[PATCH 4.9 00/33] 4.9.303-rc1 review

[PATCH 4.9 00/33] 4.9.303-rc1 review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 4.9.303 release.
There are 33 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Wed, 23 Feb 2022 08:48:58 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.303-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 4.9.303-rc1

Slark Xiao <slark_xiao@163.com>
    net: usb: qmi_wwan: Add support for Dell DW5829e

JaeSang Yoo <js.yoo.5b@gmail.com>
    tracing: Fix tp_printk option related with tp_printk_stop_on_boot

Zoltán Böszörményi <zboszor@gmail.com>
    ata: libata-core: Disable TRIM on M88V29

Trond Myklebust <trond.myklebust@hammerspace.com>
    NFS: Do not report writeback errors in nfs_getattr()

Jim Mattson <jmattson@google.com>
    KVM: x86/pmu: Use AMD64_RAW_EVENT_MASK for PERF_TYPE_RAW

Rafał Miłecki <rafal@milecki.pl>
    i2c: brcmstb: fix support for DSL and CM variants

Eliav Farber <farbere@amazon.com>
    EDAC: Fix calculation of returned address and next offset in edac_align_ptr()

Trond Myklebust <trond.myklebust@hammerspace.com>
    NFS: LOOKUP_DIRECTORY is also ok with symlinks

Mark Brown <broonie@kernel.org>
    ASoC: ops: Fix stereo change notifications in snd_soc_put_volsw_range()

Mark Brown <broonie@kernel.org>
    ASoC: ops: Fix stereo change notifications in snd_soc_put_volsw()

Takashi Iwai <tiwai@suse.de>
    ALSA: hda: Fix missing codec probe on Shenker Dock 15

Takashi Iwai <tiwai@suse.de>
    ALSA: hda: Fix regression on forced probe mask option

Kees Cook <keescook@chromium.org>
    libsubcmd: Fix use-after-free for realloc(..., 0)

Eric Dumazet <edumazet@google.com>
    drop_monitor: fix data-race in dropmon_net_event / trace_napi_poll_hit

Johannes Berg <johannes.berg@intel.com>
    iwlwifi: pcie: fix locking when "HW not ready"

Seth Forshee <sforshee@digitalocean.com>
    vsock: remove vsock from connected table when connect is interrupted by a signal

Sunil Muthuswamy <sunilmut@microsoft.com>
    vsock: correct removal of socket from the list

Eric W. Biederman <ebiederm@xmission.com>
    taskstats: Cleanup the use of task->exit_code

Guillaume Nault <gnault@redhat.com>
    xfrm: Don't accidentally set RTO_ONLINK in decode_session4()

Nicholas Bishop <nicholasbishop@google.com>
    drm/radeon: Fix backlight control on iMac 12,1

Darrick J. Wong <djwong@kernel.org>
    quota: make dquot_quota_sync return errors from ->sync_fs

Darrick J. Wong <djwong@kernel.org>
    vfs: make freeze_super abort when sync_filesystem returns error

Duoming Zhou <duoming@zju.edu.cn>
    ax25: improve the incomplete fix to avoid UAF and NPD bugs

Yang Xu <xuyang2018.jy@fujitsu.com>
    selftests/zram: Adapt the situation that /dev/zram0 is being used

Yang Xu <xuyang2018.jy@fujitsu.com>
    selftests/zram01.sh: Fix compression ratio calculation

Yang Xu <xuyang2018.jy@fujitsu.com>
    selftests/zram: Skip max_comp_streams interface on newer kernel

Miquel Raynal <miquel.raynal@bootlin.com>
    net: ieee802154: at86rf230: Stop leaking skb's

Dāvis Mosāns <davispuh@gmail.com>
    btrfs: send: in case of IO error log it

John David Anglin <dave.anglin@bell.net>
    parisc: Fix sglist access in ccio-dma.c

John David Anglin <dave.anglin@bell.net>
    parisc: Fix data TLB miss in sba_unmap_sg

Randy Dunlap <rdunlap@infradead.org>
    serial: parisc: GSC: fix build when IOSAPIC is not set

Jann Horn <jannh@google.com>
    net: usb: ax88179_178a: Fix out-of-bounds accesses in RX fixup

Nathan Chancellor <nathan@kernel.org>
    Makefile.extrawarn: Move -Wunaligned-access to W=1


-------------

Diffstat:

 Makefile                                        |   4 +-
 arch/x86/kvm/pmu.c                              |   2 +-
 drivers/ata/libata-core.c                       |   1 +
 drivers/edac/edac_mc.c                          |   2 +-
 drivers/gpu/drm/radeon/atombios_encoders.c      |   3 +-
 drivers/i2c/busses/i2c-brcmstb.c                |   2 +-
 drivers/net/ieee802154/at86rf230.c              |  13 ++-
 drivers/net/usb/ax88179_178a.c                  |  68 +++++++-----
 drivers/net/usb/qmi_wwan.c                      |   2 +
 drivers/net/wireless/intel/iwlwifi/pcie/trans.c |   3 +-
 drivers/parisc/ccio-dma.c                       |   3 +-
 drivers/parisc/sba_iommu.c                      |   3 +-
 drivers/tty/serial/8250/8250_gsc.c              |   2 +-
 fs/btrfs/send.c                                 |   4 +
 fs/nfs/dir.c                                    |   4 +-
 fs/nfs/inode.c                                  |   7 +-
 fs/quota/dquot.c                                |  11 +-
 fs/super.c                                      |  19 ++--
 kernel/trace/trace.c                            |   4 +
 kernel/tsacct.c                                 |   7 +-
 net/ax25/af_ax25.c                              |   9 +-
 net/core/drop_monitor.c                         |  11 +-
 net/ipv4/xfrm4_policy.c                         |   3 +-
 net/vmw_vsock/af_vsock.c                        |  39 ++-----
 scripts/Makefile.extrawarn                      |   1 +
 sound/pci/hda/hda_intel.c                       |   5 +-
 sound/soc/soc-ops.c                             |  29 +++--
 tools/lib/subcmd/subcmd-util.h                  |  11 +-
 tools/testing/selftests/zram/zram.sh            |  15 +--
 tools/testing/selftests/zram/zram01.sh          |  33 ++----
 tools/testing/selftests/zram/zram02.sh          |   1 -
 tools/testing/selftests/zram/zram_lib.sh        | 134 ++++++++++++++++--------
 32 files changed, 250 insertions(+), 205 deletions(-)

[PATCH 4.9 01/33] Makefile.extrawarn: Move -Wunaligned-access to W=1

[Greg Kroah-Hartman]

From: Nathan Chancellor <nathan@kernel.org>

commit 1cf5f151d25fcca94689efd91afa0253621fb33a upstream.

-Wunaligned-access is a new warning in clang that is default enabled for
arm and arm64 under certain circumstances within the clang frontend (see
LLVM commit below). On v5.17-rc2, an ARCH=arm allmodconfig build shows
1284 total/70 unique instances of this warning (most of the instances
are in header files), which is quite noisy.

To keep a normal build green through CONFIG_WERROR, only show this
warning with W=1, which will allow automated build systems to catch new
instances of the warning so that the total number can be driven down to
zero eventually since catching unaligned accesses at compile time would
be generally useful.

Cc: stable@vger.kernel.org
Link: https://github.com/llvm/llvm-project/commit/35737df4dcd28534bd3090157c224c19b501278a
Link: https://github.com/ClangBuiltLinux/linux/issues/1569
Link: https://github.com/ClangBuiltLinux/linux/issues/1576
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
[nathan: Fix conflict due to lack of afe956c577b2d]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 scripts/Makefile.extrawarn |    1 +
 1 file changed, 1 insertion(+)

--- a/scripts/Makefile.extrawarn
+++ b/scripts/Makefile.extrawarn
@@ -71,5 +71,6 @@ KBUILD_CFLAGS += $(call cc-disable-warni
 KBUILD_CFLAGS += $(call cc-disable-warning, format-zero-length)
 KBUILD_CFLAGS += $(call cc-disable-warning, uninitialized)
 KBUILD_CFLAGS += $(call cc-disable-warning, pointer-to-enum-cast)
+KBUILD_CFLAGS += $(call cc-disable-warning, unaligned-access)
 endif
 endif

[PATCH 4.9 02/33] net: usb: ax88179_178a: Fix out-of-bounds accesses in RX fixup

[Greg Kroah-Hartman]

From: Jann Horn <jannh@google.com>

commit 57bc3d3ae8c14df3ceb4e17d26ddf9eeab304581 upstream.

ax88179_rx_fixup() contains several out-of-bounds accesses that can be
triggered by a malicious (or defective) USB device, in particular:

 - The metadata array (hdr_off..hdr_off+2*pkt_cnt) can be out of bounds,
   causing OOB reads and (on big-endian systems) OOB endianness flips.
 - A packet can overlap the metadata array, causing a later OOB
   endianness flip to corrupt data used by a cloned SKB that has already
   been handed off into the network stack.
 - A packet SKB can be constructed whose tail is far beyond its end,
   causing out-of-bounds heap data to be considered part of the SKB's
   data.

I have tested that this can be used by a malicious USB device to send a
bogus ICMPv6 Echo Request and receive an ICMPv6 Echo Reply in response
that contains random kernel heap data.
It's probably also possible to get OOB writes from this on a
little-endian system somehow - maybe by triggering skb_cow() via IP
options processing -, but I haven't tested that.

Fixes: e2ca90c276e1 ("ax88179_178a: ASIX AX88179_178A USB 3.0/2.0 to gigabit ethernet adapter driver")
Cc: stable@kernel.org
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/usb/ax88179_178a.c |   68 +++++++++++++++++++++++------------------
 1 file changed, 39 insertions(+), 29 deletions(-)

--- a/drivers/net/usb/ax88179_178a.c
+++ b/drivers/net/usb/ax88179_178a.c
@@ -1369,59 +1369,69 @@ static int ax88179_rx_fixup(struct usbne
 	u16 hdr_off;
 	u32 *pkt_hdr;
 
-	/* This check is no longer done by usbnet */
-	if (skb->len < dev->net->hard_header_len)
+	/* At the end of the SKB, there's a header telling us how many packets
+	 * are bundled into this buffer and where we can find an array of
+	 * per-packet metadata (which contains elements encoded into u16).
+	 */
+	if (skb->len < 4)
 		return 0;
-
 	skb_trim(skb, skb->len - 4);
 	memcpy(&rx_hdr, skb_tail_pointer(skb), 4);
 	le32_to_cpus(&rx_hdr);
-
 	pkt_cnt = (u16)rx_hdr;
 	hdr_off = (u16)(rx_hdr >> 16);
+
+	if (pkt_cnt == 0)
+		return 0;
+
+	/* Make sure that the bounds of the metadata array are inside the SKB
+	 * (and in front of the counter at the end).
+	 */
+	if (pkt_cnt * 2 + hdr_off > skb->len)
+		return 0;
 	pkt_hdr = (u32 *)(skb->data + hdr_off);
 
-	while (pkt_cnt--) {
+	/* Packets must not overlap the metadata array */
+	skb_trim(skb, hdr_off);
+
+	for (; ; pkt_cnt--, pkt_hdr++) {
 		u16 pkt_len;
 
 		le32_to_cpus(pkt_hdr);
 		pkt_len = (*pkt_hdr >> 16) & 0x1fff;
 
-		/* Check CRC or runt packet */
-		if ((*pkt_hdr & AX_RXHDR_CRC_ERR) ||
-		    (*pkt_hdr & AX_RXHDR_DROP_ERR)) {
-			skb_pull(skb, (pkt_len + 7) & 0xFFF8);
-			pkt_hdr++;
-			continue;
-		}
-
-		if (pkt_cnt == 0) {
-			skb->len = pkt_len;
-			/* Skip IP alignment pseudo header */
-			skb_pull(skb, 2);
-			skb_set_tail_pointer(skb, skb->len);
-			skb->truesize = pkt_len + sizeof(struct sk_buff);
-			ax88179_rx_checksum(skb, pkt_hdr);
-			return 1;
-		}
+		if (pkt_len > skb->len)
+			return 0;
 
-		ax_skb = skb_clone(skb, GFP_ATOMIC);
-		if (ax_skb) {
+		/* Check CRC or runt packet */
+		if (((*pkt_hdr & (AX_RXHDR_CRC_ERR | AX_RXHDR_DROP_ERR)) == 0) &&
+		    pkt_len >= 2 + ETH_HLEN) {
+			bool last = (pkt_cnt == 0);
+
+			if (last) {
+				ax_skb = skb;
+			} else {
+				ax_skb = skb_clone(skb, GFP_ATOMIC);
+				if (!ax_skb)
+					return 0;
+			}
 			ax_skb->len = pkt_len;
 			/* Skip IP alignment pseudo header */
 			skb_pull(ax_skb, 2);
 			skb_set_tail_pointer(ax_skb, ax_skb->len);
 			ax_skb->truesize = pkt_len + sizeof(struct sk_buff);
 			ax88179_rx_checksum(ax_skb, pkt_hdr);
+
+			if (last)
+				return 1;
+
 			usbnet_skb_return(dev, ax_skb);
-		} else {
-			return 0;
 		}
 
-		skb_pull(skb, (pkt_len + 7) & 0xFFF8);
-		pkt_hdr++;
+		/* Trim this packet away from the SKB */
+		if (!skb_pull(skb, (pkt_len + 7) & 0xFFF8))
+			return 0;
 	}
-	return 1;
 }
 
 static struct sk_buff *

[PATCH 4.9 03/33] serial: parisc: GSC: fix build when IOSAPIC is not set

[Greg Kroah-Hartman]

From: Randy Dunlap <rdunlap@infradead.org>

commit 6e8793674bb0d1135ca0e5c9f7e16fecbf815926 upstream.

There is a build error when using a kernel .config file from
'kernel test robot' for a different build problem:

hppa64-linux-ld: drivers/tty/serial/8250/8250_gsc.o: in function `.LC3':
(.data.rel.ro+0x18): undefined reference to `iosapic_serial_irq'

when:
  CONFIG_GSC=y
  CONFIG_SERIO_GSCPS2=y
  CONFIG_SERIAL_8250_GSC=y
  CONFIG_PCI is not set
    and hence PCI_LBA is not set.
  IOSAPIC depends on PCI_LBA, so IOSAPIC is not set/enabled.

Make the use of iosapic_serial_irq() conditional to fix the build error.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Helge Deller <deller@gmx.de>
Cc: linux-parisc@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-serial@vger.kernel.org
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: Johan Hovold <johan@kernel.org>
Suggested-by: Helge Deller <deller@gmx.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/8250/8250_gsc.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/tty/serial/8250/8250_gsc.c
+++ b/drivers/tty/serial/8250/8250_gsc.c
@@ -30,7 +30,7 @@ static int __init serial_init_chip(struc
 	unsigned long address;
 	int err;
 
-#ifdef CONFIG_64BIT
+#if defined(CONFIG_64BIT) && defined(CONFIG_IOSAPIC)
 	if (!dev->irq && (dev->id.sversion == 0xad))
 		dev->irq = iosapic_serial_irq(dev);
 #endif

[PATCH 4.9 04/33] parisc: Fix data TLB miss in sba_unmap_sg

[Greg Kroah-Hartman]

From: John David Anglin <dave.anglin@bell.net>

commit b7d6f44a0fa716a82969725516dc0b16bc7cd514 upstream.

Rolf Eike Beer reported the following bug:

[1274934.746891] Bad Address (null pointer deref?): Code=15 (Data TLB miss fault) at addr 0000004140000018
[1274934.746891] CPU: 3 PID: 5549 Comm: cmake Not tainted 5.15.4-gentoo-parisc64 #4
[1274934.746891] Hardware name: 9000/785/C8000
[1274934.746891]
[1274934.746891]      YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI
[1274934.746891] PSW: 00001000000001001111111000001110 Not tainted
[1274934.746891] r00-03  000000ff0804fe0e 0000000040bc9bc0 00000000406760e4 0000004140000000
[1274934.746891] r04-07  0000000040b693c0 0000004140000000 000000004a2b08b0 0000000000000001
[1274934.746891] r08-11  0000000041f98810 0000000000000000 000000004a0a7000 0000000000000001
[1274934.746891] r12-15  0000000040bddbc0 0000000040c0cbc0 0000000040bddbc0 0000000040bddbc0
[1274934.746891] r16-19  0000000040bde3c0 0000000040bddbc0 0000000040bde3c0 0000000000000007
[1274934.746891] r20-23  0000000000000006 000000004a368950 0000000000000000 0000000000000001
[1274934.746891] r24-27  0000000000001fff 000000000800000e 000000004a1710f0 0000000040b693c0
[1274934.746891] r28-31  0000000000000001 0000000041f988b0 0000000041f98840 000000004a171118
[1274934.746891] sr00-03  00000000066e5800 0000000000000000 0000000000000000 00000000066e5800
[1274934.746891] sr04-07  0000000000000000 0000000000000000 0000000000000000 0000000000000000
[1274934.746891]
[1274934.746891] IASQ: 0000000000000000 0000000000000000 IAOQ: 00000000406760e8 00000000406760ec
[1274934.746891]  IIR: 48780030    ISR: 0000000000000000  IOR: 0000004140000018
[1274934.746891]  CPU:        3   CR30: 00000040e3a9c000 CR31: ffffffffffffffff
[1274934.746891]  ORIG_R28: 0000000040acdd58
[1274934.746891]  IAOQ[0]: sba_unmap_sg+0xb0/0x118
[1274934.746891]  IAOQ[1]: sba_unmap_sg+0xb4/0x118
[1274934.746891]  RP(r2): sba_unmap_sg+0xac/0x118
[1274934.746891] Backtrace:
[1274934.746891]  [<00000000402740cc>] dma_unmap_sg_attrs+0x6c/0x70
[1274934.746891]  [<000000004074d6bc>] scsi_dma_unmap+0x54/0x60
[1274934.746891]  [<00000000407a3488>] mptscsih_io_done+0x150/0xd70
[1274934.746891]  [<0000000040798600>] mpt_interrupt+0x168/0xa68
[1274934.746891]  [<0000000040255a48>] __handle_irq_event_percpu+0xc8/0x278
[1274934.746891]  [<0000000040255c34>] handle_irq_event_percpu+0x3c/0xd8
[1274934.746891]  [<000000004025ecb4>] handle_percpu_irq+0xb4/0xf0
[1274934.746891]  [<00000000402548e0>] generic_handle_irq+0x50/0x70
[1274934.746891]  [<000000004019a254>] call_on_stack+0x18/0x24
[1274934.746891]
[1274934.746891] Kernel panic - not syncing: Bad Address (null pointer deref?)

The bug is caused by overrunning the sglist and incorrectly testing
sg_dma_len(sglist) before nents. Normally this doesn't cause a crash,
but in this case sglist crossed a page boundary. This occurs in the
following code:

	while (sg_dma_len(sglist) && nents--) {

The fix is simply to test nents first and move the decrement of nents
into the loop.

Reported-by: Rolf Eike Beer <eike-kernel@sf-tec.de>
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Cc: stable@vger.kernel.org
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/parisc/sba_iommu.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/parisc/sba_iommu.c
+++ b/drivers/parisc/sba_iommu.c
@@ -1061,7 +1061,7 @@ sba_unmap_sg(struct device *dev, struct
 	spin_unlock_irqrestore(&ioc->res_lock, flags);
 #endif
 
-	while (sg_dma_len(sglist) && nents--) {
+	while (nents && sg_dma_len(sglist)) {
 
 		sba_unmap_page(dev, sg_dma_address(sglist), sg_dma_len(sglist),
 				direction, 0);
@@ -1070,6 +1070,7 @@ sba_unmap_sg(struct device *dev, struct
 		ioc->usingle_calls--;	/* kluge since call is unmap_sg() */
 #endif
 		++sglist;
+		nents--;
 	}
 
 	DBG_RUN_SG("%s() DONE (nents %d)\n", __func__,  nents);

[PATCH 4.9 05/33] parisc: Fix sglist access in ccio-dma.c

[Greg Kroah-Hartman]

From: John David Anglin <dave.anglin@bell.net>

commit d7da660cab47183cded65e11b64497d0f56c6edf upstream.

This patch implements the same bug fix to ccio-dma.c as to sba_iommu.c.
It ensures that only the allocated entries of the sglist are accessed.

Signed-off-by: John David Anglin <dave.anglin@bell.net>
Cc: stable@vger.kernel.org
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/parisc/ccio-dma.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/parisc/ccio-dma.c
+++ b/drivers/parisc/ccio-dma.c
@@ -1008,7 +1008,7 @@ ccio_unmap_sg(struct device *dev, struct
 	ioc->usg_calls++;
 #endif
 
-	while(sg_dma_len(sglist) && nents--) {
+	while (nents && sg_dma_len(sglist)) {
 
 #ifdef CCIO_COLLECT_STATS
 		ioc->usg_pages += sg_dma_len(sglist) >> PAGE_SHIFT;
@@ -1016,6 +1016,7 @@ ccio_unmap_sg(struct device *dev, struct
 		ccio_unmap_page(dev, sg_dma_address(sglist),
 				  sg_dma_len(sglist), direction, 0);
 		++sglist;
+		nents--;
 	}
 
 	DBG_RUN_SG("%s() DONE (nents %d)\n", __func__, nents);

[PATCH 4.9 06/33] btrfs: send: in case of IO error log it

[Greg Kroah-Hartman]

From: Dāvis Mosāns <davispuh@gmail.com>

commit 2e7be9db125a0bf940c5d65eb5c40d8700f738b5 upstream.

Currently if we get IO error while doing send then we abort without
logging information about which file caused issue.  So log it to help
with debugging.

CC: stable@vger.kernel.org # 4.9+
Signed-off-by: Dāvis Mosāns <davispuh@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/btrfs/send.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/fs/btrfs/send.c
+++ b/fs/btrfs/send.c
@@ -4675,6 +4675,10 @@ static ssize_t fill_read_buf(struct send
 			lock_page(page);
 			if (!PageUptodate(page)) {
 				unlock_page(page);
+				btrfs_err(fs_info,
+			"send: IO error at offset %llu for inode %llu root %llu",
+					page_offset(page), sctx->cur_ino,
+					sctx->send_root->root_key.objectid);
 				put_page(page);
 				ret = -EIO;
 				break;

[PATCH 4.9 07/33] net: ieee802154: at86rf230: Stop leaking skbs

[Greg Kroah-Hartman]

From: Miquel Raynal <miquel.raynal@bootlin.com>

[ Upstream commit e5ce576d45bf72fd0e3dc37eff897bfcc488f6a9 ]

Upon error the ieee802154_xmit_complete() helper is not called. Only
ieee802154_wake_queue() is called manually. In the Tx case we then leak
the skb structure.

Free the skb structure upon error before returning when appropriate.

As the 'is_tx = 0' cannot be moved in the complete handler because of a
possible race between the delay in switching to STATE_RX_AACK_ON and a
new interrupt, we introduce an intermediate 'was_tx' boolean just for
this purpose.

There is no Fixes tag applying here, many changes have been made on this
area and the issue kind of always existed.

Suggested-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20220125121426.848337-4-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ieee802154/at86rf230.c | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ieee802154/at86rf230.c b/drivers/net/ieee802154/at86rf230.c
index ce3b7fb7eda09..80c8e9abb402e 100644
--- a/drivers/net/ieee802154/at86rf230.c
+++ b/drivers/net/ieee802154/at86rf230.c
@@ -108,6 +108,7 @@ struct at86rf230_local {
 	unsigned long cal_timeout;
 	bool is_tx;
 	bool is_tx_from_off;
+	bool was_tx;
 	u8 tx_retry;
 	struct sk_buff *tx_skb;
 	struct at86rf230_state_change tx;
@@ -351,7 +352,11 @@ at86rf230_async_error_recover_complete(void *context)
 	if (ctx->free)
 		kfree(ctx);
 
-	ieee802154_wake_queue(lp->hw);
+	if (lp->was_tx) {
+		lp->was_tx = 0;
+		dev_kfree_skb_any(lp->tx_skb);
+		ieee802154_wake_queue(lp->hw);
+	}
 }
 
 static void
@@ -360,7 +365,11 @@ at86rf230_async_error_recover(void *context)
 	struct at86rf230_state_change *ctx = context;
 	struct at86rf230_local *lp = ctx->lp;
 
-	lp->is_tx = 0;
+	if (lp->is_tx) {
+		lp->was_tx = 1;
+		lp->is_tx = 0;
+	}
+
 	at86rf230_async_state_change(lp, ctx, STATE_RX_AACK_ON,
 				     at86rf230_async_error_recover_complete);
 }
-- 
2.34.1

[PATCH 4.9 08/33] selftests/zram: Skip max_comp_streams interface on newer kernel

[Greg Kroah-Hartman]

From: Yang Xu <xuyang2018.jy@fujitsu.com>

[ Upstream commit fc4eb486a59d70bd35cf1209f0e68c2d8b979193 ]

Since commit 43209ea2d17a ("zram: remove max_comp_streams internals"), zram
has switched to per-cpu streams. Even kernel still keep this interface for
some reasons, but writing to max_comp_stream doesn't take any effect. So
skip it on newer kernel ie 4.7.

The code that comparing kernel version is from xfstests testsuite ext4/053.

Signed-off-by: Yang Xu <xuyang2018.jy@fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/zram/zram_lib.sh | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/tools/testing/selftests/zram/zram_lib.sh b/tools/testing/selftests/zram/zram_lib.sh
index 9e73a4fb9b0aa..2c1d1c567f854 100755
--- a/tools/testing/selftests/zram/zram_lib.sh
+++ b/tools/testing/selftests/zram/zram_lib.sh
@@ -20,6 +20,9 @@ dev_mounted=-1
 
 # Kselftest framework requirement - SKIP code is 4.
 ksft_skip=4
+kernel_version=`uname -r | cut -d'.' -f1,2`
+kernel_major=${kernel_version%.*}
+kernel_minor=${kernel_version#*.}
 
 trap INT
 
@@ -34,6 +37,20 @@ check_prereqs()
 	fi
 }
 
+kernel_gte()
+{
+	major=${1%.*}
+	minor=${1#*.}
+
+	if [ $kernel_major -gt $major ]; then
+		return 0
+	elif [[ $kernel_major -eq $major && $kernel_minor -ge $minor ]]; then
+		return 0
+	fi
+
+	return 1
+}
+
 zram_cleanup()
 {
 	echo "zram cleanup"
@@ -95,6 +112,13 @@ zram_max_streams()
 {
 	echo "set max_comp_streams to zram device(s)"
 
+	kernel_gte 4.7
+	if [ $? -eq 0 ]; then
+		echo "The device attribute max_comp_streams was"\
+		               "deprecated in 4.7"
+		return 0
+	fi
+
 	local i=0
 	for max_s in $zram_max_streams; do
 		local sys_path="/sys/block/zram${i}/max_comp_streams"
-- 
2.34.1

[PATCH 4.9 09/33] selftests/zram01.sh: Fix compression ratio calculation

[Greg Kroah-Hartman]

From: Yang Xu <xuyang2018.jy@fujitsu.com>

[ Upstream commit d18da7ec3719559d6e74937266d0416e6c7e0b31 ]

zram01 uses `free -m` to measure zram memory usage. The results are no
sense because they are polluted by all running processes on the system.

We Should only calculate the free memory delta for the current process.
So use the third field of /sys/block/zram<id>/mm_stat to measure memory
usage instead. The file is available since kernel 4.1.

orig_data_size(first): uncompressed size of data stored in this disk.
compr_data_size(second): compressed size of data stored in this disk
mem_used_total(third): the amount of memory allocated for this disk

Also remove useless zram cleanup call in zram_fill_fs and so we don't
need to cleanup zram twice if fails.

Signed-off-by: Yang Xu <xuyang2018.jy@fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/zram/zram01.sh | 30 +++++++-------------------
 1 file changed, 8 insertions(+), 22 deletions(-)

diff --git a/tools/testing/selftests/zram/zram01.sh b/tools/testing/selftests/zram/zram01.sh
index b9566a6478a9c..ac6e4ddd2604e 100755
--- a/tools/testing/selftests/zram/zram01.sh
+++ b/tools/testing/selftests/zram/zram01.sh
@@ -42,8 +42,6 @@ zram_algs="lzo"
 
 zram_fill_fs()
 {
-	local mem_free0=$(free -m | awk 'NR==2 {print $4}')
-
 	for i in $(seq 0 $(($dev_num - 1))); do
 		echo "fill zram$i..."
 		local b=0
@@ -54,29 +52,17 @@ zram_fill_fs()
 			b=$(($b + 1))
 		done
 		echo "zram$i can be filled with '$b' KB"
-	done
 
-	local mem_free1=$(free -m | awk 'NR==2 {print $4}')
-	local used_mem=$(($mem_free0 - $mem_free1))
+		local mem_used_total=`awk '{print $3}' "/sys/block/zram$i/mm_stat"`
+		local v=$((100 * 1024 * $b / $mem_used_total))
+		if [ "$v" -lt 100 ]; then
+			 echo "FAIL compression ratio: 0.$v:1"
+			 ERR_CODE=-1
+			 return
+		fi
 
-	local total_size=0
-	for sm in $zram_sizes; do
-		local s=$(echo $sm | sed 's/M//')
-		total_size=$(($total_size + $s))
+		echo "zram compression ratio: $(echo "scale=2; $v / 100 " | bc):1: OK"
 	done
-
-	echo "zram used ${used_mem}M, zram disk sizes ${total_size}M"
-
-	local v=$((100 * $total_size / $used_mem))
-
-	if [ "$v" -lt 100 ]; then
-		echo "FAIL compression ratio: 0.$v:1"
-		ERR_CODE=-1
-		zram_cleanup
-		return
-	fi
-
-	echo "zram compression ratio: $(echo "scale=2; $v / 100 " | bc):1: OK"
 }
 
 check_prereqs
-- 
2.34.1

[PATCH 4.9 10/33] selftests/zram: Adapt the situation that /dev/zram0 is being used

[Greg Kroah-Hartman]

From: Yang Xu <xuyang2018.jy@fujitsu.com>

[ Upstream commit 01dabed20573804750af5c7bf8d1598a6bf7bf6e ]

If zram-generator package is installed and works, then we can not remove
zram module because zram swap is being used. This case needs a clean zram
environment, change this test by using hot_add/hot_remove interface. So
even zram device is being used, we still can add zram device and remove
them in cleanup.

The two interface was introduced since kernel commit 6566d1a32bf7("zram:
add dynamic device add/remove functionality") in v4.2-rc1. If kernel
supports these two interface, we use hot_add/hot_remove to slove this
problem, if not, just check whether zram is being used or built in, then
skip it on old kernel.

Signed-off-by: Yang Xu <xuyang2018.jy@fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/zram/zram.sh     |  15 +---
 tools/testing/selftests/zram/zram01.sh   |   3 +-
 tools/testing/selftests/zram/zram02.sh   |   1 -
 tools/testing/selftests/zram/zram_lib.sh | 110 +++++++++++++----------
 4 files changed, 66 insertions(+), 63 deletions(-)

diff --git a/tools/testing/selftests/zram/zram.sh b/tools/testing/selftests/zram/zram.sh
index 9399c4aeaa265..d4652e295ff8a 100755
--- a/tools/testing/selftests/zram/zram.sh
+++ b/tools/testing/selftests/zram/zram.sh
@@ -1,9 +1,6 @@
 #!/bin/bash
 TCID="zram.sh"
 
-# Kselftest framework requirement - SKIP code is 4.
-ksft_skip=4
-
 . ./zram_lib.sh
 
 run_zram () {
@@ -17,14 +14,4 @@ echo ""
 
 check_prereqs
 
-# check zram module exists
-MODULE_PATH=/lib/modules/`uname -r`/kernel/drivers/block/zram/zram.ko
-if [ -f $MODULE_PATH ]; then
-	run_zram
-elif [ -b /dev/zram0 ]; then
-	run_zram
-else
-	echo "$TCID : No zram.ko module or /dev/zram0 device file not found"
-	echo "$TCID : CONFIG_ZRAM is not set"
-	exit $ksft_skip
-fi
+run_zram
diff --git a/tools/testing/selftests/zram/zram01.sh b/tools/testing/selftests/zram/zram01.sh
index ac6e4ddd2604e..8abc9965089d1 100755
--- a/tools/testing/selftests/zram/zram01.sh
+++ b/tools/testing/selftests/zram/zram01.sh
@@ -42,7 +42,7 @@ zram_algs="lzo"
 
 zram_fill_fs()
 {
-	for i in $(seq 0 $(($dev_num - 1))); do
+	for i in $(seq $dev_start $dev_end); do
 		echo "fill zram$i..."
 		local b=0
 		while [ true ]; do
@@ -76,7 +76,6 @@ zram_mount
 
 zram_fill_fs
 zram_cleanup
-zram_unload
 
 if [ $ERR_CODE -ne 0 ]; then
 	echo "$TCID : [FAIL]"
diff --git a/tools/testing/selftests/zram/zram02.sh b/tools/testing/selftests/zram/zram02.sh
index 74569b883737f..3768cfd2e5f83 100755
--- a/tools/testing/selftests/zram/zram02.sh
+++ b/tools/testing/selftests/zram/zram02.sh
@@ -45,7 +45,6 @@ zram_set_memlimit
 zram_makeswap
 zram_swapoff
 zram_cleanup
-zram_unload
 
 if [ $ERR_CODE -ne 0 ]; then
 	echo "$TCID : [FAIL]"
diff --git a/tools/testing/selftests/zram/zram_lib.sh b/tools/testing/selftests/zram/zram_lib.sh
index 2c1d1c567f854..130d193cbd727 100755
--- a/tools/testing/selftests/zram/zram_lib.sh
+++ b/tools/testing/selftests/zram/zram_lib.sh
@@ -14,10 +14,12 @@
 # Author: Alexey Kodanev <alexey.kodanev@oracle.com>
 # Modified: Naresh Kamboju <naresh.kamboju@linaro.org>
 
-MODULE=0
 dev_makeswap=-1
 dev_mounted=-1
-
+dev_start=0
+dev_end=-1
+module_load=-1
+sys_control=-1
 # Kselftest framework requirement - SKIP code is 4.
 ksft_skip=4
 kernel_version=`uname -r | cut -d'.' -f1,2`
@@ -55,57 +57,72 @@ zram_cleanup()
 {
 	echo "zram cleanup"
 	local i=
-	for i in $(seq 0 $dev_makeswap); do
+	for i in $(seq $dev_start $dev_makeswap); do
 		swapoff /dev/zram$i
 	done
 
-	for i in $(seq 0 $dev_mounted); do
+	for i in $(seq $dev_start $dev_mounted); do
 		umount /dev/zram$i
 	done
 
-	for i in $(seq 0 $(($dev_num - 1))); do
+	for i in $(seq $dev_start $dev_end); do
 		echo 1 > /sys/block/zram${i}/reset
 		rm -rf zram$i
 	done
 
-}
+	if [ $sys_control -eq 1 ]; then
+		for i in $(seq $dev_start $dev_end); do
+			echo $i > /sys/class/zram-control/hot_remove
+		done
+	fi
 
-zram_unload()
-{
-	if [ $MODULE -ne 0 ] ; then
-		echo "zram rmmod zram"
+	if [ $module_load -eq 1 ]; then
 		rmmod zram > /dev/null 2>&1
 	fi
 }
 
 zram_load()
 {
-	# check zram module exists
-	MODULE_PATH=/lib/modules/`uname -r`/kernel/drivers/block/zram/zram.ko
-	if [ -f $MODULE_PATH ]; then
-		MODULE=1
-		echo "create '$dev_num' zram device(s)"
-		modprobe zram num_devices=$dev_num
-		if [ $? -ne 0 ]; then
-			echo "failed to insert zram module"
-			exit 1
-		fi
-
-		dev_num_created=$(ls /dev/zram* | wc -w)
+	echo "create '$dev_num' zram device(s)"
+
+	# zram module loaded, new kernel
+	if [ -d "/sys/class/zram-control" ]; then
+		echo "zram modules already loaded, kernel supports" \
+			"zram-control interface"
+		dev_start=$(ls /dev/zram* | wc -w)
+		dev_end=$(($dev_start + $dev_num - 1))
+		sys_control=1
+
+		for i in $(seq $dev_start $dev_end); do
+			cat /sys/class/zram-control/hot_add > /dev/null
+		done
+
+		echo "all zram devices (/dev/zram$dev_start~$dev_end" \
+			"successfully created"
+		return 0
+	fi
 
-		if [ "$dev_num_created" -ne "$dev_num" ]; then
-			echo "unexpected num of devices: $dev_num_created"
-			ERR_CODE=-1
+	# detect old kernel or built-in
+	modprobe zram num_devices=$dev_num
+	if [ ! -d "/sys/class/zram-control" ]; then
+		if grep -q '^zram' /proc/modules; then
+			rmmod zram > /dev/null 2>&1
+			if [ $? -ne 0 ]; then
+				echo "zram module is being used on old kernel" \
+					"without zram-control interface"
+				exit $ksft_skip
+			fi
 		else
-			echo "zram load module successful"
+			echo "test needs CONFIG_ZRAM=m on old kernel without" \
+				"zram-control interface"
+			exit $ksft_skip
 		fi
-	elif [ -b /dev/zram0 ]; then
-		echo "/dev/zram0 device file found: OK"
-	else
-		echo "ERROR: No zram.ko module or no /dev/zram0 device found"
-		echo "$TCID : CONFIG_ZRAM is not set"
-		exit 1
+		modprobe zram num_devices=$dev_num
 	fi
+
+	module_load=1
+	dev_end=$(($dev_num - 1))
+	echo "all zram devices (/dev/zram0~$dev_end) successfully created"
 }
 
 zram_max_streams()
@@ -119,7 +136,7 @@ zram_max_streams()
 		return 0
 	fi
 
-	local i=0
+	local i=$dev_start
 	for max_s in $zram_max_streams; do
 		local sys_path="/sys/block/zram${i}/max_comp_streams"
 		echo $max_s > $sys_path || \
@@ -131,7 +148,7 @@ zram_max_streams()
 			echo "FAIL can't set max_streams '$max_s', get $max_stream"
 
 		i=$(($i + 1))
-		echo "$sys_path = '$max_streams' ($i/$dev_num)"
+		echo "$sys_path = '$max_streams'"
 	done
 
 	echo "zram max streams: OK"
@@ -141,15 +158,16 @@ zram_compress_alg()
 {
 	echo "test that we can set compression algorithm"
 
-	local algs=$(cat /sys/block/zram0/comp_algorithm)
+	local i=$dev_start
+	local algs=$(cat /sys/block/zram${i}/comp_algorithm)
 	echo "supported algs: $algs"
-	local i=0
+
 	for alg in $zram_algs; do
 		local sys_path="/sys/block/zram${i}/comp_algorithm"
 		echo "$alg" >	$sys_path || \
 			echo "FAIL can't set '$alg' to $sys_path"
 		i=$(($i + 1))
-		echo "$sys_path = '$alg' ($i/$dev_num)"
+		echo "$sys_path = '$alg'"
 	done
 
 	echo "zram set compression algorithm: OK"
@@ -158,14 +176,14 @@ zram_compress_alg()
 zram_set_disksizes()
 {
 	echo "set disk size to zram device(s)"
-	local i=0
+	local i=$dev_start
 	for ds in $zram_sizes; do
 		local sys_path="/sys/block/zram${i}/disksize"
 		echo "$ds" >	$sys_path || \
 			echo "FAIL can't set '$ds' to $sys_path"
 
 		i=$(($i + 1))
-		echo "$sys_path = '$ds' ($i/$dev_num)"
+		echo "$sys_path = '$ds'"
 	done
 
 	echo "zram set disksizes: OK"
@@ -175,14 +193,14 @@ zram_set_memlimit()
 {
 	echo "set memory limit to zram device(s)"
 
-	local i=0
+	local i=$dev_start
 	for ds in $zram_mem_limits; do
 		local sys_path="/sys/block/zram${i}/mem_limit"
 		echo "$ds" >	$sys_path || \
 			echo "FAIL can't set '$ds' to $sys_path"
 
 		i=$(($i + 1))
-		echo "$sys_path = '$ds' ($i/$dev_num)"
+		echo "$sys_path = '$ds'"
 	done
 
 	echo "zram set memory limit: OK"
@@ -191,8 +209,8 @@ zram_set_memlimit()
 zram_makeswap()
 {
 	echo "make swap with zram device(s)"
-	local i=0
-	for i in $(seq 0 $(($dev_num - 1))); do
+	local i=$dev_start
+	for i in $(seq $dev_start $dev_end); do
 		mkswap /dev/zram$i > err.log 2>&1
 		if [ $? -ne 0 ]; then
 			cat err.log
@@ -215,7 +233,7 @@ zram_makeswap()
 zram_swapoff()
 {
 	local i=
-	for i in $(seq 0 $dev_makeswap); do
+	for i in $(seq $dev_start $dev_end); do
 		swapoff /dev/zram$i > err.log 2>&1
 		if [ $? -ne 0 ]; then
 			cat err.log
@@ -229,7 +247,7 @@ zram_swapoff()
 
 zram_makefs()
 {
-	local i=0
+	local i=$dev_start
 	for fs in $zram_filesystems; do
 		# if requested fs not supported default it to ext2
 		which mkfs.$fs > /dev/null 2>&1 || fs=ext2
@@ -248,7 +266,7 @@ zram_makefs()
 zram_mount()
 {
 	local i=0
-	for i in $(seq 0 $(($dev_num - 1))); do
+	for i in $(seq $dev_start $dev_end); do
 		echo "mount /dev/zram$i"
 		mkdir zram$i
 		mount /dev/zram$i zram$i > /dev/null || \
-- 
2.34.1

[PATCH 4.9 11/33] ax25: improve the incomplete fix to avoid UAF and NPD bugs

[Greg Kroah-Hartman]

From: Duoming Zhou <duoming@zju.edu.cn>

[ Upstream commit 4e0f718daf97d47cf7dec122da1be970f145c809 ]

The previous commit 1ade48d0c27d ("ax25: NPD bug when detaching
AX25 device") introduce lock_sock() into ax25_kill_by_device to
prevent NPD bug. But the concurrency NPD or UAF bug will occur,
when lock_sock() or release_sock() dereferences the ax25_cb->sock.

The NULL pointer dereference bug can be shown as below:

ax25_kill_by_device()        | ax25_release()
                             |   ax25_destroy_socket()
                             |     ax25_cb_del()
  ...                        |     ...
                             |     ax25->sk=NULL;
  lock_sock(s->sk); //(1)    |
  s->ax25_dev = NULL;        |     ...
  release_sock(s->sk); //(2) |
  ...                        |

The root cause is that the sock is set to null before dereference
site (1) or (2). Therefore, this patch extracts the ax25_cb->sock
in advance, and uses ax25_list_lock to protect it, which can synchronize
with ax25_cb_del() and ensure the value of sock is not null before
dereference sites.

The concurrency UAF bug can be shown as below:

ax25_kill_by_device()        | ax25_release()
                             |   ax25_destroy_socket()
  ...                        |   ...
                             |   sock_put(sk); //FREE
  lock_sock(s->sk); //(1)    |
  s->ax25_dev = NULL;        |   ...
  release_sock(s->sk); //(2) |
  ...                        |

The root cause is that the sock is released before dereference
site (1) or (2). Therefore, this patch uses sock_hold() to increase
the refcount of sock and uses ax25_list_lock to protect it, which
can synchronize with ax25_cb_del() in ax25_destroy_socket() and
ensure the sock wil not be released before dereference sites.

Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ax25/af_ax25.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/net/ax25/af_ax25.c b/net/ax25/af_ax25.c
index f4c8567e91b38..c4ef1be59cb19 100644
--- a/net/ax25/af_ax25.c
+++ b/net/ax25/af_ax25.c
@@ -80,6 +80,7 @@ static void ax25_kill_by_device(struct net_device *dev)
 {
 	ax25_dev *ax25_dev;
 	ax25_cb *s;
+	struct sock *sk;
 
 	if ((ax25_dev = ax25_dev_ax25dev(dev)) == NULL)
 		return;
@@ -88,13 +89,15 @@ static void ax25_kill_by_device(struct net_device *dev)
 again:
 	ax25_for_each(s, &ax25_list) {
 		if (s->ax25_dev == ax25_dev) {
+			sk = s->sk;
+			sock_hold(sk);
 			spin_unlock_bh(&ax25_list_lock);
-			lock_sock(s->sk);
+			lock_sock(sk);
 			s->ax25_dev = NULL;
-			release_sock(s->sk);
+			release_sock(sk);
 			ax25_disconnect(s, ENETUNREACH);
 			spin_lock_bh(&ax25_list_lock);
-
+			sock_put(sk);
 			/* The entry could have been deleted from the
 			 * list meanwhile and thus the next pointer is
 			 * no longer valid.  Play it safe and restart
-- 
2.34.1

[PATCH 4.9 12/33] vfs: make freeze_super abort when sync_filesystem returns error

[Greg Kroah-Hartman]

From: Darrick J. Wong <djwong@kernel.org>

[ Upstream commit 2719c7160dcfaae1f73a1c0c210ad3281c19022e ]

If we fail to synchronize the filesystem while preparing to freeze the
fs, abort the freeze.

Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/super.c | 19 ++++++++++++-------
 1 file changed, 12 insertions(+), 7 deletions(-)

diff --git a/fs/super.c b/fs/super.c
index 377c439477b74..20e9cd2b6488d 100644
--- a/fs/super.c
+++ b/fs/super.c
@@ -1298,11 +1298,9 @@ static void lockdep_sb_freeze_acquire(struct super_block *sb)
 		percpu_rwsem_acquire(sb->s_writers.rw_sem + level, 0, _THIS_IP_);
 }
 
-static void sb_freeze_unlock(struct super_block *sb)
+static void sb_freeze_unlock(struct super_block *sb, int level)
 {
-	int level;
-
-	for (level = SB_FREEZE_LEVELS - 1; level >= 0; level--)
+	for (level--; level >= 0; level--)
 		percpu_up_write(sb->s_writers.rw_sem + level);
 }
 
@@ -1373,7 +1371,14 @@ int freeze_super(struct super_block *sb)
 	sb_wait_write(sb, SB_FREEZE_PAGEFAULT);
 
 	/* All writers are done so after syncing there won't be dirty data */
-	sync_filesystem(sb);
+	ret = sync_filesystem(sb);
+	if (ret) {
+		sb->s_writers.frozen = SB_UNFROZEN;
+		sb_freeze_unlock(sb, SB_FREEZE_PAGEFAULT);
+		wake_up(&sb->s_writers.wait_unfrozen);
+		deactivate_locked_super(sb);
+		return ret;
+	}
 
 	/* Now wait for internal filesystem counter */
 	sb->s_writers.frozen = SB_FREEZE_FS;
@@ -1385,7 +1390,7 @@ int freeze_super(struct super_block *sb)
 			printk(KERN_ERR
 				"VFS:Filesystem freeze failed\n");
 			sb->s_writers.frozen = SB_UNFROZEN;
-			sb_freeze_unlock(sb);
+			sb_freeze_unlock(sb, SB_FREEZE_FS);
 			wake_up(&sb->s_writers.wait_unfrozen);
 			deactivate_locked_super(sb);
 			return ret;
@@ -1437,7 +1442,7 @@ int thaw_super(struct super_block *sb)
 	}
 
 	sb->s_writers.frozen = SB_UNFROZEN;
-	sb_freeze_unlock(sb);
+	sb_freeze_unlock(sb, SB_FREEZE_FS);
 out:
 	wake_up(&sb->s_writers.wait_unfrozen);
 	deactivate_locked_super(sb);
-- 
2.34.1

[PATCH 4.9 13/33] quota: make dquot_quota_sync return errors from ->sync_fs

[Greg Kroah-Hartman]

From: Darrick J. Wong <djwong@kernel.org>

[ Upstream commit dd5532a4994bfda0386eb2286ec00758cee08444 ]

Strangely, dquot_quota_sync ignores the return code from the ->sync_fs
call, which means that quotacalls like Q_SYNC never see the error.  This
doesn't seem right, so fix that.

Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/quota/dquot.c |   11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

--- a/fs/quota/dquot.c
+++ b/fs/quota/dquot.c
@@ -676,9 +676,14 @@ int dquot_quota_sync(struct super_block
 	/* This is not very clever (and fast) but currently I don't know about
 	 * any other simple way of getting quota data to disk and we must get
 	 * them there for userspace to be visible... */
-	if (sb->s_op->sync_fs)
-		sb->s_op->sync_fs(sb, 1);
-	sync_blockdev(sb->s_bdev);
+	if (sb->s_op->sync_fs) {
+		ret = sb->s_op->sync_fs(sb, 1);
+		if (ret)
+			return ret;
+	}
+	ret = sync_blockdev(sb->s_bdev);
+	if (ret)
+		return ret;
 
 	/*
 	 * Now when everything is written we can discard the pagecache so

[PATCH 4.9 14/33] drm/radeon: Fix backlight control on iMac 12,1

[Greg Kroah-Hartman]

From: Nicholas Bishop <nicholasbishop@google.com>

commit 364438fd629f7611a84c8e6d7de91659300f1502 upstream.

The iMac 12,1 does not use the gmux driver for backlight, so the radeon
backlight device is needed to set the brightness.

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1838
Signed-off-by: Nicholas Bishop <nicholasbishop@google.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/radeon/atombios_encoders.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/gpu/drm/radeon/atombios_encoders.c
+++ b/drivers/gpu/drm/radeon/atombios_encoders.c
@@ -192,7 +192,8 @@ void radeon_atom_backlight_init(struct r
 	 * so don't register a backlight device
 	 */
 	if ((rdev->pdev->subsystem_vendor == PCI_VENDOR_ID_APPLE) &&
-	    (rdev->pdev->device == 0x6741))
+	    (rdev->pdev->device == 0x6741) &&
+	    !dmi_match(DMI_PRODUCT_NAME, "iMac12,1"))
 		return;
 
 	if (!radeon_encoder->enc_priv)

[PATCH 4.9 15/33] xfrm: Dont accidentally set RTO_ONLINK in decode_session4()

[Greg Kroah-Hartman]

From: Guillaume Nault <gnault@redhat.com>

commit 23e7b1bfed61e301853b5e35472820d919498278 upstream.

Similar to commit 94e2238969e8 ("xfrm4: strip ECN bits from tos field"),
clear the ECN bits from iph->tos when setting ->flowi4_tos.
This ensures that the last bit of ->flowi4_tos is cleared, so
ip_route_output_key_hash() isn't going to restrict the scope of the
route lookup.

Use ~INET_ECN_MASK instead of IPTOS_RT_MASK, because we have no reason
to clear the high order bits.

Found by code inspection, compile tested only.

Fixes: 4da3089f2b58 ("[IPSEC]: Use TOS when doing tunnel lookups")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[sudip: manually backport to previous location]
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/xfrm4_policy.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/net/ipv4/xfrm4_policy.c
+++ b/net/ipv4/xfrm4_policy.c
@@ -16,6 +16,7 @@
 #include <net/xfrm.h>
 #include <net/ip.h>
 #include <net/l3mdev.h>
+#include <net/inet_ecn.h>
 
 static struct xfrm_policy_afinfo xfrm4_policy_afinfo;
 
@@ -123,7 +124,7 @@ _decode_session4(struct sk_buff *skb, st
 	fl4->flowi4_proto = iph->protocol;
 	fl4->daddr = reverse ? iph->saddr : iph->daddr;
 	fl4->saddr = reverse ? iph->daddr : iph->saddr;
-	fl4->flowi4_tos = iph->tos;
+	fl4->flowi4_tos = iph->tos & ~INET_ECN_MASK;
 
 	if (!ip_is_fragment(iph)) {
 		switch (iph->protocol) {

[PATCH 4.9 16/33] taskstats: Cleanup the use of task->exit_code

[Greg Kroah-Hartman]

From: "Eric W. Biederman" <ebiederm@xmission.com>

commit 1b5a42d9c85f0e731f01c8d1129001fd8531a8a0 upstream.

In the function bacct_add_task the code reading task->exit_code was
introduced in commit f3cef7a99469 ("[PATCH] csa: basic accounting over
taskstats"), and it is not entirely clear what the taskstats interface
is trying to return as only returning the exit_code of the first task
in a process doesn't make a lot of sense.

As best as I can figure the intent is to return task->exit_code after
a task exits.  The field is returned with per task fields, so the
exit_code of the entire process is not wanted.  Only the value of the
first task is returned so this is not a useful way to get the per task
ptrace stop code.  The ordinary case of returning this value is
returning after a task exits, which also precludes use for getting
a ptrace value.

It is common to for the first task of a process to also be the last
task of a process so this field may have done something reasonable by
accident in testing.

Make ac_exitcode a reliable per task value by always returning it for
every exited task.

Setting ac_exitcode in a sensible mannter makes it possible to continue
to provide this value going forward.

Cc: Balbir Singh <bsingharora@gmail.com>
Fixes: f3cef7a99469 ("[PATCH] csa: basic accounting over taskstats")
Link: https://lkml.kernel.org/r/20220103213312.9144-5-ebiederm@xmission.com
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
[sudip: adjust context]
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/tsacct.c |    7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

--- a/kernel/tsacct.c
+++ b/kernel/tsacct.c
@@ -44,11 +44,10 @@ void bacct_add_tsk(struct user_namespace
 	/* Convert to seconds for btime */
 	do_div(delta, USEC_PER_SEC);
 	stats->ac_btime = get_seconds() - delta;
-	if (thread_group_leader(tsk)) {
+	if (tsk->flags & PF_EXITING)
 		stats->ac_exitcode = tsk->exit_code;
-		if (tsk->flags & PF_FORKNOEXEC)
-			stats->ac_flag |= AFORK;
-	}
+	if (thread_group_leader(tsk) && (tsk->flags & PF_FORKNOEXEC))
+		stats->ac_flag |= AFORK;
 	if (tsk->flags & PF_SUPERPRIV)
 		stats->ac_flag |= ASU;
 	if (tsk->flags & PF_DUMPCORE)

[PATCH 4.9 17/33] vsock: correct removal of socket from the list

[Greg Kroah-Hartman]

From: Sunil Muthuswamy <sunilmut@microsoft.com>

commit d5afa82c977ea06f7119058fa0eb8519ea501031 upstream.

The current vsock code for removal of socket from the list is both
subject to race and inefficient. It takes the lock, checks whether
the socket is in the list, drops the lock and if the socket was on the
list, deletes it from the list. This is subject to race because as soon
as the lock is dropped once it is checked for presence, that condition
cannot be relied upon for any decision. It is also inefficient because
if the socket is present in the list, it takes the lock twice.

Signed-off-by: Sunil Muthuswamy <sunilmut@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/vmw_vsock/af_vsock.c |   38 +++++++-------------------------------
 1 file changed, 7 insertions(+), 31 deletions(-)

--- a/net/vmw_vsock/af_vsock.c
+++ b/net/vmw_vsock/af_vsock.c
@@ -279,7 +279,8 @@ EXPORT_SYMBOL_GPL(vsock_insert_connected
 void vsock_remove_bound(struct vsock_sock *vsk)
 {
 	spin_lock_bh(&vsock_table_lock);
-	__vsock_remove_bound(vsk);
+	if (__vsock_in_bound_table(vsk))
+		__vsock_remove_bound(vsk);
 	spin_unlock_bh(&vsock_table_lock);
 }
 EXPORT_SYMBOL_GPL(vsock_remove_bound);
@@ -287,7 +288,8 @@ EXPORT_SYMBOL_GPL(vsock_remove_bound);
 void vsock_remove_connected(struct vsock_sock *vsk)
 {
 	spin_lock_bh(&vsock_table_lock);
-	__vsock_remove_connected(vsk);
+	if (__vsock_in_connected_table(vsk))
+		__vsock_remove_connected(vsk);
 	spin_unlock_bh(&vsock_table_lock);
 }
 EXPORT_SYMBOL_GPL(vsock_remove_connected);
@@ -323,35 +325,10 @@ struct sock *vsock_find_connected_socket
 }
 EXPORT_SYMBOL_GPL(vsock_find_connected_socket);
 
-static bool vsock_in_bound_table(struct vsock_sock *vsk)
-{
-	bool ret;
-
-	spin_lock_bh(&vsock_table_lock);
-	ret = __vsock_in_bound_table(vsk);
-	spin_unlock_bh(&vsock_table_lock);
-
-	return ret;
-}
-
-static bool vsock_in_connected_table(struct vsock_sock *vsk)
-{
-	bool ret;
-
-	spin_lock_bh(&vsock_table_lock);
-	ret = __vsock_in_connected_table(vsk);
-	spin_unlock_bh(&vsock_table_lock);
-
-	return ret;
-}
-
 void vsock_remove_sock(struct vsock_sock *vsk)
 {
-	if (vsock_in_bound_table(vsk))
-		vsock_remove_bound(vsk);
-
-	if (vsock_in_connected_table(vsk))
-		vsock_remove_connected(vsk);
+	vsock_remove_bound(vsk);
+	vsock_remove_connected(vsk);
 }
 EXPORT_SYMBOL_GPL(vsock_remove_sock);
 
@@ -482,8 +459,7 @@ static void vsock_pending_work(struct wo
 	 * incoming packets can't find this socket, and to reduce the reference
 	 * count.
 	 */
-	if (vsock_in_connected_table(vsk))
-		vsock_remove_connected(vsk);
+	vsock_remove_connected(vsk);
 
 	sk->sk_state = SS_FREE;
 

[PATCH 4.9 18/33] vsock: remove vsock from connected table when connect is interrupted by a signal

[Greg Kroah-Hartman]

From: Seth Forshee <sforshee@digitalocean.com>

commit b9208492fcaecff8f43915529ae34b3bcb03877c upstream.

vsock_connect() expects that the socket could already be in the
TCP_ESTABLISHED state when the connecting task wakes up with a signal
pending. If this happens the socket will be in the connected table, and
it is not removed when the socket state is reset. In this situation it's
common for the process to retry connect(), and if the connection is
successful the socket will be added to the connected table a second
time, corrupting the list.

Prevent this by calling vsock_remove_connected() if a signal is received
while waiting for a connection. This is harmless if the socket is not in
the connected table, and if it is in the table then removing it will
prevent list corruption from a double add.

Note for backporting: this patch requires d5afa82c977e ("vsock: correct
removal of socket from the list"), which is in all current stable trees
except 4.9.y.

Fixes: d021c344051a ("VSOCK: Introduce VM Sockets")
Signed-off-by: Seth Forshee <sforshee@digitalocean.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20220217141312.2297547-1-sforshee@digitalocean.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/vmw_vsock/af_vsock.c |    1 +
 1 file changed, 1 insertion(+)

--- a/net/vmw_vsock/af_vsock.c
+++ b/net/vmw_vsock/af_vsock.c
@@ -1220,6 +1220,7 @@ static int vsock_stream_connect(struct s
 			sk->sk_state = SS_UNCONNECTED;
 			sock->state = SS_UNCONNECTED;
 			vsock_transport_cancel_pkt(vsk);
+			vsock_remove_connected(vsk);
 			goto out_wait;
 		} else if (timeout == 0) {
 			err = -ETIMEDOUT;

[PATCH 4.9 19/33] iwlwifi: pcie: fix locking when "HW not ready"

[Greg Kroah-Hartman]

From: Johannes Berg <johannes.berg@intel.com>

commit e9848aed147708a06193b40d78493b0ef6abccf2 upstream.

If we run into this error path, we shouldn't unlock the mutex
since it's not locked since. Fix this.

Fixes: a6bd005fe92d ("iwlwifi: pcie: fix RF-Kill vs. firmware load race")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/iwlwifi.20220128142706.5d16821d1433.Id259699ddf9806459856d6aefbdbe54477aecffd@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/wireless/intel/iwlwifi/pcie/trans.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

--- a/drivers/net/wireless/intel/iwlwifi/pcie/trans.c
+++ b/drivers/net/wireless/intel/iwlwifi/pcie/trans.c
@@ -1183,8 +1183,7 @@ static int iwl_trans_pcie_start_fw(struc
 	/* This may fail if AMT took ownership of the device */
 	if (iwl_pcie_prepare_card_hw(trans)) {
 		IWL_WARN(trans, "Exit HW not ready\n");
-		ret = -EIO;
-		goto out;
+		return -EIO;
 	}
 
 	iwl_enable_rfkill_int(trans);

[PATCH 4.9 20/33] drop_monitor: fix data-race in dropmon_net_event / trace_napi_poll_hit

[Greg Kroah-Hartman]

From: Eric Dumazet <edumazet@google.com>

commit dcd54265c8bc14bd023815e36e2d5f9d66ee1fee upstream.

trace_napi_poll_hit() is reading stat->dev while another thread can write
on it from dropmon_net_event()

Use READ_ONCE()/WRITE_ONCE() here, RCU rules are properly enforced already,
we only have to take care of load/store tearing.

BUG: KCSAN: data-race in dropmon_net_event / trace_napi_poll_hit

write to 0xffff88816f3ab9c0 of 8 bytes by task 20260 on cpu 1:
 dropmon_net_event+0xb8/0x2b0 net/core/drop_monitor.c:1579
 notifier_call_chain kernel/notifier.c:84 [inline]
 raw_notifier_call_chain+0x53/0xb0 kernel/notifier.c:392
 call_netdevice_notifiers_info net/core/dev.c:1919 [inline]
 call_netdevice_notifiers_extack net/core/dev.c:1931 [inline]
 call_netdevice_notifiers net/core/dev.c:1945 [inline]
 unregister_netdevice_many+0x867/0xfb0 net/core/dev.c:10415
 ip_tunnel_delete_nets+0x24a/0x280 net/ipv4/ip_tunnel.c:1123
 vti_exit_batch_net+0x2a/0x30 net/ipv4/ip_vti.c:515
 ops_exit_list net/core/net_namespace.c:173 [inline]
 cleanup_net+0x4dc/0x8d0 net/core/net_namespace.c:597
 process_one_work+0x3f6/0x960 kernel/workqueue.c:2307
 worker_thread+0x616/0xa70 kernel/workqueue.c:2454
 kthread+0x1bf/0x1e0 kernel/kthread.c:377
 ret_from_fork+0x1f/0x30

read to 0xffff88816f3ab9c0 of 8 bytes by interrupt on cpu 0:
 trace_napi_poll_hit+0x89/0x1c0 net/core/drop_monitor.c:292
 trace_napi_poll include/trace/events/napi.h:14 [inline]
 __napi_poll+0x36b/0x3f0 net/core/dev.c:6366
 napi_poll net/core/dev.c:6432 [inline]
 net_rx_action+0x29e/0x650 net/core/dev.c:6519
 __do_softirq+0x158/0x2de kernel/softirq.c:558
 do_softirq+0xb1/0xf0 kernel/softirq.c:459
 __local_bh_enable_ip+0x68/0x70 kernel/softirq.c:383
 __raw_spin_unlock_bh include/linux/spinlock_api_smp.h:167 [inline]
 _raw_spin_unlock_bh+0x33/0x40 kernel/locking/spinlock.c:210
 spin_unlock_bh include/linux/spinlock.h:394 [inline]
 ptr_ring_consume_bh include/linux/ptr_ring.h:367 [inline]
 wg_packet_decrypt_worker+0x73c/0x780 drivers/net/wireguard/receive.c:506
 process_one_work+0x3f6/0x960 kernel/workqueue.c:2307
 worker_thread+0x616/0xa70 kernel/workqueue.c:2454
 kthread+0x1bf/0x1e0 kernel/kthread.c:377
 ret_from_fork+0x1f/0x30

value changed: 0xffff88815883e000 -> 0x0000000000000000

Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 26435 Comm: kworker/0:1 Not tainted 5.17.0-rc1-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: wg-crypt-wg2 wg_packet_decrypt_worker

Fixes: 4ea7e38696c7 ("dropmon: add ability to detect when hardware dropsrxpackets")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/core/drop_monitor.c |   11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

--- a/net/core/drop_monitor.c
+++ b/net/core/drop_monitor.c
@@ -224,13 +224,17 @@ static void trace_napi_poll_hit(void *ig
 
 	rcu_read_lock();
 	list_for_each_entry_rcu(new_stat, &hw_stats_list, list) {
+		struct net_device *dev;
+
 		/*
 		 * only add a note to our monitor buffer if:
 		 * 1) this is the dev we received on
 		 * 2) its after the last_rx delta
 		 * 3) our rx_dropped count has gone up
 		 */
-		if ((new_stat->dev == napi->dev)  &&
+		/* Paired with WRITE_ONCE() in dropmon_net_event() */
+		dev = READ_ONCE(new_stat->dev);
+		if ((dev == napi->dev)  &&
 		    (time_after(jiffies, new_stat->last_rx + dm_hw_check_delta)) &&
 		    (napi->dev->stats.rx_dropped != new_stat->last_drop_val)) {
 			trace_drop_common(NULL, NULL);
@@ -345,7 +349,10 @@ static int dropmon_net_event(struct noti
 		mutex_lock(&trace_state_mutex);
 		list_for_each_entry_safe(new_stat, tmp, &hw_stats_list, list) {
 			if (new_stat->dev == dev) {
-				new_stat->dev = NULL;
+
+				/* Paired with READ_ONCE() in trace_napi_poll_hit() */
+				WRITE_ONCE(new_stat->dev, NULL);
+
 				if (trace_state == TRACE_OFF) {
 					list_del_rcu(&new_stat->list);
 					kfree_rcu(new_stat, rcu);

[PATCH 4.9 21/33] libsubcmd: Fix use-after-free for realloc(..., 0)

[Greg Kroah-Hartman]

From: Kees Cook <keescook@chromium.org>

commit 52a9dab6d892763b2a8334a568bd4e2c1a6fde66 upstream.

GCC 12 correctly reports a potential use-after-free condition in the
xrealloc helper. Fix the warning by avoiding an implicit "free(ptr)"
when size == 0:

In file included from help.c:12:
In function 'xrealloc',
    inlined from 'add_cmdname' at help.c:24:2: subcmd-util.h:56:23: error: pointer may be used after 'realloc' [-Werror=use-after-free]
   56 |                 ret = realloc(ptr, size);
      |                       ^~~~~~~~~~~~~~~~~~
subcmd-util.h:52:21: note: call to 'realloc' here
   52 |         void *ret = realloc(ptr, size);
      |                     ^~~~~~~~~~~~~~~~~~
subcmd-util.h:58:31: error: pointer may be used after 'realloc' [-Werror=use-after-free]
   58 |                         ret = realloc(ptr, 1);
      |                               ^~~~~~~~~~~~~~~
subcmd-util.h:52:21: note: call to 'realloc' here
   52 |         void *ret = realloc(ptr, size);
      |                     ^~~~~~~~~~~~~~~~~~

Fixes: 2f4ce5ec1d447beb ("perf tools: Finalize subcmd independence")
Reported-by: Valdis Klētnieks <valdis.kletnieks@vt.edu>
Signed-off-by: Kees Kook <keescook@chromium.org>
Tested-by: Valdis Klētnieks <valdis.kletnieks@vt.edu>
Tested-by: Justin M. Forbes <jforbes@fedoraproject.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: linux-hardening@vger.kernel.org
Cc: Valdis Klētnieks <valdis.kletnieks@vt.edu>
Link: http://lore.kernel.org/lkml/20220213182443.4037039-1-keescook@chromium.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 tools/lib/subcmd/subcmd-util.h |   11 ++---------
 1 file changed, 2 insertions(+), 9 deletions(-)

--- a/tools/lib/subcmd/subcmd-util.h
+++ b/tools/lib/subcmd/subcmd-util.h
@@ -49,15 +49,8 @@ static NORETURN inline void die(const ch
 static inline void *xrealloc(void *ptr, size_t size)
 {
 	void *ret = realloc(ptr, size);
-	if (!ret && !size)
-		ret = realloc(ptr, 1);
-	if (!ret) {
-		ret = realloc(ptr, size);
-		if (!ret && !size)
-			ret = realloc(ptr, 1);
-		if (!ret)
-			die("Out of memory, realloc failed");
-	}
+	if (!ret)
+		die("Out of memory, realloc failed");
 	return ret;
 }
 

[PATCH 4.9 22/33] ALSA: hda: Fix regression on forced probe mask option

[Greg Kroah-Hartman]

From: Takashi Iwai <tiwai@suse.de>

commit 6317f7449348a897483a2b4841f7a9190745c81b upstream.

The forced probe mask via probe_mask 0x100 bit doesn't work any longer
as expected since the bus init code was moved and it's clearing the
codec_mask value that was set beforehand.  This patch fixes the
long-time regression by moving the check_probe_mask() call.

Fixes: a41d122449be ("ALSA: hda - Embed bus into controller object")
Reported-by: dmummenschanz@web.de
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/trinity-f018660b-95c9-442b-a2a8-c92a56eb07ed-1644345967148@3c-app-webde-bap22
Link: https://lore.kernel.org/r/20220214100020.8870-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/pci/hda/hda_intel.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -1609,8 +1609,6 @@ static int azx_create(struct snd_card *c
 
 	assign_position_fix(chip, check_position_fix(chip, position_fix[dev]));
 
-	check_probe_mask(chip, dev);
-
 	chip->single_cmd = single_cmd;
 	azx_check_snoop_available(chip);
 
@@ -1631,6 +1629,8 @@ static int azx_create(struct snd_card *c
 		chip->bus.needs_damn_long_delay = 1;
 	}
 
+	check_probe_mask(chip, dev);
+
 	err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops);
 	if (err < 0) {
 		dev_err(card->dev, "Error creating device [card]!\n");

[PATCH 4.9 23/33] ALSA: hda: Fix missing codec probe on Shenker Dock 15

[Greg Kroah-Hartman]

From: Takashi Iwai <tiwai@suse.de>

commit dd8e5b161d7fb9cefa1f1d6e35a39b9e1563c8d3 upstream.

By some unknown reason, BIOS on Shenker Dock 15 doesn't set up the
codec mask properly for the onboard audio.  Let's set the forced codec
mask to enable the codec discovery.

Reported-by: dmummenschanz@web.de
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/trinity-f018660b-95c9-442b-a2a8-c92a56eb07ed-1644345967148@3c-app-webde-bap22
Link: https://lore.kernel.org/r/20220214100020.8870-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/pci/hda/hda_intel.c |    1 +
 1 file changed, 1 insertion(+)

--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -1424,6 +1424,7 @@ static struct snd_pci_quirk probe_mask_l
 	/* forced codec slots */
 	SND_PCI_QUIRK(0x1043, 0x1262, "ASUS W5Fm", 0x103),
 	SND_PCI_QUIRK(0x1046, 0x1262, "ASUS W5F", 0x103),
+	SND_PCI_QUIRK(0x1558, 0x0351, "Schenker Dock 15", 0x105),
 	/* WinFast VP200 H (Teradici) user reported broken communication */
 	SND_PCI_QUIRK(0x3a21, 0x040d, "WinFast VP200 H", 0x101),
 	{}

[PATCH 4.9 24/33] ASoC: ops: Fix stereo change notifications in snd_soc_put_volsw()

[Greg Kroah-Hartman]

From: Mark Brown <broonie@kernel.org>

commit 564778d7b1ea465f9487eedeece7527a033549c5 upstream.

When writing out a stereo control we discard the change notification from
the first channel, meaning that events are only generated based on changes
to the second channel. Ensure that we report a change if either channel
has changed.

Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220201155629.120510-2-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/soc/soc-ops.c |   14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

--- a/sound/soc/soc-ops.c
+++ b/sound/soc/soc-ops.c
@@ -319,7 +319,7 @@ int snd_soc_put_volsw(struct snd_kcontro
 	unsigned int sign_bit = mc->sign_bit;
 	unsigned int mask = (1 << fls(max)) - 1;
 	unsigned int invert = mc->invert;
-	int err;
+	int err, ret;
 	bool type_2r = false;
 	unsigned int val2 = 0;
 	unsigned int val, val_mask;
@@ -361,12 +361,18 @@ int snd_soc_put_volsw(struct snd_kcontro
 	err = snd_soc_component_update_bits(component, reg, val_mask, val);
 	if (err < 0)
 		return err;
+	ret = err;
 
-	if (type_2r)
+	if (type_2r) {
 		err = snd_soc_component_update_bits(component, reg2, val_mask,
-			val2);
+						    val2);
+		/* Don't discard any error code or drop change flag */
+		if (ret == 0 || err < 0) {
+			ret = err;
+		}
+	}
 
-	return err;
+	return ret;
 }
 EXPORT_SYMBOL_GPL(snd_soc_put_volsw);
 

[PATCH 4.9 25/33] ASoC: ops: Fix stereo change notifications in snd_soc_put_volsw_range()

[Greg Kroah-Hartman]

From: Mark Brown <broonie@kernel.org>

commit 650204ded3703b5817bd4b6a77fa47d333c4f902 upstream.

When writing out a stereo control we discard the change notification from
the first channel, meaning that events are only generated based on changes
to the second channel. Ensure that we report a change if either channel
has changed.

Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220201155629.120510-4-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/soc/soc-ops.c |   15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)

--- a/sound/soc/soc-ops.c
+++ b/sound/soc/soc-ops.c
@@ -528,7 +528,7 @@ int snd_soc_put_volsw_range(struct snd_k
 	unsigned int mask = (1 << fls(max)) - 1;
 	unsigned int invert = mc->invert;
 	unsigned int val, val_mask;
-	int ret;
+	int err, ret;
 
 	if (invert)
 		val = (max - ucontrol->value.integer.value[0]) & mask;
@@ -537,9 +537,10 @@ int snd_soc_put_volsw_range(struct snd_k
 	val_mask = mask << shift;
 	val = val << shift;
 
-	ret = snd_soc_component_update_bits(component, reg, val_mask, val);
-	if (ret < 0)
-		return ret;
+	err = snd_soc_component_update_bits(component, reg, val_mask, val);
+	if (err < 0)
+		return err;
+	ret = err;
 
 	if (snd_soc_volsw_is_stereo(mc)) {
 		if (invert)
@@ -549,8 +550,12 @@ int snd_soc_put_volsw_range(struct snd_k
 		val_mask = mask << shift;
 		val = val << shift;
 
-		ret = snd_soc_component_update_bits(component, rreg, val_mask,
+		err = snd_soc_component_update_bits(component, rreg, val_mask,
 			val);
+		/* Don't discard any error code or drop change flag */
+		if (ret == 0 || err < 0) {
+			ret = err;
+		}
 	}
 
 	return ret;

[PATCH 4.9 26/33] NFS: LOOKUP_DIRECTORY is also ok with symlinks

[Greg Kroah-Hartman]

From: Trond Myklebust <trond.myklebust@hammerspace.com>

commit e0caaf75d443e02e55e146fd75fe2efc8aed5540 upstream.

Commit ac795161c936 (NFSv4: Handle case where the lookup of a directory
fails) [1], part of Linux since 5.17-rc2, introduced a regression, where
a symbolic link on an NFS mount to a directory on another NFS does not
resolve(?) the first time it is accessed:

Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Fixes: ac795161c936 ("NFSv4: Handle case where the lookup of a directory fails")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Tested-by: Donald Buczek <buczek@molgen.mpg.de>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/nfs/dir.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/fs/nfs/dir.c
+++ b/fs/nfs/dir.c
@@ -1605,14 +1605,14 @@ no_open:
 	if (!res) {
 		inode = d_inode(dentry);
 		if ((lookup_flags & LOOKUP_DIRECTORY) && inode &&
-		    !S_ISDIR(inode->i_mode))
+		    !(S_ISDIR(inode->i_mode) || S_ISLNK(inode->i_mode)))
 			res = ERR_PTR(-ENOTDIR);
 		else if (inode && S_ISREG(inode->i_mode))
 			res = ERR_PTR(-EOPENSTALE);
 	} else if (!IS_ERR(res)) {
 		inode = d_inode(res);
 		if ((lookup_flags & LOOKUP_DIRECTORY) && inode &&
-		    !S_ISDIR(inode->i_mode)) {
+		    !(S_ISDIR(inode->i_mode) || S_ISLNK(inode->i_mode))) {
 			dput(res);
 			res = ERR_PTR(-ENOTDIR);
 		} else if (inode && S_ISREG(inode->i_mode)) {

[PATCH 4.9 27/33] EDAC: Fix calculation of returned address and next offset in edac_align_ptr()

[Greg Kroah-Hartman]

From: Eliav Farber <farbere@amazon.com>

commit f8efca92ae509c25e0a4bd5d0a86decea4f0c41e upstream.

Do alignment logic properly and use the "ptr" local variable for
calculating the remainder of the alignment.

This became an issue because struct edac_mc_layer has a size that is not
zero modulo eight, and the next offset that was prepared for the private
data was unaligned, causing an alignment exception.

The patch in Fixes: which broke this actually wanted to "what we
actually care about is the alignment of the actual pointer that's about
to be returned." But it didn't check that alignment.

Use the correct variable "ptr" for that.

  [ bp: Massage commit message. ]

Fixes: 8447c4d15e35 ("edac: Do alignment logic properly in edac_align_ptr()")
Signed-off-by: Eliav Farber <farbere@amazon.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220113100622.12783-2-farbere@amazon.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/edac/edac_mc.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/edac/edac_mc.c
+++ b/drivers/edac/edac_mc.c
@@ -199,7 +199,7 @@ void *edac_align_ptr(void **p, unsigned
 	else
 		return (char *)ptr;
 
-	r = (unsigned long)p % align;
+	r = (unsigned long)ptr % align;
 
 	if (r == 0)
 		return (char *)ptr;

[PATCH 4.9 28/33] i2c: brcmstb: fix support for DSL and CM variants

[Greg Kroah-Hartman]

From: Rafał Miłecki <rafal@milecki.pl>

commit 834cea3a252ed4847db076a769ad9efe06afe2d5 upstream.

DSL and CM (Cable Modem) support 8 B max transfer size and have a custom
DT binding for that reason. This driver was checking for a wrong
"compatible" however which resulted in an incorrect setup.

Fixes: e2e5a2c61837 ("i2c: brcmstb: Adding support for CM and DSL SoCs")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/i2c/busses/i2c-brcmstb.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/i2c/busses/i2c-brcmstb.c
+++ b/drivers/i2c/busses/i2c-brcmstb.c
@@ -645,7 +645,7 @@ static int brcmstb_i2c_probe(struct plat
 
 	/* set the data in/out register size for compatible SoCs */
 	if (of_device_is_compatible(dev->device->of_node,
-				    "brcmstb,brcmper-i2c"))
+				    "brcm,brcmper-i2c"))
 		dev->data_regsz = sizeof(u8);
 	else
 		dev->data_regsz = sizeof(u32);

[PATCH 4.9 29/33] KVM: x86/pmu: Use AMD64_RAW_EVENT_MASK for PERF_TYPE_RAW

[Greg Kroah-Hartman]

From: Jim Mattson <jmattson@google.com>

[ Upstream commit 710c476514313c74045c41c0571bb5178fd16e3d ]

AMD's event select is 3 nybbles, with the high nybble in bits 35:32 of
a PerfEvtSeln MSR. Don't mask off the high nybble when configuring a
RAW perf event.

Fixes: ca724305a2b0 ("KVM: x86/vPMU: Implement AMD vPMU code for KVM")
Signed-off-by: Jim Mattson <jmattson@google.com>
Message-Id: <20220203014813.2130559-2-jmattson@google.com>
Reviewed-by: David Dunn <daviddunn@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kvm/pmu.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/kvm/pmu.c b/arch/x86/kvm/pmu.c
index 0827ee7d0e9b6..f1aa0b932c547 100644
--- a/arch/x86/kvm/pmu.c
+++ b/arch/x86/kvm/pmu.c
@@ -164,7 +164,7 @@ void reprogram_gp_counter(struct kvm_pmc *pmc, u64 eventsel)
 	}
 
 	if (type == PERF_TYPE_RAW)
-		config = eventsel & X86_RAW_EVENT_MASK;
+		config = eventsel & AMD64_RAW_EVENT_MASK;
 
 	pmc_reprogram_counter(pmc, type, config,
 			      !(eventsel & ARCH_PERFMON_EVENTSEL_USR),
-- 
2.34.1

[PATCH 4.9 30/33] NFS: Do not report writeback errors in nfs_getattr()

[Greg Kroah-Hartman]

From: Trond Myklebust <trond.myklebust@hammerspace.com>

[ Upstream commit d19e0183a88306acda07f4a01fedeeffe2a2a06b ]

The result of the writeback, whether it is an ENOSPC or an EIO, or
anything else, does not inhibit the NFS client from reporting the
correct file timestamps.

Fixes: 79566ef018f5 ("NFS: Getattr doesn't require data sync semantics")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/nfs/inode.c | 7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)

diff --git a/fs/nfs/inode.c b/fs/nfs/inode.c
index 7a94f5a5f8c8c..3f93b659c849a 100644
--- a/fs/nfs/inode.c
+++ b/fs/nfs/inode.c
@@ -661,11 +661,8 @@ int nfs_getattr(struct vfsmount *mnt, struct dentry *dentry, struct kstat *stat)
 
 	trace_nfs_getattr_enter(inode);
 	/* Flush out writes to the server in order to update c/mtime.  */
-	if (S_ISREG(inode->i_mode)) {
-		err = filemap_write_and_wait(inode->i_mapping);
-		if (err)
-			goto out;
-	}
+	if (S_ISREG(inode->i_mode))
+		filemap_write_and_wait(inode->i_mapping);
 
 	/*
 	 * We may force a getattr if the user cares about atime.
-- 
2.34.1

[PATCH 4.9 31/33] ata: libata-core: Disable TRIM on M88V29

[Greg Kroah-Hartman]

From: Zoltán Böszörményi <zboszor@gmail.com>

[ Upstream commit c8ea23d5fa59f28302d4e3370c75d9c308e64410 ]

This device is a CF card, or possibly an SSD in CF form factor.
It supports NCQ and high speed DMA.

While it also advertises TRIM support, I/O errors are reported
when the discard mount option fstrim is used. TRIM also fails
when disabling NCQ and not just as an NCQ command.

TRIM must be disabled for this device.

Signed-off-by: Zoltán Böszörményi <zboszor@gmail.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/ata/libata-core.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index a92cbe1aa72a2..35db918a1de56 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -4486,6 +4486,7 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
 
 	/* devices that don't properly handle TRIM commands */
 	{ "SuperSSpeed S238*",		NULL,	ATA_HORKAGE_NOTRIM, },
+	{ "M88V29*",			NULL,	ATA_HORKAGE_NOTRIM, },
 
 	/*
 	 * As defined, the DRAT (Deterministic Read After Trim) and RZAT
-- 
2.34.1

[PATCH 4.9 32/33] tracing: Fix tp_printk option related with tp_printk_stop_on_boot

[Greg Kroah-Hartman]

From: JaeSang Yoo <js.yoo.5b@gmail.com>

[ Upstream commit 3203ce39ac0b2a57a84382ec184c7d4a0bede175 ]

The kernel parameter "tp_printk_stop_on_boot" starts with "tp_printk" which is
the same as another kernel parameter "tp_printk". If "tp_printk" setup is
called before the "tp_printk_stop_on_boot", it will override the latter
and keep it from being set.

This is similar to other kernel parameter issues, such as:
  Commit 745a600cf1a6 ("um: console: Ignore console= option")
or init/do_mounts.c:45 (setup function of "ro" kernel param)

Fix it by checking for a "_" right after the "tp_printk" and if that
exists do not process the parameter.

Link: https://lkml.kernel.org/r/20220208195421.969326-1-jsyoo5b@gmail.com

Signed-off-by: JaeSang Yoo <jsyoo5b@gmail.com>
[ Fixed up change log and added space after if condition ]
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/trace/trace.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c
index 01c646a1d9e76..12bee7043be6f 100644
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -228,6 +228,10 @@ __setup("trace_clock=", set_trace_boot_clock);
 
 static int __init set_tracepoint_printk(char *str)
 {
+	/* Ignore the "tp_printk_stop_on_boot" param */
+	if (*str == '_')
+		return 0;
+
 	if ((strcmp(str, "=0") != 0 && strcmp(str, "=off") != 0))
 		tracepoint_printk = 1;
 	return 1;
-- 
2.34.1

[PATCH 4.9 33/33] net: usb: qmi_wwan: Add support for Dell DW5829e

[Greg Kroah-Hartman]

From: Slark Xiao <slark_xiao@163.com>

[ Upstream commit 8ecbb179286cbc91810c16caeb3396e06305cd0c ]

Dell DW5829e same as DW5821e except the CAT level.
DW5821e supports CAT16 but DW5829e supports CAT9.
Also, DW5829e includes normal and eSIM type.
Please see below test evidence:

T:  Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  5 Spd=5000 MxCh= 0
D:  Ver= 3.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs=  1
P:  Vendor=413c ProdID=81e6 Rev=03.18
S:  Manufacturer=Dell Inc.
S:  Product=DW5829e Snapdragon X20 LTE
S:  SerialNumber=0123456789ABCDEF
C:  #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA
I:  If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
I:  If#=0x1 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=00 Prot=00 Driver=usbhid
I:  If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option

T:  Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  7 Spd=5000 MxCh= 0
D:  Ver= 3.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs=  1
P:  Vendor=413c ProdID=81e4 Rev=03.18
S:  Manufacturer=Dell Inc.
S:  Product=DW5829e-eSIM Snapdragon X20 LTE
S:  SerialNumber=0123456789ABCDEF
C:  #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA
I:  If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
I:  If#=0x1 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=00 Prot=00 Driver=usbhid
I:  If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option

Signed-off-by: Slark Xiao <slark_xiao@163.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Link: https://lore.kernel.org/r/20220209024717.8564-1-slark_xiao@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/qmi_wwan.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c
index a8c960152a357..003c53a5bb336 100644
--- a/drivers/net/usb/qmi_wwan.c
+++ b/drivers/net/usb/qmi_wwan.c
@@ -964,6 +964,8 @@ static const struct usb_device_id products[] = {
 	{QMI_FIXED_INTF(0x413c, 0x81d7, 0)},	/* Dell Wireless 5821e */
 	{QMI_FIXED_INTF(0x413c, 0x81d7, 1)},	/* Dell Wireless 5821e preproduction config */
 	{QMI_FIXED_INTF(0x413c, 0x81e0, 0)},	/* Dell Wireless 5821e with eSIM support*/
+	{QMI_FIXED_INTF(0x413c, 0x81e4, 0)},	/* Dell Wireless 5829e with eSIM support*/
+	{QMI_FIXED_INTF(0x413c, 0x81e6, 0)},	/* Dell Wireless 5829e */
 	{QMI_FIXED_INTF(0x03f0, 0x4e1d, 8)},	/* HP lt4111 LTE/EV-DO/HSPA+ Gobi 4G Module */
 	{QMI_FIXED_INTF(0x03f0, 0x9d1d, 1)},	/* HP lt4120 Snapdragon X5 LTE */
 	{QMI_FIXED_INTF(0x22de, 0x9061, 3)},	/* WeTelecom WPD-600N */
-- 
2.34.1

Re: [PATCH 4.9 00/33] 4.9.303-rc1 review

[Slade Watkins]

On Mon, Feb 21, 2022, at 3:48 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.9.303 release.
> There are 33 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 23 Feb 2022 08:48:58 +0000.
> Anything received after that time might be too late.

4.4.303-rc1 compiled and booted with no errors or regressions on my x86_64 test system.

Tested-by: Slade Watkins <slade@sladewatkins.com>

Cheers, 
Slade

Re: [PATCH 4.9 00/33] 4.9.303-rc1 review

[Guenter Roeck]

On Mon, Feb 21, 2022 at 09:48:53AM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.9.303 release.
> There are 33 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 23 Feb 2022 08:48:58 +0000.
> Anything received after that time might be too late.
> 

Build results:
	total: 163 pass: 163 fail: 0
Qemu test results:
	total: 397 pass: 397 fail: 0

Tested-by: Guenter Roeck <linux@roeck-us.net>

Guenter

Re: [PATCH 4.9 00/33] 4.9.303-rc1 review

[Shuah Khan]

On 2/21/22 1:48 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.9.303 release.
> There are 33 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 23 Feb 2022 08:48:58 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.303-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

Tested-by: Shuah Khan <skhan@linuxfoundation.org>

thanks,
-- Shuah

Re: [PATCH 4.9 00/33] 4.9.303-rc1 review

[Florian Fainelli]

On 2/21/2022 12:48 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.9.303 release.
> There are 33 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 23 Feb 2022 08:48:58 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.303-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

On ARCH_BRCMSTB using 32-bit and 64-bit ARM kernels:

Tested-by: Florian Fainelli <f.fainelli@gmail.com>
-- 
Florian

Re: [PATCH 4.9 00/33] 4.9.303-rc1 review

[Naresh Kamboju]

On Mon, 21 Feb 2022 at 14:22, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 4.9.303 release.
> There are 33 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 23 Feb 2022 08:48:58 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.303-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>

## Build
* kernel: 4.4.302
* git: https://gitlab.com/Linaro/lkft/mirrors/stable/linux-stable-rc
* git branch: linux-4.4.y
* git commit: a09b2d8f61ea0e9ae735c400399b97966a9418d6
* git describe: v4.4.302
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-4.4.y/build/v4.4.302

## Test Regressions (compared to v4.4.299-114-g37c6a274092f)
No test regressions found.

## Metric Regressions (compared to v4.4.299-114-g37c6a274092f)
No metric regressions found.

## Test Fixes (compared to v4.4.299-114-g37c6a274092f)
No test fixes found.

## Metric Fixes (compared to v4.4.299-114-g37c6a274092f)
No metric fixes found.

## Test result summary
total: 56789, pass: 45632, fail: 280, skip: 9521, xfail: 1356

## Build Summary
* arm: 129 total, 129 passed, 0 failed
* arm64: 31 total, 31 passed, 0 failed
* i386: 18 total, 18 passed, 0 failed
* juno-r2: 1 total, 1 passed, 0 failed
* mips: 22 total, 22 passed, 0 failed
* sparc: 12 total, 12 passed, 0 failed
* x15: 1 total, 1 passed, 0 failed
* x86: 1 total, 1 passed, 0 failed
* x86_64: 30 total, 24 passed, 6 failed

## Test suites summary
* fwts
* kselftest-android
* kselftest-bpf
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-firmware
* kselftest-fpu
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kexec
* kselftest-kvm
* kselftest-lib
* kselftest-livepatch
* kselftest-membarrier
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-vm
* kselftest-x86
* kselftest-zram
* kvm-unit-tests
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-controllers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-open-posix-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-tracing-tests
* network-basic-tests
* packetdrill
* perf
* ssuite
* v4l2-compliance

--
Linaro LKFT
https://lkft.linaro.org

Re: [PATCH 4.9 00/33] 4.9.303-rc1 review

[Jon Hunter]

On Mon, 21 Feb 2022 09:48:53 +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.9.303 release.
> There are 33 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 23 Feb 2022 08:48:58 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.303-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

All tests passing for Tegra ...

Test results for stable-v4.9:
    8 builds:	8 pass, 0 fail
    16 boots:	16 pass, 0 fail
    32 tests:	32 pass, 0 fail

Linux version:	4.9.303-rc1-g6686f147d38f
Boards tested:	tegra124-jetson-tk1, tegra20-ventana,
                tegra210-p2371-2180, tegra30-cardhu-a04

Tested-by: Jon Hunter <jonathanh@nvidia.com>

Jon

Re: [PATCH 4.9 00/33] 4.9.303-rc1 review

[Naresh Kamboju]

On Mon, 21 Feb 2022 at 14:22, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 4.9.303 release.
> There are 33 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 23 Feb 2022 08:48:58 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.303-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>

NOTE:
This build warning found on all architectures,

> Trond Myklebust <trond.myklebust@hammerspace.com>
>     NFS: Do not report writeback errors in nfs_getattr()

fs/nfs/inode.c: In function 'nfs_getattr':
fs/nfs/inode.c:693:1: warning: label 'out' defined but not used [-Wunused-label]
  693 | out:
      | ^~~


## Build
* kernel: 4.9.303-rc1
* git: https://gitlab.com/Linaro/lkft/mirrors/stable/linux-stable-rc
* git branch: linux-4.9.y
* git commit: 6686f147d38ff2b3ffc43718976bb9ff43c5fcc5
* git describe: v4.9.302-34-g6686f147d38f
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-4.9.y/build/v4.9.302-34-g6686f147d38f

## Test Regressions (compared to v4.9.302-27-ge4a64678c410)
No test regressions found.

## Metric Regressions (compared to v4.9.302-27-ge4a64678c410)
Build warning found on all architectures
fs/nfs/inode.c: In function 'nfs_getattr':
fs/nfs/inode.c:693:1: warning: label 'out' defined but not used [-Wunused-label]
  693 | out:
      | ^~~

## Test Fixes (compared to v4.9.302-27-ge4a64678c410)
No test fixes found.

## Metric Fixes (compared to v4.9.302-27-ge4a64678c410)
No metric fixes found.

## Test result summary
total: 55842, pass: 45907, fail: 274, skip: 8635, xfail: 1026

## Build Summary
* arm: 130 total, 130 passed, 0 failed
* arm64: 32 total, 32 passed, 0 failed
* dragonboard-410c: 1 total, 1 passed, 0 failed
* hi6220-hikey: 1 total, 1 passed, 0 failed
* i386: 19 total, 19 passed, 0 failed
* juno-r2: 1 total, 1 passed, 0 failed
* mips: 22 total, 22 passed, 0 failed
* sparc: 12 total, 12 passed, 0 failed
* x15: 2 total, 1 passed, 1 failed
* x86: 1 total, 1 passed, 0 failed
* x86_64: 30 total, 30 passed, 0 failed

## Test suites summary
* fwts
* kselftest-android
* kselftest-bpf
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-firmware
* kselftest-fpu
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kexec
* kselftest-kvm
* kselftest-lib
* kselftest-livepatch
* kselftest-membarrier
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-vm
* kselftest-x86
* kselftest-zram
* kvm-unit-tests
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-controllers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-open-posix-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-tracing-tests
* network-basic-tests
* packetdrill
* perf
* ssuite
* v4l2-compliance

--
Linaro LKFT
https://lkft.linaro.org