From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
stable@vger.kernel.org, Larry Finger <Larry.Finger@lwfinger.net>,
Marcel Holtmann <marcel@holtmann.org>
Subject: [PATCH 5.13 09/22] Bluetooth: Add additional Bluetooth part for Realtek 8852AE
Date: Fri, 10 Sep 2021 14:30:08 +0200 [thread overview]
Message-ID: <20210910122916.244533398@linuxfoundation.org> (raw)
In-Reply-To: <20210910122915.942645251@linuxfoundation.org>
From: Larry Finger <Larry.Finger@lwfinger.net>
commit 6eefec4a0b668de9bbb33bd3e7acfbcc794162b0 upstream.
This Realtek device has both wifi and BT components. The latter reports
a USB ID of 04ca:4006, which is not in the table.
The portion of /sys/kernel/debug/usb/devices pertaining to this device is
T: Bus=02 Lev=01 Prnt=01 Port=12 Cnt=04 Dev#= 4 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=04ca ProdID=4006 Rev= 0.00
S: Manufacturer=Realtek
S: Product=Bluetooth Radio
S: SerialNumber=00e04c000001
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Stable <stable@vger.kernel.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/bluetooth/btusb.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -443,6 +443,10 @@ static const struct usb_device_id blackl
/* Additional Realtek 8822CE Bluetooth devices */
{ USB_DEVICE(0x04ca, 0x4005), .driver_info = BTUSB_REALTEK |
BTUSB_WIDEBAND_SPEECH },
+ /* Bluetooth component of Realtek 8852AE device */
+ { USB_DEVICE(0x04ca, 0x4006), .driver_info = BTUSB_REALTEK |
+ BTUSB_WIDEBAND_SPEECH },
+
{ USB_DEVICE(0x04c5, 0x161f), .driver_info = BTUSB_REALTEK |
BTUSB_WIDEBAND_SPEECH },
{ USB_DEVICE(0x0b05, 0x18ef), .driver_info = BTUSB_REALTEK |
next prev parent reply other threads:[~2021-09-10 12:33 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-09-10 12:29 [PATCH 5.13 00/22] 5.13.16-rc1 review Greg Kroah-Hartman
2021-09-10 12:30 ` [PATCH 5.13 01/22] firmware: dmi: Move product_sku info to the end of the modalias Greg Kroah-Hartman
2021-09-10 12:30 ` [PATCH 5.13 02/22] igmp: Add ip_mc_list lock in ip_check_mc_rcu Greg Kroah-Hartman
2021-09-10 12:30 ` [PATCH 5.13 03/22] net: ll_temac: Remove left-over debug message Greg Kroah-Hartman
2021-09-10 12:30 ` [PATCH 5.13 04/22] Revert "r8169: avoid link-up interrupt issue on RTL8106e if user enables ASPM" Greg Kroah-Hartman
2021-09-10 12:30 ` [PATCH 5.13 05/22] blk-mq: fix kernel panic during iterating over flush request Greg Kroah-Hartman
2021-09-10 12:30 ` [PATCH 5.13 06/22] blk-mq: fix is_flush_rq Greg Kroah-Hartman
2021-09-10 12:30 ` [PATCH 5.13 07/22] blk-mq: clearing flush request reference in tags->rqs[] Greg Kroah-Hartman
2021-09-10 12:30 ` [PATCH 5.13 08/22] ALSA: usb-audio: Add registration quirk for JBL Quantum 800 Greg Kroah-Hartman
2021-09-10 12:30 ` Greg Kroah-Hartman [this message]
2021-09-10 12:30 ` [PATCH 5.13 10/22] Bluetooth: btusb: Make the CSR clone chip force-suspend workaround more generic Greg Kroah-Hartman
2021-09-10 12:30 ` [PATCH 5.13 11/22] usb: host: xhci-rcar: Dont reload firmware after the completion Greg Kroah-Hartman
2021-09-10 12:30 ` [PATCH 5.13 12/22] usb: xhci-mtk: fix issue of out-of-bounds array access Greg Kroah-Hartman
2021-09-10 12:30 ` [PATCH 5.13 13/22] usb: cdnsp: fix the wrong mult value for HS isoc or intr Greg Kroah-Hartman
2021-09-10 12:30 ` [PATCH 5.13 14/22] usb: gadget: tegra-xudc: " Greg Kroah-Hartman
2021-09-10 12:30 ` [PATCH 5.13 15/22] usb: mtu3: restore HS function when set SS/SSP Greg Kroah-Hartman
2021-09-10 12:30 ` [PATCH 5.13 16/22] usb: mtu3: use @mult for HS isoc or intr Greg Kroah-Hartman
2021-09-10 12:30 ` [PATCH 5.13 17/22] usb: mtu3: fix the wrong HS mult value Greg Kroah-Hartman
2021-09-10 12:30 ` [PATCH 5.13 18/22] xhci: fix even more unsafe memory usage in xhci tracing Greg Kroah-Hartman
2021-09-10 12:30 ` [PATCH 5.13 19/22] xhci: fix " Greg Kroah-Hartman
2021-09-10 12:30 ` [PATCH 5.13 20/22] xhci: Fix failure to give back some cached cancelled URBs Greg Kroah-Hartman
2021-09-10 12:30 ` [PATCH 5.13 21/22] x86/reboot: Limit Dell Optiplex 990 quirk to early BIOS versions Greg Kroah-Hartman
2021-09-10 12:30 ` [PATCH 5.13 22/22] PCI: Call Max Payload Size-related fixup quirks early Greg Kroah-Hartman
2021-09-10 18:38 ` [PATCH 5.13 00/22] 5.13.16-rc1 review Fox Chen
2021-09-10 19:43 ` Florian Fainelli
2021-09-10 23:17 ` Shuah Khan
2021-09-11 16:20 ` Justin Forbes
2021-09-11 19:36 ` Guenter Roeck
2021-09-12 0:48 ` Daniel Díaz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210910122916.244533398@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=Larry.Finger@lwfinger.net \
--cc=linux-kernel@vger.kernel.org \
--cc=marcel@holtmann.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).