From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: James Smart <jsmart2021@gmail.com>,
Justin Tee <justin.tee@broadcom.com>,
"Martin K . Petersen" <martin.petersen@oracle.com>,
Sasha Levin <sashal@kernel.org>,
james.smart@avagotech.com, dick.kennedy@avagotech.com,
JBottomley@odin.com, linux-scsi@vger.kernel.org
Subject: [PATCH AUTOSEL 5.15 70/82] scsi: lpfc: Allow fabric node recovery if recovery is in progress before devloss
Date: Tue, 9 Nov 2021 17:16:28 -0500 [thread overview]
Message-ID: <20211109221641.1233217-70-sashal@kernel.org> (raw)
In-Reply-To: <20211109221641.1233217-1-sashal@kernel.org>
From: James Smart <jsmart2021@gmail.com>
[ Upstream commit af984c87293b19dccbd0b16afc57c5c9a4a279c7 ]
A link bounce to a slow fabric may observe FDISC response delays lasting
longer than devloss tmo. Current logic decrements the final fabric node
kref during a devloss tmo event. This results in a NULL ptr dereference
crash if the FDISC completes for that fabric node after devloss tmo.
Fix by adding the NLP_IN_RECOV_POST_DEV_LOSS flag, which is set when
devloss tmo triggers and we've noticed that fabric node recovery has
already started or finished in between the time lpfc_dev_loss_tmo_callbk
queues lpfc_dev_loss_tmo_handler. If fabric node recovery succeeds, then
the driver reverses the devloss tmo marked kref put with a kref get. If
fabric node recovery fails, then the final kref put relies on the ELS
timing out or the REG_LOGIN cmpl routine.
Link: https://lore.kernel.org/r/20211020211417.88754-8-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/scsi/lpfc/lpfc_crtn.h | 2 +
drivers/scsi/lpfc/lpfc_disc.h | 12 +++-
drivers/scsi/lpfc/lpfc_els.c | 7 +-
drivers/scsi/lpfc/lpfc_hbadisc.c | 111 ++++++++++++++++++++++++++++++-
drivers/scsi/lpfc/lpfc_init.c | 12 ++--
drivers/scsi/lpfc/lpfc_scsi.c | 10 +--
6 files changed, 139 insertions(+), 15 deletions(-)
diff --git a/drivers/scsi/lpfc/lpfc_crtn.h b/drivers/scsi/lpfc/lpfc_crtn.h
index c512f41991429..c9770b1d2366a 100644
--- a/drivers/scsi/lpfc/lpfc_crtn.h
+++ b/drivers/scsi/lpfc/lpfc_crtn.h
@@ -119,6 +119,8 @@ int lpfc_check_sli_ndlp(struct lpfc_hba *, struct lpfc_sli_ring *,
struct lpfc_nodelist *lpfc_nlp_init(struct lpfc_vport *vport, uint32_t did);
struct lpfc_nodelist *lpfc_nlp_get(struct lpfc_nodelist *);
int lpfc_nlp_put(struct lpfc_nodelist *);
+void lpfc_check_nlp_post_devloss(struct lpfc_vport *vport,
+ struct lpfc_nodelist *ndlp);
void lpfc_ignore_els_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
struct lpfc_iocbq *rspiocb);
int lpfc_nlp_not_used(struct lpfc_nodelist *ndlp);
diff --git a/drivers/scsi/lpfc/lpfc_disc.h b/drivers/scsi/lpfc/lpfc_disc.h
index 871b665bd72e3..37a4b79010bfc 100644
--- a/drivers/scsi/lpfc/lpfc_disc.h
+++ b/drivers/scsi/lpfc/lpfc_disc.h
@@ -85,6 +85,13 @@ enum lpfc_fc4_xpt_flags {
NLP_XPT_HAS_HH = 0x10
};
+enum lpfc_nlp_save_flags {
+ /* devloss occurred during recovery */
+ NLP_IN_RECOV_POST_DEV_LOSS = 0x1,
+ /* wait for outstanding LOGO to cmpl */
+ NLP_WAIT_FOR_LOGO = 0x2,
+};
+
struct lpfc_nodelist {
struct list_head nlp_listp;
struct serv_parm fc_sparam; /* buffer for service params */
@@ -144,8 +151,9 @@ struct lpfc_nodelist {
unsigned long *active_rrqs_xri_bitmap;
struct lpfc_scsicmd_bkt *lat_data; /* Latency data */
uint32_t fc4_prli_sent;
- u32 upcall_flags;
-#define NLP_WAIT_FOR_LOGO 0x2
+
+ /* flags to keep ndlp alive until special conditions are met */
+ enum lpfc_nlp_save_flags save_flags;
enum lpfc_fc4_xpt_flags fc4_xpt_flags;
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index 052c0e5b11195..537482c2d7dab 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -2899,9 +2899,9 @@ lpfc_cmpl_els_logo(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
irsp = &(rspiocb->iocb);
spin_lock_irq(&ndlp->lock);
ndlp->nlp_flag &= ~NLP_LOGO_SND;
- if (ndlp->upcall_flags & NLP_WAIT_FOR_LOGO) {
+ if (ndlp->save_flags & NLP_WAIT_FOR_LOGO) {
wake_up_waiter = 1;
- ndlp->upcall_flags &= ~NLP_WAIT_FOR_LOGO;
+ ndlp->save_flags &= ~NLP_WAIT_FOR_LOGO;
}
spin_unlock_irq(&ndlp->lock);
@@ -10713,6 +10713,9 @@ lpfc_cmpl_els_fdisc(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
irsp->ulpStatus, irsp->un.ulpWord[4]);
goto fdisc_failed;
}
+
+ lpfc_check_nlp_post_devloss(vport, ndlp);
+
spin_lock_irq(shost->host_lock);
vport->fc_flag &= ~FC_VPORT_CVL_RCVD;
vport->fc_flag &= ~FC_VPORT_LOGO_RCVD;
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index 787898d25670d..5880fcda9f312 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -209,7 +209,12 @@ lpfc_dev_loss_tmo_callbk(struct fc_rport *rport)
spin_lock_irqsave(&ndlp->lock, iflags);
ndlp->nlp_flag |= NLP_IN_DEV_LOSS;
- ndlp->nlp_flag &= ~NLP_NPR_2B_DISC;
+
+ /* If there is a PLOGI in progress, and we are in a
+ * NLP_NPR_2B_DISC state, don't turn off the flag.
+ */
+ if (ndlp->nlp_state != NLP_STE_PLOGI_ISSUE)
+ ndlp->nlp_flag &= ~NLP_NPR_2B_DISC;
/*
* The backend does not expect any more calls associated with this
@@ -340,6 +345,37 @@ static void lpfc_check_inactive_vmid(struct lpfc_hba *phba)
lpfc_destroy_vport_work_array(phba, vports);
}
+/**
+ * lpfc_check_nlp_post_devloss - Check to restore ndlp refcnt after devloss
+ * @vport: Pointer to vport object.
+ * @ndlp: Pointer to remote node object.
+ *
+ * If NLP_IN_RECOV_POST_DEV_LOSS flag was set due to outstanding recovery of
+ * node during dev_loss_tmo processing, then this function restores the nlp_put
+ * kref decrement from lpfc_dev_loss_tmo_handler.
+ **/
+void
+lpfc_check_nlp_post_devloss(struct lpfc_vport *vport,
+ struct lpfc_nodelist *ndlp)
+{
+ unsigned long iflags;
+
+ spin_lock_irqsave(&ndlp->lock, iflags);
+ if (ndlp->save_flags & NLP_IN_RECOV_POST_DEV_LOSS) {
+ ndlp->save_flags &= ~NLP_IN_RECOV_POST_DEV_LOSS;
+ spin_unlock_irqrestore(&ndlp->lock, iflags);
+ lpfc_nlp_get(ndlp);
+ lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY | LOG_NODE,
+ "8438 Devloss timeout reversed on DID x%x "
+ "refcnt %d ndlp %p flag x%x "
+ "port_state = x%x\n",
+ ndlp->nlp_DID, kref_read(&ndlp->kref), ndlp,
+ ndlp->nlp_flag, vport->port_state);
+ spin_lock_irqsave(&ndlp->lock, iflags);
+ }
+ spin_unlock_irqrestore(&ndlp->lock, iflags);
+}
+
/**
* lpfc_dev_loss_tmo_handler - Remote node devloss timeout handler
* @ndlp: Pointer to remote node object.
@@ -358,6 +394,8 @@ lpfc_dev_loss_tmo_handler(struct lpfc_nodelist *ndlp)
uint8_t *name;
int warn_on = 0;
int fcf_inuse = 0;
+ bool recovering = false;
+ struct fc_vport *fc_vport = NULL;
unsigned long iflags;
vport = ndlp->vport;
@@ -394,6 +432,64 @@ lpfc_dev_loss_tmo_handler(struct lpfc_nodelist *ndlp)
/* Fabric nodes are done. */
if (ndlp->nlp_type & NLP_FABRIC) {
+ spin_lock_irqsave(&ndlp->lock, iflags);
+ /* In massive vport configuration settings, it's possible
+ * dev_loss_tmo fired during node recovery. So, check if
+ * fabric nodes are in discovery states outstanding.
+ */
+ switch (ndlp->nlp_DID) {
+ case Fabric_DID:
+ fc_vport = vport->fc_vport;
+ if (fc_vport &&
+ fc_vport->vport_state == FC_VPORT_INITIALIZING)
+ recovering = true;
+ break;
+ case Fabric_Cntl_DID:
+ if (ndlp->nlp_flag & NLP_REG_LOGIN_SEND)
+ recovering = true;
+ break;
+ case FDMI_DID:
+ fallthrough;
+ case NameServer_DID:
+ if (ndlp->nlp_state >= NLP_STE_PLOGI_ISSUE &&
+ ndlp->nlp_state <= NLP_STE_REG_LOGIN_ISSUE)
+ recovering = true;
+ break;
+ }
+ spin_unlock_irqrestore(&ndlp->lock, iflags);
+
+ /* Mark an NLP_IN_RECOV_POST_DEV_LOSS flag to know if reversing
+ * the following lpfc_nlp_put is necessary after fabric node is
+ * recovered.
+ */
+ if (recovering) {
+ lpfc_printf_vlog(vport, KERN_INFO,
+ LOG_DISCOVERY | LOG_NODE,
+ "8436 Devloss timeout marked on "
+ "DID x%x refcnt %d ndlp %p "
+ "flag x%x port_state = x%x\n",
+ ndlp->nlp_DID, kref_read(&ndlp->kref),
+ ndlp, ndlp->nlp_flag,
+ vport->port_state);
+ spin_lock_irqsave(&ndlp->lock, iflags);
+ ndlp->save_flags |= NLP_IN_RECOV_POST_DEV_LOSS;
+ spin_unlock_irqrestore(&ndlp->lock, iflags);
+ } else if (ndlp->nlp_state == NLP_STE_UNMAPPED_NODE) {
+ /* Fabric node fully recovered before this dev_loss_tmo
+ * queue work is processed. Thus, ignore the
+ * dev_loss_tmo event.
+ */
+ lpfc_printf_vlog(vport, KERN_INFO,
+ LOG_DISCOVERY | LOG_NODE,
+ "8437 Devloss timeout ignored on "
+ "DID x%x refcnt %d ndlp %p "
+ "flag x%x port_state = x%x\n",
+ ndlp->nlp_DID, kref_read(&ndlp->kref),
+ ndlp, ndlp->nlp_flag,
+ vport->port_state);
+ return fcf_inuse;
+ }
+
lpfc_nlp_put(ndlp);
return fcf_inuse;
}
@@ -423,6 +519,14 @@ lpfc_dev_loss_tmo_handler(struct lpfc_nodelist *ndlp)
ndlp->nlp_state, ndlp->nlp_rpi);
}
+ /* If we are devloss, but we are in the process of rediscovering the
+ * ndlp, don't issue a NLP_EVT_DEVICE_RM event.
+ */
+ if (ndlp->nlp_state >= NLP_STE_PLOGI_ISSUE &&
+ ndlp->nlp_state <= NLP_STE_PRLI_ISSUE) {
+ return fcf_inuse;
+ }
+
if (!(ndlp->fc4_xpt_flags & NVME_XPT_REGD))
lpfc_disc_state_machine(vport, ndlp, NULL, NLP_EVT_DEVICE_RM);
@@ -4351,6 +4455,8 @@ lpfc_mbx_cmpl_fc_reg_login(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
goto out;
}
+ lpfc_check_nlp_post_devloss(vport, ndlp);
+
if (phba->sli_rev < LPFC_SLI_REV4)
ndlp->nlp_rpi = mb->un.varWords[0];
@@ -4526,9 +4632,10 @@ lpfc_nlp_counters(struct lpfc_vport *vport, int state, int count)
void
lpfc_nlp_reg_node(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
{
-
unsigned long iflags;
+ lpfc_check_nlp_post_devloss(vport, ndlp);
+
spin_lock_irqsave(&ndlp->lock, iflags);
if (ndlp->fc4_xpt_flags & NLP_XPT_REGD) {
/* Already registered with backend, trigger rescan */
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 195169badb372..0fee8d590b0c4 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -3694,12 +3694,16 @@ lpfc_offline_prep(struct lpfc_hba *phba, int mbx_action)
lpfc_disc_state_machine(vports[i], ndlp,
NULL, NLP_EVT_DEVICE_RECOVERY);
- /* Don't remove the node unless the
+ /* Don't remove the node unless the node
* has been unregistered with the
- * transport. If so, let dev_loss
- * take care of the node.
+ * transport, and we're not in recovery
+ * before dev_loss_tmo triggered.
+ * Otherwise, let dev_loss take care of
+ * the node.
*/
- if (!(ndlp->fc4_xpt_flags &
+ if (!(ndlp->save_flags &
+ NLP_IN_RECOV_POST_DEV_LOSS) &&
+ !(ndlp->fc4_xpt_flags &
(NVME_XPT_REGD | SCSI_XPT_REGD)))
lpfc_disc_state_machine
(vports[i], ndlp,
diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index befdf864c43bd..1bfd8b677f8ef 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -6455,28 +6455,28 @@ lpfc_target_reset_handler(struct scsi_cmnd *cmnd)
/* Issue LOGO, if no LOGO is outstanding */
spin_lock_irqsave(&pnode->lock, flags);
- if (!(pnode->upcall_flags & NLP_WAIT_FOR_LOGO) &&
+ if (!(pnode->save_flags & NLP_WAIT_FOR_LOGO) &&
!pnode->logo_waitq) {
pnode->logo_waitq = &waitq;
pnode->nlp_fcp_info &= ~NLP_FCP_2_DEVICE;
pnode->nlp_flag |= NLP_ISSUE_LOGO;
- pnode->upcall_flags |= NLP_WAIT_FOR_LOGO;
+ pnode->save_flags |= NLP_WAIT_FOR_LOGO;
spin_unlock_irqrestore(&pnode->lock, flags);
lpfc_unreg_rpi(vport, pnode);
wait_event_timeout(waitq,
- (!(pnode->upcall_flags &
+ (!(pnode->save_flags &
NLP_WAIT_FOR_LOGO)),
msecs_to_jiffies(dev_loss_tmo *
1000));
- if (pnode->upcall_flags & NLP_WAIT_FOR_LOGO) {
+ if (pnode->save_flags & NLP_WAIT_FOR_LOGO) {
lpfc_printf_vlog(vport, KERN_ERR, logit,
"0725 SCSI layer TGTRST "
"failed & LOGO TMO (%d, %llu) "
"return x%x\n",
tgt_id, lun_id, status);
spin_lock_irqsave(&pnode->lock, flags);
- pnode->upcall_flags &= ~NLP_WAIT_FOR_LOGO;
+ pnode->save_flags &= ~NLP_WAIT_FOR_LOGO;
} else {
spin_lock_irqsave(&pnode->lock, flags);
}
--
2.33.0
next prev parent reply other threads:[~2021-11-09 22:22 UTC|newest]
Thread overview: 88+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-09 22:15 [PATCH AUTOSEL 5.15 01/82] arm64: zynqmp: Do not duplicate flash partition label property Sasha Levin
2021-11-09 22:15 ` [PATCH AUTOSEL 5.15 02/82] arm64: zynqmp: Fix serial compatible string Sasha Levin
2021-11-09 22:15 ` [PATCH AUTOSEL 5.15 03/82] clk: sunxi-ng: Unregister clocks/resets when unbinding Sasha Levin
2021-11-09 22:15 ` [PATCH AUTOSEL 5.15 04/82] ARM: dts: sunxi: Fix OPPs node name Sasha Levin
2021-11-09 22:15 ` [PATCH AUTOSEL 5.15 05/82] arm64: dts: allwinner: h5: Fix GPU thermal zone " Sasha Levin
2021-11-09 22:15 ` [PATCH AUTOSEL 5.15 06/82] arm64: dts: allwinner: a100: Fix " Sasha Levin
2021-11-09 22:15 ` [PATCH AUTOSEL 5.15 07/82] staging: wfx: ensure IRQ is ready before enabling it Sasha Levin
2021-11-09 22:15 ` [PATCH AUTOSEL 5.15 08/82] ARM: dts: BCM5301X: Fix nodes names Sasha Levin
2021-11-09 22:15 ` [PATCH AUTOSEL 5.15 09/82] ARM: dts: BCM5301X: Fix MDIO mux binding Sasha Levin
2021-11-09 22:15 ` [PATCH AUTOSEL 5.15 10/82] ARM: dts: NSP: Fix mpcore, mmc node names Sasha Levin
2021-11-09 22:15 ` [PATCH AUTOSEL 5.15 11/82] arm64: dts: broadcom: bcm4908: Move reboot syscon out of bus Sasha Levin
2021-11-09 22:15 ` [PATCH AUTOSEL 5.15 12/82] scsi: pm80xx: Fix memory leak during rmmod Sasha Levin
2021-11-09 22:15 ` [PATCH AUTOSEL 5.15 13/82] scsi: lpfc: Fix list_add() corruption in lpfc_drain_txq() Sasha Levin
2021-11-09 22:15 ` [PATCH AUTOSEL 5.15 14/82] ASoC: mediatek: mt8195: Add missing of_node_put() Sasha Levin
2021-11-09 22:15 ` [PATCH AUTOSEL 5.15 15/82] arm64: dts: rockchip: Disable CDN DP on Pinebook Pro Sasha Levin
2021-11-09 22:15 ` [PATCH AUTOSEL 5.15 16/82] arm64: dts: hisilicon: fix arm,sp805 compatible string Sasha Levin
2021-11-09 22:15 ` [PATCH AUTOSEL 5.15 17/82] arm64: dts: rockchip: add Coresight debug range for RK3399 Sasha Levin
2021-11-09 23:25 ` Brian Norris
2021-11-10 0:44 ` Sasha Levin
2021-11-10 0:49 ` Brian Norris
2021-11-09 22:15 ` [PATCH AUTOSEL 5.15 18/82] RDMA/bnxt_re: Check if the vlan is valid before reporting Sasha Levin
2021-11-09 22:15 ` [PATCH AUTOSEL 5.15 19/82] bus: ti-sysc: Add quirk handling for reinit on context lost Sasha Levin
2021-11-09 22:15 ` [PATCH AUTOSEL 5.15 20/82] bus: ti-sysc: Use context lost quirk for otg Sasha Levin
2021-11-09 22:15 ` [PATCH AUTOSEL 5.15 21/82] usb: musb: tusb6010: check return value after calling platform_get_resource() Sasha Levin
2021-11-09 22:15 ` [PATCH AUTOSEL 5.15 22/82] usb: typec: tipd: Remove WARN_ON in tps6598x_block_read Sasha Levin
2021-11-09 22:15 ` [PATCH AUTOSEL 5.15 23/82] ARM: dts: ux500: Skomer regulator fixes Sasha Levin
2021-11-09 22:15 ` [PATCH AUTOSEL 5.15 24/82] staging: rtl8723bs: remove possible deadlock when disconnect (v2) Sasha Levin
2021-11-09 22:15 ` [PATCH AUTOSEL 5.15 25/82] staging: rtl8723bs: remove a second possible deadlock Sasha Levin
2021-11-09 22:15 ` [PATCH AUTOSEL 5.15 26/82] staging: rtl8723bs: remove a third " Sasha Levin
2021-11-09 22:15 ` [PATCH AUTOSEL 5.15 27/82] ARM: BCM53016: Specify switch ports for Meraki MR32 Sasha Levin
2021-11-09 22:15 ` [PATCH AUTOSEL 5.15 28/82] arm64: dts: qcom: msm8998: Fix CPU/L2 idle state latency and residency Sasha Levin
2021-11-09 22:15 ` [PATCH AUTOSEL 5.15 29/82] arm64: dts: qcom: ipq6018: Fix qcom,controlled-remotely property Sasha Levin
2021-11-09 22:15 ` [PATCH AUTOSEL 5.15 30/82] arm64: dts: qcom: ipq8074: " Sasha Levin
2021-11-09 22:15 ` [PATCH AUTOSEL 5.15 31/82] arm64: dts: qcom: sdm845: " Sasha Levin
2021-11-09 22:15 ` [PATCH AUTOSEL 5.15 32/82] arm64: dts: qcom: msm8916: Add unit name for /soc node Sasha Levin
2021-11-09 22:15 ` [PATCH AUTOSEL 5.15 33/82] arm64: dts: freescale: fix arm,sp805 compatible string Sasha Levin
2021-11-09 22:15 ` [PATCH AUTOSEL 5.15 34/82] arm64: dts: ls1012a: Add serial alias for ls1012a-rdb Sasha Levin
2021-11-09 22:15 ` [PATCH AUTOSEL 5.15 35/82] RDMA/rxe: Separate HW and SW l/rkeys Sasha Levin
2021-11-09 22:15 ` [PATCH AUTOSEL 5.15 36/82] ASoC: SOF: Intel: hda-dai: fix potential locking issue Sasha Levin
2021-11-09 22:15 ` [PATCH AUTOSEL 5.15 37/82] scsi: core: Fix scsi_mode_sense() buffer length handling Sasha Levin
2021-11-09 22:15 ` [PATCH AUTOSEL 5.15 38/82] ALSA: usb-audio: disable implicit feedback sync for Behringer UFX1204 and UFX1604 Sasha Levin
2021-11-09 22:15 ` [PATCH AUTOSEL 5.15 39/82] clk: imx: imx6ul: Move csi_sel mux to correct base register Sasha Levin
2021-11-09 22:15 ` [PATCH AUTOSEL 5.15 40/82] ASoC: es8316: Use IRQF_NO_AUTOEN when requesting the IRQ Sasha Levin
2021-11-09 22:15 ` [PATCH AUTOSEL 5.15 41/82] ASoC: rt5651: " Sasha Levin
2021-11-09 22:16 ` [PATCH AUTOSEL 5.15 42/82] ASoC: nau8824: Add DMI quirk mechanism for active-high jack-detect Sasha Levin
2021-11-09 22:16 ` [PATCH AUTOSEL 5.15 43/82] scsi: advansys: Fix kernel pointer leak Sasha Levin
2021-11-09 22:16 ` [PATCH AUTOSEL 5.15 44/82] scsi: smartpqi: Add controller handshake during kdump Sasha Levin
2021-11-09 22:16 ` [PATCH AUTOSEL 5.15 45/82] arm64: dts: imx8mm-kontron: Fix reset delays for ethernet PHY Sasha Levin
2021-11-09 22:16 ` [PATCH AUTOSEL 5.15 46/82] ALSA: intel-dsp-config: add quirk for APL/GLK/TGL devices based on ES8336 codec Sasha Levin
2021-11-09 22:16 ` [PATCH AUTOSEL 5.15 47/82] ASoC: Intel: soc-acpi: add missing quirk for TGL SDCA single amp Sasha Levin
2021-11-09 22:16 ` [PATCH AUTOSEL 5.15 48/82] ASoC: Intel: sof_sdw: add missing quirk for Dell SKU 0A45 Sasha Levin
2021-11-09 22:16 ` [PATCH AUTOSEL 5.15 49/82] firmware_loader: fix pre-allocated buf built-in firmware use Sasha Levin
2021-11-09 22:16 ` [PATCH AUTOSEL 5.15 50/82] cpuidle: tegra: Check whether PMC is ready Sasha Levin
2021-11-09 22:16 ` [PATCH AUTOSEL 5.15 51/82] HID: multitouch: disable sticky fingers for UPERFECT Y Sasha Levin
2021-11-09 22:16 ` [PATCH AUTOSEL 5.15 52/82] ALSA: usb-audio: Add support for the Pioneer DJM 750MK2 Mixer/Soundcard Sasha Levin
2021-11-09 22:16 ` [PATCH AUTOSEL 5.15 53/82] ARM: dts: omap: fix gpmc,mux-add-data type Sasha Levin
2021-11-09 22:16 ` [PATCH AUTOSEL 5.15 54/82] usb: host: ohci-tmio: check return value after calling platform_get_resource() Sasha Levin
2021-11-09 22:16 ` [PATCH AUTOSEL 5.15 55/82] ASoC: rt5682: fix a little pop while playback Sasha Levin
2021-11-09 22:16 ` [PATCH AUTOSEL 5.15 56/82] ARM: dts: ls1021a: move thermal-zones node out of soc/ Sasha Levin
2021-11-09 22:16 ` [PATCH AUTOSEL 5.15 57/82] ARM: dts: ls1021a-tsn: use generic "jedec,spi-nor" compatible for flash Sasha Levin
2021-11-09 22:16 ` [PATCH AUTOSEL 5.15 58/82] ALSA: ISA: not for M68K Sasha Levin
2021-11-09 22:16 ` [PATCH AUTOSEL 5.15 59/82] iommu/vt-d: Do not falsely log intel_iommu is unsupported kernel option Sasha Levin
2021-11-09 22:16 ` [PATCH AUTOSEL 5.15 60/82] tty: tty_buffer: Fix the softlockup issue in flush_to_ldisc Sasha Levin
2021-11-09 22:16 ` [PATCH AUTOSEL 5.15 61/82] MIPS: sni: Fix the build Sasha Levin
2021-11-09 22:16 ` [PATCH AUTOSEL 5.15 62/82] scsi: scsi_debug: Fix out-of-bound read in resp_readcap16() Sasha Levin
2021-11-09 22:16 ` [PATCH AUTOSEL 5.15 63/82] scsi: scsi_debug: Fix out-of-bound read in resp_report_tgtpgs() Sasha Levin
2021-11-09 22:16 ` [PATCH AUTOSEL 5.15 64/82] scsi: target: Fix ordered tag handling Sasha Levin
2021-11-09 22:16 ` [PATCH AUTOSEL 5.15 65/82] scsi: target: Fix alua_tg_pt_gps_count tracking Sasha Levin
2021-11-09 22:16 ` [PATCH AUTOSEL 5.15 66/82] iio: imu: st_lsm6dsx: Avoid potential array overflow in st_lsm6dsx_set_odr() Sasha Levin
2021-11-12 17:33 ` Jonathan Cameron
2021-11-09 22:16 ` [PATCH AUTOSEL 5.15 67/82] RDMA/core: Use kvzalloc when allocating the struct ib_port Sasha Levin
2021-11-09 22:16 ` [PATCH AUTOSEL 5.15 68/82] scsi: lpfc: Fix use-after-free in lpfc_unreg_rpi() routine Sasha Levin
2021-11-09 22:16 ` [PATCH AUTOSEL 5.15 69/82] scsi: lpfc: Fix link down processing to address NULL pointer dereference Sasha Levin
2021-11-09 22:16 ` Sasha Levin [this message]
2021-11-09 22:16 ` [PATCH AUTOSEL 5.15 71/82] memory: tegra20-emc: Add runtime dependency on devfreq governor module Sasha Levin
2021-11-09 22:16 ` [PATCH AUTOSEL 5.15 72/82] powerpc/5200: dts: fix memory node unit name Sasha Levin
2021-11-09 22:16 ` [PATCH AUTOSEL 5.15 73/82] arm64: dts: qcom: msm8916: Add CPU ACC and SAW/SPM Sasha Levin
2021-11-10 8:40 ` Stephan Gerhold
2021-11-12 13:43 ` Sasha Levin
2021-11-09 22:16 ` [PATCH AUTOSEL 5.15 74/82] ARM: dts: qcom: fix memory and mdio nodes naming for RB3011 Sasha Levin
2021-11-09 22:16 ` [PATCH AUTOSEL 5.15 75/82] arm64: dts: qcom: Fix node name of rpm-msg-ram device nodes Sasha Levin
2021-11-09 22:16 ` [PATCH AUTOSEL 5.15 76/82] ALSA: gus: fix null pointer dereference on pointer block Sasha Levin
2021-11-09 22:16 ` [PATCH AUTOSEL 5.15 77/82] ALSA: usb-audio: fix null pointer dereference on pointer cs_desc Sasha Levin
2021-11-09 22:16 ` [PATCH AUTOSEL 5.15 78/82] clk: at91: sama7g5: remove prescaler part of master clock Sasha Levin
2021-11-09 22:16 ` [PATCH AUTOSEL 5.15 79/82] iommu/dart: Initialize DART_STREAMS_ENABLE Sasha Levin
2021-11-09 22:16 ` [PATCH AUTOSEL 5.15 80/82] powerpc/dcr: Use cmplwi instead of 3-argument cmpli Sasha Levin
2021-11-09 22:16 ` [PATCH AUTOSEL 5.15 81/82] powerpc/8xx: Fix Oops with STRICT_KERNEL_RWX without DEBUG_RODATA_TEST Sasha Levin
2021-11-09 22:16 ` [PATCH AUTOSEL 5.15 82/82] HID: playstation: require multicolor LED functionality Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211109221641.1233217-70-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=JBottomley@odin.com \
--cc=dick.kennedy@avagotech.com \
--cc=james.smart@avagotech.com \
--cc=jsmart2021@gmail.com \
--cc=justin.tee@broadcom.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox