public inbox for stable@vger.kernel.org
 help / color / mirror / Atom feed
From: "Marek Behún" <kabel@kernel.org>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Sasha Levin <sashal@kernel.org>
Cc: pali@kernel.org, stable@vger.kernel.org,
	"Marek Behún" <kabel@kernel.org>
Subject: [PATCH 5.4 00/22] Armada 3720 PCIe fixes for 5.4
Date: Thu, 25 Nov 2021 01:25:54 +0100	[thread overview]
Message-ID: <20211125002616.31363-1-kabel@kernel.org> (raw)

Hello Greg, Sasha,

this series for 5.4-stable backports all the fixes (and their
dependencies) for Armada 3720 PCIe driver.
These include:
- fixes (and their dependencies) for pci-aardvark controller
- fixes for pci-bridge-emul
- fixes (and their dependencies) for pinctrl-armada-37xx driver
- device-tree fixes

Marek

Grzegorz Jaszczyk (1):
  PCI: aardvark: Fix big endian support

Marek Behún (4):
  PCI: aardvark: Improve link training
  PCI: aardvark: Deduplicate code in advk_pcie_rd_conf()
  pinctrl: armada-37xx: Correct PWM pins definitions
  arm64: dts: marvell: armada-37xx: Set pcie_reset_pin to gpio function

Pali Rohár (15):
  PCI: aardvark: Train link immediately after enabling training
  PCI: aardvark: Issue PERST via GPIO
  PCI: aardvark: Replace custom macros by standard linux/pci_regs.h
    macros
  PCI: aardvark: Don't touch PCIe registers if no card connected
  PCI: aardvark: Fix compilation on s390
  PCI: aardvark: Move PCIe reset card code to advk_pcie_train_link()
  PCI: aardvark: Update comment about disabling link training
  PCI: aardvark: Configure PCIe resources from 'ranges' DT property
  PCI: aardvark: Fix PCIe Max Payload Size setting
  PCI: aardvark: Implement re-issuing config requests on CRS response
  PCI: aardvark: Simplify initialization of rootcap on virtual bridge
  PCI: aardvark: Fix link training
  PCI: aardvark: Fix support for bus mastering and PCI_COMMAND on
    emulated bridge
  PCI: aardvark: Set PCI Bridge Class Code to PCI Bridge
  PCI: aardvark: Fix support for PCI_BRIDGE_CTL_BUS_RESET on emulated
    bridge

Remi Pommarel (1):
  PCI: aardvark: Wait for endpoint to be ready before training link

Russell King (1):
  PCI: pci-bridge-emul: Fix array overruns, improve safety

 .../pinctrl/marvell,armada-37xx-pinctrl.txt   |   8 +-
 .../arm64/boot/dts/marvell/armada-3720-db.dts |   3 +
 .../dts/marvell/armada-3720-espressobin.dts   |   1 +
 .../dts/marvell/armada-3720-turris-mox.dts    |   4 -
 arch/arm64/boot/dts/marvell/armada-37xx.dtsi  |   2 +-
 drivers/pci/controller/pci-aardvark.c         | 576 ++++++++++++++----
 drivers/pci/pci-bridge-emul.c                 |  11 +-
 drivers/pinctrl/mvebu/pinctrl-armada-37xx.c   |  17 +-
 8 files changed, 489 insertions(+), 133 deletions(-)

-- 
2.32.0


             reply	other threads:[~2021-11-25  0:28 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-11-25  0:25 Marek Behún [this message]
2021-11-25  0:25 ` [PATCH 5.4 01/22] PCI: aardvark: Wait for endpoint to be ready before training link Marek Behún
2021-11-25  0:25 ` [PATCH 5.4 02/22] PCI: aardvark: Fix big endian support Marek Behún
2021-11-25  0:25 ` [PATCH 5.4 03/22] PCI: aardvark: Train link immediately after enabling training Marek Behún
2021-11-25  0:25 ` [PATCH 5.4 04/22] PCI: aardvark: Improve link training Marek Behún
2021-11-25  0:25 ` [PATCH 5.4 05/22] PCI: aardvark: Issue PERST via GPIO Marek Behún
2021-11-25  0:26 ` [PATCH 5.4 06/22] PCI: aardvark: Replace custom macros by standard linux/pci_regs.h macros Marek Behún
2021-11-25  0:26 ` [PATCH 5.4 07/22] PCI: aardvark: Don't touch PCIe registers if no card connected Marek Behún
2021-11-25  0:26 ` [PATCH 5.4 08/22] PCI: aardvark: Fix compilation on s390 Marek Behún
2021-11-25  0:26 ` [PATCH 5.4 09/22] PCI: aardvark: Move PCIe reset card code to advk_pcie_train_link() Marek Behún
2021-11-25  0:26 ` [PATCH 5.4 10/22] PCI: aardvark: Update comment about disabling link training Marek Behún
2021-11-25  0:26 ` [PATCH 5.4 11/22] PCI: pci-bridge-emul: Fix array overruns, improve safety Marek Behún
2021-11-25  0:26 ` [PATCH 5.4 12/22] PCI: aardvark: Configure PCIe resources from 'ranges' DT property Marek Behún
2021-11-25  0:26 ` [PATCH 5.4 13/22] PCI: aardvark: Fix PCIe Max Payload Size setting Marek Behún
2021-11-25  0:26 ` [PATCH 5.4 14/22] PCI: aardvark: Deduplicate code in advk_pcie_rd_conf() Marek Behún
2021-11-25  0:26 ` [PATCH 5.4 15/22] PCI: aardvark: Implement re-issuing config requests on CRS response Marek Behún
2021-11-25  0:26 ` [PATCH 5.4 16/22] PCI: aardvark: Simplify initialization of rootcap on virtual bridge Marek Behún
2021-11-25  0:26 ` [PATCH 5.4 17/22] PCI: aardvark: Fix link training Marek Behún
2021-11-25  0:26 ` [PATCH 5.4 18/22] PCI: aardvark: Fix support for bus mastering and PCI_COMMAND on emulated bridge Marek Behún
2021-11-25  0:26 ` [PATCH 5.4 19/22] PCI: aardvark: Set PCI Bridge Class Code to PCI Bridge Marek Behún
2021-11-25  0:26 ` [PATCH 5.4 20/22] PCI: aardvark: Fix support for PCI_BRIDGE_CTL_BUS_RESET on emulated bridge Marek Behún
2021-11-25  0:26 ` [PATCH 5.4 21/22] pinctrl: armada-37xx: Correct PWM pins definitions Marek Behún
2021-11-25  0:26 ` [PATCH 5.4 22/22] arm64: dts: marvell: armada-37xx: Set pcie_reset_pin to gpio function Marek Behún
2021-11-28 13:00 ` [PATCH 5.4 00/22] Armada 3720 PCIe fixes for 5.4 Greg Kroah-Hartman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211125002616.31363-1-kabel@kernel.org \
    --to=kabel@kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=pali@kernel.org \
    --cc=sashal@kernel.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox