From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Rakesh Babu <rsaladi2@marvell.com>,
Subbaraya Sundeep <sbhatta@marvell.com>,
Sunil Goutham <sgoutham@marvell.com>,
"David S . Miller" <davem@davemloft.net>,
Sasha Levin <sashal@kernel.org>,
gakula@marvell.com, hkelam@marvell.com, kuba@kernel.org,
netdev@vger.kernel.org
Subject: [PATCH AUTOSEL 5.15 037/146] octeontx2-pf: Enable promisc/allmulti match MCAM entries.
Date: Mon, 8 Nov 2021 12:43:04 -0500 [thread overview]
Message-ID: <20211108174453.1187052-37-sashal@kernel.org> (raw)
In-Reply-To: <20211108174453.1187052-1-sashal@kernel.org>
From: Rakesh Babu <rsaladi2@marvell.com>
[ Upstream commit ffd2f89ad05cd620d822112a07b0c5669fa9e333 ]
Whenever the interface is brought up/down then set_rx_mode
function is called by the stack which enables promisc/allmulti
MCAM entries. But there are cases when driver brings
interface down and then up such as while changing number
of channels. In these cases promisc/allmulti MCAM entries
are left disabled as set_rx_mode callback is not called.
This patch enables these MCAM entries in all such cases.
Signed-off-by: Rakesh Babu <rsaladi2@marvell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
.../ethernet/marvell/octeontx2/nic/otx2_pf.c | 78 ++++++++++---------
1 file changed, 43 insertions(+), 35 deletions(-)
diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c
index 53df7fff92c40..53a3e8de1a51e 100644
--- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c
@@ -1493,6 +1493,44 @@ static void otx2_free_hw_resources(struct otx2_nic *pf)
mutex_unlock(&mbox->lock);
}
+static void otx2_do_set_rx_mode(struct otx2_nic *pf)
+{
+ struct net_device *netdev = pf->netdev;
+ struct nix_rx_mode *req;
+ bool promisc = false;
+
+ if (!(netdev->flags & IFF_UP))
+ return;
+
+ if ((netdev->flags & IFF_PROMISC) ||
+ (netdev_uc_count(netdev) > OTX2_MAX_UNICAST_FLOWS)) {
+ promisc = true;
+ }
+
+ /* Write unicast address to mcam entries or del from mcam */
+ if (!promisc && netdev->priv_flags & IFF_UNICAST_FLT)
+ __dev_uc_sync(netdev, otx2_add_macfilter, otx2_del_macfilter);
+
+ mutex_lock(&pf->mbox.lock);
+ req = otx2_mbox_alloc_msg_nix_set_rx_mode(&pf->mbox);
+ if (!req) {
+ mutex_unlock(&pf->mbox.lock);
+ return;
+ }
+
+ req->mode = NIX_RX_MODE_UCAST;
+
+ if (promisc)
+ req->mode |= NIX_RX_MODE_PROMISC;
+ if (netdev->flags & (IFF_ALLMULTI | IFF_MULTICAST))
+ req->mode |= NIX_RX_MODE_ALLMULTI;
+
+ req->mode |= NIX_RX_MODE_USE_MCE;
+
+ otx2_sync_mbox_msg(&pf->mbox);
+ mutex_unlock(&pf->mbox.lock);
+}
+
int otx2_open(struct net_device *netdev)
{
struct otx2_nic *pf = netdev_priv(netdev);
@@ -1646,6 +1684,8 @@ int otx2_open(struct net_device *netdev)
if (err)
goto err_tx_stop_queues;
+ otx2_do_set_rx_mode(pf);
+
return 0;
err_tx_stop_queues:
@@ -1791,43 +1831,11 @@ static void otx2_set_rx_mode(struct net_device *netdev)
queue_work(pf->otx2_wq, &pf->rx_mode_work);
}
-static void otx2_do_set_rx_mode(struct work_struct *work)
+static void otx2_rx_mode_wrk_handler(struct work_struct *work)
{
struct otx2_nic *pf = container_of(work, struct otx2_nic, rx_mode_work);
- struct net_device *netdev = pf->netdev;
- struct nix_rx_mode *req;
- bool promisc = false;
-
- if (!(netdev->flags & IFF_UP))
- return;
-
- if ((netdev->flags & IFF_PROMISC) ||
- (netdev_uc_count(netdev) > OTX2_MAX_UNICAST_FLOWS)) {
- promisc = true;
- }
- /* Write unicast address to mcam entries or del from mcam */
- if (!promisc && netdev->priv_flags & IFF_UNICAST_FLT)
- __dev_uc_sync(netdev, otx2_add_macfilter, otx2_del_macfilter);
-
- mutex_lock(&pf->mbox.lock);
- req = otx2_mbox_alloc_msg_nix_set_rx_mode(&pf->mbox);
- if (!req) {
- mutex_unlock(&pf->mbox.lock);
- return;
- }
-
- req->mode = NIX_RX_MODE_UCAST;
-
- if (promisc)
- req->mode |= NIX_RX_MODE_PROMISC;
- if (netdev->flags & (IFF_ALLMULTI | IFF_MULTICAST))
- req->mode |= NIX_RX_MODE_ALLMULTI;
-
- req->mode |= NIX_RX_MODE_USE_MCE;
-
- otx2_sync_mbox_msg(&pf->mbox);
- mutex_unlock(&pf->mbox.lock);
+ otx2_do_set_rx_mode(pf);
}
static int otx2_set_features(struct net_device *netdev,
@@ -2358,7 +2366,7 @@ static int otx2_wq_init(struct otx2_nic *pf)
if (!pf->otx2_wq)
return -ENOMEM;
- INIT_WORK(&pf->rx_mode_work, otx2_do_set_rx_mode);
+ INIT_WORK(&pf->rx_mode_work, otx2_rx_mode_wrk_handler);
INIT_WORK(&pf->reset_task, otx2_reset_task);
return 0;
}
--
2.33.0
next prev parent reply other threads:[~2021-11-09 1:01 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-08 17:42 [PATCH AUTOSEL 5.15 001/146] dma-buf: WARN on dmabuf release with pending attachments Sasha Levin
2021-11-08 17:42 ` [PATCH AUTOSEL 5.15 002/146] drm: panel-orientation-quirks: Update the Lenovo Ideapad D330 quirk (v2) Sasha Levin
2021-11-08 17:42 ` [PATCH AUTOSEL 5.15 003/146] drm: panel-orientation-quirks: Add quirk for KD Kurio Smart C15200 2-in-1 Sasha Levin
2021-11-08 17:42 ` [PATCH AUTOSEL 5.15 004/146] drm: panel-orientation-quirks: Add quirk for the Samsung Galaxy Book 10.6 Sasha Levin
2021-11-08 17:42 ` [PATCH AUTOSEL 5.15 005/146] Bluetooth: sco: Fix lock_sock() blockage by memcpy_from_msg() Sasha Levin
2021-11-08 17:42 ` [PATCH AUTOSEL 5.15 006/146] Bluetooth: fix use-after-free error in lock_sock_nested() Sasha Levin
2021-11-08 17:42 ` [PATCH AUTOSEL 5.15 007/146] Bluetooth: call sock_hold earlier in sco_conn_del Sasha Levin
2021-11-08 17:42 ` [PATCH AUTOSEL 5.15 008/146] drm/panel-orientation-quirks: add Valve Steam Deck Sasha Levin
2021-11-08 17:42 ` [PATCH AUTOSEL 5.15 009/146] rcutorture: Avoid problematic critical section nesting on PREEMPT_RT Sasha Levin
2021-11-08 17:42 ` [PATCH AUTOSEL 5.15 010/146] platform/x86: wmi: do not fail if disabling fails Sasha Levin
2021-11-08 17:42 ` [PATCH AUTOSEL 5.15 011/146] drm/amdgpu: move iommu_resume before ip init/resume Sasha Levin
2021-11-08 17:42 ` [PATCH AUTOSEL 5.15 012/146] MIPS: lantiq: dma: add small delay after reset Sasha Levin
2021-11-08 17:42 ` [PATCH AUTOSEL 5.15 013/146] MIPS: lantiq: dma: reset correct number of channel Sasha Levin
2021-11-08 17:42 ` [PATCH AUTOSEL 5.15 014/146] locking/lockdep: Avoid RCU-induced noinstr fail Sasha Levin
2021-11-08 17:42 ` [PATCH AUTOSEL 5.15 015/146] net: sched: update default qdisc visibility after Tx queue cnt changes Sasha Levin
2021-11-08 17:42 ` [PATCH AUTOSEL 5.15 016/146] ACPI: resources: Add DMI-based legacy IRQ override quirk Sasha Levin
2021-11-08 17:42 ` [PATCH AUTOSEL 5.15 017/146] rcu-tasks: Move RTGS_WAIT_CBS to beginning of rcu_tasks_kthread() loop Sasha Levin
2021-11-08 17:42 ` [PATCH AUTOSEL 5.15 018/146] smackfs: Fix use-after-free in netlbl_catmap_walk() Sasha Levin
2021-11-08 17:42 ` [PATCH AUTOSEL 5.15 019/146] ath11k: Align bss_chan_info structure with firmware Sasha Levin
2021-11-08 17:42 ` [PATCH AUTOSEL 5.15 020/146] crypto: aesni - check walk.nbytes instead of err Sasha Levin
2021-11-08 17:42 ` [PATCH AUTOSEL 5.15 021/146] NET: IPV4: fix error "do not initialise globals to 0" Sasha Levin
2021-11-08 17:42 ` [PATCH AUTOSEL 5.15 022/146] x86/mm/64: Improve stack overflow warnings Sasha Levin
2021-11-08 17:42 ` [PATCH AUTOSEL 5.15 023/146] x86: Increase exception stack sizes Sasha Levin
2021-11-08 17:42 ` [PATCH AUTOSEL 5.15 024/146] mwifiex: Run SET_BSS_MODE when changing from P2P to STATION vif-type Sasha Levin
2021-11-08 17:42 ` [PATCH AUTOSEL 5.15 025/146] mwifiex: Properly initialize private structure on interface type changes Sasha Levin
2021-11-08 17:42 ` [PATCH AUTOSEL 5.15 026/146] spi: Check we have a spi_device_id for each DT compatible Sasha Levin
2021-11-08 17:42 ` [PATCH AUTOSEL 5.15 027/146] fscrypt: allow 256-bit master keys with AES-256-XTS Sasha Levin
2021-11-08 17:42 ` [PATCH AUTOSEL 5.15 028/146] drm/amdgpu: Fix MMIO access page fault Sasha Levin
2021-11-08 17:42 ` [PATCH AUTOSEL 5.15 029/146] drm/amd/display: Fix null pointer dereference for encoders Sasha Levin
2021-11-08 17:42 ` [PATCH AUTOSEL 5.15 030/146] crypto: api - Fix built-in testing dependency failures Sasha Levin
2021-11-08 17:42 ` [PATCH AUTOSEL 5.15 031/146] selftests: net: fib_nexthops: Wait before checking reported idle time Sasha Levin
2021-11-08 17:42 ` [PATCH AUTOSEL 5.15 032/146] leds: trigger: use RCU to protect the led_cdevs list Sasha Levin
2021-11-08 17:43 ` [PATCH AUTOSEL 5.15 033/146] ath11k: Avoid reg rules update during firmware recovery Sasha Levin
2021-11-08 17:43 ` [PATCH AUTOSEL 5.15 034/146] ath11k: add handler for scan event WMI_SCAN_EVENT_DEQUEUED Sasha Levin
2021-11-08 17:43 ` [PATCH AUTOSEL 5.15 035/146] ath11k: Change DMA_FROM_DEVICE to DMA_TO_DEVICE when map reinjected packets Sasha Levin
2021-11-08 17:43 ` [PATCH AUTOSEL 5.15 036/146] ath10k: high latency fixes for beacon buffer Sasha Levin
2021-11-08 17:43 ` Sasha Levin [this message]
2021-11-08 17:43 ` [PATCH AUTOSEL 5.15 038/146] media: mt9p031: Fix corrupted frame after restarting stream Sasha Levin
2021-11-08 17:43 ` [PATCH AUTOSEL 5.15 039/146] media: netup_unidvb: handle interrupt properly according to the firmware Sasha Levin
2021-11-08 17:43 ` [PATCH AUTOSEL 5.15 040/146] media: atomisp: Fix error handling in probe Sasha Levin
2021-11-08 17:43 ` [PATCH AUTOSEL 5.15 041/146] media: stm32: Potential NULL pointer dereference in dcmi_irq_thread() Sasha Levin
2021-11-08 17:43 ` [PATCH AUTOSEL 5.15 042/146] media: uvcvideo: Set capability in s_param Sasha Levin
2021-11-08 17:43 ` [PATCH AUTOSEL 5.15 043/146] media: uvcvideo: Return -EIO for control errors Sasha Levin
2021-11-08 17:43 ` [PATCH AUTOSEL 5.15 044/146] media: uvcvideo: Set unique vdev name based in type Sasha Levin
2021-11-08 17:43 ` [PATCH AUTOSEL 5.15 045/146] media: vidtv: Fix memory leak in remove Sasha Levin
2021-11-08 17:43 ` [PATCH AUTOSEL 5.15 046/146] media: s5p-mfc: fix possible null-pointer dereference in s5p_mfc_probe() Sasha Levin
2021-11-08 17:43 ` [PATCH AUTOSEL 5.15 047/146] media: s5p-mfc: Add checking to s5p_mfc_probe() Sasha Levin
2021-11-08 17:43 ` [PATCH AUTOSEL 5.15 048/146] media: videobuf2: rework vb2_mem_ops API Sasha Levin
2021-11-09 7:54 ` AUTOSEL series truncated was -- Re: [PATCH AUTOSEL 5.15 001/146] dma-buf: WARN on dmabuf release with pending attachments Pavel Machek
2021-11-09 8:07 ` Christian König
2021-11-09 16:05 ` Randy Dunlap
2021-11-14 14:25 ` Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211108174453.1187052-37-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=davem@davemloft.net \
--cc=gakula@marvell.com \
--cc=hkelam@marvell.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=rsaladi2@marvell.com \
--cc=sbhatta@marvell.com \
--cc=sgoutham@marvell.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox