From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
stable@vger.kernel.org, Neal Cardwell <ncardwell@google.com>,
Eric Dumazet <edumazet@google.com>,
Stephen Hemminger <stephen@networkplumber.org>,
Yuchung Cheng <ycheng@google.com>,
Soheil Hassas Yeganeh <soheil@google.com>,
Jakub Kicinski <kuba@kernel.org>, Sasha Levin <sashal@kernel.org>
Subject: [PATCH 4.19 51/69] tcp_cubic: fix spurious Hystart ACK train detections for not-cwnd-limited flows
Date: Mon, 29 Nov 2021 19:18:33 +0100 [thread overview]
Message-ID: <20211129181705.318199709@linuxfoundation.org> (raw)
In-Reply-To: <20211129181703.670197996@linuxfoundation.org>
From: Eric Dumazet <edumazet@google.com>
[ Upstream commit 4e1fddc98d2585ddd4792b5e44433dcee7ece001 ]
While testing BIG TCP patch series, I was expecting that TCP_RR workloads
with 80KB requests/answers would send one 80KB TSO packet,
then being received as a single GRO packet.
It turns out this was not happening, and the root cause was that
cubic Hystart ACK train was triggering after a few (2 or 3) rounds of RPC.
Hystart was wrongly setting CWND/SSTHRESH to 30, while my RPC
needed a budget of ~20 segments.
Ideally these TCP_RR flows should not exit slow start.
Cubic Hystart should reset itself at each round, instead of assuming
every TCP flow is a bulk one.
Note that even after this patch, Hystart can still trigger, depending
on scheduling artifacts, but at a higher CWND/SSTHRESH threshold,
keeping optimal TSO packet sizes.
Tested:
ip link set dev eth0 gro_ipv6_max_size 131072 gso_ipv6_max_size 131072
nstat -n; netperf -H ... -t TCP_RR -l 5 -- -r 80000,80000 -K cubic; nstat|egrep "Ip6InReceives|Hystart|Ip6OutRequests"
Before:
8605
Ip6InReceives 87541 0.0
Ip6OutRequests 129496 0.0
TcpExtTCPHystartTrainDetect 1 0.0
TcpExtTCPHystartTrainCwnd 30 0.0
After:
8760
Ip6InReceives 88514 0.0
Ip6OutRequests 87975 0.0
Fixes: ae27e98a5152 ("[TCP] CUBIC v2.3")
Co-developed-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Link: https://lore.kernel.org/r/20211123202535.1843771-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/ipv4/tcp_cubic.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/net/ipv4/tcp_cubic.c b/net/ipv4/tcp_cubic.c
index 8b5ba0a5cd386..93530bd332470 100644
--- a/net/ipv4/tcp_cubic.c
+++ b/net/ipv4/tcp_cubic.c
@@ -340,8 +340,6 @@ static void bictcp_cong_avoid(struct sock *sk, u32 ack, u32 acked)
return;
if (tcp_in_slow_start(tp)) {
- if (hystart && after(ack, ca->end_seq))
- bictcp_hystart_reset(sk);
acked = tcp_slow_start(tp, acked);
if (!acked)
return;
@@ -383,6 +381,9 @@ static void hystart_update(struct sock *sk, u32 delay)
if (ca->found & hystart_detect)
return;
+ if (after(tp->snd_una, ca->end_seq))
+ bictcp_hystart_reset(sk);
+
if (hystart_detect & HYSTART_ACK_TRAIN) {
u32 now = bictcp_clock();
--
2.33.0
next prev parent reply other threads:[~2021-11-29 22:13 UTC|newest]
Thread overview: 77+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-29 18:17 [PATCH 4.19 00/69] 4.19.219-rc1 review Greg Kroah-Hartman
2021-11-29 18:17 ` [PATCH 4.19 01/69] USB: serial: option: add Telit LE910S1 0x9200 composition Greg Kroah-Hartman
2021-11-29 18:17 ` [PATCH 4.19 02/69] USB: serial: option: add Fibocom FM101-GL variants Greg Kroah-Hartman
2021-11-29 18:17 ` [PATCH 4.19 03/69] usb: dwc2: hcd_queue: Fix use of floating point literal Greg Kroah-Hartman
2021-11-29 18:17 ` [PATCH 4.19 04/69] usb: hub: Fix usb enumeration issue due to address0 race Greg Kroah-Hartman
2021-11-29 18:17 ` [PATCH 4.19 05/69] usb: hub: Fix locking issues with address0_mutex Greg Kroah-Hartman
2021-11-29 18:17 ` [PATCH 4.19 06/69] binder: fix test regression due to sender_euid change Greg Kroah-Hartman
2021-11-29 18:17 ` [PATCH 4.19 07/69] ALSA: ctxfi: Fix out-of-range access Greg Kroah-Hartman
2021-11-29 18:17 ` [PATCH 4.19 08/69] media: cec: copy sequence field for the reply Greg Kroah-Hartman
2021-11-29 18:17 ` [PATCH 4.19 09/69] HID: wacom: Use "Confidence" flag to prevent reporting invalid contacts Greg Kroah-Hartman
2021-11-29 18:17 ` [PATCH 4.19 10/69] staging: rtl8192e: Fix use after free in _rtl92e_pci_disconnect() Greg Kroah-Hartman
2021-11-29 18:17 ` [PATCH 4.19 11/69] fuse: fix page stealing Greg Kroah-Hartman
2021-11-29 18:17 ` [PATCH 4.19 12/69] xen: dont continue xenstore initialization in case of errors Greg Kroah-Hartman
2021-11-29 18:17 ` [PATCH 4.19 13/69] xen: detect uninitialized xenbus in xenbus_init Greg Kroah-Hartman
2021-11-29 18:17 ` [PATCH 4.19 14/69] tracing: Fix pid filtering when triggers are attached Greg Kroah-Hartman
2021-11-29 18:17 ` [PATCH 4.19 15/69] xtensa: use CONFIG_USE_OF instead of CONFIG_OF Greg Kroah-Hartman
2021-11-29 18:17 ` [PATCH 4.19 16/69] proc/vmcore: fix clearing user buffer by properly using clear_user() Greg Kroah-Hartman
2021-11-29 18:17 ` [PATCH 4.19 17/69] PCI: aardvark: Fix a leaked reference by adding missing of_node_put() Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 4.19 18/69] PCI: aardvark: Wait for endpoint to be ready before training link Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 4.19 19/69] PCI: aardvark: Train link immediately after enabling training Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 4.19 20/69] PCI: aardvark: Improve link training Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 4.19 21/69] PCI: aardvark: Issue PERST via GPIO Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 4.19 22/69] PCI: aardvark: Replace custom macros by standard linux/pci_regs.h macros Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 4.19 23/69] PCI: aardvark: Indicate error in val when config read fails Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 4.19 24/69] PCI: aardvark: Dont touch PCIe registers if no card connected Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 4.19 25/69] PCI: aardvark: Fix compilation on s390 Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 4.19 26/69] PCI: aardvark: Move PCIe reset card code to advk_pcie_train_link() Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 4.19 27/69] PCI: aardvark: Update comment about disabling link training Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 4.19 28/69] PCI: aardvark: Configure PCIe resources from ranges DT property Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 4.19 29/69] PCI: aardvark: Fix PCIe Max Payload Size setting Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 4.19 30/69] PCI: aardvark: Fix link training Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 4.19 31/69] PCI: aardvark: Fix checking for link up via LTSSM state Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 4.19 32/69] pinctrl: armada-37xx: Correct mpp definitions Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 4.19 33/69] pinctrl: armada-37xx: add missing pin: PCIe1 Wakeup Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 4.19 34/69] pinctrl: armada-37xx: Correct PWM pins definitions Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 4.19 35/69] arm64: dts: marvell: armada-37xx: declare PCIe reset pin Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 4.19 36/69] arm64: dts: marvell: armada-37xx: Set pcie_reset_pin to gpio function Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 4.19 37/69] netfilter: ipvs: Fix reuse connection if RS weight is 0 Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 4.19 38/69] ARM: dts: BCM5301X: Fix I2C controller interrupt Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 4.19 39/69] ARM: dts: BCM5301X: Add interrupt properties to GPIO node Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 4.19 40/69] ASoC: qdsp6: q6routing: Conditionally reset FrontEnd Mixer Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 4.19 41/69] ASoC: topology: Add missing rwsem around snd_ctl_remove() calls Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 4.19 42/69] net: ieee802154: handle iftypes as u32 Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 4.19 43/69] firmware: arm_scmi: pm: Propagate return value to caller Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 4.19 44/69] NFSv42: Dont fail clone() unless the OP_CLONE operation failed Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 4.19 45/69] ARM: socfpga: Fix crash with CONFIG_FORTIRY_SOURCE Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 4.19 46/69] scsi: mpt3sas: Fix kernel panic during drive powercycle test Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 4.19 47/69] drm/vc4: fix error code in vc4_create_object() Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 4.19 48/69] ipv6: fix typos in __ip6_finish_output() Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 4.19 49/69] net/smc: Ensure the active closing peer first closes clcsock Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 4.19 50/69] PM: hibernate: use correct mode for swsusp_close() Greg Kroah-Hartman
2021-11-29 18:18 ` Greg Kroah-Hartman [this message]
2021-11-29 18:18 ` [PATCH 4.19 52/69] MIPS: use 3-level pgtable for 64KB page size on MIPS_VA_BITS_48 Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 4.19 53/69] net/smc: Dont call clcsock shutdown twice when smc shutdown Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 4.19 54/69] net: hns3: fix VF RSS failed problem after PF enable multi-TCs Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 4.19 55/69] vhost/vsock: fix incorrect used length reported to the guest Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 4.19 56/69] tracing: Check pid filtering when creating events Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 4.19 57/69] s390/mm: validate VMA in PGSTE manipulation functions Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 4.19 58/69] hugetlbfs: flush TLBs correctly after huge_pmd_unshare Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 4.19 59/69] NFC: add NCI_UNREG flag to eliminate the race Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 4.19 60/69] fuse: release pipe buf after last use Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 4.19 61/69] xen: sync include/xen/interface/io/ring.h with Xens newest version Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 4.19 62/69] xen/blkfront: read response from backend only once Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 4.19 63/69] xen/blkfront: dont take local copy of a request from the ring page Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 4.19 64/69] xen/blkfront: dont trust the backend response data blindly Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 4.19 65/69] xen/netfront: read response from backend only once Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 4.19 66/69] xen/netfront: dont read data from request on the ring page Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 4.19 67/69] xen/netfront: disentangle tx_skb_freelist Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 4.19 68/69] xen/netfront: dont trust the backend response data blindly Greg Kroah-Hartman
2021-11-29 18:18 ` [PATCH 4.19 69/69] tty: hvc: replace BUG_ON() with negative return value Greg Kroah-Hartman
2021-11-30 1:04 ` [PATCH 4.19 00/69] 4.19.219-rc1 review Shuah Khan
2021-11-30 1:24 ` Samuel Zou
2021-11-30 8:42 ` Jon Hunter
2021-11-30 9:32 ` Naresh Kamboju
2021-11-30 13:38 ` Sudip Mukherjee
2021-11-30 16:02 ` Pavel Machek
2021-11-30 17:42 ` Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211129181705.318199709@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=edumazet@google.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=ncardwell@google.com \
--cc=sashal@kernel.org \
--cc=soheil@google.com \
--cc=stable@vger.kernel.org \
--cc=stephen@networkplumber.org \
--cc=ycheng@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).