[PATCH v2 1/2] PCI: qcom: Fix runtime PM imbalance on probe errors

[PATCH v2 1/2] PCI: qcom: Fix runtime PM imbalance on probe errors

[Johan Hovold]

Drop the leftover pm_runtime_disable() calls from the late probe error
paths that would, for example, prevent runtime PM from being reenabled
after a probe deferral.

Fixes: 6e5da6f7d824 ("PCI: qcom: Fix error handling in runtime PM support")
Cc: stable@vger.kernel.org      # 4.20
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
 drivers/pci/controller/dwc/pcie-qcom.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index 20a0e6533a1c..0b0bd71f1bd2 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -1616,17 +1616,14 @@ static int qcom_pcie_probe(struct platform_device *pdev)
 	pp->ops = &qcom_pcie_dw_ops;
 
 	ret = phy_init(pcie->phy);
-	if (ret) {
-		pm_runtime_disable(&pdev->dev);
+	if (ret)
 		goto err_pm_runtime_put;
-	}
 
 	platform_set_drvdata(pdev, pcie);
 
 	ret = dw_pcie_host_init(pp);
 	if (ret) {
 		dev_err(dev, "cannot initialize host\n");
-		pm_runtime_disable(&pdev->dev);
 		goto err_pm_runtime_put;
 	}
 
-- 
2.35.1

[PATCH v2 2/2] PCI: qcom: Fix unbalanced PHY init on probe errors

[Johan Hovold]

Make sure to undo the PHY initialisation (e.g. balance runtime PM) in
case host initialisation fails during probe.

Fixes: 82a823833f4e ("PCI: qcom: Add Qualcomm PCIe controller driver")
Cc: stable@vger.kernel.org      # 4.5
Cc: Stanimir Varbanov <svarbanov@mm-sol.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
 drivers/pci/controller/dwc/pcie-qcom.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index 0b0bd71f1bd2..df47986bda29 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -1624,11 +1624,13 @@ static int qcom_pcie_probe(struct platform_device *pdev)
 	ret = dw_pcie_host_init(pp);
 	if (ret) {
 		dev_err(dev, "cannot initialize host\n");
-		goto err_pm_runtime_put;
+		goto err_phy_exit;
 	}
 
 	return 0;
 
+err_phy_exit:
+	phy_exit(pcie->phy);
 err_pm_runtime_put:
 	pm_runtime_put(dev);
 	pm_runtime_disable(dev);
-- 
2.35.1

Re: [PATCH v2 1/2] PCI: qcom: Fix runtime PM imbalance on probe errors

[Manivannan Sadhasivam]

On Fri, Apr 01, 2022 at 03:38:53PM +0200, Johan Hovold wrote:
> Drop the leftover pm_runtime_disable() calls from the late probe error
> paths that would, for example, prevent runtime PM from being reenabled
> after a probe deferral.
> 
> Fixes: 6e5da6f7d824 ("PCI: qcom: Fix error handling in runtime PM support")
> Cc: stable@vger.kernel.org      # 4.20
> Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
> Signed-off-by: Johan Hovold <johan+linaro@kernel.org>

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

Thanks,
Mani

> ---
>  drivers/pci/controller/dwc/pcie-qcom.c | 5 +----
>  1 file changed, 1 insertion(+), 4 deletions(-)
> 
> diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
> index 20a0e6533a1c..0b0bd71f1bd2 100644
> --- a/drivers/pci/controller/dwc/pcie-qcom.c
> +++ b/drivers/pci/controller/dwc/pcie-qcom.c
> @@ -1616,17 +1616,14 @@ static int qcom_pcie_probe(struct platform_device *pdev)
>  	pp->ops = &qcom_pcie_dw_ops;
>  
>  	ret = phy_init(pcie->phy);
> -	if (ret) {
> -		pm_runtime_disable(&pdev->dev);
> +	if (ret)
>  		goto err_pm_runtime_put;
> -	}
>  
>  	platform_set_drvdata(pdev, pcie);
>  
>  	ret = dw_pcie_host_init(pp);
>  	if (ret) {
>  		dev_err(dev, "cannot initialize host\n");
> -		pm_runtime_disable(&pdev->dev);
>  		goto err_pm_runtime_put;
>  	}
>  
> -- 
> 2.35.1
> 

Re: [PATCH v2 2/2] PCI: qcom: Fix unbalanced PHY init on probe errors

[Manivannan Sadhasivam]

On Fri, Apr 01, 2022 at 03:38:54PM +0200, Johan Hovold wrote:
> Make sure to undo the PHY initialisation (e.g. balance runtime PM) in
> case host initialisation fails during probe.
> 
> Fixes: 82a823833f4e ("PCI: qcom: Add Qualcomm PCIe controller driver")
> Cc: stable@vger.kernel.org      # 4.5
> Cc: Stanimir Varbanov <svarbanov@mm-sol.com>
> Signed-off-by: Johan Hovold <johan+linaro@kernel.org>

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

Thanks,
Mani

> ---
>  drivers/pci/controller/dwc/pcie-qcom.c | 4 +++-
>  1 file changed, 3 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
> index 0b0bd71f1bd2..df47986bda29 100644
> --- a/drivers/pci/controller/dwc/pcie-qcom.c
> +++ b/drivers/pci/controller/dwc/pcie-qcom.c
> @@ -1624,11 +1624,13 @@ static int qcom_pcie_probe(struct platform_device *pdev)
>  	ret = dw_pcie_host_init(pp);
>  	if (ret) {
>  		dev_err(dev, "cannot initialize host\n");
> -		goto err_pm_runtime_put;
> +		goto err_phy_exit;
>  	}
>  
>  	return 0;
>  
> +err_phy_exit:
> +	phy_exit(pcie->phy);
>  err_pm_runtime_put:
>  	pm_runtime_put(dev);
>  	pm_runtime_disable(dev);
> -- 
> 2.35.1
>