From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
stable@vger.kernel.org,
Sven Schwermer <sven.schwermer@disruptive-technologies.com>,
Johan Hovold <johan@kernel.org>
Subject: [PATCH 4.19 25/32] USB: serial: option: add Fibocom L610 modem
Date: Mon, 16 May 2022 21:36:39 +0200 [thread overview]
Message-ID: <20220516193615.520304552@linuxfoundation.org> (raw)
In-Reply-To: <20220516193614.773450018@linuxfoundation.org>
From: Sven Schwermer <sven.schwermer@disruptive-technologies.com>
commit 714adff9a6271b5f1664b04c944b598141ebfe73 upstream.
The L610 modem has 3 USB configurations that are configurable via the AT
command AT+GTUSBMODE={31,32,33} which make the modem enumerate with the
following interfaces, respectively:
31: Modem + NV + MOS + Diag + LOG + AT + AT
32: ECM + Modem + NV + MOS + Diag + LOG + AT + AT
33: RNDIS + Modem + NV + MOS + Diag + LOG + AT + AT
A detailed description of the USB configuration for each mode follows:
+GTUSBMODE: 31
--------------
T: Bus=03 Lev=01 Prnt=01 Port=06 Cnt=04 Dev#=124 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1782 ProdID=4d10 Rev= 0.00
S: Manufacturer=FIBOCOM
S: Product=L610
C:* #Ifs= 7 Cfg#= 1 Atr=e0 MxPwr=400mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+GTUSBMODE: 32
--------------
T: Bus=03 Lev=01 Prnt=01 Port=06 Cnt=04 Dev#=122 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1782 ProdID=4d11 Rev= 0.00
S: Manufacturer=FIBOCOM
S: Product=L610
C:* #Ifs= 9 Cfg#= 1 Atr=e0 MxPwr=400mA
A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=06 Prot=00
I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=32ms
I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 7 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=08(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+GTUSBMODE: 33
--------------
T: Bus=03 Lev=01 Prnt=01 Port=06 Cnt=04 Dev#=126 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1782 ProdID=4d11 Rev= 0.00
S: Manufacturer=FIBOCOM
S: Product=L610
C:* #Ifs= 9 Cfg#= 1 Atr=e0 MxPwr=400mA
A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=03
I:* If#= 0 Alt= 0 #EPs= 1 Cls=e0(wlcon) Sub=01 Prot=03 Driver=rndis_host
E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=4096ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 7 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=08(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Signed-off-by: Sven Schwermer <sven.schwermer@disruptive-technologies.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/serial/option.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -2123,6 +2123,8 @@ static const struct usb_device_id option
.driver_info = RSVD(3) },
{ USB_DEVICE(0x1508, 0x1001), /* Fibocom NL668 (IOT version) */
.driver_info = RSVD(4) | RSVD(5) | RSVD(6) },
+ { USB_DEVICE(0x1782, 0x4d10) }, /* Fibocom L610 (AT mode) */
+ { USB_DEVICE_INTERFACE_CLASS(0x1782, 0x4d11, 0xff) }, /* Fibocom L610 (ECM/RNDIS mode) */
{ USB_DEVICE(0x2cb7, 0x0104), /* Fibocom NL678 series */
.driver_info = RSVD(4) | RSVD(5) },
{ USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x0105, 0xff), /* Fibocom NL678 series */
next prev parent reply other threads:[~2022-05-16 19:43 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-16 19:36 [PATCH 4.19 00/32] 4.19.244-rc1 review Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 4.19 01/32] batman-adv: Dont skb_split skbuffs with frag_list Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 4.19 02/32] hwmon: (tmp401) Add OF device ID table Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 4.19 03/32] net: Fix features skip in for_each_netdev_feature() Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 4.19 04/32] ipv4: drop dst in multicast routing path Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 4.19 05/32] netlink: do not reset transport header in netlink_recvmsg() Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 4.19 06/32] mac80211_hwsim: call ieee80211_tx_prepare_skb under RCU protection Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 4.19 07/32] hwmon: (ltq-cputemp) restrict it to SOC_XWAY Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 4.19 08/32] s390/ctcm: fix variable dereferenced before check Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 4.19 09/32] s390/ctcm: fix potential memory leak Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 4.19 10/32] s390/lcs: fix variable dereferenced before check Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 4.19 11/32] net/sched: act_pedit: really ensure the skb is writable Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 4.19 12/32] net/smc: non blocking recvmsg() return -EAGAIN when no data and signal_pending Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 4.19 13/32] net: sfc: ef10: fix memory leak in efx_ef10_mtd_probe() Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 4.19 14/32] gfs2: Fix filesystem block deallocation for short writes Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 4.19 15/32] hwmon: (f71882fg) Fix negative temperature Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 4.19 16/32] ASoC: max98090: Reject invalid values in custom control put() Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 4.19 17/32] ASoC: max98090: Generate notifications on changes for custom control Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 4.19 18/32] ASoC: ops: Validate input values in snd_soc_put_volsw_range() Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 4.19 19/32] s390: disable -Warray-bounds Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 4.19 20/32] tcp: resalt the secret every 10 seconds Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 4.19 21/32] usb: cdc-wdm: fix reading stuck on device close Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 4.19 22/32] usb: typec: tcpci: Dont skip cleanup in .remove() on error Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 4.19 23/32] USB: serial: pl2303: add device id for HP LM930 Display Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 4.19 24/32] USB: serial: qcserial: add support for Sierra Wireless EM7590 Greg Kroah-Hartman
2022-05-16 19:36 ` Greg Kroah-Hartman [this message]
2022-05-16 19:36 ` [PATCH 4.19 26/32] USB: serial: option: add Fibocom MA510 modem Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 4.19 27/32] slimbus: qcom: Fix IRQ check in qcom_slim_probe Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 4.19 28/32] cgroup/cpuset: Remove cpus_allowed/mems_allowed setup in cpuset_init_smp() Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 4.19 29/32] drm/vmwgfx: Initialize drm_mode_fb_cmd2 Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 4.19 30/32] MIPS: fix allmodconfig build with latest mkimage Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 4.19 31/32] ping: fix address binding wrt vrf Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 4.19 32/32] tty/serial: digicolor: fix possible null-ptr-deref in digicolor_uart_probe() Greg Kroah-Hartman
2022-05-17 4:11 ` [PATCH 4.19 00/32] 4.19.244-rc1 review Shuah Khan
2022-05-17 7:38 ` Jon Hunter
2022-05-17 10:58 ` Sudip Mukherjee
2022-05-17 13:06 ` Samuel Zou
2022-05-17 16:42 ` Naresh Kamboju
2022-05-17 19:30 ` Guenter Roeck
2022-05-17 21:02 ` Pavel Machek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220516193615.520304552@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=johan@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=stable@vger.kernel.org \
--cc=sven.schwermer@disruptive-technologies.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox