[PATCH AUTOSEL 5.4 01/21] clk: imx: Use div64_ul instead of do_div

[PATCH AUTOSEL 5.4 01/21] clk: imx: Use div64_ul instead of do_div

[Sasha Levin]

From: Changcheng Deng <deng.changcheng@zte.com.cn>

[ Upstream commit c1b6ad9a902539f9c037b6b3c35cb134c5724022 ]

do_div() does a 64-by-32 division. Here the divisor is an unsigned long
which on some platforms is 64 bit wide. So use div64_ul instead of do_div
to avoid a possible truncation.

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Changcheng Deng <deng.changcheng@zte.com.cn>
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Link: https://lore.kernel.org/r/20211118080634.165275-1-deng.changcheng@zte.com.cn
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/imx/clk-pllv3.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/clk/imx/clk-pllv3.c b/drivers/clk/imx/clk-pllv3.c
index df91a8244fb4d..c9929d52402b4 100644
--- a/drivers/clk/imx/clk-pllv3.c
+++ b/drivers/clk/imx/clk-pllv3.c
@@ -250,7 +250,7 @@ static long clk_pllv3_av_round_rate(struct clk_hw *hw, unsigned long rate,
 	div = rate / parent_rate;
 	temp64 = (u64) (rate - div * parent_rate);
 	temp64 *= mfd;
-	do_div(temp64, parent_rate);
+	temp64 = div64_ul(temp64, parent_rate);
 	mfn = temp64;
 
 	temp64 = (u64)parent_rate;
@@ -280,7 +280,7 @@ static int clk_pllv3_av_set_rate(struct clk_hw *hw, unsigned long rate,
 	div = rate / parent_rate;
 	temp64 = (u64) (rate - div * parent_rate);
 	temp64 *= mfd;
-	do_div(temp64, parent_rate);
+	temp64 = div64_ul(temp64, parent_rate);
 	mfn = temp64;
 
 	val = readl_relaxed(pll->base);
@@ -337,7 +337,7 @@ static struct clk_pllv3_vf610_mf clk_pllv3_vf610_rate_to_mf(
 		/* rate = parent_rate * (mfi + mfn/mfd) */
 		temp64 = rate - parent_rate * mf.mfi;
 		temp64 *= mf.mfd;
-		do_div(temp64, parent_rate);
+		temp64 = div64_ul(temp64, parent_rate);
 		mf.mfn = temp64;
 	}
 
-- 
2.34.1

[PATCH AUTOSEL 5.4 02/21] powerpc/6xx: add missing of_node_put

[Sasha Levin]

From: Julia Lawall <Julia.Lawall@lip6.fr>

[ Upstream commit f6e82647ff71d427d4148964b71f239fba9d7937 ]

for_each_compatible_node performs an of_node_get on each iteration, so
a break out of the loop requires an of_node_put.

A simplified version of the semantic patch that fixes this problem is as
follows (http://coccinelle.lip6.fr):

// <smpl>
@@
expression e;
local idexpression n;
@@

@@
local idexpression n;
expression e;
@@

 for_each_compatible_node(n,...) {
   ...
(
   of_node_put(n);
|
   e = n
|
+  of_node_put(n);
?  break;
)
   ...
 }
... when != n
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1448051604-25256-2-git-send-email-Julia.Lawall@lip6.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/platforms/embedded6xx/hlwd-pic.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/powerpc/platforms/embedded6xx/hlwd-pic.c b/arch/powerpc/platforms/embedded6xx/hlwd-pic.c
index a1b7f79a8a152..de10c13de15c6 100644
--- a/arch/powerpc/platforms/embedded6xx/hlwd-pic.c
+++ b/arch/powerpc/platforms/embedded6xx/hlwd-pic.c
@@ -215,6 +215,7 @@ void hlwd_pic_probe(void)
 			irq_set_chained_handler(cascade_virq,
 						hlwd_pic_irq_cascade);
 			hlwd_irq_host = host;
+			of_node_put(np);
 			break;
 		}
 	}
-- 
2.34.1

[PATCH AUTOSEL 5.4 03/21] powerpc/powernv: add missing of_node_put

[Sasha Levin]

From: Julia Lawall <Julia.Lawall@lip6.fr>

[ Upstream commit 7d405a939ca960162eb30c1475759cb2fdf38f8c ]

for_each_compatible_node performs an of_node_get on each iteration, so
a break out of the loop requires an of_node_put.

A simplified version of the semantic patch that fixes this problem is as
follows (http://coccinelle.lip6.fr):

// <smpl>
@@
local idexpression n;
expression e;
@@

 for_each_compatible_node(n,...) {
   ...
(
   of_node_put(n);
|
   e = n
|
+  of_node_put(n);
?  break;
)
   ...
 }
... when != n
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1448051604-25256-4-git-send-email-Julia.Lawall@lip6.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/platforms/powernv/opal-lpc.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/powerpc/platforms/powernv/opal-lpc.c b/arch/powerpc/platforms/powernv/opal-lpc.c
index 608569082ba0b..123a0e799b7bd 100644
--- a/arch/powerpc/platforms/powernv/opal-lpc.c
+++ b/arch/powerpc/platforms/powernv/opal-lpc.c
@@ -396,6 +396,7 @@ void __init opal_lpc_init(void)
 		if (!of_get_property(np, "primary", NULL))
 			continue;
 		opal_lpc_chip_id = of_get_ibm_chip_id(np);
+		of_node_put(np);
 		break;
 	}
 	if (opal_lpc_chip_id < 0)
-- 
2.34.1

[PATCH AUTOSEL 5.4 04/21] powerpc/cell: add missing of_node_put

[Sasha Levin]

From: Julia Lawall <Julia.Lawall@lip6.fr>

[ Upstream commit a841fd009e51c8c0a8f07c942e9ab6bb48da8858 ]

for_each_node_by_name performs an of_node_get on each iteration, so
a break out of the loop requires an of_node_put.

A simplified version of the semantic patch that fixes this problem is as
follows (http://coccinelle.lip6.fr):

// <smpl>
@@
expression e,e1;
local idexpression n;
@@

 for_each_node_by_name(n, e1) {
   ... when != of_node_put(n)
       when != e = n
(
   return n;
|
+  of_node_put(n);
?  return ...;
)
   ...
 }
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1448051604-25256-7-git-send-email-Julia.Lawall@lip6.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/platforms/cell/iommu.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c
index ca9ffc1c8685d..a6a60e2b8f453 100644
--- a/arch/powerpc/platforms/cell/iommu.c
+++ b/arch/powerpc/platforms/cell/iommu.c
@@ -976,6 +976,7 @@ static int __init cell_iommu_fixed_mapping_init(void)
 			if (hbase < dbase || (hend > (dbase + dsize))) {
 				pr_debug("iommu: hash window doesn't fit in"
 					 "real DMA window\n");
+				of_node_put(np);
 				return -1;
 			}
 		}
-- 
2.34.1

[PATCH AUTOSEL 5.4 05/21] powerpc/btext: add missing of_node_put

[Sasha Levin]

From: Julia Lawall <Julia.Lawall@lip6.fr>

[ Upstream commit a1d2b210ffa52d60acabbf7b6af3ef7e1e69cda0 ]

for_each_node_by_type performs an of_node_get on each iteration, so
a break out of the loop requires an of_node_put.

A simplified version of the semantic patch that fixes this problem is as
follows (http://coccinelle.lip6.fr):

// <smpl>
@@
local idexpression n;
expression e;
@@

 for_each_node_by_type(n,...) {
   ...
(
   of_node_put(n);
|
   e = n
|
+  of_node_put(n);
?  break;
)
   ...
 }
... when != n
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1448051604-25256-6-git-send-email-Julia.Lawall@lip6.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/kernel/btext.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/kernel/btext.c b/arch/powerpc/kernel/btext.c
index 6dfceaa820e42..b0e0b3cd91eec 100644
--- a/arch/powerpc/kernel/btext.c
+++ b/arch/powerpc/kernel/btext.c
@@ -250,8 +250,10 @@ int __init btext_find_display(int allow_nonstdout)
 			rc = btext_initialize(np);
 			printk("result: %d\n", rc);
 		}
-		if (rc == 0)
+		if (rc == 0) {
+			of_node_put(np);
 			break;
+		}
 	}
 	return rc;
 }
-- 
2.34.1

[PATCH AUTOSEL 5.4 06/21] powerpc/watchdog: Fix missed watchdog reset due to memory ordering race

[Sasha Levin]

From: Nicholas Piggin <npiggin@gmail.com>

[ Upstream commit 5dad4ba68a2483fc80d70b9dc90bbe16e1f27263 ]

It is possible for all CPUs to miss the pending cpumask becoming clear,
and then nobody resetting it, which will cause the lockup detector to
stop working. It will eventually expire, but watchdog_smp_panic will
avoid doing anything if the pending mask is clear and it will never be
reset.

Order the cpumask clear vs the subsequent test to close this race.

Add an extra check for an empty pending mask when the watchdog fires and
finds its bit still clear, to try to catch any other possible races or
bugs here and keep the watchdog working. The extra test in
arch_touch_nmi_watchdog is required to prevent the new warning from
firing off.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com>
Debugged-by: Laurent Dufour <ldufour@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211110025056.2084347-2-npiggin@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/kernel/watchdog.c | 41 +++++++++++++++++++++++++++++++++-
 1 file changed, 40 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/kernel/watchdog.c b/arch/powerpc/kernel/watchdog.c
index af3c15a1d41eb..75b2a6c4db5a5 100644
--- a/arch/powerpc/kernel/watchdog.c
+++ b/arch/powerpc/kernel/watchdog.c
@@ -132,6 +132,10 @@ static void set_cpumask_stuck(const struct cpumask *cpumask, u64 tb)
 {
 	cpumask_or(&wd_smp_cpus_stuck, &wd_smp_cpus_stuck, cpumask);
 	cpumask_andnot(&wd_smp_cpus_pending, &wd_smp_cpus_pending, cpumask);
+	/*
+	 * See wd_smp_clear_cpu_pending()
+	 */
+	smp_mb();
 	if (cpumask_empty(&wd_smp_cpus_pending)) {
 		wd_smp_last_reset_tb = tb;
 		cpumask_andnot(&wd_smp_cpus_pending,
@@ -217,13 +221,44 @@ static void wd_smp_clear_cpu_pending(int cpu, u64 tb)
 
 			cpumask_clear_cpu(cpu, &wd_smp_cpus_stuck);
 			wd_smp_unlock(&flags);
+		} else {
+			/*
+			 * The last CPU to clear pending should have reset the
+			 * watchdog so we generally should not find it empty
+			 * here if our CPU was clear. However it could happen
+			 * due to a rare race with another CPU taking the
+			 * last CPU out of the mask concurrently.
+			 *
+			 * We can't add a warning for it. But just in case
+			 * there is a problem with the watchdog that is causing
+			 * the mask to not be reset, try to kick it along here.
+			 */
+			if (unlikely(cpumask_empty(&wd_smp_cpus_pending)))
+				goto none_pending;
 		}
 		return;
 	}
+
 	cpumask_clear_cpu(cpu, &wd_smp_cpus_pending);
+
+	/*
+	 * Order the store to clear pending with the load(s) to check all
+	 * words in the pending mask to check they are all empty. This orders
+	 * with the same barrier on another CPU. This prevents two CPUs
+	 * clearing the last 2 pending bits, but neither seeing the other's
+	 * store when checking if the mask is empty, and missing an empty
+	 * mask, which ends with a false positive.
+	 */
+	smp_mb();
 	if (cpumask_empty(&wd_smp_cpus_pending)) {
 		unsigned long flags;
 
+none_pending:
+		/*
+		 * Double check under lock because more than one CPU could see
+		 * a clear mask with the lockless check after clearing their
+		 * pending bits.
+		 */
 		wd_smp_lock(&flags);
 		if (cpumask_empty(&wd_smp_cpus_pending)) {
 			wd_smp_last_reset_tb = tb;
@@ -314,8 +349,12 @@ void arch_touch_nmi_watchdog(void)
 {
 	unsigned long ticks = tb_ticks_per_usec * wd_timer_period_ms * 1000;
 	int cpu = smp_processor_id();
-	u64 tb = get_tb();
+	u64 tb;
 
+	if (!cpumask_test_cpu(cpu, &watchdog_cpumask))
+		return;
+
+	tb = get_tb();
 	if (tb - per_cpu(wd_timer_tb, cpu) >= ticks) {
 		per_cpu(wd_timer_tb, cpu) = tb;
 		wd_smp_clear_cpu_pending(cpu, tb);
-- 
2.34.1

[PATCH AUTOSEL 5.4 07/21] i2c: i801: Don't silently correct invalid transfer size

[Sasha Levin]

From: Heiner Kallweit <hkallweit1@gmail.com>

[ Upstream commit effa453168a7eeb8a562ff4edc1dbf9067360a61 ]

If an invalid block size is provided, reject it instead of silently
changing it to a supported value. Especially critical I see the case of
a write transfer with block length 0. In this case we have no guarantee
that the byte we would write is valid. When silently reducing a read to
32 bytes then we don't return an error and the caller may falsely
assume that we returned the full requested data.

If this change should break any (broken) caller, then I think we should
fix the caller.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/i2c/busses/i2c-i801.c | 15 +++++----------
 1 file changed, 5 insertions(+), 10 deletions(-)

diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index a959062ded4f8..4e6d0b722ddcd 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -785,6 +785,11 @@ static int i801_block_transaction(struct i801_priv *priv,
 	int result = 0;
 	unsigned char hostc;
 
+	if (read_write == I2C_SMBUS_READ && command == I2C_SMBUS_BLOCK_DATA)
+		data->block[0] = I2C_SMBUS_BLOCK_MAX;
+	else if (data->block[0] < 1 || data->block[0] > I2C_SMBUS_BLOCK_MAX)
+		return -EPROTO;
+
 	if (command == I2C_SMBUS_I2C_BLOCK_DATA) {
 		if (read_write == I2C_SMBUS_WRITE) {
 			/* set I2C_EN bit in configuration register */
@@ -798,16 +803,6 @@ static int i801_block_transaction(struct i801_priv *priv,
 		}
 	}
 
-	if (read_write == I2C_SMBUS_WRITE
-	 || command == I2C_SMBUS_I2C_BLOCK_DATA) {
-		if (data->block[0] < 1)
-			data->block[0] = 1;
-		if (data->block[0] > I2C_SMBUS_BLOCK_MAX)
-			data->block[0] = I2C_SMBUS_BLOCK_MAX;
-	} else {
-		data->block[0] = 32;	/* max for SMBus block reads */
-	}
-
 	/* Experience has shown that the block buffer can only be used for
 	   SMBus (not I2C) block transactions, even though the datasheet
 	   doesn't mention this limitation. */
-- 
2.34.1

[PATCH AUTOSEL 5.4 08/21] powerpc/smp: Move setup_profiling_timer() under CONFIG_PROFILING

[Sasha Levin]

From: Michael Ellerman <mpe@ellerman.id.au>

[ Upstream commit a4ac0d249a5db80e79d573db9e4ad29354b643a8 ]

setup_profiling_timer() is only needed when CONFIG_PROFILING is enabled.

Fixes the following W=1 warning when CONFIG_PROFILING=n:
  linux/arch/powerpc/kernel/smp.c:1638:5: error: no previous prototype for ‘setup_profiling_timer’

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211124093254.1054750-5-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/kernel/smp.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index c06cac543f188..82dff003a7fd6 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -1296,10 +1296,12 @@ void start_secondary(void *unused)
 	BUG();
 }
 
+#ifdef CONFIG_PROFILING
 int setup_profiling_timer(unsigned int multiplier)
 {
 	return 0;
 }
+#endif
 
 #ifdef CONFIG_SCHED_SMT
 /* cpumask of CPUs with asymetric SMT dependancy */
-- 
2.34.1

[PATCH AUTOSEL 5.4 09/21] i2c: mpc: Correct I2C reset procedure

[Sasha Levin]

From: Joakim Tjernlund <joakim.tjernlund@infinera.com>

[ Upstream commit ebe82cf92cd4825c3029434cabfcd2f1780e64be ]

Current I2C reset procedure is broken in two ways:
1) It only generate 1 START instead of 9 STARTs and STOP.
2) It leaves the bus Busy so every I2C xfer after the first
   fixup calls the reset routine again, for every xfer there after.

This fixes both errors.

Signed-off-by: Joakim Tjernlund <joakim.tjernlund@infinera.com>
Acked-by: Scott Wood <oss@buserror.net>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/i2c/busses/i2c-mpc.c | 23 +++++++++++++++--------
 1 file changed, 15 insertions(+), 8 deletions(-)

diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
index af349661fd769..8de8296d25831 100644
--- a/drivers/i2c/busses/i2c-mpc.c
+++ b/drivers/i2c/busses/i2c-mpc.c
@@ -105,23 +105,30 @@ static irqreturn_t mpc_i2c_isr(int irq, void *dev_id)
 /* Sometimes 9th clock pulse isn't generated, and slave doesn't release
  * the bus, because it wants to send ACK.
  * Following sequence of enabling/disabling and sending start/stop generates
- * the 9 pulses, so it's all OK.
+ * the 9 pulses, each with a START then ending with STOP, so it's all OK.
  */
 static void mpc_i2c_fixup(struct mpc_i2c *i2c)
 {
 	int k;
-	u32 delay_val = 1000000 / i2c->real_clk + 1;
-
-	if (delay_val < 2)
-		delay_val = 2;
+	unsigned long flags;
 
 	for (k = 9; k; k--) {
 		writeccr(i2c, 0);
-		writeccr(i2c, CCR_MSTA | CCR_MTX | CCR_MEN);
+		writeb(0, i2c->base + MPC_I2C_SR); /* clear any status bits */
+		writeccr(i2c, CCR_MEN | CCR_MSTA); /* START */
+		readb(i2c->base + MPC_I2C_DR); /* init xfer */
+		udelay(15); /* let it hit the bus */
+		local_irq_save(flags); /* should not be delayed further */
+		writeccr(i2c, CCR_MEN | CCR_MSTA | CCR_RSTA); /* delay SDA */
 		readb(i2c->base + MPC_I2C_DR);
-		writeccr(i2c, CCR_MEN);
-		udelay(delay_val << 1);
+		if (k != 1)
+			udelay(5);
+		local_irq_restore(flags);
 	}
+	writeccr(i2c, CCR_MEN); /* Initiate STOP */
+	readb(i2c->base + MPC_I2C_DR);
+	udelay(15); /* Let STOP propagate */
+	writeccr(i2c, 0);
 }
 
 static int i2c_wait(struct mpc_i2c *i2c, unsigned timeout, int writing)
-- 
2.34.1

[PATCH AUTOSEL 5.4 10/21] clk: meson: gxbb: Fix the SDM_EN bit for MPLL0 on GXBB

[Sasha Levin]

From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

[ Upstream commit ff54938dd190d85f740b9bf9dde59b550936b621 ]

There are reports that 48kHz audio does not work on the WeTek Play 2
(which uses a GXBB SoC), while 44.1kHz audio works fine on the same
board. There are also reports of 48kHz audio working fine on GXL and
GXM SoCs, which are using an (almost) identical AIU (audio controller).

Experimenting has shown that MPLL0 is causing this problem. In the .dts
we have by default:
	assigned-clocks = <&clkc CLKID_MPLL0>,
			  <&clkc CLKID_MPLL1>,
			  <&clkc CLKID_MPLL2>;
	assigned-clock-rates = <294912000>,
			       <270950400>,
			       <393216000>;
The MPLL0 rate is divisible by 48kHz without remainder and the MPLL1
rate is divisible by 44.1kHz without remainder. Swapping these two clock
rates "fixes" 48kHz audio but breaks 44.1kHz audio.

Everything looks normal when looking at the info provided by the common
clock framework while playing 48kHz audio (via I2S with mclk-fs = 256):
        mpll_prediv                 1        1        0  2000000000
           mpll0_div                1        1        0   294909641
              mpll0                 1        1        0   294909641
                 cts_amclk_sel       1        1        0   294909641
                    cts_amclk_div       1        1        0    12287902
                       cts_amclk       1        1        0    12287902

meson-clk-msr however shows that the actual MPLL0 clock is off by more
than 38MHz:
        mp0_out               333322917    +/-10416Hz

The rate seen by meson-clk-msr is very close to what we would get when
SDM (the fractional part) was ignored:
  (2000000000Hz * 16384) / ((16384 * 6) = 333.33MHz
If SDM was considered the we should get close to:
  (2000000000Hz * 16384) / ((16384 * 6) + 12808) = 294.9MHz

Further experimenting shows that HHI_MPLL_CNTL7[15] does not have any
effect on the rate of MPLL0 as seen my meson-clk-msr (regardless of
whether that bit is zero or one the rate is always the same according to
meson-clk-msr). Using HHI_MPLL_CNTL[25] on the other hand as SDM_EN
results in SDM being considered for the rate output by the hardware. The
rate - as seen by meson-clk-msr - matches with what we expect when
SDM_EN is enabled (fractional part is being considered, resulting in a
294.9MHz output) or disable (fractional part being ignored, resulting in
a 333.33MHz output).

Reported-by: Christian Hewitt <christianshewitt@gmail.com>
Tested-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20211031135006.1508796-1-martin.blumenstingl@googlemail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/meson/gxbb.c | 44 +++++++++++++++++++++++++++++++++++++---
 1 file changed, 41 insertions(+), 3 deletions(-)

diff --git a/drivers/clk/meson/gxbb.c b/drivers/clk/meson/gxbb.c
index 1f9c056e684ce..e8e36ec70b27f 100644
--- a/drivers/clk/meson/gxbb.c
+++ b/drivers/clk/meson/gxbb.c
@@ -712,6 +712,35 @@ static struct clk_regmap gxbb_mpll_prediv = {
 };
 
 static struct clk_regmap gxbb_mpll0_div = {
+	.data = &(struct meson_clk_mpll_data){
+		.sdm = {
+			.reg_off = HHI_MPLL_CNTL7,
+			.shift   = 0,
+			.width   = 14,
+		},
+		.sdm_en = {
+			.reg_off = HHI_MPLL_CNTL,
+			.shift   = 25,
+			.width	 = 1,
+		},
+		.n2 = {
+			.reg_off = HHI_MPLL_CNTL7,
+			.shift   = 16,
+			.width   = 9,
+		},
+		.lock = &meson_clk_lock,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "mpll0_div",
+		.ops = &meson_clk_mpll_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&gxbb_mpll_prediv.hw
+		},
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap gxl_mpll0_div = {
 	.data = &(struct meson_clk_mpll_data){
 		.sdm = {
 			.reg_off = HHI_MPLL_CNTL7,
@@ -748,7 +777,16 @@ static struct clk_regmap gxbb_mpll0 = {
 	.hw.init = &(struct clk_init_data){
 		.name = "mpll0",
 		.ops = &clk_regmap_gate_ops,
-		.parent_hws = (const struct clk_hw *[]) { &gxbb_mpll0_div.hw },
+		.parent_data = &(const struct clk_parent_data) {
+			/*
+			 * Note:
+			 * GXL and GXBB have different SDM_EN registers. We
+			 * fallback to the global naming string mechanism so
+			 * mpll0_div picks up the appropriate one.
+			 */
+			.name = "mpll0_div",
+			.index = -1,
+		},
 		.num_parents = 1,
 		.flags = CLK_SET_RATE_PARENT,
 	},
@@ -3036,7 +3074,7 @@ static struct clk_hw_onecell_data gxl_hw_onecell_data = {
 		[CLKID_VAPB_1]		    = &gxbb_vapb_1.hw,
 		[CLKID_VAPB_SEL]	    = &gxbb_vapb_sel.hw,
 		[CLKID_VAPB]		    = &gxbb_vapb.hw,
-		[CLKID_MPLL0_DIV]	    = &gxbb_mpll0_div.hw,
+		[CLKID_MPLL0_DIV]	    = &gxl_mpll0_div.hw,
 		[CLKID_MPLL1_DIV]	    = &gxbb_mpll1_div.hw,
 		[CLKID_MPLL2_DIV]	    = &gxbb_mpll2_div.hw,
 		[CLKID_MPLL_PREDIV]	    = &gxbb_mpll_prediv.hw,
@@ -3430,7 +3468,7 @@ static struct clk_regmap *const gxl_clk_regmaps[] = {
 	&gxbb_mpll0,
 	&gxbb_mpll1,
 	&gxbb_mpll2,
-	&gxbb_mpll0_div,
+	&gxl_mpll0_div,
 	&gxbb_mpll1_div,
 	&gxbb_mpll2_div,
 	&gxbb_cts_amclk_div,
-- 
2.34.1

[PATCH AUTOSEL 5.4 11/21] powerpc/powermac: Add missing lockdep_register_key()

[Sasha Levin]

From: Christophe Leroy <christophe.leroy@csgroup.eu>

[ Upstream commit df1f679d19edb9eeb67cc2f96b29375f21991945 ]

KeyWest i2c @0xf8001003 irq 42 /uni-n@f8000000/i2c@f8001000
BUG: key c2d00cbc has not been registered!
------------[ cut here ]------------
DEBUG_LOCKS_WARN_ON(1)
WARNING: CPU: 0 PID: 1 at kernel/locking/lockdep.c:4801 lockdep_init_map_type+0x4c0/0xb4c
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.15.5-gentoo-PowerMacG4 #9
NIP:  c01a9428 LR: c01a9428 CTR: 00000000
REGS: e1033cf0 TRAP: 0700   Not tainted  (5.15.5-gentoo-PowerMacG4)
MSR:  00029032 <EE,ME,IR,DR,RI>  CR: 24002002  XER: 00000000

GPR00: c01a9428 e1033db0 c2d1cf20 00000016 00000004 00000001 c01c0630 e1033a73
GPR08: 00000000 00000000 00000000 e1033db0 24002004 00000000 f8729377 00000003
GPR16: c1829a9c 00000000 18305357 c1416fc0 c1416f80 c006ac60 c2d00ca8 c1416f00
GPR24: 00000000 c21586f0 c2160000 00000000 c2d00cbc c2170000 c216e1a0 c2160000
NIP [c01a9428] lockdep_init_map_type+0x4c0/0xb4c
LR [c01a9428] lockdep_init_map_type+0x4c0/0xb4c
Call Trace:
[e1033db0] [c01a9428] lockdep_init_map_type+0x4c0/0xb4c (unreliable)
[e1033df0] [c1c177b8] kw_i2c_add+0x334/0x424
[e1033e20] [c1c18294] pmac_i2c_init+0x9ec/0xa9c
[e1033e80] [c1c1a790] smp_core99_probe+0xbc/0x35c
[e1033eb0] [c1c03cb0] kernel_init_freeable+0x190/0x5a4
[e1033f10] [c000946c] kernel_init+0x28/0x154
[e1033f30] [c0035148] ret_from_kernel_thread+0x14/0x1c

Add missing lockdep_register_key()

Reported-by: Erhard Furtner <erhard_f@mailbox.org>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/69e4f55565bb45ebb0843977801b245af0c666fe.1638264741.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/platforms/powermac/low_i2c.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/powerpc/platforms/powermac/low_i2c.c b/arch/powerpc/platforms/powermac/low_i2c.c
index bf4be4b53b44d..c93ba97b3cb67 100644
--- a/arch/powerpc/platforms/powermac/low_i2c.c
+++ b/arch/powerpc/platforms/powermac/low_i2c.c
@@ -582,6 +582,7 @@ static void __init kw_i2c_add(struct pmac_i2c_host_kw *host,
 	bus->close = kw_i2c_close;
 	bus->xfer = kw_i2c_xfer;
 	mutex_init(&bus->mutex);
+	lockdep_register_key(&bus->lock_key);
 	lockdep_set_class(&bus->mutex, &bus->lock_key);
 	if (controller == busnode)
 		bus->flags = pmac_i2c_multibus;
-- 
2.34.1

[PATCH AUTOSEL 5.4 12/21] KVM: PPC: Book3S: Suppress failed alloc warning in H_COPY_TOFROM_GUEST

[Sasha Levin]

From: Alexey Kardashevskiy <aik@ozlabs.ru>

[ Upstream commit 792020907b11c6f9246c21977cab3bad985ae4b6 ]

H_COPY_TOFROM_GUEST is an hcall for an upper level VM to access its nested
VMs memory. The userspace can trigger WARN_ON_ONCE(!(gfp & __GFP_NOWARN))
in __alloc_pages() by constructing a tiny VM which only does
H_COPY_TOFROM_GUEST with a too big GPR9 (number of bytes to copy).

This silences the warning by adding __GFP_NOWARN.

Spotted by syzkaller.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210901084550.1658699-1-aik@ozlabs.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/kvm/book3s_hv_nested.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/powerpc/kvm/book3s_hv_nested.c b/arch/powerpc/kvm/book3s_hv_nested.c
index 9906d203d9d39..613d24b707abe 100644
--- a/arch/powerpc/kvm/book3s_hv_nested.c
+++ b/arch/powerpc/kvm/book3s_hv_nested.c
@@ -510,7 +510,7 @@ long kvmhv_copy_tofrom_guest_nested(struct kvm_vcpu *vcpu)
 	if (eaddr & (0xFFFUL << 52))
 		return H_PARAMETER;
 
-	buf = kzalloc(n, GFP_KERNEL);
+	buf = kzalloc(n, GFP_KERNEL | __GFP_NOWARN);
 	if (!buf)
 		return H_NO_MEM;
 
-- 
2.34.1

[PATCH AUTOSEL 5.4 13/21] w1: Misuse of get_user()/put_user() reported by sparse

[Sasha Levin]

From: Christophe Leroy <christophe.leroy@csgroup.eu>

[ Upstream commit 33dc3e3e99e626ce51f462d883b05856c6c30b1d ]

sparse warnings: (new ones prefixed by >>)
>> drivers/w1/slaves/w1_ds28e04.c:342:13: sparse: sparse: incorrect type in initializer (different address spaces) @@     expected char [noderef] __user *_pu_addr @@     got char *buf @@
   drivers/w1/slaves/w1_ds28e04.c:342:13: sparse:     expected char [noderef] __user *_pu_addr
   drivers/w1/slaves/w1_ds28e04.c:342:13: sparse:     got char *buf
>> drivers/w1/slaves/w1_ds28e04.c:356:13: sparse: sparse: incorrect type in initializer (different address spaces) @@     expected char const [noderef] __user *_gu_addr @@     got char const *buf @@
   drivers/w1/slaves/w1_ds28e04.c:356:13: sparse:     expected char const [noderef] __user *_gu_addr
   drivers/w1/slaves/w1_ds28e04.c:356:13: sparse:     got char const *buf

The buffer buf is a failsafe buffer in kernel space, it's not user
memory hence doesn't deserve the use of get_user() or put_user().

Access 'buf' content directly.

Link: https://lore.kernel.org/lkml/202111190526.K5vb7NWC-lkp@intel.com/T/
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/d14ed8d71ad4372e6839ae427f91441d3ba0e94d.1637946316.git.christophe.leroy@csgroup.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/w1/slaves/w1_ds28e04.c | 26 ++++++--------------------
 1 file changed, 6 insertions(+), 20 deletions(-)

diff --git a/drivers/w1/slaves/w1_ds28e04.c b/drivers/w1/slaves/w1_ds28e04.c
index 8a640f1590784..06a9966f8c933 100644
--- a/drivers/w1/slaves/w1_ds28e04.c
+++ b/drivers/w1/slaves/w1_ds28e04.c
@@ -32,7 +32,7 @@ static int w1_strong_pullup = 1;
 module_param_named(strong_pullup, w1_strong_pullup, int, 0);
 
 /* enable/disable CRC checking on DS28E04-100 memory accesses */
-static char w1_enable_crccheck = 1;
+static bool w1_enable_crccheck = true;
 
 #define W1_EEPROM_SIZE		512
 #define W1_PAGE_COUNT		16
@@ -339,32 +339,18 @@ static BIN_ATTR_RW(pio, 1);
 static ssize_t crccheck_show(struct device *dev, struct device_attribute *attr,
 			     char *buf)
 {
-	if (put_user(w1_enable_crccheck + 0x30, buf))
-		return -EFAULT;
-
-	return sizeof(w1_enable_crccheck);
+	return sysfs_emit(buf, "%d\n", w1_enable_crccheck);
 }
 
 static ssize_t crccheck_store(struct device *dev, struct device_attribute *attr,
 			      const char *buf, size_t count)
 {
-	char val;
-
-	if (count != 1 || !buf)
-		return -EINVAL;
+	int err = kstrtobool(buf, &w1_enable_crccheck);
 
-	if (get_user(val, buf))
-		return -EFAULT;
+	if (err)
+		return err;
 
-	/* convert to decimal */
-	val = val - 0x30;
-	if (val != 0 && val != 1)
-		return -EINVAL;
-
-	/* set the new value */
-	w1_enable_crccheck = val;
-
-	return sizeof(w1_enable_crccheck);
+	return count;
 }
 
 static DEVICE_ATTR_RW(crccheck);
-- 
2.34.1

[PATCH AUTOSEL 5.4 14/21] scsi: lpfc: Trigger SLI4 firmware dump before doing driver cleanup

[Sasha Levin]

From: James Smart <jsmart2021@gmail.com>

[ Upstream commit 7dd2e2a923173d637c272e483966be8e96a72b64 ]

Extraneous teardown routines are present in the firmware dump path causing
altered states in firmware captures.

When a firmware dump is requested via sysfs, trigger the dump immediately
without tearing down structures and changing adapter state.

The driver shall rely on pre-existing firmware error state clean up
handlers to restore the adapter.

Link: https://lore.kernel.org/r/20211204002644.116455-6-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/lpfc/lpfc.h         |  2 +-
 drivers/scsi/lpfc/lpfc_attr.c    | 62 ++++++++++++++++++++------------
 drivers/scsi/lpfc/lpfc_hbadisc.c |  8 ++++-
 drivers/scsi/lpfc/lpfc_sli.c     |  6 ----
 4 files changed, 48 insertions(+), 30 deletions(-)

diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h
index 8943d42fc406e..0b69f4f713778 100644
--- a/drivers/scsi/lpfc/lpfc.h
+++ b/drivers/scsi/lpfc/lpfc.h
@@ -735,7 +735,6 @@ struct lpfc_hba {
 #define HBA_DEVLOSS_TMO         0x2000 /* HBA in devloss timeout */
 #define HBA_RRQ_ACTIVE		0x4000 /* process the rrq active list */
 #define HBA_IOQ_FLUSH		0x8000 /* FCP/NVME I/O queues being flushed */
-#define HBA_FW_DUMP_OP		0x10000 /* Skips fn reset before FW dump */
 #define HBA_RECOVERABLE_UE	0x20000 /* Firmware supports recoverable UE */
 #define HBA_FORCED_LINK_SPEED	0x40000 /*
 					 * Firmware supports Forced Link Speed
@@ -744,6 +743,7 @@ struct lpfc_hba {
 #define HBA_FLOGI_ISSUED	0x100000 /* FLOGI was issued */
 #define HBA_DEFER_FLOGI		0x800000 /* Defer FLOGI till read_sparm cmpl */
 
+	struct completion *fw_dump_cmpl; /* cmpl event tracker for fw_dump */
 	uint32_t fcp_ring_in_use; /* When polling test if intr-hndlr active*/
 	struct lpfc_dmabuf slim2p;
 
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index f0ecfe565660a..1c541a600149b 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -1537,25 +1537,25 @@ lpfc_sli4_pdev_reg_request(struct lpfc_hba *phba, uint32_t opcode)
 	before_fc_flag = phba->pport->fc_flag;
 	sriov_nr_virtfn = phba->cfg_sriov_nr_virtfn;
 
-	/* Disable SR-IOV virtual functions if enabled */
-	if (phba->cfg_sriov_nr_virtfn) {
-		pci_disable_sriov(pdev);
-		phba->cfg_sriov_nr_virtfn = 0;
-	}
+	if (opcode == LPFC_FW_DUMP) {
+		init_completion(&online_compl);
+		phba->fw_dump_cmpl = &online_compl;
+	} else {
+		/* Disable SR-IOV virtual functions if enabled */
+		if (phba->cfg_sriov_nr_virtfn) {
+			pci_disable_sriov(pdev);
+			phba->cfg_sriov_nr_virtfn = 0;
+		}
 
-	if (opcode == LPFC_FW_DUMP)
-		phba->hba_flag |= HBA_FW_DUMP_OP;
+		status = lpfc_do_offline(phba, LPFC_EVT_OFFLINE);
 
-	status = lpfc_do_offline(phba, LPFC_EVT_OFFLINE);
+		if (status != 0)
+			return status;
 
-	if (status != 0) {
-		phba->hba_flag &= ~HBA_FW_DUMP_OP;
-		return status;
+		/* wait for the device to be quiesced before firmware reset */
+		msleep(100);
 	}
 
-	/* wait for the device to be quiesced before firmware reset */
-	msleep(100);
-
 	reg_val = readl(phba->sli4_hba.conf_regs_memmap_p +
 			LPFC_CTL_PDEV_CTL_OFFSET);
 
@@ -1584,24 +1584,42 @@ lpfc_sli4_pdev_reg_request(struct lpfc_hba *phba, uint32_t opcode)
 		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
 				"3153 Fail to perform the requested "
 				"access: x%x\n", reg_val);
+		if (phba->fw_dump_cmpl)
+			phba->fw_dump_cmpl = NULL;
 		return rc;
 	}
 
 	/* keep the original port state */
-	if (before_fc_flag & FC_OFFLINE_MODE)
-		goto out;
-
-	init_completion(&online_compl);
-	job_posted = lpfc_workq_post_event(phba, &status, &online_compl,
-					   LPFC_EVT_ONLINE);
-	if (!job_posted)
+	if (before_fc_flag & FC_OFFLINE_MODE) {
+		if (phba->fw_dump_cmpl)
+			phba->fw_dump_cmpl = NULL;
 		goto out;
+	}
 
-	wait_for_completion(&online_compl);
+	/* Firmware dump will trigger an HA_ERATT event, and
+	 * lpfc_handle_eratt_s4 routine already handles bringing the port back
+	 * online.
+	 */
+	if (opcode == LPFC_FW_DUMP) {
+		wait_for_completion(phba->fw_dump_cmpl);
+	} else  {
+		init_completion(&online_compl);
+		job_posted = lpfc_workq_post_event(phba, &status, &online_compl,
+						   LPFC_EVT_ONLINE);
+		if (!job_posted)
+			goto out;
 
+		wait_for_completion(&online_compl);
+	}
 out:
 	/* in any case, restore the virtual functions enabled as before */
 	if (sriov_nr_virtfn) {
+		/* If fw_dump was performed, first disable to clean up */
+		if (opcode == LPFC_FW_DUMP) {
+			pci_disable_sriov(pdev);
+			phba->cfg_sriov_nr_virtfn = 0;
+		}
+
 		sriov_err =
 			lpfc_sli_probe_sriov_nr_virtfn(phba, sriov_nr_virtfn);
 		if (!sriov_err)
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index 0dc1d56ff4709..0abce779fbb13 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -628,10 +628,16 @@ lpfc_work_done(struct lpfc_hba *phba)
 	if (phba->pci_dev_grp == LPFC_PCI_DEV_OC)
 		lpfc_sli4_post_async_mbox(phba);
 
-	if (ha_copy & HA_ERATT)
+	if (ha_copy & HA_ERATT) {
 		/* Handle the error attention event */
 		lpfc_handle_eratt(phba);
 
+		if (phba->fw_dump_cmpl) {
+			complete(phba->fw_dump_cmpl);
+			phba->fw_dump_cmpl = NULL;
+		}
+	}
+
 	if (ha_copy & HA_MBATT)
 		lpfc_sli_handle_mb_event(phba);
 
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 51bab0979527b..bd908dd273078 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -4498,12 +4498,6 @@ lpfc_sli4_brdreset(struct lpfc_hba *phba)
 	phba->fcf.fcf_flag = 0;
 	spin_unlock_irq(&phba->hbalock);
 
-	/* SLI4 INTF 2: if FW dump is being taken skip INIT_PORT */
-	if (phba->hba_flag & HBA_FW_DUMP_OP) {
-		phba->hba_flag &= ~HBA_FW_DUMP_OP;
-		return rc;
-	}
-
 	/* Now physically reset the device */
 	lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
 			"0389 Performing PCI function reset!\n");
-- 
2.34.1

[PATCH AUTOSEL 5.4 15/21] ALSA: seq: Set upper limit of processed events

[Sasha Levin]

From: Takashi Iwai <tiwai@suse.de>

[ Upstream commit 6fadb494a638d8b8a55864ecc6ac58194f03f327 ]

Currently ALSA sequencer core tries to process the queued events as
much as possible when they become dispatchable.  If applications try
to queue too massive events to be processed at the very same timing,
the sequencer core would still try to process such all events, either
in the interrupt context or via some notifier; in either away, it
might be a cause of RCU stall or such problems.

As a potential workaround for those problems, this patch adds the
upper limit of the amount of events to be processed.  The remaining
events are processed in the next batch, so they won't be lost.

For the time being, it's limited up to 1000 events per queue, which
should be high enough for any normal usages.

Reported-by: Zqiang <qiang.zhang1211@gmail.com>
Reported-by: syzbot+bb950e68b400ab4f65f8@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/20211102033222.3849-1-qiang.zhang1211@gmail.com
Link: https://lore.kernel.org/r/20211207165146.2888-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/core/seq/seq_queue.c | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

diff --git a/sound/core/seq/seq_queue.c b/sound/core/seq/seq_queue.c
index 71a6ea62c3be7..4ff0b927230c2 100644
--- a/sound/core/seq/seq_queue.c
+++ b/sound/core/seq/seq_queue.c
@@ -234,12 +234,15 @@ struct snd_seq_queue *snd_seq_queue_find_name(char *name)
 
 /* -------------------------------------------------------- */
 
+#define MAX_CELL_PROCESSES_IN_QUEUE	1000
+
 void snd_seq_check_queue(struct snd_seq_queue *q, int atomic, int hop)
 {
 	unsigned long flags;
 	struct snd_seq_event_cell *cell;
 	snd_seq_tick_time_t cur_tick;
 	snd_seq_real_time_t cur_time;
+	int processed = 0;
 
 	if (q == NULL)
 		return;
@@ -262,6 +265,8 @@ void snd_seq_check_queue(struct snd_seq_queue *q, int atomic, int hop)
 		if (!cell)
 			break;
 		snd_seq_dispatch_event(cell, atomic, hop);
+		if (++processed >= MAX_CELL_PROCESSES_IN_QUEUE)
+			goto out; /* the rest processed at the next batch */
 	}
 
 	/* Process time queue... */
@@ -271,14 +276,19 @@ void snd_seq_check_queue(struct snd_seq_queue *q, int atomic, int hop)
 		if (!cell)
 			break;
 		snd_seq_dispatch_event(cell, atomic, hop);
+		if (++processed >= MAX_CELL_PROCESSES_IN_QUEUE)
+			goto out; /* the rest processed at the next batch */
 	}
 
+ out:
 	/* free lock */
 	spin_lock_irqsave(&q->check_lock, flags);
 	if (q->check_again) {
 		q->check_again = 0;
-		spin_unlock_irqrestore(&q->check_lock, flags);
-		goto __again;
+		if (processed < MAX_CELL_PROCESSES_IN_QUEUE) {
+			spin_unlock_irqrestore(&q->check_lock, flags);
+			goto __again;
+		}
 	}
 	q->check_blocked = 0;
 	spin_unlock_irqrestore(&q->check_lock, flags);
-- 
2.34.1

[PATCH AUTOSEL 5.4 16/21] powerpc: handle kdump appropriately with crash_kexec_post_notifiers option

[Sasha Levin]

From: Hari Bathini <hbathini@linux.ibm.com>

[ Upstream commit 219572d2fc4135b5ce65c735d881787d48b10e71 ]

Kdump can be triggered after panic_notifers since commit f06e5153f4ae2
("kernel/panic.c: add "crash_kexec_post_notifiers" option for kdump
after panic_notifers") introduced crash_kexec_post_notifiers option.
But using this option would mean smp_send_stop(), that marks all other
CPUs as offline, gets called before kdump is triggered. As a result,
kdump routines fail to save other CPUs' registers. To fix this, kdump
friendly crash_smp_send_stop() function was introduced with kernel
commit 0ee59413c967 ("x86/panic: replace smp_send_stop() with kdump
friendly version in panic path"). Override this kdump friendly weak
function to handle crash_kexec_post_notifiers option appropriately
on powerpc.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
[Fixed signature of crash_stop_this_cpu() - reported by lkp@intel.com]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211207103719.91117-1-hbathini@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/kernel/smp.c | 30 ++++++++++++++++++++++++++++++
 1 file changed, 30 insertions(+)

diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index 82dff003a7fd6..4de63ec2e1551 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -582,6 +582,36 @@ void crash_send_ipi(void (*crash_ipi_callback)(struct pt_regs *))
 }
 #endif
 
+#ifdef CONFIG_NMI_IPI
+static void crash_stop_this_cpu(struct pt_regs *regs)
+#else
+static void crash_stop_this_cpu(void *dummy)
+#endif
+{
+	/*
+	 * Just busy wait here and avoid marking CPU as offline to ensure
+	 * register data is captured appropriately.
+	 */
+	while (1)
+		cpu_relax();
+}
+
+void crash_smp_send_stop(void)
+{
+	static bool stopped = false;
+
+	if (stopped)
+		return;
+
+	stopped = true;
+
+#ifdef CONFIG_NMI_IPI
+	smp_send_nmi_ipi(NMI_IPI_ALL_OTHERS, crash_stop_this_cpu, 1000000);
+#else
+	smp_call_function(crash_stop_this_cpu, NULL, 0);
+#endif /* CONFIG_NMI_IPI */
+}
+
 #ifdef CONFIG_NMI_IPI
 static void nmi_stop_this_cpu(struct pt_regs *regs)
 {
-- 
2.34.1

[PATCH AUTOSEL 5.4 17/21] MIPS: OCTEON: add put_device() after of_find_device_by_node()

[Sasha Levin]

From: Ye Guojin <ye.guojin@zte.com.cn>

[ Upstream commit 858779df1c0787d3fec827fb705708df9ebdb15b ]

This was found by coccicheck:
./arch/mips/cavium-octeon/octeon-platform.c, 332, 1-7, ERROR missing
put_device; call of_find_device_by_node on line 324, but without a
corresponding object release within this function.
./arch/mips/cavium-octeon/octeon-platform.c, 395, 1-7, ERROR missing
put_device; call of_find_device_by_node on line 387, but without a
corresponding object release within this function.
./arch/mips/cavium-octeon/octeon-usb.c, 512, 3-9, ERROR missing
put_device; call of_find_device_by_node on line 515, but without a
corresponding object release within this function.
./arch/mips/cavium-octeon/octeon-usb.c, 543, 1-7, ERROR missing
put_device; call of_find_device_by_node on line 515, but without a
corresponding object release within this function.

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Ye Guojin <ye.guojin@zte.com.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/cavium-octeon/octeon-platform.c | 2 ++
 arch/mips/cavium-octeon/octeon-usb.c      | 1 +
 2 files changed, 3 insertions(+)

diff --git a/arch/mips/cavium-octeon/octeon-platform.c b/arch/mips/cavium-octeon/octeon-platform.c
index 51685f893eab0..c214fe4e678bb 100644
--- a/arch/mips/cavium-octeon/octeon-platform.c
+++ b/arch/mips/cavium-octeon/octeon-platform.c
@@ -328,6 +328,7 @@ static int __init octeon_ehci_device_init(void)
 
 	pd->dev.platform_data = &octeon_ehci_pdata;
 	octeon_ehci_hw_start(&pd->dev);
+	put_device(&pd->dev);
 
 	return ret;
 }
@@ -391,6 +392,7 @@ static int __init octeon_ohci_device_init(void)
 
 	pd->dev.platform_data = &octeon_ohci_pdata;
 	octeon_ohci_hw_start(&pd->dev);
+	put_device(&pd->dev);
 
 	return ret;
 }
diff --git a/arch/mips/cavium-octeon/octeon-usb.c b/arch/mips/cavium-octeon/octeon-usb.c
index 4017398519cf9..e092d86e63581 100644
--- a/arch/mips/cavium-octeon/octeon-usb.c
+++ b/arch/mips/cavium-octeon/octeon-usb.c
@@ -544,6 +544,7 @@ static int __init dwc3_octeon_device_init(void)
 			devm_iounmap(&pdev->dev, base);
 			devm_release_mem_region(&pdev->dev, res->start,
 						resource_size(res));
+			put_device(&pdev->dev);
 		}
 	} while (node != NULL);
 
-- 
2.34.1

[PATCH AUTOSEL 5.4 18/21] i2c: designware-pci: Fix to change data types of hcnt and lcnt parameters

[Sasha Levin]

From: Lakshmi Sowjanya D <lakshmi.sowjanya.d@intel.com>

[ Upstream commit d52097010078c1844348dc0e467305e5f90fd317 ]

The data type of hcnt and lcnt in the struct dw_i2c_dev is of type u16.
It's better to have same data type in struct dw_scl_sda_cfg as well.

Reported-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Lakshmi Sowjanya D <lakshmi.sowjanya.d@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/i2c/busses/i2c-designware-pcidrv.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/i2c/busses/i2c-designware-pcidrv.c b/drivers/i2c/busses/i2c-designware-pcidrv.c
index 05b35ac33ce33..735326e5eb8cf 100644
--- a/drivers/i2c/busses/i2c-designware-pcidrv.c
+++ b/drivers/i2c/busses/i2c-designware-pcidrv.c
@@ -37,10 +37,10 @@ enum dw_pci_ctl_id_t {
 };
 
 struct dw_scl_sda_cfg {
-	u32 ss_hcnt;
-	u32 fs_hcnt;
-	u32 ss_lcnt;
-	u32 fs_lcnt;
+	u16 ss_hcnt;
+	u16 fs_hcnt;
+	u16 ss_lcnt;
+	u16 fs_lcnt;
 	u32 sda_hold;
 };
 
-- 
2.34.1

[PATCH AUTOSEL 5.4 19/21] MIPS: Octeon: Fix build errors using clang

[Sasha Levin]

From: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>

[ Upstream commit 95339b70677dc6f9a2d669c4716058e71b8dc1c7 ]

A large number of the following errors is reported when compiling
with clang:

  cvmx-bootinfo.h:326:3: error: adding 'int' to a string does not append to the string [-Werror,-Wstring-plus-int]
                  ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_NULL)
                  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  cvmx-bootinfo.h:321:20: note: expanded from macro 'ENUM_BRD_TYPE_CASE'
          case x: return(#x + 16);        /* Skip CVMX_BOARD_TYPE_ */
                         ~~~^~~~
  cvmx-bootinfo.h:326:3: note: use array indexing to silence this warning
  cvmx-bootinfo.h:321:20: note: expanded from macro 'ENUM_BRD_TYPE_CASE'
          case x: return(#x + 16);        /* Skip CVMX_BOARD_TYPE_ */
                          ^

Follow the prompts to use the address operator '&' to fix this error.

Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/include/asm/octeon/cvmx-bootinfo.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/mips/include/asm/octeon/cvmx-bootinfo.h b/arch/mips/include/asm/octeon/cvmx-bootinfo.h
index 62787765575ef..ce6e5fddce0bf 100644
--- a/arch/mips/include/asm/octeon/cvmx-bootinfo.h
+++ b/arch/mips/include/asm/octeon/cvmx-bootinfo.h
@@ -315,7 +315,7 @@ enum cvmx_chip_types_enum {
 
 /* Functions to return string based on type */
 #define ENUM_BRD_TYPE_CASE(x) \
-	case x: return(#x + 16);	/* Skip CVMX_BOARD_TYPE_ */
+	case x: return (&#x[16]);	/* Skip CVMX_BOARD_TYPE_ */
 static inline const char *cvmx_board_type_to_string(enum
 						    cvmx_board_types_enum type)
 {
@@ -404,7 +404,7 @@ static inline const char *cvmx_board_type_to_string(enum
 }
 
 #define ENUM_CHIP_TYPE_CASE(x) \
-	case x: return(#x + 15);	/* Skip CVMX_CHIP_TYPE */
+	case x: return (&#x[15]);	/* Skip CVMX_CHIP_TYPE */
 static inline const char *cvmx_chip_type_to_string(enum
 						   cvmx_chip_types_enum type)
 {
-- 
2.34.1

[PATCH AUTOSEL 5.4 20/21] scsi: sr: Don't use GFP_DMA

[Sasha Levin]

From: Christoph Hellwig <hch@lst.de>

[ Upstream commit d94d94969a4ba07a43d62429c60372320519c391 ]

The allocated buffers are used as a command payload, for which the block
layer and/or DMA API do the proper bounce buffering if needed.

Link: https://lore.kernel.org/r/20211222090842.920724-1-hch@lst.de
Reported-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/sr.c        | 2 +-
 drivers/scsi/sr_vendor.c | 4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/scsi/sr.c b/drivers/scsi/sr.c
index 279dea628620d..310da62cda263 100644
--- a/drivers/scsi/sr.c
+++ b/drivers/scsi/sr.c
@@ -887,7 +887,7 @@ static void get_capabilities(struct scsi_cd *cd)
 
 
 	/* allocate transfer buffer */
-	buffer = kmalloc(512, GFP_KERNEL | GFP_DMA);
+	buffer = kmalloc(512, GFP_KERNEL);
 	if (!buffer) {
 		sr_printk(KERN_ERR, cd, "out of memory.\n");
 		return;
diff --git a/drivers/scsi/sr_vendor.c b/drivers/scsi/sr_vendor.c
index b9db2ec6d0361..996bccadd3866 100644
--- a/drivers/scsi/sr_vendor.c
+++ b/drivers/scsi/sr_vendor.c
@@ -113,7 +113,7 @@ int sr_set_blocklength(Scsi_CD *cd, int blocklength)
 	if (cd->vendor == VENDOR_TOSHIBA)
 		density = (blocklength > 2048) ? 0x81 : 0x83;
 
-	buffer = kmalloc(512, GFP_KERNEL | GFP_DMA);
+	buffer = kmalloc(512, GFP_KERNEL);
 	if (!buffer)
 		return -ENOMEM;
 
@@ -161,7 +161,7 @@ int sr_cd_check(struct cdrom_device_info *cdi)
 	if (cd->cdi.mask & CDC_MULTI_SESSION)
 		return 0;
 
-	buffer = kmalloc(512, GFP_KERNEL | GFP_DMA);
+	buffer = kmalloc(512, GFP_KERNEL);
 	if (!buffer)
 		return -ENOMEM;
 
-- 
2.34.1

[PATCH AUTOSEL 5.4 21/21] ASoC: mediatek: mt8173: fix device_node leak

[Sasha Levin]

From: Tzung-Bi Shih <tzungbi@google.com>

[ Upstream commit 493433785df0075afc0c106ab65f10a605d0b35d ]

Fixes the device_node leak.

Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20211224064719.2031210-2-tzungbi@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/mediatek/mt8173/mt8173-max98090.c      | 3 +++
 sound/soc/mediatek/mt8173/mt8173-rt5650-rt5514.c | 2 ++
 sound/soc/mediatek/mt8173/mt8173-rt5650-rt5676.c | 2 ++
 sound/soc/mediatek/mt8173/mt8173-rt5650.c        | 2 ++
 4 files changed, 9 insertions(+)

diff --git a/sound/soc/mediatek/mt8173/mt8173-max98090.c b/sound/soc/mediatek/mt8173/mt8173-max98090.c
index 22c00600c999f..de1410c2c446f 100644
--- a/sound/soc/mediatek/mt8173/mt8173-max98090.c
+++ b/sound/soc/mediatek/mt8173/mt8173-max98090.c
@@ -180,6 +180,9 @@ static int mt8173_max98090_dev_probe(struct platform_device *pdev)
 	if (ret)
 		dev_err(&pdev->dev, "%s snd_soc_register_card fail %d\n",
 			__func__, ret);
+
+	of_node_put(codec_node);
+	of_node_put(platform_node);
 	return ret;
 }
 
diff --git a/sound/soc/mediatek/mt8173/mt8173-rt5650-rt5514.c b/sound/soc/mediatek/mt8173/mt8173-rt5650-rt5514.c
index 8717e87bfe264..6f8542329bab9 100644
--- a/sound/soc/mediatek/mt8173/mt8173-rt5650-rt5514.c
+++ b/sound/soc/mediatek/mt8173/mt8173-rt5650-rt5514.c
@@ -218,6 +218,8 @@ static int mt8173_rt5650_rt5514_dev_probe(struct platform_device *pdev)
 	if (ret)
 		dev_err(&pdev->dev, "%s snd_soc_register_card fail %d\n",
 			__func__, ret);
+
+	of_node_put(platform_node);
 	return ret;
 }
 
diff --git a/sound/soc/mediatek/mt8173/mt8173-rt5650-rt5676.c b/sound/soc/mediatek/mt8173/mt8173-rt5650-rt5676.c
index 9d4dd97211548..727ff0f7f20b1 100644
--- a/sound/soc/mediatek/mt8173/mt8173-rt5650-rt5676.c
+++ b/sound/soc/mediatek/mt8173/mt8173-rt5650-rt5676.c
@@ -285,6 +285,8 @@ static int mt8173_rt5650_rt5676_dev_probe(struct platform_device *pdev)
 	if (ret)
 		dev_err(&pdev->dev, "%s snd_soc_register_card fail %d\n",
 			__func__, ret);
+
+	of_node_put(platform_node);
 	return ret;
 }
 
diff --git a/sound/soc/mediatek/mt8173/mt8173-rt5650.c b/sound/soc/mediatek/mt8173/mt8173-rt5650.c
index ef6f236752867..21e7d4d3ded5a 100644
--- a/sound/soc/mediatek/mt8173/mt8173-rt5650.c
+++ b/sound/soc/mediatek/mt8173/mt8173-rt5650.c
@@ -309,6 +309,8 @@ static int mt8173_rt5650_dev_probe(struct platform_device *pdev)
 	if (ret)
 		dev_err(&pdev->dev, "%s snd_soc_register_card fail %d\n",
 			__func__, ret);
+
+	of_node_put(platform_node);
 	return ret;
 }
 
-- 
2.34.1