From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
stable@vger.kernel.org, Hilda Wu <hildawu@realtek.com>,
Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Subject: [PATCH 5.18 29/35] Bluetooth: btusb: Add Realtek RTL8852C support ID 0x04C5:0x1675
Date: Tue, 9 Aug 2022 20:00:58 +0200 [thread overview]
Message-ID: <20220809175516.135240859@linuxfoundation.org> (raw)
In-Reply-To: <20220809175515.046484486@linuxfoundation.org>
From: Hilda Wu <hildawu@realtek.com>
commit 893fa8bc9952a36fb682ee12f0a994b5817a36d2 upstream.
Add the support ID(0x04c5, 0x1675) to usb_device_id table for
Realtek RTL8852C.
The device info from /sys/kernel/debug/usb/devices as below.
T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=04c5 ProdID=1675 Rev= 0.00
S: Manufacturer=Realtek
S: Product=Bluetooth Radio
S: SerialNumber=00e04c000001
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
Signed-off-by: Hilda Wu <hildawu@realtek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/bluetooth/btusb.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -425,6 +425,8 @@ static const struct usb_device_id blackl
/* Realtek 8852CE Bluetooth devices */
{ USB_DEVICE(0x04ca, 0x4007), .driver_info = BTUSB_REALTEK |
BTUSB_WIDEBAND_SPEECH },
+ { USB_DEVICE(0x04c5, 0x1675), .driver_info = BTUSB_REALTEK |
+ BTUSB_WIDEBAND_SPEECH },
/* Realtek Bluetooth devices */
{ USB_VENDOR_AND_INTERFACE_INFO(0x0bda, 0xe0, 0x01, 0x01),
next prev parent reply other threads:[~2022-08-09 18:25 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-08-09 18:00 [PATCH 5.18 00/35] 5.18.17-rc1 review Greg Kroah-Hartman
2022-08-09 18:00 ` [PATCH 5.18 01/35] x86/speculation: Make all RETbleed mitigations 64-bit only Greg Kroah-Hartman
2022-08-09 18:00 ` [PATCH 5.18 02/35] block: fix default IO priority handling again Greg Kroah-Hartman
2022-08-09 18:00 ` [PATCH 5.18 03/35] tools/vm/slabinfo: Handle files in debugfs Greg Kroah-Hartman
2022-08-09 18:00 ` [PATCH 5.18 04/35] ACPI: video: Force backlight native for some TongFang devices Greg Kroah-Hartman
2022-08-09 18:00 ` [PATCH 5.18 05/35] ACPI: video: Shortening quirk list by identifying Clevo by board_name only Greg Kroah-Hartman
2022-08-09 18:00 ` [PATCH 5.18 06/35] ACPI: APEI: Better fix to avoid spamming the console with old error logs Greg Kroah-Hartman
2022-08-09 18:00 ` [PATCH 5.18 07/35] crypto: arm64/poly1305 - fix a read out-of-bound Greg Kroah-Hartman
2022-08-09 18:00 ` [PATCH 5.18 08/35] KVM: x86: do not report a vCPU as preempted outside instruction boundaries Greg Kroah-Hartman
2022-08-09 18:00 ` [PATCH 5.18 09/35] KVM: x86: do not set st->preempted when going back to user space Greg Kroah-Hartman
2022-08-09 18:00 ` [PATCH 5.18 10/35] KVM: selftests: Make hyperv_clock selftest more stable Greg Kroah-Hartman
2022-08-09 18:00 ` [PATCH 5.18 11/35] KVM: x86/MMU: Zap non-leaf SPTEs when disabling dirty logging Greg Kroah-Hartman
2022-08-09 18:00 ` [PATCH 5.18 12/35] entry/kvm: Exit to user mode when TIF_NOTIFY_SIGNAL is set Greg Kroah-Hartman
2022-08-09 18:00 ` [PATCH 5.18 13/35] KVM: x86: disable preemption while updating apicv inhibition Greg Kroah-Hartman
2022-08-09 18:00 ` [PATCH 5.18 14/35] KVM: x86: disable preemption around the call to kvm_arch_vcpu_{un|}blocking Greg Kroah-Hartman
2022-08-09 18:00 ` [PATCH 5.18 15/35] KVM: selftests: Restrict test region to 48-bit physical addresses when using nested Greg Kroah-Hartman
2022-08-09 18:00 ` [PATCH 5.18 16/35] tools/kvm_stat: fix display of error when multiple processes are found Greg Kroah-Hartman
2022-08-09 18:00 ` [PATCH 5.18 17/35] selftests: KVM: Handle compiler optimizations in ucall Greg Kroah-Hartman
2022-08-09 18:00 ` [PATCH 5.18 18/35] KVM: x86/svm: add __GFP_ACCOUNT to __sev_dbg_{en,de}crypt_user() Greg Kroah-Hartman
2022-08-09 18:00 ` [PATCH 5.18 19/35] arm64: set UXN on swapper page tables Greg Kroah-Hartman
2022-08-09 18:00 ` [PATCH 5.18 20/35] btrfs: zoned: prevent allocation from previous data relocation BG Greg Kroah-Hartman
2022-08-09 18:00 ` [PATCH 5.18 21/35] btrfs: zoned: fix critical section of relocation inode writeback Greg Kroah-Hartman
2022-08-09 18:00 ` [PATCH 5.18 22/35] btrfs: zoned: drop optimization of zone finish Greg Kroah-Hartman
2022-08-09 18:00 ` [PATCH 5.18 23/35] Bluetooth: hci_qca: Return wakeup for qca_wakeup Greg Kroah-Hartman
2022-08-09 18:00 ` [PATCH 5.18 24/35] Bluetooth: hci_bcm: Add BCM4349B1 variant Greg Kroah-Hartman
2022-08-09 18:00 ` [PATCH 5.18 25/35] Bluetooth: hci_bcm: Add DT compatible for CYW55572 Greg Kroah-Hartman
2022-08-09 18:00 ` [PATCH 5.18 26/35] dt-bindings: bluetooth: broadcom: Add BCM4349B1 DT binding Greg Kroah-Hartman
2022-08-09 18:00 ` [PATCH 5.18 27/35] Bluetooth: btusb: Add support of IMC Networks PID 0x3568 Greg Kroah-Hartman
2022-08-09 18:00 ` [PATCH 5.18 28/35] Bluetooth: btusb: Add Realtek RTL8852C support ID 0x04CA:0x4007 Greg Kroah-Hartman
2022-08-09 18:00 ` Greg Kroah-Hartman [this message]
2022-08-09 18:00 ` [PATCH 5.18 30/35] Bluetooth: btusb: Add Realtek RTL8852C support ID 0x0CB8:0xC558 Greg Kroah-Hartman
2022-08-09 18:01 ` [PATCH 5.18 31/35] Bluetooth: btusb: Add Realtek RTL8852C support ID 0x13D3:0x3587 Greg Kroah-Hartman
2022-08-09 18:01 ` [PATCH 5.18 32/35] Bluetooth: btusb: Add Realtek RTL8852C support ID 0x13D3:0x3586 Greg Kroah-Hartman
2022-08-09 18:01 ` [PATCH 5.18 33/35] macintosh/adb: fix oob read in do_adb_query() function Greg Kroah-Hartman
2022-08-09 18:01 ` [PATCH 5.18 34/35] x86/speculation: Add RSB VM Exit protections Greg Kroah-Hartman
2022-08-09 18:01 ` [PATCH 5.18 35/35] x86/speculation: Add LFENCE to RSB fill sequence Greg Kroah-Hartman
2022-08-09 21:47 ` [PATCH 5.18 00/35] 5.18.17-rc1 review Florian Fainelli
2022-08-10 6:16 ` Naresh Kamboju
2022-08-10 12:54 ` Ron Economos
2022-08-10 13:26 ` Sudip Mukherjee (Codethink)
2022-08-10 13:33 ` Guenter Roeck
2022-08-10 14:17 ` Justin Forbes
2022-08-10 14:25 ` Jon Hunter
2022-08-10 14:31 ` Shuah Khan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220809175516.135240859@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=hildawu@realtek.com \
--cc=linux-kernel@vger.kernel.org \
--cc=luiz.von.dentz@intel.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox