From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
stable@vger.kernel.org, Guenter Roeck <linux@roeck-us.net>,
Sasha Levin <sashal@kernel.org>
Subject: [PATCH 4.4 19/25] hwmon: (lm90) Reduce maximum conversion rate for G781
Date: Tue, 1 Feb 2022 19:16:43 +0100 [thread overview]
Message-ID: <20220201180822.768065388@linuxfoundation.org> (raw)
In-Reply-To: <20220201180822.148370751@linuxfoundation.org>
From: Guenter Roeck <linux@roeck-us.net>
[ Upstream commit a66c5ed539277b9f2363bbace0dba88b85b36c26 ]
According to its datasheet, G781 supports a maximum conversion rate value
of 8 (62.5 ms). However, chips labeled G781 and G780 were found to only
support a maximum conversion rate value of 7 (125 ms). On the other side,
chips labeled G781-1 and G784 were found to support a conversion rate value
of 8. There is no known means to distinguish G780 from G781 or G784; all
chips report the same manufacturer ID and chip revision.
Setting the conversion rate register value to 8 on chips not supporting
it causes unexpected behavior since the real conversion rate is set to 0
(16 seconds) if a value of 8 is written into the conversion rate register.
Limit the conversion rate register value to 7 for all G78x chips to avoid
the problem.
Fixes: ae544f64cc7b ("hwmon: (lm90) Add support for GMT G781")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/hwmon/lm90.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c
index 420f341272621..6f6f173aca6f2 100644
--- a/drivers/hwmon/lm90.c
+++ b/drivers/hwmon/lm90.c
@@ -265,7 +265,7 @@ static const struct lm90_params lm90_params[] = {
.flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT
| LM90_HAVE_BROKEN_ALERT,
.alert_alarms = 0x7c,
- .max_convrate = 8,
+ .max_convrate = 7,
},
[lm86] = {
.flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT,
--
2.34.1
next prev parent reply other threads:[~2022-02-01 18:17 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-02-01 18:16 [PATCH 4.4 00/25] 4.4.302-rc1 review Greg Kroah-Hartman
2022-02-01 18:16 ` [PATCH 4.4 01/25] can: bcm: fix UAF of bcm op Greg Kroah-Hartman
2022-02-01 18:16 ` [PATCH 4.4 02/25] Bluetooth: refactor malicious adv data check Greg Kroah-Hartman
2022-02-01 18:16 ` [PATCH 4.4 03/25] s390/hypfs: include z/VM guests with access control group set Greg Kroah-Hartman
2022-02-01 18:16 ` [PATCH 4.4 04/25] scsi: zfcp: Fix failed recovery on gone remote port with non-NPIV FCP devices Greg Kroah-Hartman
2022-02-01 18:16 ` [PATCH 4.4 05/25] udf: Restore i_lenAlloc when inode expansion fails Greg Kroah-Hartman
2022-02-01 18:16 ` [PATCH 4.4 06/25] udf: Fix NULL ptr deref when converting from inline format Greg Kroah-Hartman
2022-02-01 18:16 ` [PATCH 4.4 07/25] PM: wakeup: simplify the output logic of pm_show_wakelocks() Greg Kroah-Hartman
2022-02-01 18:16 ` [PATCH 4.4 08/25] serial: stm32: fix software flow control transfer Greg Kroah-Hartman
2022-02-01 18:16 ` [PATCH 4.4 09/25] tty: n_gsm: fix SW flow control encoding/handling Greg Kroah-Hartman
2022-02-01 18:16 ` [PATCH 4.4 10/25] tty: Add support for Brainboxes UC cards Greg Kroah-Hartman
2022-02-01 18:16 ` [PATCH 4.4 11/25] usb-storage: Add unusual-devs entry for VL817 USB-SATA bridge Greg Kroah-Hartman
2022-02-01 18:16 ` [PATCH 4.4 12/25] USB: core: Fix hang in usb_kill_urb by adding memory barriers Greg Kroah-Hartman
2022-02-01 18:16 ` [PATCH 4.4 13/25] scsi: bnx2fc: Flush destroy_work queue before calling bnx2fc_interface_put() Greg Kroah-Hartman
2022-02-01 18:16 ` [PATCH 4.4 14/25] ipv6_tunnel: Rate limit warning messages Greg Kroah-Hartman
2022-02-01 18:16 ` [PATCH 4.4 15/25] net: fix information leakage in /proc/net/ptype Greg Kroah-Hartman
2022-02-01 18:16 ` [PATCH 4.4 16/25] ipv4: avoid using shared IP generator for connected sockets Greg Kroah-Hartman
2022-02-01 18:16 ` [PATCH 4.4 17/25] net-procfs: show net devices bound packet types Greg Kroah-Hartman
2022-02-01 18:16 ` [PATCH 4.4 18/25] drm/msm: Fix wrong size calculation Greg Kroah-Hartman
2022-02-01 18:16 ` Greg Kroah-Hartman [this message]
2022-02-01 18:16 ` [PATCH 4.4 20/25] ipv4: raw: lock the socket in raw_bind() Greg Kroah-Hartman
2022-02-01 18:16 ` [PATCH 4.4 21/25] ipv4: tcp: send zero IPID in SYNACK messages Greg Kroah-Hartman
2022-02-01 18:16 ` [PATCH 4.4 22/25] Bluetooth: MGMT: Fix misplaced BT_HS check Greg Kroah-Hartman
2022-02-01 18:16 ` [PATCH 4.4 23/25] Revert "drm/radeon/ci: disable mclk switching for high refresh rates (v2)" Greg Kroah-Hartman
2022-02-01 18:16 ` [PATCH 4.4 24/25] Revert "tc358743: fix register i2c_rd/wr function fix" Greg Kroah-Hartman
2022-02-01 18:16 ` [PATCH 4.4 25/25] KVM: x86: Fix misplaced backport of "work around leak of uninitialized stack contents" Greg Kroah-Hartman
2022-02-01 19:46 ` [PATCH 4.4 00/25] 4.4.302-rc1 review Shuah Khan
2022-02-01 20:51 ` Shuah Khan
2022-02-01 20:54 ` Pavel Machek
2022-02-01 21:24 ` Guenter Roeck
2022-02-01 22:25 ` Shuah Khan
2022-02-02 8:02 ` Naresh Kamboju
2022-02-02 12:18 ` Slade Watkins
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220201180822.768065388@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=sashal@kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).