.c:431
    [<00000000463fbcb4>] __device_attach+0x122/0x250 drivers/base/dd.c:912
    [<00000000b881a711>] bus_probe_device+0xc6/0xe0 drivers/base/bus.c:491
    [<00000000364bbda5>] device_add+0x5ac/0xc30 drivers/base/core.c:2936
    [<00000000eecca418>] usb_set_configuration+0x9de/0xb90 drivers/usb/core/message.c:2159
    [<00000000edfeca2d>] usb_generic_driver_probe+0x8c/0xc0 drivers/usb/core/generic.c:238
    [<000000001830872b>] usb_probe_device+0x5c/0x140 drivers/usb/core/driver.c:293
    [<00000000a8d6726f>] really_probe+0x159/0x480 drivers/base/dd.c:554
    [<00000000c3ce4b0e>] driver_probe_device+0x84/0x100 drivers/base/dd.c:738
    [<00000000e942e01c>] __device_attach_driver+0xee/0x110 drivers/base/dd.c:844
    [<00000000de0a5a5c>] bus_for_each_drv+0xb7/0x100 drivers/base/bus.c:431

Reported-by: syzbot+c9e365d7f450e8aa615d@syzkaller.appspotmail.com
Signed-off-by: Zqiang <qiang.zhang@windriver.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215063022.16746-1-qiang.zhang@windriver.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/video/fbdev/udlfb.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/video/fbdev/udlfb.c
+++ b/drivers/video/fbdev/udlfb.c
@@ -1020,6 +1020,7 @@ static void dlfb_ops_destroy(struct fb_i
 	}
 	vfree(dlfb->backing_buffer);
 	kfree(dlfb->edid);
+	dlfb_free_urb_list(dlfb);
 	usb_put_dev(dlfb->udev);
 	kfree(dlfb);
 

[PATCH 4.19 12/52] media: mceusb: sanity check for prescaler value

[Greg Kroah-Hartman]

From: Sean Young <sean@mess.org>

commit 9dec0f48a75e0dadca498002d25ef4e143e60194 upstream.

prescaler larger than 8 would mean the carrier is at most 152Hz,
which does not make sense for IR carriers.

Reported-by: syzbot+6d31bf169a8265204b8d@syzkaller.appspotmail.com
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/media/rc/mceusb.c |    9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

--- a/drivers/media/rc/mceusb.c
+++ b/drivers/media/rc/mceusb.c
@@ -685,11 +685,18 @@ static void mceusb_dev_printdata(struct
 				data[0], data[1]);
 			break;
 		case MCE_RSP_EQIRCFS:
+			if (!data[0] && !data[1]) {
+				dev_dbg(dev, "%s: no carrier", inout);
+				break;
+			}
+			// prescaler should make sense
+			if (data[0] > 8)
+				break;
 			period = DIV_ROUND_CLOSEST((1U << data[0] * 2) *
 						   (data[1] + 1), 10);
 			if (!period)
 				break;
-			carrier = (1000 * 1000) / period;
+			carrier = USEC_PER_SEC / period;
 			dev_dbg(dev, "%s carrier of %u Hz (period %uus)",
 				 inout, carrier, period);
 			break;

[PATCH 4.19 13/52] xfs: Fix assert failure in xfs_setattr_size()

[Greg Kroah-Hartman]

From: Yumei Huang <yuhuang@redhat.com>

commit 88a9e03beef22cc5fabea344f54b9a0dfe63de08 upstream.

An assert failure is triggered by syzkaller test due to
ATTR_KILL_PRIV is not cleared before xfs_setattr_size.
As ATTR_KILL_PRIV is not checked/used by xfs_setattr_size,
just remove it from the assert.

Signed-off-by: Yumei Huang <yuhuang@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/xfs/xfs_iops.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/xfs/xfs_iops.c
+++ b/fs/xfs/xfs_iops.c
@@ -849,7 +849,7 @@ xfs_setattr_size(
 	ASSERT(xfs_isilocked(ip, XFS_MMAPLOCK_EXCL));
 	ASSERT(S_ISREG(inode->i_mode));
 	ASSERT((iattr->ia_valid & (ATTR_UID|ATTR_GID|ATTR_ATIME|ATTR_ATIME_SET|
-		ATTR_MTIME_SET|ATTR_KILL_PRIV|ATTR_TIMES_SET)) == 0);
+		ATTR_MTIME_SET|ATTR_TIMES_SET)) == 0);
 
 	oldsize = inode->i_size;
 	newsize = iattr->ia_size;

[PATCH 4.19 14/52] smackfs: restrict bytes count in smackfs write functions

[Greg Kroah-Hartman]

From: Sabyrzhan Tasbolatov <snovitoll@gmail.com>

commit 7ef4c19d245f3dc233fd4be5acea436edd1d83d8 upstream.

syzbot found WARNINGs in several smackfs write operations where
bytes count is passed to memdup_user_nul which exceeds
GFP MAX_ORDER. Check count size if bigger than PAGE_SIZE.

Per smackfs doc, smk_write_net4addr accepts any label or -CIPSO,
smk_write_net6addr accepts any label or -DELETE. I couldn't find
any general rule for other label lengths except SMK_LABELLEN,
SMK_LONGLABEL, SMK_CIPSOMAX which are documented.

Let's constrain, in general, smackfs label lengths for PAGE_SIZE.
Although fuzzer crashes write to smackfs/netlabel on 0x400000 length.

Here is a quick way to reproduce the WARNING:
python -c "print('A' * 0x400000)" > /sys/fs/smackfs/netlabel

Reported-by: syzbot+a71a442385a0b2815497@syzkaller.appspotmail.com
Signed-off-by: Sabyrzhan Tasbolatov <snovitoll@gmail.com>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 security/smack/smackfs.c |   21 +++++++++++++++++++--
 1 file changed, 19 insertions(+), 2 deletions(-)

--- a/security/smack/smackfs.c
+++ b/security/smack/smackfs.c
@@ -1191,7 +1191,7 @@ static ssize_t smk_write_net4addr(struct
 		return -EPERM;
 	if (*ppos != 0)
 		return -EINVAL;
-	if (count < SMK_NETLBLADDRMIN)
+	if (count < SMK_NETLBLADDRMIN || count > PAGE_SIZE - 1)
 		return -EINVAL;
 
 	data = memdup_user_nul(buf, count);
@@ -1451,7 +1451,7 @@ static ssize_t smk_write_net6addr(struct
 		return -EPERM;
 	if (*ppos != 0)
 		return -EINVAL;
-	if (count < SMK_NETLBLADDRMIN)
+	if (count < SMK_NETLBLADDRMIN || count > PAGE_SIZE - 1)
 		return -EINVAL;
 
 	data = memdup_user_nul(buf, count);
@@ -1858,6 +1858,10 @@ static ssize_t smk_write_ambient(struct
 	if (!smack_privileged(CAP_MAC_ADMIN))
 		return -EPERM;
 
+	/* Enough data must be present */
+	if (count == 0 || count > PAGE_SIZE)
+		return -EINVAL;
+
 	data = memdup_user_nul(buf, count);
 	if (IS_ERR(data))
 		return PTR_ERR(data);
@@ -2029,6 +2033,9 @@ static ssize_t smk_write_onlycap(struct
 	if (!smack_privileged(CAP_MAC_ADMIN))
 		return -EPERM;
 
+	if (count > PAGE_SIZE)
+		return -EINVAL;
+
 	data = memdup_user_nul(buf, count);
 	if (IS_ERR(data))
 		return PTR_ERR(data);
@@ -2116,6 +2123,9 @@ static ssize_t smk_write_unconfined(stru
 	if (!smack_privileged(CAP_MAC_ADMIN))
 		return -EPERM;
 
+	if (count > PAGE_SIZE)
+		return -EINVAL;
+
 	data = memdup_user_nul(buf, count);
 	if (IS_ERR(data))
 		return PTR_ERR(data);
@@ -2669,6 +2679,10 @@ static ssize_t smk_write_syslog(struct f
 	if (!smack_privileged(CAP_MAC_ADMIN))
 		return -EPERM;
 
+	/* Enough data must be present */
+	if (count == 0 || count > PAGE_SIZE)
+		return -EINVAL;
+
 	data = memdup_user_nul(buf, count);
 	if (IS_ERR(data))
 		return PTR_ERR(data);
@@ -2761,10 +2775,13 @@ static ssize_t smk_write_relabel_self(st
 		return -EPERM;
 
 	/*
+	 * No partial write.
 	 * Enough data must be present.
 	 */
 	if (*ppos != 0)
 		return -EINVAL;
+	if (count == 0 || count > PAGE_SIZE)
+		return -EINVAL;
 
 	data = memdup_user_nul(buf, count);
 	if (IS_ERR(data))

[PATCH 4.19 15/52] net: fix up truesize of cloned skb in skb_prepare_for_shift()

[Greg Kroah-Hartman]

From: Marco Elver <elver@google.com>

commit 097b9146c0e26aabaa6ff3e5ea536a53f5254a79 upstream.

Avoid the assumption that ksize(kmalloc(S)) == ksize(kmalloc(S)): when
cloning an skb, save and restore truesize after pskb_expand_head(). This
can occur if the allocator decides to service an allocation of the same
size differently (e.g. use a different size class, or pass the
allocation on to KFENCE).

Because truesize is used for bookkeeping (such as sk_wmem_queued), a
modified truesize of a cloned skb may result in corrupt bookkeeping and
relevant warnings (such as in sk_stream_kill_queues()).

Link: https://lkml.kernel.org/r/X9JR/J6dMMOy1obu@elver.google.com
Reported-by: syzbot+7b99aafdcc2eedea6178@syzkaller.appspotmail.com
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20210201160420.2826895-1-elver@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/core/skbuff.c |   14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -3092,7 +3092,19 @@ EXPORT_SYMBOL(skb_split);
  */
 static int skb_prepare_for_shift(struct sk_buff *skb)
 {
-	return skb_cloned(skb) && pskb_expand_head(skb, 0, 0, GFP_ATOMIC);
+	int ret = 0;
+
+	if (skb_cloned(skb)) {
+		/* Save and restore truesize: pskb_expand_head() may reallocate
+		 * memory where ksize(kmalloc(S)) != ksize(kmalloc(S)), but we
+		 * cannot change truesize at this point.
+		 */
+		unsigned int save_truesize = skb->truesize;
+
+		ret = pskb_expand_head(skb, 0, 0, GFP_ATOMIC);
+		skb->truesize = save_truesize;
+	}
+	return ret;
 }
 
 /**

[PATCH 4.19 16/52] mm/hugetlb.c: fix unnecessary address expansion of pmd sharing

[Greg Kroah-Hartman]

From: Li Xinhai <lixinhai.lxh@gmail.com>

commit a1ba9da8f0f9a37d900ff7eff66482cf7de8015e upstream.

The current code would unnecessarily expand the address range.  Consider
one example, (start, end) = (1G-2M, 3G+2M), and (vm_start, vm_end) =
(1G-4M, 3G+4M), the expected adjustment should be keep (1G-2M, 3G+2M)
without expand.  But the current result will be (1G-4M, 3G+4M).  Actually,
the range (1G-4M, 1G) and (3G, 3G+4M) would never been involved in pmd
sharing.

After this patch, we will check that the vma span at least one PUD aligned
size and the start,end range overlap the aligned range of vma.

With above example, the aligned vma range is (1G, 3G), so if (start, end)
range is within (1G-4M, 1G), or within (3G, 3G+4M), then no adjustment to
both start and end.  Otherwise, we will have chance to adjust start
downwards or end upwards without exceeding (vm_start, vm_end).

Mike:

: The 'adjusted range' is used for calls to mmu notifiers and cache(tlb)
: flushing.  Since the current code unnecessarily expands the range in some
: cases, more entries than necessary would be flushed.  This would/could
: result in performance degradation.  However, this is highly dependent on
: the user runtime.  Is there a combination of vma layout and calls to
: actually hit this issue?  If the issue is hit, will those entries
: unnecessarily flushed be used again and need to be unnecessarily reloaded?

Link: https://lkml.kernel.org/r/20210104081631.2921415-1-lixinhai.lxh@gmail.com
Fixes: 75802ca66354 ("mm/hugetlb: fix calculation of adjust_range_if_pmd_sharing_possible")
Signed-off-by: Li Xinhai <lixinhai.lxh@gmail.com>
Suggested-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 mm/hugetlb.c |   22 ++++++++++++----------
 1 file changed, 12 insertions(+), 10 deletions(-)

--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -4706,21 +4706,23 @@ static bool vma_shareable(struct vm_area
 void adjust_range_if_pmd_sharing_possible(struct vm_area_struct *vma,
 				unsigned long *start, unsigned long *end)
 {
-	unsigned long a_start, a_end;
+	unsigned long v_start = ALIGN(vma->vm_start, PUD_SIZE),
+		v_end = ALIGN_DOWN(vma->vm_end, PUD_SIZE);
 
-	if (!(vma->vm_flags & VM_MAYSHARE))
+	/*
+	 * vma need span at least one aligned PUD size and the start,end range
+	 * must at least partialy within it.
+	 */
+	if (!(vma->vm_flags & VM_MAYSHARE) || !(v_end > v_start) ||
+		(*end <= v_start) || (*start >= v_end))
 		return;
 
 	/* Extend the range to be PUD aligned for a worst case scenario */
-	a_start = ALIGN_DOWN(*start, PUD_SIZE);
-	a_end = ALIGN(*end, PUD_SIZE);
+	if (*start > v_start)
+		*start = ALIGN_DOWN(*start, PUD_SIZE);
 
-	/*
-	 * Intersect the range with the vma range, since pmd sharing won't be
-	 * across vma after all
-	 */
-	*start = max(vma->vm_start, a_start);
-	*end = min(vma->vm_end, a_end);
+	if (*end < v_end)
+		*end = ALIGN(*end, PUD_SIZE);
 }
 
 /*

[PATCH 4.19 17/52] net: bridge: use switchdev for port flags set through sysfs too

[Greg Kroah-Hartman]

From: Vladimir Oltean <vladimir.oltean@nxp.com>

commit 8043c845b63a2dd88daf2d2d268a33e1872800f0 upstream.

Looking through patchwork I don't see that there was any consensus to
use switchdev notifiers only in case of netlink provided port flags but
not sysfs (as a sort of deprecation, punishment or anything like that),
so we should probably keep the user interface consistent in terms of
functionality.

http://patchwork.ozlabs.org/project/netdev/patch/20170605092043.3523-3-jiri@resnulli.us/
http://patchwork.ozlabs.org/project/netdev/patch/20170608064428.4785-3-jiri@resnulli.us/

Fixes: 3922285d96e7 ("net: bridge: Add support for offloading port attributes")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/bridge/br_sysfs_if.c |    9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

--- a/net/bridge/br_sysfs_if.c
+++ b/net/bridge/br_sysfs_if.c
@@ -59,9 +59,8 @@ static BRPORT_ATTR(_name, 0644,					\
 static int store_flag(struct net_bridge_port *p, unsigned long v,
 		      unsigned long mask)
 {
-	unsigned long flags;
-
-	flags = p->flags;
+	unsigned long flags = p->flags;
+	int err;
 
 	if (v)
 		flags |= mask;
@@ -69,6 +68,10 @@ static int store_flag(struct net_bridge_
 		flags &= ~mask;
 
 	if (flags != p->flags) {
+		err = br_switchdev_set_port_flag(p, flags, mask);
+		if (err)
+			return err;
+
 		p->flags = flags;
 		br_port_flags_change(p, mask);
 	}

[PATCH 4.19 18/52] dt-bindings: net: btusb: DT fix s/interrupt-name/interrupt-names/

[Greg Kroah-Hartman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

commit f288988930e93857e0375bdf88bb670c312b82eb upstream.

The standard DT property name is "interrupt-names".

Fixes: fd913ef7ce619467 ("Bluetooth: btusb: Add out-of-band wakeup support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Acked-by: Rajat Jain <rajatja@google.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 Documentation/devicetree/bindings/net/btusb.txt |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/Documentation/devicetree/bindings/net/btusb.txt
+++ b/Documentation/devicetree/bindings/net/btusb.txt
@@ -35,7 +35,7 @@ Following example uses irq pin number 3
 	compatible = "usb1286,204e";
 	reg = <1>;
 	interrupt-parent = <&gpio0>;
-	interrupt-name = "wakeup";
+	interrupt-names = "wakeup";
 	interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
     };
 };

[PATCH 4.19 19/52] rsi: Fix TX EAPOL packet handling against iwlwifi AP

[Greg Kroah-Hartman]

From: Marek Vasut <marex@denx.de>

[ Upstream commit 65277100caa2f2c62b6f3c4648b90d6f0435f3bc ]

In case RSI9116 SDIO WiFi operates in STA mode against Intel 9260 in AP mode,
the association fails. The former is using wpa_supplicant during association,
the later is set up using hostapd:

iwl$ cat hostapd.conf
interface=wlp1s0
ssid=test
country_code=DE
hw_mode=g
channel=1
wpa=2
wpa_passphrase=test
wpa_key_mgmt=WPA-PSK
iwl$ hostapd -d hostapd.conf

rsi$ wpa_supplicant -i wlan0 -c <(wpa_passphrase test test)

The problem is that the TX EAPOL data descriptor RSI_DESC_REQUIRE_CFM_TO_HOST
flag and extended descriptor EAPOL4_CONFIRM frame type are not set in case the
AP is iwlwifi, because in that case the TX EAPOL packet is 2 bytes shorter.

The downstream vendor driver has this change in place already [1], however
there is no explanation for it, neither is there any commit history from which
such explanation could be obtained.

[1] https://github.com/SiliconLabs/RS911X-nLink-OSD/blob/master/rsi/rsi_91x_hal.c#L238

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Angus Ainslie <angus@akkea.ca>
Cc: David S. Miller <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Martin Kepplinger <martink@posteo.de>
Cc: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>
Cc: Siva Rebbagondla <siva8118@gmail.com>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201015111616.429220-1-marex@denx.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/rsi/rsi_91x_hal.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/rsi/rsi_91x_hal.c b/drivers/net/wireless/rsi/rsi_91x_hal.c
index a7b341e95e76..0da95777f1c1 100644
--- a/drivers/net/wireless/rsi/rsi_91x_hal.c
+++ b/drivers/net/wireless/rsi/rsi_91x_hal.c
@@ -238,7 +238,8 @@ int rsi_prepare_data_desc(struct rsi_common *common, struct sk_buff *skb)
 			rsi_set_len_qno(&data_desc->len_qno,
 					(skb->len - FRAME_DESC_SZ),
 					RSI_WIFI_MGMT_Q);
-		if ((skb->len - header_size) == EAPOL4_PACKET_LEN) {
+		if (((skb->len - header_size) == EAPOL4_PACKET_LEN) ||
+		    ((skb->len - header_size) == EAPOL4_PACKET_LEN - 2)) {
 			data_desc->misc_flags |=
 				RSI_DESC_REQUIRE_CFM_TO_HOST;
 			xtend_desc->confirm_frame_type = EAPOL4_CONFIRM;
-- 
2.30.1

[PATCH 4.19 20/52] rsi: Move card interrupt handling to RX thread

[Greg Kroah-Hartman]

From: Marek Vasut <marex@denx.de>

[ Upstream commit 287431463e786766e05e4dc26d0a11d5f8ac8815 ]

The interrupt handling of the RS911x is particularly heavy. For each RX
packet, the card does three SDIO transactions, one to read interrupt
status register, one to RX buffer length, one to read the RX packet(s).
This translates to ~330 uS per one cycle of interrupt handler. In case
there is more incoming traffic, this will be more.

The drivers/mmc/core/sdio_irq.c has the following comment, quote "Just
like traditional hard IRQ handlers, we expect SDIO IRQ handlers to be
quick and to the point, so that the holding of the host lock does not
cover too much work that doesn't require that lock to be held."

The RS911x interrupt handler does not fit that. This patch therefore
changes it such that the entire IRQ handler is moved to the RX thread
instead, and the interrupt handler only wakes the RX thread.

This is OK, because the interrupt handler only does things which can
also be done in the RX thread, that is, it checks for firmware loading
error(s), it checks buffer status, it checks whether a packet arrived
and if so, reads out the packet and passes it to network stack.

Moreover, this change permits removal of a code which allocated an
skbuff only to get 4-byte-aligned buffer, read up to 8kiB of data
into the skbuff, queue this skbuff into local private queue, then in
RX thread, this buffer is dequeued, the data in the skbuff as passed
to the RSI driver core, and the skbuff is deallocated. All this is
replaced by directly calling the RSI driver core with local buffer.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Angus Ainslie <angus@akkea.ca>
Cc: David S. Miller <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Martin Kepplinger <martink@posteo.de>
Cc: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>
Cc: Siva Rebbagondla <siva8118@gmail.com>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Tested-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201103180941.443528-1-marex@denx.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/rsi/rsi_91x_sdio.c     |  6 +--
 drivers/net/wireless/rsi/rsi_91x_sdio_ops.c | 52 ++++++---------------
 drivers/net/wireless/rsi/rsi_sdio.h         |  8 +---
 3 files changed, 15 insertions(+), 51 deletions(-)

diff --git a/drivers/net/wireless/rsi/rsi_91x_sdio.c b/drivers/net/wireless/rsi/rsi_91x_sdio.c
index 81cc1044532d..f76a360cf1e3 100644
--- a/drivers/net/wireless/rsi/rsi_91x_sdio.c
+++ b/drivers/net/wireless/rsi/rsi_91x_sdio.c
@@ -153,9 +153,7 @@ static void rsi_handle_interrupt(struct sdio_func *function)
 	if (adapter->priv->fsm_state == FSM_FW_NOT_LOADED)
 		return;
 
-	dev->sdio_irq_task = current;
-	rsi_interrupt_handler(adapter);
-	dev->sdio_irq_task = NULL;
+	rsi_set_event(&dev->rx_thread.event);
 }
 
 /**
@@ -973,8 +971,6 @@ static int rsi_probe(struct sdio_func *pfunction,
 		rsi_dbg(ERR_ZONE, "%s: Unable to init rx thrd\n", __func__);
 		goto fail_kill_thread;
 	}
-	skb_queue_head_init(&sdev->rx_q.head);
-	sdev->rx_q.num_rx_pkts = 0;
 
 	sdio_claim_host(pfunction);
 	if (sdio_claim_irq(pfunction, rsi_handle_interrupt)) {
diff --git a/drivers/net/wireless/rsi/rsi_91x_sdio_ops.c b/drivers/net/wireless/rsi/rsi_91x_sdio_ops.c
index 612c211e21a1..d66ae2f57314 100644
--- a/drivers/net/wireless/rsi/rsi_91x_sdio_ops.c
+++ b/drivers/net/wireless/rsi/rsi_91x_sdio_ops.c
@@ -60,39 +60,20 @@ int rsi_sdio_master_access_msword(struct rsi_hw *adapter, u16 ms_word)
 	return status;
 }
 
+static void rsi_rx_handler(struct rsi_hw *adapter);
+
 void rsi_sdio_rx_thread(struct rsi_common *common)
 {
 	struct rsi_hw *adapter = common->priv;
 	struct rsi_91x_sdiodev *sdev = adapter->rsi_dev;
-	struct sk_buff *skb;
-	int status;
 
 	do {
 		rsi_wait_event(&sdev->rx_thread.event, EVENT_WAIT_FOREVER);
 		rsi_reset_event(&sdev->rx_thread.event);
+		rsi_rx_handler(adapter);
+	} while (!atomic_read(&sdev->rx_thread.thread_done));
 
-		while (true) {
-			if (atomic_read(&sdev->rx_thread.thread_done))
-				goto out;
-
-			skb = skb_dequeue(&sdev->rx_q.head);
-			if (!skb)
-				break;
-			if (sdev->rx_q.num_rx_pkts > 0)
-				sdev->rx_q.num_rx_pkts--;
-			status = rsi_read_pkt(common, skb->data, skb->len);
-			if (status) {
-				rsi_dbg(ERR_ZONE, "Failed to read the packet\n");
-				dev_kfree_skb(skb);
-				break;
-			}
-			dev_kfree_skb(skb);
-		}
-	} while (1);
-
-out:
 	rsi_dbg(INFO_ZONE, "%s: Terminated SDIO RX thread\n", __func__);
-	skb_queue_purge(&sdev->rx_q.head);
 	atomic_inc(&sdev->rx_thread.thread_done);
 	complete_and_exit(&sdev->rx_thread.completion, 0);
 }
@@ -113,10 +94,6 @@ static int rsi_process_pkt(struct rsi_common *common)
 	u32 rcv_pkt_len = 0;
 	int status = 0;
 	u8 value = 0;
-	struct sk_buff *skb;
-
-	if (dev->rx_q.num_rx_pkts >= RSI_MAX_RX_PKTS)
-		return 0;
 
 	num_blks = ((adapter->interrupt_status & 1) |
 			((adapter->interrupt_status >> RECV_NUM_BLOCKS) << 1));
@@ -144,22 +121,19 @@ static int rsi_process_pkt(struct rsi_common *common)
 
 	rcv_pkt_len = (num_blks * 256);
 
-	skb = dev_alloc_skb(rcv_pkt_len);
-	if (!skb)
-		return -ENOMEM;
-
-	status = rsi_sdio_host_intf_read_pkt(adapter, skb->data, rcv_pkt_len);
+	status = rsi_sdio_host_intf_read_pkt(adapter, dev->pktbuffer,
+					     rcv_pkt_len);
 	if (status) {
 		rsi_dbg(ERR_ZONE, "%s: Failed to read packet from card\n",
 			__func__);
-		dev_kfree_skb(skb);
 		return status;
 	}
-	skb_put(skb, rcv_pkt_len);
-	skb_queue_tail(&dev->rx_q.head, skb);
-	dev->rx_q.num_rx_pkts++;
 
-	rsi_set_event(&dev->rx_thread.event);
+	status = rsi_read_pkt(common, dev->pktbuffer, rcv_pkt_len);
+	if (status) {
+		rsi_dbg(ERR_ZONE, "Failed to read the packet\n");
+		return status;
+	}
 
 	return 0;
 }
@@ -251,12 +225,12 @@ int rsi_init_sdio_slave_regs(struct rsi_hw *adapter)
 }
 
 /**
- * rsi_interrupt_handler() - This function read and process SDIO interrupts.
+ * rsi_rx_handler() - Read and process SDIO interrupts.
  * @adapter: Pointer to the adapter structure.
  *
  * Return: None.
  */
-void rsi_interrupt_handler(struct rsi_hw *adapter)
+static void rsi_rx_handler(struct rsi_hw *adapter)
 {
 	struct rsi_common *common = adapter->priv;
 	struct rsi_91x_sdiodev *dev =
diff --git a/drivers/net/wireless/rsi/rsi_sdio.h b/drivers/net/wireless/rsi/rsi_sdio.h
index 66dcd2ec9051..fd11f16fc74f 100644
--- a/drivers/net/wireless/rsi/rsi_sdio.h
+++ b/drivers/net/wireless/rsi/rsi_sdio.h
@@ -110,11 +110,6 @@ struct receive_info {
 	u32 buf_available_counter;
 };
 
-struct rsi_sdio_rx_q {
-	u8 num_rx_pkts;
-	struct sk_buff_head head;
-};
-
 struct rsi_91x_sdiodev {
 	struct sdio_func *pfunction;
 	struct task_struct *sdio_irq_task;
@@ -127,11 +122,10 @@ struct rsi_91x_sdiodev {
 	u16 tx_blk_size;
 	u8 write_fail;
 	bool buff_status_updated;
-	struct rsi_sdio_rx_q rx_q;
 	struct rsi_thread rx_thread;
+	u8 pktbuffer[8192] __aligned(4);
 };
 
-void rsi_interrupt_handler(struct rsi_hw *adapter);
 int rsi_init_sdio_slave_regs(struct rsi_hw *adapter);
 int rsi_sdio_read_register(struct rsi_hw *adapter, u32 addr, u8 *data);
 int rsi_sdio_host_intf_read_pkt(struct rsi_hw *adapter, u8 *pkt, u32 length);
-- 
2.30.1

[PATCH 4.19 21/52] staging: fwserial: Fix error handling in fwserial_create

[Greg Kroah-Hartman]

From: Dinghao Liu <dinghao.liu@zju.edu.cn>

[ Upstream commit f31559af97a0eabd467e4719253675b7dccb8a46 ]

When fw_core_add_address_handler() fails, we need to destroy
the port by tty_port_destroy(). Also we need to unregister
the address handler by fw_core_remove_address_handler() on
failure.

Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Link: https://lore.kernel.org/r/20201221122437.10274-1-dinghao.liu@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/fwserial/fwserial.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/staging/fwserial/fwserial.c b/drivers/staging/fwserial/fwserial.c
index fa0dd425b454..cd062628a46b 100644
--- a/drivers/staging/fwserial/fwserial.c
+++ b/drivers/staging/fwserial/fwserial.c
@@ -2219,6 +2219,7 @@ static int fwserial_create(struct fw_unit *unit)
 		err = fw_core_add_address_handler(&port->rx_handler,
 						  &fw_high_memory_region);
 		if (err) {
+			tty_port_destroy(&port->port);
 			kfree(port);
 			goto free_ports;
 		}
@@ -2301,6 +2302,7 @@ unregister_ttys:
 
 free_ports:
 	for (--i; i >= 0; --i) {
+		fw_core_remove_address_handler(&serial->ports[i]->rx_handler);
 		tty_port_destroy(&serial->ports[i]->port);
 		kfree(serial->ports[i]);
 	}
-- 
2.30.1

[PATCH 4.19 22/52] x86/reboot: Add Zotac ZBOX CI327 nano PCI reboot quirk

[Greg Kroah-Hartman]

From: Heiner Kallweit <hkallweit1@gmail.com>

[ Upstream commit 4b2d8ca9208be636b30e924b1cbcb267b0740c93 ]

On this system the M.2 PCIe WiFi card isn't detected after reboot, only
after cold boot. reboot=pci fixes this behavior. In [0] the same issue
is described, although on another system and with another Intel WiFi
card. In case it's relevant, both systems have Celeron CPUs.

Add a PCI reboot quirk on affected systems until a more generic fix is
available.

[0] https://bugzilla.kernel.org/show_bug.cgi?id=202399

 [ bp: Massage commit message. ]

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/1524eafd-f89c-cfa4-ed70-0bde9e45eec9@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kernel/reboot.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c
index a19706bee687..6489cc19ed06 100644
--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -477,6 +477,15 @@ static const struct dmi_system_id reboot_dmi_table[] __initconst = {
 		},
 	},
 
+	{	/* PCIe Wifi card isn't detected after reboot otherwise */
+		.callback = set_pci_reboot,
+		.ident = "Zotac ZBOX CI327 nano",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "NA"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "ZBOX-CI327NANO-GS-01"),
+		},
+	},
+
 	/* Sony */
 	{	/* Handle problems with rebooting on Sony VGN-Z540N */
 		.callback = set_bios_reboot,
-- 
2.30.1

[PATCH 4.19 23/52] vt/consolemap: do font sum unsigned

[Greg Kroah-Hartman]

From: Jiri Slaby <jslaby@suse.cz>

[ Upstream commit 9777f8e60e718f7b022a94f2524f967d8def1931 ]

The constant 20 makes the font sum computation signed which can lead to
sign extensions and signed wraps. It's not much of a problem as we build
with -fno-strict-overflow. But if we ever decide not to, be ready, so
switch the constant to unsigned.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210105120239.28031-7-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/vt/consolemap.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/tty/vt/consolemap.c b/drivers/tty/vt/consolemap.c
index 7c7ada0b3ea0..90c6e10b1ef9 100644
--- a/drivers/tty/vt/consolemap.c
+++ b/drivers/tty/vt/consolemap.c
@@ -495,7 +495,7 @@ con_insert_unipair(struct uni_pagedir *p, u_short unicode, u_short fontpos)
 
 	p2[unicode & 0x3f] = fontpos;
 	
-	p->sum += (fontpos << 20) + unicode;
+	p->sum += (fontpos << 20U) + unicode;
 
 	return 0;
 }
-- 
2.30.1

[PATCH 4.19 24/52] wlcore: Fix command execute failure 19 for wl12xx

[Greg Kroah-Hartman]

From: Tony Lindgren <tony@atomide.com>

[ Upstream commit cb88d01b67383a095e3f7caeb4cdade5a6cf0417 ]

We can currently get a "command execute failure 19" error on beacon loss
if the signal is weak:

wlcore: Beacon loss detected. roles:0xff
wlcore: Connection loss work (role_id: 0).
...
wlcore: ERROR command execute failure 19
...
WARNING: CPU: 0 PID: 1552 at drivers/net/wireless/ti/wlcore/main.c:803
...
(wl12xx_queue_recovery_work.part.0 [wlcore])
(wl12xx_cmd_role_start_sta [wlcore])
(wl1271_op_bss_info_changed [wlcore])
(ieee80211_prep_connection [mac80211])

Error 19 is defined as CMD_STATUS_WRONG_NESTING from the wlcore firmware,
and seems to mean that the firmware no longer wants to see the quirk
handling for WLCORE_QUIRK_START_STA_FAILS done.

This quirk got added with commit 18eab430700d ("wlcore: workaround
start_sta problem in wl12xx fw"), and it seems that this already got fixed
in the firmware long time ago back in 2012 as wl18xx never had this quirk
in place to start with.

As we no longer even support firmware that early, to me it seems that it's
safe to just drop WLCORE_QUIRK_START_STA_FAILS to fix the error. Looks
like earlier firmware got disabled back in 2013 with commit 0e284c074ef9
("wl12xx: increase minimum singlerole firmware version required").

If it turns out we still need WLCORE_QUIRK_START_STA_FAILS with any
firmware that the driver works with, we can simply revert this patch and
add extra checks for firmware version used.

With this fix wlcore reconnects properly after a beacon loss.

Cc: Raz Bouganim <r-bouganim@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210115065613.7731-1-tony@atomide.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ti/wl12xx/main.c   |  3 ---
 drivers/net/wireless/ti/wlcore/main.c   | 15 +--------------
 drivers/net/wireless/ti/wlcore/wlcore.h |  3 ---
 3 files changed, 1 insertion(+), 20 deletions(-)

diff --git a/drivers/net/wireless/ti/wl12xx/main.c b/drivers/net/wireless/ti/wl12xx/main.c
index 4a4f797bb10f..e10fff42751e 100644
--- a/drivers/net/wireless/ti/wl12xx/main.c
+++ b/drivers/net/wireless/ti/wl12xx/main.c
@@ -649,7 +649,6 @@ static int wl12xx_identify_chip(struct wl1271 *wl)
 		wl->quirks |= WLCORE_QUIRK_LEGACY_NVS |
 			      WLCORE_QUIRK_DUAL_PROBE_TMPL |
 			      WLCORE_QUIRK_TKIP_HEADER_SPACE |
-			      WLCORE_QUIRK_START_STA_FAILS |
 			      WLCORE_QUIRK_AP_ZERO_SESSION_ID;
 		wl->sr_fw_name = WL127X_FW_NAME_SINGLE;
 		wl->mr_fw_name = WL127X_FW_NAME_MULTI;
@@ -673,7 +672,6 @@ static int wl12xx_identify_chip(struct wl1271 *wl)
 		wl->quirks |= WLCORE_QUIRK_LEGACY_NVS |
 			      WLCORE_QUIRK_DUAL_PROBE_TMPL |
 			      WLCORE_QUIRK_TKIP_HEADER_SPACE |
-			      WLCORE_QUIRK_START_STA_FAILS |
 			      WLCORE_QUIRK_AP_ZERO_SESSION_ID;
 		wl->plt_fw_name = WL127X_PLT_FW_NAME;
 		wl->sr_fw_name = WL127X_FW_NAME_SINGLE;
@@ -702,7 +700,6 @@ static int wl12xx_identify_chip(struct wl1271 *wl)
 		wl->quirks |= WLCORE_QUIRK_TX_BLOCKSIZE_ALIGN |
 			      WLCORE_QUIRK_DUAL_PROBE_TMPL |
 			      WLCORE_QUIRK_TKIP_HEADER_SPACE |
-			      WLCORE_QUIRK_START_STA_FAILS |
 			      WLCORE_QUIRK_AP_ZERO_SESSION_ID;
 
 		wlcore_set_min_fw_ver(wl, WL128X_CHIP_VER,
diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c
index 43c7b37dec0c..e24ffdff5bdc 100644
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -2875,21 +2875,8 @@ static int wlcore_join(struct wl1271 *wl, struct wl12xx_vif *wlvif)
 
 	if (is_ibss)
 		ret = wl12xx_cmd_role_start_ibss(wl, wlvif);
-	else {
-		if (wl->quirks & WLCORE_QUIRK_START_STA_FAILS) {
-			/*
-			 * TODO: this is an ugly workaround for wl12xx fw
-			 * bug - we are not able to tx/rx after the first
-			 * start_sta, so make dummy start+stop calls,
-			 * and then call start_sta again.
-			 * this should be fixed in the fw.
-			 */
-			wl12xx_cmd_role_start_sta(wl, wlvif);
-			wl12xx_cmd_role_stop_sta(wl, wlvif);
-		}
-
+	else
 		ret = wl12xx_cmd_role_start_sta(wl, wlvif);
-	}
 
 	return ret;
 }
diff --git a/drivers/net/wireless/ti/wlcore/wlcore.h b/drivers/net/wireless/ti/wlcore/wlcore.h
index d4b1f66ef457..af7cf70b3832 100644
--- a/drivers/net/wireless/ti/wlcore/wlcore.h
+++ b/drivers/net/wireless/ti/wlcore/wlcore.h
@@ -559,9 +559,6 @@ wlcore_set_min_fw_ver(struct wl1271 *wl, unsigned int chip,
 /* Each RX/TX transaction requires an end-of-transaction transfer */
 #define WLCORE_QUIRK_END_OF_TRANSACTION		BIT(0)
 
-/* the first start_role(sta) sometimes doesn't work on wl12xx */
-#define WLCORE_QUIRK_START_STA_FAILS		BIT(1)
-
 /* wl127x and SPI don't support SDIO block size alignment */
 #define WLCORE_QUIRK_TX_BLOCKSIZE_ALIGN		BIT(2)
 
-- 
2.30.1

[PATCH 4.19 25/52] Bluetooth: hci_h5: Set HCI_QUIRK_SIMULTANEOUS_DISCOVERY for btrtl

[Greg Kroah-Hartman]

From: Claire Chang <tientzu@chromium.org>

[ Upstream commit 7f9f2c3f7d99b8ae773459c74ac5e99a0dd46db9 ]

Realtek Bluetooth controllers can do both LE scan and BR/EDR inquiry
at once, need to set HCI_QUIRK_SIMULTANEOUS_DISCOVERY quirk.

Signed-off-by: Claire Chang <tientzu@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/bluetooth/hci_h5.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/bluetooth/hci_h5.c b/drivers/bluetooth/hci_h5.c
index 7ffeb37e8f20..79b96251de80 100644
--- a/drivers/bluetooth/hci_h5.c
+++ b/drivers/bluetooth/hci_h5.c
@@ -885,6 +885,11 @@ static int h5_btrtl_setup(struct h5 *h5)
 	/* Give the device some time before the hci-core sends it a reset */
 	usleep_range(10000, 20000);
 
+	/* Enable controller to do both LE scan and BR/EDR inquiry
+	 * simultaneously.
+	 */
+	set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &h5->hu->hdev->quirks);
+
 out_free:
 	btrtl_free(btrtl_dev);
 
-- 
2.30.1

[PATCH 4.19 26/52] pktgen: fix misuse of BUG_ON() in pktgen_thread_worker()

[Greg Kroah-Hartman]

From: Di Zhu <zhudi21@huawei.com>

[ Upstream commit 275b1e88cabb34dbcbe99756b67e9939d34a99b6 ]

pktgen create threads for all online cpus and bond these threads to
relevant cpu repecivtily. when this thread firstly be woken up, it
will compare cpu currently running with the cpu specified at the time
of creation and if the two cpus are not equal, BUG_ON() will take effect
causing panic on the system.
Notice that these threads could be migrated to other cpus before start
running because of the cpu hotplug after these threads have created. so the
BUG_ON() used here seems unreasonable and we can replace it with WARN_ON()
to just printf a warning other than panic the system.

Signed-off-by: Di Zhu <zhudi21@huawei.com>
Link: https://lore.kernel.org/r/20210125124229.19334-1-zhudi21@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/core/pktgen.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/core/pktgen.c b/net/core/pktgen.c
index 092fa3d75b32..3714cd9e3111 100644
--- a/net/core/pktgen.c
+++ b/net/core/pktgen.c
@@ -3471,7 +3471,7 @@ static int pktgen_thread_worker(void *arg)
 	struct pktgen_dev *pkt_dev = NULL;
 	int cpu = t->cpu;
 
-	BUG_ON(smp_processor_id() != cpu);
+	WARN_ON(smp_processor_id() != cpu);
 
 	init_waitqueue_head(&t->queue);
 	complete(&t->start_done);
-- 
2.30.1

[PATCH 4.19 27/52] ath10k: fix wmi mgmt tx queue full due to race condition

[Greg Kroah-Hartman]

From: Miaoqing Pan <miaoqing@codeaurora.org>

[ Upstream commit b55379e343a3472c35f4a1245906db5158cab453 ]

Failed to transmit wmi management frames:

[84977.840894] ath10k_snoc a000000.wifi: wmi mgmt tx queue is full
[84977.840913] ath10k_snoc a000000.wifi: failed to transmit packet, dropping: -28
[84977.840924] ath10k_snoc a000000.wifi: failed to submit frame: -28
[84977.840932] ath10k_snoc a000000.wifi: failed to transmit frame: -28

This issue is caused by race condition between skb_dequeue and
__skb_queue_tail. The queue of ‘wmi_mgmt_tx_queue’ is protected by a
different lock: ar->data_lock vs list->lock, the result is no protection.
So when ath10k_mgmt_over_wmi_tx_work() and ath10k_mac_tx_wmi_mgmt()
running concurrently on different CPUs, there appear to be a rare corner
cases when the queue length is 1,

  CPUx (skb_deuque)			CPUy (__skb_queue_tail)
					next=list
					prev=list
  struct sk_buff *skb = skb_peek(list);	WRITE_ONCE(newsk->next, next);
  WRITE_ONCE(list->qlen, list->qlen - 1);WRITE_ONCE(newsk->prev, prev);
  next       = skb->next;		WRITE_ONCE(next->prev, newsk);
  prev       = skb->prev;		WRITE_ONCE(prev->next, newsk);
  skb->next  = skb->prev = NULL;	list->qlen++;
  WRITE_ONCE(next->prev, prev);
  WRITE_ONCE(prev->next, next);

If the instruction ‘next = skb->next’ is executed before
‘WRITE_ONCE(prev->next, newsk)’, newsk will be lost, as CPUx get the
old ‘next’ pointer, but the length is still added by one. The final
result is the length of the queue will reach the maximum value but
the queue is empty.

So remove ar->data_lock, and use 'skb_queue_tail' instead of
'__skb_queue_tail' to prevent the potential race condition. Also switch
to use skb_queue_len_lockless, in case we queue a few SKBs simultaneously.

Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.3.1.c2-00033-QCAHLSWMTPLZ-1

Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1608618887-8857-1-git-send-email-miaoqing@codeaurora.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/mac.c | 15 ++++-----------
 1 file changed, 4 insertions(+), 11 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index faaca7fe9ad1..f32d35e03708 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -3567,23 +3567,16 @@ bool ath10k_mac_tx_frm_has_freq(struct ath10k *ar)
 static int ath10k_mac_tx_wmi_mgmt(struct ath10k *ar, struct sk_buff *skb)
 {
 	struct sk_buff_head *q = &ar->wmi_mgmt_tx_queue;
-	int ret = 0;
-
-	spin_lock_bh(&ar->data_lock);
 
-	if (skb_queue_len(q) == ATH10K_MAX_NUM_MGMT_PENDING) {
+	if (skb_queue_len_lockless(q) >= ATH10K_MAX_NUM_MGMT_PENDING) {
 		ath10k_warn(ar, "wmi mgmt tx queue is full\n");
-		ret = -ENOSPC;
-		goto unlock;
+		return -ENOSPC;
 	}
 
-	__skb_queue_tail(q, skb);
+	skb_queue_tail(q, skb);
 	ieee80211_queue_work(ar->hw, &ar->wmi_mgmt_tx_work);
 
-unlock:
-	spin_unlock_bh(&ar->data_lock);
-
-	return ret;
+	return 0;
 }
 
 static enum ath10k_mac_tx_path
-- 
2.30.1

[PATCH 4.19 28/52] x86/build: Treat R_386_PLT32 relocation as R_386_PC32

[Greg Kroah-Hartman]

From: Fangrui Song <maskray@google.com>

[ Upstream commit bb73d07148c405c293e576b40af37737faf23a6a ]

This is similar to commit

  b21ebf2fb4cd ("x86: Treat R_X86_64_PLT32 as R_X86_64_PC32")

but for i386. As far as the kernel is concerned, R_386_PLT32 can be
treated the same as R_386_PC32.

R_386_PLT32/R_X86_64_PLT32 are PC-relative relocation types which
can only be used by branches. If the referenced symbol is defined
externally, a PLT will be used.

R_386_PC32/R_X86_64_PC32 are PC-relative relocation types which can be
used by address taking operations and branches. If the referenced symbol
is defined externally, a copy relocation/canonical PLT entry will be
created in the executable.

On x86-64, there is no PIC vs non-PIC PLT distinction and an
R_X86_64_PLT32 relocation is produced for both `call/jmp foo` and
`call/jmp foo@PLT` with newer (2018) GNU as/LLVM integrated assembler.
This avoids canonical PLT entries (st_shndx=0, st_value!=0).

On i386, there are 2 types of PLTs, PIC and non-PIC. Currently,
the GCC/GNU as convention is to use R_386_PC32 for non-PIC PLT and
R_386_PLT32 for PIC PLT. Copy relocations/canonical PLT entries
are possible ABI issues but GCC/GNU as will likely keep the status
quo because (1) the ABI is legacy (2) the change will drop a GNU
ld diagnostic for non-default visibility ifunc in shared objects.

clang-12 -fno-pic (since [1]) can emit R_386_PLT32 for compiler
generated function declarations, because preventing canonical PLT
entries is weighed over the rare ifunc diagnostic.

Further info for the more interested:

  https://github.com/ClangBuiltLinux/linux/issues/1210
  https://sourceware.org/bugzilla/show_bug.cgi?id=27169
  https://github.com/llvm/llvm-project/commit/a084c0388e2a59b9556f2de0083333232da3f1d6 [1]

 [ bp: Massage commit message. ]

Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Fangrui Song <maskray@google.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Link: https://lkml.kernel.org/r/20210127205600.1227437-1-maskray@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kernel/module.c |  1 +
 arch/x86/tools/relocs.c  | 12 ++++++++----
 2 files changed, 9 insertions(+), 4 deletions(-)

diff --git a/arch/x86/kernel/module.c b/arch/x86/kernel/module.c
index 6645f123419c..9f0be2c7e346 100644
--- a/arch/x86/kernel/module.c
+++ b/arch/x86/kernel/module.c
@@ -126,6 +126,7 @@ int apply_relocate(Elf32_Shdr *sechdrs,
 			*location += sym->st_value;
 			break;
 		case R_386_PC32:
+		case R_386_PLT32:
 			/* Add the value, subtract its position */
 			*location += sym->st_value - (uint32_t)location;
 			break;
diff --git a/arch/x86/tools/relocs.c b/arch/x86/tools/relocs.c
index 3a6c8ebc8032..aa046d46ff8f 100644
--- a/arch/x86/tools/relocs.c
+++ b/arch/x86/tools/relocs.c
@@ -841,9 +841,11 @@ static int do_reloc32(struct section *sec, Elf_Rel *rel, Elf_Sym *sym,
 	case R_386_PC32:
 	case R_386_PC16:
 	case R_386_PC8:
+	case R_386_PLT32:
 		/*
-		 * NONE can be ignored and PC relative relocations don't
-		 * need to be adjusted.
+		 * NONE can be ignored and PC relative relocations don't need
+		 * to be adjusted. Because sym must be defined, R_386_PLT32 can
+		 * be treated the same way as R_386_PC32.
 		 */
 		break;
 
@@ -884,9 +886,11 @@ static int do_reloc_real(struct section *sec, Elf_Rel *rel, Elf_Sym *sym,
 	case R_386_PC32:
 	case R_386_PC16:
 	case R_386_PC8:
+	case R_386_PLT32:
 		/*
-		 * NONE can be ignored and PC relative relocations don't
-		 * need to be adjusted.
+		 * NONE can be ignored and PC relative relocations don't need
+		 * to be adjusted. Because sym must be defined, R_386_PLT32 can
+		 * be treated the same way as R_386_PC32.
 		 */
 		break;
 
-- 
2.30.1

[PATCH 4.19 29/52] Bluetooth: Fix null pointer dereference in amp_read_loc_assoc_final_data

[Greg Kroah-Hartman]

From: Gopal Tiwari <gtiwari@redhat.com>

[ Upstream commit e8bd76ede155fd54d8c41d045dda43cd3174d506 ]

kernel panic trace looks like:

 #5 [ffffb9e08698fc80] do_page_fault at ffffffffb666e0d7
 #6 [ffffb9e08698fcb0] page_fault at ffffffffb70010fe
    [exception RIP: amp_read_loc_assoc_final_data+63]
    RIP: ffffffffc06ab54f  RSP: ffffb9e08698fd68  RFLAGS: 00010246
    RAX: 0000000000000000  RBX: ffff8c8845a5a000  RCX: 0000000000000004
    RDX: 0000000000000000  RSI: ffff8c8b9153d000  RDI: ffff8c8845a5a000
    RBP: ffffb9e08698fe40   R8: 00000000000330e0   R9: ffffffffc0675c94
    R10: ffffb9e08698fe58  R11: 0000000000000001  R12: ffff8c8b9cbf6200
    R13: 0000000000000000  R14: 0000000000000000  R15: ffff8c8b2026da0b
    ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018
 #7 [ffffb9e08698fda8] hci_event_packet at ffffffffc0676904 [bluetooth]
 #8 [ffffb9e08698fe50] hci_rx_work at ffffffffc06629ac [bluetooth]
 #9 [ffffb9e08698fe98] process_one_work at ffffffffb66f95e7

hcon->amp_mgr seems NULL triggered kernel panic in following line inside
function amp_read_loc_assoc_final_data

        set_bit(READ_LOC_AMP_ASSOC_FINAL, &mgr->state);

Fixed by checking NULL for mgr.

Signed-off-by: Gopal Tiwari <gtiwari@redhat.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bluetooth/amp.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/net/bluetooth/amp.c b/net/bluetooth/amp.c
index 78bec8df8525..72ef967c5663 100644
--- a/net/bluetooth/amp.c
+++ b/net/bluetooth/amp.c
@@ -305,6 +305,9 @@ void amp_read_loc_assoc_final_data(struct hci_dev *hdev,
 	struct hci_request req;
 	int err;
 
+	if (!mgr)
+		return;
+
 	cp.phy_handle = hcon->handle;
 	cp.len_so_far = cpu_to_le16(0);
 	cp.max_len = cpu_to_le16(hdev->amp_assoc_size);
-- 
2.30.1

[PATCH 4.19 30/52] staging: most: sound: add sanity check for function argument

[Greg Kroah-Hartman]

From: Christian Gromm <christian.gromm@microchip.com>

[ Upstream commit 45b754ae5b82949dca2b6e74fa680313cefdc813 ]

This patch checks the function parameter 'bytes' before doing the
subtraction to prevent memory corruption.

Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/1612282865-21846-1-git-send-email-christian.gromm@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/most/sound/sound.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/staging/most/sound/sound.c b/drivers/staging/most/sound/sound.c
index 89b02fc305b8..fd9245d7eeb9 100644
--- a/drivers/staging/most/sound/sound.c
+++ b/drivers/staging/most/sound/sound.c
@@ -86,6 +86,8 @@ static void swap_copy24(u8 *dest, const u8 *source, unsigned int bytes)
 {
 	unsigned int i = 0;
 
+	if (bytes < 2)
+		return;
 	while (i < bytes - 2) {
 		dest[i] = source[i + 2];
 		dest[i + 1] = source[i + 1];
-- 
2.30.1

[PATCH 4.19 31/52] crypto: tcrypt - avoid signed overflow in byte count

[Greg Kroah-Hartman]

From: Ard Biesheuvel <ardb@kernel.org>

[ Upstream commit 303fd3e1c771077e32e96e5788817f025f0067e2 ]

The signed long type used for printing the number of bytes processed in
tcrypt benchmarks limits the range to -/+ 2 GiB, which is not sufficient
to cover the performance of common accelerated ciphers such as AES-NI
when benchmarked with sec=1. So switch to u64 instead.

While at it, fix up a missing printk->pr_cont conversion in the AEAD
benchmark.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 crypto/tcrypt.c | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/crypto/tcrypt.c b/crypto/tcrypt.c
index d332988eb8de..bf797c613ba2 100644
--- a/crypto/tcrypt.c
+++ b/crypto/tcrypt.c
@@ -202,8 +202,8 @@ static int test_mb_aead_jiffies(struct test_mb_aead_data *data, int enc,
 			goto out;
 	}
 
-	pr_cont("%d operations in %d seconds (%ld bytes)\n",
-		bcount * num_mb, secs, (long)bcount * blen * num_mb);
+	pr_cont("%d operations in %d seconds (%llu bytes)\n",
+		bcount * num_mb, secs, (u64)bcount * blen * num_mb);
 
 out:
 	kfree(rc);
@@ -472,8 +472,8 @@ static int test_aead_jiffies(struct aead_request *req, int enc,
 			return ret;
 	}
 
-	printk("%d operations in %d seconds (%ld bytes)\n",
-	       bcount, secs, (long)bcount * blen);
+	pr_cont("%d operations in %d seconds (%llu bytes)\n",
+	        bcount, secs, (u64)bcount * blen);
 	return 0;
 }
 
@@ -763,8 +763,8 @@ static int test_mb_ahash_jiffies(struct test_mb_ahash_data *data, int blen,
 			goto out;
 	}
 
-	pr_cont("%d operations in %d seconds (%ld bytes)\n",
-		bcount * num_mb, secs, (long)bcount * blen * num_mb);
+	pr_cont("%d operations in %d seconds (%llu bytes)\n",
+		bcount * num_mb, secs, (u64)bcount * blen * num_mb);
 
 out:
 	kfree(rc);
@@ -1200,8 +1200,8 @@ static int test_mb_acipher_jiffies(struct test_mb_skcipher_data *data, int enc,
 			goto out;
 	}
 
-	pr_cont("%d operations in %d seconds (%ld bytes)\n",
-		bcount * num_mb, secs, (long)bcount * blen * num_mb);
+	pr_cont("%d operations in %d seconds (%llu bytes)\n",
+		bcount * num_mb, secs, (u64)bcount * blen * num_mb);
 
 out:
 	kfree(rc);
@@ -1438,8 +1438,8 @@ static int test_acipher_jiffies(struct skcipher_request *req, int enc,
 			return ret;
 	}
 
-	pr_cont("%d operations in %d seconds (%ld bytes)\n",
-		bcount, secs, (long)bcount * blen);
+	pr_cont("%d operations in %d seconds (%llu bytes)\n",
+		bcount, secs, (u64)bcount * blen);
 	return 0;
 }
 
-- 
2.30.1

[PATCH 4.19 32/52] PCI: Add a REBAR size quirk for Sapphire RX 5600 XT Pulse

[Greg Kroah-Hartman]

From: Nirmoy Das <nirmoy.das@amd.com>

[ Upstream commit 907830b0fc9e374d00f3c83de5e426157b482c01 ]

RX 5600 XT Pulse advertises support for BAR 0 being 256MB, 512MB,
or 1GB, but it also supports 2GB, 4GB, and 8GB. Add a rebar
size quirk so that the BAR 0 is big enough to cover complete VARM.

Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20210107175017.15893-5-nirmoy.das@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/pci.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index cd628dd73719..83fda1987d1f 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -3361,7 +3361,14 @@ u32 pci_rebar_get_possible_sizes(struct pci_dev *pdev, int bar)
 		return 0;
 
 	pci_read_config_dword(pdev, pos + PCI_REBAR_CAP, &cap);
-	return (cap & PCI_REBAR_CAP_SIZES) >> 4;
+	cap &= PCI_REBAR_CAP_SIZES;
+
+	/* Sapphire RX 5600 XT Pulse has an invalid cap dword for BAR 0 */
+	if (pdev->vendor == PCI_VENDOR_ID_ATI && pdev->device == 0x731f &&
+	    bar == 0 && cap == 0x7000)
+		cap = 0x3f000;
+
+	return cap >> 4;
 }
 
 /**
-- 
2.30.1

[PATCH 4.19 33/52] drm/amd/display: Guard against NULL pointer deref when get_i2c_info fails

[Greg Kroah-Hartman]

From: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>

[ Upstream commit 44a09e3d95bd2b7b0c224100f78f335859c4e193 ]

[Why]
If the BIOS table is invalid or corrupt then get_i2c_info can fail
and we dereference a NULL pointer.

[How]
Check that ddc_pin is not NULL before using it and log an error if it
is because this is unexpected.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Anson Jacob <anson.jacob@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/core/dc_link.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link.c b/drivers/gpu/drm/amd/display/dc/core/dc_link.c
index fa0e6c8e2447..e3bedf4cc9c0 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link.c
@@ -1124,6 +1124,11 @@ static bool construct(
 		goto ddc_create_fail;
 	}
 
+	if (!link->ddc->ddc_pin) {
+		DC_ERROR("Failed to get I2C info for connector!\n");
+		goto ddc_create_fail;
+	}
+
 	link->ddc_hw_inst =
 		dal_ddc_get_line(
 			dal_ddc_service_get_ddc_pin(link->ddc));
-- 
2.30.1

[PATCH 4.19 34/52] media: uvcvideo: Allow entities with no pads

[Greg Kroah-Hartman]

From: Ricardo Ribalda <ribalda@chromium.org>

[ Upstream commit 7532dad6634031d083df7af606fac655b8d08b5c ]

Avoid an underflow while calculating the number of inputs for entities
with zero pads.

Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/usb/uvc/uvc_driver.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/media/usb/uvc/uvc_driver.c b/drivers/media/usb/uvc/uvc_driver.c
index 38c73cdbef70..998ce712978a 100644
--- a/drivers/media/usb/uvc/uvc_driver.c
+++ b/drivers/media/usb/uvc/uvc_driver.c
@@ -940,7 +940,10 @@ static struct uvc_entity *uvc_alloc_entity(u16 type, u8 id,
 	unsigned int i;
 
 	extra_size = roundup(extra_size, sizeof(*entity->pads));
-	num_inputs = (type & UVC_TERM_OUTPUT) ? num_pads : num_pads - 1;
+	if (num_pads)
+		num_inputs = type & UVC_TERM_OUTPUT ? num_pads : num_pads - 1;
+	else
+		num_inputs = 0;
 	size = sizeof(*entity) + extra_size + sizeof(*entity->pads) * num_pads
 	     + num_inputs;
 	entity = kzalloc(size, GFP_KERNEL);
@@ -956,7 +959,7 @@ static struct uvc_entity *uvc_alloc_entity(u16 type, u8 id,
 
 	for (i = 0; i < num_inputs; ++i)
 		entity->pads[i].flags = MEDIA_PAD_FL_SINK;
-	if (!UVC_ENTITY_IS_OTERM(entity))
+	if (!UVC_ENTITY_IS_OTERM(entity) && num_pads)
 		entity->pads[num_pads-1].flags = MEDIA_PAD_FL_SOURCE;
 
 	entity->bNrInPins = num_inputs;
-- 
2.30.1

[PATCH 4.19 35/52] f2fs: handle unallocated section and zone on pinned/atgc

[Greg Kroah-Hartman]

From: Jaegeuk Kim <jaegeuk@kernel.org>

[ Upstream commit 632faca72938f9f63049e48a8c438913828ac7a9 ]

If we have large section/zone, unallocated segment makes them corrupted.

E.g.,

  - Pinned file:       -1 119304647 119304647
  - ATGC   data:       -1 119304647 119304647

Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/f2fs/segment.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/fs/f2fs/segment.h b/fs/f2fs/segment.h
index 9c2a55ad61bc..1f5db4cbc499 100644
--- a/fs/f2fs/segment.h
+++ b/fs/f2fs/segment.h
@@ -91,11 +91,11 @@
 #define BLKS_PER_SEC(sbi)					\
 	((sbi)->segs_per_sec * (sbi)->blocks_per_seg)
 #define GET_SEC_FROM_SEG(sbi, segno)				\
-	((segno) / (sbi)->segs_per_sec)
+	(((segno) == -1) ? -1: (segno) / (sbi)->segs_per_sec)
 #define GET_SEG_FROM_SEC(sbi, secno)				\
 	((secno) * (sbi)->segs_per_sec)
 #define GET_ZONE_FROM_SEC(sbi, secno)				\
-	((secno) / (sbi)->secs_per_zone)
+	(((secno) == -1) ? -1: (secno) / (sbi)->secs_per_zone)
 #define GET_ZONE_FROM_SEG(sbi, segno)				\
 	GET_ZONE_FROM_SEC(sbi, GET_SEC_FROM_SEG(sbi, segno))
 
-- 
2.30.1

[PATCH 4.19 36/52] f2fs: fix to set/clear I_LINKABLE under i_lock

[Greg Kroah-Hartman]

From: Chao Yu <yuchao0@huawei.com>

[ Upstream commit 46085f37fc9e12d5c3539fb768b5ad7951e72acf ]

fsstress + fault injection test case reports a warning message as
below:

WARNING: CPU: 13 PID: 6226 at fs/inode.c:361 inc_nlink+0x32/0x40
Call Trace:
 f2fs_init_inode_metadata+0x25c/0x4a0 [f2fs]
 f2fs_add_inline_entry+0x153/0x3b0 [f2fs]
 f2fs_add_dentry+0x75/0x80 [f2fs]
 f2fs_do_add_link+0x108/0x160 [f2fs]
 f2fs_rename2+0x6ab/0x14f0 [f2fs]
 vfs_rename+0x70c/0x940
 do_renameat2+0x4d8/0x4f0
 __x64_sys_renameat2+0x4b/0x60
 do_syscall_64+0x33/0x80
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Following race case can cause this:
Thread A				Kworker
- f2fs_rename
 - f2fs_create_whiteout
  - __f2fs_tmpfile
   - f2fs_i_links_write
    - f2fs_mark_inode_dirty_sync
     - mark_inode_dirty_sync
					- writeback_single_inode
					 - __writeback_single_inode
					  - spin_lock(&inode->i_lock)
   - inode->i_state |= I_LINKABLE
					  - inode->i_state &= ~dirty
					  - spin_unlock(&inode->i_lock)
 - f2fs_add_link
  - f2fs_do_add_link
   - f2fs_add_dentry
    - f2fs_add_inline_entry
     - f2fs_init_inode_metadata
      - f2fs_i_links_write
       - inc_nlink
        - WARN_ON(!(inode->i_state & I_LINKABLE))

Fix to add i_lock to avoid i_state update race condition.

Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/f2fs/namei.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/fs/f2fs/namei.c b/fs/f2fs/namei.c
index 8617e742d087..e20a0f9e6845 100644
--- a/fs/f2fs/namei.c
+++ b/fs/f2fs/namei.c
@@ -772,7 +772,11 @@ static int __f2fs_tmpfile(struct inode *dir, struct dentry *dentry,
 
 	if (whiteout) {
 		f2fs_i_links_write(inode, false);
+
+		spin_lock(&inode->i_lock);
 		inode->i_state |= I_LINKABLE;
+		spin_unlock(&inode->i_lock);
+
 		*whiteout = inode;
 	} else {
 		d_tmpfile(dentry, inode);
@@ -966,7 +970,11 @@ static int f2fs_rename(struct inode *old_dir, struct dentry *old_dentry,
 		err = f2fs_add_link(old_dentry, whiteout);
 		if (err)
 			goto put_out_dir;
+
+		spin_lock(&whiteout->i_lock);
 		whiteout->i_state &= ~I_LINKABLE;
+		spin_unlock(&whiteout->i_lock);
+
 		iput(whiteout);
 	}
 
-- 
2.30.1

[PATCH 4.19 37/52] btrfs: fix error handling in commit_fs_roots

[Greg Kroah-Hartman]

From: Josef Bacik <josef@toxicpanda.com>

[ Upstream commit 4f4317c13a40194940acf4a71670179c4faca2b5 ]

While doing error injection I would sometimes get a corrupt file system.
This is because I was injecting errors at btrfs_search_slot, but would
only do it one time per stack.  This uncovered a problem in
commit_fs_roots, where if we get an error we would just break.  However
we're in a nested loop, the first loop being a loop to find all the
dirty fs roots, and then subsequent root updates would succeed clearing
the error value.

This isn't likely to happen in real scenarios, however we could
potentially get a random ENOMEM once and then not again, and we'd end up
with a corrupted file system.  Fix this by moving the error checking
around a bit to the main loop, as this is the only place where something
will fail, and return the error as soon as it occurs.

With this patch my reproducer no longer corrupts the file system.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/btrfs/transaction.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/fs/btrfs/transaction.c b/fs/btrfs/transaction.c
index 8829d89eb4af..1b52c960682d 100644
--- a/fs/btrfs/transaction.c
+++ b/fs/btrfs/transaction.c
@@ -1249,7 +1249,6 @@ static noinline int commit_fs_roots(struct btrfs_trans_handle *trans)
 	struct btrfs_root *gang[8];
 	int i;
 	int ret;
-	int err = 0;
 
 	spin_lock(&fs_info->fs_roots_radix_lock);
 	while (1) {
@@ -1261,6 +1260,8 @@ static noinline int commit_fs_roots(struct btrfs_trans_handle *trans)
 			break;
 		for (i = 0; i < ret; i++) {
 			struct btrfs_root *root = gang[i];
+			int ret2;
+
 			radix_tree_tag_clear(&fs_info->fs_roots_radix,
 					(unsigned long)root->root_key.objectid,
 					BTRFS_ROOT_TRANS_TAG);
@@ -1282,17 +1283,17 @@ static noinline int commit_fs_roots(struct btrfs_trans_handle *trans)
 						    root->node);
 			}
 
-			err = btrfs_update_root(trans, fs_info->tree_root,
+			ret2 = btrfs_update_root(trans, fs_info->tree_root,
 						&root->root_key,
 						&root->root_item);
+			if (ret2)
+				return ret2;
 			spin_lock(&fs_info->fs_roots_radix_lock);
-			if (err)
-				break;
 			btrfs_qgroup_free_meta_all_pertrans(root);
 		}
 	}
 	spin_unlock(&fs_info->fs_roots_radix_lock);
-	return err;
+	return 0;
 }
 
 /*
-- 
2.30.1

[PATCH 4.19 38/52] parisc: Bump 64-bit IRQ stack size to 64 KB

[Greg Kroah-Hartman]

From: John David Anglin <dave.anglin@bell.net>

[ Upstream commit 31680c1d1595a59e17c14ec036b192a95f8e5f4a ]

Bump 64-bit IRQ stack size to 64 KB.

I had a kernel IRQ stack overflow on the mx3210 debian buildd machine.  This patch increases the
64-bit IRQ stack size to 64 KB.  The 64-bit stack size needs to be larger than the 32-bit stack
size since registers are twice as big.

Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/parisc/kernel/irq.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/parisc/kernel/irq.c b/arch/parisc/kernel/irq.c
index 0ca254085a66..c152c30c2d06 100644
--- a/arch/parisc/kernel/irq.c
+++ b/arch/parisc/kernel/irq.c
@@ -380,7 +380,11 @@ static inline int eirr_to_irq(unsigned long eirr)
 /*
  * IRQ STACK - used for irq handler
  */
+#ifdef CONFIG_64BIT
+#define IRQ_STACK_SIZE      (4096 << 4) /* 64k irq stack size */
+#else
 #define IRQ_STACK_SIZE      (4096 << 3) /* 32k irq stack size */
+#endif
 
 union irq_stack_union {
 	unsigned long stack[IRQ_STACK_SIZE/sizeof(unsigned long)];
-- 
2.30.1

[PATCH 4.19 39/52] ASoC: Intel: bytcr_rt5640: Add quirk for the Estar Beauty HD MID 7316R tablet

[Greg Kroah-Hartman]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit bdea43fc0436c9e98fdfe151c2ed8a3fc7277404 ]

The Estar Beauty HD MID 7316R tablet almost fully works with out default
settings. The only problem is that it has only 1 speaker so any sounds
only playing on the right channel get lost.

Add a quirk for this model using the default settings + MONO_SPEAKER.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210216213555.36555-2-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/intel/boards/bytcr_rt5640.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c
index ec630127ef2f..4dd1941d4147 100644
--- a/sound/soc/intel/boards/bytcr_rt5640.c
+++ b/sound/soc/intel/boards/bytcr_rt5640.c
@@ -510,6 +510,16 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = {
 					BYT_RT5640_MONO_SPEAKER |
 					BYT_RT5640_MCLK_EN),
 	},
+	{	/* Estar Beauty HD MID 7316R */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Estar"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "eSTAR BEAUTY HD Intel Quad core"),
+		},
+		.driver_data = (void *)(BYTCR_INPUT_DEFAULTS |
+					BYT_RT5640_MONO_SPEAKER |
+					BYT_RT5640_SSP0_AIF1 |
+					BYT_RT5640_MCLK_EN),
+	},
 	{
 		.matches = {
 			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
-- 
2.30.1

[PATCH 4.19 40/52] ASoC: Intel: bytcr_rt5640: Add quirk for the Voyo Winpad A15 tablet

[Greg Kroah-Hartman]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit e1317cc9ca4ac20262895fddb065ffda4fc29cfb ]

The Voyo Winpad A15 tablet uses a Bay Trail (non CR) SoC, so it is using
SSP2 (AIF1) and it mostly works with the defaults. But instead of using
DMIC1 it is using an analog mic on IN1, add a quirk for this.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210216213555.36555-3-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/intel/boards/bytcr_rt5640.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c
index 4dd1941d4147..910214ab140e 100644
--- a/sound/soc/intel/boards/bytcr_rt5640.c
+++ b/sound/soc/intel/boards/bytcr_rt5640.c
@@ -756,6 +756,20 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = {
 					BYT_RT5640_SSP0_AIF2 |
 					BYT_RT5640_MCLK_EN),
 	},
+	{	/* Voyo Winpad A15 */
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"),
+			DMI_MATCH(DMI_BOARD_NAME, "Aptio CRB"),
+			/* Above strings are too generic, also match on BIOS date */
+			DMI_MATCH(DMI_BIOS_DATE, "11/20/2014"),
+		},
+		.driver_data = (void *)(BYT_RT5640_IN1_MAP |
+					BYT_RT5640_JD_SRC_JD2_IN4N |
+					BYT_RT5640_OVCD_TH_2000UA |
+					BYT_RT5640_OVCD_SF_0P75 |
+					BYT_RT5640_DIFF_MIC |
+					BYT_RT5640_MCLK_EN),
+	},
 	{	/* Catch-all for generic Insyde tablets, must be last */
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Insyde"),
-- 
2.30.1

[PATCH 4.19 41/52] ASoC: Intel: bytcr_rt5640: Add quirk for the Acer One S1002 tablet

[Greg Kroah-Hartman]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit c58947af08aedbdee0fce5ea6e6bf3e488ae0e2c ]

The Acer One S1002 tablet is using an analog mic on IN1 and has
its jack-detect connected to JD2_IN4N, instead of using the default
IN3 for its internal mic and JD1_IN4P for jack-detect.

Note it is also using AIF2 instead of AIF1 which is somewhat unusual,
this is correctly advertised in the ACPI CHAN package, so the speakers
do work without the quirk.

Add a quirk for the mic and jack-detect settings.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210216213555.36555-5-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/intel/boards/bytcr_rt5640.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c
index 910214ab140e..8a943de1e5b5 100644
--- a/sound/soc/intel/boards/bytcr_rt5640.c
+++ b/sound/soc/intel/boards/bytcr_rt5640.c
@@ -409,6 +409,19 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = {
 					BYT_RT5640_SSP0_AIF1 |
 					BYT_RT5640_MCLK_EN),
 	},
+	{	/* Acer One 10 S1002 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "One S1002"),
+		},
+		.driver_data = (void *)(BYT_RT5640_IN1_MAP |
+					BYT_RT5640_JD_SRC_JD2_IN4N |
+					BYT_RT5640_OVCD_TH_2000UA |
+					BYT_RT5640_OVCD_SF_0P75 |
+					BYT_RT5640_DIFF_MIC |
+					BYT_RT5640_SSP0_AIF2 |
+					BYT_RT5640_MCLK_EN),
+	},
 	{
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
-- 
2.30.1

[PATCH 4.19 42/52] scsi: iscsi: Restrict sessions and handles to admin capabilities

[Greg Kroah-Hartman]

From: Lee Duncan <lduncan@suse.com>

commit 688e8128b7a92df982709a4137ea4588d16f24aa upstream.

Protect the iSCSI transport handle, available in sysfs, by requiring
CAP_SYS_ADMIN to read it. Also protect the netlink socket by restricting
reception of messages to ones sent with CAP_SYS_ADMIN. This disables
normal users from being able to end arbitrary iSCSI sessions.

Cc: stable@vger.kernel.org
Reported-by: Adam Nichols <adam@grimm-co.com>
Reviewed-by: Chris Leech <cleech@redhat.com>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/scsi/scsi_transport_iscsi.c |    6 ++++++
 1 file changed, 6 insertions(+)

--- a/drivers/scsi/scsi_transport_iscsi.c
+++ b/drivers/scsi/scsi_transport_iscsi.c
@@ -119,6 +119,9 @@ show_transport_handle(struct device *dev
 		      char *buf)
 {
 	struct iscsi_internal *priv = dev_to_iscsi_internal(dev);
+
+	if (!capable(CAP_SYS_ADMIN))
+		return -EACCES;
 	return sprintf(buf, "%llu\n", (unsigned long long)iscsi_handle(priv->iscsi_transport));
 }
 static DEVICE_ATTR(handle, S_IRUGO, show_transport_handle, NULL);
@@ -3504,6 +3507,9 @@ iscsi_if_recv_msg(struct sk_buff *skb, s
 	struct iscsi_cls_conn *conn;
 	struct iscsi_endpoint *ep = NULL;
 
+	if (!netlink_capable(skb, CAP_SYS_ADMIN))
+		return -EPERM;
+
 	if (nlh->nlmsg_type == ISCSI_UEVENT_PATH_UPDATE)
 		*group = ISCSI_NL_GRP_UIP;
 	else

[PATCH 4.19 43/52] sysfs: Add sysfs_emit and sysfs_emit_at to format sysfs output

[Greg Kroah-Hartman]

From: Joe Perches <joe@perches.com>

commit 2efc459d06f1630001e3984854848a5647086232 upstream.

Output defects can exist in sysfs content using sprintf and snprintf.

sprintf does not know the PAGE_SIZE maximum of the temporary buffer
used for outputting sysfs content and it's possible to overrun the
PAGE_SIZE buffer length.

Add a generic sysfs_emit function that knows that the size of the
temporary buffer and ensures that no overrun is done.

Add a generic sysfs_emit_at function that can be used in multiple
call situations that also ensures that no overrun is done.

Validate the output buffer argument to be page aligned.
Validate the offset len argument to be within the PAGE_SIZE buf.

Signed-off-by: Joe Perches <joe@perches.com>
Link: https://lore.kernel.org/r/884235202216d464d61ee975f7465332c86f76b2.1600285923.git.joe@perches.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 Documentation/filesystems/sysfs.txt |    8 +----
 fs/sysfs/file.c                     |   55 ++++++++++++++++++++++++++++++++++++
 include/linux/sysfs.h               |   16 ++++++++++
 3 files changed, 74 insertions(+), 5 deletions(-)

--- a/Documentation/filesystems/sysfs.txt
+++ b/Documentation/filesystems/sysfs.txt
@@ -211,12 +211,10 @@ Other notes:
   is 4096. 
 
 - show() methods should return the number of bytes printed into the
-  buffer. This is the return value of scnprintf().
+  buffer.
 
-- show() must not use snprintf() when formatting the value to be
-  returned to user space. If you can guarantee that an overflow
-  will never happen you can use sprintf() otherwise you must use
-  scnprintf().
+- show() should only use sysfs_emit() or sysfs_emit_at() when formatting
+  the value to be returned to user space.
 
 - store() should return the number of bytes used from the buffer. If the
   entire buffer has been used, just return the count argument.
--- a/fs/sysfs/file.c
+++ b/fs/sysfs/file.c
@@ -15,6 +15,7 @@
 #include <linux/list.h>
 #include <linux/mutex.h>
 #include <linux/seq_file.h>
+#include <linux/mm.h>
 
 #include "sysfs.h"
 #include "../kernfs/kernfs-internal.h"
@@ -556,3 +557,57 @@ void sysfs_remove_bin_file(struct kobjec
 	kernfs_remove_by_name(kobj->sd, attr->attr.name);
 }
 EXPORT_SYMBOL_GPL(sysfs_remove_bin_file);
+
+/**
+ *	sysfs_emit - scnprintf equivalent, aware of PAGE_SIZE buffer.
+ *	@buf:	start of PAGE_SIZE buffer.
+ *	@fmt:	format
+ *	@...:	optional arguments to @format
+ *
+ *
+ * Returns number of characters written to @buf.
+ */
+int sysfs_emit(char *buf, const char *fmt, ...)
+{
+	va_list args;
+	int len;
+
+	if (WARN(!buf || offset_in_page(buf),
+		 "invalid sysfs_emit: buf:%p\n", buf))
+		return 0;
+
+	va_start(args, fmt);
+	len = vscnprintf(buf, PAGE_SIZE, fmt, args);
+	va_end(args);
+
+	return len;
+}
+EXPORT_SYMBOL_GPL(sysfs_emit);
+
+/**
+ *	sysfs_emit_at - scnprintf equivalent, aware of PAGE_SIZE buffer.
+ *	@buf:	start of PAGE_SIZE buffer.
+ *	@at:	offset in @buf to start write in bytes
+ *		@at must be >= 0 && < PAGE_SIZE
+ *	@fmt:	format
+ *	@...:	optional arguments to @fmt
+ *
+ *
+ * Returns number of characters written starting at &@buf[@at].
+ */
+int sysfs_emit_at(char *buf, int at, const char *fmt, ...)
+{
+	va_list args;
+	int len;
+
+	if (WARN(!buf || offset_in_page(buf) || at < 0 || at >= PAGE_SIZE,
+		 "invalid sysfs_emit_at: buf:%p at:%d\n", buf, at))
+		return 0;
+
+	va_start(args, fmt);
+	len = vscnprintf(buf + at, PAGE_SIZE - at, fmt, args);
+	va_end(args);
+
+	return len;
+}
+EXPORT_SYMBOL_GPL(sysfs_emit_at);
--- a/include/linux/sysfs.h
+++ b/include/linux/sysfs.h
@@ -299,6 +299,11 @@ static inline void sysfs_enable_ns(struc
 	return kernfs_enable_ns(kn);
 }
 
+__printf(2, 3)
+int sysfs_emit(char *buf, const char *fmt, ...);
+__printf(3, 4)
+int sysfs_emit_at(char *buf, int at, const char *fmt, ...);
+
 #else /* CONFIG_SYSFS */
 
 static inline int sysfs_create_dir_ns(struct kobject *kobj, const void *ns)
@@ -505,6 +510,17 @@ static inline void sysfs_enable_ns(struc
 {
 }
 
+__printf(2, 3)
+static inline int sysfs_emit(char *buf, const char *fmt, ...)
+{
+	return 0;
+}
+
+__printf(3, 4)
+static inline int sysfs_emit_at(char *buf, int at, const char *fmt, ...)
+{
+	return 0;
+}
 #endif /* CONFIG_SYSFS */
 
 static inline int __must_check sysfs_create_file(struct kobject *kobj,

[PATCH 4.19 44/52] scsi: iscsi: Ensure sysfs attributes are limited to PAGE_SIZE

[Greg Kroah-Hartman]

From: Chris Leech <cleech@redhat.com>

commit ec98ea7070e94cc25a422ec97d1421e28d97b7ee upstream.

As the iSCSI parameters are exported back through sysfs, it should be
enforcing that they never are more than PAGE_SIZE (which should be more
than enough) before accepting updates through netlink.

Change all iSCSI sysfs attributes to use sysfs_emit().

Cc: stable@vger.kernel.org
Reported-by: Adam Nichols <adam@grimm-co.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/scsi/libiscsi.c             |  148 ++++++++++++++++++------------------
 drivers/scsi/scsi_transport_iscsi.c |   23 +++--
 2 files changed, 89 insertions(+), 82 deletions(-)

--- a/drivers/scsi/libiscsi.c
+++ b/drivers/scsi/libiscsi.c
@@ -3368,125 +3368,125 @@ int iscsi_session_get_param(struct iscsi
 
 	switch(param) {
 	case ISCSI_PARAM_FAST_ABORT:
-		len = sprintf(buf, "%d\n", session->fast_abort);
+		len = sysfs_emit(buf, "%d\n", session->fast_abort);
 		break;
 	case ISCSI_PARAM_ABORT_TMO:
-		len = sprintf(buf, "%d\n", session->abort_timeout);
+		len = sysfs_emit(buf, "%d\n", session->abort_timeout);
 		break;
 	case ISCSI_PARAM_LU_RESET_TMO:
-		len = sprintf(buf, "%d\n", session->lu_reset_timeout);
+		len = sysfs_emit(buf, "%d\n", session->lu_reset_timeout);
 		break;
 	case ISCSI_PARAM_TGT_RESET_TMO:
-		len = sprintf(buf, "%d\n", session->tgt_reset_timeout);
+		len = sysfs_emit(buf, "%d\n", session->tgt_reset_timeout);
 		break;
 	case ISCSI_PARAM_INITIAL_R2T_EN:
-		len = sprintf(buf, "%d\n", session->initial_r2t_en);
+		len = sysfs_emit(buf, "%d\n", session->initial_r2t_en);
 		break;
 	case ISCSI_PARAM_MAX_R2T:
-		len = sprintf(buf, "%hu\n", session->max_r2t);
+		len = sysfs_emit(buf, "%hu\n", session->max_r2t);
 		break;
 	case ISCSI_PARAM_IMM_DATA_EN:
-		len = sprintf(buf, "%d\n", session->imm_data_en);
+		len = sysfs_emit(buf, "%d\n", session->imm_data_en);
 		break;
 	case ISCSI_PARAM_FIRST_BURST:
-		len = sprintf(buf, "%u\n", session->first_burst);
+		len = sysfs_emit(buf, "%u\n", session->first_burst);
 		break;
 	case ISCSI_PARAM_MAX_BURST:
-		len = sprintf(buf, "%u\n", session->max_burst);
+		len = sysfs_emit(buf, "%u\n", session->max_burst);
 		break;
 	case ISCSI_PARAM_PDU_INORDER_EN:
-		len = sprintf(buf, "%d\n", session->pdu_inorder_en);
+		len = sysfs_emit(buf, "%d\n", session->pdu_inorder_en);
 		break;
 	case ISCSI_PARAM_DATASEQ_INORDER_EN:
-		len = sprintf(buf, "%d\n", session->dataseq_inorder_en);
+		len = sysfs_emit(buf, "%d\n", session->dataseq_inorder_en);
 		break;
 	case ISCSI_PARAM_DEF_TASKMGMT_TMO:
-		len = sprintf(buf, "%d\n", session->def_taskmgmt_tmo);
+		len = sysfs_emit(buf, "%d\n", session->def_taskmgmt_tmo);
 		break;
 	case ISCSI_PARAM_ERL:
-		len = sprintf(buf, "%d\n", session->erl);
+		len = sysfs_emit(buf, "%d\n", session->erl);
 		break;
 	case ISCSI_PARAM_TARGET_NAME:
-		len = sprintf(buf, "%s\n", session->targetname);
+		len = sysfs_emit(buf, "%s\n", session->targetname);
 		break;
 	case ISCSI_PARAM_TARGET_ALIAS:
-		len = sprintf(buf, "%s\n", session->targetalias);
+		len = sysfs_emit(buf, "%s\n", session->targetalias);
 		break;
 	case ISCSI_PARAM_TPGT:
-		len = sprintf(buf, "%d\n", session->tpgt);
+		len = sysfs_emit(buf, "%d\n", session->tpgt);
 		break;
 	case ISCSI_PARAM_USERNAME:
-		len = sprintf(buf, "%s\n", session->username);
+		len = sysfs_emit(buf, "%s\n", session->username);
 		break;
 	case ISCSI_PARAM_USERNAME_IN:
-		len = sprintf(buf, "%s\n", session->username_in);
+		len = sysfs_emit(buf, "%s\n", session->username_in);
 		break;
 	case ISCSI_PARAM_PASSWORD:
-		len = sprintf(buf, "%s\n", session->password);
+		len = sysfs_emit(buf, "%s\n", session->password);
 		break;
 	case ISCSI_PARAM_PASSWORD_IN:
-		len = sprintf(buf, "%s\n", session->password_in);
+		len = sysfs_emit(buf, "%s\n", session->password_in);
 		break;
 	case ISCSI_PARAM_IFACE_NAME:
-		len = sprintf(buf, "%s\n", session->ifacename);
+		len = sysfs_emit(buf, "%s\n", session->ifacename);
 		break;
 	case ISCSI_PARAM_INITIATOR_NAME:
-		len = sprintf(buf, "%s\n", session->initiatorname);
+		len = sysfs_emit(buf, "%s\n", session->initiatorname);
 		break;
 	case ISCSI_PARAM_BOOT_ROOT:
-		len = sprintf(buf, "%s\n", session->boot_root);
+		len = sysfs_emit(buf, "%s\n", session->boot_root);
 		break;
 	case ISCSI_PARAM_BOOT_NIC:
-		len = sprintf(buf, "%s\n", session->boot_nic);
+		len = sysfs_emit(buf, "%s\n", session->boot_nic);
 		break;
 	case ISCSI_PARAM_BOOT_TARGET:
-		len = sprintf(buf, "%s\n", session->boot_target);
+		len = sysfs_emit(buf, "%s\n", session->boot_target);
 		break;
 	case ISCSI_PARAM_AUTO_SND_TGT_DISABLE:
-		len = sprintf(buf, "%u\n", session->auto_snd_tgt_disable);
+		len = sysfs_emit(buf, "%u\n", session->auto_snd_tgt_disable);
 		break;
 	case ISCSI_PARAM_DISCOVERY_SESS:
-		len = sprintf(buf, "%u\n", session->discovery_sess);
+		len = sysfs_emit(buf, "%u\n", session->discovery_sess);
 		break;
 	case ISCSI_PARAM_PORTAL_TYPE:
-		len = sprintf(buf, "%s\n", session->portal_type);
+		len = sysfs_emit(buf, "%s\n", session->portal_type);
 		break;
 	case ISCSI_PARAM_CHAP_AUTH_EN:
-		len = sprintf(buf, "%u\n", session->chap_auth_en);
+		len = sysfs_emit(buf, "%u\n", session->chap_auth_en);
 		break;
 	case ISCSI_PARAM_DISCOVERY_LOGOUT_EN:
-		len = sprintf(buf, "%u\n", session->discovery_logout_en);
+		len = sysfs_emit(buf, "%u\n", session->discovery_logout_en);
 		break;
 	case ISCSI_PARAM_BIDI_CHAP_EN:
-		len = sprintf(buf, "%u\n", session->bidi_chap_en);
+		len = sysfs_emit(buf, "%u\n", session->bidi_chap_en);
 		break;
 	case ISCSI_PARAM_DISCOVERY_AUTH_OPTIONAL:
-		len = sprintf(buf, "%u\n", session->discovery_auth_optional);
+		len = sysfs_emit(buf, "%u\n", session->discovery_auth_optional);
 		break;
 	case ISCSI_PARAM_DEF_TIME2WAIT:
-		len = sprintf(buf, "%d\n", session->time2wait);
+		len = sysfs_emit(buf, "%d\n", session->time2wait);
 		break;
 	case ISCSI_PARAM_DEF_TIME2RETAIN:
-		len = sprintf(buf, "%d\n", session->time2retain);
+		len = sysfs_emit(buf, "%d\n", session->time2retain);
 		break;
 	case ISCSI_PARAM_TSID:
-		len = sprintf(buf, "%u\n", session->tsid);
+		len = sysfs_emit(buf, "%u\n", session->tsid);
 		break;
 	case ISCSI_PARAM_ISID:
-		len = sprintf(buf, "%02x%02x%02x%02x%02x%02x\n",
+		len = sysfs_emit(buf, "%02x%02x%02x%02x%02x%02x\n",
 			      session->isid[0], session->isid[1],
 			      session->isid[2], session->isid[3],
 			      session->isid[4], session->isid[5]);
 		break;
 	case ISCSI_PARAM_DISCOVERY_PARENT_IDX:
-		len = sprintf(buf, "%u\n", session->discovery_parent_idx);
+		len = sysfs_emit(buf, "%u\n", session->discovery_parent_idx);
 		break;
 	case ISCSI_PARAM_DISCOVERY_PARENT_TYPE:
 		if (session->discovery_parent_type)
-			len = sprintf(buf, "%s\n",
+			len = sysfs_emit(buf, "%s\n",
 				      session->discovery_parent_type);
 		else
-			len = sprintf(buf, "\n");
+			len = sysfs_emit(buf, "\n");
 		break;
 	default:
 		return -ENOSYS;
@@ -3518,16 +3518,16 @@ int iscsi_conn_get_addr_param(struct soc
 	case ISCSI_PARAM_CONN_ADDRESS:
 	case ISCSI_HOST_PARAM_IPADDRESS:
 		if (sin)
-			len = sprintf(buf, "%pI4\n", &sin->sin_addr.s_addr);
+			len = sysfs_emit(buf, "%pI4\n", &sin->sin_addr.s_addr);
 		else
-			len = sprintf(buf, "%pI6\n", &sin6->sin6_addr);
+			len = sysfs_emit(buf, "%pI6\n", &sin6->sin6_addr);
 		break;
 	case ISCSI_PARAM_CONN_PORT:
 	case ISCSI_PARAM_LOCAL_PORT:
 		if (sin)
-			len = sprintf(buf, "%hu\n", be16_to_cpu(sin->sin_port));
+			len = sysfs_emit(buf, "%hu\n", be16_to_cpu(sin->sin_port));
 		else
-			len = sprintf(buf, "%hu\n",
+			len = sysfs_emit(buf, "%hu\n",
 				      be16_to_cpu(sin6->sin6_port));
 		break;
 	default:
@@ -3546,88 +3546,88 @@ int iscsi_conn_get_param(struct iscsi_cl
 
 	switch(param) {
 	case ISCSI_PARAM_PING_TMO:
-		len = sprintf(buf, "%u\n", conn->ping_timeout);
+		len = sysfs_emit(buf, "%u\n", conn->ping_timeout);
 		break;
 	case ISCSI_PARAM_RECV_TMO:
-		len = sprintf(buf, "%u\n", conn->recv_timeout);
+		len = sysfs_emit(buf, "%u\n", conn->recv_timeout);
 		break;
 	case ISCSI_PARAM_MAX_RECV_DLENGTH:
-		len = sprintf(buf, "%u\n", conn->max_recv_dlength);
+		len = sysfs_emit(buf, "%u\n", conn->max_recv_dlength);
 		break;
 	case ISCSI_PARAM_MAX_XMIT_DLENGTH:
-		len = sprintf(buf, "%u\n", conn->max_xmit_dlength);
+		len = sysfs_emit(buf, "%u\n", conn->max_xmit_dlength);
 		break;
 	case ISCSI_PARAM_HDRDGST_EN:
-		len = sprintf(buf, "%d\n", conn->hdrdgst_en);
+		len = sysfs_emit(buf, "%d\n", conn->hdrdgst_en);
 		break;
 	case ISCSI_PARAM_DATADGST_EN:
-		len = sprintf(buf, "%d\n", conn->datadgst_en);
+		len = sysfs_emit(buf, "%d\n", conn->datadgst_en);
 		break;
 	case ISCSI_PARAM_IFMARKER_EN:
-		len = sprintf(buf, "%d\n", conn->ifmarker_en);
+		len = sysfs_emit(buf, "%d\n", conn->ifmarker_en);
 		break;
 	case ISCSI_PARAM_OFMARKER_EN:
-		len = sprintf(buf, "%d\n", conn->ofmarker_en);
+		len = sysfs_emit(buf, "%d\n", conn->ofmarker_en);
 		break;
 	case ISCSI_PARAM_EXP_STATSN:
-		len = sprintf(buf, "%u\n", conn->exp_statsn);
+		len = sysfs_emit(buf, "%u\n", conn->exp_statsn);
 		break;
 	case ISCSI_PARAM_PERSISTENT_PORT:
-		len = sprintf(buf, "%d\n", conn->persistent_port);
+		len = sysfs_emit(buf, "%d\n", conn->persistent_port);
 		break;
 	case ISCSI_PARAM_PERSISTENT_ADDRESS:
-		len = sprintf(buf, "%s\n", conn->persistent_address);
+		len = sysfs_emit(buf, "%s\n", conn->persistent_address);
 		break;
 	case ISCSI_PARAM_STATSN:
-		len = sprintf(buf, "%u\n", conn->statsn);
+		len = sysfs_emit(buf, "%u\n", conn->statsn);
 		break;
 	case ISCSI_PARAM_MAX_SEGMENT_SIZE:
-		len = sprintf(buf, "%u\n", conn->max_segment_size);
+		len = sysfs_emit(buf, "%u\n", conn->max_segment_size);
 		break;
 	case ISCSI_PARAM_KEEPALIVE_TMO:
-		len = sprintf(buf, "%u\n", conn->keepalive_tmo);
+		len = sysfs_emit(buf, "%u\n", conn->keepalive_tmo);
 		break;
 	case ISCSI_PARAM_LOCAL_PORT:
-		len = sprintf(buf, "%u\n", conn->local_port);
+		len = sysfs_emit(buf, "%u\n", conn->local_port);
 		break;
 	case ISCSI_PARAM_TCP_TIMESTAMP_STAT:
-		len = sprintf(buf, "%u\n", conn->tcp_timestamp_stat);
+		len = sysfs_emit(buf, "%u\n", conn->tcp_timestamp_stat);
 		break;
 	case ISCSI_PARAM_TCP_NAGLE_DISABLE:
-		len = sprintf(buf, "%u\n", conn->tcp_nagle_disable);
+		len = sysfs_emit(buf, "%u\n", conn->tcp_nagle_disable);
 		break;
 	case ISCSI_PARAM_TCP_WSF_DISABLE:
-		len = sprintf(buf, "%u\n", conn->tcp_wsf_disable);
+		len = sysfs_emit(buf, "%u\n", conn->tcp_wsf_disable);
 		break;
 	case ISCSI_PARAM_TCP_TIMER_SCALE:
-		len = sprintf(buf, "%u\n", conn->tcp_timer_scale);
+		len = sysfs_emit(buf, "%u\n", conn->tcp_timer_scale);
 		break;
 	case ISCSI_PARAM_TCP_TIMESTAMP_EN:
-		len = sprintf(buf, "%u\n", conn->tcp_timestamp_en);
+		len = sysfs_emit(buf, "%u\n", conn->tcp_timestamp_en);
 		break;
 	case ISCSI_PARAM_IP_FRAGMENT_DISABLE:
-		len = sprintf(buf, "%u\n", conn->fragment_disable);
+		len = sysfs_emit(buf, "%u\n", conn->fragment_disable);
 		break;
 	case ISCSI_PARAM_IPV4_TOS:
-		len = sprintf(buf, "%u\n", conn->ipv4_tos);
+		len = sysfs_emit(buf, "%u\n", conn->ipv4_tos);
 		break;
 	case ISCSI_PARAM_IPV6_TC:
-		len = sprintf(buf, "%u\n", conn->ipv6_traffic_class);
+		len = sysfs_emit(buf, "%u\n", conn->ipv6_traffic_class);
 		break;
 	case ISCSI_PARAM_IPV6_FLOW_LABEL:
-		len = sprintf(buf, "%u\n", conn->ipv6_flow_label);
+		len = sysfs_emit(buf, "%u\n", conn->ipv6_flow_label);
 		break;
 	case ISCSI_PARAM_IS_FW_ASSIGNED_IPV6:
-		len = sprintf(buf, "%u\n", conn->is_fw_assigned_ipv6);
+		len = sysfs_emit(buf, "%u\n", conn->is_fw_assigned_ipv6);
 		break;
 	case ISCSI_PARAM_TCP_XMIT_WSF:
-		len = sprintf(buf, "%u\n", conn->tcp_xmit_wsf);
+		len = sysfs_emit(buf, "%u\n", conn->tcp_xmit_wsf);
 		break;
 	case ISCSI_PARAM_TCP_RECV_WSF:
-		len = sprintf(buf, "%u\n", conn->tcp_recv_wsf);
+		len = sysfs_emit(buf, "%u\n", conn->tcp_recv_wsf);
 		break;
 	case ISCSI_PARAM_LOCAL_IPADDR:
-		len = sprintf(buf, "%s\n", conn->local_ipaddr);
+		len = sysfs_emit(buf, "%s\n", conn->local_ipaddr);
 		break;
 	default:
 		return -ENOSYS;
@@ -3645,13 +3645,13 @@ int iscsi_host_get_param(struct Scsi_Hos
 
 	switch (param) {
 	case ISCSI_HOST_PARAM_NETDEV_NAME:
-		len = sprintf(buf, "%s\n", ihost->netdev);
+		len = sysfs_emit(buf, "%s\n", ihost->netdev);
 		break;
 	case ISCSI_HOST_PARAM_HWADDRESS:
-		len = sprintf(buf, "%s\n", ihost->hwaddress);
+		len = sysfs_emit(buf, "%s\n", ihost->hwaddress);
 		break;
 	case ISCSI_HOST_PARAM_INITIATOR_NAME:
-		len = sprintf(buf, "%s\n", ihost->initiatorname);
+		len = sysfs_emit(buf, "%s\n", ihost->initiatorname);
 		break;
 	default:
 		return -ENOSYS;
--- a/drivers/scsi/scsi_transport_iscsi.c
+++ b/drivers/scsi/scsi_transport_iscsi.c
@@ -122,7 +122,8 @@ show_transport_handle(struct device *dev
 
 	if (!capable(CAP_SYS_ADMIN))
 		return -EACCES;
-	return sprintf(buf, "%llu\n", (unsigned long long)iscsi_handle(priv->iscsi_transport));
+	return sysfs_emit(buf, "%llu\n",
+		  (unsigned long long)iscsi_handle(priv->iscsi_transport));
 }
 static DEVICE_ATTR(handle, S_IRUGO, show_transport_handle, NULL);
 
@@ -132,7 +133,7 @@ show_transport_##name(struct device *dev
 		      struct device_attribute *attr,char *buf)		\
 {									\
 	struct iscsi_internal *priv = dev_to_iscsi_internal(dev);	\
-	return sprintf(buf, format"\n", priv->iscsi_transport->name);	\
+	return sysfs_emit(buf, format"\n", priv->iscsi_transport->name);\
 }									\
 static DEVICE_ATTR(name, S_IRUGO, show_transport_##name, NULL);
 
@@ -173,7 +174,7 @@ static ssize_t
 show_ep_handle(struct device *dev, struct device_attribute *attr, char *buf)
 {
 	struct iscsi_endpoint *ep = iscsi_dev_to_endpoint(dev);
-	return sprintf(buf, "%llu\n", (unsigned long long) ep->id);
+	return sysfs_emit(buf, "%llu\n", (unsigned long long) ep->id);
 }
 static ISCSI_ATTR(ep, handle, S_IRUGO, show_ep_handle, NULL);
 
@@ -2766,6 +2767,9 @@ iscsi_set_param(struct iscsi_transport *
 	struct iscsi_cls_session *session;
 	int err = 0, value = 0;
 
+	if (ev->u.set_param.len > PAGE_SIZE)
+		return -EINVAL;
+
 	session = iscsi_session_lookup(ev->u.set_param.sid);
 	conn = iscsi_conn_lookup(ev->u.set_param.sid, ev->u.set_param.cid);
 	if (!conn || !session)
@@ -2913,6 +2917,9 @@ iscsi_set_host_param(struct iscsi_transp
 	if (!transport->set_host_param)
 		return -ENOSYS;
 
+	if (ev->u.set_host_param.len > PAGE_SIZE)
+		return -EINVAL;
+
 	shost = scsi_host_lookup(ev->u.set_host_param.host_no);
 	if (!shost) {
 		printk(KERN_ERR "set_host_param could not find host no %u\n",
@@ -4023,7 +4030,7 @@ show_priv_session_state(struct device *d
 			char *buf)
 {
 	struct iscsi_cls_session *session = iscsi_dev_to_session(dev->parent);
-	return sprintf(buf, "%s\n", iscsi_session_state_name(session->state));
+	return sysfs_emit(buf, "%s\n", iscsi_session_state_name(session->state));
 }
 static ISCSI_CLASS_ATTR(priv_sess, state, S_IRUGO, show_priv_session_state,
 			NULL);
@@ -4032,7 +4039,7 @@ show_priv_session_creator(struct device
 			char *buf)
 {
 	struct iscsi_cls_session *session = iscsi_dev_to_session(dev->parent);
-	return sprintf(buf, "%d\n", session->creator);
+	return sysfs_emit(buf, "%d\n", session->creator);
 }
 static ISCSI_CLASS_ATTR(priv_sess, creator, S_IRUGO, show_priv_session_creator,
 			NULL);
@@ -4041,7 +4048,7 @@ show_priv_session_target_id(struct devic
 			    char *buf)
 {
 	struct iscsi_cls_session *session = iscsi_dev_to_session(dev->parent);
-	return sprintf(buf, "%d\n", session->target_id);
+	return sysfs_emit(buf, "%d\n", session->target_id);
 }
 static ISCSI_CLASS_ATTR(priv_sess, target_id, S_IRUGO,
 			show_priv_session_target_id, NULL);
@@ -4054,8 +4061,8 @@ show_priv_session_##field(struct device
 	struct iscsi_cls_session *session = 				\
 			iscsi_dev_to_session(dev->parent);		\
 	if (session->field == -1)					\
-		return sprintf(buf, "off\n");				\
-	return sprintf(buf, format"\n", session->field);		\
+		return sysfs_emit(buf, "off\n");			\
+	return sysfs_emit(buf, format"\n", session->field);		\
 }
 
 #define iscsi_priv_session_attr_store(field)				\

[PATCH 4.19 45/52] scsi: iscsi: Verify lengths on passthrough PDUs

[Greg Kroah-Hartman]

From: Chris Leech <cleech@redhat.com>

commit f9dbdf97a5bd92b1a49cee3d591b55b11fd7a6d5 upstream.

Open-iSCSI sends passthrough PDUs over netlink, but the kernel should be
verifying that the provided PDU header and data lengths fall within the
netlink message to prevent accessing beyond that in memory.

Cc: stable@vger.kernel.org
Reported-by: Adam Nichols <adam@grimm-co.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/scsi/scsi_transport_iscsi.c |    9 +++++++++
 1 file changed, 9 insertions(+)

--- a/drivers/scsi/scsi_transport_iscsi.c
+++ b/drivers/scsi/scsi_transport_iscsi.c
@@ -3507,6 +3507,7 @@ iscsi_if_recv_msg(struct sk_buff *skb, s
 {
 	int err = 0;
 	u32 portid;
+	u32 pdu_len;
 	struct iscsi_uevent *ev = nlmsg_data(nlh);
 	struct iscsi_transport *transport = NULL;
 	struct iscsi_internal *priv;
@@ -3624,6 +3625,14 @@ iscsi_if_recv_msg(struct sk_buff *skb, s
 			err = -EINVAL;
 		break;
 	case ISCSI_UEVENT_SEND_PDU:
+		pdu_len = nlh->nlmsg_len - sizeof(*nlh) - sizeof(*ev);
+
+		if ((ev->u.send_pdu.hdr_size > pdu_len) ||
+		    (ev->u.send_pdu.data_size > (pdu_len - ev->u.send_pdu.hdr_size))) {
+			err = -EINVAL;
+			break;
+		}
+
 		conn = iscsi_conn_lookup(ev->u.send_pdu.sid, ev->u.send_pdu.cid);
 		if (conn)
 			ev->r.retcode =	transport->send_pdu(conn,

[PATCH 4.19 46/52] Xen/gnttab: handle p2m update errors on a per-slot basis

[Greg Kroah-Hartman]

From: Jan Beulich <jbeulich@suse.com>

commit 8310b77b48c5558c140e7a57a702e7819e62f04e upstream.

Bailing immediately from set_foreign_p2m_mapping() upon a p2m updating
error leaves the full batch in an ambiguous state as far as the caller
is concerned. Instead flags respective slots as bad, unmapping what
was mapped there right away.

HYPERVISOR_grant_table_op()'s return value and the individual unmap
slots' status fields get used only for a one-time - there's not much we
can do in case of a failure.

Note that there's no GNTST_enomem or alike, so GNTST_general_error gets
used.

The map ops' handle fields get overwritten just to be on the safe side.

This is part of XSA-367.

Cc: <stable@vger.kernel.org>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/96cccf5d-e756-5f53-b91a-ea269bfb9be0@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm/xen/p2m.c |   35 +++++++++++++++++++++++++++++++----
 arch/x86/xen/p2m.c |   44 +++++++++++++++++++++++++++++++++++++++++---
 2 files changed, 72 insertions(+), 7 deletions(-)

--- a/arch/arm/xen/p2m.c
+++ b/arch/arm/xen/p2m.c
@@ -91,12 +91,39 @@ int set_foreign_p2m_mapping(struct gntta
 	int i;
 
 	for (i = 0; i < count; i++) {
+		struct gnttab_unmap_grant_ref unmap;
+		int rc;
+
 		if (map_ops[i].status)
 			continue;
-		if (unlikely(!set_phys_to_machine(map_ops[i].host_addr >> XEN_PAGE_SHIFT,
-				    map_ops[i].dev_bus_addr >> XEN_PAGE_SHIFT))) {
-			return -ENOMEM;
-		}
+		if (likely(set_phys_to_machine(map_ops[i].host_addr >> XEN_PAGE_SHIFT,
+				    map_ops[i].dev_bus_addr >> XEN_PAGE_SHIFT)))
+			continue;
+
+		/*
+		 * Signal an error for this slot. This in turn requires
+		 * immediate unmapping.
+		 */
+		map_ops[i].status = GNTST_general_error;
+		unmap.host_addr = map_ops[i].host_addr,
+		unmap.handle = map_ops[i].handle;
+		map_ops[i].handle = ~0;
+		if (map_ops[i].flags & GNTMAP_device_map)
+			unmap.dev_bus_addr = map_ops[i].dev_bus_addr;
+		else
+			unmap.dev_bus_addr = 0;
+
+		/*
+		 * Pre-populate the status field, to be recognizable in
+		 * the log message below.
+		 */
+		unmap.status = 1;
+
+		rc = HYPERVISOR_grant_table_op(GNTTABOP_unmap_grant_ref,
+					       &unmap, 1);
+		if (rc || unmap.status != GNTST_okay)
+			pr_err_once("gnttab unmap failed: rc=%d st=%d\n",
+				    rc, unmap.status);
 	}
 
 	return 0;
--- a/arch/x86/xen/p2m.c
+++ b/arch/x86/xen/p2m.c
@@ -706,6 +706,8 @@ int set_foreign_p2m_mapping(struct gntta
 
 	for (i = 0; i < count; i++) {
 		unsigned long mfn, pfn;
+		struct gnttab_unmap_grant_ref unmap[2];
+		int rc;
 
 		/* Do not add to override if the map failed. */
 		if (map_ops[i].status != GNTST_okay ||
@@ -723,10 +725,46 @@ int set_foreign_p2m_mapping(struct gntta
 
 		WARN(pfn_to_mfn(pfn) != INVALID_P2M_ENTRY, "page must be ballooned");
 
-		if (unlikely(!set_phys_to_machine(pfn, FOREIGN_FRAME(mfn)))) {
-			ret = -ENOMEM;
-			goto out;
+		if (likely(set_phys_to_machine(pfn, FOREIGN_FRAME(mfn))))
+			continue;
+
+		/*
+		 * Signal an error for this slot. This in turn requires
+		 * immediate unmapping.
+		 */
+		map_ops[i].status = GNTST_general_error;
+		unmap[0].host_addr = map_ops[i].host_addr,
+		unmap[0].handle = map_ops[i].handle;
+		map_ops[i].handle = ~0;
+		if (map_ops[i].flags & GNTMAP_device_map)
+			unmap[0].dev_bus_addr = map_ops[i].dev_bus_addr;
+		else
+			unmap[0].dev_bus_addr = 0;
+
+		if (kmap_ops) {
+			kmap_ops[i].status = GNTST_general_error;
+			unmap[1].host_addr = kmap_ops[i].host_addr,
+			unmap[1].handle = kmap_ops[i].handle;
+			kmap_ops[i].handle = ~0;
+			if (kmap_ops[i].flags & GNTMAP_device_map)
+				unmap[1].dev_bus_addr = kmap_ops[i].dev_bus_addr;
+			else
+				unmap[1].dev_bus_addr = 0;
 		}
+
+		/*
+		 * Pre-populate both status fields, to be recognizable in
+		 * the log message below.
+		 */
+		unmap[0].status = 1;
+		unmap[1].status = 1;
+
+		rc = HYPERVISOR_grant_table_op(GNTTABOP_unmap_grant_ref,
+					       unmap, 1 + !!kmap_ops);
+		if (rc || unmap[0].status != GNTST_okay ||
+		    unmap[1].status != GNTST_okay)
+			pr_err_once("gnttab unmap failed: rc=%d st0=%d st1=%d\n",
+				    rc, unmap[0].status, unmap[1].status);
 	}
 
 out:

[PATCH 4.19 47/52] xen-netback: respect gnttab_map_refs()s return value

[Greg Kroah-Hartman]

From: Jan Beulich <jbeulich@suse.com>

commit 2991397d23ec597405b116d96de3813420bdcbc3 upstream.

Commit 3194a1746e8a ("xen-netback: don't "handle" error by BUG()")
dropped respective a BUG_ON() without noticing that with this the
variable's value wouldn't be consumed anymore. With gnttab_set_map_op()
setting all status fields to a non-zero value, in case of an error no
slot should have a status of GNTST_okay (zero).

This is part of XSA-367.

Cc: <stable@vger.kernel.org>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/d933f495-619a-0086-5fb4-1ec3cf81a8fc@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/xen-netback/netback.c |   12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

--- a/drivers/net/xen-netback/netback.c
+++ b/drivers/net/xen-netback/netback.c
@@ -1326,11 +1326,21 @@ int xenvif_tx_action(struct xenvif_queue
 		return 0;
 
 	gnttab_batch_copy(queue->tx_copy_ops, nr_cops);
-	if (nr_mops != 0)
+	if (nr_mops != 0) {
 		ret = gnttab_map_refs(queue->tx_map_ops,
 				      NULL,
 				      queue->pages_to_map,
 				      nr_mops);
+		if (ret) {
+			unsigned int i;
+
+			netdev_err(queue->vif->dev, "Map fail: nr %u ret %d\n",
+				   nr_mops, ret);
+			for (i = 0; i < nr_mops; ++i)
+				WARN_ON_ONCE(queue->tx_map_ops[i].status ==
+				             GNTST_okay);
+		}
+	}
 
 	work_done = xenvif_tx_submit(queue);
 

[PATCH 4.19 48/52] zsmalloc: account the number of compacted pages correctly

[Greg Kroah-Hartman]

From: Rokudo Yan <wu-yan@tcl.com>

commit 2395928158059b8f9858365fce7713ce7fef62e4 upstream.

There exists multiple path may do zram compaction concurrently.
1. auto-compaction triggered during memory reclaim
2. userspace utils write zram<id>/compaction node

So, multiple threads may call zs_shrinker_scan/zs_compact concurrently.
But pages_compacted is a per zsmalloc pool variable and modification
of the variable is not serialized(through under class->lock).
There are two issues here:
1. the pages_compacted may not equal to total number of pages
freed(due to concurrently add).
2. zs_shrinker_scan may not return the correct number of pages
freed(issued by current shrinker).

The fix is simple:
1. account the number of pages freed in zs_compact locally.
2. use actomic variable pages_compacted to accumulate total number.

Link: https://lkml.kernel.org/r/20210202122235.26885-1-wu-yan@tcl.com
Fixes: 860c707dca155a56 ("zsmalloc: account the number of compacted pages")
Signed-off-by: Rokudo Yan <wu-yan@tcl.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/block/zram/zram_drv.c |    2 +-
 include/linux/zsmalloc.h      |    2 +-
 mm/zsmalloc.c                 |   17 +++++++++++------
 3 files changed, 13 insertions(+), 8 deletions(-)

--- a/drivers/block/zram/zram_drv.c
+++ b/drivers/block/zram/zram_drv.c
@@ -873,7 +873,7 @@ static ssize_t mm_stat_show(struct devic
 			zram->limit_pages << PAGE_SHIFT,
 			max_used << PAGE_SHIFT,
 			(u64)atomic64_read(&zram->stats.same_pages),
-			pool_stats.pages_compacted,
+			atomic_long_read(&pool_stats.pages_compacted),
 			(u64)atomic64_read(&zram->stats.huge_pages));
 	up_read(&zram->init_lock);
 
--- a/include/linux/zsmalloc.h
+++ b/include/linux/zsmalloc.h
@@ -36,7 +36,7 @@ enum zs_mapmode {
 
 struct zs_pool_stats {
 	/* How many pages were migrated (freed) */
-	unsigned long pages_compacted;
+	atomic_long_t pages_compacted;
 };
 
 struct zs_pool;
--- a/mm/zsmalloc.c
+++ b/mm/zsmalloc.c
@@ -2285,11 +2285,13 @@ static unsigned long zs_can_compact(stru
 	return obj_wasted * class->pages_per_zspage;
 }
 
-static void __zs_compact(struct zs_pool *pool, struct size_class *class)
+static unsigned long __zs_compact(struct zs_pool *pool,
+				  struct size_class *class)
 {
 	struct zs_compact_control cc;
 	struct zspage *src_zspage;
 	struct zspage *dst_zspage = NULL;
+	unsigned long pages_freed = 0;
 
 	spin_lock(&class->lock);
 	while ((src_zspage = isolate_zspage(class, true))) {
@@ -2319,7 +2321,7 @@ static void __zs_compact(struct zs_pool
 		putback_zspage(class, dst_zspage);
 		if (putback_zspage(class, src_zspage) == ZS_EMPTY) {
 			free_zspage(pool, class, src_zspage);
-			pool->stats.pages_compacted += class->pages_per_zspage;
+			pages_freed += class->pages_per_zspage;
 		}
 		spin_unlock(&class->lock);
 		cond_resched();
@@ -2330,12 +2332,15 @@ static void __zs_compact(struct zs_pool
 		putback_zspage(class, src_zspage);
 
 	spin_unlock(&class->lock);
+
+	return pages_freed;
 }
 
 unsigned long zs_compact(struct zs_pool *pool)
 {
 	int i;
 	struct size_class *class;
+	unsigned long pages_freed = 0;
 
 	for (i = ZS_SIZE_CLASSES - 1; i >= 0; i--) {
 		class = pool->size_class[i];
@@ -2343,10 +2348,11 @@ unsigned long zs_compact(struct zs_pool
 			continue;
 		if (class->index != i)
 			continue;
-		__zs_compact(pool, class);
+		pages_freed += __zs_compact(pool, class);
 	}
+	atomic_long_add(pages_freed, &pool->stats.pages_compacted);
 
-	return pool->stats.pages_compacted;
+	return pages_freed;
 }
 EXPORT_SYMBOL_GPL(zs_compact);
 
@@ -2363,13 +2369,12 @@ static unsigned long zs_shrinker_scan(st
 	struct zs_pool *pool = container_of(shrinker, struct zs_pool,
 			shrinker);
 
-	pages_freed = pool->stats.pages_compacted;
 	/*
 	 * Compact classes and calculate compaction delta.
 	 * Can run concurrently with a manually triggered
 	 * (by user) compaction.
 	 */
-	pages_freed = zs_compact(pool) - pages_freed;
+	pages_freed = zs_compact(pool);
 
 	return pages_freed ? pages_freed : SHRINK_STOP;
 }

[PATCH 4.19 49/52] swap: fix swapfile read/write offset

[Greg Kroah-Hartman]

From: Jens Axboe <axboe@kernel.dk>

commit caf6912f3f4af7232340d500a4a2008f81b93f14 upstream.

We're not factoring in the start of the file for where to write and
read the swapfile, which leads to very unfortunate side effects of
writing where we should not be...

[This issue only affects swapfiles on filesystems on top of blockdevs
that implement rw_page ops (brd, zram, btt, pmem), and not on top of any
other block devices, in contrast to the upstream commit fix.]

Fixes: dd6bd0d9c7db ("swap: use bdev_read_page() / bdev_write_page()")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Anthony Iliopoulos <ailiop@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 mm/page_io.c  |   11 +++--------
 mm/swapfile.c |    2 +-
 2 files changed, 4 insertions(+), 9 deletions(-)

--- a/mm/page_io.c
+++ b/mm/page_io.c
@@ -38,7 +38,6 @@ static struct bio *get_swap_bio(gfp_t gf
 
 		bio->bi_iter.bi_sector = map_swap_page(page, &bdev);
 		bio_set_dev(bio, bdev);
-		bio->bi_iter.bi_sector <<= PAGE_SHIFT - 9;
 		bio->bi_end_io = end_io;
 
 		for (i = 0; i < nr; i++)
@@ -262,11 +261,6 @@ out:
 	return ret;
 }
 
-static sector_t swap_page_sector(struct page *page)
-{
-	return (sector_t)__page_file_index(page) << (PAGE_SHIFT - 9);
-}
-
 static inline void count_swpout_vm_event(struct page *page)
 {
 #ifdef CONFIG_TRANSPARENT_HUGEPAGE
@@ -325,7 +319,8 @@ int __swap_writepage(struct page *page,
 		return ret;
 	}
 
-	ret = bdev_write_page(sis->bdev, swap_page_sector(page), page, wbc);
+	ret = bdev_write_page(sis->bdev, map_swap_page(page, &sis->bdev),
+			      page, wbc);
 	if (!ret) {
 		count_swpout_vm_event(page);
 		return 0;
@@ -376,7 +371,7 @@ int swap_readpage(struct page *page, boo
 		return ret;
 	}
 
-	ret = bdev_read_page(sis->bdev, swap_page_sector(page), page);
+	ret = bdev_read_page(sis->bdev, map_swap_page(page, &sis->bdev), page);
 	if (!ret) {
 		if (trylock_page(page)) {
 			swap_slot_free_notify(page);
--- a/mm/swapfile.c
+++ b/mm/swapfile.c
@@ -2305,7 +2305,7 @@ sector_t map_swap_page(struct page *page
 {
 	swp_entry_t entry;
 	entry.val = page_private(page);
-	return map_swap_entry(entry, bdev);
+	return map_swap_entry(entry, bdev) << (PAGE_SHIFT - 9);
 }
 
 /*

[PATCH 4.19 50/52] media: v4l: ioctl: Fix memory leak in video_usercopy

[Greg Kroah-Hartman]

From: Sakari Ailus <sakari.ailus@linux.intel.com>

commit fb18802a338b36f675a388fc03d2aa504a0d0899 upstream.

When an IOCTL with argument size larger than 128 that also used array
arguments were handled, two memory allocations were made but alas, only
the latter one of them was released. This happened because there was only
a single local variable to hold such a temporary allocation.

Fix this by adding separate variables to hold the pointers to the
temporary allocations.

Reported-by: Arnd Bergmann <arnd@kernel.org>
Reported-by: syzbot+1115e79c8df6472c612b@syzkaller.appspotmail.com
Fixes: d14e6d76ebf7 ("[media] v4l: Add multi-planar ioctl handling code")
Cc: stable@vger.kernel.org
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/media/v4l2-core/v4l2-ioctl.c |   19 +++++++------------
 1 file changed, 7 insertions(+), 12 deletions(-)

--- a/drivers/media/v4l2-core/v4l2-ioctl.c
+++ b/drivers/media/v4l2-core/v4l2-ioctl.c
@@ -2939,7 +2939,7 @@ video_usercopy(struct file *file, unsign
 	       v4l2_kioctl func)
 {
 	char	sbuf[128];
-	void    *mbuf = NULL;
+	void    *mbuf = NULL, *array_buf = NULL;
 	void	*parg = (void *)arg;
 	long	err  = -EINVAL;
 	bool	has_array_args;
@@ -2998,20 +2998,14 @@ video_usercopy(struct file *file, unsign
 	has_array_args = err;
 
 	if (has_array_args) {
-		/*
-		 * When adding new types of array args, make sure that the
-		 * parent argument to ioctl (which contains the pointer to the
-		 * array) fits into sbuf (so that mbuf will still remain
-		 * unused up to here).
-		 */
-		mbuf = kvmalloc(array_size, GFP_KERNEL);
+		array_buf = kvmalloc(array_size, GFP_KERNEL);
 		err = -ENOMEM;
-		if (NULL == mbuf)
+		if (array_buf == NULL)
 			goto out_array_args;
 		err = -EFAULT;
-		if (copy_from_user(mbuf, user_ptr, array_size))
+		if (copy_from_user(array_buf, user_ptr, array_size))
 			goto out_array_args;
-		*kernel_ptr = mbuf;
+		*kernel_ptr = array_buf;
 	}
 
 	/* Handles IOCTL */
@@ -3030,7 +3024,7 @@ video_usercopy(struct file *file, unsign
 
 	if (has_array_args) {
 		*kernel_ptr = (void __force *)user_ptr;
-		if (copy_to_user(user_ptr, mbuf, array_size))
+		if (copy_to_user(user_ptr, array_buf, array_size))
 			err = -EFAULT;
 		goto out_array_args;
 	}
@@ -3052,6 +3046,7 @@ out_array_args:
 	}
 
 out:
+	kvfree(array_buf);
 	kvfree(mbuf);
 	return err;
 }

[PATCH 4.19 51/52] ALSA: hda/realtek: Add quirk for Clevo NH55RZQ

[Greg Kroah-Hartman]

From: Eckhart Mohr <e.mohr@tuxedocomputers.com>

commit 48698c973e6b4dde94d87cd1ded56d9436e9c97d upstream.

This applies a SND_PCI_QUIRK(...) to the Clevo NH55RZQ barebone. This
fixes the issue of the device not recognizing a pluged in microphone.

The device has both, a microphone only jack, and a speaker + microphone
combo jack. The combo jack already works. The microphone-only jack does
not recognize when a device is pluged in without this patch.

Signed-off-by: Eckhart Mohr <e.mohr@tuxedocomputers.com>
Co-developed-by: Werner Sembach <wse@tuxedocomputers.com>
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/0eee6545-5169-ef08-6cfa-5def8cd48c86@tuxedocomputers.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/pci/hda/patch_realtek.c |    1 +
 1 file changed, 1 insertion(+)

--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -7179,6 +7179,7 @@ static const struct snd_pci_quirk alc269
 	SND_PCI_QUIRK(0x1558, 0x8551, "System76 Gazelle (gaze14)", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1558, 0x8560, "System76 Gazelle (gaze14)", ALC269_FIXUP_HEADSET_MIC),
 	SND_PCI_QUIRK(0x1558, 0x8561, "System76 Gazelle (gaze14)", ALC269_FIXUP_HEADSET_MIC),
+	SND_PCI_QUIRK(0x1558, 0x8562, "Clevo NH[5|7][0-9]RZ[Q]", ALC269_FIXUP_DMIC),
 	SND_PCI_QUIRK(0x1558, 0x8668, "Clevo NP50B[BE]", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1558, 0x8680, "Clevo NJ50LU", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1558, 0x8686, "Clevo NH50[CZ]U", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),

[PATCH 4.19 52/52] ALSA: hda/realtek: Apply dual codec quirks for MSI Godlike X570 board

[Greg Kroah-Hartman]

From: Takashi Iwai <tiwai@suse.de>

commit 26af17722a07597d3e556eda92c6fce8d528bc9f upstream.

There is another MSI board (1462:cc34) that has dual Realtek codecs,
and we need to apply the existing quirk for fixing the conflicts of
Master control.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=211743
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210303142346.28182-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/pci/hda/patch_realtek.c |    1 +
 1 file changed, 1 insertion(+)

--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -2507,6 +2507,7 @@ static const struct snd_pci_quirk alc882
 	SND_PCI_QUIRK(0x1462, 0x1276, "MSI-GL73", ALC1220_FIXUP_CLEVO_P950),
 	SND_PCI_QUIRK(0x1462, 0x1293, "MSI-GP65", ALC1220_FIXUP_CLEVO_P950),
 	SND_PCI_QUIRK(0x1462, 0x7350, "MSI-7350", ALC889_FIXUP_CD),
+	SND_PCI_QUIRK(0x1462, 0xcc34, "MSI Godlike X570", ALC1220_FIXUP_GB_DUAL_CODECS),
 	SND_PCI_QUIRK(0x1462, 0xda57, "MSI Z270-Gaming", ALC1220_FIXUP_GB_DUAL_CODECS),
 	SND_PCI_QUIRK_VENDOR(0x1462, "MSI", ALC882_FIXUP_GPIO3),
 	SND_PCI_QUIRK(0x147b, 0x107a, "Abit AW9D-MAX", ALC882_FIXUP_ABIT_AW9D_MAX),

Re: [PATCH 4.19 00/52] 4.19.179-rc1 review

[Jon Hunter]

On Fri, 05 Mar 2021 13:21:31 +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.179 release.
> There are 52 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sun, 07 Mar 2021 12:08:39 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.179-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

All tests passing for Tegra ...

Test results for stable-v4.19:
    12 builds:	12 pass, 0 fail
    22 boots:	22 pass, 0 fail
    38 tests:	38 pass, 0 fail

Linux version:	4.19.179-rc1-g1112456421ca
Boards tested:	tegra124-jetson-tk1, tegra186-p2771-0000,
                tegra194-p2972-0000, tegra20-ventana,
                tegra210-p2371-2180, tegra30-cardhu-a04

Tested-by: Jon Hunter <jonathanh@nvidia.com>

Jon

Re: [PATCH 4.19 00/52] 4.19.179-rc1 review

[Samuel Zou]

On 2021/3/5 20:21, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.179 release.
> There are 52 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sun, 07 Mar 2021 12:08:39 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.179-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

Tested on arm64 and x86 for 4.19.179-rc1,

Kernel repo: 
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Branch: linux-4.19.y
Version: 4.19.179-rc1+
Commit: 1112456421caf2562801d760aef4da53915246c0
Compiler: gcc version 7.3.0 (GCC)


arm64 (No kernel failures)
--------------------------------------------------------------------
Testcase Result Summary:
total_num: 4674
succeed_num: 4715
failed_num: 1
timeout_num: 0

x86 (No kernel failures)
--------------------------------------------------------------------
Testcase Result Summary:
total_num: 4674
succeed_num: 4670
failed_num: 4
timeout_num: 0

Tested-by: Hulk Robot <hulkci@huawei.com>

Re: [PATCH 4.19 00/52] 4.19.179-rc1 review

[Naresh Kamboju]

On Fri, 5 Mar 2021 at 18:08, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 4.19.179 release.
> There are 52 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sun, 07 Mar 2021 12:08:39 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.179-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>

Summary
------------------------------------------------------------------------

kernel: 4.19.179-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.19.y
git commit: 1112456421caf2562801d760aef4da53915246c0
git describe: v4.19.178-53-g1112456421ca
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-4.19.y/build/v4.19.178-53-g1112456421ca

No regressions (compared to build v4.19.178)

No fixes (compared to build v4.19.178)

Ran 59275 total tests in the following environments and test suites.

Environments
--------------
- arm
- arm64
- dragonboard-410c - arm64
- hi6220-hikey - arm64
- i386
- juno-r2 - arm64
- juno-r2-compat
- juno-r2-kasan
- mips
- qemu-arm64-clang
- qemu-arm64-kasan
- qemu-x86_64-clang
- qemu-x86_64-kasan
- qemu_arm
- qemu_arm64
- qemu_arm64-compat
- qemu_i386
- qemu_x86_64
- qemu_x86_64-compat
- s390
- sparc
- x15 - arm
- x86_64
- x86-kasan
- x86_64

Test Suites
-----------
* build
* linux-log-parser
* install-android-platform-tools-r2600
* kselftest-
* kselftest-android
* kselftest-bpf
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-firmware
* kselftest-fpu
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-lib
* kselftest-livepatch
* kselftest-membarrier
* kselftest-memfd
* kselftest-memory-hotplug
* kselftest-mincore
* kselftest-mount
* kselftest-mqueue
* kselftest-openat2
* kselftest-pid_namespace
* kselftest-pidfd
* kselftest-proc
* kselftest-pstore
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* libhugetlbfs
* ltp-controllers-tests
* ltp-dio-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-securebits-tests
* ltp-tracing-tests
* perf
* v4l2-compliance
* fwts
* kselftest-lkdtm
* kselftest-net
* kselftest-netfilter
* kselftest-nsfs
* kselftest-tc-testing
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-zram
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-hugetlb-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-syscalls-tests
* network-basic-tests
* kselftest-kexec
* kselftest-kvm
* kselftest-vm
* kselftest-x86
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-open-posix-tests
* ltp-sched-tests
* kvm-unit-tests
* rcutorture
* ssuite
* kselftest-vsyscall-mode-native-
* kselftest-vsyscall-mode-none-

-- 
Linaro LKFT
https://lkft.linaro.org

Re: [PATCH 4.19 00/52] 4.19.179-rc1 review

[Guenter Roeck]

On Fri, Mar 05, 2021 at 01:21:31PM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.179 release.
> There are 52 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sun, 07 Mar 2021 12:08:39 +0000.
> Anything received after that time might be too late.
> 

Build results:
	total: 155 pass: 155 fail: 0
Qemu test results:
	total: 420 pass: 420 fail: 0

Tested-by: Guenter Roeck <linux@roeck-us.net>

Guenter

Re: [PATCH 4.19 00/52] 4.19.179-rc1 review

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 658 bytes --]

Hi!

> This is the start of the stable review cycle for the 4.19.179 release.
> There are 52 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.

CIP testing did not find any problems here (apart from missing boards
-- not a kernel problem):

https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/tree/linux-4.19.y

Tested-by: Pavel Machek (CIP) <pavel@denx.de>

Best regards,
								Pavel
-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 181 bytes --]