[PATCH 4.9 00/19] 4.9.315-rc1 review

[PATCH 4.9 00/19] 4.9.315-rc1 review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 4.9.315 release.
There are 19 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Wed, 18 May 2022 19:36:02 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.315-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 4.9.315-rc1

Yang Yingliang <yangyingliang@huawei.com>
    tty/serial: digicolor: fix possible null-ptr-deref in digicolor_uart_probe()

Nicolas Dichtel <nicolas.dichtel@6wind.com>
    ping: fix address binding wrt vrf

Sven Schwermer <sven.schwermer@disruptive-technologies.com>
    USB: serial: option: add Fibocom MA510 modem

Sven Schwermer <sven.schwermer@disruptive-technologies.com>
    USB: serial: option: add Fibocom L610 modem

Ethan Yang <etyang@sierrawireless.com>
    USB: serial: qcserial: add support for Sierra Wireless EM7590

Scott Chen <scott@labau.com.tw>
    USB: serial: pl2303: add device id for HP LM930 Display

Sergey Ryazanov <ryazanov.s.a@gmail.com>
    usb: cdc-wdm: fix reading stuck on device close

Mark Brown <broonie@kernel.org>
    ASoC: ops: Validate input values in snd_soc_put_volsw_range()

Mark Brown <broonie@kernel.org>
    ASoC: max98090: Generate notifications on changes for custom control

Mark Brown <broonie@kernel.org>
    ASoC: max98090: Reject invalid values in custom control put()

Ji-Ze Hong (Peter Hong) <hpeter@gmail.com>
    hwmon: (f71882fg) Fix negative temperature

Taehee Yoo <ap420073@gmail.com>
    net: sfc: ef10: fix memory leak in efx_ef10_mtd_probe()

Alexandra Winter <wintera@linux.ibm.com>
    s390/lcs: fix variable dereferenced before check

Alexandra Winter <wintera@linux.ibm.com>
    s390/ctcm: fix potential memory leak

Alexandra Winter <wintera@linux.ibm.com>
    s390/ctcm: fix variable dereferenced before check

Johannes Berg <johannes.berg@intel.com>
    mac80211_hwsim: call ieee80211_tx_prepare_skb under RCU protection

Eric Dumazet <edumazet@google.com>
    netlink: do not reset transport header in netlink_recvmsg()

Lokesh Dhoundiyal <lokesh.dhoundiyal@alliedtelesis.co.nz>
    ipv4: drop dst in multicast routing path

Tariq Toukan <tariqt@nvidia.com>
    net: Fix features skip in for_each_netdev_feature()


-------------

Diffstat:

 Makefile                              |  4 ++--
 drivers/hwmon/f71882fg.c              |  5 +++--
 drivers/net/ethernet/sfc/ef10.c       |  5 +++++
 drivers/net/wireless/mac80211_hwsim.c |  3 +++
 drivers/s390/net/ctcm_mpc.c           |  6 +-----
 drivers/s390/net/ctcm_sysfs.c         |  5 +++--
 drivers/s390/net/lcs.c                |  7 ++++---
 drivers/tty/serial/digicolor-usart.c  |  2 +-
 drivers/usb/class/cdc-wdm.c           |  1 +
 drivers/usb/serial/option.c           |  4 ++++
 drivers/usb/serial/pl2303.c           |  1 +
 drivers/usb/serial/pl2303.h           |  1 +
 drivers/usb/serial/qcserial.c         |  2 ++
 include/linux/netdev_features.h       |  4 ++--
 net/ipv4/ping.c                       | 12 +++++++++++-
 net/ipv4/route.c                      |  1 +
 net/netlink/af_netlink.c              |  1 -
 sound/soc/codecs/max98090.c           |  5 ++++-
 sound/soc/soc-ops.c                   | 18 +++++++++++++++++-
 19 files changed, 66 insertions(+), 21 deletions(-)

[PATCH 4.9 01/19] net: Fix features skip in for_each_netdev_feature()

[Greg Kroah-Hartman]

From: Tariq Toukan <tariqt@nvidia.com>

[ Upstream commit 85db6352fc8a158a893151baa1716463d34a20d0 ]

The find_next_netdev_feature() macro gets the "remaining length",
not bit index.
Passing "bit - 1" for the following iteration is wrong as it skips
the adjacent bit. Pass "bit" instead.

Fixes: 3b89ea9c5902 ("net: Fix for_each_netdev_feature on Big endian")
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Link: https://lore.kernel.org/r/20220504080914.1918-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/netdev_features.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/include/linux/netdev_features.h b/include/linux/netdev_features.h
index b692edeb0b90..27abbd7fbb2b 100644
--- a/include/linux/netdev_features.h
+++ b/include/linux/netdev_features.h
@@ -139,7 +139,7 @@ enum {
 #define NETIF_F_BUSY_POLL	__NETIF_F(BUSY_POLL)
 #define NETIF_F_HW_TC		__NETIF_F(HW_TC)
 
-/* Finds the next feature with the highest number of the range of start till 0.
+/* Finds the next feature with the highest number of the range of start-1 till 0.
  */
 static inline int find_next_netdev_feature(u64 feature, unsigned long start)
 {
@@ -158,7 +158,7 @@ static inline int find_next_netdev_feature(u64 feature, unsigned long start)
 	for ((bit) = find_next_netdev_feature((mask_addr),		\
 					      NETDEV_FEATURE_COUNT);	\
 	     (bit) >= 0;						\
-	     (bit) = find_next_netdev_feature((mask_addr), (bit) - 1))
+	     (bit) = find_next_netdev_feature((mask_addr), (bit)))
 
 /* Features valid for ethtool to change */
 /* = all defined minus driver/device-class-related */
-- 
2.35.1

[PATCH 4.9 02/19] ipv4: drop dst in multicast routing path

[Greg Kroah-Hartman]

From: Lokesh Dhoundiyal <lokesh.dhoundiyal@alliedtelesis.co.nz>

[ Upstream commit 9e6c6d17d1d6a3f1515ce399f9a011629ec79aa0 ]

kmemleak reports the following when routing multicast traffic over an
ipsec tunnel.

Kmemleak output:
unreferenced object 0x8000000044bebb00 (size 256):
  comm "softirq", pid 0, jiffies 4294985356 (age 126.810s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 80 00 00 00 05 13 74 80  ..............t.
    80 00 00 00 04 9b bf f9 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<00000000f83947e0>] __kmalloc+0x1e8/0x300
    [<00000000b7ed8dca>] metadata_dst_alloc+0x24/0x58
    [<0000000081d32c20>] __ipgre_rcv+0x100/0x2b8
    [<00000000824f6cf1>] gre_rcv+0x178/0x540
    [<00000000ccd4e162>] gre_rcv+0x7c/0xd8
    [<00000000c024b148>] ip_protocol_deliver_rcu+0x124/0x350
    [<000000006a483377>] ip_local_deliver_finish+0x54/0x68
    [<00000000d9271b3a>] ip_local_deliver+0x128/0x168
    [<00000000bd4968ae>] xfrm_trans_reinject+0xb8/0xf8
    [<0000000071672a19>] tasklet_action_common.isra.16+0xc4/0x1b0
    [<0000000062e9c336>] __do_softirq+0x1fc/0x3e0
    [<00000000013d7914>] irq_exit+0xc4/0xe0
    [<00000000a4d73e90>] plat_irq_dispatch+0x7c/0x108
    [<000000000751eb8e>] handle_int+0x16c/0x178
    [<000000001668023b>] _raw_spin_unlock_irqrestore+0x1c/0x28

The metadata dst is leaked when ip_route_input_mc() updates the dst for
the skb. Commit f38a9eb1f77b ("dst: Metadata destinations") correctly
handled dropping the dst in ip_route_input_slow() but missed the
multicast case which is handled by ip_route_input_mc(). Drop the dst in
ip_route_input_mc() avoiding the leak.

Fixes: f38a9eb1f77b ("dst: Metadata destinations")
Signed-off-by: Lokesh Dhoundiyal <lokesh.dhoundiyal@alliedtelesis.co.nz>
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20220505020017.3111846-1-chris.packham@alliedtelesis.co.nz
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/route.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/net/ipv4/route.c b/net/ipv4/route.c
index f05b8d63dba3..624bdd74583b 100644
--- a/net/ipv4/route.c
+++ b/net/ipv4/route.c
@@ -1606,6 +1606,7 @@ static int ip_route_input_mc(struct sk_buff *skb, __be32 daddr, __be32 saddr,
 #endif
 	RT_CACHE_STAT_INC(in_slow_mc);
 
+	skb_dst_drop(skb);
 	skb_dst_set(skb, &rth->dst);
 	return 0;
 
-- 
2.35.1

[PATCH 4.9 03/19] netlink: do not reset transport header in netlink_recvmsg()

[Greg Kroah-Hartman]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit d5076fe4049cadef1f040eda4aaa001bb5424225 ]

netlink_recvmsg() does not need to change transport header.

If transport header was needed, it should have been reset
by the producer (netlink_dump()), not the consumer(s).

The following trace probably happened when multiple threads
were using MSG_PEEK.

BUG: KCSAN: data-race in netlink_recvmsg / netlink_recvmsg

write to 0xffff88811e9f15b2 of 2 bytes by task 32012 on cpu 1:
 skb_reset_transport_header include/linux/skbuff.h:2760 [inline]
 netlink_recvmsg+0x1de/0x790 net/netlink/af_netlink.c:1978
 sock_recvmsg_nosec net/socket.c:948 [inline]
 sock_recvmsg net/socket.c:966 [inline]
 __sys_recvfrom+0x204/0x2c0 net/socket.c:2097
 __do_sys_recvfrom net/socket.c:2115 [inline]
 __se_sys_recvfrom net/socket.c:2111 [inline]
 __x64_sys_recvfrom+0x74/0x90 net/socket.c:2111
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae

write to 0xffff88811e9f15b2 of 2 bytes by task 32005 on cpu 0:
 skb_reset_transport_header include/linux/skbuff.h:2760 [inline]
 netlink_recvmsg+0x1de/0x790 net/netlink/af_netlink.c:1978
 ____sys_recvmsg+0x162/0x2f0
 ___sys_recvmsg net/socket.c:2674 [inline]
 __sys_recvmsg+0x209/0x3f0 net/socket.c:2704
 __do_sys_recvmsg net/socket.c:2714 [inline]
 __se_sys_recvmsg net/socket.c:2711 [inline]
 __x64_sys_recvmsg+0x42/0x50 net/socket.c:2711
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae

value changed: 0xffff -> 0x0000

Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 32005 Comm: syz-executor.4 Not tainted 5.18.0-rc1-syzkaller-00328-ge1f700ebd6be-dirty #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Link: https://lore.kernel.org/r/20220505161946.2867638-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netlink/af_netlink.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/net/netlink/af_netlink.c b/net/netlink/af_netlink.c
index a8674e9ff37b..47b1631bf14c 100644
--- a/net/netlink/af_netlink.c
+++ b/net/netlink/af_netlink.c
@@ -1929,7 +1929,6 @@ static int netlink_recvmsg(struct socket *sock, struct msghdr *msg, size_t len,
 		copied = len;
 	}
 
-	skb_reset_transport_header(data_skb);
 	err = skb_copy_datagram_msg(data_skb, 0, msg, copied);
 
 	if (msg->msg_name) {
-- 
2.35.1

[PATCH 4.9 04/19] mac80211_hwsim: call ieee80211_tx_prepare_skb under RCU protection

[Greg Kroah-Hartman]

From: Johannes Berg <johannes.berg@intel.com>

[ Upstream commit 9e2db50f1ef2238fc2f71c5de1c0418b7a5b0ea2 ]

This is needed since it might use (and pass out) pointers to
e.g. keys protected by RCU. Can't really happen here as the
frames aren't encrypted, but we need to still adhere to the
rules.

