From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Hans de Goede <hdegoede@redhat.com>,
Andy Shevchenko <andy.shevchenko@gmail.com>,
Charles Keepax <ckeepax@opensource.cirrus.com>,
Chanwoo Choi <cw00.choi@samsung.com>,
Lee Jones <lee.jones@linaro.org>, Sasha Levin <sashal@kernel.org>
Subject: [PATCH AUTOSEL 5.4 13/57] extcon: arizona: Fix various races on driver unbind
Date: Mon, 3 May 2021 12:38:57 -0400 [thread overview]
Message-ID: <20210503163941.2853291-13-sashal@kernel.org> (raw)
In-Reply-To: <20210503163941.2853291-1-sashal@kernel.org>
From: Hans de Goede <hdegoede@redhat.com>
[ Upstream commit e5b499f6fb17bc95a813e85d0796522280203806 ]
We must free/disable all interrupts and cancel all pending works
before doing further cleanup.
Before this commit arizona_extcon_remove() was doing several
register writes to shut things down before disabling the IRQs
and it was cancelling only 1 of the 3 different works used.
Move all the register-writes shutting things down to after
the disabling of the IRQs and add the 2 missing
cancel_delayed_work_sync() calls.
This fixes various possible races on driver unbind. One of which
would always trigger on devices using the mic-clamp feature for
jack detection. The ARIZONA_MICD_CLAMP_MODE_MASK update was
done before disabling the IRQs, causing:
1. arizona_jackdet() to run
2. detect a jack being inserted (clamp disabled means jack inserted)
3. call arizona_start_mic() which:
3.1 Enables the MICVDD regulator
3.2 takes a pm_runtime_reference
And this was all happening after the ARIZONA_MICD_ENA bit clearing,
which would undo 3.1 and 3.2 because the ARIZONA_MICD_CLAMP_MODE_MASK
update was being done after the ARIZONA_MICD_ENA bit clearing.
So this means that arizona_extcon_remove() would exit with
1. MICVDD enabled and 2. The pm_runtime_reference being unbalanced.
MICVDD still being enabled caused the following oops when the
regulator is released by the devm framework:
[ 2850.745757] ------------[ cut here ]------------
[ 2850.745827] WARNING: CPU: 2 PID: 2098 at drivers/regulator/core.c:2123 _regulator_put.part.0+0x19f/0x1b0
[ 2850.745835] Modules linked in: extcon_arizona ...
...
[ 2850.746909] Call Trace:
[ 2850.746932] regulator_put+0x2d/0x40
[ 2850.746946] release_nodes+0x22a/0x260
[ 2850.746984] __device_release_driver+0x190/0x240
[ 2850.747002] driver_detach+0xd4/0x120
...
[ 2850.747337] ---[ end trace f455dfd7abd9781f ]---
Note this oops is just one of various theoretically possible races caused
by the wrong ordering inside arizona_extcon_remove(), this fixes the
ordering fixing all possible races, including the reported oops.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/extcon/extcon-arizona.c | 40 +++++++++++++++++----------------
1 file changed, 21 insertions(+), 19 deletions(-)
diff --git a/drivers/extcon/extcon-arizona.c b/drivers/extcon/extcon-arizona.c
index 7f1cd61443ff..9a6103ac7118 100644
--- a/drivers/extcon/extcon-arizona.c
+++ b/drivers/extcon/extcon-arizona.c
@@ -1725,25 +1725,6 @@ static int arizona_extcon_remove(struct platform_device *pdev)
bool change;
int ret;
- ret = regmap_update_bits_check(arizona->regmap, ARIZONA_MIC_DETECT_1,
- ARIZONA_MICD_ENA, 0,
- &change);
- if (ret < 0) {
- dev_err(&pdev->dev, "Failed to disable micd on remove: %d\n",
- ret);
- } else if (change) {
- regulator_disable(info->micvdd);
- pm_runtime_put(info->dev);
- }
-
- gpiod_put(info->micd_pol_gpio);
-
- pm_runtime_disable(&pdev->dev);
-
- regmap_update_bits(arizona->regmap,
- ARIZONA_MICD_CLAMP_CONTROL,
- ARIZONA_MICD_CLAMP_MODE_MASK, 0);
-
if (info->micd_clamp) {
jack_irq_rise = ARIZONA_IRQ_MICD_CLAMP_RISE;
jack_irq_fall = ARIZONA_IRQ_MICD_CLAMP_FALL;
@@ -1759,10 +1740,31 @@ static int arizona_extcon_remove(struct platform_device *pdev)
arizona_free_irq(arizona, jack_irq_rise, info);
arizona_free_irq(arizona, jack_irq_fall, info);
cancel_delayed_work_sync(&info->hpdet_work);
+ cancel_delayed_work_sync(&info->micd_detect_work);
+ cancel_delayed_work_sync(&info->micd_timeout_work);
+
+ ret = regmap_update_bits_check(arizona->regmap, ARIZONA_MIC_DETECT_1,
+ ARIZONA_MICD_ENA, 0,
+ &change);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Failed to disable micd on remove: %d\n",
+ ret);
+ } else if (change) {
+ regulator_disable(info->micvdd);
+ pm_runtime_put(info->dev);
+ }
+
+ regmap_update_bits(arizona->regmap,
+ ARIZONA_MICD_CLAMP_CONTROL,
+ ARIZONA_MICD_CLAMP_MODE_MASK, 0);
regmap_update_bits(arizona->regmap, ARIZONA_JACK_DETECT_ANALOGUE,
ARIZONA_JD1_ENA, 0);
arizona_clk32k_disable(arizona);
+ gpiod_put(info->micd_pol_gpio);
+
+ pm_runtime_disable(&pdev->dev);
+
return 0;
}
--
2.30.2
next prev parent reply other threads:[~2021-05-03 16:50 UTC|newest]
Thread overview: 57+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-03 16:38 [PATCH AUTOSEL 5.4 01/57] drm: Added orientation quirk for OneGX1 Pro Sasha Levin
2021-05-03 16:38 ` [PATCH AUTOSEL 5.4 02/57] drm/qxl: release shadow on shutdown Sasha Levin
2021-05-03 16:38 ` [PATCH AUTOSEL 5.4 03/57] drm/amd/display: Check for DSC support instead of ASIC revision Sasha Levin
2021-05-03 16:38 ` [PATCH AUTOSEL 5.4 04/57] drm/amd/display: Don't optimize bandwidth before disabling planes Sasha Levin
2021-05-03 16:38 ` [PATCH AUTOSEL 5.4 05/57] scsi: lpfc: Fix incorrect dbde assignment when building target abts wqe Sasha Levin
2021-05-03 16:38 ` [PATCH AUTOSEL 5.4 06/57] scsi: lpfc: Fix pt2pt connection does not recover after LOGO Sasha Levin
2021-05-03 16:38 ` [PATCH AUTOSEL 5.4 07/57] scsi: target: pscsi: Fix warning in pscsi_complete_cmd() Sasha Levin
2021-05-03 16:38 ` [PATCH AUTOSEL 5.4 08/57] media: ite-cir: check for receive overflow Sasha Levin
2021-05-03 16:38 ` [PATCH AUTOSEL 5.4 09/57] media: drivers: media: pci: sta2x11: fix Kconfig dependency on GPIOLIB Sasha Levin
2021-05-03 16:38 ` [PATCH AUTOSEL 5.4 10/57] media: imx: capture: Return -EPIPE from __capture_legacy_try_fmt() Sasha Levin
2021-05-03 16:38 ` [PATCH AUTOSEL 5.4 11/57] power: supply: bq27xxx: fix power_avg for newer ICs Sasha Levin
2021-05-03 16:38 ` [PATCH AUTOSEL 5.4 12/57] extcon: arizona: Fix some issues when HPDET IRQ fires after the jack has been unplugged Sasha Levin
2021-05-03 16:38 ` Sasha Levin [this message]
2021-05-03 16:38 ` [PATCH AUTOSEL 5.4 14/57] media: media/saa7164: fix saa7164_encoder_register() memory leak bugs Sasha Levin
2021-05-03 16:38 ` [PATCH AUTOSEL 5.4 15/57] media: gspca/sq905.c: fix uninitialized variable Sasha Levin
2021-05-03 16:39 ` [PATCH AUTOSEL 5.4 16/57] media: pci: saa7164: Rudimentary spelling fixes in the file saa7164-types.h Sasha Levin
2021-05-03 16:39 ` [PATCH AUTOSEL 5.4 17/57] power: supply: Use IRQF_ONESHOT Sasha Levin
2021-05-03 16:39 ` [PATCH AUTOSEL 5.4 18/57] drm/bridge/analogix/anx78xx: Setup encoder before registering connector Sasha Levin
2021-05-03 16:39 ` [PATCH AUTOSEL 5.4 19/57] drm/bridge/analogix/anx78xx: Cleanup on error in anx78xx_bridge_attach() Sasha Levin
2021-05-03 16:39 ` [PATCH AUTOSEL 5.4 20/57] drm/amdgpu: mask the xgmi number of hops reported from psp to kfd Sasha Levin
2021-05-03 16:39 ` [PATCH AUTOSEL 5.4 21/57] drm/amdkfd: Fix UBSAN shift-out-of-bounds warning Sasha Levin
2021-05-03 16:39 ` [PATCH AUTOSEL 5.4 22/57] drm/amdgpu : Fix asic reset regression issue introduce by 8f211fe8ac7c4f Sasha Levin
2021-05-03 16:39 ` [PATCH AUTOSEL 5.4 23/57] drm/amd/display: Fix UBSAN warning for not a valid value for type '_Bool' Sasha Levin
2021-05-03 16:39 ` [PATCH AUTOSEL 5.4 24/57] drm/amd/display: fix dml prefetch validation Sasha Levin
2021-05-03 16:39 ` [PATCH AUTOSEL 5.4 25/57] scsi: qla2xxx: Always check the return value of qla24xx_get_isp_stats() Sasha Levin
2021-05-03 16:39 ` [PATCH AUTOSEL 5.4 26/57] drm/vkms: fix misuse of WARN_ON Sasha Levin
2021-05-03 16:39 ` [PATCH AUTOSEL 5.4 27/57] scsi: qla2xxx: Fix use after free in bsg Sasha Levin
2021-05-03 16:39 ` [PATCH AUTOSEL 5.4 28/57] mmc: sdhci-pci: Add PCI IDs for Intel LKF Sasha Levin
2021-05-03 16:39 ` [PATCH AUTOSEL 5.4 29/57] ata: ahci: Disable SXS for Hisilicon Kunpeng920 Sasha Levin
2021-05-03 16:39 ` [PATCH AUTOSEL 5.4 30/57] scsi: smartpqi: Correct request leakage during reset operations Sasha Levin
2021-05-03 16:39 ` [PATCH AUTOSEL 5.4 31/57] scsi: smartpqi: Add new PCI IDs Sasha Levin
2021-05-03 16:39 ` [PATCH AUTOSEL 5.4 32/57] scsi: scsi_dh_alua: Remove check for ASC 24h in alua_rtpg() Sasha Levin
2021-05-03 16:39 ` [PATCH AUTOSEL 5.4 33/57] media: em28xx: fix memory leak Sasha Levin
2021-05-03 16:39 ` [PATCH AUTOSEL 5.4 34/57] media: vivid: update EDID Sasha Levin
2021-05-03 16:39 ` [PATCH AUTOSEL 5.4 35/57] clk: socfpga: arria10: Fix memory leak of socfpga_clk on error return Sasha Levin
2021-05-03 16:39 ` [PATCH AUTOSEL 5.4 36/57] power: supply: generic-adc-battery: fix possible use-after-free in gab_remove() Sasha Levin
2021-05-03 16:39 ` [PATCH AUTOSEL 5.4 37/57] power: supply: s3c_adc_battery: fix possible use-after-free in s3c_adc_bat_remove() Sasha Levin
2021-05-03 16:39 ` [PATCH AUTOSEL 5.4 38/57] media: tc358743: fix possible use-after-free in tc358743_remove() Sasha Levin
2021-05-03 16:39 ` [PATCH AUTOSEL 5.4 39/57] media: adv7604: fix possible use-after-free in adv76xx_remove() Sasha Levin
2021-05-03 16:39 ` [PATCH AUTOSEL 5.4 40/57] media: i2c: adv7511-v4l2: fix possible use-after-free in adv7511_remove() Sasha Levin
2021-05-03 16:39 ` [PATCH AUTOSEL 5.4 41/57] media: i2c: tda1997: Fix possible use-after-free in tda1997x_remove() Sasha Levin
2021-05-03 16:39 ` [PATCH AUTOSEL 5.4 42/57] media: i2c: adv7842: fix possible use-after-free in adv7842_remove() Sasha Levin
2021-05-03 16:39 ` [PATCH AUTOSEL 5.4 43/57] media: platform: sti: Fix runtime PM imbalance in regs_show Sasha Levin
2021-05-03 16:39 ` [PATCH AUTOSEL 5.4 44/57] media: dvb-usb: fix memory leak in dvb_usb_adapter_init Sasha Levin
2021-05-03 16:39 ` [PATCH AUTOSEL 5.4 45/57] media: gscpa/stv06xx: fix memory leak Sasha Levin
2021-05-03 16:39 ` [PATCH AUTOSEL 5.4 46/57] sched/fair: Ignore percpu threads for imbalance pulls Sasha Levin
2021-05-03 16:39 ` [PATCH AUTOSEL 5.4 47/57] drm/msm/mdp5: Configure PP_SYNC_HEIGHT to double the vtotal Sasha Levin
2021-05-03 16:39 ` [PATCH AUTOSEL 5.4 48/57] drm/msm/mdp5: Do not multiply vclk line count by 100 Sasha Levin
2021-05-03 16:39 ` [PATCH AUTOSEL 5.4 49/57] drm/amdkfd: Fix cat debugfs hang_hws file causes system crash bug Sasha Levin
2021-05-03 16:39 ` [PATCH AUTOSEL 5.4 50/57] amdgpu: avoid incorrect %hu format string Sasha Levin
2021-05-03 16:39 ` [PATCH AUTOSEL 5.4 51/57] drm/amdgpu: fix NULL pointer dereference Sasha Levin
2021-05-03 16:39 ` [PATCH AUTOSEL 5.4 52/57] scsi: lpfc: Fix crash when a REG_RPI mailbox fails triggering a LOGO response Sasha Levin
2021-05-03 16:39 ` [PATCH AUTOSEL 5.4 53/57] scsi: lpfc: Fix error handling for mailboxes completed in MBX_POLL mode Sasha Levin
2021-05-03 16:39 ` [PATCH AUTOSEL 5.4 54/57] scsi: lpfc: Remove unsupported mbox PORT_CAPABILITIES logic Sasha Levin
2021-05-03 16:39 ` [PATCH AUTOSEL 5.4 55/57] mfd: arizona: Fix rumtime PM imbalance on error Sasha Levin
2021-05-03 16:39 ` [PATCH AUTOSEL 5.4 56/57] scsi: libfc: Fix a format specifier Sasha Levin
2021-05-03 16:39 ` [PATCH AUTOSEL 5.4 57/57] s390/archrandom: add parameter check for s390_arch_random_generate Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210503163941.2853291-13-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=andy.shevchenko@gmail.com \
--cc=ckeepax@opensource.cirrus.com \
--cc=cw00.choi@samsung.com \
--cc=hdegoede@redhat.com \
--cc=lee.jones@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox