From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Biju Das <biju.das.jz@bp.renesas.com>,
Marc Kleine-Budde <mkl@pengutronix.de>,
Sasha Levin <sashal@kernel.org>,
wg@grandegger.com, davem@davemloft.net, edumazet@google.com,
kuba@kernel.org, pabeni@redhat.com, stefan.maetje@esd.eu,
mailhol.vincent@wanadoo.fr, socketcan@hartkopp.net,
linux-can@vger.kernel.org, netdev@vger.kernel.org
Subject: [PATCH AUTOSEL 5.10 36/46] can: sja1000: Add Quirk for RZ/N1 SJA1000 CAN controller
Date: Thu, 11 Aug 2022 12:04:00 -0400 [thread overview]
Message-ID: <20220811160421.1539956-36-sashal@kernel.org> (raw)
In-Reply-To: <20220811160421.1539956-1-sashal@kernel.org>
From: Biju Das <biju.das.jz@bp.renesas.com>
[ Upstream commit 2d99bfbf3386962692dcccd73931cb0db07a1a43 ]
As per Chapter 6.5.16 of the RZ/N1 Peripheral Manual, The SJA1000
CAN controller does not support Clock Divider Register compared to
the reference Philips SJA1000 device.
This patch adds a device quirk to handle this difference.
Link: https://lore.kernel.org/all/20220710115248.190280-4-biju.das.jz@bp.renesas.com
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/can/sja1000/sja1000.c | 8 +++++---
drivers/net/can/sja1000/sja1000.h | 3 ++-
2 files changed, 7 insertions(+), 4 deletions(-)
diff --git a/drivers/net/can/sja1000/sja1000.c b/drivers/net/can/sja1000/sja1000.c
index 25a4d7d0b349..3f2667c07dc3 100644
--- a/drivers/net/can/sja1000/sja1000.c
+++ b/drivers/net/can/sja1000/sja1000.c
@@ -184,8 +184,9 @@ static void chipset_init(struct net_device *dev)
{
struct sja1000_priv *priv = netdev_priv(dev);
- /* set clock divider and output control register */
- priv->write_reg(priv, SJA1000_CDR, priv->cdr | CDR_PELICAN);
+ if (!(priv->flags & SJA1000_QUIRK_NO_CDR_REG))
+ /* set clock divider and output control register */
+ priv->write_reg(priv, SJA1000_CDR, priv->cdr | CDR_PELICAN);
/* set acceptance filter (accept all) */
priv->write_reg(priv, SJA1000_ACCC0, 0x00);
@@ -210,7 +211,8 @@ static void sja1000_start(struct net_device *dev)
set_reset_mode(dev);
/* Initialize chip if uninitialized at this stage */
- if (!(priv->read_reg(priv, SJA1000_CDR) & CDR_PELICAN))
+ if (!(priv->flags & SJA1000_QUIRK_NO_CDR_REG ||
+ priv->read_reg(priv, SJA1000_CDR) & CDR_PELICAN))
chipset_init(dev);
/* Clear error counters and error code capture */
diff --git a/drivers/net/can/sja1000/sja1000.h b/drivers/net/can/sja1000/sja1000.h
index 9d46398f8154..7f736f1df547 100644
--- a/drivers/net/can/sja1000/sja1000.h
+++ b/drivers/net/can/sja1000/sja1000.h
@@ -145,7 +145,8 @@
/*
* Flags for sja1000priv.flags
*/
-#define SJA1000_CUSTOM_IRQ_HANDLER 0x1
+#define SJA1000_CUSTOM_IRQ_HANDLER BIT(0)
+#define SJA1000_QUIRK_NO_CDR_REG BIT(1)
/*
* SJA1000 private data structure
--
2.35.1
next prev parent reply other threads:[~2022-08-11 16:27 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-08-11 16:03 [PATCH AUTOSEL 5.10 01/46] drm/r128: Fix undefined behavior due to shift overflowing the constant Sasha Levin
2022-08-11 16:03 ` [PATCH AUTOSEL 5.10 02/46] ath10k: htt_tx: do not interpret Eth frames as WiFi Sasha Levin
2022-08-11 16:03 ` [PATCH AUTOSEL 5.10 03/46] ath10k: fix misreported tx bandwidth for 160Mhz Sasha Levin
2022-08-11 16:03 ` [PATCH AUTOSEL 5.10 04/46] drm/nouveau: clear output poll workers before nouveau_fbcon_destroy() Sasha Levin
2022-08-11 16:03 ` [PATCH AUTOSEL 5.10 05/46] drm/panfrost: Handle HW_ISSUE_TTRX_2968_TTRX_3162 Sasha Levin
2022-08-13 13:44 ` Pavel Machek
2022-08-11 16:03 ` [PATCH AUTOSEL 5.10 06/46] drm/panfrost: Don't set L2_MMU_CONFIG quirks Sasha Levin
2022-08-11 16:03 ` [PATCH AUTOSEL 5.10 07/46] ath10k: fix regdomain info of iw reg set/get Sasha Levin
2022-08-11 16:03 ` [PATCH AUTOSEL 5.10 08/46] drm/amd/display: Detect dpcd_rev when hotplug mst monitor Sasha Levin
2022-08-11 16:03 ` [PATCH AUTOSEL 5.10 09/46] drm/amd/display: Fix dpp dto for disabled pipes Sasha Levin
2022-08-11 16:03 ` [PATCH AUTOSEL 5.10 10/46] drm/radeon: integer overflow in radeon_mode_dumb_create() Sasha Levin
2022-08-11 16:03 ` [PATCH AUTOSEL 5.10 11/46] drm/radeon: Initialize fences array entries in radeon_sa_bo_next_hole Sasha Levin
2022-08-11 16:03 ` [PATCH AUTOSEL 5.10 12/46] udmabuf: Set the DMA mask for the udmabuf device (v2) Sasha Levin
2022-08-11 16:03 ` [PATCH AUTOSEL 5.10 13/46] net/mlx5: Add HW definitions of vport debug counters Sasha Levin
2022-08-11 16:03 ` [PATCH AUTOSEL 5.10 14/46] drm/amd/display: Fix monitor flash issue Sasha Levin
2022-08-11 16:03 ` [PATCH AUTOSEL 5.10 15/46] selftests: mlxsw: resource_scale: Allow skipping a test Sasha Levin
2022-08-11 16:03 ` [PATCH AUTOSEL 5.10 16/46] net: dsa: ar9331: fix potential dead lock on mdio access Sasha Levin
2022-08-11 16:03 ` [PATCH AUTOSEL 5.10 17/46] media: davinci: vpif: add missing of_node_put() in vpif_probe() Sasha Levin
2022-08-11 16:03 ` [PATCH AUTOSEL 5.10 18/46] media: mediatek: vcodec: prevent kernel crash when scp ipi timeout Sasha Levin
2022-08-11 16:03 ` [PATCH AUTOSEL 5.10 19/46] media: airspy: respect the DMA coherency rules Sasha Levin
2022-08-11 16:03 ` [PATCH AUTOSEL 5.10 20/46] media: pvrusb2: fix memory leak in pvr_probe Sasha Levin
2022-08-11 16:03 ` [PATCH AUTOSEL 5.10 21/46] rcu: Apply noinstr to rcu_idle_enter() and rcu_idle_exit() Sasha Levin
2022-08-11 16:03 ` [PATCH AUTOSEL 5.10 22/46] drm/bridge/tc358775: Fix DSI clock division for vsync delay calculation Sasha Levin
2022-08-11 16:03 ` [PATCH AUTOSEL 5.10 23/46] uprobe: gate bpf call behind BPF_EVENTS Sasha Levin
2022-08-11 16:03 ` [PATCH AUTOSEL 5.10 24/46] rcuscale: Fix smp_processor_id()-in-preemptible warnings Sasha Levin
2022-08-11 16:03 ` [PATCH AUTOSEL 5.10 25/46] mlxsw: cmd: Increase 'config_profile.flood_mode' length Sasha Levin
2022-08-11 16:03 ` [PATCH AUTOSEL 5.10 26/46] media: atmel: atmel-isc-base: allow wb ctrls to be changed when isc is not configured Sasha Levin
2022-08-11 16:03 ` [PATCH AUTOSEL 5.10 27/46] kselftests: Enable the echo command to print newlines in Makefile Sasha Levin
2022-08-11 16:03 ` [PATCH AUTOSEL 5.10 28/46] ipv6/addrconf: fix timing bug in tempaddr regen Sasha Levin
2022-08-11 16:03 ` [PATCH AUTOSEL 5.10 29/46] drm/amdgpu/display/dc: Fix null pointer exception Sasha Levin
2022-08-11 16:03 ` [PATCH AUTOSEL 5.10 30/46] crypto: vmx - Fix warning on p8_ghash_alg Sasha Levin
2022-08-11 16:03 ` [PATCH AUTOSEL 5.10 31/46] drm/nouveau/nvkm: use list_add_tail() when building object tree Sasha Levin
2022-08-11 16:03 ` [PATCH AUTOSEL 5.10 32/46] crypto: ccree - Add missing clk_disable_unprepare() in cc_pm_resume() Sasha Levin
2022-08-11 16:03 ` [PATCH AUTOSEL 5.10 33/46] bpf: Fix check against plain integer v 'NULL' Sasha Levin
2022-08-11 16:03 ` [PATCH AUTOSEL 5.10 34/46] media: rkisp1: Disable runtime PM in probe error path Sasha Levin
2022-08-11 16:03 ` [PATCH AUTOSEL 5.10 35/46] bpf: Don't redirect packets with invalid pkt_len Sasha Levin
2022-08-11 16:04 ` Sasha Levin [this message]
2022-08-11 16:04 ` [PATCH AUTOSEL 5.10 37/46] net/cdc_ncm: Increase NTB max RX/TX values to 64kb Sasha Levin
2022-08-11 16:04 ` [PATCH AUTOSEL 5.10 38/46] Bluetooth: hci_bcm: Add BCM4349B1 variant Sasha Levin
2022-08-11 16:04 ` [PATCH AUTOSEL 5.10 39/46] Bluetooth: Collect kcov coverage from hci_rx_work Sasha Levin
2022-08-11 16:04 ` [PATCH AUTOSEL 5.10 40/46] bpf/selftests: Fix couldn't retrieve pinned program in xdp veth test Sasha Levin
2022-08-11 16:04 ` [PATCH AUTOSEL 5.10 41/46] net: ethernet: stmicro: stmmac: first disable all queues and disconnect in release Sasha Levin
2022-08-11 16:04 ` [PATCH AUTOSEL 5.10 42/46] wifi: rtl8xxxu: Fix the error handling of the probe function Sasha Levin
2022-08-12 19:06 ` [PATCH AUTOSEL 5.10 01/46] drm/r128: Fix undefined behavior due to shift overflowing the constant Pavel Machek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220811160421.1539956-36-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=biju.das.jz@bp.renesas.com \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=kuba@kernel.org \
--cc=linux-can@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mailhol.vincent@wanadoo.fr \
--cc=mkl@pengutronix.de \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=socketcan@hartkopp.net \
--cc=stable@vger.kernel.org \
--cc=stefan.maetje@esd.eu \
--cc=wg@grandegger.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox