From: "Marek Behún" <kabel@kernel.org>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Sasha Levin <sashal@kernel.org>
Cc: pali@kernel.org, stable@vger.kernel.org,
"Marek Behún" <kabel@kernel.org>
Subject: [PATCH 4.14 00/24] Armada 3720 PCIe fixes for 4.14
Date: Wed, 24 Nov 2021 23:49:09 +0100 [thread overview]
Message-ID: <20211124224933.24275-1-kabel@kernel.org> (raw)
Hello Greg, Sasha,
this series for 4.14-stable backports all the fixes (and their
dependencies) for Armada 3720 PCIe driver.
These include:
- fixes (and their dependencies) for pci-aardvark controller
- fixes (and their dependencies) for pinctrl-armada-37xx driver
- device-tree fixes
Basically all fixes from upstream are taken, excluding those
that need fix the emulated bridge, since that was introduced
after 4.19. (Should we backport it? It concerns only mvebu and
aardvark controllers...)
Marek
Evan Wang (1):
PCI: aardvark: Remove PCIe outbound window configuration
Frederick Lawler (1):
PCI: Add PCI_EXP_LNKCTL2_TLS* macros
Gregory CLEMENT (1):
pinctrl: armada-37xx: add missing pin: PCIe1 Wakeup
Marek Behún (4):
PCI: aardvark: Improve link training
pinctrl: armada-37xx: Correct mpp definitions
pinctrl: armada-37xx: Correct PWM pins definitions
arm64: dts: marvell: armada-37xx: Set pcie_reset_pin to gpio function
Miquel Raynal (1):
arm64: dts: marvell: armada-37xx: declare PCIe reset pin
Pali Rohár (12):
PCI: aardvark: Train link immediately after enabling training
PCI: aardvark: Issue PERST via GPIO
PCI: aardvark: Replace custom macros by standard linux/pci_regs.h
macros
PCI: aardvark: Indicate error in 'val' when config read fails
PCI: aardvark: Don't touch PCIe registers if no card connected
PCI: aardvark: Fix compilation on s390
PCI: aardvark: Move PCIe reset card code to advk_pcie_train_link()
PCI: aardvark: Update comment about disabling link training
PCI: aardvark: Configure PCIe resources from 'ranges' DT property
PCI: aardvark: Fix PCIe Max Payload Size setting
PCI: aardvark: Fix link training
PCI: aardvark: Fix checking for link up via LTSSM state
Remi Pommarel (1):
PCI: aardvark: Wait for endpoint to be ready before training link
Sergei Shtylyov (1):
PCI: aardvark: Fix I/O space page leak
Thomas Petazzoni (1):
PCI: aardvark: Introduce an advk_pcie_valid_device() helper
Wen Yang (1):
PCI: aardvark: Fix a leaked reference by adding missing of_node_put()
.../pinctrl/marvell,armada-37xx-pinctrl.txt | 26 +-
.../arm64/boot/dts/marvell/armada-3720-db.dts | 3 +
.../dts/marvell/armada-3720-espressobin.dts | 3 +
arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 9 +
drivers/pci/host/pci-aardvark.c | 463 ++++++++++++++----
drivers/pinctrl/mvebu/pinctrl-armada-37xx.c | 28 +-
include/uapi/linux/pci_regs.h | 5 +
7 files changed, 430 insertions(+), 107 deletions(-)
--
2.32.0
next reply other threads:[~2021-11-24 22:49 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-24 22:49 Marek Behún [this message]
2021-11-24 22:49 ` [PATCH 4.14 01/24] PCI: aardvark: Fix I/O space page leak Marek Behún
2021-11-24 22:49 ` [PATCH 4.14 02/24] PCI: aardvark: Fix a leaked reference by adding missing of_node_put() Marek Behún
2021-11-24 22:49 ` [PATCH 4.14 03/24] PCI: aardvark: Wait for endpoint to be ready before training link Marek Behún
2021-11-24 22:49 ` [PATCH 4.14 04/24] PCI: aardvark: Train link immediately after enabling training Marek Behún
2021-11-24 22:49 ` [PATCH 4.14 05/24] PCI: aardvark: Improve link training Marek Behún
2021-11-24 22:49 ` [PATCH 4.14 06/24] PCI: aardvark: Issue PERST via GPIO Marek Behún
2021-11-24 22:49 ` [PATCH 4.14 07/24] PCI: aardvark: Replace custom macros by standard linux/pci_regs.h macros Marek Behún
2021-11-24 22:49 ` [PATCH 4.14 08/24] PCI: aardvark: Indicate error in 'val' when config read fails Marek Behún
2021-11-24 22:49 ` [PATCH 4.14 09/24] PCI: aardvark: Introduce an advk_pcie_valid_device() helper Marek Behún
2021-11-24 22:49 ` [PATCH 4.14 10/24] PCI: aardvark: Don't touch PCIe registers if no card connected Marek Behún
2021-11-24 22:49 ` [PATCH 4.14 11/24] PCI: aardvark: Fix compilation on s390 Marek Behún
2021-11-24 22:49 ` [PATCH 4.14 12/24] PCI: aardvark: Move PCIe reset card code to advk_pcie_train_link() Marek Behún
2021-11-24 22:49 ` [PATCH 4.14 13/24] PCI: aardvark: Update comment about disabling link training Marek Behún
2021-11-24 22:49 ` [PATCH 4.14 14/24] PCI: aardvark: Remove PCIe outbound window configuration Marek Behún
2021-11-24 22:49 ` [PATCH 4.14 15/24] PCI: aardvark: Configure PCIe resources from 'ranges' DT property Marek Behún
2021-11-24 22:49 ` [PATCH 4.14 16/24] PCI: aardvark: Fix PCIe Max Payload Size setting Marek Behún
2021-11-24 22:49 ` [PATCH 4.14 17/24] PCI: Add PCI_EXP_LNKCTL2_TLS* macros Marek Behún
2021-11-24 22:49 ` [PATCH 4.14 18/24] PCI: aardvark: Fix link training Marek Behún
2021-11-24 22:49 ` [PATCH 4.14 19/24] PCI: aardvark: Fix checking for link up via LTSSM state Marek Behún
2021-11-24 22:49 ` [PATCH 4.14 20/24] pinctrl: armada-37xx: Correct mpp definitions Marek Behún
2021-11-24 22:49 ` [PATCH 4.14 21/24] pinctrl: armada-37xx: add missing pin: PCIe1 Wakeup Marek Behún
2021-11-24 22:49 ` [PATCH 4.14 22/24] pinctrl: armada-37xx: Correct PWM pins definitions Marek Behún
2021-11-24 22:49 ` [PATCH 4.14 23/24] arm64: dts: marvell: armada-37xx: declare PCIe reset pin Marek Behún
2021-11-24 22:49 ` [PATCH 4.14 24/24] arm64: dts: marvell: armada-37xx: Set pcie_reset_pin to gpio function Marek Behún
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211124224933.24275-1-kabel@kernel.org \
--to=kabel@kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=pali@kernel.org \
--cc=sashal@kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox