[PATCH 5.13 22/35] ASoC: rt5682: Fix the issue of garbled recording after powerd_dbus_suspend

[Greg Kroah-Hartman <gregkh@linuxfoundation.org>]

From: Oder Chiou <oder_chiou@realtek.com>

[ Upstream commit 6a503e1c455316fd0bfd8188c0a62cce7c5525ca ]

While using the DMIC recording, the garbled data will be captured by the
DMIC. It is caused by the critical power of PLL closed in the jack detect
function.

Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
Link: https://lore.kernel.org/r/20210716085853.20170-1-oder_chiou@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/rt5682.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/sound/soc/codecs/rt5682.c b/sound/soc/codecs/rt5682.c
index e4c91571abae..abcd6f483788 100644
--- a/sound/soc/codecs/rt5682.c
+++ b/sound/soc/codecs/rt5682.c
@@ -973,10 +973,14 @@ int rt5682_headset_detect(struct snd_soc_component *component, int jack_insert)
 		rt5682_enable_push_button_irq(component, false);
 		snd_soc_component_update_bits(component, RT5682_CBJ_CTRL_1,
 			RT5682_TRIG_JD_MASK, RT5682_TRIG_JD_LOW);
-		if (!snd_soc_dapm_get_pin_status(dapm, "MICBIAS"))
+		if (!snd_soc_dapm_get_pin_status(dapm, "MICBIAS") &&
+			!snd_soc_dapm_get_pin_status(dapm, "PLL1") &&
+			!snd_soc_dapm_get_pin_status(dapm, "PLL2B"))
 			snd_soc_component_update_bits(component,
 				RT5682_PWR_ANLG_1, RT5682_PWR_MB, 0);
-		if (!snd_soc_dapm_get_pin_status(dapm, "Vref2"))
+		if (!snd_soc_dapm_get_pin_status(dapm, "Vref2") &&
+			!snd_soc_dapm_get_pin_status(dapm, "PLL1") &&
+			!snd_soc_dapm_get_pin_status(dapm, "PLL2B"))
 			snd_soc_component_update_bits(component,
 				RT5682_PWR_ANLG_1, RT5682_PWR_VREF2, 0);
 		snd_soc_component_update_bits(component, RT5682_PWR_ANLG_3,
-- 
2.30.2