Fixes: cacfddf82baf ("mac80211_hwsim: initialize ieee80211_tx_info at hw_scan_work")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20220505230421.5f139f9de173.I77ae111a28f7c0e9fd1ebcee7f39dbec5c606770@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/mac80211_hwsim.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c
index a34647efb5ea..2cd1b3cfcc09 100644
--- a/drivers/net/wireless/mac80211_hwsim.c
+++ b/drivers/net/wireless/mac80211_hwsim.c
@@ -1987,11 +1987,13 @@ static void hw_scan_work(struct work_struct *work)
 				memcpy(skb_put(probe, req->ie_len), req->ie,
 				       req->ie_len);
 
+			rcu_read_lock();
 			if (!ieee80211_tx_prepare_skb(hwsim->hw,
 						      hwsim->hw_scan_vif,
 						      probe,
 						      hwsim->tmp_chan->band,
 						      NULL)) {
+				rcu_read_unlock();
 				kfree_skb(probe);
 				continue;
 			}
@@ -1999,6 +2001,7 @@ static void hw_scan_work(struct work_struct *work)
 			local_bh_disable();
 			mac80211_hwsim_tx_frame(hwsim->hw, probe,
 						hwsim->tmp_chan);
+			rcu_read_unlock();
 			local_bh_enable();
 		}
 	}
-- 
2.35.1

[PATCH 4.9 05/19] s390/ctcm: fix variable dereferenced before check

[Greg Kroah-Hartman]

From: Alexandra Winter <wintera@linux.ibm.com>

[ Upstream commit 2c50c6867c85afee6f2b3bcbc50fc9d0083d1343 ]

Found by cppcheck and smatch.
smatch complains about
drivers/s390/net/ctcm_sysfs.c:43 ctcm_buffer_write() warn: variable dereferenced before check 'priv' (see line 42)

Fixes: 3c09e2647b5e ("ctcm: rename READ/WRITE defines to avoid redefinitions")
Reported-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/s390/net/ctcm_sysfs.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/s390/net/ctcm_sysfs.c b/drivers/s390/net/ctcm_sysfs.c
index ddb0aa321339..07b7177abf26 100644
--- a/drivers/s390/net/ctcm_sysfs.c
+++ b/drivers/s390/net/ctcm_sysfs.c
@@ -38,11 +38,12 @@ static ssize_t ctcm_buffer_write(struct device *dev,
 	struct ctcm_priv *priv = dev_get_drvdata(dev);
 	int rc;
 
-	ndev = priv->channel[CTCM_READ]->netdev;
-	if (!(priv && priv->channel[CTCM_READ] && ndev)) {
+	if (!(priv && priv->channel[CTCM_READ] &&
+	      priv->channel[CTCM_READ]->netdev)) {
 		CTCM_DBF_TEXT(SETUP, CTC_DBF_ERROR, "bfnondev");
 		return -ENODEV;
 	}
+	ndev = priv->channel[CTCM_READ]->netdev;
 
 	rc = kstrtouint(buf, 0, &bs1);
 	if (rc)
-- 
2.35.1

[PATCH 4.9 06/19] s390/ctcm: fix potential memory leak

[Greg Kroah-Hartman]

From: Alexandra Winter <wintera@linux.ibm.com>

[ Upstream commit 0c0b20587b9f25a2ad14db7f80ebe49bdf29920a ]

smatch complains about
drivers/s390/net/ctcm_mpc.c:1210 ctcmpc_unpack_skb() warn: possible memory leak of 'mpcginfo'

mpc_action_discontact() did not free mpcginfo. Consolidate the freeing in
ctcmpc_unpack_skb().

Fixes: 293d984f0e36 ("ctcm: infrastructure for replaced ctc driver")
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/s390/net/ctcm_mpc.c | 6 +-----
 1 file changed, 1 insertion(+), 5 deletions(-)

diff --git a/drivers/s390/net/ctcm_mpc.c b/drivers/s390/net/ctcm_mpc.c
index c103fc7efe9f..f2559e20df70 100644
--- a/drivers/s390/net/ctcm_mpc.c
+++ b/drivers/s390/net/ctcm_mpc.c
@@ -624,8 +624,6 @@ static void mpc_rcvd_sweep_resp(struct mpcg_info *mpcginfo)
 		ctcm_clear_busy_do(dev);
 	}
 
-	kfree(mpcginfo);
-
 	return;
 
 }
@@ -1205,10 +1203,10 @@ static void ctcmpc_unpack_skb(struct channel *ch, struct sk_buff *pskb)
 						CTCM_FUNTAIL, dev->name);
 			priv->stats.rx_dropped++;
 			/* mpcginfo only used for non-data transfers */
-			kfree(mpcginfo);
 			if (do_debug_data)
 				ctcmpc_dump_skb(pskb, -8);
 		}
+		kfree(mpcginfo);
 	}
 done:
 
@@ -1998,7 +1996,6 @@ static void mpc_action_rcvd_xid0(fsm_instance *fsm, int event, void *arg)
 		}
 		break;
 	}
-	kfree(mpcginfo);
 
 	CTCM_PR_DEBUG("ctcmpc:%s() %s xid2:%i xid7:%i xidt_p2:%i \n",
 		__func__, ch->id, grp->outstanding_xid2,
@@ -2059,7 +2056,6 @@ static void mpc_action_rcvd_xid7(fsm_instance *fsm, int event, void *arg)
 		mpc_validate_xid(mpcginfo);
 		break;
 	}
-	kfree(mpcginfo);
 	return;
 }
 
-- 
2.35.1

[PATCH 4.9 07/19] s390/lcs: fix variable dereferenced before check

[Greg Kroah-Hartman]

From: Alexandra Winter <wintera@linux.ibm.com>

[ Upstream commit 671bb35c8e746439f0ed70815968f9a4f20a8deb ]

smatch complains about
drivers/s390/net/lcs.c:1741 lcs_get_control() warn: variable dereferenced before check 'card->dev' (see line 1739)

Fixes: 27eb5ac8f015 ("[PATCH] s390: lcs driver bug fixes and improvements [1/2]")
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/s390/net/lcs.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/s390/net/lcs.c b/drivers/s390/net/lcs.c
index 251db0a02e73..4d3caad7e981 100644
--- a/drivers/s390/net/lcs.c
+++ b/drivers/s390/net/lcs.c
@@ -1761,10 +1761,11 @@ lcs_get_control(struct lcs_card *card, struct lcs_cmd *cmd)
 			lcs_schedule_recovery(card);
 			break;
 		case LCS_CMD_STOPLAN:
-			pr_warn("Stoplan for %s initiated by LGW\n",
-				card->dev->name);
-			if (card->dev)
+			if (card->dev) {
+				pr_warn("Stoplan for %s initiated by LGW\n",
+					card->dev->name);
 				netif_carrier_off(card->dev);
+			}
 			break;
 		default:
 			LCS_DBF_TEXT(5, trace, "noLGWcmd");
-- 
2.35.1

[PATCH 4.9 08/19] net: sfc: ef10: fix memory leak in efx_ef10_mtd_probe()

[Greg Kroah-Hartman]

From: Taehee Yoo <ap420073@gmail.com>

[ Upstream commit 1fa89ffbc04545b7582518e57f4b63e2a062870f ]

In the NIC ->probe() callback, ->mtd_probe() callback is called.
If NIC has 2 ports, ->probe() is called twice and ->mtd_probe() too.
In the ->mtd_probe(), which is efx_ef10_mtd_probe() it allocates and
initializes mtd partiion.
But mtd partition for sfc is shared data.
So that allocated mtd partition data from last called
efx_ef10_mtd_probe() will not be used.
Therefore it must be freed.
But it doesn't free a not used mtd partition data in efx_ef10_mtd_probe().

kmemleak reports:
unreferenced object 0xffff88811ddb0000 (size 63168):
  comm "systemd-udevd", pid 265, jiffies 4294681048 (age 348.586s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<ffffffffa3767749>] kmalloc_order_trace+0x19/0x120
    [<ffffffffa3873f0e>] __kmalloc+0x20e/0x250
    [<ffffffffc041389f>] efx_ef10_mtd_probe+0x11f/0x270 [sfc]
    [<ffffffffc0484c8a>] efx_pci_probe.cold.17+0x3df/0x53d [sfc]
    [<ffffffffa414192c>] local_pci_probe+0xdc/0x170
    [<ffffffffa4145df5>] pci_device_probe+0x235/0x680
    [<ffffffffa443dd52>] really_probe+0x1c2/0x8f0
    [<ffffffffa443e72b>] __driver_probe_device+0x2ab/0x460
    [<ffffffffa443e92a>] driver_probe_device+0x4a/0x120
    [<ffffffffa443f2ae>] __driver_attach+0x16e/0x320
    [<ffffffffa4437a90>] bus_for_each_dev+0x110/0x190
    [<ffffffffa443b75e>] bus_add_driver+0x39e/0x560
    [<ffffffffa4440b1e>] driver_register+0x18e/0x310
    [<ffffffffc02e2055>] 0xffffffffc02e2055
    [<ffffffffa3001af3>] do_one_initcall+0xc3/0x450
    [<ffffffffa33ca574>] do_init_module+0x1b4/0x700

Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Fixes: 8127d661e77f ("sfc: Add support for Solarflare SFC9100 family")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Link: https://lore.kernel.org/r/20220512054709.12513-1-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/sfc/ef10.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/net/ethernet/sfc/ef10.c b/drivers/net/ethernet/sfc/ef10.c
index 22bc3dc44298..aa2cef8675f4 100644
--- a/drivers/net/ethernet/sfc/ef10.c
+++ b/drivers/net/ethernet/sfc/ef10.c
@@ -5197,6 +5197,11 @@ static int efx_ef10_mtd_probe(struct efx_nic *efx)
 		n_parts++;
 	}
 
+	if (!n_parts) {
+		kfree(parts);
+		return 0;
+	}
+
 	rc = efx_mtd_add(efx, &parts[0].common, n_parts, sizeof(*parts));
 fail:
 	if (rc)
-- 
2.35.1

[PATCH 4.9 09/19] hwmon: (f71882fg) Fix negative temperature

[Greg Kroah-Hartman]

From: Ji-Ze Hong (Peter Hong) <hpeter@gmail.com>

[ Upstream commit 4aaaaf0f279836f06d3b9d0ffeec7a1e1a04ceef ]

All temperature of Fintek superio hwmonitor that using 1-byte reg will use
2's complement.

In show_temp()
	temp = data->temp[nr] * 1000;

When data->temp[nr] read as 255, it indicate -1C, but this code will report
255C to userspace. It'll be ok when change to:
	temp = ((s8)data->temp[nr]) * 1000;

Signed-off-by: Ji-Ze Hong (Peter Hong) <hpeter+linux_kernel@gmail.com>
Link: https://lore.kernel.org/r/20220418090706.6339-1-hpeter+linux_kernel@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hwmon/f71882fg.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/hwmon/f71882fg.c b/drivers/hwmon/f71882fg.c
index cb28e4b4fb10..b87ca56fb774 100644
--- a/drivers/hwmon/f71882fg.c
+++ b/drivers/hwmon/f71882fg.c
@@ -1590,8 +1590,9 @@ static ssize_t show_temp(struct device *dev, struct device_attribute *devattr,
 		temp *= 125;
 		if (sign)
 			temp -= 128000;
-	} else
-		temp = data->temp[nr] * 1000;
+	} else {
+		temp = ((s8)data->temp[nr]) * 1000;
+	}
 
 	return sprintf(buf, "%d\n", temp);
 }
-- 
2.35.1

[PATCH 4.9 10/19] ASoC: max98090: Reject invalid values in custom control put()

[Greg Kroah-Hartman]

From: Mark Brown <broonie@kernel.org>

[ Upstream commit 2fbe467bcbfc760a08f08475eea6bbd4c2874319 ]

The max98090 driver has a custom put function for some controls which can
only be updated in certain circumstances which makes no effort to validate
that input is suitable for the control, allowing out of spec values to be
written to the hardware and presented to userspace. Fix this by returning
an error when invalid values are written.

Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220420193454.2647908-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/max98090.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/sound/soc/codecs/max98090.c b/sound/soc/codecs/max98090.c
index e7aef841f87d..4aefb13900c2 100644
--- a/sound/soc/codecs/max98090.c
+++ b/sound/soc/codecs/max98090.c
@@ -419,6 +419,9 @@ static int max98090_put_enab_tlv(struct snd_kcontrol *kcontrol,
 
 	val = (val >> mc->shift) & mask;
 
+	if (sel < 0 || sel > mc->max)
+		return -EINVAL;
+
 	*select = sel;
 
 	/* Setting a volume is only valid if it is already On */
-- 
2.35.1

[PATCH 4.9 11/19] ASoC: max98090: Generate notifications on changes for custom control

[Greg Kroah-Hartman]

From: Mark Brown <broonie@kernel.org>

[ Upstream commit 13fcf676d9e102594effc686d98521ff5c90b925 ]

The max98090 driver has some custom controls which share a put() function
which returns 0 unconditionally, meaning that events are not generated
when the value changes. Fix that.

Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220420193454.2647908-2-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/max98090.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/codecs/max98090.c b/sound/soc/codecs/max98090.c
index 4aefb13900c2..1a55f6aecdfe 100644
--- a/sound/soc/codecs/max98090.c
+++ b/sound/soc/codecs/max98090.c
@@ -436,7 +436,7 @@ static int max98090_put_enab_tlv(struct snd_kcontrol *kcontrol,
 		mask << mc->shift,
 		sel << mc->shift);
 
-	return 0;
+	return *select != val;
 }
 
 static const char *max98090_perf_pwr_text[] =
-- 
2.35.1

[PATCH 4.9 12/19] ASoC: ops: Validate input values in snd_soc_put_volsw_range()

[Greg Kroah-Hartman]

From: Mark Brown <broonie@kernel.org>

[ Upstream commit aa22125c57f9e577f0a667e4fa07fc3fa8ca1e60 ]

Check that values written via snd_soc_put_volsw_range() are
within the range advertised by the control, ensuring that we
don't write out of spec values to the hardware.

Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220423131239.3375261-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/soc-ops.c | 18 +++++++++++++++++-
 1 file changed, 17 insertions(+), 1 deletion(-)

diff --git a/sound/soc/soc-ops.c b/sound/soc/soc-ops.c
index 74968ddee49f..90ba5521c189 100644
--- a/sound/soc/soc-ops.c
+++ b/sound/soc/soc-ops.c
@@ -528,7 +528,15 @@ int snd_soc_put_volsw_range(struct snd_kcontrol *kcontrol,
 	unsigned int mask = (1 << fls(max)) - 1;
 	unsigned int invert = mc->invert;
 	unsigned int val, val_mask;
-	int err, ret;
+	int err, ret, tmp;
+
+	tmp = ucontrol->value.integer.value[0];
+	if (tmp < 0)
+		return -EINVAL;
+	if (mc->platform_max && tmp > mc->platform_max)
+		return -EINVAL;
+	if (tmp > mc->max - mc->min + 1)
+		return -EINVAL;
 
 	if (invert)
 		val = (max - ucontrol->value.integer.value[0]) & mask;
@@ -543,6 +551,14 @@ int snd_soc_put_volsw_range(struct snd_kcontrol *kcontrol,
 	ret = err;
 
 	if (snd_soc_volsw_is_stereo(mc)) {
+		tmp = ucontrol->value.integer.value[1];
+		if (tmp < 0)
+			return -EINVAL;
+		if (mc->platform_max && tmp > mc->platform_max)
+			return -EINVAL;
+		if (tmp > mc->max - mc->min + 1)
+			return -EINVAL;
+
 		if (invert)
 			val = (max - ucontrol->value.integer.value[1]) & mask;
 		else
-- 
2.35.1

[PATCH 4.9 13/19] usb: cdc-wdm: fix reading stuck on device close

[Greg Kroah-Hartman]

From: Sergey Ryazanov <ryazanov.s.a@gmail.com>

commit 01e01f5c89773c600a9f0b32c888de0146066c3a upstream.

cdc-wdm tracks whether a response reading request is in-progress and
blocks the next request from being sent until the previous request is
completed. As soon as last user closes the cdc-wdm device file, the
driver cancels any ongoing requests, resets the pending response
counter, but leaves the response reading in-progress flag
(WDM_RESPONDING) untouched.

So if the user closes the device file during the response receive
request is being performed, no more data will be obtained from the
modem. The request will be cancelled, effectively preventing the
WDM_RESPONDING flag from being reseted. Keeping the flag set will
prevent a new response receive request from being sent, permanently
blocking the read path. The read path will staying blocked until the
module will be reloaded or till the modem will be re-attached.

This stuck has been observed with a Huawei E3372 modem attached to an
OpenWrt router and using the comgt utility to set up a network
connection.

Fix this issue by clearing the WDM_RESPONDING flag on the device file
close.

Without this fix, the device reading stuck can be easily reproduced in a
few connection establishing attempts. With this fix, a load test for
modem connection re-establishing worked for several hours without any
issues.

Fixes: 922a5eadd5a3 ("usb: cdc-wdm: Fix race between autosuspend and reading from the device")
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Cc: stable <stable@vger.kernel.org>
Acked-by: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/20220501175828.8185-1-ryazanov.s.a@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/class/cdc-wdm.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/usb/class/cdc-wdm.c
+++ b/drivers/usb/class/cdc-wdm.c
@@ -744,6 +744,7 @@ static int wdm_release(struct inode *ino
 			kill_urbs(desc);
 			spin_lock_irq(&desc->iuspin);
 			desc->resp_count = 0;
+			clear_bit(WDM_RESPONDING, &desc->flags);
 			spin_unlock_irq(&desc->iuspin);
 			desc->manage_power(desc->intf, 0);
 		} else {

[PATCH 4.9 14/19] USB: serial: pl2303: add device id for HP LM930 Display

[Greg Kroah-Hartman]

From: Scott Chen <scott@labau.com.tw>

commit 26a08f8bad3e1f98d3153f939fb8cd330da4cb26 upstream.

Add the device id for the HPLM930Display which is a PL2303GC based
device.

Signed-off-by: Scott Chen <scott@labau.com.tw>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/pl2303.c |    1 +
 drivers/usb/serial/pl2303.h |    1 +
 2 files changed, 2 insertions(+)

--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -95,6 +95,7 @@ static const struct usb_device_id id_tab
 	{ USB_DEVICE(HP_VENDOR_ID, HP_LCM220_PRODUCT_ID) },
 	{ USB_DEVICE(HP_VENDOR_ID, HP_LCM960_PRODUCT_ID) },
 	{ USB_DEVICE(HP_VENDOR_ID, HP_LM920_PRODUCT_ID) },
+	{ USB_DEVICE(HP_VENDOR_ID, HP_LM930_PRODUCT_ID) },
 	{ USB_DEVICE(HP_VENDOR_ID, HP_LM940_PRODUCT_ID) },
 	{ USB_DEVICE(HP_VENDOR_ID, HP_TD620_PRODUCT_ID) },
 	{ USB_DEVICE(CRESSI_VENDOR_ID, CRESSI_EDY_PRODUCT_ID) },
--- a/drivers/usb/serial/pl2303.h
+++ b/drivers/usb/serial/pl2303.h
@@ -133,6 +133,7 @@
 #define HP_TD620_PRODUCT_ID	0x0956
 #define HP_LD960_PRODUCT_ID	0x0b39
 #define HP_LD381_PRODUCT_ID	0x0f7f
+#define HP_LM930_PRODUCT_ID	0x0f9b
 #define HP_LCM220_PRODUCT_ID	0x3139
 #define HP_LCM960_PRODUCT_ID	0x3239
 #define HP_LD220_PRODUCT_ID	0x3524

[PATCH 4.9 15/19] USB: serial: qcserial: add support for Sierra Wireless EM7590

[Greg Kroah-Hartman]

From: Ethan Yang <etyang@sierrawireless.com>

commit 870b1eee2d844727b06e238c121d260bc5645580 upstream.

Add support for Sierra Wireless EM7590 0xc080/0xc081 compositions.

Signed-off-by: Ethan Yang <etyang@sierrawireless.com>
Link: https://lore.kernel.org/r/20220425055840.5693-1-etyang@sierrawireless.com
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/qcserial.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/usb/serial/qcserial.c
+++ b/drivers/usb/serial/qcserial.c
@@ -170,6 +170,8 @@ static const struct usb_device_id id_tab
 	{DEVICE_SWI(0x1199, 0x9090)},	/* Sierra Wireless EM7565 QDL */
 	{DEVICE_SWI(0x1199, 0x9091)},	/* Sierra Wireless EM7565 */
 	{DEVICE_SWI(0x1199, 0x90d2)},	/* Sierra Wireless EM9191 QDL */
+	{DEVICE_SWI(0x1199, 0xc080)},	/* Sierra Wireless EM7590 QDL */
+	{DEVICE_SWI(0x1199, 0xc081)},	/* Sierra Wireless EM7590 */
 	{DEVICE_SWI(0x413c, 0x81a2)},	/* Dell Wireless 5806 Gobi(TM) 4G LTE Mobile Broadband Card */
 	{DEVICE_SWI(0x413c, 0x81a3)},	/* Dell Wireless 5570 HSPA+ (42Mbps) Mobile Broadband Card */
 	{DEVICE_SWI(0x413c, 0x81a4)},	/* Dell Wireless 5570e HSPA+ (42Mbps) Mobile Broadband Card */

[PATCH 4.9 16/19] USB: serial: option: add Fibocom L610 modem

[Greg Kroah-Hartman]

From: Sven Schwermer <sven.schwermer@disruptive-technologies.com>

commit 714adff9a6271b5f1664b04c944b598141ebfe73 upstream.

The L610 modem has 3 USB configurations that are configurable via the AT
command AT+GTUSBMODE={31,32,33} which make the modem enumerate with the
following interfaces, respectively:

31: Modem + NV + MOS + Diag + LOG + AT + AT
32: ECM + Modem + NV + MOS + Diag + LOG + AT + AT
33: RNDIS + Modem + NV + MOS + Diag + LOG + AT + AT

A detailed description of the USB configuration for each mode follows:

+GTUSBMODE: 31
--------------
T:  Bus=03 Lev=01 Prnt=01 Port=06 Cnt=04 Dev#=124 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1782 ProdID=4d10 Rev= 0.00
S:  Manufacturer=FIBOCOM
S:  Product=L610
C:* #Ifs= 7 Cfg#= 1 Atr=e0 MxPwr=400mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

+GTUSBMODE: 32
--------------
T:  Bus=03 Lev=01 Prnt=01 Port=06 Cnt=04 Dev#=122 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1782 ProdID=4d11 Rev= 0.00
S:  Manufacturer=FIBOCOM
S:  Product=L610
C:* #Ifs= 9 Cfg#= 1 Atr=e0 MxPwr=400mA
A:  FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=06 Prot=00
I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=32ms
I:  If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 7 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=08(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

+GTUSBMODE: 33
--------------
T:  Bus=03 Lev=01 Prnt=01 Port=06 Cnt=04 Dev#=126 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1782 ProdID=4d11 Rev= 0.00
S:  Manufacturer=FIBOCOM
S:  Product=L610
C:* #Ifs= 9 Cfg#= 1 Atr=e0 MxPwr=400mA
A:  FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=03
I:* If#= 0 Alt= 0 #EPs= 1 Cls=e0(wlcon) Sub=01 Prot=03 Driver=rndis_host
E:  Ad=82(I) Atr=03(Int.) MxPS=   8 Ivl=4096ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 7 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=08(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Signed-off-by: Sven Schwermer <sven.schwermer@disruptive-technologies.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/option.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -2101,6 +2101,8 @@ static const struct usb_device_id option
 	  .driver_info = RSVD(3) },
 	{ USB_DEVICE(0x1508, 0x1001),						/* Fibocom NL668 (IOT version) */
 	  .driver_info = RSVD(4) | RSVD(5) | RSVD(6) },
+	{ USB_DEVICE(0x1782, 0x4d10) },						/* Fibocom L610 (AT mode) */
+	{ USB_DEVICE_INTERFACE_CLASS(0x1782, 0x4d11, 0xff) },			/* Fibocom L610 (ECM/RNDIS mode) */
 	{ USB_DEVICE(0x2cb7, 0x0104),						/* Fibocom NL678 series */
 	  .driver_info = RSVD(4) | RSVD(5) },
 	{ USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x0105, 0xff),			/* Fibocom NL678 series */

[PATCH 4.9 17/19] USB: serial: option: add Fibocom MA510 modem

[Greg Kroah-Hartman]

From: Sven Schwermer <sven.schwermer@disruptive-technologies.com>

commit 07989eb981d862f7f2be68d233d753f2e7ccc119 upstream.

The MA510 modem has 3 USB configurations that are configurable via the AT
command AT+GTUSBMODE={30,31,32} which make the modem enumerate with the
following interfaces, respectively:

30: Diag + QDSS + Modem + RMNET
31: Diag + Modem + AT + ECM
32: Modem + AT + ECM

The first configuration (30) reuses u-blox R410M's VID/PID with
identical interface configuration.

A detailed description of the USB configuration for each mode follows:

+GTUSBMODE: 30
--------------
T:  Bus=03 Lev=01 Prnt=01 Port=06 Cnt=04 Dev#= 19 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=05c6 ProdID=90b2 Rev= 0.00
S:  Manufacturer=Fibocom MA510 Modem
S:  Product=Fibocom MA510 Modem
S:  SerialNumber=55e2695b
C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=83(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E:  Ad=85(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

+GTUSBMODE: 31
--------------
T:  Bus=03 Lev=01 Prnt=01 Port=06 Cnt=04 Dev#= 99 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=2cb7 ProdID=0106 Rev= 0.00
S:  Manufacturer=Fibocom MA510 Modem
S:  Product=Fibocom MA510 Modem
S:  SerialNumber=55e2695b
C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
A:  FirstIf#= 3 IfCount= 2 Cls=02(comm.) Sub=00 Prot=00
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=82(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fe Prot=ff Driver=option
E:  Ad=84(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether
E:  Ad=86(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
I:  If#= 4 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
I:* If#= 4 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

+GTUSBMODE: 32
--------------
T:  Bus=03 Lev=01 Prnt=01 Port=06 Cnt=04 Dev#=100 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=2cb7 ProdID=010a Rev= 0.00
S:  Manufacturer=Fibocom MA510 Modem
S:  Product=Fibocom MA510 Modem
S:  SerialNumber=55e2695b
C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA
A:  FirstIf#= 2 IfCount= 2 Cls=02(comm.) Sub=00 Prot=00
I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=81(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fe Prot=ff Driver=option
E:  Ad=83(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether
E:  Ad=85(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
I:  If#= 3 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
I:* If#= 3 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Signed-off-by: Sven Schwermer <sven.schwermer@disruptive-technologies.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/option.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -2107,6 +2107,8 @@ static const struct usb_device_id option
 	  .driver_info = RSVD(4) | RSVD(5) },
 	{ USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x0105, 0xff),			/* Fibocom NL678 series */
 	  .driver_info = RSVD(6) },
+	{ USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x0106, 0xff) },			/* Fibocom MA510 (ECM mode w/ diag intf.) */
+	{ USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x010a, 0xff) },			/* Fibocom MA510 (ECM mode) */
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x2cb7, 0x010b, 0xff, 0xff, 0x30) },	/* Fibocom FG150 Diag */
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x2cb7, 0x010b, 0xff, 0, 0) },		/* Fibocom FG150 AT */
 	{ USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x01a0, 0xff) },			/* Fibocom NL668-AM/NL652-EU (laptop MBIM) */

[PATCH 4.9 18/19] ping: fix address binding wrt vrf

[Greg Kroah-Hartman]

From: Nicolas Dichtel <nicolas.dichtel@6wind.com>

commit e1a7ac6f3ba6e157adcd0ca94d92a401f1943f56 upstream.

When ping_group_range is updated, 'ping' uses the DGRAM ICMP socket,
instead of an IP raw socket. In this case, 'ping' is unable to bind its
socket to a local address owned by a vrflite.

Before the patch:
$ sysctl -w net.ipv4.ping_group_range='0  2147483647'
$ ip link add blue type vrf table 10
$ ip link add foo type dummy
$ ip link set foo master blue
$ ip link set foo up
$ ip addr add 192.168.1.1/24 dev foo
$ ip addr add 2001::1/64 dev foo
$ ip vrf exec blue ping -c1 -I 192.168.1.1 192.168.1.2
ping: bind: Cannot assign requested address
$ ip vrf exec blue ping6 -c1 -I 2001::1 2001::2
ping6: bind icmp socket: Cannot assign requested address

CC: stable@vger.kernel.org
Fixes: 1b69c6d0ae90 ("net: Introduce L3 Master device abstraction")
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/ping.c |   12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

--- a/net/ipv4/ping.c
+++ b/net/ipv4/ping.c
@@ -302,6 +302,7 @@ static int ping_check_bind_addr(struct s
 	struct net *net = sock_net(sk);
 	if (sk->sk_family == AF_INET) {
 		struct sockaddr_in *addr = (struct sockaddr_in *) uaddr;
+		u32 tb_id = RT_TABLE_LOCAL;
 		int chk_addr_ret;
 
 		if (addr_len < sizeof(*addr))
@@ -315,7 +316,8 @@ static int ping_check_bind_addr(struct s
 		pr_debug("ping_check_bind_addr(sk=%p,addr=%pI4,port=%d)\n",
 			 sk, &addr->sin_addr.s_addr, ntohs(addr->sin_port));
 
-		chk_addr_ret = inet_addr_type(net, addr->sin_addr.s_addr);
+		tb_id = l3mdev_fib_table_by_index(net, sk->sk_bound_dev_if) ? : tb_id;
+		chk_addr_ret = inet_addr_type_table(net, addr->sin_addr.s_addr, tb_id);
 
 		if (addr->sin_addr.s_addr == htonl(INADDR_ANY))
 			chk_addr_ret = RTN_LOCAL;
@@ -355,6 +357,14 @@ static int ping_check_bind_addr(struct s
 			if (!dev) {
 				rcu_read_unlock();
 				return -ENODEV;
+			}
+		}
+
+		if (!dev && sk->sk_bound_dev_if) {
+			dev = dev_get_by_index_rcu(net, sk->sk_bound_dev_if);
+			if (!dev) {
+				rcu_read_unlock();
+				return -ENODEV;
 			}
 		}
 		has_addr = pingv6_ops.ipv6_chk_addr(net, &addr->sin6_addr, dev,

[PATCH 4.9 19/19] tty/serial: digicolor: fix possible null-ptr-deref in digicolor_uart_probe()

[Greg Kroah-Hartman]

From: Yang Yingliang <yangyingliang@huawei.com>

commit 447ee1516f19f534a228dda237eddb202f23e163 upstream.

It will cause null-ptr-deref when using 'res', if platform_get_resource()
returns NULL, so move using 'res' after devm_ioremap_resource() that
will check it to avoid null-ptr-deref.
And use devm_platform_get_and_ioremap_resource() to simplify code.

Fixes: 5930cb3511df ("serial: driver for Conexant Digicolor USART")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Baruch Siach <baruch@tkos.co.il>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220505124621.1592697-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/digicolor-usart.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/tty/serial/digicolor-usart.c
+++ b/drivers/tty/serial/digicolor-usart.c
@@ -476,10 +476,10 @@ static int digicolor_uart_probe(struct p
 		return PTR_ERR(uart_clk);
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	dp->port.mapbase = res->start;
 	dp->port.membase = devm_ioremap_resource(&pdev->dev, res);
 	if (IS_ERR(dp->port.membase))
 		return PTR_ERR(dp->port.membase);
+	dp->port.mapbase = res->start;
 
 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0)

Re: [PATCH 4.9 00/19] 4.9.315-rc1 review

[Florian Fainelli]

On 5/16/2022 12:36 PM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.9.315 release.
> There are 19 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 18 May 2022 19:36:02 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.315-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

On ARCH_BRCMSTB using 32-bit and 64-bit ARM kernels:

Tested-by: Florian Fainelli <f.fainelli@gmail.com>
-- 
Florian

Re: [PATCH 4.9 00/19] 4.9.315-rc1 review

[Shuah Khan]

On 5/16/22 1:36 PM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.9.315 release.
> There are 19 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 18 May 2022 19:36:02 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.315-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

Tested-by: Shuah Khan <skhan@linuxfoundation.org>

thanks,
-- Shuah

Re: [PATCH 4.9 00/19] 4.9.315-rc1 review

[Jon Hunter]

On Mon, 16 May 2022 21:36:13 +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.9.315 release.
> There are 19 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 18 May 2022 19:36:02 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.315-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

All tests passing for Tegra ...

Test results for stable-v4.9:
    8 builds:	8 pass, 0 fail
    16 boots:	16 pass, 0 fail
    32 tests:	32 pass, 0 fail

Linux version:	4.9.315-rc1-gf71a7b332169
Boards tested:	tegra124-jetson-tk1, tegra20-ventana,
                tegra210-p2371-2180, tegra30-cardhu-a04

Tested-by: Jon Hunter <jonathanh@nvidia.com>

Jon

Re: [PATCH 4.9 00/19] 4.9.315-rc1 review

[Guenter Roeck]

On Mon, May 16, 2022 at 09:36:13PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.9.315 release.
> There are 19 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 18 May 2022 19:36:02 +0000.
> Anything received after that time might be too late.
> 

Build results:
	total: 163 pass: 163 fail: 0
Qemu test results:
	total: 397 pass: 397 fail: 0

Tested-by: Guenter Roeck <linux@roeck-us.net>

Guenter

Re: [PATCH 4.9 00/19] 4.9.315-rc1 review

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 661 bytes --]

Hi!

> This is the start of the stable review cycle for the 4.9.315 release.
> There are 19 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.

CIP testing did not find any problems here:

https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/tree/linux-4.9.y

Tested-by: Pavel Machek (CIP) <pavel@denx.de>

Best regards,
                                                                Pavel

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 195 bytes --]

Re: [PATCH 4.9 00/19] 4.9.315-rc1 review

[Naresh Kamboju]

On Tue, 17 May 2022 at 01:07, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 4.9.315 release.
> There are 19 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 18 May 2022 19:36:02 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.315-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>

## Build
* kernel: 4.9.315-rc1
* git: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
* git branch: linux-4.9.y
* git commit: f71a7b3321693ff2eb8f97a521ad23ca53934428
* git describe: v4.9.314-20-gf71a7b332169
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-4.9.y/build/v4.9.314-20-gf71a7b332169

## Test Regressions (compared to v4.9.313-8-g0d0d580b3778)
No test regressions found.

## Metric Regressions (compared to v4.9.313-8-g0d0d580b3778)
No metric regressions found.

## Test Fixes (compared to v4.9.313-8-g0d0d580b3778)
No test fixes found.

## Metric Fixes (compared to v4.9.313-8-g0d0d580b3778)
No metric fixes found.

## Test result summary
total: 80137, pass: 63338, fail: 858, skip: 13732, xfail: 2209

## Build Summary
* arm: 238 total, 238 passed, 0 failed
* arm64: 32 total, 32 passed, 0 failed
* dragonboard-410c: 1 total, 1 passed, 0 failed
* hi6220-hikey: 1 total, 1 passed, 0 failed
* i386: 19 total, 19 passed, 0 failed
* juno-r2: 1 total, 1 passed, 0 failed
* mips: 22 total, 22 passed, 0 failed
* sparc: 12 total, 12 passed, 0 failed
* x15: 1 total, 1 passed, 0 failed
* x86: 1 total, 1 passed, 0 failed
* x86_64: 31 total, 31 passed, 0 failed

## Test suites summary
* fwts
* igt-gpu-tools
* kselftest-android
* kselftest-arm64
* kselftest-bpf
* kselftest-breakpoints
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-drivers
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-firmware
* kselftest-fpu
* kselftest-futex
* kselftest-gpio
* kselftest-inte[
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kexec
* kselftest-kvm
* kselftest-lib
* kselftest-livepatch
* kselftest-membarrier
* kselftest-openat2
* kselftest-pid_namespace
* kselftest-pidfd
* kselftest-proc
* kselftest-pstore
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-vm
* kselftest-x86
* kselftest-zram
* kvm-unit-tests
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-controllers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-open-posix-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-tracing-tests
* network-basic-tests
* packetdrill
* perf
* ssuite
* v4l2-compliance
* vdso

--
Linaro LKFT
https://lkft.linaro.org